which row would you normally consult to find your chi-square results in a chi-square test for independence all assumptions being met? select one: a. n of valid cases b. fisher's exact test c. linear-by-linear association d. pearson chi-square

After 15 hours, 3/4 or 75% of the container will be filled with water.

The faucet drips at an average rate of 4 drops per half hour, which means that the faucet drips at a rate of 8 drops per hour. Each drop is about 1 cm^3 in volume.

The volume of the plastic container is 5 cm x 4 cm x 8 cm = 160 cm^3.

So, for every hour, the faucet drips 8 drops x 1 cm^3/drop = 8 cm^3 of water.

Therefore, in 15 hours, the faucet will drip 15 hours x 8 cm^3/hour = 120 cm^3 of water into the container.

The fraction of the container that is filled after 15 hours can be found by dividing the volume of water that drips into the container (120 cm^3) by the volume of the container (160 cm^3):

Fraction of container filled = 120 cm^3 / 160 cm^3 = 0.75

So, after 15 hours, 3/4 or 75% of the container will be filled with water.

Learn more about container here

https://brainly.com/question/29594908

#SPJ11

No, they should not adjust the parameters to weaken that character based on this sample alone.

To make a decision about adjusting the parameters of a character based on a test of significance, we need to determine if the observed outcome (winning 232 out of 400 contests) is unlikely to occur by chance alone, assuming the character's current parameters are the same. This is done by calculating a p-value, which represents the probability of observing a result as extreme or more extreme than the one we observed, assuming the null hypothesis is true (i.e., the parameters are the same).

If the p-value is very small (e.g., less than 0.05), we reject the null hypothesis and conclude that the observed outcome is unlikely to occur by chance alone and that the character's parameters may need to be adjusted. However, if the p-value is not small (e.g., greater than 0.05), we fail to reject the null hypothesis and conclude that the observed outcome is not statistically significant and that the character's parameters may not need to be adjusted.

In this case, we can calculate the p-value using a binomial test. The null hypothesis is that the probability of winning a contest is 0.5 (i.e., the character is equally likely to win or lose). The alternative hypothesis is that the probability of winning is less than 0.5 (i.e., the character is more likely to lose). Using a one-tailed binomial test with a significance level of 0.05, we find that the p-value is approximately 0.013, which is less than 0.05. Therefore, we reject the null hypothesis and conclude that the observed outcome is statistically significant and that the character's parameters may need to be adjusted.

However, it is important to note that this decision should not be based solely on this sample. It is possible that the sample is not representative of the true population of contests involving the character, and that a larger sample may lead to a different conclusion. Therefore, it is important to consider the context of the situation and gather additional information before making a final decision about adjusting the character's parameters.

Learn more about parameters, here:

brainly.com/question/30765531

#SPJ11

Option B.  4s = 360

We're given that a baseball diamond has 4 equal sides, and that the total distance around the diamond is 360 feet.

If we're supposed to use "s" for a side length and make an equation, then the 4 sides added together would equal 360:

s + s + s + s = 360

Recall that repeated addition can be rewritten as multiplication.  There are 4 "s"s, all connected by "+", so the left side of the equation could be rewritten as "4 times s", or 4*s.  Often when a number is multiplied to a letter, we don't explicitly write the multiplication sign, so it could be simplified a little further to just 4s.

So, our equation could be simplified to 4s = 360.

This is option B.

Verifying the answer

To verify the answer, we could solve the equation:

4s = 360

To solve for "s", we need to undo everything that has been done to it to get it by itself.  In this case, there is a 4 multiplied to it.  The opposite of multiplication is division, so to undo multiplying by 4, we would divide by 4.  To keep the equation balanced, we'll need to divide by 4 on both sides of the equation:

[tex]\dfrac{4s}{4}=\dfrac{360}{4}[/tex]

On the left side, the multiply by 4 and divide by 4 undo each other, leaving just s.  Evaluating the right side, gives 90.

s=90

So, if s=90, each side of the baseball diamond is 90 feet.  With 4 equal sides, going back to our original equation:  90 + 90 + 90 + 90 = 360, so the distance around the diamond equals 360 as given.

Therefore our equation (option B) was correct.

Answer:

+ 100 = 5050 .

Step-by-step explanation:

hope it's helpful to you

divide both length and width by the dialtion factor and that will be the dimensions of the new rectangle. 2.5714in by 3.4286in. Round as needed

The value of x is 2. The dimensions of the new rectangle after dilation are 16 inches by 18 inches, and its area is 288 square inches as required.

The dimensions of the original rectangle are 8 inches by 9 inches. When the rectangle is dilated by a scale factor of x, its dimensions become 8x inches by 9x inches. To find the value of x, we can use the area of the new rectangle which is 288 square inches.
The area of a rectangle is calculated by multiplying its length and width. So, for the new rectangle, the area is (8x)(9x) = 288. By multiplying the dimensions, we get 72x^2 = 288. To find the value of x, divide both sides by 72:
x^2 = 288 / 72
x^2 = 4
Now, take the square root of both sides to find the value of x:
x = √4
x = 2
So, the value of x is 2. The dimensions of the new rectangle after dilation are 16 inches by 18 inches, and its area is 288 square inches as required.

To know more about rectangle visit :

https://brainly.com/question/14207995

#SPJ11

Answer:

--------------------------

Calculate the total number of payments:

Calculate the total amount paid:

So, the Wong family will pay a total of $358200 in principal and interest.

The total principal is $358200 and the interest is $168200.

Given that, the Wong family bought a $190,000 home in 2001.

The monthly payment, not including property taxes and insurance, is $995.

Total money for 30 years = 30×12×995

= $358200

Here, the principal =$190,000 and the interest = 358200-190,000

= $168200

Therefore, the total principal is $358200 and the interest is $168200.

To learn more about the mortgage payments visit:

https://brainly.com/question/17329729.

#SPJ1

Yes, function notation can be used to add two functions. we can compose the two functions to get the velocity as a function of time.

To add two functions f(x) and g(x), we simply add their output values for the same input value x. So, (f+g)(x) = f(x) + g(x).

In the given example, f(x) = 3x + 2 and g(x) = 4x. Therefore, (f+g)(x) = 3x + 2 + 4x = 7x + 2.

We can also compose functions, such as f(g(x)) which means applying function g to x and then applying function f to the result. In the given example, f(g(x)) = f(4x) = 3(4x) + 2 = 12x + 2.

Function composition can be useful in situations where we want to model complex systems as a series of simpler functions. For example, in physics, the position of an object may be modeled as a function of time, and the velocity of the object may be modeled as the derivative of the position function with respect to time. In this case, we can compose the two functions to get the velocity as a function of time.

Learn more about velocity here

https://brainly.com/question/80295

#SPJ11

The probability that in a group of seven people, there is more than one with the same birth month is approximately 50.7%.

The probability of two people having the same birth month is 1/12. Thus, the probability of all seven people having different birth months is (11/12)⁶, as the first person can have any birth month and the remaining six must have different ones. Therefore, the probability of at least two people having the same birth month is 1 - (11/12)⁶, which equals approximately 0.507, or 50.7% when rounded to one decimal place.

Learn more about probability

https://brainly.com/question/24756209

#SPJ4

The area of the base of the refrigerator is 1260 sq inches

From the question, we have the following parameters that can be used in our computation:

Base of the refrigerator

The dimension of the base of the refrigerator is given as

Length = 35 inches

Width = 36 inches

The area of the base of the refrigerator is then calculated as

Area = Length * Width

substitute the known values in the above equation, so, we have the following representation

Area = 35 * 36

Evaluate

Area = 1260

Hence, the area of the base of the refrigerator is 1260 sq inches

Read more about area at

https://brainly.com/question/24487155

#SPJ1

Complete question

Jacobs refrigerator is shown below. What is the area of the base of the refrigerator? Where the dimension of the base of the refrigerator are 35 inches by 36 inches

A continuous function is a function where small changes in the input result in small changes in the output, with no abrupt jumps or breaks in the function's graph.

Since f(x,y) is independent of x, we can write it as f(x,y) = g(y). We are given that the integral of g(x) from 0.3 to 10 is 1, so we can write:

∫0.3^10 g(x) dx = 1

Using this information, we can find g(y) by integrating g(x) with respect to x:

g(y) = ∫0.3^10 g(x) dx / ∫0^10 dx
g(y) = 1 / 9.7

Now, we can find f(x,y) by substituting g(y) into f(x,y) = g(y):

f(x,y) = g(y) = 1 / 9.7

We need to find the integral of f(x,y) over the rectangle R, which is:

∫0^3 ∫0^10 f(x,y) dy dx
∫0^3 ∫0^10 1 / 9.7 dy dx
(1 / 9.7) ∫0^3 ∫0^10 dy dx
(1 / 9.7) * 3 * 10
= 3.0928

Therefore, the value of the integral of f(x,y) over the rectangle R is 3.0928.

To know more about continuous function visit:

https://brainly.com/question/30501770

#SPJ11

The slope of the line is -4 which represents the swimmer will complete 4 laps per minute.

Here, we have,

In real world scenario it means how many laps they can complete per minute.

Let us consider the coordinate on the y-axis and the x-axis be ,

( x₁ , y₁ ) = ( 0, 24 )

( x₂ , y₂ ) = ( 6, 0)

The slope of a line represents the rate of change between two variables.

Here, the slope of the line represents the rate at which the number of laps remaining changes with respect to time.

Slope = ( y₂ - y₁ ) / ( x₂ - x₁ )

        = ( 0 - 24 ) / ( 6 - 0 )

        = -4

Since the slope of the line is -4, this means that for every one minute that passes.

The swimmer completes 4 laps since the slope is negative, the number of laps remaining decreases as time increases.

So in this scenario, the slope of the line tells us that the swimmer is completing laps at a rate of 4 laps per minute.

And that they will finish the race after 6 minutes when they have completed all 24 laps.

Therefore, slope of line is -4 represents the swimmer's lap completion rate which means swimmer will complete 4 laps every minute.

learn more about slope here

brainly.com/question/31709670

#SPJ1

Answer:

The slope of the line is -1/2, which means that the swimmer completes a lap in 1/2 of a minute

Step-by-step explanation:

Answer:3 hours

Step-by-step explanation:

if you take fifteen off of 6.45 you get six thirty then subtract the break to get 3 hours

Answer:

3 hours

Step-by-step explanation:

6:45 - 30 minutes = 6:15 and she started it at 3:15. 6-3 = 3 so she spent 3 hours on her homework

Answer:

7/4x² + 2x + 3/4

Step-by-step explanation:

Combine like terms:

3/4x² + x² + x + x + 3/4

= 7/4x² + 2x + 3/4

Answer:

3

Step-by-step explanation:

pairs of pants=4

t-shirts=3

shoes=2

Answer:

A is the answer

the test of the options are not the answer

Given |x - 2| <= 4, which of the following equation is C. x - 2 <= 4 && x - 2 >= -4.

The absolute value of (x - 2) represents the distance between x and 2 on the number line. The inequality |x - 2| <= 4 means that the distance between x and 2 is less than or equal to 4.

To solve for x, we can break it down into two inequalities:
1. x - 2 <= 4, which means x <= 6
2. -(x - 2) <= 4, which means -x + 2 <= 4, then -x <= 2, then x >= -2

Combining these two inequalities, we get:
x - 2 <= 4 && x - 2 >= -4

Therefore, the correct answer is C.

When solving an inequality involving absolute value, it's helpful to break it down into two separate inequalities and then combine them. In this case, we found that the correct answer is C.

To know more about distance, visit:

https://brainly.com/question/31713805

#SPJ11

Jerry spent 3/5 hour (or 0.6 hours) playing kickball. Time spent playing kickball = 3/5 hours

Jerry played outside for a total of 2 4/5 hours. He played tag for 2/5 hour and basketball for 1 4/5 hours. We can find the total time he spent playing tag and basketball as:

Total time spent on tag and basketball = 2/5 hour + 1 4/5 hours

Converting 1 4/5 hours to an improper fraction, we get:

1 4/5 hours = 9/5 hours

So, the total time spent on tag and basketball is:

2/5 hour + 9/5 hours = 11/5 hours

To find the time Jerry spent playing kickball, we need to subtract the time he spent on tag and basketball from the total time he played outside. So, we can write:

Time spent playing kickball = Total time played outside - Time spent on tag and basketball

Substituting the values, we get:

Time spent playing kickball = 2 4/5 hours - 11/5 hours

Converting 2 4/5 hours to an improper fraction, we get:

2 4/5 hours = 14/5 hours

So, the time Jerry spent playing kickball is:

Time spent playing kickball = 14/5 hours - 11/5 hours

Time spent playing kickball = 3/5 hours

Therefore, Jerry spent 3/5 hour (or 0.6 hours) playing kickball.

Learn more about kickball here

https://brainly.com/question/9871131

#SPJ11

Approximately 382.06 square inches of cloth are cut out from the square.

Let's consider a square piece of cloth with a side length of 42 inches. We need to find out the area of the cloth that is cut out when a circle is inscribed in it. We know that the circle touches all the sides of the square, which means that the diameter of the circle is equal to the side length of the square.

In this case, the hypotenuse is the diagonal of the square, and the other two sides are the sides of the square. Using the Pythagorean theorem, we get:

Diagonal of square = √(42² + 42²)

= √(2*42²)

= 42√2 inches

Since the diameter of the circle is equal to the side length of the square, it can be calculated as:

Diameter of circle = 42 inches

The radius of the circle is half of the diameter, which is equal to:

Radius of circle = 21 inches

The area of the circle can be calculated using the formula:

Area of circle = πr²

Substituting the value of radius and π, we get:

Area of circle = 3.14 x 21²

= 3.14 x 441

= 1381.94 in² (approx)

Therefore, the area of cloth cut out from the square is equal to the area of the circle, which is approximately 1381.94 square inches. However, we need to subtract this area from the area of the square to get the shaded area. The area of the square can be calculated using the formula:

Area of square = side²

Substituting the value of side, we get:

Area of square = 42²

= 1764 in²

Subtracting the area of the circle from the area of the square, we get:

Shaded area = Area of square - Area of circle

= 1764 - 1381.94

= 382.06 in² (approx)

To know more about circle here

https://brainly.com/question/483402

#SPJ1

Answer:Exponetial functions of form ()=^x+c in the exponetial function stants for the y-intercept

If a is greater than 1, then we say we have exponetial growth

if a is less than 1 then we say we have exponetial decay

the domain and range for a basic exponetial function is a is original amount, b is slope (how much it doubled) c is the y-intercept

Step-by-step explanation:

Answer:

  Does Not Exist (DNE)

Step-by-step explanation:

You want the limit of f(x) = 1/(x-3) as x approaches 3.

The limit at a point exists if and only if the left limit at that point is equal to the right limit at that point.

F(x) = 1/(x -3) changes sign at x = 3, so the left limit and right limit have opposite signs. The limit at x = 3 does not exist.

When an object receives an applied net force, the velocity versus time graph will show a change in velocity over time. Therefore, the velocity versus time graph is a useful tool for analyzing the effects of net force on an object's motion.

When an object receives an applied net force, its velocity versus time graph will show the following characteristics:

1. A non-zero slope: The slope of the velocity vs. time graph represents the acceleration of the object. Since a net force is applied, the object will experience acceleration, and the graph will have a non-zero slope.

2. Linear relationship: If the net force applied is constant, the acceleration will also be constant. This results in a linear relationship between velocity and time on the graph. The slope of the graph will indicate the acceleration of the object, which is directly proportional to the net force applied. As the net force increases, the acceleration and slope of the graph will also increase.

3. Positive or negative slope: The direction of the slope depends on the direction of the applied force. If the net force is in the same direction as the object's initial velocity, the slope will be positive, indicating an increase in velocity. If the force is in the opposite direction, the slope will be negative, indicating a decrease in velocity.

In summary, the velocity vs. time graph of an object receiving an applied net force will have a linear relationship with a non-zero slope, which can be either positive or negative depending on the direction of the force.

Learn more about Graph:

brainly.com/question/17267403

#SPJ11

Answer:

1. 320 m

2. 138 pounds

Step-by-step explanation:

To obtain the perimeter of a shape, you just add all of the sides.

So here the pentagon has 5 sides in total and they're the same length. This implies that the perimeter = 5 × Length.

So 5 × Length = 1600 m

Length)= 1600 ÷ 5 = 320 m

2. Total weight here means that Maya's weight plus the cat's weight together is equal to 157. To obtain Maya's weight, we take the total and minus (remove) the cat's weight from it.

Maya's weight = Total - cat's weight = 157 - 19 = 138 pounds

A correlation coefficient is the best instrument that is used to determine the predictive validity of a metric scale. So, option(A) is right one.

Scales are used to measure some of the complex facets of individuals have to meet a certain criteria, which we can do statistically. But most of these statistical processes are actually done incorrectly, such that scientific validity may not be as high as articles claim. We have to determine the best instrument for predicting the validity of metric scale. Metric scales are used to measure quantitative characteristics or variables.

The correlation coefficient of two different psychometric measures, which assesses how comparable two different measures of a construct are, can contribute to our understanding of criterion validity. It is measured on a scale that varies from + 1 through 0 to – 1.

Hence, the instrument for predicting validity of metric scale is a correlation coefficient.

For more information about correlation coefficient, visit:

https://brainly.com/question/28196194

#SPJ4

To reverse the order of integration, we need to rewrite the limits of integration in terms of the other variable.
The value of the given integral by reversing the order of integration is (5/12)([tex]e^{24}[/tex] - 1).

The given integral is ∫∫ [tex]5e^{(2x)}[/tex] dx dy, where the limits of x are from 0 to 4 and the limits of y are from 0 to 3y.
To integrate with respect to y first, we need to express the limits of y in terms of x.
From the limits of y given, we have 0 ≤ y ≤ 3y, which simplifies to 0 ≤ y.
Now we need to find the upper limit of y. To do this, we set the expression for the upper limit equal to the constant 12, which is the upper limit of x.
So we have 3y = 12, which gives y = 4.
Thus, the limits of integration become ∫∫ [tex]5e^{(2x)}[/tex] dy dx, where the limits of y are from 0 to 4 and the limits of x are from 0 to 3y.
Now we can integrate with respect to y:

∫∫ [tex]5e^{(2x)}[/tex] dy dx = ∫ 0^4 ∫ 0^(3y) [tex]\int\limits^4_0 \int\limits^{(3y)}_0 5e^{(2x)} dx dy[/tex]
= [tex]\int\limits^4_0  [5/2 e^{(2x)}]_0^{(3y)} dy[/tex]
= [tex]\int\limits^4_0  [5/2 (e^{(6y)} - 1)] dy[/tex]
= [tex][5/12 (e^{(6y)} - 1)]_0^4[/tex]
= [tex](5/12)(e^{24} - 1)[/tex]
Note that the order of integration can be reversed if the integrand is continuous on a rectangular region that contains the original region of integration.

To learn more about integration, refer:-

https://brainly.com/question/18125359

3SPJ11

The surface integral of the given function over the given surface is pi sqrt(17)/2.

To evaluate the surface integral of the given function over the given surface, we need to use the formula:

∫∫f(x, y, z) dS = ∫∫f(x, y, z) ||r_u x r_v|| dA

where r(u, v) = (u, v, 4 - u^2 - v^2), (u, v) ∈ D, D is the projection of S on the xy-plane.

Since the surface lies in front of the plane x=0, we can take D as the unit circle in the xy-plane centered at the origin.

So, r(u, v) = (u, v, 4 - u^2 - v^2) and we have

r_u = (1, 0, -2u), r_v = (0, 1, -2v)

Thus, ||r_u x r_v|| = ||<2u, 2v, 1>|| = sqrt(4u^2 + 4v^2 + 1).

Hence, the surface integral becomes

∫∫f(x, y, z) ||r_u x r_v|| dA

= ∫∫f(u, v, 4 - u^2 - v^2) sqrt(4u^2 + 4v^2 + 1) dA, where (u, v) ∈ D

Now, we need to evaluate the given function f(x, y, z) = x + y^2 + z^2 over the surface S.

Since S is part of the paraboloid x = 4 - y^2 - z^2, we can substitute x = 4 - y^2 - z^2 in the expression for f(x, y, z) to get

f(x, y, z) = 4 - y^2 - z^2 + y^2 + z^2 = 4

Therefore, the surface integral reduces to

∫∫f(x, y, z) ||r_u x r_v|| dA = 4 ∫∫sqrt(4u^2 + 4v^2 + 1) dA, where (u, v) ∈ D

To evaluate this integral, we need to switch to polar coordinates.

Let u = r cos(theta) and v = r sin(theta), where 0 ≤ r ≤ 1 and 0 ≤ theta ≤ 2π.

Then, sqrt(4u^2 + 4v^2 + 1) = sqrt(4r^2 + 1)

Also, the area element in polar coordinates is dA = r dr d(theta)

Hence, the surface integral becomes

4 ∫∫sqrt(4u^2 + 4v^2 + 1) dA = 4 ∫∫sqrt(4r^2 + 1) r dr d(theta), where 0 ≤ r ≤ 1 and 0 ≤ theta ≤ 2π

Integrating with respect to r first, we get

4 ∫∫sqrt(4r^2 + 1) r dr d(theta) = 2 ∫0^2π [sqrt(17)/4 - sqrt(1)/4] d(theta) = pi sqrt(17)/2

Therefore, the surface integral of f(x, y, z) = x + y^2 + z^2 over S is pi sqrt(17)/2.

Learn more about surface integral

brainly.com/question/15177673

#SPJ11

To find two unit vectors that make an angle of 60° with v = 3, 4, we first need to find the magnitude of v. Using the Pythagorean theorem, we can calculate the magnitude of v. The two unit vectors that make an angle of 60° with v = (3, 4) are u1 and u2.

|v| = sqrt(3^2 + 4^2) = 5

Next, we need to find the unit vector in the direction of v. This can be done by dividing each component of v by its magnitude:

u = v/|v| = (3/5, 4/5)

Now we need to find two unit vectors that make an angle of 60° with u. To do this, we can use the formula for rotating a vector counterclockwise by an angle θ:

v' = cos(θ)v + sin(θ)u

Since we want two vectors that make an angle of 60° with u, we can use θ = ±60°. Plugging in these values, we get:

v₁ = cos(60°)v + sin(60°)u = (1/2)3 + (sqrt(3)/2)4, (1/2)4 - (sqrt(3)/2)3
   = (3/2 + 2sqrt(3), 2 - 3sqrt(3)/2)
   ≈ (3.732, -0.598)

v₂ = cos(-60°)v + sin(-60°)u = (1/2)3 - (sqrt(3)/2)4, (1/2)4 + (sqrt(3)/2)3
   = (-3/2 + 2sqrt(3), 2 + 3sqrt(3)/2)
   ≈ (-1.732, 4.598)

Thus, two unit vectors that make an angle of 60° with v = 3, 4 are v₁ ≈ (3.732, -0.598) and v₂ ≈ (-1.732, 4.598).
To find two unit vectors that make an angle of 60° with v = (3, 4), we can use the following steps:

1. Calculate the magnitude of v: |v| = √(3² + 4²) = 5
2. Normalize v: v_norm = (3/5, 4/5)
3. Use the vector rotation formula to find the two unit vectors:

First unit vector, u1:
Rotate v_norm 60° counterclockwise:
u1_x = (3/5)cos(60°) - (4/5)sin(60°)
u1_y = (3/5)sin(60°) + (4/5)cos(60°)
u1 = (u1_x, u1_y)

Second unit vector, u2:
Rotate v_norm 60° clockwise:
u2_x = (3/5)cos(-60°) - (4/5)sin(-60°)
u2_y = (3/5)sin(-60°) + (4/5)cos(-60°)
u2 = (u2_x, u2_y)

So, the two unit vectors that make an angle of 60° with v = (3, 4) are u1 and u2.

Learn more about Pythagorean theorem at: brainly.com/question/14930619

#SPJ11

a. The resultant velocity is vector sum of the boat's velocity and the tidal current's velocity.

b. resultant speed = 36 km/hr

c. The resultant bearing of the power boat is therefore S38 degrees W

d. distance = 60 km

a. Sketch the scenario:
- The power boat is moving southward at an angle of 5 degrees west of south.
- The tidal current is moving eastward at an angle of 65 degrees south of east.
- The resultant velocity of the power boat will be the vector sum of the boat's velocity and the tidal current's velocity.

b. To find the resultant speed of the power boat, we need to use the Pythagorean theorem to find the magnitude of the resultant velocity vector:

resultant speed = sqrt((24 km/hr)^2 + (12 km/hr)^2 + 2(24 km/hr)(12 km/hr)cos(150))
resultant speed = sqrt(576 + 144 + 576) = sqrt(1296) = 36 km/hr (rounded to the nearest km/hr)

c. To find the resultant bearing of the power boat, we need to use trigonometry to find the angle between the resultant velocity vector and the southward direction:

tan(theta) = (12 km/hr sin(65))/(24 km/hr + 12 km/hr cos(65))
theta = atan((12 km/hr sin(65))/(24 km/hr + 12 km/hr cos(65)))
theta = 33 degrees (rounded to the nearest degree)
The resultant bearing of the power boat is therefore S38 degrees W (since it was initially traveling at S5 degrees W).

d. To find the distance the power boat has traveled after 2.5 hours, we can use the formula:
distance = speed x time
The power boat's speed relative to the water is still 24 km/hr, so the distance it has traveled is:
distance = 24 km/hr x 2.5 hours = 60 km

Know more about the vector sum

https://brainly.com/question/2927458

#SPJ11

if X is a uniformly distributed continuous random variable from 0 to 1. Let Y=-In(1-X), the probability that Y is less than 3 is 0.9502. This falls within the specified margin of error of +/- 0.01,

To find the probability that Y is less than 3, we first need to determine the cumulative distribution function (CDF) of variable Y. Let's begin by finding the distribution of Y.

Y = -ln(1 - X)

Taking the derivative of Y with respect to X, we get:

dY/dX = -1 / (1 - X)

Now, we can use the probability density function (PDF) of X to find the PDF of Y:

f_Y(y) = f_X(g^-1(y)) * |(dg^-1(y) / dy)|

where g(x) = -ln(1-x), g^-1(y) = 1 - e^-y, and |(dg^-1(y) / dy)| = e^-y.

Since X is uniformly distributed from 0 to 1, its PDF is f_X(x) = 1 for 0 <= x <= 1.

Thus, we have:

f_Y(y) = 1 * e^-y = e^-y

for y > 0.

Now, let's find the CDF of Y:

F_Y(y) = P(Y <= y)

      = P(-ln(1-X) <= y)

      = P(1-X >= e^-y)

      = P(X <= 1-e^-y)

Since X is uniformly distributed from 0 to 1, its CDF is:

F_X(x) = x for 0 <= x <= 1

Therefore, we have:

F_Y(y) = F_X(1-e^-y) = 1 - e^-y

for y > 0.

Now, we can find the probability that Y is less than 3:

P(Y < 3) = F_Y(3)

        = 1 - e^-3

        = 0.9502 (rounded to four decimal places)

Therefore, the probability that Y is less than 3 is 0.9502. This falls within the specified margin of error of +/- 0.01, so we can be confident in our result.

In summary, we first found the distribution of Y by taking the derivative of Y with respect to X and using the PDF of X. We then found the CDF of Y by using the CDF of X and the inverse function of Y. Finally, we used the CDF of Y to find the probability that Y is less than 3, which was within the specified margin of error.

More about probability: https://brainly.com/question/13604758

#SPJ11

The statement "The statistical inference concerning the difference between two population proportions is used for categorical data" is true.

In statistics, a categorical variable is one that takes on a limited number of distinct values, such as yes or no, true or false, or red, green, or blue. Examples of categorical data include gender, race, political affiliation, and type of car. Proportions are commonly used to summarize categorical data.

When we want to compare the proportions of two categorical variables between two populations, we use the statistical inference concerning the difference between two population proportions. This is a hypothesis testing procedure that allows us to determine whether the difference between the sample proportions is statistically significant or simply due to chance. The null hypothesis is that there is no difference between the proportions, while the alternative hypothesis is that there is a significant difference. The test statistic used for this inference is the z-statistic, which follows a standard normal distribution under the null hypothesis. The result of the test can be used to make inferences about the population proportions.

To learn more about categorical variable, click here:

brainly.com/question/24244518

#SPJ11

It is difficult to provide a specific probability without considering all of these factors.

Unfortunately, I cannot provide a specific answer without additional information about the kicker's past performance and current conditions such as weather, distance of the kick, and pressure of the situation. However, the probability of a kicker making a field goal attempt is influenced by several factors, including the kicker's skill level, distance of the kick, wind and weather conditions, and pressure of the situation. When it comes to a kicker's skill level, their past performance can provide some indication of their success rate. Factors such as the distance of the kick, wind and weather conditions, and pressure of the situation can all impact the likelihood of success. For example, a kicker may have a higher success rate on shorter kicks, in ideal weather conditions, and in non-pressure situations. On the other hand, longer kicks, adverse weather conditions, and high-pressure situations may decrease the likelihood of success. Ultimately, it is difficult to provide a specific probability without considering all of these factors.

Learn more about probability here

https://brainly.com/question/13604758

#SPJ11

Answer: The margin of error for the mean amount of coffee consumed by undergraduate students is approximately 0.5.

Step-by-step explanation:

The margin of error for the mean amount of coffee consumed by undergraduate students is the distance between the sample mean and the upper or lower bound of the confidence interval. Since the confidence interval is given as (34.5, 35.5), the margin of error is:

Margin of error = (Upper bound - Sample mean) = (35.5 - 35) = 0.5

Or, it can be calculated as:

Margin of error = (1.96) * (Standard error of the mean) = (1.96) * (6/sqrt(513)) = 0.507

Either way, the margin of error for the mean amount of coffee consumed by undergraduate students is approximately 0.5

Learn more about margin of error here, https://brainly.com/question/10218601

#SPJ11