which one of the following types of electromagnetic wave travels through space the fastest? which one of the following types of electromagnetic wave travels through space the fastest? microwaves infrared ultraviolet radio waves they all travel through space at the same speed.

The delay spread is 44 ns when synchronizing to the LOS component, and 19 ns when synchronizing to the first multipath component.

In your given indoor wireless channel scenario, we have the following components:

1. Line-of-Sight (LOS) component at delay 25 ns
2. First Multipath component at delay 50 ns
3. Second Multipath component at delay 69 ns

When the demodulator synchronizes to the LOS component (25 ns), the delay spread is calculated as the difference between the maximum and minimum delays. In this case:

Delay Spread = Max Delay - LOS Delay = 69 ns - 25 ns = 44 ns

Now, if the demodulator synchronizes to the first multipath component (50 ns), the delay spread is calculated as:

Delay Spread = Max Delay - First Multipath Delay = 69 ns - 50 ns = 19 ns

So, the delay spread is 44 ns.

To learn more about demodulator, refer below:

https://brainly.com/question/29667275

#SPJ11

It will follow a parabolic path. When an irregularly shaped object is dropped, it experiences air resistance, which is a force that acts in the opposite direction to its motion.

The amount of air resistance depends on the size, shape, and speed of the object, as well as the air density and the drag coefficient of the object. If the object feels no air resistance, it means that the force of air resistance is so small that it can be ignored. In this case, the object will follow a parabolic path, which is the path that a freely falling object would follow if there were no air resistance.

A parabolic path is a curved path that follows an equation of the form y = [tex]ax^2 + bx + c[/tex], where a, b, and c are constants. The maximum height of the parabolic path is given by the equation:

[tex]y = -1/2a(x^2 + 2cx + h^2),[/tex]

here h is the maximum height of the path and is given by the equation:

h = [tex](2a + b) \sqrt{(x^2 + 4c^2)}[/tex]

To find the maximum height of the parabolic path for an irregularly shaped object, we would need to know the size, shape, and speed of the object, as well as the air density and the drag coefficient of the object. Once we have these values, we can use the equations above to calculate the maximum height of the parabolic path.  

Learn more about resistance Visit: brainly.com/question/30901006

#SPJ4

A 0.45 kg ball, attached to the end of a horizontal cord, is rotated in a circle of radius 1.3 m on a frictionless horizontal surface. If the cord will break when the tension in it exceeds 75 N, the maximum speed the ball can have is 15.1 m/s

The tension in the cord is provided by the centripetal force required to keep the ball moving in a circle. This force can be calculated using the equation:F = mv^2/r
where F is the centripetal force, m is the mass of the ball, v is its speed, and r is the radius of the circle.If the tension in the cord exceeds 75 N, the cord will break. Therefore, we can set F equal to 75 N and solve for v:
75 N = (0.45 kg) * v^2 / 1.3 m
v^2 = (75 N * 1.3 m) / 0.45 kg
v^2 = 227 m^2/s^2
v = sqrt(227 m^2/s^2) = 15.1 m/s.
Therefore, the maximum speed the ball can have is 15.1 m/s.

To know more about speed, click here https://brainly.com/question/2141628

#SPJ11

Answer: 6.67 × [tex]10^{-6}[/tex] N

Explanation:

(a) and (b) spring scale would read 55kg, (c) 18.15N, (d) 36.85N less than true weight, (e) spring scale would read zero in free fall.

(a) The spring scale would register 55 kg if the lift rose at a steady pace while the woman was inside.

(b) The spring scale would indicate 55 kg if the lift descended at a consistent pace, allowing the woman to experience her actual weight once more.

(c) The net force exerted on the lady is equal to her weight plus the force necessary to give her the upward acceleration if the lift is moving up with an acceleration of 0.33g. The scale during the spring would read 18.15 N.

(d) The woman's weight less the force necessary to give her the downward acceleration makes up the net force acting on her while the lift goes downward with an acceleration of 0.33g. The spring gauge would display

learn more about spring scale here:

https://brainly.com/question/31421332

#SPJ11

Conservation of momentum is a fundamental law in physics, which states that in a closed system, the total momentum remains constant. In the given scenario, if you catch the ball, the momentum of the system will change as you and the skateboard will start moving in the opposite direction to compensate for the momentum of the ball. On the other hand, if you deflect the ball back towards your friend, the momentum of the system will remain constant, but the direction of the momentum will change. In order to minimize your speed on the skateboard, it is recommended to deflect the ball back towards your friend. By doing so, the momentum of the system will remain constant, and the skateboard's speed will not increase. However, it is essential to ensure your safety and take precautions while performing such an experiment.
Hi there! To minimize your speed on the skateboard, you should deflect the object back towards your friend. Let me explain using conservation of momentum:

1. Initially, both you and the skateboard are at rest, so your total momentum is 0.
2. When the heavy ball is thrown towards you, it has a certain momentum (mass of ball × speed).
3. Conservation of momentum states that the total momentum before and after an interaction must be equal.

If you catch the ball, the momentum of the ball will be transferred to you, causing you and the skateboard to move at a higher speed. On the other hand, if you deflect the ball back with the same speed, the ball's momentum will be reversed in direction but maintain the same magnitude.

In this case, your final momentum will be the opposite of the ball's momentum, making the total momentum still 0. Therefore, deflecting the ball back towards your friend will minimize your speed on the skateboard.

To know more about skateboard visit

https://brainly.com/question/30552059

#SPJ11

The velocities of the gliders after the collision depend on the masses and velocities of the gliders before the collision, as well as the type of collision. We can solve the equations based on the conservation of momentum and kinetic energy to find the velocities of the gliders after the collision.

Assuming the gliders are initially moving toward each other, let's call them Glider 1 and Glider 2. Glider 1 has a mass of m1 and is moving towards Glider 2 with velocity v1, while Glider 2 has a mass of m2 and is moving towards Glider 1 with velocity v2.

The approach velocity (v_approach) is the sum of the velocities of Glider 1 and Glider 2, which is [tex]v_{approach} = v_1 + v_2[/tex]. The separation velocity (v_separation) is the difference between their velocities, which is [tex]v_{separation} = v_1 - v_2[/tex].

When the two gliders collide, they will experience a change in momentum, which is equal to the mass times the change in velocity (Δp = mΔv). The law of conservation of momentum states that the total momentum of a system before a collision is equal to the total momentum after the collision, provided there are no external forces acting on the system.

Therefore, we can set up two equations based on the conservation of momentum:

[tex]$m_{1}v_{1} + m_{2}v_{2} = m_{1}v_{1}' + m_{2}v_{2}'$[/tex] (total momentum before collision = total momentum after collision)

[tex]$m_{1}v_{1} + m_{2}v_{2} = (m_{1} + m_{2})v_{\mathrm{cm}}$[/tex] (v_cm is the velocity of the center of mass of the system)

We can also use the fact that the kinetic energy of the system is conserved if the collision is elastic. In an elastic collision, both momentum and kinetic energy are conserved.

Therefore, we can set up another equation based on the conservation of kinetic energy:

[tex]$\frac{1}{2}m_{1}v_{1}^{2} + \frac{1}{2}m_{2}v_{2}^{2} = \frac{1}{2}m_{1}v_{1}'^{2} + \frac{1}{2}m_{2}v_{2}'^{2}$[/tex]

We can solve these equations to find the velocities of the gliders after the collision. However, we need more information about the collision to get exact values. If the collision is perfectly elastic, then we can assume that the kinetic energy is conserved and solve for the velocities. If the collision is inelastic, then some of the kinetic energy will be lost as heat or sound, and the velocities of the gliders after the collision will be lower than in the elastic case.

To learn more about velocities

https://brainly.com/question/30559316

#SPJ4

According to the question the pressure inside the vessel is 101 kPa.

Pressure is the force that is applied to a surface in a given area. It is measured in pascals (Pa). Pressure is generated when a force is applied over an area and is equal to the force divided by the area. Pressure can be generated by a variety of sources including atmospheric pressure, liquids, and gases. Pressure is also related to other physical properties such as temperature, density, and volume.

The pressure of a gas is equal to the number of moles multiplied by the universal gas constant (R) multiplied by the temperature, divided by the volume.

P = (n * R * T) / V

Therefore, the pressure inside the vessel is:

P = (2.00 mol * 8.31 J/mol ∙ K * 30°C) / 20.0 L

P = 101 kPa

To learn more about pressure
https://brainly.com/question/28012687
#SPJ4

The speed of the waves on the 100m length of string with a mass of 55g and a tension of 75N is 36.5 m/s.

To find the speed of the waves, we can use the formula: speed = sqrt(tension/linear_mass_density).

First, we need to calculate the linear mass density (μ) by dividing the mass of the string by its length. Since the mass is given in grams, we convert it to kilograms: 55g = 0.055 kg.

The linear mass density is then μ = 0.055 kg / 100 m = 0.00055 kg/m.

Now, we can use the formula to find the speed of the waves: speed = sqrt(75 N / 0.00055 kg/m) = sqrt(136363.64 m²/s²) = 36.5 m/s.

Thus, the speed of the waves is 36.5 m/s.

Learn more about waves here:

https://brainly.com/question/9615089

#SPJ11

An ideal Carnot engine has an efficiency of 83.0% and performs 4500 J of work every cycle. The energy that is discharged to the lower temperature reservoir every cycles 920J.

The efficiency of an ideal Carnot engine is given by:
efficiency = 1 - (T_cold/T_hot) where T_cold is the temperature of the lower temperature reservoir and T_hot is the temperature of the higher temperature reservoir. From the given efficiency of 83%, we can write:
0.83 = 1 - (T_cold/T_hot). Rearranging this equation, we get:
T_cold/T_hot = 0.17. The ratio of the temperatures is 0.17.Let the energy discharged to the lower temperature reservoir every cycle be Q_cold. The work done by the engine every cycle is 4500 J.
According to the first law of thermodynamics:
Q_hot - Q_cold = 4500 J where Q_hot is the energy absorbed from the higher temperature reservoir every cycle. Using the equation for the ratio of temperatures, we can write:
Q_cold/Q_hot = 0.17.
Rearranging this equation, we get:
Q_cold = 0.17 Q_hot
Substituting this into the first law equation, we get:
Q_hot - 0.17Q_hot = 4500 J.
Simplifying this equation, we get:
0.83Q_hot = 4500 JQ_hot = 4500 J/0.83 = 5421.69 J.
Therefore, the energy discharged to the lower temperature reservoir every cycle is:Q_cold = 0.17Q_hot = 0.17(5421.69 J) ≈ 920 J.

To know more about Carnot engine, click here https://brainly.com/question/11399976

#SPJ11

The amount of heat lost each hour through the window is 3.1 × 10^3 J.To calculate the amount of heat lost, we can use the formula for heat transfer by conduction through a plane wall, which is Q/t = kA(T1 - T2)/d, where Q/t is the rate of heat transfer, k is the thermal conductivity, A is the area, T1 and T2 are the temperatures at the two ends, and d is the thickness of the wall.

     We need to first calculate the temperature difference across the glass, which is (4°C - Tinner). Then, we can substitute the given values into the formula and solve for Q/t. The thermal conductivity of glass is around 0.8 W/m∙K. Converting the units to SI units, we get k = 0.8 J/s∙m∙K. The area of the glass is (2.7 m)(2.4 m) = 6.48 m^2. The thickness of the glass is 9.0 mm = 0.009 m. The temperature at the inner surface is not given, so let's assume it is 20°C. Substituting the values into the formula, we get Q/t = (0.8 J/s∙m∙K)(6.48 m^2)(4°C - 20°C)/(0.009 m) = -3.1 × 10^3 J/s or 3.1 × 10^3 J/h. Therefore, the amount of heat lost each hour through the window is 3.1 × 10^3 J. Answer C is correct.

To learn more about heat lost:

https://brainly.com/question/29698863

#SPJ11

The simplest method to measure population density in a given area is to divide the total population of the area by its land area.

This will give you the number of people per square unit of land. For example, if the population of a city is 100,000 and its land area is 50 square kilometers, the population density would be 2,000 people per square kilometer. This method is easy to use and provides a quick estimate of the population density in an area.
The simplest method to measure population density in a given area is to divide the total population by the area's size (in square units, such as square kilometers or square miles). Population density is typically expressed as people per square unit of area.

To know more about population density visit:

https://brainly.com/question/1581160

#SPJ11

The probability that the ratio of the shorter to the longer segment is less than 1/5 is 1/(5l).


Let's define two random variables X and Y as follows:
- X represents the length of the shorter segment (i.e., AX if the point is chosen to the left of the midpoint M, or BX if the point is chosen to the right of M)
- Y represents the length of the longer segment (i.e., BX if the point is chosen to the left of M, or AX if the point is chosen to the right of M)

Note that X and Y are both continuous random variables, and their joint distribution is uniform over the rectangle R = {(x, y) | 0 ≤ x ≤ l/2, 0 ≤ y ≤ l/2}.

the probability that X/Y < 1/5. This is equivalent to the event {(X, Y) | X/Y < 1/5}, which is the region below the line y = 5x in the rectangle R. To find the probability of this event, we need to compute the area of this region and divide it by the area of R.

The area of the region below the line y = 5x in the rectangle R is given by the integral:
∫[0, l/10] ∫[5x, l/2] dy dx + ∫[l/10, l/2] ∫[0, 5x] dy dx
= ∫[0, l/10] (l/2 - 5x) dx + ∫[l/10, l/2] 5x dx
= (l/2)∫[0, l/10] dx - 5∫[0, l/10] x dx + 5∫[l/10, l/2] x dx
= l/20

The area of the rectangle R is l^2/4. Therefore, the probability that X/Y < 1/5 is given by:
P(X/Y < 1/5) = (area of region below y = 5x) / (area of rectangle R)
= (l/20) / (l^2/4)
= 1 / (5l)

Therefore, the probability that the ratio of the shorter to the longer segment is less than 1/5 is 1/(5l).

Learn more about probability

brainly.com/question/30034780

#SPJ11

The effective spring constant of the water is approximately 12.45 N/m. When the block of wood is floating in the water, it experiences a buoyant force that acts against its weight.

This buoyant force is proportional to the volume of the block of wood displaced by the water. When the block of wood oscillates up and down, it experiences an additional restoring force due to the water's surface tension.

This restoring force can be modelled as a spring force, where the displacement of the block from its equilibrium position is proportional to the force acting on it. This proportionality constant is known as the effective spring constant of the water.

We can use the formula for the frequency of simple harmonic motion, which is given by:

f = (1/2π) × √(k/m)

where f is the frequency, k is the spring constant, and m is the mass of the block.

Solving for k, we get:

k = (4π² × m × f²)

Substituting the given values, we get:

k = (4π² × 0.0499 kg × (2.61 Hz)²) ≈ 12.45 N/m

Therefore, the value of the effective spring constant of the water is approximately 12.45 N/m.

The effective spring constant of the water can be calculated using the formula for the frequency of simple harmonic motion. In this case, the block of wood floats in the water and oscillates up and down with a frequency of 2.61 Hz. By calculating the effective spring constant of the water, we can model the restoring force acting on the block due to the water's surface tension.

To know more about buoyant force, visit:

https://brainly.com/question/21990136

#SPJ11

The speed of sound in air at 30°C will be approximately 349.3 m/s.

we can use the given equation to calculate the speed of sound in air at 30°C.

The equation is:

v = 331 m/s + (0.61 m/s) (t/1°C)

where:

v = speed of sound

t = temperature in °C

We need to calculate the speed of sound at 30°C, so we can substitute t = 30°C in the above equation:

v = 331 m/s + (0.61 m/s) (30°C/1°C)

v = 331 m/s + (0.61 m/s) (30)

v = 331 m/s + 18.3 m/s

v = 349.3 m/s

Therefore, the speed of sound in air at 30°C is approximately 349.3 m/s.

To know more about speed

https://brainly.com/question/1291786

#SPJ1

According to the question to convert from Celsius to Fahrenheit -40°F is -54°F.

Fahrenheit is a temperature scale developed in 1724 by German physicist Daniel Gabriel Fahrenheit. The Fahrenheit scale is the most widely used temperature scale in the United States and its territories. On the Fahrenheit scale, the freezing point of water is 32 degrees, and the boiling point of water is 212 degrees. This scale is sometimes referred to as the "Centigrade Scale." The name Fahrenheit is derived from the German word "Fahre," which means "to travel."

To convert from Celsius to Fahrenheit, use the formula (°C × 9/5) + 32 = °F. Therefore, to convert -40°C to °F, use the formula (-40 × 9/5) + 32 = -54°F.

To learn more about Fahrenheit
https://brainly.com/question/30403835
#SPJ4

If a circuit has L closed loops, B branches, and J junctions the number of independent loop equations is: A.B - J + 1.

A loop is a sequence of instructions that is continually repeated until a certain condition is met. It allows a program to execute a set of instructions multiple times, reducing the amount of code that needs to be written. Loops are one of the most fundamental programming concepts, and can be used to accomplish a wide variety of tasks.

The number of independent loop equations is related to the number of loops, branches, and junctions in the circuit. Next, we need to account for the branches and junctions. Each branch has two ends, and each junction has three or more ends. Therefore, we need B-J equations to account for the branches and junctions.

Putting it all together, we get the final answer of A.B - J + 1 equations, which is the number of independent loop equations in the circuit.

To learn more about loop
https://brainly.com/question/29740538
#SPJ4

The speed of the tip of the rod as it passes the horizontal position is approximately 1.98 m/s.

To arrive at this solution, we can use conservation of energy. When the rod is released from rest, it has only potential energy, which is given by mgh, where m is the mass of the rod, g is the acceleration due to gravity, and h is the height of the center of mass above the horizontal. At the horizontal position, all of the potential energy has been converted into kinetic energy, which is given by (1/2)mv^2, where v is the velocity of the tip of the rod.

Using trigonometry, we can find that the height of the center of mass above the horizontal is (2/3)sin(θ/2), where θ is the initial angle with respect to the horizontal. Plugging in the values, we get h = (2/3)sin(15°) ≈ 0.205 m.

Setting the potential energy equal to the kinetic energy and solving for v, we get:

mgh = (1/2)mv^2

Simplifying and solving for v, we get:

v = sqrt(2gh)

Plugging in the values, we get:

v = sqrt(2 x 9.81 x 0.205) ≈ 1.98 m/s

Therefore, the speed of the tip of the rod as it passes the horizontal position is approximately 1.98 m/s.

To know more about speed, visit:

https://brainly.com/question/28224010

#SPJ11

The magnitude of the change in momentum of the lighter object will be less than the magnitude of the change in momentum of the heavier object.

This is due to the fact that momentum is equal to mass times velocity, and since the mass of the lighter object is less than the mass of the heavier object, it will take less force to move the lighter object the same distance as the heavier object, resulting in a smaller change in momentum.

Additionally, since the force on the two objects is the same, the heavier object will have a greater acceleration due to its greater mass, resulting in a greater change in velocity and thus a greater change in momentum.

Know more about force here

https://brainly.com/question/13191643?referrer=searchResults

#SPJ11

Answer:

The final momentum is zero but the final kinetic energy is positive

Explanation:

A certain voltmeter has an internal resistance of 10,000 Ω and a range from 0 to 100 V. One should connect 90,000 ohm in series.

Option E is correct.

The required equation for series is 1000 = (R + 10 0000) [ 100 / 10 000]

Solving for R gives  ,

                             R  = 90000 ohms

Inner resistance is the obstruction inside a battery, or other voltage sources, that causes a drop in the source voltage when there is a current. A cell can be considered a wellspring of e.m.f. by connecting a resistor in series. A voltage crosses the cell's internal resistance as current moves through it.

The outer opposition can be hand weights, practice tubing, your own body weight, blocks, containers of water, or whatever other article that makes the muscles contract.

Learn more about internal resistance :

brainly.com/question/20595977

#SPJ4

Angular momentum is calculated as product of rotational inertia times rotational velocity.

Define Angular momentum

Any rotating object's property that results from multiplying its moment of inertia by its angular velocity is known as angular momentum. It is a characteristic of rotating bodies determined by the sum of their moment of inertia and angular velocity.

The rotational equivalent of linear momentum is angular momentum, often known as moment of momentum or rotational momentum. It is a conserved quantity, meaning that the total angular momentum of a closed system stays constant, making it a significant physical quantity.

To learn more about angular momentum use:

https://brainly.com/question/4126751

#SPJ4

According to the National Highway Traffic Safety Administration (NHTSA), children must ride in a federally approved safety or booster seat in the rear of the vehicle until they are at least 8 years old or until they reach a height of 4 feet 9 inches (145 cm), whichever comes first.

The National Highway Traffic Safety Administration (NHTSA) is the agency within the U.S. Department of Transportation that works to reduce deaths and injuries and economic costs due to motor vehicle crashes. NHTSA works to deliver safer roads by encouraging Americans to make safer choices when they drive, ride, and walk; advancing lifesaving vehicle safety technologies; and supporting state and local police in their efforts to enforce the rules of the road that protect us all. By researching new vehicle safety technologies, mandating their inclusion on new vehicles, and rooting out defects in vehicles and equipment, NHTSA helps protect Americans when they’re on the road. NHTSA conducts research on how vehicle improvements and other technological advances can better protect people in a crash (crashworthiness) and reduce the likelihood of crashes (crash avoidance).

To know more about vehicle safety please visit

https://brainly.com/question/31839772

#SPJ11

A. the work done on the gas is zero, the gas is equal to the energy transferred by heat, 210 J. and the final temperature of the gas is 358.3 K.

Temperature is a measure of hotness or coldness of an object or substance. It is measured by thermometers using the Celsius (°C) or Fahrenheit (°F) scales. Temperature is an important factor in determining the rate of chemical reactions, the properties of substances, and the state of matter.

a) The work done on the gas is given by the equation:
Work = -PΔV
Since the process is a constant-volume process, the change in volume, ΔV, is zero. Therefore, the work done on the gas is zero.
b) The increase in internal energy of the gas is given by the equation:
ΔU = Q - W
Since the work done on the gas is zero, the increase in internal energy of the gas is equal to the energy transferred by heat, 210 J.
c) The final temperature of the gas is given by the equation:
Q = nCvΔT
where n is the number of moles of the ideal gas, Cv is the molar heat capacity at constant volume, and ΔT is the change in temperature.
Substituting the given values, we get:
210 J = 1.01 mol x (3/2)R x ΔT
Therefore, the final temperature of the gas is:
ΔT = (210 J)/[1.01 mol x (3/2)R] = 53.3 K
Therefore, the final temperature of the gas is 358.3 K.

To learn more about temperature
https://brainly.com/question/26866637
#SPJ4

In a capacitor, the peak current and peak voltage are related by the capacitance of the capacitor and the frequency of the alternating current passing through it. This relationship is given by the formula Ipeak = C x Vpeak x 2πf, where Ipeak is the peak current, Vpeak is the peak voltage, C is the capacitance, f is the frequency of the alternating current, and 2π is a constant.

In a capacitor, the peak current and peak voltage are related by the capacitive reactance (Xc). The capacitive reactance is given by the formula Xc = 1/(2πfC), where f is the frequency of the alternating current (AC) signal, and C is the capacitance of the capacitor.

The peak current (Ip) can be calculated using Ohm's Law: Ip = Vp/Xc, where Vp is the peak voltage. So, the peak current and peak voltage are related through the capacitive reactance in a capacitor.

To know more about capacitor visit:

https://brainly.com/question/17176550

#SPJ11

The volume of the sphere is increasing at a rate of 200.53 mm3/s when the diameter is 80 mm.



We are given that the radius of a sphere is increasing at a rate of 5 mm/s. We need to find the rate at which the volume of the sphere is increasing when the diameter is 80 mm.

Let's first find the radius of the sphere.

The diameter of the sphere is 80 mm, so the radius is half of that, which is 40 mm.

The volume of a sphere with radius r is given by the formula:

V = (4/3)πr3

We need to find dV/dt, which represents the rate at which the volume is changing with respect to time.

To do this, we can use the chain rule:

dV/dt = dV/dr * dr/dt

We already know that dr/dt (the rate at which the radius is changing) is 5 mm/s.

Now, let's find dV/dr (the rate at which the volume changes with respect to the radius):

dV/dr = 4πr2

Substituting r = 40 mm, we get:

dV/dr = 4π(40)2 = 16,000π mm2

Now we can calculate dV/dt:

dV/dt = (dV/dr) * (dr/dt)

dV/dt = (16,000π) * (5) = 80,000π mm3/s

Rounding this to two decimal places, we get:

dV/dt ≈ 200.53 mm3/s

Therefore, the volume of the sphere is increasing at a rate of 200.53 mm3/s when the diameter is 80 mm.

learn more about sphere

https://brainly.com/question/22807400

#SPJ11

A direct answer to your question is that the solar system formed primarily from gas and dust materials.

To explain this further, the solar system is believed to have formed around 4.6 billion years ago from a cloud of gas and dust known as the solar nebula. Over time, gravity caused the nebula to collapse and spin, forming a disk-like structure known as the protoplanetary disk. The center of this disk eventually became the sun, while the remaining materials in the disk clumped together and formed the planets, moons, asteroids, and comets. These materials were primarily made up of hydrogen, helium, and other elements such as carbon, oxygen, nitrogen, and iron.

The solar system primarily formed from two materials: hydrogen and helium. These elements were the most abundant in the early universe and came together under the influence of gravity to form the Sun and other celestial bodies.

To know more about solar system, visit:

https://brainly.com/question/29693826

#SPJ11

The energy delivered to the eardrum when someone whispers a secret in your ear at 20 dB is approximately 1 picowatt.


The amount of energy delivered to the eardrum is determined by the sound pressure level (SPL) of the sound waves. Whispering produces an SPL of around 20 dB, which is considered to be a soft sound. The energy delivered to the eardrum can be calculated using the formula E=I x t, where E is energy, I is intensity, and t is time.  

Assuming a typical ear canal area of 10 mm², the intensity of the sound would be approximately 0.1 microwatts per square meter. Multiplying this by the ear canal area gives an intensity of 1 nanowatt. As the whispering lasts for about 0.1 seconds, the energy delivered to the eardrum would be approximately 1 picowatt.

This amount of energy is very small compared to the energy levels of normal conversation or loud music, which can cause hearing damage over time. However, it is still enough to stimulate the auditory system and allow us to hear the whispered secret.

Learn more about sound here:

https://brainly.com/question/29707602

#SPJ11

Answer:

Explanation:

The closer a planet is to the Sun, the faster it is

At perihelion, the stars advance more quickly in their orbit: at aphelion, they advance more slowly

The time between full moons would be longer if the moon was twice as far away from the earth as it is now

Describe moon.

Because no one was aware that there were any other moons until Galileo Galilei discovered four moons orbiting Jupiter in 1610, Earth's only natural satellite is simply referred to as "the Moon." The word for the Moon in Latin is Luna, which also serves as the primary adjective for all things lunar.

The duration between full moons would lengthen if the moon were twice as far away from the Earth because it would take it longer for one orbit to be completed. As a result, there would be more time between two full moons that occurred quickly after one another.

To learn more about moon use:

https://brainly.com/question/27303153

#SPJ4