Why are the largest craters we find on the Moon and Mercury so much larger than the largest craters we find on the Earth

Answer:

Etc....

Explanation:

#keep learning!!

Explanation:

POTENTIAL energy is the energy that is stored in an object due to its position relative to some zero position.

Answer:

1.the friction of air, gravity2.gravity

Answer:

The softball experiences an applied force as a result of Amy’s throw. As the ball moves, it experiences drag from the air it passes through. It also experiences a downward pull because of gravity.

Explanation:

Plato

Answer:

The magnetic field through the wire must be changing

Explanation:

According to Faraday's law, the induced emf, ε in a metallic conductor is directly proportional to the rate of change of magnetic flux,Φ  through it. This is stated mathematically as ε = dΦ/dt.

Now for the wire, the magnetic flux through it is given by Φ = ABcosθ where A = cross-sectional area of wire, B = magnetic field and θ = angle between A and B.

So, dΦ/dt = dABcosθ/dt

Since A and B are constant,

dΦ/dt = ABdcosθ/dt = -(dθ/dt)ABsinθ

Since dθ/dt implies a change in the angle between A and B, since A is constant, it implies that B must be rotating.

So, for an electric current (or voltage) to be produced in the wire, the magnetic field must be rotating or changing.

[tex]\bold{{Answer}}[/tex]

O physical, chemical, respectively

please buddy correct me if im wrong

The ability of a metal to react with air and water is a  chemical, chemical, respectively property

A chemical change occur when the substance's composition is changed or when bonds are broken and new ones are forms a chemical change occur .

When a metal burn in air or react with air it form metal oxide and when metal react with water it forms oxides or hydroxides and release hydrogen gas . In both the cases change in composition is taking place . hence , bot are chemical reactions

correct answer is O chemical, chemical, respectively

learn more about chemical change

https://brainly.com/question/23693316?referrer=searchResults

#SPJ3

Answer:

1000

Explanation:

the formula of time taken= d/s. t=15000÷15 t=1000. I hope it helps

formula of distance is S=Vt

so, 15000=15t

15000 divide by 15=t

1000=t or t=1000

Answer:

English only

Explanation:

When solving problems related to Electric Fields, care must be taken about symmetries. In our particular case when we take a look to at the drawings of the attached file, we realize:

1.-By symmetry each dx associated at a, has an opposite dx with point b as reference. The respective dE ( the charge is uniform ) is the same, as the charge of the wire is positive the force and the Field on a test charge (+) located at h will be upward, therefore the components dEx will cancel each other and the Electric Field becomes E = Ey = ∫ 2×dE× cosθ

The solutions:

A) Ey = 4623 N/C

B) Ey = 19.34 N/C

E = Ey = ∫ 2×dE× cosθ

Here     cosθ   = h/ d   ⇒  cosθ = h/√h² + x²      dE = K× dQ / d²

d² = h² + x²

k = 8.9 ×10⁹ Nm²C⁻²  ;   dQ = λ×dx     λ = 150×10⁻⁹ C    h = 0.08 m

Then by substitution

Ey =  2 ∫[K× λ×dx/ (h² + x²) ] × h / √h² + x²

reordering that equation:

Ey = 2×K×λ×h ∫ dx / [√ ( h² + x² ) ]³          (2)

To solve the integral we make use of a change of variables

x = h × tanα     then   x² = h² ×tan²α   and  dx = h× sec²α dα

plugging that values in equation (2)

Ey  =  2×K×λ×h ∫  h× sec²α× dα / [√ ( h² + h²tan²α)]³

Ey  = 2×K×λ×h² ∫ sec²α× dα / [ h × √ (1 + tan²α)]³            1 + tan²α = sec²α

Ey = 2×K×λ×h²× ∫ (sec²α / h³× sec³α )×dα

Ey = 2×K×λ/h × ∫ ( 1 / secα dα

Ey = 2×K×λ/h × sinα             now we αneed to come back to our original variables:

as   x = h × tanα         tanα = x/h   then x is the opposite leg in a right triangle  and h the adjacent one then the hypothenuse is √ (h² + x²)         then    sin α = x/ √ (h² + x²)      

Ey = 2×K×λ/h × x/ √ (h² + x²) |₀⁰°⁰⁵

Ey  = 2×8.9×10⁹× 150×10⁻⁹× 5×10⁻²/8× 10⁻²× √ 10⁻² ( 8 + 5 )   N/C

Ey = 4623 N/C

To answer the second question again we will make use of symmetries if you look at drawing ( Figure 2 ) you see that again the components in direction of x-axis cancel each other and the components in y-axis direction will add. Then

Ey = ∫ dE× cosθ

following the same procedure  we will find:

Ey = ∫ [K×λ × dl/d²] × h/ d

The importan point here is that the radius of the circle is

2×π×r = 0.01      ( the length of the wire)  ⇒  r = 0.16×10⁻² m

And we need to take into account that the integration is over the circle and the length of the circle is 0.01 m or ××2×π×r. All other factors are constant. Then by substitution

Ey = [K×λ ×h×  / ( √ r² + h²)³ ] × 10⁻²    N/C

Ey = 8.9 × 10⁹ × 150× 10⁻⁹ × 6× 10⁻² × 10⁻² / √ 10⁻² ( 0.16 + 6)

Ey = 0.8 × 10² / 6

Ey = 19.34 N/C

Answer:

A

Explanation:

The first thing you have to do is go back and list the resistances correctly. R1 = 20 R2 = 30 and R3 = 10.

Leave the units off if you can't make an omega.

The resistance of a series circuit (that's what this is) is r1 + r2 + r3 = 10 + 20 + 30 = 60 ohms

Now use ohms law.

R = 60 ohms

V = 110 volts.

I = V / R

I = 110/60

I = 1.833 to the nearest 1/10 = 1.8

Answer:

Explanation:

The formula for this is

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] where F is the gravitational force, G is the gravitational constant, m1 is the mass of one object and m2 is the mass of the other object. We are looking for r, the distance between the centers of their masses.

Filling in:

[tex]7.5*10^{-8}=\frac{6.67*10^{-11}(90.0)(30.0)}{r^2}[/tex] and moving things around to solve for r:

[tex]r=\sqrt{\frac{6.67*10^{-11}(90.0)(30.0)}{7.5*10^{-8}} }[/tex] Doing all that and rounding to the 3 sig fig's you need gives us a distance of 1.55 m

Answer:

Refraction of waves involves a change in the direction of waves as they pass from one medium to another. Refraction, or the bending of the path of the waves, is accompanied by a change in speed and wavelength of the waves.

Answer:

C voltage

Explanation:

Voltage is the change in electric potential so basically current flows from high potential to low potential due to voltage.

Answer:

i) a₁ = -g (sin θ + μ cos θ), x = v₀² / 2a₁

ii) W = mg L sin  θ ,  iii)     Wₙ = 0

iv)  W = - μ m g  L cos  θ x

Explanation:

With a drawing this exercise would be clearer, I understand that you have a block on a ramp and it is subjected to some force that makes it rise, for example the tension created by a descending block.

The movement is that when the system is released, the tension forces are greater than the friction and the component of the weight and therefore the block rises up the ramp

At some point the tension must become zero, when the hanging block reaches the ground, as the block has a velocity it rises with a negative acceleration to a point and stops where the friction force and the weight component would be in equilibrium along the way. along the plane

i) Let's use Newton's second law

the reference system is with the x axis parallel to the ramp

Axis y

      N - W cos θ = 0

X axis

      T - W sin θ - fr = ma

the friction force is

      fr = μ N

      fr = μ mg cos θ

we substitute

      T - m g sin sin θ - μ mg cos θ = m a

      a = T / m - g (sin θ + μ cos θ)

With this acceleration we can find the height that the block reaches, this implies that at some point the tension becomes zero, possibly when a hanging block reaches the floor.

      T = 0

       a₁ = -g (sin θ + μ cos θ)

       v² = v₀² - 2a1 x

       v = 0       at the highest point

       x = v₀² / 2a₁

ii) the work of the gravitational force is

       W = F .d

       W = mg sin  θ   L

iii) the work of the normal force

the force has 90º with respect to the displacement so cos 90 = 0

         Wₙ = 0

iv) friction force work

friction force always opposes displacement

         W = - fr d

         W = - μ m g cos  θ L

Answer:

im pretty sure it should be 50.0

Answer:

Friction always acts opposite to the motion.

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

Answer:

The altitude of the plane is 379.5 m.

Explanation:

Initial horizontal velocity, u = 59.1 m/s

Horizontal distance, d = 521 m

let the time taken by the packet to cover the distance is t.

Horizontal distance = horizontal velocity x time

521 = 59.1 x t

t = 8.8 s

let the vertical height is h .

Use second equation of motion in vertical direction.

[tex]h = u t + 0.5 gt^2\\\\h = 0 + 4.9 \times 8.8\times8.8\\\\h= 379.5 m[/tex]

Answer:

1. 36.35 g = 36.35E15 micrometer.

II. 36.35 g = 363.5 millimetre.

III. 36.35 g = 0.03635 kilogram.

Explanation:

Given the following data;

To convert the mass in grams (g) to;

I. Micrometer

Conversion:

1 g = 1 exp 15 um

36.35 g = X um

Cross-multiplying, we have;

X = 36.35 * 1 exp 15 = 36.35 exp 15 um

36.35 g = 36.35E15 micrometer

II. Millimetre

Conversion:

1 g = 1 milliliter

36.35 g = X milliliter

Cross-multiplying, we have;

X = 36.35 * 1 = 36.35 milliliter

Next, we would convert milliliter to millimetre;

1 milliliter = 10 millimetre

36.35 milliliter = X millimetre

Cross-multiplying, we have;

X = 36.35 * 10 = 363.5 millimetre

36.35 g = 363.5 millimetre

III. Kilogram

Conversion:

1000 grams = 1 kilogram

36.35 g = X kilogram

Cross-multiplying, we have;

X * 1000 = 36.35 * 1

Dividing both sides by 1000, we have;

X = 36.35/1000 = 0.03635 kilogram

36.35 g = 0.03635 kilogram

Note:

Answer:

T₂ = 305.17 K

Explanation:

Given that,

Heat, Q = 6000 J

Mass, m = 200 gram

Initial temperature, T₁ = 25° C

We need to find its final temperature. Let it is T₂.

We know that,

[tex]Q=mc\Delta T[/tex]

Where

c is the specific heat of water, c = 4.18 J/g°C

So,

[tex]6000=200\times 4.18\times (T_2-298)\\\\\dfrac{6000}{200\times 4.18}=(T_2-298)\\\\7.17=(T_2-298)\\\\7.17+298=T_2\\\\T_2=305.17\ K[/tex]

So, the final temperature is equal to 305.17  K.

Answer:

mass= 0.1993 kg

Explanation:

Using the formula c = Q / (mΔT)

Answer:

(4) A = 3 A, A₂ = 11 A

(5) 7 A

Explanation:

(4)

From the diagram,

A = 3+6+2

A = 11 A

V = A₂R

A₂ = V/R₂............ Equation 1

Given: V = 12 V,  R₂ = 4 Ω

Substitute these values into equation 1

A₂ = 12/4

A₂ = 3 A

(5) Applying,

V = IR'

I = V/R'............ Equation 1

Where V = Voltage, I = cuurent, R' = total resistance.

But,

1/R' = (1/3)+(1/4)

1/R' = (3+4)/12

1/R' = 7/12

R' = 12/7 Ω

Given: V = 12 V

Substitute these values into equation 1

I = 12/(12/7)

I = 7 A

Therefore

A = 7 A

Answer:

The magnetic force acting on the proton is 1.68 x 10^-18 N.

Explanation:

magnetic field, B = 5 T

speed , v = 2.1 m/s

charge q = 1.6 x 10^-19 C

Angle, A = 90 degree

The magnetic force on the charge particle is given by

[tex]F = q v B sin A\\\\F = 1.6\times 10^{-19}\times 2.1\times 5\times sin 90\\\\F = 1.68\times 10^{-18} N[/tex]

Answer:

Heat required = mass× latent heat Q = 0.15 × 871 ×

The heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.

The movement of energy from a hot to a cold item is characterized as heat. Heat energy flows from a hot material to a cold one.

This occurs because faster-vibrating molecules transmit their energy to slower-vibrating ones.

The given data in the problem is;

m is the mass of lead =  0.15 kg  

T is the temperature = 1750°C,

The latent heat of vaporization for lead is, [tex]\rm L_V[/tex] = 871 × 10³ J/kg.

The heat is found as;

[tex]\rm Q= m \times L_V \\\\ \rm Q= 0.15 \times 871 \times 10^3 \\\\ Q=130,650 \ J[/tex]

Hence the heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.

To learn more about the heat refer to the link;

brainly.com/question/1429452

Answer:

519.62 m/s

Explanation:

Applying,

v = √(T/m').............. Equation 1

Where v = velocity of the wave, T = Tension on the string, m' = mass per unit length of the string

From the question,

Given: T = 1350 N, m' = 0.005 kg/m

Substitute these values into equation 1

v = √(1350/0.005)

v = √(270000)

v = 519.62 m/s

Answer: The uses of static electricity include:

--> photocopying machines

--> precipitators

The dangers of static electricity include:

--> sparks that can lead to explosion

--> Damage to electronic equipment

Explanation:

STATIC electricity is defined as the imbalance that exists between a positive and a negative charge either within or outside an object. This is because all physical objects are made up of atoms which contains protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral. This shows that physical objects are made up of charges.

Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are BALANCED in an object, which makes that object neutral.

Applications( uses) of static electricity include:

--> photocopying machines: Inkjet photocopiers and printers use static electricity to guide a minute jet of ink to the page’s precise position.

--> precipitators: the static electricity is applied in an electrostatic precipitator whereby they remove smoke from waste gases before they pass out of the chimneys in power stations that burn fossil fuels.

The disadvantages (dangers) of static electricity include:

--> Sparks that can lead to explosion: sparks generated from static electricity can cause fires or explosions due to the ignition of flammable or explosive mixtures.

--> Damage to electronic equipment: this is due to components from electrostatic discharge.

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

Answer:

the efficiency of the machine is 100%

Explanation:

Given;

load, L = 750 N

length of the lever, L = 2 m

effort applied, E = 250 N

Position of the load from the fulcrum,  = 50 cm

                                     50cm

     0↓--------------------------Δ-------------------------------↓---------200 cm

    750 N                                       x cm                 250 N

Apply the principle of moment;

750(50) = 250(x)

x = (750 x 50) / (250)

x = 150 cm

the distance of the effort = 150 cm = 1.5 m

the distance of the load = 50 cm = 0.5 m

The velocity ratio of the machine = 1.5/0.5

                                                        = 3

The mechanical advantage of the machine is calculated as;

M.A = Load/effort

M.A = 750 / 250

M.A = 3

The efficiency of the machine is calculated as;

E = (M.A / V.R) x 100%

E = (3/3) x 100% = 100%

Therefore, the efficiency of the machine is 100%

Answer:

(a) The motion is uniform

(b)  11.11 m/s

Explanation:

(a)

From the table below, the motion of the bus is uniform.

(b)

Speed(s) = Δd/Δt

s = Δd/Δt............. Equation 1

From the table,

Given: Δd = 10 km = 10000 m, Δt = 15 minutes = (15×60) = 900 seconds

Substitute these values into equation 1

s = 10000/900

s = 11.11 m/s

Answer:

3420.39 N

Explanation:

Applying,

Fd = 1/2(mv²-mu²)................. Equation 1

Where F = force on the bumber, d = distance, m = mass of the car, v = final velocity, u = initial velocity.

make F the subject of the equation

F = (mv²-mu²)/2d............... Equation 2

From the question,

Given: m = 890 kg, v = 0 m/s (to rest), u = 1.4 m/s, d = 0.255 m

Substitute these values into equation 2

F = [(890×0²)-(890×1.4²)]/(2×0.255)

F = -1744.4/0.51

F = -3420.39 N

The negative sign denotes that the force in opposite direction to the motion of the car.

Mendeleev wrote down atomic mass

Answer:

A. Buoyancy.

hope it helps