Which statement describes an enterprise platform? a. It is a framework that connects people. processes. and other technologies together to deliver on a O strategic business goal. b. It is a technology that directly connects a supplier with the consumer to complete a task or achieve a goal. c. It is a platform that helps people connect and share content with colleagues and friends for social and business purposes. d. It is a platform that directly connects a supplier with a consumer through a social networking interface to complete endâtoâend business. e. I don't know this yet.

Consider the following method header for the Employee class. Public Sector Salary Increase (Multiple Factor) { }. The method body contains: Salary = salary * (1 + salary increase percentage).

This will read the input at run time and then perform the same computation. Assuming Amount=Percentage*Gross Salary/100, the following formula is used: This is a simple arithmetic calculation that will give you the desired result i.e. net salary or salary on hand.

Net Salary = GS Income Tax Algorithm: Start. Takes user input as employee name, id and basic salary. Calculate the above parameters DA, HRA, GS, Income Tax, Net Salary. View the output. stop.

To learn more about public void visit:

https://brainly.com/question/14963997

#SPJ4

True. S waves, also known as secondary waves or shear waves, are a type of seismic wave that can cause significant damage to buildings and other structures.

Unlike P waves, which are compressional waves that move in a back-and-forth motion, S waves move the ground up and down and side to side, which can cause significant shaking and displacement of the ground surface.

This can cause buildings to collapse or suffer other types of damage, particularly during strong earthquakes.

For this reason, it is important for buildings to be designed and constructed to withstand the shaking caused by S waves.

To Know More About P waves, Check Out

https://brainly.com/question/29334933

#SPJ4

Therefore, the reaction at support A is 2100 N and the support reaction at  B is 1950 N.

Calculate the point load due to uniform varying load in section AC i.e. W1

W1=AC*(600N/m)

=3m*(600N/m)

=1800N

Calculate the point load due to uniform varying load in section AC i.e. W2.

W2=1/2*AC*(900-600n/M)

=450N

Calculate the point load due to uniformly distributed load in section CB i.e. W.

W=CB*(600N/m)

w=1800N

Use the condition of force equilibrium in the vertical direction.

W1+AP+W2*AQ+W*AR-Rb*AB=0

2700N.m+900N.m+8100N.m-Rb*6m=0

Rb=1950N

Ra+1950N=4050N

Ra=4050N-1950N

support reaction  is Ra=2100N

Learn more about support reaction here:

https://brainly.com/question/19260256

#SPJ4

You may choose which is more likely to crystallize, yes. The copolymer made of alternating styrene and ethylene is more likely to solidify.

Compared to random poly, alternating poly (styrene-ethylene) copolymer crystallizes more easily (vinyl-chloride-tetrafluoroethylene). Because large polymer chains are prone to get more twisted, relatively small polymer chains crystallize more easily than long chains. A material with higher crystallinity is typically stronger, while low molecular weight polymers typically have lower strengths despite having higher crystallinity. Compared to branched polymers, linear polymers are more prone to crystallize. The degree of crystallinity of polymers with isotactic structures will often be higher than that of polymers with atactic structures. The tensile modulus of a polymer rises with increasing crystallinity.

Learn more about tensile here-

https://brainly.com/question/13260444

#SPJ4

For simple exit from a secure area, turnstiles are frequently employed.

A mantrap is a little space with an exit door on the other wall and an entrance door on one wall. A mantrap door cannot be opened until the door to its opposite has been shut and locked.

Hardware, software, and cloud services are the three parts of network security. Servers or other devices known as hardware appliances carry out specific security operations in a networking environment.

To know more about mantrap visit:-

https://brainly.com/question/29412056

#SPJ4

from a known hydrograph upstream; as the hydrograph moves. hydrograph at a place on a watershed.

To learn more about hydrological outflow refer to:

https://brainly.com/question/17922947

#SPJ4

We should Disconnect the access point from the network to protect your network while still preserving evidence.

In information technology, a network is described as the cabled or wireless connection between at least two computer systems. The simplest network is made up of two computers connected by a cable. This kind of network is known as a peer-to-peer network.

There is no hierarchy in this network; each participant has equal privileges. Each computer can access the data on the other machine and share resources like disk space, software, or peripherals.

Modern networks are more complicated and do not only have two computers in them. Typically, client-server networks are used in systems with more than ten users. In these networks, the other users are given resources by a central computer (server).

Learn more about network

https://brainly.com/question/20535662

#SPJ4

A second-order high-pass filter has a low-end roll-off of 40DB/decade

What is a high-pass filter?

An easy-to-use, efficient EQ curve that removes undesired low frequencies from any audio source is a high pass filter. When properly applied, they are wonderful for cleaning up errant signals and tightening up arrangements. They can create more issues than they can resolve if used improperly.

Cutoff frequency is the point in the frequency response of the filter where the gain is equal to 50% of the peak gain of the signal. 3dB of the peak gain, to be exact. In a high pass filter, frequency increases cause an increase in gain.A low-end roll-off 40DP/decade is for second-order high-pass filter

Hence to conclude high-pass filter has a roll-off of 40DB/decade

To know more on high-pass filter follow this link:

https://brainly.com/question/16983262

#SPJ4

Power-driven vessels that are less than 12 meters in length are allowed to display an all-around white light in place of the masthead light and sternlight, but when they are 7 meters or longer, they are compelled to display sidelights.

Power-driven vessels in motion must have a stern light, sidelights, and a masthead light. Ships under 12 meters in length may have side lights and an all-around white light.

A ship at anchor must display the following information where it can be seen: I a single ball or an all-white light in the front section; (ii) at the stern or close by, and a degree of white light that is lower than the one described in subparagraph.

To know more about vessels visit:-

https://brainly.com/question/14396490

#SPJ4

Every complete statement ends with semi-colon.

Java statements, like declaration and string statements, are instructions that inform the computer language what to do. Basic statements establish variables and begin the execution of Java methods or blocks of other statements. Variables are assigned values using assignment statements. Statements include variable declarations and assignments, such as those in the preceding section, as well as basic language constructs like conditionals and loops. Expressions define values; an expression is evaluated to generate a result, which may then be utilized in another expression or a statement.

To know more about statement,

https://brainly.com/question/15224005

#SPJ4

The answers to the methods of deep copies, Enum and communication implementation is given below.

When copying an object in Java, there are two options that should be taken into account: shallow copy and deep copy. When we merely copy field values and the copy depends on the original object, we utilise a shallow copy. same, references to any fields that contain objects are transferred but not the actual objects themselves. Make sure that all three objects are thoroughly copied in order to prevent the copy from depending on an earlier object that may change in the future. When we attempt to generate an object duplicate, all fields from the original object are precisely reproduced in the deep copy. and if it contains fields that are objects, a copy of those fields is made using the clone function (). The original and duplicated objects refer to distinct objects when you conduct a deep copy on an object that contains an object, and if you make changes to the data, the copied objects do not reflect those changes in the original objects.

Enum is a sort of data type that programmers can use to construct their own data types —

A particular data type called an enum allows variables to be configured using predefined constants. and the variable should equal one of the predefined values for it. For instance, the compass's orientation (values of NORTH, SOUTH, EAST, and WEST) and the day of the weekAdditionally, the names of the fields on an enum type are all capitalised because they are constant. and the "enum" keyword can be used to define an enum type in java programming. For instance, we can provide the public enum type for the days of the week. Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday are the days.

The SFSU University Police Department has begun sending out live updates when there are occurrences occurring on campus. Because all field values and copies in shallow copies are dependent on the original objects, this communication can be implemented using this manner.

To know more about deep copies refer:

https://brainly.com/question/13784099

#SPJ4

Answer:

true.

Explanation:

In Hawaii, the court system is divided into three levels: the trial courts, the intermediate appellate courts, and the supreme court. The trial courts, which include the district courts and the circuit courts, are the first level of the judicial system and are responsible for hearing and deciding cases involving criminal and civil matters.

If an individual who has been convicted of assault and battery in a trial court in Hawaii wishes to challenge the decision, they may file an appeal with the intermediate appellate court. This court will review the decision of the trial court and consider any arguments or evidence presented by the appellant in support of their appeal. If the appellant is still dissatisfied with the outcome, they may then appeal to the supreme court, which is the highest court in the state.

The first step in determining traffic demand for the available routes is to conduct a traffic survey.

This survey should collect data on the number of vehicles traveling each route, the average speed of vehicles, the average number of vehicles per lane, and the average number of vehicles per hour or day. This data can then be used to calculate the total number of vehicles that travel each route on a daily basis.

Other factors such as the roadway conditions, the presence of traffic signals, and the availability of public transportation can also be taken into account. Once the traffic demand has been determined, the cost of roadway improvements can be calculated.

For more questions like Rroadway improvements click the link below:

https://brainly.com/question/24732586

#SPJ4

His job objective must be straight forward stating he has experience and individuality of passion

What is an objective in a cover letter?

A cover letter objective is a statement, usually near the top of your cover letter, that describes the goals you'd like to achieve at a company if hired. The objective typically focuses on your skills and how you intend to apply them to the role for which you are applying.

Deshaun's objective must be :

As your next Business Development Executive at COMPANY NAME I stand to significantly contribute to your objectives as an experienced, senior-level business development manager with a strong history of driving dynamic product and service sales, managing partner relationships, and significantly increasing revenues.

My background in identifying new business opportunities, cultivating C-level relationships, and leading effective sales and market penetration strategies positions me to have a significant impact on your organization. I excel at managing programs, projects, and technical services to sustain revenue growth by leveraging expertise and insight to implement forward-thinking and strategic business development solutions.

Hence following the above objective helps him get into the opportunity

To know more on cover letter follow this link:

https://brainly.com/question/3602860

#SPJ1

Used lumber must have Nails withdrawn before stacking. Thus, Option C is the correct option

The term "lumber" refers to wood that has undergone processing to become dimensional lumber, including beams and planks or boards. The majority of construction uses for lumber are framing and finishing (floors, wall panels, window frames).

Beyond building homes, lumber has many other uses. Although the term timber is still occasionally used to refer to lumber in England, most other countries use the term lumber to refer to unprocessed wood fiber, such as cut logs or standing trees that have not yet been cut.

Lumber can be delivered in two different forms: rough-sawn or surfaced on one or more of its faces. Rough lumber, in addition to pulpwood, is the primary raw material used in the production of furniture and other items that need to be cut and shaped.

Learn more about Lumber

https://brainly.com/question/29706005

#SPJ4

No. Human reasoning and comprehension have no theoretical basis in computational theory. In other words, the brain is not Turing his machine, but people like Alan Turing and John Nash mistakenly believed it was.

One of the problems with answering this question is that many people assume that all non-biological systems are AI, and AGI systems run on computers. Neither are they. An AGI system may have human-level reasoning and comprehension, but it is not a Turing machine.

What is Human reasoning?

Human reasoning as a way of knowing is a particularly interesting property of human intelligence. This is because humans are naturally capable of intuitive, unconstrained thinking, and can process key information by inference to reach further understanding. In this way, people can acquire knowledge by collecting sets of facts, interpreting them, and, of course, deducing whether they are true or not. In short, reasoning can be defined as a process that involves drawing conclusions from a set of premises.

No. Human reasoning and comprehension have no theoretical basis in computational theory. In other words, the brain is not Turing his machine, but people like Alan Turing and John Nash mistakenly believed it was.

One of the problems with answering this question is that many people assume that all non-biological systems are AI, and AGI systems run on computers. Neither are they. An AGI system may have human-level reasoning and comprehension, but it is not a Turing machine.

To know more about Human reasoning, visit:

https://brainly.com/question/28898727

#SPJ4

When one of 4 bulbs goes out in a parallel circuit, the other three bulbs will remain lit.

What is parallel circuit?
The branches of a parallel circuit divide the current so that only a portion of it flows through each branch. The fundamental idea of a "parallel" connection, on the other hand, is that all components are connected across one another's leads. In a circuit with only parallel connections, there can never be more than two sets of electrically connected points. Due to these features, parallel circuits are a common choice for use in homes and with electrical equipment that has a dependable and efficient power supply. This is because they permit charge to pass across two or more routes. When one part of a circuit is broken or destroyed, electricity can still flow through the remaining portions of the circuit, distributing power evenly among several buildings.

When 3 bulbs are connected in parallel, they will all be lit at the same brightness. When you add extra light bulbs to a parallel circuit, the brightness of each bulb will decrease due to the increased resistance. When another bulb is added in a series circuit with three bulbs, the brightness of all the bulbs will decrease due to the increased resistance.

To learn more about parallel circuit

https://brainly.com/question/22782183
#SPJ4

A wide moving belt passes through a container of a viscous liquid pressure changes due to the change in elevation of the fluid as it rises are already captured by the gravity term in the Navier-Stokes equations

(a) Since the flow is assumed to be uniform, the Velocity component is in y direction (the component) So that u = V = 0. It follows the continuity equation that dv/dy = 0 and for steady flow dv/dt = 0 so that V = v(x) under these conditions the Navier stokes equations for

dp/dx = 0 , dp/ dz = 0

over a horizontal plane and because the pressure on the Surface of the film (x=h) is atmospheric (or zero gauge pressure). The Navier-Stokes equation. in the y-direction thus reduce. to

0 = -ρg + μ d²v/dx²

or,  d²v/dx² = γ / μ    [γ = ρg]

Integrating the above equation,  

∫d²v/dx² = ∫γ / μ

dv/dx = γ / μ  x +c1

Because there is little air drag on the film. The Shearing stress at the free surface (or any interior parallel surface) is designed as Zxy, where

Zxy = μ dv/dx

c) If Zxy = 0 at x = h

Then 0 = γh/μ + C1

C1 = - γh / μ

Now integrating equation gives the velocity distribution in the film as

v = γ x² / 2μ - γh/μ + C2

At the belt (x=0) the fluid velocity must match the belt velocity Ve so that

V0 = 0-0+C2

C2 = V0

and the velocity  distribution is therefore

v = γ x² / 2μ - γh/μ + V0

with the velocity distribution knowm we can determine the flowrate per unit width q from the relationship

q = ∫ Vdx = ∫ γ x² / 2μ - γh/μ + V0 dx

and thus q = V0 h - γh³/3μ

The average velocity V (where, Q = Vh ) is

Vh = V0h - γh³/3μ

V = V0 - γh²/2μ

f) Average velocity is zero

0 = V0 - γh²/2μ

Vo = γh²/2μ

Learn more about Navier here:

https://brainly.com/question/29991330

#SPJ4

Answer:

If a toilet is cycling on and off and the tank is refilling every few minutes, the first thing that should be checked is the flapper. The flapper is a rubber valve that covers the opening at the bottom of the toilet tank and allows water to flow into the toilet bowl when the toilet is flushed. If the flapper is not sealing properly, water can leak from the tank into the bowl, causing the toilet to continuously cycle on and off. Checking and adjusting the flapper is usually the easiest and quickest solution to this problem. Other potential causes of a toilet cycling on and off, such as a faulty fill valve or a clogged overflow tube, can also be checked if the flapper does not fix the issue.

It is preferable to avoid adding any grooves to a pressure-fed journal bearing since the tremendous radial pressure that results from these grooves can score the shaft. It's accurate.

The components of a straightforward journal bearing consist of a spinning shaft (or journal) supported by a stationary housing, with a small layer of oil separating the two. The lubricant used in journal bearings eliminates metal-to-metal contact and also has a dampening effect, allowing for quiet and smooth operation of engines and motors. As a result of its ability to lessen load friction, journal bearings are frequently utilized in situations where the load is light and the motion is continuous.

Compared to ball and roller bearings, journal bearings are better equipped to handle stress and shock. They also experience reduced weariness. In some cases, especially as the rolling-element bearings start to wear out, they can operate more quietly.

Therefore the correct answer is true.

To learn more about journal bearing refer to :

https://brainly.com/question/16971319

#SPJ4

The warning limit is a value two standard deviations above (or two standard deviations below) the mean. If there is a control chart, if the reading is within the warning limits, "Take another sample."

The purpose of adding warning limits or dividing the control chart into zones is to give early notification when something goes wrong. Instead of immediately initiating process improvement to determine if a particular cause exists, quality engineers should temporarily reduce the sampling rate of the process output until it becomes clear that the process is truly under control. can be increased to.

Control limits are horizontal lines on a control chart that represent the upper and lower limits of the acceptable range of process results. When the plotted data exceeds the control limits. This indicates a natural variation of the process under controlled conditions.

A control chart always has a middle line representing the mean, an upper line representing the upper control limit, and a lower line representing the lower control limit. These rows are determined from historical data.

Learn more about Control chart limit :

brainly.com/question/26478724

#SPJ4

The correct option is (b) Malware is defined as software designed to protect a computer systems.

Malware, an abbreviation for "malicious software," is any intrusive program created by cyber criminals (often referred to as "hackers") to steal data and harm or destroy computers and computer systems.

Viruses, worms, Trojan horses, spyware, adware, and ransomware are a few examples of common malware. Data exfiltration from recent malware assaults has been massive.

Your network will unavoidably be compromised by malware. You need protection that can identify breaches and offer significant visibility.

You must be able to swiftly recognize harmful actors if you want to eradicate malware. This necessitates ongoing network inspection.

The malware must be removed from your network as soon as the threat has been recognized.

Antivirus software available today is insufficient to safeguard against sophisticated online attacks. Become familiar with updating your antivirus program.

To know more about malware, visit:-

https://brainly.com/question/399317

#SPJ1

The correct answer is (b) that is Malware is software developed to safeguard computer systems.

Malware is any program that is purposely meant to disrupt a computer, server, client, or computer network, leak private information, obtain unauthorized access to information or systems, deny access to information, or interfere with the user's computer security and privacy. Malware (short for "malicious software") is a file or code that infects, investigates, steals, or performs nearly any activity an attacker desires. Because malware comes in so many varieties, there are countless ways to infect computers.

To know more about malware,

brainly.com/question/399317

#SPJ4

When approaching Exit 71 on I-71, the best detour is to take Exit 65 and go on local roads to get to your destination. Be prepared for delayed travel as there will be a large backup on this route as well.

It is best to choose detours that meet the drivers' destinations.

There may be several different alternatives to take into account, depending on the final destination.

While on their alternate route, drivers should always be aware of road signs and closures.

Drivers should choose a different route if they discover that their alternate route is similarly blocked or backed up.

If you come upon an impassable road, it is advised that you take an alternative route.

Taking a substantial detour to get to your destination can be essential, depending on how bad the road conditions are.

The ideal alternative while reaching Exit 71 on I-71 is to take Exit 65 and go on local roads to your destination.

There will be a significant backup on this route as well, so plan on having your travel time pushed back.

To learn more about significant backup refer to:

https://brainly.com/question/17355457

#SPJ4

Q. An emergency alert went out Friday night noting I-71 NB near mile marker 63 in Gallatin County was "impassible." Gov. Andy Beshear tweeted that teams were working to find a route to divert traffic for cars stuck on the interstate.

Answer:

Both Carpenter A and Carpenter B are correct.

Explanation:

Both Carpenter A and Carpenter B are correct.

corsehero

Your crankshaft's lack of free rotation could be caused by one of the following: incorrect journal bearings Cylinders that are overpressurized. broken chain or timing belt.

The best approach to turn your engine over is to put the socket on the front of the crankshaft bolt, which is normally mounted to your crankshaft, and then turn the crankshaft manually with your wrench (turning the wrench in a clockwise motion).

The mating ring (with spiral grooves) fitted on a shaft sleeve and secured axially by a clamp sleeve and a locknut make up the rotating assembly. Typically, it is pin- or key-driven. The primary ring is installed in the fixed assembly.

To know more about crankshaft's visit:-

https://brainly.com/question/29694018

#SPJ4

Answer:In this project, you are tasked with creating a program that calculates the U.S. income tax owed based on the following inputs: wages, taxable interest, unemployment compensation, status (dependent, single, or married), and taxes withheld. Your program should follow the specifications provided in the prompt and complete each of the six steps outlined in the prompt.

In step 1, you are asked to input the necessary information for your program to calculate the income tax owed. This includes the wages, taxable interest, unemployment compensation, and taxes withheld.

In step 2, you are asked to complete the calc_AGIO function, which calculates the adjusted gross income (AGI) by summing the wages, interest, and unemployment compensation. Any negative values should be converted to positive before summing to correct potential input errors. The function should return the AGI.

In step 3, you are asked to complete the get_deduction function, which returns the deduction amount based on the status of the individual (dependent, single, or married). The deduction amount should be $6,000 for a dependent, $12,000 for a single individual, and $24,000 for a married individual. If the status is anything but 0, 1, or 2, the function should return $6,000.

In step 4, you are asked to complete the get_taxable function, which calculates the taxable amount by subtracting the deduction amount from the AGI. If the calculation results in a negative value, the taxable amount should be set to zero. The function should return the taxable amount.

In step 5, you are asked to complete the calc_tax function, which calculates the tax amount based on the status and taxable income of the individual. The tax amount should be stored initially as a double, then rounded to the nearest whole number using the round function. The function should return the tax amount.

In step 6, you are asked to complete the calc_tax_due function, which calculates and returns the amount of tax due by subtracting the taxes withheld from the tax amount. If the withheld parameter is negative, it should be set to zero to correct potential input errors.

Once you have completed all of the steps and functions, your program should be able to take the necessary inputs and output the AGI, deduction amount, taxable income, federal tax, and tax due, as specified in the prompt.

Explanation:

The program to calculate U.S. income tax owed given wages, taxable interest, unemployment compensation, status (dependent, single, or married), and taxes withheld is in explanation part.

Computer programming is the process of carrying out a specific computation, typically by designing and constructing an executable computer programme.

Here's a Python program that calculates U.S. income tax owed based on the given inputs:

def calc_AGIO(wages, taxable_interest, unemployment):

   # Calculate adjusted gross income (AGI)

   agi = max(0, wages) + max(0, taxable_interest) + max(0, unemployment)

   return agi

def get_deduction(status):

   # Calculate deduction amount based on status

   if status == 0:

       deduction = 6000

   elif status == 1:

       deduction = 12000

   elif status == 2:

       deduction = 24000

   else:

       deduction = 6000

   return deduction

def get_taxable(agi, deduction):

   # Calculate taxable amount

   taxable = max(0, agi - deduction)

   return taxable

def calc_tax(status, taxable):

   # Calculate federal tax owed based on status and taxable income

   if status == 0 or status == 1:

       if taxable <= 10000:

           tax = round(taxable * 0.1)

       elif taxable <= 40000:

           tax = round((taxable - 10000) * 0.12 + 1000)

       elif taxable <= 85000:

           tax = round((taxable - 40000) * 0.22 + 4600)

       else:

           tax = round((taxable - 85000) * 0.24 + 14500)

   else:

       if taxable <= 20000:

           tax = round(taxable * 0.1)

       elif taxable <= 80000:

           tax = round((taxable - 20000) * 0.12 + 2000)

       else:

           tax = round((taxable - 80000) * 0.22 + 9200)

   return tax

def calc_tax_due(status, wages, taxable_interest, unemployment, taxes_withheld):

   # Calculate tax due based on given inputs

   agi = calc_AGIO(wages, taxable_interest, unemployment)

   deduction = get_deduction(status)

   taxable = get_taxable(agi, deduction)

   federal_tax = calc_tax(status, taxable)

   withheld = max(0, taxes_withheld)

   tax_due = federal_tax - withheld

   return tax_due

# Get user inputs

wages = int(input("Enter wages: "))

taxable_interest = int(input("Enter taxable interest: "))

unemployment = int(input("Enter unemployment compensation: "))

status = int(input("Enter status (0=dependent, 1=single, 2=married): "))

taxes_withheld = int(input("Enter taxes withheld: "))

# Calculate and output tax due

tax_due = calc_tax_due(status, wages, taxable_interest, unemployment, taxes_withheld)

print("Tax due: $" + f"{tax_due:,}")

Thus, in this program, we first define four helper functions calc_AGIO, get_deduction, get_taxable, and calc_tax to calculate various tax-related values.

For more details regarding programming, visit:

https://brainly.com/question/11023419

#SPJ2

True, the cache block's index as well as the block's tag contents.

cache block: The fundamental building block of a cache. may include numerous words or bytes of data. cache line and cache block are identical. It should be noted that this is not the same as a "row" of cache.

Because 26 = 64 and there are 64 sets in the cache, there are 6 index bits. The remaining pieces match the tag. Accordingly, the tag bits that are saved in the tag field to match the address upon cache request total 14 - (6+2) = 6.

To know more about block  visit:-

https://brainly.com/question/3580092

#SPJ4

The world-wide-web uses hypertext transfer protocol for transmitting content. (C)

Hypertext Transfer Protocol (HTTP) is an application-layer protocol in the Internet Protocol Suite model of distributed collaborative hypermedia information systems. HTTP is the basis of data communication on the World Wide Web, and hypertext documents contain hyperlinks to other resources that the user can easily access by clicking the mouse or tapping the screen in her web browser.

The development of HTTP was started in 1989 by Tim Berners-Lee at CERN, who put together a simple document describing client and server behavior using the first version of his HTTP protocol called 0.9 . This first version of the HTTP protocol quickly evolved into a more elaborate version that became the first draft of future versions.

Learn more about hypertext transfer protocol https://brainly.com/question/29388674

#SPJ4

Following is the class to convert Fahrenheit to celsius

Program to convert Fahrenheit to Celsius:

public class FtoC  

{  

  public static void main (String args[])  

   {

         float F,C;  

         C= 13;  

         F =((C*9)/5)+32;  

         System.out.println("Temperature in Fahrenheit is: "+Fahrenheit);  

   }

}  

Program to convert Celsius to Fahrenheit:

public class CtoF

{

public static void main(String args[])

{

float F,C;

F =  C * 9/5  + 32

System.out.println("Temperature in Celsius is : " + Celsius);

}

}

How to convert celsius to fahrenheit?

Converting a temperature value from the Fahrenheit scale to the Celsius scale is known as the Fahrenheit to Celsius conversion. The formula for the relationship between Fahrenheit and Celsius is °C = (°F - 32) 5/9, where C stands for the value in Celsius and F stands for the value in Fahrenheit.

Hence to conclude  converting celsius to fahrenheit

To know more on temperature conversions follow this link:

https://brainly.com/question/26141817

#SPJ4

Metalworking is the process of shaping and forming metals into useful objects. This process can involve cutting, bending, welding, forming, and machining metal components. Metalworking is used in a variety of industries such as automotive, aerospace, construction, and manufacturing.

What is Metalworking?
Metalworking involves the shaping and reshaping of metals to produce practical items, parts, assemblies, and large-scale structures. The term "manufacturing" refers to a broad and varied range of procedures, aptitudes, and equipment used to create things on all scales, from enormous ships, structures, and bridges down to minute engine components and delicate jewelry.

Metalworking is the process of shaping and forming metals into useful objects. This process can involve cutting, bending, welding, forming, and machining metal components. Metalworking is used in a variety of industries such as automotive, aerospace, construction, and manufacturing.

In metalworking, tools are used to shape and form metal into specific components. Common tools used in metalworking include drills, saws, grinders, lathes, and milling machines. Each of these tools has its own specific purpose and can be used for a variety of tasks.

Safety is always a priority when working with metal. Always wear protective gear such as a face shield and eye protection. Hearing protection is also recommended as loud noises can be produced when working with metal.

Cutting metal is one of the most common metalworking processes. This process involves using a cutting tool to remove excess material from a metal workpiece. Common cutting tools include saws, shears, and drills.

Welding is another popular metalworking process. This process involves joining two or more pieces of metal together by melting them together and allowing them to cool. Different types of welding processes such as arc welding, oxy-fuel welding, and MIG welding can be used to join metals.

Bending is a metalworking process that involves using a press or other tool to shape metal into a specific shape. This process is often used to make complex or intricate shapes.

Machining is a metalworking process that involves cutting or shaping metal with a machine tool. This process can involve drilling, turning, milling, and grinding.

Metalworking is an important part of many industries and enables us to make a variety of useful objects. With the right tools and safety precautions, anyone can begin working with metal.

To learn more about Metalworking
https://brainly.com/question/15875826
#SPJ4