When table salt is added to water, a solution is created that has a greater boiling point than just plain water.
How does the boiling point of a solution compared to the pure solvent?Because the solution (which has a lower vapour pressure) must be heated to a higher temperature in order for the vapour pressure to match the external pressure, the boiling point of a solution will thus be higher than the boiling point of the pure solvent (i.e., the boiling point).The polar substance always has the higher boiling point, which denotes stronger attraction forces, or stronger intermolecular forces, between individual molecules. Because freezing or solidification promotes order and reduces entropy, solutions have lower freezing points than pure solvents or solutes.
To know more about solidification visit:
https://brainly.com/question/21278640
#SPJ1
Answer: The answer is 0.5 M AIN
Explanation:
determine the quantum numbers for the outermost three electrons for an atom of aluminum starting with the innermost electron of the three.
Set of quantum numbers (n,l,m,s) for the outer most shell of aluminum atom is (3,1,-1,+1/2)
Given outermost electron of aluminium,
The electronic configuration of aluminium is 1s², 2s², 2p⁶,3s², 3p¹
The outermost electron will have the configuration 3p¹;
3p¹ ⇒ n = 3, l = 1 (p), ml = -1 (px orbital), s = +1/2;
Therefore we know that the,
⇒ Set of quantum numbers = (3, 1, -1, +1/2)
and as we know the value of m lies between -l and +l
As we know, therefore we get the values of,
n = 3,
l = 1,
m = -1 and
s = +1/2
To learn more about quantum numbers, click here:
brainly.com/question/16977590
#SPJ4
different substances have different ____________ , or abilities to reflect light.
A substance's "optical characteristics," or capacity to reflect light, vary depending on the substance. Due to the fact that a substance's chemical and physical characteristics affect how light interacts with it.
Some light that strikes a surface may be absorbed by it, while the rest may be reflected back. The optical characteristics of a material, which are influenced by its chemical and physical structure, govern how well it can reflect light. Varied materials have varying reflectivity and absorbance spectra, which describe how much light is reflected or absorbed at various wavelengths, as well as different indices of refraction, which explain how much light is bent when it travels through the material. These characteristics are crucial for a variety of applications, including the development of optical coatings and lenses as well as spectroscopy-based material composition analysis.
Learn more about "reflect light." here:
https://brainly.com/question/22015933
#SPJ4
If 200g of CH3OH is used in a combustion process. How many grams of water can be produced?
224.7 grams of water can be produced by the combustion of 200 grams of CH3OH.
What is combustion?
Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, usually oxygen, which results in the release of energy in the form of heat and light. During combustion, the fuel is oxidized (i.e., loses electrons) and the oxidizing agent is reduced (i.e., gains electrons). This reaction is often accompanied by the production of other products, such as water and carbon dioxide.
The balanced chemical equation for the combustion of CH3OH is:
2 CH3OH + 3 O2 → 2 CO2 + 4 H2O
From the balanced equation, we can see that 2 moles of CH3OH react with 4 moles of H2O. Therefore, we can use the molar mass of CH3OH to calculate the number of moles of CH3OH, and then use the stoichiometric ratio to calculate the number of moles of H2O produced. Finally, we can convert the moles of H2O to grams using the molar mass of water.
Step 1: Calculate the number of moles of CH3OH.
molar mass of CH3OH = 12.01 g/mol (C) + 4(1.01 g/mol) (H) + 16.00 g/mol (O) = 32.04 g/mol
moles of CH3OH = mass / molar mass = 200 g / 32.04 g/mol = 6.237 mol
Step 2: Calculate the number of moles of H2O produced.
From the balanced equation, we need 4 moles of H2O for every 2 moles of CH3OH.
moles of H2O = 4 x moles of CH3OH / 2 = 4 x 6.237 mol / 2 = 12.474 mol
Step 3: Calculate the mass of H2O produced.
molar mass of H2O = 2(1.01 g/mol) + 16.00 g/mol = 18.02 g/mol
mass of H2O = moles of H2O x molar mass of H2O = 12.474 mol x 18.02 g/mol = 224.7 g
Therefore, 224.7 grams of water can be produced by the combustion of 200 grams of CH3OH.
To learn more about combustion:
https://brainly.com/question/12172040
#SPJ1
What piece of equipment is used for measuring exact volumes of liquid?
It is typical to measure liquid volume using both a graduated cylinder and a buret. As the name implies, a graded cylinder is a cylindrical glass or plastic tube that is sealed at one end and has a calibrated scale inscribed on the outside.
A measuring cylinder, often referred to as a graded cylinder, a measuring cylinder, or a mixing cylinder, is a piece of lab apparatus used to gauge the quantity of fluids, chemicals, or solutions used during a typical lab session. Graduated cylinders are more precise and accurate than traditional laboratory flasks and beakers. The scale on a 50-mL buret is in increments of 0.1 mL. A buret's liquid level is measured and recorded to the nearest 0.01 mL in order to prevent any inaccuracies. The volume of the liquid can be calculated using a measuring flask, pipette, and measuring cylinder.
Learn more about graduated cylinders here:
https://brainly.com/question/14427988
#SPJ4
a tiny amount of magnesium chloride contains 150 magnesium ions and 300 chloride ions. the correct formula for magnesium chloride is
The correct answer is the correct formula for Magnesium Chloride is MgCl2
An inorganic compound with the chemical formula MgCl2 is magnesium chloride. It generates MgCl2nH2O hydrates, where n can range in value from 1 to 12. These salts are white or colorless solids that are very soluble in water. These chemicals can be found in nature in both their compounds and solutions, and they have a wide range of practical uses. Anhydrous magnesium chloride serves as the primary precursor for the widely produced magnesium metal. Magnesium chloride that has been hydrated is the form that is most readily available. Magnesium chloride may be extracted using brine or saltwater. The Great Salt Lake in North America provides the bulk of the brine used to make it. It is utilized in the Jordan Valley and is from the Dead Sea. The mineral bischofite (MgCl26H2O) is extracted by solution mining from ancient seabeds like the Zechstein seabed in northwest Europe. Some deposits are a result of the high magnesium chloride content of the primordial ocean. Saltwater evaporation causes a little quantity of magnesium chloride to be created.
To learn more about MgCl2 click the link below
brainly.com/question/14715143
#SPJ4
Which amino acid is most likely to participate in hydrogen bonding with water? To answer this you will need to look at the R-groups (.e. side chains) of each the amino acids. Use can use the slide in the lecture notes or go to Fig. 4.2 (Structures of the 20 amino acids) found in the text book. a. asparagine b. leucine c. valine d. alanine e. phenyilanine
Asparagine is an amino acid that is most likely to participate in hydrogen bonding with water due to the presence of a polar, hydrophilic side chain ( -CONH2). The other amino acids listed are nonpolar and hydrophobic.
The Role of Asparagine in Hydrogen Bonding with WaterAsparagine is an amino acid that contains a polar, hydrophilic amide side chain (-CONH2), making it the most likely amino acid to participate in hydrogen bonding with water. Hydrogen bonding occurs between the partially positive hydrogen atoms of water and the partially negative oxygen or nitrogen atoms of asparagine. The polar nature of the asparagine side chain allows it to interact with the polar water molecules, forming hydrogen bonds that help to stabilize the protein structure. This is particularly important in proteins that are located on the surface of cells or in extracellular spaces, as these regions are often exposed to water and require stable structures to maintain their function. In contrast, amino acids such as leucine, valine, alanine, and phenylalanine have nonpolar, hydrophobic side chains that do not participate in hydrogen bonding with water. These hydrophobic amino acids are more likely to be found in the interior of proteins, where they can interact with other nonpolar amino acids and help to stabilize the protein structure through hydrophobic interactions.
To know more about amino acids, visit:https://brainly.com/question/15687833
#SPJ4
When 127.68 g of brass at 163 °C are added to 150.00 g H₂O at 22.4 °C, the final
temperature
for brass.
of the brass and water is 32.6 °C. Calculate the value of the specific heat, c,
For water: q = cmΔT = 4.18 ∙ 150 (32.6 – 22.4) = 6395.4J
For brass: c = q / mΔT = 6395 / 127.68 (163 – 32.6) = 0.384 J / gC
What is water?
The global economy depends heavily on water. Agriculture uses over 70% of the freshwater that people use. 6.5% of the world's protein comes from fishing in salt and fresh water bodies, which has been and still is an important source of food for many regions of the world. Commodities (including oil, natural gas, and manufactured goods) are frequently transported across vast distances by boats over the oceans, rivers, lakes, and canals. In both industry and residences, huge amounts of water, ice, and steam are utilised for cooling and heating. Water is utilised extensively in industrial processes, as well as in cooking and washing, as it is a great solvent for a wide range of compounds, both mineral and organic.To know more about water, click the link given below:
https://brainly.com/question/28465561
#SPJ1
the initial concentration of ab is 0.160 m , and the reaction mixture initially contains no products, what are the concentrations of a and b after 71 s ?
If a 3.0g sample of ground water contains 1.1 x 10^-5g of arsenic(As), what is the concentration of As in ppm?
The concentration of arsenic in the groundwater sample is 36.67 ppm.
What is arsenic?Arsenic is a chemical element with the symbol As and atomic number 33. It is a metalloid, meaning it has properties of both metals and nonmetals. Arsenic is commonly found in the earth's crust and is present in various minerals and rocks.
The concentration of arsenic in the groundwater sample can be expressed in parts per million (ppm) as follows:
ppm = (mass of arsenic/mass of water sample) x[tex]10^6[/tex]
The mass of the water sample is 3.0g, so the mass of arsenic is 1.1 x [tex]10^-5g.[/tex]
ppm =[tex](1.1 x 10^-5g / 3.0g) x 10^6[/tex]
ppm [tex]= (0.00011 / 3) x 10^6[/tex]
ppm = 36.67
Therefore, the concentration of arsenic in the groundwater sample is 36.67 ppm.
To learn more about arsenic visit:
brainly.com/question/13874165
#SPJ1
What is the concentration of N2(g), in
parts per billion, in a solution that
contains 1.5 * 10 ^ - 6 g of N2(g) dissolved
in 7.5 g of H2O(l)?
Can someone tell me why 200 is the right answer?
Answer:
The concentration of N2(g) in parts per billion (ppb) in a solution can be calculated as follows:
(mass of N2(g) in solution / total mass of solution) * 10^9 ppb
Plugging in the given values, we have:
(1.5 * 10^-6 g / (7.5 g + 1.5 * 10^-6 g)) * 10^9 ppb = (1.5 * 10^-6 g / 7.5 g) * 10^9 ppb = 200 ppb
So, the concentration of N2(g) in the solution is 200 ppb.
how does water never fall off the earth? this is for science
Water (and everything else) stays on Earth due to the combination of gravity and atmospheric pressure.
What is Atmosphericc Pressure?
Atmospheric pressure is the force exerted by the weight of the Earth's atmosphere on the surface below it. The Earth's atmosphere is composed of a mixture of gases, primarily nitrogen (78%) and oxygen (21%), along with other trace gases. These gases have mass and are attracted towards the center of the Earth by the force of gravity.
The pressure of the atmosphere decreases with increasing altitude because there is less atmosphere above, meaning that there is less weight and therefore less force pressing down. At sea level, the average atmospheric pressure is around 101.3 kilopascals (kPa) or 14.7 pounds per square inch (psi). This pressure can be measured with devices such as barometers.
Water on Earth does not fall off into space due to the force of gravity. Gravity is the force that attracts objects towards each other. The Earth's gravity is what keeps everything on the planet, including water, from floating away into space. As long as an object is within the Earth's gravitational field, it will be attracted towards the center of the planet.
Furthermore, the Earth's atmosphere also helps to keep water from falling off the planet. The atmosphere creates a layer of air around the Earth, which creates pressure that holds water molecules in place. This pressure is also caused by gravity, as the weight of the atmosphere presses down on everything below it, including water.
In summary, water (and everything else) stays on Earth due to the combination of gravity and atmospheric pressure.
Learn more about Atmosphericc Pressure from given link
https://brainly.com/question/19587559
#SPJ1
QuestionWhen hydrogen and oxygen combine to form water, they form:Aan unstable compoundBa stable mixtureCan unstable mixtureDan extremely stable compoundMedium
When hydrogen and oxygen combine to form water,they form d)stable compound.So,correct option is d.
At the point when hydrogen and oxygen combine to form water, they structure water an incredibly steady compound. We can say water is a steady compound on the grounds that huge energy is delivered is a sign that breaking water particles into the first components is extremely hard.
2H₂ + O₂=2H₂O
Water is an inorganic compound with the chemical equation H₂O It is a straightforward, bland, unscented, and almost drab synthetic substance, which is the fundamental constituent of Earth's hydrosphere and the liquids of all known living life forms (in which it goes about as a solvent).
It is essential for all known types of life, regardless of not giving food, energy or natural micronutrients. Its compound equation, H₂O, shows that every one of its particles contains one oxygen and two hydrogen molecules, associated by covalent bonds. The hydrogen particles are connected to the oxygen iota at a point of 104.45°. "Water" is additionally the name of the fluid province of H₂O at standard temperature and strain.
To know more about water,visit here:
https://brainly.com/question/19920929
#SPJ4
(Complete question) is:
When hydrogen and oxygen combine to form water, they form:
a)an unstable compound
b)a stable mixture
c)an unstable mixture
d)an extremely stable compound
explain why the can behave as it does. as long as the water is heated gently, no condensed water vapor is visible as steam exits the can.
When water is heated in a closed container, such as a can, the pressure inside the container increases as the water vaporizes into steam.
The pressure inside the can builds up until it reaches a point where it is high enough to overcome the pressure of the surrounding air, at which point the steam is able to escape through a small opening.
This can cause the steam to expand rapidly and violently, which can lead to the can exploding or bursting open. the warm, moist air from your lungs condenses into visible water vapor when it comes into contact with the colder air outside.
In contrast, if the water in the can is heated too quickly or to a very high temperature, the pressure inside the can can become so high that the steam that escapes is very hot and under high pressure. This is why it's important to be cautious when heating water in a closed container, and to avoid heating it too quickly or to too high a temperature.
To learn more about steam:
https://brainly.com/question/15447025
#SPJ4
the ph of a certain weak acid solution with a concentration of 0.150 m is 2.535. what is the ka for this acid?
The Ka for the weak acid is 9.14 x 10^(-6).
Weak acid isA weak acid is an acid that only partially dissociates in water, and its strength is described by its acid dissociation constant (Ka).
To determine the Ka for the weak acid, we can use the relationship between the Ka and the pH of the solution:
Ka = 10^(-pH) * [HA]/[A-]
where [HA] is the concentration of the undissociated weak acid and [A-] is the concentration of the conjugate base.
From the given information, we know that the pH of the solution is 2.535. This means that:
[H+] = 10^(-pH) = 10^(-2.535) = 3.62 x 10^(-3) M
Since the acid is weak, we can assume that the concentration of the undissociated weak acid ([HA]) is approximately equal to the initial concentration of the acid (0.150 M).
Next, we can use the equation for the dissociation of the weak acid:
HA + H2O ⇌ H3O+ + A-
to write an expression for the equilibrium constant (Ka):
Ka = [H3O+][A-]/[HA]
We can use the fact that the solution is electrically neutral to write:
[H3O+] = [A-] + [OH-]
where [OH-] is the concentration of hydroxide ions.
Since the acid is weak, we can assume that the concentration of hydroxide ions is much smaller than the concentration of hydronium ions, so we can approximate:
[H3O+] ≈ [A-]
Substituting these expressions into the equation for Ka, we get:
Ka = [H3O+]^2 / [HA]
Plugging in the values we have calculated, we get:
Ka = (3.62 x 10^(-3))^2 / 0.150
Ka = 9.14 x 10^(-6)
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ1
water is a polar compound that will commonly add to aldehydes. what is the product of an addition reaction between butanal,
The product of the addition reaction between butanal, CH3-CH2-CH2-CHO, and water is an alcohol, CH3-CH2-CH2-CH(OH)-H, known as butan-1-ol.
This reaction takes place when the slightly positive oxygen atom of the water molecule interacts with the slightly negative carbonyl carbon of the butanal molecule, forming a new covalent bond. This is known as a nucleophilic addition reaction, and the overall equation is shown below:
CH3-CH2-CH2-CHO + H2O → CH3-CH2-CH2-CH(OH)-H + H3O+
This reaction is called a hydration reaction and is a type of nucleophilic addition reaction. The hydroxide ion acts as a nucleophile, donating its electrons to the partially positive carbon of the aldehyde, and displacing the proton. This forms an oxonium ion, which then undergoes a proton transfer with another water molecule, forming the alcohol product.
learn more about covalent bond Refer:brainly.com/question/19382448
#SPJ4
comlete question:water is a polar compound that will commonly add to aldehydes. what is the product of an addition reaction between butanal,CH3-CH2-CH2-CHO and water
5
19. Soil can be
conserved by removing
trees.
A. True
B. False
Soil can be conserved by removing trees. This statement is false.
What is soil conservation ?Soil conservation is a set of practices used to keep soil from deteriorating. To begin with, soil conservation entails treating the soil as a living ecosystem. This entails continuously returning organic matter to the soil. Preventive maintenance on a car is analogous to soil conservation.
Organic or ecological farming entails reducing or eliminating the use of synthetic fertilizers and pesticides, as well as cultivating rich, long-term balanced soil fertility through techniques such as crop rotation, conservation tillage, and soil amendments such as compost and manure.
Thus, Soil can be conserved by removing trees. This statement is false.
To learn more about the soil conservation, follow the link;
https://brainly.com/question/30333660
#SPJ1
ill in the missing information: symbol atom or ion? check all that apply number of protons number of electrons neutral atom cation anion neutral atom cation anion neutral atom cation anion
Number of protons number of electrons neutral atom cation anion neutral atom cation anion neutral atom cation anion number of proton is 7 So, atomic number is 7 atomic number is 7 for N charge.
Number of proton is 7 So, atomic number is 7 atomic number is 7 for N charge = number of proton - number of electron = 7 - 10 = -3 So, this is anion A .
Protons are the positively charged particles that are inside the nucleus of an atom. The protons are pushed apart by the electromagnetic force but pulled together by the strong force, which is stronger over short distances .
Cations are positively-charged ions (atoms or groups of atoms that have more protons than electrons due to having lost one or more electrons). Anions are negatively-charged ions (meaning they have more electrons than protons due to having gained one or more electrons).
The number of neutrons is equal to the difference between the mass number of the atom (M) and the atomic number (Z).
Electron, proton, neutron are subatomic particles which build the atom. The atom consists of a central nucleus containing neutron and proton. Electrons revolve around the nucleus. Electrons are negatively charged, proton is positively charged and neutron is neutral.
Learn more about protons here:-
brainly.com/question/1252435
#SPJ4
an employment situation that pays bills but os largley unfluffing is?
Observe the minerals. Describe the mineral's colour, luster (shiny or dull) and the way they break apart (cleavage or fracture) in the student guide
The mineral Calcite has a pale yellow color with a dull luster. It has no visible cleavage.
It appears to have a conchoidal fracture, where the pieces break apart with curved edges.Calcite is a very common mineral composed of calcium carbonate (CaCO3). It is the primary mineral in many metamorphic and sedimentary rocks, and is a major component of limestone and marble. Calcite has a hardness of 3 on the Mohs scale, which makes it suitable for use in jewelry and ornaments. Calcite occurs in a variety of colors, including white, yellow, orange, pink, blue, and green. It is also the main component of many chalk deposits. Calcite is used in many industrial processes and products, including as a filler in cement, as a neutralizing agent in soil, and as a flux in steelmaking. It is also used as a source of calcium in animal feed and as a food additive.
learn more about Calcite Refer:brainly.com/question/11737819
#SPJ4
complete question:Observe the minerals Calcite. Describe the mineral's colour, luster (shiny or dull) and the way they break apart (cleavage or fracture) in the student guide
Describe 3 ways students dispose of garbage at your school
Answer:
Make Recycle Bins Easily Accessible
Ditch Single-Use Waste
Minimise Paper Waste
Designate a Drawer for Scrap Paper
Eco-Friendly Lunches
2. Explain why the drop of water on the wax paper is "very round" in comparison to the drop on the glass is more flat use the term either hydrophobic or hydrophilic
The water droplet on wax paper is round and flat on a glass surface, this is because of the hydrophobic and hydrophilic properties of water.
The water drop on wax paper is very round in comparison to the one on a glass which is flatter, this indicates the property of cohesion of water molecules, this is due to gravity.
On the other hand, when the water droplet is on wax paper it is way rounder in shape and attracted to the wax paper called as adhesion.
Hydrophobic literally means "fear of water."
In chemistry, it could be said it's the physical property of molecules that are repelled from a mass of water. This is the case with wax paper where its can't get absorbed or fail to mix and rather tend to repel.
Hydrophile is basically opposite of hydrophobic which is the molecules attracted to water. A hydrophile is a molecule or other molecular entity that is attracted to water molecules and tends to be dissolved by water.
To learn more about Hydrophobic properties, click here:
brainly.com/question/13378292
#SPJ4
If you save $200 a month, how many months until you can purchase the car?
It will take 50 months to save enough money to buy the car. Always remember that the actual time may be longer if other factors such as taxes, fees, interest rates, and etc. are considered.
The time it takes to save enough money to buy a car can be determined by the cost of the car and the amount that saved each month for the car . If you the cost of car that you decided to buy , you can divide it by the amount saved each month to calculate the number of months required to save enough money.
For example, if a car costs $10,000 and you decide to save $200 per month, you would need to save for:
time = cost ÷ savings per month
time = $10,000 ÷ $200 per month
time = 50 months
As a result, it will take 50 months to save enough money to buy the car. However, always remember that the actual time may be longer if other factors such as taxes, fees, interest rates, and etc. are considered.
To learn more about savings.
https://brainly.com/question/30004719
#SPJ4
After the correct formula for a reactant in an equation has been written, the
subscripts are adjusted to balance the equation.
formula should not be changed.
same formula must appear as the product.
symbols in the formula must not appear on the product side of the equation.
The correct formula for a reactant in an equation shouldn't be modified once it has been written.
Subscript refers to the small number at the bottom of the symbol. The amount of the element's atoms in the molecule is shown on the right side of the number. A solitary symbol's atomic number is displayed as a subscript in the bottom left corner. Once the right formula for a reactant has been written, the equation's subscripts are adjusted to make it equal. The chemical formulas of the reactants and products, in part, show how many atoms are present in each element.
Learn more about element's here:
https://brainly.com/question/14347616
#SPJ4
what is the average reaction rate between 0. and 1500. s ? express your answer to three significant figures and include the appropriate units.
Between 0 and 1500, the average reaction rate is 0.000112 M/s, or 7.14*[tex]10^{-5}[/tex]Instantaneous rate is thus 7.25*[tex]10^{-5}[/tex] M/s..
How do you mean by response?Resistance or antagonism to a force, action, or movement is a reactionary act, process, or occurrence. especially: a reaction to a particular treatment, circumstance, or stimulus; leaning toward a past and typically antiquated political or social system or policy. She was shocked by the information.
How can you format an example of a reaction?The paper ought to include a synopsis of the source material, but the major emphasis should be on your opinions and justifications regarding the topics included in the actual text. This necessitates your consideration of the provided work, followed by a targeted, well-thought-out response supported by outside sources, when appropriate.
Part A:
At t = 0 s , [A] = 0.184 M
At t = 1500 s , [A] = 0.016 M
Average rate = \Delta[A] / \Deltat
= (0.016 - 0.184) / (1500 - 0)
= - 0.168 / 1500
= - 0.000112 M/s
Hence average rate = 1.12*[tex]10^{-4}[/tex] M/s
Part B:
At t = 500 s , [A] = 0.069 M
At t = 1200 s , [A] = 0.019 M
Average rate = (0.019 - 0.069) / (1200 - 500)
= - 0.05 / 700
= - 7.14*[tex]10^{-5}[/tex] M/s
Hence average rate = 7.14*[tex]10^{-5}[/tex] M/s
Part C:
0.20 0.18 0.16 0.14 0.12 Z 0.10 0.08 0.06 0.04 0.02 0 200 400 600 800 1000 1200 1400 1600 Time (s)
Now, we have:
At t = 600s ; [A] = 0.043 M
At t = 1000s ; [A] = 0.014 M
Instantaneous rate = slope of tangent at t = 800s
= d[A] / dt
= (0.014 - 0.043) / (1000 - 600)
= - 0.029 / 400
= - 0.0000725 M/s
Hence instantaneous rate = 7.25*[tex]10^{-5}[/tex] M/s
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ1
what is the rentention factor if the distance traveled by the solvent front is 2.0 cm and the distance th ion is from the solvent fron is 0.20 cm
The retention factor is 0.9 if the solvent front travels a distance of 2.0 cm and the distance between the particle and the solvent front is 0.20 cm.
In a chromatography experiment, the retention factor, also referred to as the Rf value, is a measurement of how far a component moves in relation to the solvent front. It is computed as the ratio of the compound's (also known as the "spot") travel distance to the solvent front's travel distance:
Distance travelled by the spot divided by the distance travelled by the solvent front is the retention factor (Rf).
In your situation, the solvent front moved 2.0 cm, and the ion and solvent front were separated by 0.20 cm. because of this, the distance covered by the
Spot's the ion's distance travelled is calculated as follows: Spot's (the ion's) distance travelled = Spot's (the solvent front's) distance travelled - Spot's (the ion's and the solvent front's) distance apart from each other Spot's (the ion's) distance travelled = 1.8 cm
Now that we know how to compute retention factor:
Rf is the product of the spot's travel distance and the solvent front's travel distance.
Rf = 1.8/2.0 cm.
Rf = 0.9
As a result, this experiment's retention factor is 0.9.
learn more about solvent here:
https://brainly.com/question/30452436
#SPJ4
By titration, 15 mL of aqueous H₂SO4 neu-
tralized 25.6 mL of 0.0193 M LiOH solution.
What was the molarity of the aqueous acid
solution?
Answer in units of M.
The concentration of the acid is 0.016 M
What is neutralization reaction?A neutralization reaction is a chemical reaction in which an acid and a base react to form a salt and water. The reaction occurs when the hydrogen ions (H+) from the acid react with the hydroxide ions (OH-) from the base to form water (H2O). The salt that forms depends on the specific acid and base that are reacted.
Using;
CAVA/CBVB = NA/NB
CA = concentration of acid
CB = concentration of base
VA = volume of acid
VB = Volume of base
Then;
CAVANB = CBVBNA
CA = CBVBNA/VANB
CA = 0.0193 M * 25.6 mL * 1/15 mL * 2
CA = 0.016 M
Learn more about neutralization:https://brainly.com/question/27891712
#SPJ1
What would be the theoretical yield in moles for CO2 when there is 63.2 amount of moles of 02 present?
C+02->602
The theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.
Describe Chemical Reaction?A chemical reaction is a process in which one or more substances, called reactants, are converted into one or more different substances, called products. This process involves the breaking and forming of chemical bonds between atoms and/or molecules, resulting in a change in the chemical composition of the substances involved.
Chemical reactions can be classified into several different types based on the changes that occur during the reaction, including:
Synthesis or combination reactions: where two or more reactants combine to form a single product.
Decomposition reactions: where a single reactant breaks down into two or more products.
Single replacement or displacement reactions: where one element replaces another element in a compound, resulting in the formation of a new compound.
Double replacement or displacement reactions: where two compounds exchange ions or atoms to form two new compounds.
Acid-base reactions: where an acid and a base react to form a salt and water.
Assuming that the balanced chemical equation is:
C + O2 → CO2
We can see that the stoichiometric ratio between O2 and CO2 is 1:1. This means that for every 1 mole of O2 consumed, 1 mole of CO2 is produced. Therefore, if there are 63.2 moles of O2 present, the theoretical yield of CO2 would also be 63.2 moles.
So, the theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.
To know more about moles visit:
https://brainly.com/question/15209553
#SPJ1
A chemical equation is a statement using chemical __ that express both the identities and the relative __ of the reactants and products involved in a chemical or physical change
Answer:
the answer is here
Explanation:
write the formula based on the name, or the name based on the formula, for each hydrocarbon. a. propane. b. ch3ch2ch3. c. octane. d. ch3ch2ch2ch2ch3
For each hydrocarbon, the formula based on the name or the name based on the formula. a) Propane C3H8. b) Propane CH3CH2CH3. c) Octane C8H18. d) Pentane CH3CH2CH2CH2CH3
In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons are examples of group 14 hydrides. Hydrocarbons are generally colourless and hydrophobic; their odor is usually faint, and may be similar to that of gasoline or lighter fluid. They occur in a diverse range of molecular structures and phases: they can be gases (such as methane and propane), liquids (such as hexane and benzene), low melting solids (such as paraffin wax and naphthalene) or polymers (such as polyethylene and polystyrene).
In the fossil fuel industries, hydrocarbon refers to naturally occurring petroleum, natural gas and coal, or their hydrocarbon derivatives and purified forms. Combustion of hydrocarbons is the main source of the world's energy. Petroleum is the dominant raw-material source for organic commodity chemicals such as solvents and polymers. Most anthropogenic (human-generated) emissions of greenhouse gases are either carbon dioxide released by the burning of fossil fuels, or methane released from the handling of natural gas or from agriculture.
For such more questions on Hydrocarbons
https://brainly.com/question/1489747
#SPJ4
the nitrogen bases are held together in the center of the molecule by____
Answer:Hydrogen Bonds
Explanation:
