which of the following tests is performed to measure the amount of elongation and the yield point of a metal?

Answers

Answer 1

Here are 3 alkali metals with physical and chemical similarity.

What is alkali metals?

Alkali metals are come from the fact that when these metals or their oxides dissolved in water.a basic solution results.

Three alkali metals -

1- hydrogen(H)

2-lithium(Li)

3-potassium(K)

Physical and chemical similarity of hydrogen -

-it is colourless and tasteless in nature.

-it is a combustible gas but not a supporter of combustion.

Physical and chemical similarity of lithium -

-it have a melting point of 180.54

-it is the lightest of all metals,with a density approximately half that of water.

Physical and chemical similarity of pottasium -

- this metal is soft and white with a silver lustre.

-it imparts a lavender colour to a flame, and it's vapour is green.

To know more about alkali metals click-

https://brainly.com/question/19109836

#SPJ4


Related Questions

A particle of mass m moves in the xy plane in a circular path of radius R. Find the magnitude and direction of its angular momentum relative to the origin located at the center of the circle when its velocity is v and its sense of rotation is counterclockwise. 6.

Answers

Since  P = m v, we know that linear momentum

The moment of linear momentum is the angular momentum.

Since  L = m v r, the angular momentum

The particle moving uniformly round has an angular momentum that is not zero. However, because the torque is in the radial direction, the angular momentum of the particle moving in a circular motion is still conserved around the axis of rotation. Thus, the change in angular momentum can be regarded as zero.

When an object's mass (m) and velocity (v) are multiplied, the result is linear momentum (p): p = m*v. The definition of angular momentum (L), with some simplification, is the object's distance from the rotational axis multiplied by the linear momentum: L = mvr.

To know more about momentum, visit:

https://brainly.com/question/24030570

#SPJ4

which of the following statements correctly identifies the energy transfer that takes place as the change represented by the model occurs?

Answers

The model accurately captures the energy transfer that takes place as the change represented by the process, which is exothermic and adds energy to the system as the change occurs.

An exothermic reaction is one in which heat or light are released as forms of energy. As a result, in contrast to an endothermic reaction, energy is transferred into the surroundings in an exothermic reaction. Exothermic  reactions are those that want to the release energy. When bonds are broken in the reactants during exothermic reactions, more energy is released when bonds are formed in the products. Endothermic chemical reactions are those that either use or absorb energy. Condensation of water vapor into rain is an exothermic process that releases heat energy. In endothermic chemical reactions, the reactants absorb heat energy from their surroundings to produce products.

Learn more about exothermic here:

https://brainly.com/question/1194949

#SPJ4

What is the frequency of green light?.

Answers

The frequency of the green light of the electromagnetic spectrum is 5.45 × 10¹⁴ Hz.

The green light is found in the visible region of the electromagnetic spectrum.

An Electromagnetic is a spectrum which is made up of all kind of wave is constitute and electric as well as magnetic field.

The green light which is the constituent of the white light fall under the visible region of the electromagnetic spectrum so it can have the frequency 5.45 × 10¹⁴ Hz.

This frequency is more than the infrared frequency but less than the ultraviolet frequency.

To know more about frequency, visit,

https://brainly.com/question/254161

#SPJ4

studysmarter what is the total energy (in mev ) released in the beta decay of a neutron? express your answer in megaelectron volts to two significant figures.

Answers

The maximal electron energy in neutron beta decay is approximately 782 33 KeV; nevertheless, the number is rounded off here to 783 KeV.

Budget for energy: what is it?Based on the rest masses of the neutron, proton, and electron, 0.782343 MeV is the decay energy for this process for the free neutron.The maximal electron energy in neutron beta decay is approximately 782 33 KeV; nevertheless, the number is rounded off here to 783 KeV. This query falls under the subtopic of Beta decay in nuclear physics, which is a subtopic of the main subject Radioactive decay.We will use a conversion factor (1 MeV = 1.602 x 10-13 J) and the amount of nucleons (protons and neutrons) that make up the nucleus to translate the binding energy into MeV (megaelectron volts) per nucleon.        

To learn more about Binding energy refer to:

https://brainly.com/question/23942204

#SPJ4

in this problem we will consider the collision of two cars initially moving at right angles. we assume that after the collision the cars stick together and travel off as a single unit. the collision is therefore completely inelastic.

Answers

The momentum conservation equation for the east-west components is

[tex]m_{1} u_{1} = v(m_{1} + m_{2} )[/tex]

The momentum conservation equation for the north-south components is

[tex]m_{2} u_{2} = v(m_{1} + m_{2} )[/tex]

The tangent of angle is 1.

Applying the principle of conservation of linear momentum of inelastic collision we get:

[tex]m_{1} u_{1}+ m_{2} u_{2} = v(m_{1} + m_{2} )[/tex]

where [tex]m_{1}[/tex]= mass of car 1

          [tex]m_{2}[/tex]= mass of car 2

          [tex]u_{1}[/tex]= velocity of car 1

          [tex]u_{2}[/tex]= velocity of car 2

          v= velocity after collision

i.e. The momentum conservation equation for the east-west components is written as follows:

[tex]m_{1}( u_{1}cos0)+ m_{2} (u_{2}cos90)= v(m_{1} + m_{2} )[/tex]

= [tex]m_{1} u_{1} = v(m_{1} + m_{2} )[/tex]

Similarly,the momentum conservation equation for the north-south components is written as follows:

[tex]m_{1}( u_{1}sin0)+ m_{2} (u_{2}sin90)= v(m_{1} + m_{2} )[/tex]

=[tex]m_{2} u_{2} = v(m_{1} + m_{2} )\\[/tex]

The tangent of the angle is

[tex]tan\alpha = p_{y} /p_{x} = v(m_{1} +m_{2})/v(m_{1} +m_{2})=1[/tex]

To know more about momentum conservation visit:

https://brainly.com/question/2100626

#SPJ4

calculate the final temperature after 25.0g of chromium at 54.5 c is place in 215g of water at 14.6 c. assume no heat is lost to the surroundings

Answers

215 grams of water are added to a mixture of 25.0 grams of chromium at a final temperature of 14.6 degrees Celsius. 15.1°C is the temperature if no heat is lost to the environment.

According to principle of calorimetry, heat lost by one system is equal to heat gained by another system.

eat change = m*C*∆T

Where, m is mass of system, C is specific heat and ∆T is temperature change.

Let the final temperature be T °C

Heat lost by chromium = -(25.0 g)*(0.45 J/ g °C)* ((T-54.5)°C) = -{11.25 *(T-54.5)} J

Heat gained by water = (215 g)*(4.184 J/ g °C)*((T-14.6 )°C) = {899.56*(T-14.6)} J

Heat lost by chromium = Heat gain by water

-{11.25*(T-54.5)} = 899.56*(T-14.6)

Solving we get T = 15.1

So, final temperature is 15.1 °C

Learn more about temperature  here:

https://brainly.com/question/900679

#SPJ4

the plates of a parallel-plate capacitor in vacuum are 5.00 mm apart and 2.00 m2 in area. a 10.0 kv potential difference is applied across the capacitor. compute (a) the capacitance; (b) the charge on each plate; and (c) the magnitude of the electric field between the plates.

Answers

(a) Capacitance of the parallel plate capacitor is [tex]3.54\times10^{-9} F[/tex]

(b) Charge on each plate is [tex]3.54\times10^{-6} C[/tex]

(c) Magnitude of the electric field between the plates [tex]2\times 10^{5} N/C[/tex]

It is given that the plates of the parallel-plate capacitor in vacuum are 5.00 mm apart and 2.00 [tex]m^{2}[/tex] in area.

It is also given that a 10.0 kv potential difference is applied across the capacitor.

Capacitance of a parallel plate capacitor when the area of its place and the distance between them is given by,

[tex]C=\frac{A\epsilon_{o}}{d}[/tex]

[tex]C=\frac{2\times\8.85\times10^{-12} }{5\times10^{-3} }[/tex]

[tex]C=3.54\times 10^{-9} F[/tex]

When the capacitance and potential difference applied across it is known, charge on each plate of a parallel plate capacitor  is given by,

[tex]q=CV[/tex]

[tex]q=3.54\times10^{-9} \times10000[/tex]

[tex]q=3.54\times10^{-6} C[/tex]

Magnitude of electric field between the plates is given by the expression,

[tex]E=\frac{\sigma}{\epsilon_{o} }=\frac{C}{A\epsilon_{o}}=\frac{CV}{\epsilon_{o}}[/tex]

[tex]E=\frac{3.54\times10^{-9}\times10000 }{8.85\times10^{-12} }[/tex]

[tex]E=2\times10^{5} N/C[/tex]

Learn more about capacitance here:

https://brainly.com/question/14683972

#SPJ4

A particle of mass m=5x10^-27 kg has an initial speed of 2x105 m/s. The particle travels in a straight line and its speed increases to 4x10^5 m/s on a distance of 10 cm. Assuming that the acceleration is constant, the
force exerted on the particle is:
3x10^-15 N
3x10^-20 N
8.65x10^-23N
1.73x10^-22 N

Answers

Answer:

Explanation:

Given:

m = 5·10⁻²⁷ kg

V₁ = 2·10⁵ m/s

V₂ = 4·10⁵ m/s

D = 10cm = 0.10m

_______________

a - ?

The change in kinetic energy is equal to the work:

Ek₂ - Ek₁ = F·D

m·V₂² / 2 - m·V₁² / 2 = F·D

(m/2)·(V₂² - V₁²)  = F·D

Force:

F = (m/2)·(V₂² - V₁²) / D

F =   m·(V₂² - V₁²) / (2·D)

F = (5·10⁻²⁷)·( (4·10⁵)² - (2·10⁵))/ (2·0.10) ≈ 3·10⁻¹⁴ N

four traveling waves are described by the following equations, where all quantities are measured in si units and y represents the displacement.i: y

Answers

The travelling Four waves is T1 = T3 = 2π /21, T2 = T4 = 2π/42.

How to calculated the Four waves?

Wave 1, y1 = 0.12 cos(3x - 21t)

Wave 2, y2 = 0.15sin(6x + 42t)

Wave 3, y3 = 0.13cos(6x + 21t)

Wave 4, y4 = -0.27sin(3x - 42t)

The following provides the travelling wave's general equation:

y = A cos(kx ± ωt)

If we consider phase difference, the value of ω will remain constant.

The initial wave,

ω1 = 21

2π /T1 = 21

T1 = 2π /21

Second wave,

ω2 = 42

2π /T2 = 42

T2 = 2π /42

Regarding the third wave,

ω3 = 21

2π /T3 = 21

T3 = 2π /21

Regarding the fourth wave,

ω4 = 42

2π /T4 = 42

T4 = 2π /42

The equations shown above clearly show that waves 1 and 3 have the same duration. Additionally, waves 2 and 4 have the same duration. This is the necessary remedy as a result.

To Learn more About Four waves refer to:

https://brainly.com/question/9197833

#SPJ4

Duff is a breakdancer whose signature move is spinning around on his head while his body is upside down. Which axis is duff rotating?.

Answers

Answer:

Vertical

Explanation:

The addition of a control group that does not use the drink additive would help Dr. Bloedorn address which of the following threats to internal validity?
a. History
b. Demand characteristics
c. Instrumentation
d. Placebo effects

Answers

Addition of a control group that does not use the drink additive would help Dr. Bloedorn address which of the following threats to internal validity IS history

what is internal validity?

Internal validity makes the conclusions of a causal relationship credible and trustworthy. Without high internal validity, an experiment cannot demonstrate a causal link between two variables. Research example You want to test the hypothesis. that drinking a cup of coffee improves memory.

You want to test the hypothesis that drinking a cup of coffee improves memory. You schedule an equal number of college-aged participants for morning and evening sessions at the laboratory. For convenience, you assign all morning session participants to the treatment group and all evening session participants to the control group.

learn more about internal validity:https://brainly.com/question/28750201

#SPJ4

a roulette wheel contains the numbers 0, 00, and 1 to 36. if you bet $1 on a single number coming up, you earn $35 if the number comes up and lose $1 otherwise. find the mean and standard deviation of your winnings on a single bet. then find the mean and standard deviation of your net winnings if you make 100 bets. you can assume (realistically) that the results of the 100 spins are independent. finally, provide an interval such that you are 95% sure your net winnings from 100 bets will be inside this interval. (p.233).

Answers

The mean±standard deviation of your profits from a single wager will be P=0.74

What does an usual deviation mean?

The term "standard deviation" refers to a measurement of the data's divergence from the mean (or ""). The idea that the data are centered around the mean when the variance is low is opposed to the idea that the data are more dispersed when the mean difference is high.

What is a standard deviation example?

The data's degree of departure from the mean is indicated by the standard deviation. It is beneficial to compare data sets that can have a similar median but a distinct range. For instance, the mean of the two integers 15, 15, 15, 14, 16, & 2, 7, 14, 22, 30 is the same. However, the second is definitely more spread.

To know  more  about standard deviation visit:

https://brainly.com/question/16555520

#SPJ4

Is it true or false

1. The coefficient of static friction is always greater than the coefficient of kinetic friction.

2. Newton's first law of motion relates an object's acceleration to the net force acting on it.

3. The equilibrant force has same magnitude as the resultant force as well as same direction.

4. An object is held at rest on an inclined plane will have two components of its weight; Fax
which is parallel to the plane and F, which is perpendicular to the plane.

5. When a projectile is launched horizontally, the acceleration along x- direction is always
equals to 9.8 m/s².

Answers

In the given statement about forces both TRUE and FALSE statement contains.

1. The coefficient of static friction is always greater than the coefficient of kinetic friction. FALSE

2. Newton's first law of motion relates an object's acceleration to the net force acting on it.FALSE

3. The equilibrant force has same magnitude as the resultant force as well as same direction.FALSE

4. An object is held at rest on an inclined plane will have two components of its weight; Fax. which is parallel to the plane and F, which is perpendicular to the plane.TRUE

5. When a projectile is launched horizontally, the acceleration along x- direction is always equals to 9.8 m/s².FALSE

To know more about  force visit : brainly.com/question/13191643

#SPJ1

A bird flies straight northeast a distance of 95. 0 km for 3. 0 h. With the x-axis due east and the y-axis due north, what is the displacement in unit vector notation for the bird? what is the average velocity for the trip?.

Answers

Displacement in unit vector is  85i + 85j.

If so, what is its vector?

When moving from one location to another, the displacement vector resembles an arrow, with its tip at the second point and its tail at the first. The length of the arrow is a symbol for the displacement vector's magnitude, which represents the distance between the locations.

Calculation:

The mathematical notation for the displacement vector R is given by

R cosφi + R sinφj

Now a bird flies straight northeast a distance of 95.0 km for 3.0 h such that x-axis points towards east and the y-axis points towards north.

Now put R = 95 and φ =  45

95.0 cos 45°i + 95.0 sin j  = 95.0i / √2 + 95.0j / √2  =  85i + 85j

Therefore, displacement vector is 85i + 85j.

To know more about Displacement visit:-

https://brainly.com/question/11934397

#SPJ4

a 750kg car with an initial speed of 110km/hr is observed to coast up a hill to a height of 22m above its starting point, how much thermal energy was generated by friction

Answers

A 750kg car with an initial speed of 110km/hr is observed to coast up a hill to a height of 22m above its starting point, how much thermal energy was generated by friction.  188462 J

Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material factors sliding against each other. There are numerous kinds of friction:

while surfaces in touch pass relative to every other, the friction between the 2 surfaces converts kinetic strength into thermal energy (this is, it converts paintings to warmth). This belongings may have dramatic results, as illustrated through using friction created by rubbing pieces of wooden together to start a fireplace. Kinetic power is transformed to thermal electricity every time motion with friction happens, as an example while a viscous fluid is stirred. every other vital consequence of many varieties of friction may be wear, which might also cause overall performance degradation or damage to additives. Friction is a component of the technology of tribology.

Learn more thermal energy here:-

https://brainly.com/question/19666326

#SPJ4

TRUE/FALSE. a planet orbiting another star is made primarily of hydrogen and helium and has approximately the same mass as jupiter but is the same size as neptune.

Answers

A planet orbiting another star is made primarily of hydrogen and helium and has approximately the same mass as jupiter but is the same size as neptune. This statement is false.

The given statement is false, because this statement is contradictory. Hydrogen-helium planet would have to be more gravitationally compressed in order to be smaller than Jupiter. So it would have to have a larger mass than Jupiter and also a planet with that size and mass would be too dense to be made of helium and hydrogen.

To learn more about planet orbiting visit the link- https://brainly.com/question/14545297

#SPJ4

Which of the following is the most likely cause for the increase in pressure observed in the container as the reaction reaches equilibrium?
C. An increase in the number of molecules, which increases the frequency of collisions with the walls of the container

Answers

The pressure increases due to the frequency of collisions between molecules and the container walls increases.

What is kinetic theory of matter?c) an increase in the number of molecules, which increase the frequency of collisions with the walls of the container.When in a chemical reaction the amount of mole of products is greater than the amount of mole of reagents, an increase in pressure is observed upon reaching equilibrium.Increases in temperature can also produce an increase in pressure although in some cases an increase in temperature may occur under isobar conditions (constant pressure).The kinetic theory of matter states that all matter consists of numerous small particles which are in constant motion, colliding with one another.When the temperature of a gas is increases within a closed container, the average kinetic energy of the gas increases.Thus, when the temperature of a gas is increases within a closed container, pressure increases due to the frequency of collisions between molecules and the container walls increases.

To learn more about collisions refer to;

https://brainly.com/question/21319821

#SPJ4

A wave has a wavelength of 5 m and a speed of 65 m/s. what is the frequency of this wave in hz?

Answers

The frequency of a wave that has a length of 5 m and a speed of 65 m is 13 Hz

Wave frequency

The wave frequency formula is a way of calculating the number of waves in a unit of time.

The frequency is denoted by (f) which can be calculated using the formula for the number of vibrations divided by the time of vibration or n/t.

In waves, the following equation applies:

v = s/t = λ/T = λf

So, the frequency of a wave that has a length of 5 m and a speed of 65 m is:

f = v/λ

= 65/5

= 13 Hz

Learn more about wave frequency here: https://brainly.com/question/1807992

#SPJ4

calculate the mechanical advantage of a wrench that allows you to move a bolt 0.01 m by moving the handle 0.50 m.

Answers

The wrench's mechanical advantage is 50 when you can move a bolt 0.01 m by moving the handle 0.50 m.

What is meant by mechanical advantage?For the purpose of analyzing the forces in basic machines like levers and pulleys, mechanical advantage, which is a ratio of output force to input force in a system, is used. The conservation of energy still holds true and the output and input energies are equal, despite changes in the forces that are applied. We would have a mechanical advantage of four, for instance, if we had two pulleys attached to the rafter, two pulleys attached to the weight, one end attached to the rafter, and a person standing on the rafter pulling the rope. Using a tool or machine can increase a force by a certain amount, which is known as mechanical advantage.

Therefore,

Mechanical Advantage = output force/input force

MA = .50/.01

MA = 50

Answer is 50

To learn more about mechanical advantage, refer to:

https://brainly.com/question/18345299

#SPJ4

An ideal air-filled parallel-plate capacitor has round plates and carries a fixed amount of equal but opposite charge on its plates. All the geometric parameters of the capacitor (plate diameter and plate separation) are now doubled. If the original capacitance was c 0, what is the new capacitance?.

Answers

the new capacitance is 2Co.

What is capacitance?

Capacitance is a property of an electric conductor or group of conductors measured by the amount of separated electric charge that may be held on it per unit change in electrical potential. The SI unit of electrical capacitance is Farad which is represented by the symbol F. It is calculated by Co = εo(πd2)/L

where,

εo = electrostatic constant

d = diameter

L = distance between the plates

here,

diameter becomes doubled = 2d

distance between the plates is doubled = 2L

Co = εo(πd2)/L

so,

new capacitance = ε[tex]_{o}[/tex](π [tex](2d)^{2} )/(2L)[/tex]

new capacitance = ε[tex]_{o}[/tex](π [tex](4d} )/(2L)[/tex]

so comparing with original capacitance,

new capacitance = 2Co

the new capacitance is 2Co.

To know moe about capacitance, check out:

https://brainly.com/question/27393410

#SPJ4

Equal volumes of propane, C3H8, and carbon monoxide at the same temperature and pressure have the same: 1. Density 2. number of molecules 3. number of atoms A. 1 only B. 2 only C. 3 only D. 1 and 2 only E. 1, 2 and 3 only

Answers

In this statement of propane  molecules answer is E - 1,2 and 3 only.

What is propane?

propane and carbon are the  monoxide have differentions properties. They do not have- the same density or the  ability to combust. And  Propane has 11 atoms per the  molecule and carbon to  monoxide has only two.

Sol-Robert Rose hypothesis says that all gases will have the same number of molecules under the same conditions. Alejandro said that if all gases have the same volumes, they should have the same number of Molecules or moles. Boulding was directly proportional to the number of moles and the volume was proportional to the evolve mole.

To know more about propane click -

https://brainly.com/question/19883306

#SPJ4

two lamps , one rated 100w at 220 v , and the other 60w at 220 v , are connected in parallel to electric mains supply. what current is drawn from the line if the supply voltage is 220 v ?

Answers

The current drawn from the line if the supply voltage is 220 v

We are given two lamps

Power of one lamps = 100 W

Power of second lamps = 60 W

Voltage of main supply = 220 V

Total power consumed in the circuit =

100 + 60 = 160 W

Now, using the formula of Power,

P = VI

I = Power/V = 160/220 = 0.727 A

Therefore, 0.727 A current is drawn from the line when the supply voltage is 220 V

Learn more about Current here:

https://brainly.com/question/24858512

#SPJ4

What are the 4 main types of malware?.

Answers

They are the four primary categories of malware.

(1) Adware; (2) Fileless Malware; (3) Viruses; and (4) Worms.

Do viruses count as malware?

Malware is not always a virus, even though all computer viruses are malware. Viruses are only one kind of malware. The phrases viruses and malware are frequently used interchangeably, however they are not the same thing technically.

How can I tell if my computer has malware?

Your computer may be infected with malware if you notice that your homepage has changed or if you have new toolbars, extensions, or plugins installed. There are many different reasons for this, but the most common one is that you clicked on the "congratulations" pop-up and it downloaded some undesirable software.

To know more about Malware visit:

https://brainly.com/question/14276107

#SPJ4

the string in the figure is 50 cm long. when the ball is released from rest, it swings along the dotted arc. how fast is it going at the lowest point in its swing?

Answers

Ball is going at the lowest point in its swing at the speed of 3.1 m/s

PE at upper point = mgr = m x 10 x 50/100

PE = 5m

KE at lowest point = mv^2/2

EV = PE + KE = mv^2/2 = 0

Speed is defined as The rate of change of position of an object in any direction. Speed is measured as the ratio of distance to the time in which the distance was covered

Using Conservation of energy

mv^2/2 = 5 m

v^2 = 10

v = √10 m/s

= 3.1 m/s

Hence, Ball is going at the lowest point in its swing at the speed of 3.1 m/s

Learn more about Speed here:

https://brainly.com/question/3004254

#SPJ4

a disc with moment of intertia 1kgm^2 roatates through its center of mass with angualr velocity 10rads. final angular velcoity

Answers

Final velocity will be 12 m/s, beginning velocity was 2m/s and the object acceleration is 10 m/s.

Angular velocity: what is its mathematical formula?

Equation w = theta / t, where w is the angular velocity, theta is the position angle, and t is the time, denotes the rate at which an object's position angle changes with respect to time.

Equation v = ω × r . The equation of angular velocity can be obtained by rewriting this expression as follows: = r v / |r|2, where |r| stands for the radius's absolute value. All of these variables are vectors.

Your final velocity will be 12 m/s (2 + 10 = 12) if your beginning velocity was 2m/s and the object acceleration is 10 m/s.    

To learn more about Angular velocity refer to:

https://brainly.com/question/20432894

#SPJ4

approximately what percentage of the energy from sunlight is converted into gross primary production? approximately what percentage of the energy from sunlight is converted into gross primary production? 5 0.8 100 25 10

Answers

10% of the energy from sunlight is converted into gross primary production.

What is sunlight?

Sunlight, also known as solar radiation, refers to the incoming light to the Earth that originated from the Sun. This light represents a portion of the electromagnetic spectrum that includes infrared, visible light, and ultraviolet light.

What is energy?

Scientists define energy as the ability to do work. Modern civilization is possible because people have learned how to change energy from one form to another and then use it to do work.

What is gross primary production?

Gross primary production (GPP) is the total amount of carbon dioxide "fixed" by land plants per unit time through the photosynthetic reduction of CO2 into organic compounds.

Know more about gross primary production visit the link

https://brainly.com/question/24732920

#SPJ4

he sand is removed and a 1.0- kg -mass block is placed on each cap. (figure 3) after the caps have moved (if necessary) to reestablish equilibrium, is the right cap higher, lower, or the same height as the left cap?

Answers

The right cap will be at the same height as the left cap.

As  1.0- kg -mass block is placed on each cap after the caps have moved (if necessary) to reestablish equilibrium, after the satisfaction of the condition of the equilibrium, it can be observed that both the caps are at same height.

As equilibrium is  a state of balance between opposing forces or actions. The temperature, pressure, and concentration of the system are all factors that affect equilibrium. When one of these factors changes, the equilibrium of the system is disrupted, and the system readjusts itself until it returns to equilibrium. There are three states of equilibrium namely: Stable equilibrium and Unstable equilibrium. A neutral equilibrium.

Hence, the right cap will be at the same height as the left cap.

To know more about equilibrium here:

https://brainly.com/question/29559310

#SPJ4      

     

Find the tension T in each cable and the magnitude and direction of the force exerted on the strut by the pivot in each of the arrangements in Fig. E11.13. In each case let w be the weight of the suspended crate full of priceless art objects. The strut is uniform and also has weight w. Start each case with a free-body diagram of the strut.

Answers

The dangling box containing precious works of art. A) T=2.6W, 3.28W, 37.6°; B) T=4.1W, 5.39W, 48.8°

(a) Let the tension in the cable be \[T\] . Weight of the suspended object, \[{W_{{\rm{obj}}}} = w\] The angle that the cable makes.

What does magnitude mean to you?

Magnitude in physics is simply described as "distance or quantity." It shows the size or direction that an object moves in either an absolute or relative sense. It is a method of expressing there is something size or range. Magnitude in physics often describes a length or a size.

A magnitude example is what?

A magnitude can be defined as a quantity's size in simple terms. For instance, the Richter scale's measurement of an earthquake's magnitude, which identifies the earthquake's size, typically ranges from 1 to 10.

To know more about Magnitude visit:

https://brainly.com/question/14452091

#SPJ4

Why does the reactivity of metals increase?.

Answers

Reactivity of metal increases with increase in temperature because temperature directly increases the Kinetic Energy of the Electrons. These electron with increased Kinetic Energy vibrate with greater energy and cause more collisions. Hence the Metal's reactivity increases.

What happens to metal reactivity as we go down the group ?

The propensity to lose electrons determines a metal's reactivity. The valence electrons are easily removed as the atomic scale grows, creating positive ions. Moving down the periodic table increases the atomic size of metals. The propensity to acquire electrons affects the reactivity of non-metals.

Metal reactivity increases down groups and declines from left to right throughout periods. Nonmetallic traits are grouped down and increase from left to right. Nonmetal reactivity rises in the left-to-right direction and falls in the downward direction.

Learn more about Reactivity here:

https://brainly.com/question/24866635

#SPJ4

girIs that dichotomous, or “black-and-white,” thinking plays a key role in producing and maintaining dependent personality disorder comes from the _____ perspective.​

Answers

girls that dichotomous, or “black-and-white,” thinking plays a key role in producing and maintaining dependent personality disorder comes from the cognitive-behavioral perspective.​

Cognitive behavioral therapy (CBT) is a speakme remedy that assists you to manipulate your problems by changing the manner you believe you studied and behave. it's most usually used to treat tension and despair, however, may be useful for different mental and physical health troubles.

CBT remedy generally involves efforts to trade thinking styles. these strategies may encompass: studying to understand one's distortions in wondering that are developing issues, after which to reevaluate them in light of truth. Gaining a better understanding of the behavior and motivation of others.

Learn more about cognitive-behavioral here:-https://brainly.com/question/13511297

#SPJ9

Other Questions
What is the main role of all members of the House of Representatives Why is this so important?. ITS A SIMPLE 50 POINT QUESTION! PLEASE HELP! is y = 4 a relation? A Question 1 (4 points) Retake questionWhat is the equation of the line that has a slope of 4 and a y-intercept of -7?A) y = -7x + 4OB) y = -7/4xOC) 4x + 7y= 0D) y = 4x - 7 _______ is a tool used to communicate the distinct attributes of a product; it can be used as a slogan or a theme and often becomes a snapshot of the entire advertising campaign.The media mixA unique selling propositionAn informational appealPufferyA headlineA unique selling proposition In which court the complainant has to file an appeal against the order of acquittal under section 138 of Negotiable Instrument Act?. How does Laertes character development between Act One and Act Five of the play?. What are the 4 possible decisions that can be issued after an appeal?. write the following function that returns true if the list is already sorted in increasing order: def issorted(lst): write a main function that prompts the user to enter a list and displays whether the list is sorted or not. here are sample runs: enter numbers: 1 1 3 4 4 5 7 9 10 30 11 the list is not sorted enter numbers: 1 1 3 4 4 5 7 9 10 30 the list is already sorted this is defined as the ability to perceive, imagine and understand emotions and to use that information in decision-making is called: How can biology be studied at different scales?. for a 16-bit register, you should use the [ select ] bit-wise operation and a [ select ] mask to toggle bits 12, 9, and 4. what is the most important part of a lobbyist's job? which measure captures the variation in ressponses? multiple choice the frequency distribution the median the mode the standard deviation the mean use the distance formula and algebra to show that the set of all points (x, y) that are equidistant from the point (f, k) and the line x true or false? inbound marketing efforts must be tracked along the two dimensions of source and flow. What is the bottom level of party organization?. What is the rule of obtuse angle?. match the alternative medium or process with its definition: question 42 options: performance art installation action paintings happenings conceptual art 1. artworks that track the movements and gestures the artist makes during their production 2. a general tendency, as well as an art movement originating in the 1960s, that emphasizes the ideas behind an artwork over any material production to represent those ideas 3. impromptu art actions, initiated and planned by an artist, the outcome of which is not known in advance 4. artworks that transform the surrounding space in order to become environmental artworks 5. an art action or event that incorporates elements of music, dance, poetry, video, and multimedia technology the individual, group, or organization for which information is intended best describe which of the following? a. receiver b. monitor c. figurehead d. decoder e. communicator TRUE/FALSE. performers must not mix acting methods; they should find a single method that works for them and then strictly adhere to that method's approach.