which subatomic particles exist in orbital energy levels or shells

The volume of water that has the same mass as 100 cm³ of gold is 1,932 cm³.

To find the volume of water which has the same mass as 100 cm³ of gold, the volume of the water and the mass of the gold needs to be taken into consideration. A gold of 100 cm³ has a certain mass and to find the volume of water which has the same mass as the gold, the following formula can be used;

Density = Mass ÷ Volume

Density is equal to the mass of the object divided by the volume of the object. In other words, it tells us how tightly matter is packed together. By rearranging the formula, Volume can be calculated;

Volume = Mass ÷ Density

Density of gold = 19,320 kg/m³

Therefore, the mass of 100 cm³ of gold can be converted to volume of water which has the same mass as gold using the formula:

Volume = Mass of Gold ÷ Density of Water

Here, the volume of gold is 100 cm³.

1 cm³ = 0.000001 m³

Since mass of gold is not given, let's assume that the gold is of a certain mass of 19,320 kg/m³.

Hence,

Mass of Gold = 19,320 x (100 x 10^-6)

Mass of Gold = 1.932 kg/m³

Volume of Water = Mass of Gold ÷ Density of Water

The density of water is approximately equal to 1,000 kg/m³

Therefore,

Volume of Water = Mass of Gold ÷ Density of Water

Volume of Water = 1.932 ÷ 1,000

Volume of Water = 0.001932 m³

To convert 0.001932 m³ into cm³,

it can be multiplied by 1,000,000.

Hence, Volume of Water = 1,932 cm³

Therefore, the volume of water that has the same mass as 100 cm³ of gold is 1,932 cm³.

Learn more about the density from the given link-

https://brainly.com/question/26364788

#SPJ11

Phosphorus (P) typically forms an ion with a charge of -3 when it becomes an ion.

This is on the grounds that phosphorus has 5 valence electrons in its furthest energy level (electron arrangement : [Ne] 3s² 3p³). Phosphorus typically gains three electrons to complete its valence shell, resulting in a full octet, in order to establish a stable electron configuration.

By gaining 3 electrons, phosphorus forms the phosphide ion (P³⁻), which has a charge of -3.

Valence electrons will be electrons in a molecule's external shell that can assist with shaping compound bonds. In single covalent bonds, both atoms in the bond typically contribute one valence electron to the formation of a shared pair.

Learn more about Ions:

brainly.com/question/1310794

#SPJ11

It is best to use a thermometer for accurate temperature readings. However, qualitative observations can still provide valuable information, especially if used consistently over time to detect patterns in temperature changes.

To qualitatively record the temperature without the use of a thermometer, one can use sensory observations. Sensory observations allow for judgments to be made based on personal experiences, and are not precise measurements.

One can observe changes in air temperature by using senses such as touch, vision, and smell.In order to record the temperature qualitatively every 5 minutes, one should observe and describe whether the temperature is the same, warmer or colder than the previous observation. A table can be used to record these observations, as shown below:Time | Temperature Observation5:00 pm | Same temperature5:05 pm | Warmer than previous5:10 pm | Same temperature5:15 pm | Colder than previous5:20 pm | Warmer than previousAnd so on...It is important to note that these qualitative observations are not precise and can be subjective. It is also important to consider the location of the observation, as temperature can vary based on location.

for such more questions on temperature

https://brainly.com/question/4735135

#SPJ8

The strongest type of intermolecular force present in O2 is dispersion.

Intermolecular forces (IMF) are the forces that bind the molecules together.

They include several different types of forces: London dispersion forces, dipole-dipole forces, hydrogen bonds, and ion-dipole forces.

The strongest type of intermolecular force present in O2 is dispersion.

Dispersion forces, also known as London forces or London dispersion forces, are temporary attractions that occur between molecules due to the constant movement of electrons.

In O2, the electrons are distributed symmetrically around the molecule, making it non-polar and thus not having dipole-dipole forces.

O2 doesn't have hydrogen, so hydrogen bonding doesn't exist in this molecule.

Lastly, O2 does not have any ions, so ion-dipole forces are not present.

learn more about intermolecular force on

https://brainly.com/question/9328418

#SPJ11

An equilibrium problem using ICE tables to calculate the pH of the following solutions:

(a) 0.18 M CH₃NH₂ is 11.88.

(b) 0.18 M CH₃NH₃Cl is 11.88.

(c) A mixture of 0.18 M CH₃NH₂ and 0.18 M CH₃NH₃Cl is 10.47.

a) 0.18 M CH₃NH₂

The equilibrium reaction is

CH₃NH₂ + H₂O ⇌ CH₃NH₃⁺ + OH¯I

0.18 M         0          0C -x           +x         +x

E (0.18 - x)     x           x

Kb = 4.4 × 10⁻⁴

Kb = [CH₃NH₃⁺][OH¯] / [CH₃NH₂]

4.4 × 10⁻⁴ = x² / (0.18 - x)x = 0.012 M

[OH¯] = 0.012 M

[CH₃NH₃⁺] = 0.012 M

[pH] = 11.88

b) 0.18 M CH₃NH₃Cl

CH₃NH₃Cl + H₂O ⇌ CH₃NH₃⁺ + Cl¯I

0.18 M           0          0C -x               +x         +x

E (0.18 - x)     x           x

Kb = 4.4 × 10⁻⁴

Kb = [CH₃NH₃⁺][OH¯] / [CH₃NH₂]

4.4 × 10⁻⁴ = x² / (0.18 - x)x = 0.012 M

[OH¯] = 0.012 M

[CH₃NH₃⁺] = 0.012 M

[pH] = 11.88

c) Mixture of 0.18 M CH₃NH₂ and 0.18 M CH₃NH₃Cl

The total concentration of CH₃NH₂ and CH₃NH₃⁺ is the same at equilibrium because they react with each other.

CH₃NH₂ + CH₃NH₃⁺ ⇌ 2CH₃NH₂⁺I

0.18 M          0.18 M       0C -x                -x            +x

E (0.18 - x)     (0.18 - x)   x

Kb = 4.4 × 10⁻⁴

Kb = [CH₃NH₃⁺][OH¯] / [CH₃NH₂}

4.4 × 10⁻⁴ = x² / (0.18 - x) x = 0.012 M

[OH¯] = 0.012 M

[CH₃NH₃⁺] = 0.192 M

Total [CH₃NH₃⁺] = 0.18 + 0.192 = 0.372 M

pH = 10.47

Learn more about equilibrium: https://brainly.com/question/28467329

#SPJ11

The electron configuration provides information about the arrangement of electrons in the various energy levels and subshells.

The order in which subshells fill in a polyelectron atom follows the Aufbau principle and the Pauli exclusion principle.

These principles dictate the filling order based on the increasing energy levels of the subshells and the restrictions on the maximum number of electrons in each subshell.

Without additional information, it is not possible to determine which subshell fills last. The filling order depends on the specific atom and its electron configuration.

For example, the 1s subshell is the lowest in energy and fills first, followed by the 2s and 2p subshells. Beyond that, the filling order can vary depending on the atomic number and the specific element.

To determine which subshell fills last, one needs to know the electron configuration of the atom in question.

The electron configuration provides information about the arrangement of electrons in the various energy levels and subshells. Only with this information can we determine which subshell fills last in a typical polyelectron atom.

Learn more about electrons from the given link

https://brainly.com/question/26084288

#SPJ11

Answer: 33 mL of 0.4 M Ba(OH2) must be added.

Explanation:

We will solve this problem by tracking the number of moles in the solutions.

Consider the balanced chemical equation for the dissolution of Ba(OH)2:

Ba(OH)2 (aq) --> Ba^2+ (aq) + 2 OH- (aq)

From the coefficients we see that 2 moles of OH- ions are produced for every 1 mole of Ba(OH)2.

For NaOH:

NaOH (aq) --> Na^+ (aq) + OH- (aq),

so 1 mole of OH- ions are produced for every 1 mole of NaOH.

Number of OH- ions

From the information we gathered:

0.4 mol/L Ba(OH2)  x 2 mol OH- / (1 mol Ba(OH)2)  =0.8 mol/L OH-

0.3 mol/L NaOH  x 1 mol OH- / (1 mol NaOH) = 0.3 mol/L OH-

We are asked to find the volume, X, required to give a solution of 0.5 M in OH-.

(0.8 mol/L of OH-) x (X) = 0.8X mol OH-

(0.3 mol/L of OH-) x (0.050 L) = 0.015 mol OH-

Our goal is:

(0.5 mol/L of OH-) x (X + 0.050 L) = 0.5(X + 0.050) mol OH-

Setting the number of moles equal:

0.8X + 0.015 = 0.5(X + 0.050)

0.8X + 0.015 = 0.5X + 0.025

0.3X = 0.010

X = 0.033 L

In other words, the volume of 0.4 M Ba(OH)2 required is 33 mL.

To determine the percent of water in CaSO₄·2H₂O (calcium sulfate dihydrate), we need to calculate the mass of water and the mass of the entire compound, and then the calculated percentage comes out to be approximately 20.95%.

Calculate the molar mass of CaSO₄·2H₂O:

Molar mass of Ca = 40.08 g/mol

Molar mass of S = 32.06 g/mol

Molar mass of O = 16.00 g/mol

Molar mass of H = 1.01 g/mol

Molar mass of water (H2O) = (2 × Molar mass of H) + Molar mass of O

Molar mass of water (H2O) = (2 × 1.01 g/mol) + 16.00 g/mol

Molar mass of water (H2O)  = 18.02 g/mol

Molar mass of  CaSO₄·2H₂O = (Molar mass of Ca) + (Molar mass of S) + (4 × Molar mass of O) + (2 × Molar mass of H₂O)

Molar mass of  CaSO₄·2H₂O = 40.08 g/mol + 32.06 g/mol + (4 × 16.00 g/mol) + (2 × 18.02 g/mol)

Molar mass of  CaSO₄·2H₂O = 172.18 g/mol

Determine the mass of water in  CaSO₄·2H₂O:

Since there are two moles of water per one mole of  CaSO₄·2H₂O, the mass of water is equal to twice the molar mass of water.

Mass of water = 2 × Molar mass of water

Mass of water = 2 × 18.02 g/mol

Mass of water = 36.04 g

Calculate the mass of  CaSO₄·2H₂O:

Mass of  CaSO₄·2H₂O = Molar mass of  CaSO₄·2H₂O

Mass of  CaSO₄·2H₂O = 172.18 g/mol

Calculate the percent of water:

Percent of water = (Mass of water / Mass of  CaSO₄·2H₂O) × 100

Percent of water = (36.04 g / 172.18 g) × 100

Percent of water ≈ 20.95%

Therefore, the percent of water in CaSO₄·2H₂O is approximately 20.95% to three significant figures.

Learn more about molar mass here:

https://brainly.com/question/31545539

#SPJ 4

The total binding energy of [tex]Li_3^7[/tex] is approximately 3.963 MeV. The binding energy per nucleon for [tex]Li_3^7[/tex] is approximately 0.566 MeV/nucleon.

To calculate the total binding energy (BE) and the binding energy per nucleon (BE/A) for 7/3Li, we need to consider the mass defect and the conversion factor between atomic mass units (u) and energy (MeV).

The mass defect (∆m) is the difference between the actual mass of the nucleus and the combined masses of its nucleons. It can be calculated using the following formula:

∆m = Zm(H) + Nm(n) - m(Li)

where:

Z = number of protons

m(H) = mass of a hydrogen atom (1/1H)

N = number of neutrons

m(n) = mass of a neutron

m(Li) = mass of 7/3Li

m(H) = 1.007825 u

m(n) = 1.008665 u

m(Li) = 7.016004 u

To calculate Z and N for 7/3Li, we need to consider that it has 3 protons (Z = 3) and 4 neutrons (N = 4).

∆m = 3 × 1.007825 u + 4 × (1.008665 u - 7.016004) u

∆m = 3.023475 u + 4.03466 u - 7.016004 u

∆m = 0.042131 u

The mass defect (∆m) represents the mass converted into binding energy. To convert the mass defect into energy, we can use the mass-energy equivalence formula:

E = ∆mc²

Where:

E = energy

c = speed of light (approximately 299,792,458 m/s)

Converting the mass defect (∆m) to energy:

E = 0.042131 u × (1.66053906660 × 10⁻²⁷ kg/u) × (299,792,458 m/s)²

E ≈ 3.963 MeV

Therefore, the total binding energy of [tex]Li_3^7[/tex] is approximately 3.963 MeV.

To calculate the binding energy per nucleon (BE/A), we divide the total binding energy by the number of nucleons (protons + neutrons):

BE/A = BE / A

Where:

BE/A = binding energy per nucleon

BE = total binding energy

A = number of nucleons

A = 3 + 4 = 7

BE/A = 3.963 MeV / 7

BE/A ≈ 0.566 MeV/nucleon

Therefore, the binding energy per nucleon for 7/3Li is approximately 0.566 MeV/nucleon.

Learn more about calculation of binding energy per nucleon here:

https://brainly.com/question/31745060

#SPJ11

The complete question is:

Calculate the total binding energy, and the binding energy per nucleon, for 7/3Li. The masses of the atoms of 7/3Li and 1/1H are 7.016004 u and 1.007825 u, respectively. The mass of a neutron is 1.008665 u.

The chemical formula for the compound formed between barium and iodine is BaI₂.

Barium and iodine make an ionic compound. Since Ba is a metal and I is a nonmetal, we may assume this is an ionic compound, which means it's made up of oppositely charged ions. Ba is a Group 2 element, which implies it has two valence electrons and will lose two of them to become a 2⁺ cation. Iodine (I), on the other hand, is a Group 17 element, and it has seven valence electrons, one fewer than the octet.

As a result, it will gain one electron and become a 1⁻ anion when it forms a compound with another element. The sum of their charges is equal to zero, according to the law of conservation of charge.

So, Barium will donate two valence electrons, becoming Ba²⁺ while iodine accepts one electron, becoming I-.So the formula of the compound would be BaI₂.

Learn more about chemical formula :

brainly.com/question/13058832

#SPJ11

After three rounds of β oxidation, the fatty acyl-CoA has been shortened by 6 carbons. The resulting intermediate is unsaturated with the double bond between the third and fourth carbons. Before another round of oxidation occurs, enoyl-CoA isomerase catalyzes the double bond relocation to form a trans double bond.

During β oxidation, fatty acyl-CoA molecules undergo a series of enzymatic reactions that result in the removal of two carbons at a time. After three rounds of β oxidation, a total of six carbons have been removed from the original fatty acyl-CoA molecule. This shortens the chain length.

In the resulting intermediate, a double bond is present between the third and fourth carbons from the carboxyl end of the chain. This unsaturated fatty acyl-CoA molecule is now ready for further processing.

Before the next round of oxidation occurs, the double bond needs to be relocated to maintain the appropriate configuration for subsequent reactions. This is achieved through the action of an enzyme called enoyl-CoA isomerase, which catalyzes the rearrangement of the double bond.

The resulting product of the double bond relocation is a trans double bond, where the hydrogen atoms attached to the two carbon atoms forming the double bond are on opposite sides. This trans double bond is essential for further processing and metabolism of the fatty acyl-CoA molecule.

To learn more about  β oxidation  here

https://brainly.com/question/14276726

#SPJ4

Molecular lines are more complex than elemental spectral lines because molecules have two or more atoms and can vibrate and rotate as well. This gives rise to many different energy levels that electrons can occupy, resulting in a more complex spectrum. Option A and B are the correct answers. Options C, D, and E are not correct as they are not relevant to the question.

The behavior of molecules, which are made up of two or more atoms, is more complex than that of single atoms. This behavior results in a wide range of energy levels, which results in a more complex spectrum of spectral lines. Individual atoms are not as complex as molecules and do not have the same range of energy levels as molecules. Therefore, they produce simpler spectra than molecules.

Hence, option A and B are the correct answers. Options C, D, and E are not correct as they are not relevant to the question.

To know more about atoms visit-

https://brainly.com/question/1566330

#SPJ11

There is an inverse relationship between atomic radius and ionization energy. As atomic radius increases, ionization energy decreases and vice versa.

Atomic radius is the distance between the nucleus and the outermost shell of an atom. Ionization energy is the amount of energy required to remove an electron from the outermost shell of an atom. These two properties are inversely related to each other. If the atomic radius of an atom is increased, it means that the distance between the nucleus and the outermost shell is increased as well.

Therefore, it requires less energy to remove an electron from the outermost shell as the attraction between the positively charged nucleus and negatively charged electron is decreased. In contrast, if the atomic radius of an atom is decreased, the distance between the nucleus and the outermost shell is decreased as well, making it more difficult to remove an electron. Thus, ionization energy increases. Hence, there is a negative correlation between atomic radius and ionization energy.

Learn more about ionization energy here:

https://brainly.com/question/28385102

#SPJ11

Primary pollutants are pollutants that are formed from a chemical reaction between different compounds and are harmful to the environment and human health.

Primary pollutants can be emitted directly into the atmosphere and are mainly the result of human activity.

Coal is a fossil fuel composed of carbon, hydrogen, oxygen, nitrogen, and sulfur, formed over millions of years and extracted from underground deposits.

The primary pollutants produced by burning coal include sulfur dioxide (SO2), carbon monoxide (CO), particulate matter, and nitrogen oxide (NOx).

Sulfur dioxide (SO2), emitted when coal is burned, can cause respiratory problems and contribute to acid rain.

Carbon monoxide (CO), another pollutant produced by burning coal, can lead to carbon monoxide poisoning.

Soot, a form of particulate matter, is also produced when coal is burned and can be harmful to human health when inhaled.

learn more about pollutants on

https://brainly.com/question/29594757

#SPJ11

The solubility of NH4Cl at 80.0 °C is approximately 150 g/100 mL.

To calculate the solubility of NH4Cl at 80.0 °C using the NH4Cl solubility curve, we need to follow the steps below:

Step 1:

Draw a line from the temperature point of 80.0 °C to the solubility curve.

Step 2:

Draw a horizontal line from the endpoint of the line drawn in step 1 to the y-axis.

Step 3:

Read off the solubility value from the y-axis.

The solubility of NH4Cl at 80.0 °C can be calculated as follows:

Step 1:

Draw a line from the temperature point of 80.0 °C to the solubility curve

Step 2:

Draw a horizontal line from the endpoint of the line drawn in step 1 to the y-axis.

Step 3:

Read off the solubility value from the y-axis.

The solubility of NH4Cl at 80.0 °C is approximately 150 g/100 mL.

Learn more about solubility in the link:

https://brainly.com/question/9098308

#SPJ11

Without a specific solubility curve for NH4Cl, one would determine the solubility at 80.0 ºC by locating 80.0 ºC on the temperature axis, moving upwards to intersect the curve, then across to the solubility axis.

To calculate the solubility of NH4Cl at 80.0 ºC, one would need to consult the specific solubility curve for NH4Cl. But, without a specific figure or data, I can't provide a numerical value for the solubility of NH4Cl at 80.0 ºC. However, the process would involve finding 80.0 ºC on the x-axis (temperature axis) of the curve and then moving up to meet the curve. From that point, you would move horizontally to meet the y-axis (solubility axis), the value there would be the solubility of NH4Cl at 80.0 ºC.

https://brainly.com/question/14366471

#SPJ2

The enolase reaction is inhibited by sodium fluoride (NaF).

Enolase is an enzyme that catalyzes the conversion of 2-phosphoglycerate (2-PG) to phosphoenolpyruvate (PEP) in the glycolysis pathway. The reaction involves the removal of a water molecule from 2-PG to form a double bond in the enol form, which is then converted to the keto form to produce PEP.

The reaction can be represented as follows:

2-Phosphoglycerate (2-PG) ⇌ Phosphoenolpyruvate (PEP)

The presence of sodium fluoride (NaF) inhibits this reaction. NaF is known to interact with metal ions, particularly magnesium ions (Mg2+), which are essential cofactors for enolase activity. NaF forms a complex with Mg2+ ions, reducing their availability for enolase, thus inhibiting its catalytic function.

Learn more about phosphoglycerate

brainly.com/question/31594691

#SPJ11

The potential difference generated between the two electrodes of a glass electrode varies with the pH of the solution.

The glass electrode has a pH-sensitive membrane consisting of a thin layer of a special glass that is permeable to hydrogen ions. The pH difference across the membrane of a glass electrode. The potential difference created across the two electrodes of a glass electrode is sensitive to the pH of the solution in which the electrode is immersed.

                                    The potential difference between the two electrodes of a glass electrode changes as the pH of the solution being evaluated changes. The magnitude of the potential difference produced is proportional to the logarithm of the hydrogen ion concentration of the solution.

                                   To ensure that the reading is consistent, it is essential to calibrate the pH meter regularly. A buffer solution of pH 7.00 is used to calibrate the glass electrode and reference electrode. It's crucial to rinse the electrodes between measurements to avoid contamination that may affect the readings obtained.

Learn more about glass electrode

brainly.com/question/32506049

#SPJ11

The reaction between iron and oxygen is a chemical reaction of synthesis.

The reaction between iron and oxygen is an example of synthesis reaction. It occurs when two or more chemical substances come together to form a more complex compound. Iron and oxygen combine in the presence of heat to form iron oxide, which is rust. The reaction is exothermic, releasing energy in the form of heat.

The chemical equation for the reaction is: 4Fe + 3O₂ → 2Fe₂O₃

In this reaction, iron loses electrons to oxygen, forming iron oxide. This process is known as oxidation, and the substance that undergoes oxidation is called the reducing agent. Oxygen gains electrons, and is therefore reduced, forming the product, iron oxide. The substance that undergoes reduction is called the oxidizing agent. This reaction is important because it is responsible for the formation of rust, which can cause damage to metal structures and objects.

Learn more about oxidation here:

https://brainly.com/question/13182308

#SPJ11

Based on the information provided, the principle of the conservation of mass did apply in this example.

The principle of the conservation of mass states that mass is neither created nor destroyed in a chemical reaction. In other words, the total mass of the reactants should be equal to the total mass of the products.

In the given scenario, Nicole measured 25 g of sodium carbonate and 10 mL of vinegar, which can be considered the reactants. The total mass of the reactants and the beaker was determined to be 100 g. After mixing the reactants, bubbling and a white residue were observed, and the total mass became 98 g.

To analyze the conservation of mass, we need to consider the mass of the products formed. The bubbling and white residue suggest a chemical reaction occurred, likely resulting in the formation of a gas and a solid product. Although the exact reaction and products are not specified, it is evident that some change took place.

The total mass decreasing from 100 g to 98 g indicates that the mass of the products is less than the mass of the reactants and the beaker. This might be due to the formation of a gas that escaped from the reaction mixture.

While the total mass decreased, it is important to note that mass was not created or destroyed. The lost mass in the form of the escaping gas can be accounted for if it is considered separately.

For more such questions conservation visit:

https://brainly.com/question/19162396

#SPJ8

The percentage yield of benzoic acid is 73.27%. This represents the efficiency of the reaction in converting benzyl alcohol to benzoic acid.

To calculate the percentage yield of benzoic acid, we need to compare the actual yield (the amount of benzoic acid obtained) to the theoretical yield (the maximum amount of benzoic acid that could be obtained based on the starting material, benzyl alcohol).

First, we need to determine the theoretical yield of benzoic acid. The balanced equation for the reaction between benzyl alcohol and an oxidizing agent to form benzoic acid is:

C₆H₅CH₂OH + [O] -> C₆H₅COOH + H₂O

The molar mass of benzyl alcohol (C₆H₅CH₂OH) is 108.14 g/mol, and the molar mass of benzoic acid (C₆H₅COOH) is 122.12 g/mol.

From the given information, we have:

Mass of benzyl alcohol = 20.2 g

To find the theoretical yield, we can use the molar ratio between benzyl alcohol and benzoic acid. From the balanced equation, the ratio is 1:1.

So, the theoretical yield of benzoic acid is:

Theoretical yield = (20.2 g / 108.14 g/mol) * 122.12 g/mol = 22.75 g

Now, we can calculate the percentage yield using the formula:

Percentage yield = (Actual yield / Theoretical yield) * 100

Given:

Actual yield of benzoic acid = 14.8 g

Theoretical yield of benzoic acid = 22.75 g

Percentage yield = (14.8 g / 22.75 g) * 100 = 73.27%

Therefore, the percentage yield of benzoic acid is 73.27%.

To learn more about  percentage yield  here

https://brainly.com/question/29714892

#SPJ4

[tex]2Cu + 2Ag^+ \rightarrow 2Cu^{2+} + 2Ag[/tex] is a balanced overall reaction from these unbalanced half-reactions.

A chemical equation that is balanced has the same amount of atoms of each element on both sides of the equation. A chemical reaction must be balanced in order for mass to be preserved, which means that all of the atoms present in the reactants must also be present in the products. One must change the equation's coefficients in order to balance a response. The moles of each compound involved in the reaction are represented by the coefficients.

[tex]Cu \rightarrow Cu^{2+}[/tex]

[tex]Ag^+ \rightarrow Ag[/tex]

Balancing the half equation

[tex]2Cu \rightarrow 2Cu^{2+}[/tex]

[tex]2Ag^+ \rightarrow 2Ag[/tex]

balanced overall reaction:

[tex]2Cu + 2Ag^+ \rightarrow 2Cu^{2+} + 2Ag[/tex]

To know ore about balanced reaction, here:

https://brainly.com/question/28215760

#SPJ4

The kinetic energy of the electron after the photon is scattered is equal to the energy of the scattered photon.

When an electron absorbs a photon, it gets excited and jumps to a higher energy level. When the electron loses the excess energy, it emits a photon with an energy equivalent to the difference in energy between the initial and final energy levels. The energy of the photon is transferred to the electron, giving it kinetic energy.

Kinetic energy-

The kinetic energy of an object is the energy that it possesses due to its motion. It is determined by the mass of the object and its velocity. The kinetic energy equation is given by:

K.E. = 1/2mv²

Where,K.E. is the kinetic energy of the object

m is the mass of the object

v is the velocity of the object

To calculate the kinetic energy of the electron after the photon is scattered, we need to know the initial and final energies of the electron. The difference between these two energies gives us the energy that the electron has gained.

The kinetic energy of the electron after the photon is scattered is equal to the energy gained by the electron. Since the energy of the photon is transferred to the electron, the kinetic energy of the electron is equal to the energy of the scattered photon.

In conclusion, the kinetic energy of the electron after the photon is scattered is equal to the energy of the scattered photon.

Learn more about the kinetic energy from the given link-

https://brainly.com/question/8101588

#SPJ11

The pair of isotopes is O 16 and O 18.

An isotope is a chemical element that has the same number of protons in the nucleus but a different number of neutrons. This gives them a different atomic weight. For example, carbon-12, carbon-13, and carbon-14 are isotopes of carbon.

The given options, OHH 32, s. 32 5-2 16 16 O02, 03 O14 C, LAN N, do not match the criteria to be isotopes of each other. OHH32 is not an element, while s. 325-2 is an ion. O02 and O03 are isotopes of oxygen but have different atomic numbers. Lastly, 14C and LAN N are not the isotopes of each other because they are from different elements.

Thus, the correct pair of isotopes is O16 and O18.

Learn more about isotopes here:

https://brainly.com/question/21536220

#SPJ11

Answer:

Carbon atoms each form four strong bonds. The bonds are covalent (atoms share electrons). This gives graphite its characteristic properties such as high melting and boiling points, good electrical conductivity, and softness. Use as pencil 'lead', as a lubricant in oil, furnace linings, electrodes, neutron moderators in nuclear power stations.

Diamond atoms each form three strong covalent bonds in the same layer and one weak bond to an atom in another layer.  Diamonds have a high level of hardness, thermal conductivity, and optical dispersion. It is used for jewellery, oil-well drills, abrasives and cutting tools.

Explanation:

Structure of Graphite and Diamond (attached below):

We can see here that based on the description provided, the electron configuration can be represented pictorially as follows:

1s: ↑↓

2s: ↑↓

2p: ↑↓ ↑↓ ↑↓

3s: ↑↓

3p: ↑↓ ↑↓ ↑↓

4s: ↑↓

3d: ↑↓ ↑↓ ↑↓ ↑↓ ↑↓

4p: ↑↓ ↑↓ ↑

Electron configuration refers to the arrangement of electrons within an atom, specifically how they are distributed among the atomic orbitals. It describes the energy levels and sublevels occupied by electrons in an atom or ion.

In this representation, the arrows indicate the electrons, and the superscript numbers denote the number of electrons in each orbital. The "up" arrows (↑) represent electrons with a positive spin (+1/2), and the "down" arrows (↓) represent electrons with a negative spin (-1/2).

Learn more about electron configuration on https://brainly.com/question/26084288

#SPJ4

Alkane halogenation is a two-step reaction that involves the replacement of a hydrogen atom in the alkane with a halogen atom. The two steps are initiation and propagation. In the initiation step, a halogen molecule, such as Cl2 or Br2, undergoes homolytic cleavage to form two halogen radicals, each with an unpaired electron.

The propagation step involves the halogen radicals attacking the alkane molecule, leading to the formation of an alkyl radical and a hydrogen halide. The alkyl radical then reacts with another halogen molecule to form a new halogen radical and a halogenated alkane. The new halogen radical can then continue to attack other alkane molecules, propagating the chain reaction until all the halogen has been consumed or all the alkane has been halogenated.

In summary, alkane halogenation is a two-step process that involves initiation and propagation. In the initiation step, halogen molecules undergo homolytic cleavage to form halogen radicals.

In the propagation step, halogen radicals attack the alkane molecule, leading to the formation of an alkyl radical and a hydrogen halide. The alkyl radical then reacts with another halogen molecule to form a new halogen radical and a halogenated alkane, which can then continue the reaction until all the halogen or alkane is consumed.

To know more about replacement visit-

https://brainly.com/question/31948375

#SPJ11

The change in total entropy can be zero while the entropy of the system and surroundings individually are not zero.

a) False. Spontaneous reactions can occur at different rates. Some spontaneous reactions may happen quickly, while others can be relatively slow.

b) False. The reverse of a spontaneous reaction is typically nonspontaneous, but it depends on the specific conditions. A reversible reaction can be in equilibrium when the forward and reverse reactions occur at the same rate.

c) False. Not all spontaneous processes release heat. Some spontaneous processes, such as an endothermic reaction, absorb heat from the surroundings.

d) True. The boiling of water at 100 °C and 1 atm is a spontaneous process under standard conditions.

e) False. If a process increases the freedom of motion of the particles of a system, the entropy of the system typically increases. This is in line with the second law of thermodynamics, which states that the entropy of an isolated system tends to increase over time.

Regarding the statement about ASys and ASur at equilibrium, it is incomplete.

At equilibrium, both the entropy of the system (ASys) and the entropy of the surroundings (ASur) are not individually equal to zero.

However, the change in total entropy (ATotal = ASys + ASur) can be zero at equilibrium.

Learn more about entropy from the given link

https://brainly.com/question/419265

#SPJ11

After 836.68 seconds, the rate constant for this first-order reaction is [tex]0.0037s^-1.[/tex]

We can find the time at which a first-order reaction takes place.

1: Use the given formula for first-order reactions:  

k = [tex](1/t)ln(Co/Ct)[/tex]

where

t is the time,

Co is the initial concentration, and

Ct is the concentration at time t.  

Rearrange the equation as:

[tex]t = (1/k)ln(Co/Ct)[/tex]

2: Substituting the given values:

[tex]k = 0.0037 s^-1[/tex]and

Co/Ct = 150

t = (1/0.0037)

ln(150) = 836.68 seconds

After 836.68 seconds, the rate constant for this first-order reaction is [tex]0.0037s^-1.[/tex]

Learn more about first-order reaction from this link:

https://brainly.com/question/28408854

#SPJ11

When 3.56 g of Mg reacts at constant pressure, approximately -87.43 kJ of heat is transferred. The negative sign indicates that heat is released during the reaction (exothermic).

Enthalpy is the measurement of energy in a thermodynamic system. The quantity of enthalpy equals to the total content of heat of a system, equivalent to the system’s internal energy plus the product of volume and pressure.

For a process taking place at constant pressure, the enthalpy change is equal to the heat absorbed or evolved. If the enthalpy change is positive, heat is absorbed and the reaction is endothermic. If the enthalpy change is negative, heat is evolved and the reaction is termed exothermic.

The reaction is exothermic. This can be determined by the negative sign of the enthalpy change (ΔH). In this case, the ΔH value is -1204 kJ, indicating that heat is released during the reaction.

moles of Mg = mass / molar mass

moles of Mg = 3.56 g / 24.31 g/mol = 0.1464 mol

From the balanced equation, the molar ratio between Mg and ΔH is 2:1204 kJ.

So, for every 2 moles of Mg, 1204 kJ of heat is released.

heat transferred = (0.1464 mol / 2 mol) × (-1204 kJ)

heat transferred = -87.43 kJ

Learn more about Enthalpy, here:

https://brainly.com/question/29145818

#SPJ4

Answer: Air pollution is the main cause of rise in temperature over the past century.

Explanation:

Due to increase in the industrialization in different countries of the world and also burning of more fossil fuels in the engines of vehicles and jets are the main reason of increasing global temperature. Both industries and vehicles produce high amount of carbondioxide which is a greenhouse gas that blocks the passage of reflected radiation from the earth surface and traps this radiation which increases the temperature of the earth.