Which single transformation can be applied to the graph of y = 72 StartRoot x EndRoot to produce the graph of y = 9 StartRoot x EndRoot?

The image of the histogram distribution is missing, so i have attached it.

Answer:

Option C: The distribution is unimodal. Its mode is near 60 inches

Step-by-step explanation:

Mode simply means the most occurring value in a set of data.

Now, for histogram, the mode is the highest peak represented in the bars.

Now, from the image attached, it is seen that there is a clear highest peak. Thus, the histogram has only one peak and it can be described as unimodal.

We are not given the mode height from the histogram but we can see that it is between 60 and 68 inches. And if carefully observed it will have a value closer to 60.

Thus,option C is correct.

Answer:

2

Step-by-step explanation:

7/8 is a answer of this question

A.

-5 is less than 0 so it should be A.

Answer:

A

Step-by-step explanation:

Number line

-5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5

If you look where -5 is its way behind 4 and 5 s after so the answer is (a)

the answer would be 15:6:33. in the original ratio, the middle number is 2. to get 6 in the new ratio, you’d have to multiply it by 3. in that sense, to get the other numbers in the new ratio, you would multiply the other numbers in the old ratio by 3, too.

Answer:

2(6) + 2(x + 10)

hope this helps <3

The algebraic expression to represent the rectangle's perimeter is (2x + 32)cm.

An algebraic expression in mathematics is an expression which is made up of variables and constants, along with algebraic operations.

Length of rectangle = 6cm

Width of rectangle = (x + 10)cm

Perimeter of rectangle = 2(length + breadth) = 2(6 + x + 10) = (2x + 32)cm

Learn more about algebraic expression here

https://brainly.com/question/953809

#SPJ3

Answer:

y = 6x-10 or y-2 = 6(x-2)

Step-by-step explanation:

If two lines are parallel, it means that they have the same slope.

From the question, we are told that line j is parallel to k, this means that line j has the same slope as k.

First we need to determine the skipe of the like j.

Given equation of line j expressed as

y − 6 = 6(x − 4). To get the slope, we will compare the equation with the general equation y = mx+c where m is the slope.

Rewrite the given equation in standard form

y − 6 = 6(x − 4)

y-6 = 6x-24

y = 6x-24+6

y = 6x-18

Comparing this with y = mx+c, m = 6

Hence the slope of line k is also 6.

The equation of line k passing through the point (2,2) is expressed using the formula y-y0 = m(x-x0)

x0 = 2 and y0 = 2

y-2 = 6(x-2)

y-2 = 6x-12

y = 6x-12+2

y = 6x-10

Hence the equation of the line k in slope intercept form is y = 6x-10

Answer:

96

Step-by-step explanation:

The correct statements are:An activity relationship diagram reveals qualitative factors that may be crucial to the workstation placement decision.

Assembly line layouts rarely facilitate progressive assembly through the use of material handling systems or devices.

Most would consider it desirable for a department store to put the candy department next to the toy department.

The incorrect statements are:

Systemic layout planning is most appropriate when the numerical flow of items between workstations is not known. (Systematic layout planning is more appropriate in this case.)

Assembly lines are best suited for products with multiple parts produced in small volumes. (Assembly lines are typically suited for products with high volumes and repetitive processes.)

Interworkcenter flow charts involve a relationship chart showing the degree of importance of locating workstations near each other. (Interworkcenter flow charts typically show the physical flow of materials or information between workstations.)

Learn more about factors here:

https://brainly.com/question/14549998

#SPJ11

Answer:

its 84 but tysm thats so sweet

Step-by-step explanation:

Answer:

[tex]\boxed{84}[/tex]

Step-by-step explanation:

[tex]12 \times 7 = 84[/tex]

Have a great day or night!

The required answer would be -25 which is evaluated by the PEMDAS rule.

PEMDAS rule states that the order of operation starts with the calculation enclosed in brackets or the parentheses first. Exponents (degrees or square roots) are then operated on, followed by multiplication and division operations, and then addition and subtraction.

We have been given that expression as

⇒ 1 + (-2-5)2 + (14-17) × 4

To determine the evaluation of the given expression  

⇒ 1 + (-2-5)2 + (14-17) × 4

We have to apply the PEMDAS rule in the expression

As per the PEMDAS rule, the solution would be:

⇒ 1 + (-7)×2 + (-3) × 4

⇒ 1 + -14 + -12

⇒ 1 - 14 - 12

⇒ 1 - 26

⇒ -25

Therefore, the required answer would be -25.

Learn more about the PEMDAS rule here :

https://brainly.com/question/20876480

#SPJ2

Answer:

-1 + (-5)

-1 + 5

Step-by-step explanation:

Hope that helps and have a great day!

If you want me to explain, let me know!

The 1 3/4, 12, 18, 19 1/2, and 21 inches are equal in length to 91.5 inches.

To find out how many inches are equal in length to 1 3/4, 12, 18, 19 1/2, and 21,

we need to add them up.1 3/4 is equal to 1.75 inches, 12 inches is equivalent to 1 foot, 18 inches is equivalent to 1.5 feet, 19 1/2 inches is equal to 1.625 feet, and 21 inches is equal to 1.75 feet.

In total, we have 1.75 + 1 + 1.5 + 1.625 + 1.75 feet which is equivalent to 7.625 feet.To convert this into inches,

we will multiply the total number of feet by 12 because there are 12 inches in a foot. Thus, 7.625 feet * 12 inches per foot = 91.5 inches.Therefore, 1 3/4, 12, 18, 19 1/2, and 21 inches are equal in length to 91.5 inches.

To learn more about :  length

https://brainly.com/question/28322552

#SPJ8

This answer discusses how to convert various units to inches, but the initial question did not provide clear values for conversion.

The question seems to be asking about converting certain values into inches. However, it's not clear what the values being converted are. For clarity, 1 inch is equivalent to 2.54 centimeters, 0.0254 meters, or 0.394 inches depending on the conversion being used. For example, if you had a measurement of 1.75 feet, you could convert it to inches by multiplying by 12 (because there are 12 inches in a foot) to get 21 inches.

https://brainly.com/question/22028559

#SPJ11

Answer:

OB is the ray between OC and OA

Step-by-step explanation:

If my answer helped, kindly mark me as the brainliest!!

Thank You!

Answer:

La longitud de BC es 15 cm y la longitud AB es 45 cm

Step-by-step explanation:

Ecuaciones

Tenemos un segmento AC de longitud 60 cm, dividido en dos segmentos BC y AB tal que:

AB+BC=60 cm

También sabemos que AB=3BC. Reemplazando en la ecuación anterior, tenemos:

3BC+BC=60 cm

Reuniendo términos semejantes:

4BC=60 cm

Despejando BC:

BC=60/4 = 15 cm

Como AB=3BC, entonces

AB=3*15= 45 cm.

La longitud de BC es 15 cm y la longitud AB es 45 cm

Isometric perspective refers to a system of diagonal lines that are parallel without converging. This perspective is commonly used in technical drawings and architectural illustrations to represent three-dimensional objects in a visually balanced and proportional manner.

Isometric perspective is a method of representing three-dimensional objects on a two-dimensional surface. It involves creating an illusion of depth and dimension by using a specific set of rules for drawing lines and angles. Isometric perspective is characterized by the use of parallel lines that remain parallel and do not converge, creating a sense of uniformity and stability in the representation.

In isometric perspective, the lines are typically drawn at a 30-degree angle from the horizontal plane. This angle creates a sense of depth and allows for accurate scaling of the object's dimensions. The vertical lines remain vertical, while the horizontal lines are drawn at a 30-degree angle to the horizontal plane.

Unlike other perspective techniques, such as linear perspective, isometric perspective does not include vanishing points or converging lines. Instead, it relies on the principle that all lines that are parallel in reality remain parallel in the isometric representation.

By following the rules of isometric perspective, an artist or designer can accurately depict the three-dimensional qualities of an object in a two-dimensional format. This technique is widely used in technical drawings, architectural illustrations, and engineering diagrams, as it provides a clear and consistent representation of objects from various angles.

for such more question on Isometric

https://brainly.com/question/4289712

#SPJ8

Answer:

P= 80 + 20x

Step-by-step explanation:

80 is base and 20 per x computer

The equation for 'P', representing Claire's total pay on a day on which she sells 'x' computers is → P = 80 + 20x

Equation modelling is the process of writing a mathematical verbal expression in the form of a mathematical expression for correct analysis, observations and results of the given problem.

Given is Clair who makes a base pay of $80 each day and then is paid a $20 commission for every sale of computer she makes.

We can model the equation for Clair's total pay as follows -

P = base pay + (number of sold computer) × (cost of 1 computer)

P = 80 + 20x

Therefore, the equation for 'P', representing Claire's total pay on a day on which she sells 'x' computers is → P = 80 + 20x

To solve more questions on Equation modelling, visit the link below-

brainly.com/question/28825586

#SPJ2

The difference between the forecourt of 65 and the forecourt of 45 is 2200.

To find the difference between the places of 65 and 45, we need to cipher each square independently and find the difference between the two results.

A number squared is attained by multiplying the figures themselves. So let's calculate the places of 65 and 45.

65 places

65 * 65 = 4225

45 places

45 * 45 = 2025

Now try to find the difference between these two places.

4225- 2025 = 2200

So the difference between the forecourt of 65 and the forecourt of 45 is 2200.

To unfold on this, consider the following

A forecourt of 65, or 4225, represents the area of a square with 65 units on each side. also, 45 places( 2025) represents the area of a square with 45 units on each side.

Abating the area of the lower forecourt( 2025) from the area of the larger forecourt( 4225) gives the area difference, which is 2200 square units.

This means that the large square corresponding to 65 places has an fresh area of 2200 square units compared to the lower square corresponding to 45 places.

In summary, the difference between the forecourt of 65 and the forecourt of 45 is 2200.

For more question on difference visit:

https://brainly.com/question/25433540

#SPJ8

Answer:

they are equal

Step-by-step explanation:

48:32=3:2

The area of the water's surface is approximately 981.25 square units.

Since the water depth is 10, the water fills up half of the hemispheric bowl. Therefore, we need to find the surface area of a circle with radius 25 (the base of the hemisphere) and divide it by 2.

The surface area of a circle with radius r is given by A = πr^2. So, the surface area of the circle with radius 25 is:

A = π(25)^2 = 625π

Dividing by 2, we get

625π/2

So the surface area of the water's surface is 625π/2 square units.

Approximating the value of π as 3.14, we get:

625π/2 ≈ 625(3.14)/2 ≈ 981.25

For such more questions on area

https://brainly.com/question/25292087

#SPJ8

George and Wanda file married joint and receive $9,750 of dividend income from stocks owned by George.

So the combined social security benefits that they have received in a year is $31,100.Now the provisional income is calculated which is defined as the sum of social security benefits received and all other taxable income. Provisional income is calculated as follows:

Provisional income = social security benefits + all other taxable income Provisional income for George and Wanda can be calculated as: Provisional income = $31,100 (social security benefits) + $5,300 (interest from jointly owned City of Ranburne Bonds and dividend income) + $9,750 (dividend income from stocks owned by George) Provisional income = $46,150 Now the taxable amount of social security benefits will be calculated.

Taxable social security benefits = lesser of (50% × social security benefits) or [50% × (provisional income − base amount)] Base amount for married individuals filing a joint return = $32,000 Now taxable social security benefits for George and Wanda will be calculated as follows: Taxable social security benefits for George = lesser of (50% × $12,000) or [50% × ($46,150 − $32,000)] Taxable social security benefits for George = $1,075 Taxable social security benefits for Wanda = lesser of (50% × $19,100) or [50% × ($46,150 − $32,000)] Taxable social security benefits for Wanda = $5,075

In this question, we need to determine the amount of social security benefits that George and Wanda must include in their gross income under different independent situations. The calculation of taxable social security benefits will depend on the type of return that they file and the total dividend income that they receive.In the first situation, George and Wanda file a married joint return and receive $9,750 of dividend income from stocks owned by George. The provisional income for George and Wanda is calculated by adding all taxable income to the social security benefits. The formula for calculating the provisional income is Provisional income = social security benefits + all other taxable income. The provisional income for George and Wanda is $46,150. The taxable amount of social security benefits is calculated as per the IRS guidelines, which state that the taxable amount will be the lesser of 50% of the social security benefits or 50% of the provisional income minus the base amount. The base amount for married individuals filing a joint return is $32,000. The taxable social security benefits for George are $1,075, and for Wanda, they are $5,075.In the second situation, George and Wanda file a married separate return and receive $9,750 of dividend income from stocks owned by George. The calculation of taxable social security benefits will be different in this case as the base amount for married individuals filing a separate return is $0. The provisional income for George and Wanda is $46,150. The taxable social security benefits for George are $1,075, and for Wanda, they are $5,075.In the third situation, George and Wanda file a married joint return and receive $34,200 of dividend income from stocks owned by George. The provisional income for George and Wanda is $79,050. The taxable social security benefits for George are $7,700, and for Wanda, they are $9,925.In the fourth situation, George and Wanda file a married joint return and receive $17,100 of dividend income from stocks owned by George. The provisional income for George and Wanda is $62,950. The taxable social security benefits for George are $3,925, and for Wanda, they are $7,050.

Thus, the amount of social security benefits that George and Wanda must include in their gross income is different in each independent situation. The calculation of taxable social security benefits depends on the type of return they file and the total dividend income they receive.

To know more about gross income :

brainly.com/question/2194020

#SPJ11

Answer:

MNK = TRP

MN is congruent to TR.

X = 6.3

Step-by-step explanation:

MNK is congruent to TRP because the two triangles are congruent, which is a given statement. This also means that all side and angle measures will be congruent. Because of this, it can be inferred that MN is congruent to TR and they have equal side length measures. This means that TR measures 20. This means that 3X - 1 = 20. By solving we can get 6.33.

Answer:

$11.29

Step-by-step explanation:

He had $30 at the start, to see how much he has left we first need to calculate how much money he has spent throughout the fair:

$5 + $6.50 + $7.21 = $18.71

$30.00 - $18.71 = $11.29

Answer:

sf=3

Step-by-step explanation:

the green shape is 3 times the size of the red shape

Answer:

Your answer of 10 x 12 - 14 +2+15 =123

The constant G is a fundamental constant in physics and plays a crucial role in understanding the gravitational interactions between celestial bodies.[tex]A.d is N.m^2/kg^2.[/tex]

Conversions:

10 meters to feet: 10 meters * 3.281 feet/meter = 32.81 feet

100 kilograms to pounds: 100 kilograms * 2.2046 pounds/kilogram = 220.46 pounds

50 Kelvin to Rankine: 50 Kelvin * (9/5) Rankine/Kelvin = 90 Rankine

6 micrometers to centimeters: 6 micrometers * 0.0001 centimeters/micrometer = 0.0006 centimeters

The unit of the constant G in the formula F.L.G = [tex]A.d is N.m^2/kg^2.[/tex]

In the given formula, F represents force in Newtons (N), L represents length in meters (m), G represents the constant with the unit of [tex]N.m^2/kg^2[/tex], A represents area in square meters ([tex]m^2[/tex]), and d represents distance in meters (m).

The unit [tex]N.m^2/kg^2[/tex] represents the gravitational constant in physics, commonly denoted as G. It is used in the calculation of gravitational forces between objects. The unit can be broken down as follows: N represents the unit of force, [tex]m^2[/tex]represents the unit of area, and[tex]kg^2[/tex]represents the square of the unit of mass. The constant G is a fundamental constant in physics and plays a crucial role in understanding the gravitational interactions between celestial bodies.

Learn more about kilograms here:

https://brainly.com/question/29761698

#SPJ11

Answer:

The midpoint would be (1,5).

Answer:I think it’s 16 because 4x4=16

Step-by-step explanation: :D