We do not perform the titration while the sample is at its original temperature because reaction is too slow at original temperature and requires high activation energy.
A titration is a method where the concentration of an unknown solution is ascertained by comparing it to a solution of known concentration. The analyte (the unknown solution) is typically added in a known amount to the titrant (the known solution) from a buret until the reaction is finished.
The slow energy step in the reaction process may require a high activation energy, and the proportion of activated molecules needed to reach this reaction at room temperature or original temperature is too low, so most molecules cannot cross this peak. As a result, the reaction at room temperature proceeds very slowly (the final product is not reached). Heat can enhance the proportion of active molecules and catalyse a larger-scale reaction.
Learn more about room temperature here;
https://brainly.com/question/1747376
#SPJ4
The complex ion [cobr6]3− is a high-spin complex and absorbs light at a wavelength greater than 7. 70×102 nm. how many unpaired electrons will be present in the complex?
There are four unpaired electrons present in the complex ion [tex][CoBr_6]^3^-[/tex]
What is Crystal Field Theory (CFT)?CFT explains the breaking of orbital degeneracy in the transition metal complexes because of the presence of the ligands. It describes the strength of the metal-ligand bondsThere are two types of ligands - weak field ligands and strong field ligandsWeak field ligands form high spin complexes and strong field ligands form low spin complexesHigh spin complexes have more number of unpaired electrons Low spin complexes have less or zero unpaired electronsA complex ion [tex][CoBr_6]^3^-[/tex] is an octahedral complex. Co is the central atom to which 6 Br atoms are attached. Br is a weak field ligand and forms a high spin complex.
Electronic configuration of Co - [tex][Ar] 3d^7 4s^2[/tex]
Electronic configuration of [tex]Co^3^+ \rightarrow [Ar] 3d^6[/tex]
Electronic configuration of [tex][CoBr_6]^3^-\\[/tex] - [tex]t_2_g^4 e_g^2[/tex]
Hence, there are 4 unpaired electrons present in the complex ion [tex][CoBr_6]^3^-[/tex] .
Learn more about Crystal Field Theory (CFT):
https://brainly.com/question/27295962
#SPJ4
HELP PLS I WILL MARK U BRAINLIEST!
Answer: Calcium Hydroxide
Explanation:
CaOH will as it is the only base, the rest is acid
What would the volume of 40g of butane be under a pressure of 1000 Torr and a temperature of 18°C?
From the calculation, the volume of the gas is 12.6 L
What is the pressure of the gas?We can define the pressure of a gas as the force that the gas exerts per unit area of the container. Now we knw that we can be able to obtain the volume of the gas by the use of the ideal gas equation.
Now;
Number of moles = 40g/58 g/mol = 0.69 moles
1 mole of butane occupies 22.4 L
0.69 moles of butane occupies 0.69 moles * 22.4 L/ 1mole
= 15.5 L
Now;
P1 =760 Torr
V1 = 15.5 L
T1 = 273 K
P2 = 1000 Torr
V2 = ?
T2 = 18°C + 273 = 291 K
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 760 Torr * 15.5 L * 291 K/1000 Torr * 273 K
V2 =12.6 L
Learn more about the volume of the gas:https://brainly.com/question/2454734
#SPJ1
A sample of 7.70 l of nh3 (ammonia) gas at 22 ∘c and 735 torr is bubbled into a 0.250 l solution of 0.400 mol l−1 hcl (hydrochloric acid). the kb value for nh3 is 1.8×10−5. part a assuming all the nh3 dissolves and that the volume of the solution remains at 0.250 l , calculate the ph of the resulting solution. express your answer numerically to two decimal places. view available hint(s)
The pH of the solution is 9.14
For ammonia:To calculate the amount of hydrogen gas collected, we use the equation given by ideal gas which follows:
PV = nRT
P= Pressure of the gas = 735 torr
V= volume of the gas = 7.70 l
T= Temperature of the gas= 22°C (22+273K) = 295K
R= Gas constant= 62.364 L torr/mol/K
n = number of moles of ammonia = ?
By substituting the values in the above equation, we get:
735×7.70 = n × 62.364 × 295
5659.5 = n × 18397.38
n= 5659.5/18397.38
n= 0.3076
For hydrochloric acid:To calculate the number of moles for given molarity, we use the equation:
Molarity of the solution = [tex]\frac{moles of solute}{volume of solution}[/tex]
Molarity of hydrochloric acid = 0.400 M
Volume of solution = 0.250 L
Putting values in above equation, we get:
0.400= moles of solute/0.250
moles of hydrochloric acid = 0.1 mol
The chemical reaction for ethylamine and HCl follows the equation:
NH3+HCl---> NH4Cl
Initial: 0.316 0.18
Final: 0.136 - 0.18
volume of the solution = 0.250 l
To calculate the pOH of basic buffer, we use the equation given by Henderson Hasselbalch:
pOH = pKb + log([tex]\frac{salt}{base}[/tex])
pOH = pKb + log([tex]\frac{NH4Cl}{NH3}[/tex])
it is given:
pKb = negative logarithm of base dissociation constant of ammonia =
-log(1.8 × [tex]10^{-5}[/tex]) = 4.74
[NH4Cl] = 0.18/0.450
[NH3] = 0.136/0.450
On substituting the values we get,
pOH= 4.74 + log ([tex]\frac{0.18/0.250}{0.136/0.250}[/tex])
pOH = 4.74 + 0.12
pOH= 4.86
pH + pOH= 14
pH= 14-pOH
= 14-4.86
pH = 9.14
pH of the solution = 9.14
To learn more about calculating pH visit:
https://brainly.com/question/9278932
#SPJ4
A 21. 2-l sample of nitrogen at 3. 65 atm and 22°c is simultaneously expanded to 62. 6 l and heated to 34°c. what is the new pressure of the gas?
a. a. 349 atm
b. 235 atm
c. 1. 19 atm
d. 1. 29 atm
e. 1. 91 atm
Then the new pressure of the sample of nitrogen is 1.28 atm
So, option D is correct one.
Calculation,
Formula used : [tex]P_{1} V_{1} /T_{1} =P_{2} V_{2}/T_{2}[/tex] (i)
Where , P is pressure and V is the volume
Given data,
[tex]P_{1}[/tex] = 3. 65 atm
[tex]V_{1}[/tex] = 21. 2 L
[tex]P_{2}[/tex] =
[tex]V_{2}[/tex] = 62. 6 L
[tex]T_{1}[/tex] = 22°C = 22+273 = 295 K
[tex]T_{2}[/tex] = 34°C = 34 +273 = 307 K
Putting the value of all data given in equation (i) we get,
3. 65 atm × 21. 2 L/295 K = [tex]P_{2}[/tex] × 62. 6 L / 307 K
[tex]P_{2}[/tex] = 3. 65 atm × 21. 2 L × 307 K/295 K × 62. 6 L = 1.28 atm
Then the new pressure the sample of nitrogen is 1.28 atm
Learn more about pressure of nitrogen
https://brainly.com/question/16690104
#SPJ4
How many calories (not joules) are given off when 85 gram of steam condenses to liquid water?
45,849 calories are given off when 85 gram of steam condenses to liquid water.
Vaporization is always a highly endothermic (heat-absorbing) process because you must break all the intermolecular interactions present inside of the liquid phase.
So,
Q = mass × heat of vapourization
Q = m×ΔH[tex]_{vap}[/tex]
Q = 85 × 539.4
Q = 45,849 cal
Therefore, 45,849 calories are given off when 85 gram of steam condenses to liquid water.
Learn more about calories here:
https://brainly.com/question/22374134
#SPJ4
What two effects do impurities have on the melting point of an organic compound and why?
The two effects do impurities have on the melting point of an organic compound are given as ,
They tend to lower the overall melting point of the compound versus the value for he pure material .They ends to increase the range of the melting point values .The impurities decreases the melting point of the substance of organic compounds . This is because there are unwanted particles which weaken the lattice structure of the solids crystal due to which it become less stable and melts before its original melting point.
Example : Let take a clay and add dirt hen it breaks easily from the points where there is dirt . This is essentially what happens with impurities
Learn more about melting point
https://brainly.com/question/25777663
#SPJ4
Arrange the procedural steps, from start to finish, that are required for the correct use of an automatic micropipettor.
Steps that are required for the correct use of an automatic micropipettor -
1. ensure that the pipette is adjusted to discharge the proper V
2. depress the knob until you reach the point of first resistance.
3. dip the tip of the pipette into the solution
4. gradually depress the plunger to suck solution into the tip
5. Remove the tip from the solution and put it on the inside wall of the container into which the solution to be dispersed.
6. again depress the knob to the first point of resistance
7. After a brief pause, depress the knob as far as it will go.
What is the benefit of an automated pipette?Pipettes that are automated can eliminate the need for manual work and provide a variety of benefits. The most obvious benefit is increased throughput, since automation frees up time and effort for other activities. Another advantage is increased repeatability.
To learn more about micropippet from the given link
https://brainly.com/question/23793716
#SPJ4
What is another chloride that could be used instead of the calcium chloride dihydrate to produce a solid precipitate with aqueous sodium carbonate?
cesium chloride is another chloride that could be used instead of the calcium chloride dihydrate to produce a solid precipitate with aqueous sodium carbonate
A mineral salt called cesium chloride (CsCl) is occasionally ingested or administered intravenously to cancer patients seeking alternative therapies. However, the FDA has not yet approved any cesium chloride products to treat cancer or other disorders.
In isopycnic centrifugation, cesium chloride is a common medical compound used to separate different forms of DNA. It is a reagent used in analytical chemistry to distinguish ions based on the hue and shape of the precipitate.
Cesium chloride is not proven to be effective in treating cancer. As an alternative to chemotherapy for cancer, cesium chloride is pushed. Supporters assert that cesium prevents tumor cells from proliferating by neutralizing the poisons they release.
To learn more about cesium chloride please visit -
https://brainly.com/question/11109113
#SPJ4
What is the correct reading of the temperature in the pictured thermometer? make sure to report your reading with the appropriate significant figures.
36°C
The correct reading of the temperature in the pictured thermometer is 36°C.
What is a thermometer?Thermometer is a device that measures temperature. Specifically speaking one that has a sensor placed inside a metal probe that measures temperature changes by changing electrical resistance.How does a thermometer work?In a mercury thermometer, a glass tube is filled with mercury, and the tube is labelled with a standard temperature scale. The mercury expands and contracts as the temperature changes, allowing the temperature to be read from the scale. The temperatures of the body, liquid, and vapor can all be determined with mercury thermometers.What are thermometers and how do they differ?Thermometer Types:laboratory thermometer electronic thermometer IR thermometer for the ears. mercury-filled thermometerExactly who made the thermometer?The thermometer as a temperature measurement tool is usually acknowledged to have been created by the Italian Santorio Santorio (1561-1636), who is credited with adding a scale to an air thermoscope at least as early as 1612.To learn more about thermometer visit:
https://brainly.com/question/24189042
#SPJ4
A 8.5-liter sample of a gas has 1.2 mole of the gas. if 0.65 mole of the gas is added, what is the final volume of the gas? temperature and pressure remain constant. 13 liters 14 liters 18 liters 21 liters
13 liters is the correct answer
13 liters is the final volume of the gas when the temperature and pressure remain constant.
v1/n1 = v2/n2
where,
v1 = initial volume = 8.5 liter
n1= initial mole of gas = 1.2 mole
n2= final mole of gas = 1.2+0.65= 1.85 mole
v2= final volume = ?
8.5 L/1.2 mol = v2/1.85 mol
7 L x 1.85 mol = v2/1.85 mol x 1.85 mol
13 L = v2
v2= 13 liter
What is a mole?A mole is an SI unit used to measure significant numbers of subatomic particles, such as atoms, molecules, or smaller particles. Any substance has an Avogadro number of molecules in a mole. The value of the Avogadro number is 6.02214076 × [tex]10^{23}[/tex].How much is a mole of gas?
22.4 L
At STP (Standard Temperature and Pressure = 0 °C, 1 atm), an ideal gas has a volume of 22.41 L/mol.
What makes something a mole?Chemists use the term "mole" because atoms, molecules, and other particles are all very small and require a large amount to even weigh them. A mole is a measurement of the number of particles present, not their mass.To learn more about mole of gas visit:
https://brainly.com/question/1400967
#SPJ4
A molecular orbital that decreases the electron density between two nuclei is said to be ____.
a. nonpolar
b. antibonding
c. pi-bonding
d. hybridized
e. bonding
A molecular orbital that decreases the electron density between two nuclei is said to be antibonding.
The bonding orbital, which would be more stable and encourages the bonding of the two H atoms into [tex]H_{2}[/tex], is the orbital that is located in a less energetic state than just the electron shells of the separate atoms. The antibonding orbital, which has higher energy but is less stable, resists bonding when it is occupied.
An asterisk (sigma*) is placed next to the corresponding kind of molecular orbital to indicate an antibonding orbital. The antibonding orbital known as * would be connected to sigma orbitals, as well as antibonding pi orbitals are known as [tex]\pi[/tex]* orbitals.
Therefore, molecular orbital that decreases the electron density between two nuclei is said to be antibonding.
Hence, the correct answer will be option (b)
To know more about molecular orbital
https://brainly.com/question/13265432
#SPJ4
According to the iupac convention for chemical naming, which part of a hydrocarbon is selected as the main chain for a hydrocarbon chain?
Answer:
The longest continuous chain
Explanation:
How much energy is required to melt 10. 0 g of ice at 0. 0°C, warm it to 100. 0°c and completely vaporize the sample?
The 7160 cal energy is required to melt 10. 0 g of ice at 0. 0°C, warm it to 100. 0°C and completely vaporize the sample.
Calculation,
Given data,
Mass of the ice = 10 g
Temperature of ice = 0. 0°C
The ice at 0. 0°C is to be converted into water at 0. 0°CHeat required at this stage = mas of the ice ×latent heat of fusion of ice
Heat required at this stage = 10 g×80 = 800 cal
The temperature of the water is to be increased from 0. 0°C to 100. 0°CHeat required for this = mass of the ice×rise in temperature×specific heat of water
Heat required for this = 10 g×100× 1 = 1000 cal
This water at 100. 0°C is to be converted into vapor.Heat required for this = Mass of water× latent heat
Heat required for this = 10g ×536 =5360 cal
Total energy or heat required = sum of all heat = 800 +1000+ 5360 = 7160 cal
to learn more about energy
https://brainly.com/question/7185299
#SPJ4
Discuss potential advantages and disadvantages of using water as a solvent in organic chemistry.
Potential advantages of using water as a solvent in organic chemistry are:
Natural resource, easy to obtain, lower cost.Avoiding biomass drying step.Facilitating recovery of inorganics contained in biomass.Disadvantages of using water as a solvent in organic chemistry
Higher critical point, severe reaction conditions.Lower yields of water insoluble bio-oil.The bio-oil with higher oxygen content and lower calorific value.What is the most widely used liquefaction solvent?Water is the most common liquefaction solvent. Not only is water an environmentally friendly solvent that is inexpensive and does not pollute the environment, but it also facilitates the recovery and recycling of inorganic matter contained in biomass in ionic form for eventual use as fertilizers.
Why is water called a universal solvent?Water dissolves many substances and is known as a universal solvent. We learned that, despite being a universal solvent, it can only dissolve polar molecules and that nonpolar molecules, even when mixed with water, form a separate layer.Many researchers around the world have studied the effect of liquefaction solvent type on the liquefaction behaviors of various biomasses, including lignocelluloses, algae, and sewage sludge.Learn more about water as a solvent:
https://brainly.com/question/1923449
#SPJ4
2H2O2 → 2H2O+O2+196.6 kj.
Hydrogen peroxide decomposes according to the reaction above. How much heat is released during the reaction when 5.0 moles of H2O2 decompose?
2mol of Hydrogen peroxide releases 196.6KJ heat
1mol releases
196.6/298.35mol releases
5(98.3)491.5KJAnswer: 491.5
Explanation:
Hope this helps :)
A sparingly soluble metal fluoride with formula mf2, where m is an unknown metal, has a ksp = 6. 65 x 10-6. calculate the concentration of f- in solution
A sparingly soluble metal fluoride with formula MF₂, where m is an unknown metal, has a Ksp = 6.65 x 10⁻⁶. The concentration of F⁻ in solution 2.36 x 10⁻³M
Ksp is called the Molar solubility product and S is the Molar solubility of an ion in a solution.
According to given formula, the dissociation of metal fluoride MF₂ occurs as follows in aqueous solution:
MF₂ ------> M⁺² + 2F⁻
S 2S
Ksp = [S] [2S]²
Ksp = 4S³
Given, Ksp = 6.65 x 10⁻⁶
On substituting,
6.65 x 10⁻⁶ = 4S³
S³ = 1.66 x 10⁻⁶
S = 1.18 x 10⁻³
So, Solubility of F⁻ ion = 2S
Solubility of F⁻ ion = 2(1.18 x 10⁻³)
Solubility of F⁻ ion = 2.36 x 10⁻³
Since Molarity of the ions is equal to the solubility of the ion in aqueous solution.
Hence, the concentration of F⁻ ion is 2.36 x 10⁻³M.
Learn more about Molar solubility here, https://brainly.com/question/16243859
#SPJ4
A pyranose with the hydroxyl group on the anomeric carbon pointing up in the haworth structure is designated?
A pyranose with the hydroxyl group on the anomeric carbon pointing up in the haworth structure is designated by alpha .
When aldohexoses undergo cyclization, anomers are formed. Anomers differ in the spatial position of the -OH group at [tex]C_{1}[/tex] . When the -OH group is positioned along the direction of [tex]-CH_{2} OH[/tex] , alpha anomer exists but when the -OH group is positioned opposite to the direction of the[tex]-CH_{2} OH[/tex] , then we have the beta anomer. Consider the alpha and beta anomers of galactopyranose and a pyranose with the hydroxyl group on the anomeric carbon pointing up in the haworth structure is given as ,
To learn more about haworth structure
https://brainly.com/question/6623148
#SPJ4
Americium–241 decays into neptunium–237. which correctly describes this process of radioactive decay? an unstable nucleus decays into a more stable nucleus. energy in the nucleus is converted into mass. the strong nuclear force splits the nucleus apart. the atom loses four protons.
When Americium–241 decays into neptunium–237, an unstable nucleus decays into a more stable nucleus.
What is Radioactive decay?
Radioactive decay is the process by which an unstable atomic nucleus loses energy by radiation. A material containing unstable nuclei is considered radioactive. Three of the most common types of decay are alpha decay (α-decay), beta decay (β-decay), and gamma decay (γ-decay), all of which involve emitting one or more particles. The weak force is the mechanism that is responsible for beta decay, while the other two are governed by the electromagnetism and nuclear force. A fourth type of common decay is Electron Capture, in which an unstable nucleus captures an inner electron from one of the electron shells. The loss of that electron from the shell results in a cascade of electrons dropping down to that lower shell, resulting in emission of discrete X-rays from the transitions. A common example is Iodine-125 commonly used in medical settings.Radioactive decay is a stochastic (i.e. random) process at the level of single atoms. According to quantum theory, it is impossible to predict when a particular atom will decay, regardless of how long the atom has existed. However, for a significant number of identical atoms, the overall decay rate can be expressed as a decay constant or as half-life. The half-lives of radioactive atoms have a huge range; from nearly instantaneous to far longer than the age of the universe.The decaying nucleus is called the parent radionuclide (or parent radioisotope), and the process produces at least one daughter nuclide.Except for gamma decay or internal conversion from a nuclear excited state, the decay is a nuclear transmutation resulting in a daughter containing a different number of protons or neutrons (or both). When the number of protons changes, an atom of a different chemical element is created.To learn more about Radioactive decay: https://brainly.com/question/1770619
#SPJ4
What atomic or hybrid orbitals make up the sigma bond between c2 and h in ethylene, ch2ch2?
Explanation:
According to orbital hybridization theory, in ethene the C atoms are using sp2 hybrid orbitals. This leaves one unhybridized p orbital available to form the second bond (Pi bond) in the C-C double bonds.
One sp2 hybrid orbital from each C atom overlap to form one sigma bond between the two carbon atoms. One p orbital from each C atom then overlap to form a pi bond that completes the C-C double bond. The H atoms are bonded via sigma bonds to the C atoms when the H s orbitals overlap with the remaining sp2 hybrid orbitals from each C.
How many milliliters of 10. 5 m hcl(aq) are needed to prepare 225. 0 ml of 1. 00 m hcl(aq)?
There are 21.42 milliliters of a 10. 5 M HCl(aq) are needed to prepare 225. 0 ml of 1. 00 M HCl(aq)
Calculation,
The formula for the dilution of a solution is given as:
[tex]M_{1} V_{1} =M_{2} V_{2}[/tex]
Where M is molarity and V is the volume of the solution in liters ( L ).
Given data,
[tex]M_{1}[/tex] = 10. 5 M
[tex]V_{1}[/tex] = ?
[tex]M_{2}[/tex] = 1. 00 M
[tex]V_{2}[/tex] = 225. 0 ml
10. 5 M × [tex]V_{1}[/tex] = 1. 00 M×225. 0 ml
[tex]V_{1}[/tex] in milliliters = 1. 00 M×225. 0 ml / 10. 5 M = 21.42 ml
Volume in milliliters is 21.42 ml .
to learn more about dilution
brainly.com/question/13949222
#SPJ4
As heat records across europe became toast, england topped what torturous temp for the first time?.
England topped what torturous temp for the first time of 40°C
For the first time ever, Britain experienced temperatures on Tuesday of over 40 degrees Celsius, or 104 degrees Fahrenheit, as a fierce heat wave moved northwest, causing raging wildfires, fatalities, and forced home evacuations throughout a Europe that was terrifyingly unprepared to deal with the new reality of extreme weather.
What is heat wave ?A heat wave is a period of very hot weather that may also be accompanied by significant humidity, especially in nations with maritime climates. While there are several definitions, a heat wave is typically assessed in relation to the local climate and the average temperatures for the time of year.
Heat waves begin when high pressure in the atmosphere moves in and pushes warm air toward the ground. That air warms up further as it is compressed, and we begin to feel a lot hotter.Learn more about Heat wave here:
https://brainly.com/question/28000177
#SPJ4
What is the equilibrium expression for
2SO3(g) 0₂(g) +2SO₂(g)
Answer:
[tex]K_{c} =\frac{[O_{2} ] [SO_{2} ]^{2} }{[SO_{3} ]^{2} }[/tex]
Explanation:
To construct the equilibrium constant, you need the balanced equation:
2 SO₃(g) -----> O₂(g) + 2 SO₂(g)
The equilibrium constant compares the concentrations of the products and the reactants.
The given expression follows this structure:
aA(g) ----> bB(g) + cC(g)
In this equation, the uppercase letters symbolize the molecules and the lowercase letters symbolize their corresponding coefficients in the balanced equation.
The general equilibrium expression looks like this:
[tex]K_{c} =\frac{[B]^{b} [C]^{c} }{[A]^{a} }[/tex]
To be clear, the concentrations in the numerator represent the gaseous products and the concentrations in the denominator represent the gaseous reactants.
Therefore, the equilibrium expression for this equation is:
[tex]K_{c} =\frac{[O_{2} ] [SO_{2} ]^{2} }{[SO_{3} ]^{2} }[/tex]
number of atoms in 10g of compound is 30.066×10^23. find the molecular mass of compound?
The molecular mass of a 10g compound that has 30.066 × 10²³ atoms is 2.00g/mol.
How to calculate molecular mass?The molecular mass of a substance can be calculated by dividing the mass of the substance by the number of moles.
molecular mass = mass ÷ no of moles
However, the number of moles of the substance must first be calculated by dividing the number of atoms by Avogadro's number.
no of moles = 30.066 × 10²³ ÷ 6.02 × 10²³
no of moles = 4.99moles
molecular mass = 10g ÷ 4.99 moles = 2.00 g/mol
Therefore, the molecular mass of a 10g compound that has 30.066 × 10²³ atoms is 2.00g/mol.
Learn more about molecular mass at: https://brainly.com/question/14122402
#SPJ1
When an allergen binds with ige antibodies on mast cells, resulting in release of chemical mediators, this reaction is called:_________
When an allergen binds with IgE antibodies on mast cells, resulting in release of chemical mediators, this reaction is called Type I reactions.
The Type I reactions is also known as immediate hypersensitivity reaction.
This reaction involve immunoglobulin E ( IgE ) - mediated release of histamine and other mediators from mast cells and basophils .
Examples : anaphylaxis and allergic rhinoconjunctivitis.
The IgE molecules bind to high - affinity receptors on the surface of mast cells and basophils and the subsequently cross-linking of these molecules with the allergen releases performed and newly synthesized mediators.
To learn more about allergen
https://brainly.com/question/15418108
#SPJ4
When an electron in a hydrogen atom jumps from an orbital farther from the nucleus to an orbital closer to the nucleus, it?
When an electron in a hydrogen atom jumps from an orbital farther from the nucleus to an orbital closer to the nucleus, the energy is emitted.
The energy of electron decreases. When it goes, the electron release a photon of electromagnetic energy.
When an electron jumps from higher energy orbital to lower energy orbital, the difference in the energies of these two orbitals is radiated as quantum.
E = hc/wavelength
The photon is emitted with the electron moving from higher energy level to lower energy level.
The wavelength of emitted radiation would be (27/32) × wavelength.
Thus we concluded that the energy of photon is exact energy that is lost by the electron moving to its lower energy level.
learn more about wavelength:
https://brainly.com/question/13533093
#SPJ4
A radioactive isotope of potassium (K) has a half-life of 20 minutes. If a 255 gram sample of this isotope is allowed to decay for 80 minutes, how many grams of the radioactive isotope will remain? nd the O a. 8.0 0 b. 63.8 O c. 15.9 0 d 319
Answer:
15.94 g
Explanation:
80 mins is 4 half lives ( 20 min each)
255 * 1/2 * 1/2 * 1/2 * 1/2 = 255 * 1/2^4 = 15.94 g
The sensory neurons within the olfactory organ are stimulated by ________ in the air. proteins pressure dust water chemicals
The sensory neurons within the olfactory organ are stimulated by Chemicals in the air.
Sensory neurons are the neurons that take up the signal from the receptors to the Central Nervous system (CNS)
Olfactory organ is the organ which is capable to sense smell i.e. Olfaction.
The Chemicals present in the air stimulates the sensory neurons present withing the olfactory organ consisting of olfactory epithelium. The cilia present in the epithelium recognizes the chemical present.
The neurons form connections of neuron to the olfactory bulb.
It is a mass of tissue that is round in shape that comprises of several kinds of cells of neurons that are capable to sense smell. It is necessary to sense smell properly.
Odorants are the compound that consist of an odor which get detected by the sensory neurons to carry out olfaction. They activate olfactory receptors and send signals to olfactory bulb.
Learn more about Sensory neurons here, https://brainly.com/question/1967609
#SPJ4
When carbon bonds with oxygen, what is formed? when carbon bonds with oxygen, is formed.
The correct answer is Carbon Dioxide.
What are carbon bonds?Because each carbon is identical, they all contain four valence electrons, so they can easily bond with different carbon atoms to form extended chains or rings. A carbon atom can bond with another carbon atom two or three times to create double and triple covalent adhesives between two carbon atoms.The partial payments on the fluorine and carbon are beautiful, contributing to the unusual bond power of the carbon-fluorine bond. The bond is marked as "the strongest in organic chemistry," because fluorine forms the strongest single bond to carbon.In chemistry, a covalent bond is the strongest bond. In such bonding, every two atoms transfer electrons that bind them concurrently. For example, water molecules are bonded jointly where both hydrogen atoms and oxygen atoms transfer electrons to form a covalent bond.
To learn more about carbon bonds, refer to:
https://brainly.com/question/14700099
#SPJ4
A quantity of an ideal gas is compressed to half its initial volume. the process may be adiabatic, isothermal or isobaric. the greatest amount of work is required if the process is?
the greatest amount of work is required if the process is adiabatic.The correct option is adiabatic.
The process in which heat is constant is called adiabatic process.
The The process in which temperature is constant is called isothermal process.
The process in which pressure is constant is called isobaric process.
The P-V diagram for adiabatic , isothermal and isobaric process is given below.
Work done in process = area encloses by P-V diagram axis . Since area under the curve is maximum for adiabatic process which is shown in the above diagram. So, work done by the gas will be maximum for adiabatic process.
learn more about adiabatic process.
https://brainly.com/question/17192213
#SPJ4
