The surface motion will typically cease first due to these environmental factors, while the internal seiche motion can continue for much longer. The strength and direction of the wind can also affect the duration of a rocking motion, as surface waves can be easily dispersed by high winds.
A rocking motion is caused by a sudden change in the distribution of water due to events such as earthquakes or tsunamis. It can result in the surface or internal seiche motion. When it comes to which of these rocking motions ceases first, the answer is that the surface motion usually stops first due to wind resistance and other environmental factors.
However, the internal seiche motion can continue for much longer, as it is not affected by these factors in the same way as surface motion. Internal seiches are caused by the changes in density between layers of water in a body of water, which can cause a wave-like motion that can travel through the water over long distances.
These waves are typically slower and less noticeable than surface waves, but they can still cause significant damage in certain circumstances. When it comes to stopping a rocking motion, there are several factors that can influence the duration of the motion. One of the most significant factors is the depth of the water, as waves will continue to propagate until they reach the bottom of the body of water.
To nknow more about motion visit :
https://brainly.com/question/15003525
#SPJ11
what is the wavelength from a radio station having frequency 107.7 mhz?
The wavelength of the radio wave from the radio station with a frequency of 107.7 MHz is approximately 2.78 meters.
To calculate the wavelength of a radio wave, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)
Where:
c is the speed of light (approximately 3.00 × 10⁸ meters per second)
f is the frequency of the radio wave
Given that the frequency of the radio station is 107.7 MHz, we need to convert it to hertz (Hz) by multiplying it by 10⁶:
f = 107.7 MHz × 10⁶ Hz/MHz = 107.7 × 10⁶ Hz
Now we can calculate the wavelength:
λ = (3.00 × 10⁸ m/s) / (107.7 × 10⁶ Hz)
λ = 2.78 meters
Therefore, the wavelength of the radio wave = 2.78 meters.
Learn more about radio wave here:
https://brainly.com/question/29544736
#SPJ11
The wavelength from a radio station having frequency 107.7 MHz can be found using the formula:
Wavelength = Speed of Light / Frequency
Using the formula Wavelength = Speed of Light / Frequency, the wavelength can be found by substituting the given values.
Speed of light = 3 × 108 m/s
Frequency = 107.7 × 106 Hz (since 1 MHz = 106 Hz)Therefore, the wavelength = (3 × 108 m/s) / (107.7 × 106 Hz)= 2.7816 m
Radio waves have different wavelengths which ranges from about 1 millimeter to 100 kilometers and frequencies ranging from about 300 GHz to 3 kHz respectively. Radio waves with higher frequencies have shorter wavelengths, and radio waves with lower frequencies have longer wavelengths.
The formula to calculate the wavelength of a radio wave is given by the equation; Wavelength = Speed of Light / Frequency.
The speed of light in a vacuum is always constant and has a value of 3 × 108 m/s. The frequency is given as 107.7 MHz. We first convert it to Hz as follows: 1 MHz = 106 Hz
Therefore, 107.7 MHz = 107.7 × 106 Hz
Now we can substitute the values in the formula:
Wavelength = Speed of Light / Frequency= 3 × 108 m/s / 107.7 × 106 Hz= 2.7816 m
Therefore, the wavelength of the radio wave from the station is 2.7816 m.
Learn more about radio waves: https://brainly.com/question/13989450
#SPJ11
Your velocity is given by v(t) = t^2 + 6 in m/sec, with t in seconds. Estimate the distance, s, traveled between t=0 and t=5. Use an overestimate with data every one second
The overestimated distance traveled between t=0 and t=5 is 158 meters.
To estimate the distance traveled, we can use the trapezoidal rule to approximate the area under the curve of the velocity function v(t). The trapezoidal rule divides the interval [0, 5] into subintervals with a width of 1 second and approximates each subinterval as a trapezoid. The formula for the trapezoidal rule is ∫[a,b] f(x) dx ≈ ∑[(i=1 to n)] [f(x_i-1) + f(x_i)] * Δx / 2, where Δx is the width of each subinterval.
Using this formula, we can calculate the overestimated distance traveled:
s ≈ [f(0) + 2f(1) + 2f(2) + 2f(3) + 2f(4) + f(5)] * Δt / 2
≈ [0 + 2(1^2 + 6) + 2(2^2 + 6) + 2(3^2 + 6) + 2(4^2 + 6) + (5^2 + 6)] * 1 / 2
≈ 158 meters.
This provides an overestimate of the distance traveled between t=0 and t=5.
For more questions like Velocity click the link below:
https://brainly.com/question/30559316
#SPJ11
the angle below measures 5.8 radians, and a circle is centered at the angle's vertex.
There is an angle measuring 5.8 radians and a circle centered at the angle's vertex.
What is the measurement of the angle in radians, and what is centered at the vertex of the angle?The statement mentions that there is an angle measuring 5.8 radians, and a circle centered at the angle's vertex.
However, without additional context or specific question,
it is unclear what information or answer is being sought. If you have a specific question or need further clarification, please provide more details so that I can assist you better.
Learn more about angle measuring
brainly.com/question/31186705
#SPJ11
A group of particles is traveling in a magnetic field of unknown magnitude and direction. You observe that a proton moving at 1.50 km/s in the +x-direction experiences a force of 2.06×10−16 N in the +y-direction, and an electron moving at 4.20 km/s in the −z-direction experiences a force of 8.60×10−16 N in the +y-direction.
Part A
What is the magnitude of the magnetic field?
Part B
What is the direction of the magnetic field? (in the xz-plane)
Part C
What is the magnitude of the magnetic force on an electron moving in the −y-direction at 3.50 km/s ?
Part D
What is the direction of this the magnetic force? (in the xz-plane)
part a: The magnitude of the magnetic field is 1.17 × 10−5 T. part b: Therefore, the direction of the magnetic field is in the xz-plane.(explanation below). part c: The magnitude of the magnetic force on an electron moving in the −y-direction at 3.50 km/s is 9.02 × 10−14 N. part d: Therefore, the direction of the magnetic force in the xz-plane is in the +z direction. are the answers
Part A:
The magnetic field is given by the formula:
F= qvBsinθ
where F is the magnetic force, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field and θ is the angle between the velocity of the particle and the magnetic field.
The force on proton moving in the +x direction,
Fp = 2.06×10−16 N and the
velocity, vp = 1.50 km/s = 1.5 × 10^3 m/s
Putting the values in the formula:
Fp= qvpBsinθp
2.06×10−16 = (1.60 × 10−19)(1.50 × 10^3)Bsinθp
where q is the charge of proton which is 1.6 × 10−19 C
The angle θp between the velocity and the magnetic field is 90° since the force is perpendicular to the velocity and the magnetic field.
Sin 90° = 1
Substituting the values, we get
B = 1.17 × 10−5 T
The magnitude of the magnetic field is 1.17 × 10−5 T
Part B:
The direction of the magnetic field can be obtained from the force on the electron moving in the -z direction and the force is given by
Fe = 8.60×10−16 N
and the velocity,
ve = 4.20 km/s = 4.2 × 10^3 m/s
Putting the values in the formula:
Fe= qveBsinθe8.60×10−16 = (1.60 × 10−19)(4.2 × 10^3)Bsinθe
where q is the charge of electron which is 1.6 × 10−19 C
The angle θe between the velocity and the magnetic field is 90° since the force is perpendicular to the velocity and the magnetic field.
Sin 90° = 1
Substituting the values, we get
B = 1.68 × 10−5 T
Since the force is in the +y direction and the velocity is in the -z direction, the magnetic field should be in the +x direction.
Therefore, the direction of the magnetic field is in the xz-plane.
Part C:
The magnitude of the magnetic force on an electron moving in the −y-direction at 3.50 km/s is given by the formula:
F= qvBsinθ
where F is the magnetic force, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field and θ is the angle between the velocity of the particle and the magnetic field.
The velocity of the electron, ve = 3.50 km/s = 3.5 × 10^3 m/s
The angle between the velocity of the particle and the magnetic field is 90° since the force is perpendicular to the velocity and the magnetic field.
θ = 90° = π/2
Substituting the values in the formula:
F= qveBsinθF = (1.60 × 10−19)(3.5 × 10^3)(1.68 × 10−5) × 1F = 9.02 × 10−14 N
The magnitude of the magnetic force on an electron moving in the −y-direction at 3.50 km/s is 9.02 × 10−14 N.
Part D:
The direction of the magnetic force can be obtained from the right-hand rule. The direction of the magnetic force is perpendicular to both the magnetic field and the velocity of the particle.The velocity of the electron is in the -y direction and the magnetic field is in the +x direction. Using the right-hand rule, the direction of the magnetic force is in the +z direction.
Therefore, the direction of the magnetic force in the xz-plane is in the +z direction.
to know more about magnetic force visit:
https://brainly.com/question/10353944
#SPJ11
what must be the sign and magnitude of qq for the resultant electric field at the origin to be 45.0 n/cn/c in the −x−x direction?
To achieve a resultant electric field of 45.0 N/C in the -x direction at the origin, the charge q must have a specific sign and magnitude.
The resultant electric field at a point is determined by the superposition principle, which states that the total electric field is the vector sum of the electric fields produced by individual charges.
To achieve an electric field in the -x direction, the charges contributing to the field must have opposite signs. Thus, q must have a negative sign.
The magnitude of q can be calculated using the equation E = kq/r^2, where E is the desired electric field (45.0 N/C) and r is the distance from the charge to the origin. Solving this equation will provide the magnitude of q required.
To know more about ,superposition principle, click here https://brainly.com/question/31873313
#SPJ11
an 80 kg hunter gets a rope around a 400 kg polar bear. they are stationary and on frictionless level ice, initially 60 m apart. when the hunter pulls the polar bear to him, the polar bear will move: 1) 10 m
2) 30 m
Hence, the system does not move forward. Therefore, the polar bear does not move when the hunter pulls the polar bear to him. Therefore, the correct option is 1) 10 m.
In the given problem, an 80 kg hunter gets a rope around a 400 kg polar bear. They are stationary and on frictionless level ice, initially 60 m apart. The question asks us to determine the distance moved by the polar bear when the hunter pulls the polar bear to him.
Let the distance moved by the polar bear be x meters. Since there are no external forces other than the force exerted by the hunter on the bear, the total momentum of the system will remain conserved.
Using the law of conservation of momentum
,momentum before = momentum after
Initially, the momentum of the system is:
m1u1 + m2u2 = (m1 + m2) v
Where,m1 = mass of hunter = 80 kg u1 = initial velocity of hunter = 0 m/sm2 = mass of polar bear = 400 kg u2 = initial velocity of polar bear = 0 m/s, v = final velocity of the system = speed with which the hunter and the polar bear move together.
After the hunter pulls the polar bear, the system attains a velocity v.
The momentum of the system becomes (m1 + m2) v.
Substituting the values in the equation, we get:
80 × 0 + 400 × 0 = (80 + 400) v=> 0 = 480v=> v = 0 m/s
Hence, the system does not move forward. Therefore, the polar bear does not move when the hunter pulls the polar bear to him. Therefore, the correct option is 1) 10 m.
Note: In the question, it is mentioned that they are on frictionless level ice. So, there is no frictional force acting on the system.
to know more about momentum visit:
https://brainly.com/question/2193212
#SPJ11
In which one of the following cases is the displacement of the object directly proportional to the elapsed time? a ball at rest is given a constant acceleration O a rocket fired from the earth's surface experiences an increasing acceleration a ball rolls with constant velocity a ball rolling with velocity vo is given a constant acceleration a bead falling through oil experiences a decreasing acceleration
The case in which the displacement of the object is directly proportional to the elapsed time is when a ball rolls with constant velocity.
When the displacement of an object is directly proportional to the elapsed time, it means that the object is moving with a constant velocity. In this scenario, the object covers equal displacements in equal intervals of time.
1. A ball at rest is given a constant acceleration:
In this case, the ball starts from rest and experiences a constant acceleration. As a result, the velocity of the ball increases with time, and the displacement is not directly proportional to the elapsed time. The object is accelerating.
2. A rocket fired from the Earth's surface experiences an increasing acceleration:
Similar to the first case, the rocket is experiencing an increasing acceleration, which means its velocity is increasing over time. The displacement is not directly proportional to the elapsed time. The object is accelerating.
3. A ball rolls with constant velocity:
In this case, the ball is moving with a constant velocity. Since the velocity is constant, the displacement of the ball will be directly proportional to the elapsed time. The object is moving with constant velocity.
4. A ball rolling with velocity v₀ is given a constant acceleration:
When the ball is given a constant acceleration, its velocity will change over time. The displacement will not be directly proportional to the elapsed time. The object is accelerating.
5. A bead falling through oil experiences a decreasing acceleration:
In this case, the bead is experiencing a decreasing acceleration, which means its velocity is decreasing over time. The displacement is not directly proportional to the elapsed time. The object is decelerating.
Therefore, the case where the displacement of the object is directly proportional to the elapsed time is when a ball rolls with constant velocity.
To know more about displacement refer here:
https://brainly.com/question/29769926#
#SPJ11
design an electric generator that gives an rms voltage of 120 volts, i.e., draw a diagram and specify values for all of the components.
Diagram: The diagram of the electric generator is shown below. Values of Components: Stator: 8 poles Rotor Speed: 1800 RPM Magnets: Neodymium Magnets Coil Winding: 20 gauge wire, 150 turns Capacitor: 10uFDiode Bridge: 200 volts Load: 3 ohms
To design an electric generator that gives an RMS voltage of 120 volts, a number of components must be specified. Below are the steps and the values for the components in order to achieve this objective.
1. Choose the Stator: The stator is the stationary part of a motor, and it is responsible for producing the magnetic field that the rotor will interact with.
The stator's construction determines the number of poles it has. The number of poles in a stator is directly proportional to its power rating. A high-power generator will have more poles than a low-power generator. A stator with eight poles is chosen for this project.
2. Determine the Rotor : The rotor is the rotating part of a motor. It is responsible for interacting with the magnetic field generated by the stator.
To generate power, the rotor must be able to rotate at a certain speed, which is determined by the frequency of the electrical current supplied to it. For the generator to generate 60 hertz of electrical current, the rotor must rotate at a speed of 1800 RPM.
3. Choose the Magnets: The magnetic fields that the stator generates must interact with something. That is why permanent magnets are used to create the rotor's magnetic field. Neodymium magnets are chosen as the type of permanent magnet for this generator.
4. Choose the Coil : Winding To generate electrical current, a coil of wire is required. The coil is wrapped around the rotor and rotates along with it. The stator, on the other hand, has a stationary coil of wire wrapped around it.
To generate the target voltage of 120 volts, a coil of 20-gauge wire with 150 turns is used.
5. Choose the Capacitor: To generate a steady voltage output, a capacitor is used. The capacitor is placed in parallel with the output of the generator. To generate an RMS voltage of 120 volts, a 10uF capacitor is used.6. Choose the Diode Bridge A diode bridge is required to convert the AC voltage generated by the generator to DC voltage that can be used to power devices.
The diode bridge is placed in series with the output of the generator. To generate an RMS voltage of 120 volts, a diode bridge with a voltage rating of 200 volts is used.
7. Choose the Load: To test the generator, a load is needed. A resistor is used to simulate the load. To generate an RMS voltage of 120 volts, a 3 ohm resistor is used.
to know more about electric generator visit:
https://brainly.com/question/12296668
#SPJ11
A surfer floating beyond the breakers notes 17 waves per minute passing her position. If the wavelength of these waves is 38 , what is their speed? A surfer floating beyond the breakers notes 17 waves per minute passing her position. If the wavelength of these waves is 38 , what is their speed?
To calculate the speed of the waves, we can use the formula: Speed = Frequency × Wavelength
Given that the surfer notes 17 waves per minute and the wavelength is 38 units, we can substitute these values into the formula: Speed = 17 waves/minute × 38 units/wave. To determine the unit of speed, we need to know the unit of the wavelength. Let's assume the wavelength is given in meters. In that case, the unit of speed will be meters per minute. Calculating the speed: Speed = 17 waves/minute × 38 units/wave = 646 units/minute. Therefore, the speed of the waves is 646 meters per minute.
To learn more about Wavelength, https://brainly.com/question/21140978
#SPJ11
please help
Twenty one cancer patients volunteer for a clinical trial. Five of the patients will receive a placebo and Sixteen will receive the trial drug. In how many different ways can the researchers select 16
Twenty one cancer patients volunteer for a clinical trial. Five of the patients will receive a placebo and Sixteen will receive the trial drug. The researchers can select 16 patients out of 21 in 25,029 different ways.
To determine the number of different ways the researchers can select 16 out of 21 patients, we can use the concept of combinations. Since the order of selection does not matter in this case, we can use the formula for combinations, given by:
C(n, r) = n! / (r! * (n - r)!)
where n is the total number of items and r is the number of items to be selected.
In this case, the researchers need to select 16 patients out of 21, so we have:
C(21, 16) = 21! / (16! * (21 - 16)!)
Simplifying the expression:
C(21, 16) = (21 * 20 * 19 * 18 * 17 * 16!) / (16! * 5 * 4 * 3 * 2 * 1)
The 16! terms in the numerator and denominator cancel out:
C(21, 16) = (21 * 20 * 19 * 18 * 17) / (5 * 4 * 3 * 2 * 1)
Evaluating the expression:
C(21, 16) = 3,003,480 / 120
C(21, 16) = 25,029
For more such information on: clinical trial
https://brainly.com/question/30784672
#SPJ8
(Figure 1)A chandelier with mass m is attached to the ceiling of a large concert hall by two cables. Because the ceiling is covered with intricate architectural decorations (not indicated in the figure, which uses a humbler depiction), the workers who hung the chandelier couldn't attach the cables to the ceiling directly above the chandelier. Instead, they attached the cables to the ceiling near the walls. Cable 1 has tension T1 and makes an angle of θ1 with the ceiling. Cable 2 has tension T2 and makes an angle of θ2 with the ceiling.
Question
Find an expression for T1, the tension in cable 1, that does not depend on T2. Express your answer in terms of some or all of the variables m, θ1, and θ2, as well as the magnitude of the acceleration due to gravity g. You must use parentheses around θ1 and θ2, when they are used as arguments to any trigonometric functions in your answer.
To find an expression for T1, the tension in cable 1, we need to consider the forces acting on the chandelier. The chandelier is in equilibrium, so the net force acting on it is zero.
Let's analyze the forces involved: The weight of the chandelier acts vertically downward and is given by the formula: F_weight = m * g, where m is the mass of the chandelier and g is the acceleration due to gravity. The tension in cable 1 acts at an angle θ1 with the ceiling. Since the chandelier is in equilibrium, the vertical component of the tension in cable 1 must balance the weight of the chandelier. Therefore, we can write the equation: T1 * cos(θ1) = m * g. Solving for T1, we get: T1 = (m * g) / cos(θ1). Hence, the expression for T1, the tension in cable 1, that does not depend on T2 is: T1 = (m * g) / cos(θ1).
To learn more about forces, https://brainly.com/question/31644793
#SPJ11
A point charge q1 is held stationary at the origin. A second charge q2 is placed at point a, and the electric potential energy of the pair of charges is +5.4×10−8 J. When the second charge is moved to point b, the electric force on the charge does −1.9×10−8 J of work. What is the electric potential energy of the pair of charges when the second charge is at point b ? 23.3 Energy of the Nucleus. How much work is needed to assemble an atomic nucleus containing three protons (such as Li) if we model it as an equilateral triangle of side 2.00×10−15 m with a proton at each vertex? Assume the protons started from very far away.
When the second charge is at point b, the electric potential energy of the pair of charges is 3.5 × 10⁻⁸ J.
Electric potential energy can be defined as the amount of work that is needed to be done by external forces in order to bring the system together or separate the charges from each other. The work done is negative when the charges move towards each other while it is positive when they move away from each other.
Given that the electric force on the charge does -1.9 × 10⁻⁸ J of work, we can deduce that the electric potential energy of the pair of charges is increasing. The electric potential energy of the pair of charges when the second charge is at point b can be calculated by using the following formula, ΔU = -W where ΔU is the change in potential energy and W is the work done by the system. Hence, ΔU = -W= 1.9 × 10⁻⁸ J.
Therefore, the electric potential energy of the pair of charges when the second charge is at point b is 3.5 × 10⁻⁸ J.
Learn more about work here:
https://brainly.com/question/31746168
#SPJ11
Find the rest energy, in terajoules, of a 15.3 g piece of chocolate. 1 TJ is equal to 102 J. rest energy TJ
The rest energy of a 15.3 g piece of chocolate is approximately 1.377 terajoules.
The rest energy of an object can be calculated using Einstein's mass-energy equivalence principle, which states that the rest energy (E) of an object is equal to its mass (m) multiplied by the speed of light squared (c^2).
The speed of light (c) is approximately 3.0 × 10^8 meters per second.
Given that the mass of the chocolate is 15.3 g, we need to convert it to kilograms before we can calculate the rest energy.
1 g = 0.001 kg
Therefore, the mass of the chocolate is 15.3 g × 0.001 kg/g = 0.0153 kg.
Now we can calculate the rest energy:
E = m * c^2
E = 0.0153 kg * (3.0 × 10^8 m/s)^2
E = 0.0153 kg * (9.0 × 10^16 m^2/s^2)
E = 1.377 × 10^15 J
To convert the rest energy to terajoules, we divide by the conversion factor:
1 TJ = 10^12 J
Rest energy (in TJ) = 1.377 × 10^15 J / (10^12 J/TJ)
Rest energy (in TJ) ≈ 1.377 TJ
Therefore, the rest energy of a 15.3 g piece of chocolate is approximately 1.377 terajoules.
To learn more about rest energy click here
https://brainly.com/question/31796191
#SPJ11
A 24.0 kg child plays on a swing having support ropes that are 1.80 m long. A friend pulls her back until the ropes are 45.0 degree from the vertical and releases her from rest. What is the potential energy for the child as she is released, compared with the potential energy at the bottom of the swing? How fast will she be moving at the bottom of the swing? How much work does the tension in the ropes do as the child swings from the initial position to the bottom?
The potential energy for the child as she is released is 82.1 J, she will be moving at a speed of 4.01 m/s at the bottom of the swing, and the work done by the tension in the ropes as the child swings from the initial position to the bottom is 193 J.
A 24.0 kg child is playing on a swing having support ropes that are 1.80 m long. A friend pulls her back until the ropes are 45.0 degree from the vertical and releases her from rest. The potential energy for the child as she is released, compared with the potential energy at the bottom of the swing is given by;`U = mgh``U = 24.0 kg × 9.81 m/s^2 × (1.8 m - 1.8m cos 45°)`On solving this equation, we get `U = 82.1 J`
The potential energy at the bottom of the swing is equal to kinetic energy at the top of the swing since there is no external work done on the system. Therefore, the kinetic energy of the child when she is at the bottom of the swing is equal to the potential energy of the child when she is released.
Kinetic energy at the bottom of the swing is given by;`K = (1/2)mv^2``82.1 J = (1/2) × 24.0 kg × v^2``v = 4.01 m/s`The work done by the tension in the ropes as the child swings from the initial position to the bottom is given by;`W = ∆K = Kf - Ki``W = (1/2)mvf^2 - (1/2)mvi^2``W = (1/2) × 24.0 kg × (4.01 m/s)^2 - (1/2) × 24.0 kg × 0 m/s``W = 193 J`
Therefore, the potential energy for the child as she is released is 82.1 J, she will be moving at a speed of 4.01 m/s at the bottom of the swing, and the work done by the tension in the ropes as the child swings from the initial position to the bottom is 193 J.
To learn more about potential visit;
https://brainly.com/question/28300184
#SPJ11
Once a carousel is in motion, the constant movement of the carousel horse around the
center of the circle can BEST be described as:
A) Acceleration; Change in speed
B) Velocity; Speed plus direction
C) Acceleration; Chang in velocity
D) Speed; Distance traveled over time
The constant movement of the carousel horse around the center of the circle can BEST be described as velocity; speed plus direction.
The correct answer to the given question is option B.
Velocity is the vector that describes how fast and in what direction something moves. It has a magnitude (the speed of the movement) and a direction (the direction of the movement). The motion of the carousel horse is circular and, as a result, has a constant speed (distance travelled over time) and a direction (tangential to the circumference of the circle). Therefore, it can be described as velocity.
Acceleration is a measure of how fast the velocity is changing, and in the case of the carousel, the horse is not changing direction or speed, so it is not experiencing any acceleration. Finally, speed and distance traveled over time are related but do not describe the direction of the motion.
Since the motion of the carousel horse is circular, speed and distance traveled over time alone do not provide a complete description. Thus, the best answer is velocity; speed plus direction.
For more such questions on speed, click on:
https://brainly.com/question/13943409
#SPJ8
What must the separation be between a 6.6 kg particle and a 7.4 kg particle for their gravitational attraction to have a magnitude of
4.2 × 10-12 N? to 4 sig figs
The separation between a 6.6 kg particle and a 7.4 kg particle for their gravitational attraction to have a magnitude of 4.2 × 10-12 N is 14.3 m.
Given, Mass of particle 1 = 6.6 kgMass of particle 2 = 7.4 kg
Gravitational force between particle 1 and particle 2 = 4.2 × 10-12 N
We know that the formula for calculating the gravitational force between two objects is: where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers of mass.
Let r be the separation between the two particles to have a magnitude of 4.2 × 10-12 N.
Substituting the values in the above formula we get,r = (G m1 m2)/FWhere,G = 6.674 × 10^-11 N m² /kg²m1 = 6.6 kgm2 = 7.4 kgF = 4.2 × 10-12 N
Putting these values in the above formula,r = (6.674 × 10^-11 × 6.6 × 7.4)/(4.2 × 10-12)r = 1.43 × 10^1 m or 14.3 m
Therefore, the separation between a 6.6 kg particle and a 7.4 kg particle for their gravitational attraction to have a magnitude of 4.2 × 10-12 N is 14.3 m.
Learn more about gravitational force
brainly.com/question/32609171
#SPJ11
if you have 1000 lambda baryons traveling at beta =0.6 with
proper lifetime ct=8cm, whats the average distance before they
decay?
The average distance traveled by 1000 lambda baryons before they decay is approximately 48.0 meters.
The proper lifetime of a particle, denoted as ct, is the time it takes for the particle to decay when at rest in its own frame of reference. The quantity β represents the velocity of the particles relative to the speed of light, where β = v/c.
To calculate the average distance traveled before decay, we can use the formula:
Average distance = βct
Given that β = 0.6 and ct = 8 cm, we need to convert ct to meters for consistency. 1 cm is equal to 0.01 meters.
Substituting the values into the formula:
Average distance = 0.6 * 8 cm = 0.6 * 8 * 0.01 m = 0.048 m
Since we have 1000 lambda baryons, we multiply the average distance by 1000 to account for all the particles:
Average distance for 1000 lambda baryons = 0.048 m * 1000 = 48 m
Therefore, the average distance traveled by 1000 lambda baryons before they decay is approximately 48 meters.
To know more about distance, refer here:
https://brainly.com/question/30145106#
#SPJ11
The helium-neon lasers most commonly used in student physics laboratories have average power outputs of 0.250 mW.
(a) If such a laser beam is projected onto a circular spot 1.72 mm in diameter, what is its intensity?
(b) Find the peak electric field strength.
(c) Find the peak magnetic field strength.
a) The intensity of the beam is 108.2 W/m². b) The peak electric field strength is 1.61 x 10⁵ V/m. c) The peak magnetic field strength is 5.49 x 10⁻³ T.
(a) The intensity of a laser beam is given as the power per unit area. So, the formula for finding the intensity of a laser beam is: I = P/A where P is the power of the beam, and A is the area it illuminates. We are given that the power output of the laser beam is 0.250 mW, and the diameter of the circular spot it illuminates is 1.72 mm,
which means the area it illuminates is πr² = π(1.72/2)² = 2.31 mm²
= 2.31 x 10⁻⁶ m².
So the intensity is given by:
I = P/A
0.250 x 10⁻³/2.31 x 10⁻⁶
108.2 W/m².
(b) The electric field strength of a laser beam is given by the formula: E = √(2I/ε₀c) where I is the intensity of the beam, ε₀ is the permittivity of free space, and c is the speed of light. So we can substitute the values given to find the electric field strength:
E = √(2(108.2)/(8.85 x 10⁻¹² x 3 x 10⁸))
= 1.61 x 10⁵ V/m.
(c) The magnetic field strength of a laser beam is given by the formula: B = √(2I/μ₀c²) where I is the intensity of the beam, μ₀ is the permeability of free space, and c is the speed of light. So we can substitute the values given to find the magnetic field strength:
B = √(2(108.2)/(4π x 10⁻⁷ x 3 x 10⁸)²)
= 5.49 x 10⁻³ T.
Learn more about intensity here:
https://brainly.com/question/30756804
#SPJ11
Item 11 Part A Estimate the total mass of the Earth's atmosphere, using the known value of atmospheric pressure at sea level. Express your answer to three significant figures and include the appropriate units. ? m = Value Units Submit Request Answer
The estimated total mass of the Earth's atmosphere using the known value of atmospheric pressure at sea level is about 5.14 × 10¹⁸ kg.
The total mass of the Earth's atmosphere can be estimated using the known value of atmospheric pressure at sea level. The appropriate units of the answer are kilograms (kg).
Here's how to estimate the total mass of Earth's atmosphere:We will begin with the formula for atmospheric pressure, P = F/A where P is the pressure, F is the force, and A is the area. This formula states that the pressure exerted by the atmosphere is the force of the atmosphere divided by its area. Here, we will use the known value of atmospheric pressure at sea level which is 101,325 Pa. The force of the atmosphere can be calculated using the following formula: F = ma, where F is force, m is mass, and a is acceleration.
Since the atmosphere is at rest, the acceleration is 0, so we can write the force equation as F = mg, where g is the acceleration due to gravity which is 9.81 m/s² (meters per second squared).Substituting the value of force, F = mg, in the formula for pressure, P = F/A, we get:mg/A = P.
Solving for mass (m), we have:mass = P × A/g, where A is the area of the Earth's surface. The area of Earth's surface is 5.1 × 10¹⁴ m². Substituting the given values into the above formula:mass = (101,325 Pa) × (5.1 × 10¹⁴ m²)/(9.81 m/s²)≈ 5.14 × 10¹⁸ kg (to three significant figures)
Therefore, the estimated total mass of the Earth's atmosphere using the known value of atmospheric pressure at sea level is about 5.14 × 10¹⁸ kg.
To learn more about mass visit;
https://brainly.com/question/11954533
#SPJ11
.A flywheel with a radius of 0.300m starts from rest and accelerates with a constant angular acceleration of 0.400rad/s2 .
A) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim at the start. (Answers are 0.21,0,0.21 m/s^2)
B) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim after it has turned through 60.0?
C) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim after it has turned through 120?.
The magnitudes of tangential acceleration, radial acceleration, and resultant acceleration can be computed for different angular positions of a point on the rim of the flywheel.
How can the magnitudes of tangential, radial, and resultant acceleration be calculated for different angular positions of a point on the flywheel's rim?A) At the start (0°), the magnitude of the tangential acceleration is 0.21 m/s², the radial acceleration is 0 m/s², and the resultant acceleration is 0.21 m/s².
B) After turning through 60°, the magnitude of the tangential acceleration is 0.21 m/s², the radial acceleration is 0.12 m/s², and the resultant acceleration is 0.24 m/s².
C) After turning through 120°, the magnitude of the tangential acceleration is 0.21 m/s², the radial acceleration is -0.21 m/s², and the resultant acceleration is 0 m/s².
Learn more about Tangential acceleration
brainly.com/question/15743294
#SPJ11
what is the largest wavelength λmaxλmaxlambda_max in the balmer series
The largest wavelength in the Balmer series is 656.3 nanometers, which corresponds to the transition from the n=3 energy level to the n=2 energy level.
The Balmer series is a sequence of six wavelengths emitted by the hydrogen atom as a result of changes in the electron's energy levels. When an electron in the hydrogen atom drops from a higher energy level to the n=2 level, a photon is emitted whose wavelength lies in the visible part of the electromagnetic spectrum. The largest wavelength in the Balmer series is 656.3 nanometers, which corresponds to the transition from the n=3 energy level to the n=2 energy level.
The Balmer series is the visible portion of the hydrogen atom's emission spectrum. When an electron in the hydrogen atom drops from a higher energy level to the n=2 level, a photon is emitted whose wavelength lies in the visible part of the electromagnetic spectrum. The Balmer series is a sequence of six wavelengths emitted by the hydrogen atom as a result of changes in the electron's energy levels. The largest wavelength in the Balmer series is 656.3 nanometers, which corresponds to the transition from the n=3 energy level to the n=2 energy level.
Balmer series is only one of several series that hydrogen can emit. The other series include the Lyman series (in the ultraviolet), the Paschen series (in the infrared), and the Brackett series (in the far infrared). The Rydberg formula can be used to calculate the wavelengths of all the series of hydrogen emission spectrums.
To know more about wavelength visit:
https://brainly.com/question/31143857
#SPJ11
find the exact length of the curve. x = et − 9t, y = 12et/2, 0 ≤ t ≤ 2
The exact length of the curve is difficult to find analytically, but we can approximate it using numerical methods. The length is approximately 12.803 units.
To find the length of the given curve, we need to use the formula for arc length, which is given by:
L = ∫a^b sqrt[1 + (dy/dx)²] dx
where a and b are the limits of the parameter t, and dy/dx is the derivative of y with respect to x.
We are given the following parametric equations:
x = et − 9ty = 12et/2
We need to find the length of the curve defined by these equations for 0 ≤ t ≤ 2.
Using the formula for arc length, we have:
L = ∫0^2 sqrt[1 + (dy/dx)²] dx
First, let's find dy/dx:dx/dt = eⁿ - 9dy/dt = 6eⁿ/2
Thus,dy/dx = (dy/dt) / (dx/dt)= 6eⁿ/2 / (eⁿ - 9) = 6 / (2eⁿ/2 - 9/eⁿ)Now, we can substitute this into the formula for arc length to get:
L = ∫0^2 sqrt[1 + (dy/dx)²] dx= ∫0^2 sqrt[1 + (6 / (2eⁿ/2 - 9/eⁿ))²] dx
This integral is difficult to evaluate analytically, so we will use numerical methods to approximate the value of L.
We can use the trapezoidal rule with n = 4 subintervals to get:
L ≈ Δx/2 [f(x₀) + 2f(x₁) + 2f(x₂) + 2f(x₃) + f(x₄)]whereΔx = (2 - 0) / 4 = 0.5x₀ = 0, x₁ = 0.5, x₂ = 1, x₃ = 1.5, x₄ = 2andf(x) = sqrt[1 + (6 / (2eⁿ/2 - 9/eⁿ))²]
Plugging in these values and simplifying, we get:
L ≈ 12.803
The exact length of the curve is difficult to find analytically, but we can approximate it using numerical methods. The length is approximately 12.803 units.
To know more about curve, visit:
https://brainly.com/question/32496411
#SPJ11
explain why a projectile release add an angle of 60° and 30° both
travel the same range
A projectile launched at angles of 60° and 30° will travel the same range due to the symmetrical nature of projectile motion. The horizontal and vertical components of motion are independent of each other, and the range depends only on the initial speed and the launch angle.
When a projectile is launched at an angle, it follows a curved trajectory due to the combination of its horizontal and vertical motions. The horizontal component of the projectile's velocity remains constant throughout its flight, while the vertical component is affected by gravity.
For a given initial speed, the range of a projectile (the horizontal distance it travels) is maximized when the launch angle is 45°. This is because at 45°, the initial speed is divided equally between the horizontal and vertical components, resulting in the maximum range.
When the launch angles are 60° and 30°, the components of the initial velocity are divided differently, but the total initial speed remains the same. The component of the initial velocity in the horizontal direction is given by V₀ * cos(θ), and in the vertical direction, it is V₀ * sin(θ), where V₀ is the initial speed and θ is the launch angle.
If we consider two projectiles with the same initial speed, launched at 60° and 30°, the vertical components of their initial velocities will differ, but their horizontal components will be the same. As a result, the time of flight and the vertical displacement will differ, but the horizontal distance traveled (range) will be the same for both projectiles.
The range of a projectile launched at angles of 60° and 30° is the same because the horizontal component of the initial velocity, which determines the range, remains constant. The vertical component of the initial velocity affects the time of flight and vertical displacement but does not impact the range. This can be understood by recognizing that the horizontal and vertical components of motion are independent of each other in projectile motion. The symmetrical nature of the range allows for different launch angles to produce the same horizontal distance traveled as long as the initial speed remains constant.
To know more about projectile motion ,visit:
https://brainly.com/question/10680035
#SPJ11
how far from the wall must you move to find the first quiet spot? assume a sound speed of 340 m/s .
Therefore, to find the first quiet spot, you need to move 0.17 meters away from the wall.
To find the first quiet spot, the distance from the wall needs to be calculated, assuming a sound speed of 340 m/s. The speed of sound in air is about 340 meters per second at standard temperature and pressure, making it an important factor in determining the distance from the wall.
The formula for calculating distance is as follows:
Distance = (n + 0.5) λn
Where, n = 1, 2, 3,…and λn = wavelength of the sound
The first quiet spot is where destructive interference occurs. It is also where the sound waves reflected from the wall are out of phase with the sound waves that are directly from the source. The distance to the first quiet spot from the wall is equal to one-half the wavelength of the sound.
Thus, it can be calculated as follows:
λn = v/f
Where v = speed of sound and f = frequency of the sound.
A quiet spot can be found by calculating the wavelength of the sound and then dividing it by 2.
So, we get;
λ = v/f
= 340 m/s / 1 kHz
= 0.34 m
One-half the wavelength is: (1/2)λ = 0.17 m
The first quiet spot is 0.17 meters from the wall.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ11
Suppose an x-ray tube produces x-rays with a range of wavelengths, the shortest of which is 0.0093 nm. (lemda= 0.0093 nm)
What is the accelerating voltage of the x-ray tube in kilovolts?
The accelerating voltage of the x-ray tube in kilovolts is 1335 kV.
An x-ray tube produces x-rays with a range of wavelengths, the shortest of which is 0.0093 nm. To determine the accelerating voltage of the x-ray tube in kilovolts, we can use the following formula:
Energy of a photon = Planck's constant × frequency of the photon
Ephoton = h * f
Where Ephoton = hc / λ and
h = Planck's constant = 6.626 x 10⁻³⁴ J s,
c = speed of light = 3 x 10⁸ m/s,
λ = 0.0093 nm.
Therefore, we can calculate f as follows:f = c / λ = (3 x 10⁸) / (0.0093 x 10⁻⁹) Hz = 3.2258 x 10¹⁷ Hz
Then, we can find the energy of a photon:Ephoton = h * f = 6.626 x 10⁻³⁴ J s × 3.2258 x 10¹⁷ Hz = 2.14 x 10¹⁶ J
The energy of a photon is also related to the accelerating voltage, V as follows: Ephoton = eV where e = the elementary charge = 1.602 x 10⁻¹⁹ C
Therefore, we can find the accelerating voltage, V
:V = Ephoton / e = 2.14 x 10⁻¹⁶ J / 1.602 x 10⁻¹⁹ C = 1335 kV.
Therefore, the accelerating voltage of the x-ray tube in kilovolts is 1335 kV.
Thus, the accelerating voltage of the x-ray tube in kilovolts is 1335 kV.
To know more about Planck's constant visit:
brainly.com/question/30763530
#SPJ11
The electric field strength 5.0 cm from a very long charged wire is 3700 n/c. What is the electric field strength 10.0 cm from the wire?
The electric field strength 10.0 cm from the wire is 1032.25 N/C. It is given that the electric field strength at a distance of 5.0 cm from a long charged wire is 3700 N/C.
Since the charged wire is very long, its electric field is radial, and the magnitude of the electric field varies with distance r from the wire according to the equation:
E = λ/(2πεor), where λ is the linear charge density (charge per unit length), εo is the permittivity of free space (8.85 × 10−12 C2/Nm2), and 2πr is the circumference of a circle of radius r centered on the wire.
To find the electric field strength at a distance of 10.0 cm, substitute r = 10.0 cm = 0.1 m into the formula and solve for E:
E = λ/(2πεor)
E = (3700 N/C)(2π)(8.85 × 10−12 C2/Nm2)/(2 × 0.1 m)
E = 1032.25 N/C
Therefore, the electric field strength 10.0 cm from the wire is 1032.25 N/C.
The electric field strength 5.0 cm from a very long charged wire is 3700 N/C.
The electric field strength varies with distance r from the wire according to the equation: E = λ/(2πεor).
To find the electric field strength at a distance of 10.0 cm, substitute r = 10.0 cm = 0.1 m into the formula and solve for E:
E = λ/(2πεor)
E = (3700 N/C)(2π)(8.85 × 10−12 C2/Nm2)/(2 × 0.1 m)
E = 1032.25 N/C
Therefore, the electric field strength 10.0 cm from the wire is 1032.25 N/C.
Learn more about electric field here:
https://brainly.com/question/17093047
#SPJ11
One carat is equivalent to a mass of 0.200 g. Use the fact that 1 kg (1000 g) has a weight of 2.205 lb under certain conditions, and determine the weight of a 1876 carat diamond in pounds (lb). Number
Diamonds are evaluated based on their carat weight. The weight of 1876 carat diamond in pounds will be approximately 0.826 pounds If 1 kg (1000 g) has a weight of 2.205 lb
Carat weight, on the other hand, refers to the mass of a diamond. A carat is the unit of weight used to weigh a diamond. Carat weight is a significant consideration when selecting a diamond. One carat is equivalent to a mass of 0.200 g.
Therefore, 1876 carats would weigh:1876 carats × 0.200 g/carats = 375.2 gNow we need to convert the weight from grams to pounds. 1 kg (1000 g) has a weight of 2.205 lb under certain conditions. Therefore,375.2 g × (1 kg/1000 g) × (2.205 lb/1 kg) = 0.826 lb A 1876-carat diamond would weigh approximately 0.826 pounds (lb).It is crucial to realize that carat weight is not the same as size.
Carat weight merely refers to the mass of a diamond, while size refers to the dimensions of the diamond when viewed from above. A 1-carat diamond, for example, may appear large or tiny depending on how it is cut. As a result, carat weight should not be the sole factor considered when selecting a diamond.
Know more about Carat here:
https://brainly.com/question/30675304
#SPJ11
the thrust on the 4-mg rocket sled is shown in the graph. determine the sleds maximum velocity and the distance the sled travels when t = 35 s. neglect friction.
The distance traveled (s) is given by:s = ut + 0.5at²... equation (2)where s is the distance traveled by the sled, u is the initial velocity of the sled, a is the acceleration of the sled, and t is the time. Substituting the given values, we have:s = 0 × 35 + 0.5 × 4 × 9.8 × 35²= 26635 mThe sled traveled a distance of 26635 m when t=35s.
The given graph shows the thrust on the 4-mg rocket sled.How to determine the sled's maximum velocity and the distance the sled travels when t=35s (neglect friction)?Given,Mass of rocket sled (m) = 4 mg,Where g is the acceleration due to gravity. Thrust (F) = 160 N.Let v be the velocity of the sled at time t.The force acting on the sled is given by F = ma, where m is the mass of the sled and a is the acceleration of the sled.v = u + atThe velocity of the sled is equal to the initial velocity plus the product of the acceleration and the time. Neglecting friction, we can say that there is no external force acting on the sled other than the thrust force. Thus, F=ma becomes F=4mg, so acceleration is a=4g.The velocity of the sled at time t can be determined byv = u + at... equation (1)where v is the final velocity of the sled, u is the initial velocity of the sled, a is the acceleration of the sled, and t is the time. By integrating this equation, we can determine the distance traveled by the sled.The initial velocity u is equal to zero since the sled is at rest initially.Substituting the given values in the above equation (1), we havev = 0 + 4g t = 4 × 9.8 × 35= 1372 m/sThe sled's maximum velocity is 1372 m/s.The distance traveled by the sled when t = 35 s is determined using the following equation for the distance traveled in terms of velocity and time.The distance traveled (s) is given by:s = ut + 0.5at²... equation (2)where s is the distance traveled by the sled, u is the initial velocity of the sled, a is the acceleration of the sled, and t is the time. Substituting the given values, we have:s = 0 × 35 + 0.5 × 4 × 9.8 × 35²= 26635 mThe sled traveled a distance of 26635 m when t=35s.
To know more about velocity visit :
brainly.com/question/30559316
#SPJ11
Throughout the problem, take the speed of sound in air to be 343 m/s Part A Consider a pipe of length 80.0 cm open at both ends. What is the lowest frequency f of the sound wave produced when you blow into the pipe? Express your answer in hertz. Part B A hole now drilled through the side of the pipe and air is blown again into the pipe through the same opening. The fundamental frequency of the sound wave generated in the pipe is now a) the same as before. b) lower than before c)higher than before d)Constants Part C If you take the original pipe in Part A and drill a hole at a position half the length of the pipe, what is the fundamental frequency f' of the sound that can be produced in the pipe? Express your answer in hertz. Part D What frequencies, in terms of the fundamental frequency of the original pipe in Part A, can you create when blowing air into the pipe that has a hole halfway down its length? Part E What length of open-closed pipe would you need to achieve the same fundamental frequency f as the open-open pipe discussed in Part A? Part F What is the frequency f" of the first possible harmonic after the fundamental frequency in the open-closed pipe described in Part E? Express your answer in hertz.
The frequency f" of the first possible harmonic after the fundamental frequency in the open-closed pipe described in Part E is 180.42 Hz
Part A
The lowest frequency f of the sound wave produced when you blow into the pipe can be found using the formula below:
f = (nv)/(2L)
Here, v = the speed of sound in air
= 343 m/sn
= 1 (since it's the fundamental frequency) and
L = length of the pipe
= 80.0 cm
= 0.8 m
Therefore, the frequency f of the sound wave produced is:
f = (1 × 343)/(2 × 0.8)
= 214.38 Hz
Part B
If a hole is now drilled through the side of the pipe and air is blown again into the pipe through the same opening, the fundamental frequency of the sound wave generated in the pipe will be c) higher than before.
Part C
If a hole is drilled at a position half the length of the pipe, the fundamental frequency f' of the sound that can be produced in the pipe can be found using the formula below:
f' = (2nv)/(2L)
= (nv)/L
Here, v = the speed of sound in air
= 343 m/sn
= 1 (since it's the fundamental frequency)
L = length of the pipe
= 80.0 cm
= 0.8 m
Therefore, the fundamental frequency f' of the sound that can be produced in the pipe is:
f' = (1 × 343)/0.8
= 428.75 Hz
Part D
When blowing air into the pipe that has a hole halfway down its length, frequencies in terms of the fundamental frequency of the original pipe in Part A that can be created are the odd harmonics only. These frequencies are given by:
f1 = (2n - 1)f/f'
where n = 1, 2, 3, ...
Part E
To achieve the same fundamental frequency f as the open-open pipe discussed in Part A, we need to use an open-closed pipe with a length of L = 2L1.
Here, L1 is the length of the open-open pipe from Part A, which is
L1 = 80.0 cm
= 0.8 m.
Therefore, the length of the open-closed pipe that we need to achieve the same fundamental frequency is
L = 2(0.8)
= 1.6 m.
Part F
The frequency f" of the first possible harmonic after the fundamental frequency in the open-closed pipe described in Part E can be found using the formula below:
f" = (3nv)/(4L)
Here, v = the speed of sound in air = 343 m/sn
= 2 (since it's the first harmonic)
f" = (3 × 343)/(4 × 1.6)
= 180.42 Hz
This question is asking about open-open, open-closed pipes and harmonics. For an open-open pipe, the lowest frequency f of the sound wave produced when you blow into the pipe can be calculated using the formula f = (nv)/(2L). On the other hand, to find the frequency f' of the sound that can be produced in a pipe with a hole drilled at a position half the length of the pipe, we can use the formula f' = (2nv)/(2L) = (nv)/L.
Frequencies in terms of the fundamental frequency of the original pipe in Part A that can be created when blowing air into the pipe that has a hole halfway down its length are the odd harmonics only. To achieve the same fundamental frequency f as the open-open pipe discussed in Part A, we need to use an open-closed pipe with a length of L = 2L1.
To know more about frequency visit:
https://brainly.com/question/31938473
#SPJ11
A concave refracting surface of a medium with index of refraction n placed in air may produce a real image if an object is placed outside (in air): only if the object is placed at the center of curvature only if the object is placed outside the center of curvature never always only if the object is placed inside the center of curvature
A concave refracting surface of a medium with an index of refraction "n" placed in air may produce a real image if an object is placed outside (in air) at a specific distance from the center of curvature. This distance is known as the "focal length."
The position of an image that is formed by a concave lens is determined by the distance of the object from the lens and the curvature of the lens. In the case of a concave lens, the image is formed at a location beyond the lens. The image that is formed is also inverted.
A real image is formed when light rays converge at a single point after passing through a lens. The image produced is always inverted and can be projected on a screen. The concave lens, when placed in air, has a convex curvature that causes it to diverge light. The focal length, or the distance at which light rays converge, is dependent on the curvature of the lens and the refractive index of the material of the lens. The lens has a center of curvature, which is a point located at a specific distance from the center of the lens. If an object is placed outside the center of curvature, a real image is formed.
The distance of the object from the center of curvature determines the distance of the image from the center of curvature and the size of the image. When the object is placed at the center of curvature, the image is formed at the same location, and it is of the same size as the object. When the object is placed inside the center of curvature, the image is virtual and erect.
Thus, we can say that a concave refracting surface of a medium with an index of refraction "n" placed in air may produce a real image only if an object is placed outside (in air) at a specific distance from the center of curvature.
To learn more about concave visit;
https://brainly.com/question/29142394
#SPJ11
