why is an element atomic mass not listed as a whole number on the periodic table ​

The value of the concentration of each species is,

[[tex]H_2S[/tex]] = 0.054 M

[[tex]HS^-[/tex] ]  = [[tex]H_3O^+[/tex]] = (0.054 M - [[tex]H_3O^+[/tex]])

[[tex]S^{2-}[/tex]] = ([[tex]H_3O^+[/tex]]) - (0.054 M - [[tex]H_3O^+[/tex]])

[[tex]OH^-[/tex]] = Kw / [[tex]H_3O^+[/tex]]

To calculate the concentrations of each species present in a 0.054 M solution of [tex]H_2S[/tex], we need to consider the dissociation of [tex]H_2S[/tex] into its ions, [tex]HS^-[/tex] and [tex]S^{2-}[/tex], as well as the presence of hydroxide ions ([tex]OH^-[/tex]) and hydronium ions ([tex]H_3O^+[/tex]). We'll use the given acid dissociation constants (Ka) and the ion product of water (Kw) to perform the calculations.

Given:

[tex]H_2S[/tex] Ka1 = 8.9 x [tex]10^{(-8)}[/tex]

[tex]H_2S[/tex] Ka2 = 1.0 x [tex]10^{(-19)}[/tex]

Kw = 1.01 x [tex]10^{(-14)}[/tex]

Let's denote the concentration of [tex]H_2S[/tex] as [[tex]H_2S[/tex]], [tex]HS^-[/tex] as [[tex]HS^-[/tex]], [tex]S^{2-}[/tex] as [[tex]S^{2-}[/tex]], [tex]OH^-[/tex] as [[tex]OH^-[/tex]], and [tex]H_3O^+[/tex] as [[tex]H_3O^+[/tex]].

Step 1: Initial concentration of [tex]H_2S[/tex]

[[tex]H_2S[/tex]] = 0.054 M

Step 2: Calculate the concentration of [tex]HS^-[/tex] using Ka1

[[tex]H_2S[/tex]] = [[tex]HS^-[/tex]] + [[tex]H_3O^+[/tex]]

0.054 = [[tex]HS^-[/tex]] + [[tex]H_3O^+[/tex]]

Step 3: Calculate the concentration of [tex]S^{2-}[/tex] using Ka2

[[tex]HS^-[/tex]] = [[tex]S^{2-}[/tex]] + [[tex]H_3O^+[/tex]]

[[tex]S^{2-}[/tex]] = [[tex]HS^-[/tex]] - [[tex]H_3O^+[/tex]]

Step 4: Calculate the concentration of hydroxide ions ([tex]OH^-[/tex]) using Kw

Kw = [[tex]OH^-[/tex]] × [[tex]H_3O^+[/tex]]

1.01 x [tex]10^{(-14)}[/tex] = [[tex]OH^-[/tex]] × [[tex]H_3O^+[/tex]]

Step 5: Calculate the concentration of hydronium ions ([tex]H_3O^+[/tex])

[[tex]H_3O^+[/tex]] = [[tex]OH^-[/tex]] = (Kw / [[tex]H_3O^+[/tex]])

Learn more about concentration at

https://brainly.com/question/3045247

#SPJ4

The negative charge on soil minerals is satisfied by anions from the soil solution is True. The reason is explained below.

The negative charge on soil minerals is typically satisfied by anions from the soil solution. Soil minerals, such as clay minerals and organic matter, often carry negative charges on their surfaces due to the presence of functional groups or substitution of ions within their crystal structures. These negative charges attract and hold onto positively charged cations, such as calcium (Ca2+), magnesium (Mg2+), and potassium (K+).

To maintain electrical neutrality in the soil, anions (negatively charged ions) from the soil solution, such as nitrate (NO3-), sulfate (SO42-), and phosphate (PO43-), are attracted to and surround the negatively charged soil minerals. This process is known as anion exchange. The anions temporarily bind to the soil mineral surfaces and can be released into the soil solution when other anions with higher affinities displace them.

In conclusion, the statement "negative charge on soil minerals is satisfied by anions from soil solution" is true.

To know more about neutrality visit:

brainly.com/question/15395418

#SPJ11

The pH after the addition of 75 mL of LiOH in the titration of 50 mL of 0.40 M HF with 0.25 M LiOH is approximately 4.32.

The balanced chemical equation for the reaction between HF and LiOH is:

HF + LiOH → LiF + H₂O

Since HF is a weak acid, it undergoes partial dissociation in water:

HF ⇌ H⁺ + F⁻

Initially, we have 50 mL of 0.40 M HF, which corresponds to 0.020 moles of HF. The stoichiometry of the reaction tells us that 1 mole of HF reacts with 1 mole of LiOH.

Therefore, the moles of LiOH required for complete reaction with HF is also 0.020 moles.

In the titration, after the addition of 75 mL of 0.25 M LiOH, we have a total volume of 125 mL (50 mL + 75 mL) of the resulting solution.

The moles of LiOH added is calculated as:

0.075 L × 0.25 mol/L = 0.01875 moles

Since the moles of LiOH added (0.01875 moles) is less than the moles of HF (0.020 moles), there is still excess HF present.

To determine the pH, we need to calculate the concentration of the remaining HF and use the equilibrium expression:

Ka = [H⁺][F⁻]/[HF]

Let x be the concentration of HF that remains.

Since HF initially is 0.020 moles and the volume becomes 0.125 L after the addition of LiOH, the concentration of HF is:

x = 0.020 moles / 0.125 L = 0.16 M

Now, we can substitute the values into the equilibrium expression:

7.2 × 10⁻⁴ = [H⁺][0.16]/0.16

Simplifying the equation, we find:

[H⁺] = 7.2 × 10⁻⁴

Taking the negative logarithm of both sides gives:

pH = -log([H⁺]) = -log(7.2 × 10⁻⁴) ≈ 4.32

Therefore, the pH after the addition of 75 mL of LiOH is approximately 4.32.

To know more about logarithm, refer here:

https://brainly.com/question/30226560#

#SPJ4

To react with 16.4 g of Fe₂O₃, we would need 3.700 g of carbon. This calculation is based on the stoichiometry of the balanced chemical equation and the molar masses of Fe2O3 and carbon (C).

To determine the grams of carbon required to react with 16.4 g of Fe₂O₃, we need to use the stoichiometry of the balanced chemical equation:

Fe₂O₃,(s) + 3C(s) → 2Fe(s) + 3CO(g)

From the balanced equation, we can see that 3 moles of carbon (C) react with 1 mole of Fe₂O₃,(Fe₂O₃, has a molar mass of 159.69 g/mol) to produce 3 moles of CO (CO has a molar mass of 28.01 g/mol).

First, we need to convert the mass of Fe₂O₃, to moles:

16.4 g Fe₂O₃,* (1 mol Fe₂O₃, / 159.69 g Fe₂O₃,) = 0.1027 molFe₂O₃,

According to the stoichiometry of the balanced equation, 1 mole of Fe₂O₃, reacts with 3 moles of carbon (C). Therefore, 0.1027 mol Fe₂O₃,would require:

0.1027 mol Fe₂O₃,* (3 mol C / 1 mol Fe₂O₃,) = 0.3081 mol C

Finally, we can convert the moles of carbon to grams:

0.3081 mol C * (12.01 g C / 1 mol C) = 3.700 g C

Therefore, 16.4 g of Fe₂O₃, would require 3.700 g of carbon to react.

To react with 16.4 g of Fe₂O₃,, we would need 3.700 g of carbon. This calculation is based on the stoichiometry of the balanced chemical equation and the molar masses of Fe₂O₃, and carbon (C).

To know more about stoichiometry visit:

https://brainly.com/question/28780091

#SPJ11

The conversion factor for the given statement "A dosage for an antibiotic is 270 mg for 50 kg of body weight" is option A: 270 mg antibiotic / 50 kg body weight.

A conversion factor is a ratio that relates two different units of measurement and allows for the conversion between them. In this case, the statement provides the dosage of the antibiotic (270 mg) for a specific body weight (50 kg). To convert between the units of antibiotic dosage and body weight, we need a conversion factor that relates the two.

Option A, 270 mg antibiotic / 50 kg body weight, provides the correct conversion factor. This ratio allows us to convert between the given dosage of the antibiotic (270 mg) and the body weight (50 kg).

Option B, 27 mg antibiotic / 50 kg body weight, and option D, 270 mg antibiotic / 1 dosage, do not provide the correct conversion factor for the given statement.

Option C, 1 dosage / 270 mg antibiotic, is the inverse of the correct conversion factor and would be used if the goal was to convert from dosage to antibiotic mass.

Learn more about antibiotic here: brainly.com/question/10868637

#SPJ11

A) Electrons flow in the external circuit from the Zn to the Ag electrode.

Explanation: In a voltaic cell, the spontaneous reaction generates an electric current. In this reaction, Zn is oxidized (loses electrons) and Ag+ is reduced (gains electrons). The electrons flow from the Zn electrode (anode) to the Ag electrode (cathode) through the external circuit, generating a current. Therefore, option A is the correct statement about this cell. Option B is incorrect because Zn is oxidized, not reduced. Option C is incorrect because the Ag electrode is positive with respect to the Zn electrode. Option D is incorrect because Zn2+ ions do not migrate towards the anode, but rather towards the cathode.

Electrons flow in a process known as electron flow or electric current. Electron flow refers to the movement of electrons through a conductor, such as a wire, in response to an electric potential difference or voltage. This flow of electrons constitutes an electric current, which is the movement of electric charge.

To know more about Electrons flow visit:

https://brainly.com/question/20494336

#SPJ11

The oxidation numbers are P in H[tex]^{4}[/tex]P2O7: +5, Se8: 0, Mo in MoO4 2-: +6, B in NaBH4: -3, As4: 0, Cr in K2Cr2O4: +6, C in NaHCO3: +4 and Cs in Cs2O: +1

Therefore here are the oxidation numbers for the species or indicated atoms in the following given compounds:

a. P in H4P2O7: +5
b. Se8: 0 (this is since it's an elemental form)
c. Mo in MoO4 2-: +6
d. B in NaBH4: -3

e. As4: 0 (this is since it's an elemental form)
f. Cr in K2Cr2O4: +3
g. C in NaHCO3: +4
h. Cs in Cs2O: +1

More on oxidation: https://brainly.com/question/16976470

#SPJ11

The pH of the solution is approximately 9.50.

When mixing 250.0 mL of 0.900 M NH₄Cl and 250.0 mL of 1.60 M NH₃, we form a buffer solution.

To calculate the pH, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([NH₃]/[NH₄+]).

First, find pKa using the relation pKa = -log(Ka), where Ka = Kw/Kb. Given that Kb for NH3 is 1.8 × 10⁻⁵, we get Ka = 5.56 × 10⁻¹⁰, and pKa = 9.25.

Next, calculate the concentrations of NH₃ and NH₄⁺ after mixing.

Since both volumes are 250.0 mL, the total volume is 500.0 mL.

The new concentrations are [NH₃] = (1.60 M × 250.0 mL) / 500.0 mL = 0.800 M and [NH₄⁺] = (0.900 M × 250.0 mL) / 500.0 mL = 0.450 M.

Finally, substitute the values in the Henderson-Hasselbalch equation: pH = 9.25 + log(0.800/0.450) ≈ 9.50.

Learn more about pH at https://brainly.com/question/2114744

#SPJ11

The equilibrium concentrations for all species in the solution are as follows: [HA] = 0.114 M, [A-] = 0.006 M, and [H+] = 0.006 M.

Let's assume the initial concentration of the weak acid HA is 0.120 M.

Given that the acid is 5.00% ionized, it means that 5.00% of HA has dissociated into its conjugate base A- and H+ ions. Therefore, the concentration of A- is 5.00% of the initial concentration of HA, which is (0.120 M * 5.00%) = 0.006 M.

The remaining portion of HA that has not ionized is given by the initial concentration of HA minus the concentration of A-, which is (0.120 M - 0.006 M) = 0.114 M.

Since the acid is monoprotic, the concentration of H+ is equal to the concentration of A-, which is 0.006 M.

To calculate the pH, we use the formula pH = -log[H+]. Therefore, pH = -log(0.006).

To calculate the Ka (acid dissociation constant), we use the formula Ka = [H+][A-] / [HA]. Plugging in the known values, Ka = (0.006 * 0.006) / 0.114.

The equilibrium concentrations for all species in the solution are as follows: [HA] = 0.114 M, [A-] = 0.006 M, and [H+] = 0.006 M. The pH can be calculated using the equation pH = -log(0.006). The Ka (acid dissociation constant) can be calculated using the equation Ka = (0.006 * 0.006) / 0.114.

To know more about equilibrium, visit:

https://brainly.com/question/18849238

#SPJ11

a. The equilibrium constant for the reaction at 25 °C from the reaction A(aq) ⥫⥬  enzyme B (aq) and the Δ° of the reaction is -5.540 kJ·mol⁻¹ is 2.98 × 10³.

b. The Δ for the reaction at body temperature (37.0 °C) if the concentration of A is 1.5 M and the concentration of B is 0.60 M is  -8.020 kJ·mol⁻¹.

To calculate the equilibrium constant (K'eq) for the reaction at 25°C, we have the relation:

Δ° = -RT ln K'eq

Where R is the universal gas constant, T is the temperature in Kelvin, and ln is the natural logarithm.

Therefore, K'eq = e-Δ°′/RT

Substituting the given values, we have:

K'eq = e-(-5540 J/mol)/(8.314 J/mol K × 298 K)

= 2.98 × 10³

The Δ for the reaction at body temperature (37.0 °C) is given by the relation:

Δ = Δ° + RT ln(Q)

where Q is the reaction quotient at the given concentration of reactants and products.

Q = [B] / [A] = 0.60 / 1.5 = 0.4

Substituting the given values, we have:

Δ = -5540 J/mol + (8.314 J/mol K × 310 K) ln (0.4)

= -8020 J/mol

Therefore, the Δ for the reaction at body temperature is -8.020 kJ·mol⁻¹.

Learn more about equilibrium constant: https://brainly.com/question/29809185

#SPJ11

A transition state analogue is a molecule that mimics the transition state of a reaction catalyzed by an enzyme.

It is a type of enzyme inhibitor that binds to the enzyme in a way that closely resembles the transition state, effectively blocking the enzyme's activity. This type of inhibitor is designed to be highly specific for the target enzyme and can be used to develop drugs that selectively target certain enzymatic pathways. Computational models of the transition state can also be used to design transition state analogues. It is important to note that a molecule that mimics the substrate of an enzyme is not necessarily a transition state analogue, as it may not have the same binding properties as the actual transition state. The design and synthesis of transition state analogues require a deep understanding of the reaction mechanism and the specific interactions that occur during the transition state. These compounds can provide valuable insights into the reaction process and help in the development of more effective inhibitors or catalysts.

To know more about enzyme inhibitor, visit:

https://brainly.com/question/31819551

#SPJ11

The fossil is expected to be around 21850 years old based on the given Carbon 14 (14C) level.

What is Carbon 14 (14C) level?

The age of a fossil can be estimated using the decay of a radioactive isotope called carbon-14 (14C). The half-life of carbon-14 is approximately 5730 years, which means that after 5730 years, half of the original carbon-14 in a sample will have decayed.

To calculate the age of the fossil, we need to determine the number of half-lives that have passed. We can use the following formula:

Age of the fossil = (ln(C14 ratio in fossil / C14 ratio in living organisms)) / (-0.693) * Half-life of carbon-14

Let's plug in the values:

Age of the fossil = (ln(75.0)) / (-0.693) * 5730 years

Calculating this, we find:

Age of the fossil ≈ 21850 years

Therefore, based on the given carbon-14 (14C) level, the fossil is estimated to be around 21850 years old.

To learn more about Carbon-14 (14C),

https://brainly.com/question/4206267

#SPJ4

Therer are 0.494 moles of H₂ are formed by the complete reaction of 0.329 mol of Al.

To find the number of moles of H₂ formed by the complete reaction of 0.329 mol of Al, \it is required to balanced chemical equation for the reaction between Al and H₂.

The reaction is as observe:

2Al + 6HCl → 2AlCl3 + 3H2

According to balanced equation, it is observed that 2 moles of Al react to make 3 moles of H₂.

Thus, set up a ratio:

2 mol Al : 3 mol H₂

Next, use this ratio to find the number of moles of H₂ formed.

According to question 0.329 mol of Al, set the proportion:

2 mol Al / 3 mol H₂ = 0.329 mol Al / x

By cross-multiplication:

2 mol Al × x = 3 mol H₂  × 0.329 mol Al

2x = 0.987

Dividing both sides by 2:

x = 0.987 ÷ 2

x = 0.494

Thus, 0.494 moles of H₂ are formed by the complete reaction of 0.329 mol of Al.

Learn more about moles, here:

https://brainly.com/question/30885025

#SPJ1

The chemical equation for the ionic reaction between Na2S and AgNO3 is as follows:
Na2S + 2AgNO3 → 2NaNO3 + Ag2S


The ionic reaction between Na2S and AgNO3 is a double displacement reaction, which involves the exchange of ions between two compounds. When Na2S and AgNO3 are mixed, the sodium cation (Na+) and the silver cation (Ag+) switch places, forming two new compounds: NaNO3 and Ag2S.

The chemical equation for this reaction is Na2S + 2AgNO3 → 2NaNO3 + Ag2S. This equation shows that two moles of AgNO3 are needed to react with one mole of Na2S. The products of the reaction are two moles of NaNO3 and one mole of Ag2S.

The reaction can be better understood by considering the charges of the ions involved. Na2S contains two sodium cations (Na+) and one sulfide anion (S2-). AgNO3 contains one silver cation (Ag+) and one nitrate anion (NO3-). When the two compounds are mixed, the sodium cation (Na+) and the silver cation (Ag+) switch places, forming NaNO3 and Ag2S. The sulfide anion (S2-) and the nitrate anion (NO3-) remain unchanged.


In conclusion, the ionic reaction between Na2S and AgNO3 is a double displacement reaction that results in the formation of two new compounds: NaNO3 and Ag2S. The chemical equation for the reaction is Na2S + 2AgNO3 → 2NaNO3 + Ag2S. The reaction involves the exchange of ions between the two compounds, with the sodium cation (Na+) and the silver cation (Ag+) switching places. The reaction is an important example of a double displacement reaction and is commonly used in the laboratory for various purposes.

To know more about chemical equation visit:

brainly.com/question/23877810

#SPJ11

The technique commonly used to detect abnormalities in the brain, as seen in Grey's Anatomy and Concussion, is MRI.

MRI, or magnetic resonance imaging, is a non-invasive technique that uses a powerful magnetic field and radio waves to create detailed images of the brain. It is commonly used in medical settings to diagnose a range of conditions, including tumors, strokes, and brain injuries. In Grey's Anatomy, MRI is often used by the doctors to visualize the brain and diagnose various conditions. In Concussion, MRI is used to show the effects of repeated head trauma on football players. MRI is a safe and effective way to detect abnormalities in the brain and can provide valuable information for diagnosis and treatment.

A type of scan known as magnetic resonance imaging (MRI) uses radio waves and powerful magnetic fields to produce precise images of the body's interior. A X-ray scanner is an enormous cylinder that contains strong magnets.

know more about MRI, here:

https://brainly.com/question/30008635

#SPJ11

The new pH of the solution after adding 50 ml of 1.00 M NaOH is approximately 1.32.

Acetic acid (HC₂H₃O₂) is a weak acid that partially dissociates in water, forming hydrogen ions (H⁺) and acetate ions (C₂H₃O₂⁻). The equilibrium expression for the dissociation of acetic acid is:

HC₂H₃O₂ ⇌ H⁺ + C₂H₃O₂⁻

Ka = [H⁺] * [C₂H₃O₂⁻] / [HC₂H₃O₂]

Ka = 10^(-pKa)

Ka = 10^(-4.8) ≈ 1.58 × 10^(-5)

Since acetic acid is the only source of hydrogen ions (H⁺) in the solution, we can consider the initial concentration of hydrogen ions to be equal to the initial concentration of acetic acid:

[H⁺] = [HC₂H₃O₂] = 0.05 moles / 1 liter = 0.05 M

pH = -log([H⁺])

pH = -log(0.05) ≈ 1.30

Therefore, the initial pH of the acetic acid solution is approximately 1.30.

Since NaOH is a strong base, it fully dissociates in water, providing hydroxide ions (OH⁻). The neutralization reaction between acetic acid and sodium hydroxide can be represented as follows:

HC₂H₃O₂ + OH⁻ → H₂O + C₂H₃O₂⁻

To calculate the new concentration of acetate ions, we divide the moles of acetate ions by the total volume of the solution (1 L + 0.050 L):

[C₂H₃O₂⁻] = 0.050 moles / 1.050 L = 0.0476 M

pH = -log([H⁺])

pH = -log(0.0476) ≈ 1.32

Learn more about solution pH here:

https://brainly.com/question/26424076

#SPJ11

To convert pressure from atm (atmospheres) to mmHg (millimeters of mercury), you need to use the conversion factor of 1 atm = 760 mmHg. This conversion factor is based on the standard atmospheric pressure at sea level.

To convert 0.950 atm to its equivalent in mmHg, you can multiply the given value by the conversion factor:

0.950 atm * 760 mmHg/atm = 722 mmHg

Therefore, 0.950 atm of pressure is equivalent to 722 mmHg.

This conversion is commonly used in various scientific and technical fields to express pressure in different units. The unit mmHg, also known as torr, represents the pressure exerted by a column of mercury that is 1 millimeter in height. It is a widely used unit for measuring pressure in laboratory experiments and medical applications. Understanding and converting between different pressure units is important for accurate measurements and comparisons. By using conversion factors like the one mentioned above, you can easily convert pressure values from one unit to another, allowing for consistency and compatibility in scientific calculations and measurements.

To learn more about  atmospheric pressure click here:

brainly.com/question/28310375

#SPJ11

v

The role of a forensic entomologist in a homicide investigation is to study the insects and other arthropods associated with a corpse in order to provide valuable insights into the postmortem interval (PMI), circumstances surrounding death, and potential movement or tampering with the body. Here are some key aspects of their role:

Now, moving on to the stages of decomposition of a corpse, which can be divided into four general stages:

It's important to note that the rate and progression of decomposition can be influenced by factors such as temperature, humidity, presence of insects, burial, and other environmental conditions. Forensic entomologists consider these factors alongside insect activity to estimate the PMI and provide valuable information in homicide investigations.

[tex]\huge{\mathcal{\colorbox{black}{\textcolor{lime}{\textsf{I hope this helps !}}}}}[/tex]

♥️ [tex]\large{\textcolor{red}{\underline{\texttt{SUMIT ROY (:}}}}[/tex]

The heat capacity of the bomb calorimeter is -1.695 kJ/°C

To solve for the heat capacity of the bomb calorimeter, we can use the formula:

Q = CΔT

where Q is the heat released by the combustion of oleic acid, C is the heat capacity of the calorimeter, and ΔT is the change in temperature of the calorimeter.

First, we need to find the amount of heat released by the combustion of oleic acid:

Q = (-39.4 kJ/g) x (1.54 g) = -60.676 kJ

The negative sign indicates that the reaction is exothermic (releases heat).

Next, we can plug in the values for Q and ΔT:

-60.676 kJ = C x 35.8°C

Solving for heat capacity, C:

C = -60.676 kJ / 35.8°C

C = -1.695 kJ/°C

Learn more about heat capacity here: https://brainly.com/question/21406849

#SPJ11

In making a transition from state n = 1 to state n = 2, the hydrogen atom must absorb a photon of 10.2 eV.

In making a transition from state n = 1 to state n = 2, the hydrogen atom must absorb a photon of 10.2 eV. This is because the energy of the photon is equal to the difference in energy between the two states, which can be calculated using the formula:
E = (Rhc)/n^2
where E is the energy, R is the Rydberg constant, h is Planck's constant, c is the speed of light, and n is the energy level.

Substituting the values for n = 1 and n = 2,

we get:
E = [(1.097 x 10^7 m^-1) x (4.14 x 10^-15 eV.s) x (3 x 10^8 m/s)] x [(1/1^2) - (1/2^2)]
E = 10.2 eV
To know more about transition, visit:

https://brainly.com/question/14274301

#SPJ11

The term that refers to the resistance of a liquid to flow is viscosity. The word "viscosity" i.e. option c, describes a liquid's reluctance to flowing.

Viscosity is a metric for a fluid's flow resistance. It speaks of the internal friction of a fluid in motion. Because of the high internal friction caused by its molecular structure, a fluid with a high viscosity resists motion. Low viscosity fluids flow freely because their molecular structure causes little to no friction when they are in motion.

Think of a foam cup that has a hole on the bottom. The cup will drain extremely slowly if I add honey to it later. This is due to the fact that honey has a high viscosity relative to other liquids. For instance, the cup will drain considerably more quickly if I fill the same cup with water.

Viscosity also exists in gases, however it is less obvious in typical situations.

Hence, the answer is option c i.e. viscosity.

Learn more about viscosity at https://brainly.com/question/30759211

#SPJ11

The balanced half-reaction in basic solution is:

[tex]IO3^{-aq} + 6H2O(l)[/tex]→[tex]3I2(s) + 6OH^{-aq}[/tex]

To balance the half-reaction, we need to ensure that the number of atoms and charges are balanced on both sides. In this case, we start with IO3^-(aq) on the left side and I2(s) on the right side. We first balance the atoms by adding water molecules (H2O) and hydrogen ions (H^+) to the appropriate sides. Next, we balance the charges by adding hydroxide ions (OH^-) to the side that requires additional negative charges. After balancing, we obtain the balanced half-reaction:

IO3^-(aq) + 6H2O(l) → 3I2(s) + 6OH^-(aq)

Learn more about Half-reaction

brainly.com/question/32305712

#SPJ11

The final temperature of the iron if mass of iron is 5 kg and the initial temperature is 300°C is 393.5°C.

The given problem can be solved using the specific heat capacity of iron which is 0.45 J/g°C. This means that 0.45 Joules of heat is required to increase the temperature of 1g of iron by 1°C. Given below is the solution for the problem:

Difference in temperature, ΔT = T₂ - T₁ = ?

Heat lost, Q = 5 kcal = 5000 calories = 20,925 J (1 cal = 4.184 J)

The heat lost by the iron is equal to the heat gained by the surrounding. Hence, we can use the formula:

Q = mcΔT

where Q is the heat lost, m is the mass of the iron, c is the specific heat capacity of iron and ΔT is the difference in temperature.

Substituting the values,

20,925 = 5 × 1000 × 0.45 × ΔT

ΔT = 93.5°C

Therefore, the final temperature of the iron is:

T₂ = T₁ + ΔT

T₂ = 300°C + 93.5°C

T₂ = 393.5°C

Thus, the final temperature of the iron is 393.5°C.

Learn more about temperature: https://brainly.com/question/31660521

#SPJ11

The mass of glucose in the 155 mL sample of a 1.22 M glucose solution is approximately 21.2 g.

To calculate the mass of glucose in a 155 mL sample of a 1.22 M glucose solution, we need to use the formula:

Mass = Volume x Concentration x Molar Mass

Given:

Volume of solution (V) = 155 mL

Concentration of glucose (C) = 1.22 M

The molar mass of glucose (C6H12O6) is calculated as follows:

(6 x atomic mass of carbon) + (12 x atomic mass of hydrogen) + (6 x atomic mass of oxygen)

Atomic masses:

Carbon (C) = 12.01 g/mol

Hydrogen (H) = 1.008 g/mol

Oxygen (O) = 16.00 g/mol

Now we can substitute the values into the formula and calculate the mass:

Mass = 155 mL x 1.22 mol/L x [(6 x 12.01 g/mol) + (12 x 1.008 g/mol) + (6 x 16.00 g/mol)]

Learn more about mass of glucose

brainly.com/question/4510052

#SPJ11

Ag⁺ + 2NH₃ → [Ag(NH₃)2]²⁺

Ni²⁺ + 4CN⁻ → [Ni(CN)4]²⁻

The formulas for the complexes formed between Ag⁺ and NH₃, with a coordination number of 2, is [Ag(NH₃)2]²⁺and Ni²⁺ and CN⁻  with a coordination number of 4, is  [Ni(CN)4]²⁻.

Is the coordination number of the complexes are 2 and 4 respectively?

In first complex, two ammonia (NH₃) molecules act as ligands and coordinate with the central silver (Ag⁺) ion. The coordination number represents the number of ligands attached to the central metal ion.So, the coordination number of the complex  [Ag(NH₃)2]²⁺ between Ag⁺ and NH₃ is 2.

In second complex, Ni²⁺, interact with ligands, such as CN⁻, through coordinate bonds. In this case, the complex formed between Ni²⁺ and CN⁻ has a coordination number of 4, indicating that four CN⁻ligands surround the central Ni²⁺ ion.

Coordination complexes play a significant role in chemistry, particularly in fields such as coordination chemistry and bioinorganic chemistry. These complexes are formed when metal ions interact with ligands, which can be ions or molecules capable of donating electrons to the metal ion.

Learn more about:Coordination number

brainly.com/question/27289242

#SPJ11

94.2 MHz is the frequency at which it is broadcasting" indicates that a certain broadcasting station is transmitting electromagnetic waves at a frequency of 94.2 megahertz (MHz).

An example οf electrοmagnetic radiatiοn is radiο waves. The wavelength οf a radiο wave is substantially greater than that οf visible light. Radiο waves are widely used by peοple fοr cοmmunicatiοn. Bοth rectangular and circular antennas are used by this radiο tοwer tο send and receive radiο frequency energy.

The electrοmagnetic spectrum's lοngest wavelengths, which are fοund in radiο waves, are nοrmally fοund at frequencies οf 300 gigahertz and belοw. The wavelength fοr 300GHz is 1mm, which is shοrter than a grain οf rice.

The phοtοn's energy, 6.24x10-29 kJ, is supplied tο yοu.

E is energy, h is Planck's cοnstant, and v is frequency, and we apply this equatiοn: E = hv.

6.24x10-29 kJ = 6.626x10-34 J-sec * ν

ν = 6.24x10-29 kJ x 1000 J/kJ  / 6.626x10-34 Jsec

ν = 9.42x107 Hz

9.42x107 Hz x 1 MHz/106 Hz = 94.2 MHz

To learn more about Radio waves  :

https://brainly.com/question/29787341

#SPJ4

The final product of the decay process is Argon (Ar).

The initial decay of [tex]^{41}Ca[/tex] electron capture results in the formation of a new nucleus. This new nucleus then undergoes alpha decay, emitting an alpha particle (⁴He nucleus).

Given that  [tex]^{41}Ca[/tex] decays by electron capture and the subsequent product undergoes alpha decay, we can determine the final product by subtracting the atomic number of the alpha particle (2) from the atomic number of the intermediate nucleus.

The atomic number of  [tex]^{41}Ca[/tex] is 20. When an alpha particle (atomic number 2) is emitted, the resulting final product will have an atomic number of 20 - 2 = 18.

The element with atomic number 18 is Argon (Ar).

Therefore, the final product of the two-step decay process of  [tex]^{41}Ca[/tex], where it undergoes electron capture followed by alpha decay, is Argon (Ar).

Learn more about radioactive decay here:

https://brainly.com/question/28559481

#SPJ4

The complete question is:

 [tex]^{41}Ca[/tex] decays by electron capture. The product of this reaction undergoes alpha decay. What is the final product of this two-step process?

a) Ar

b) Cl

c) Ca

d) Sc

e) Ti

Explanation:

Dipole-dipole interaction: The chloromethane molecule has a positive charge and the chloride anion has a negative charge. This interaction causes the molecules to attract each other.

The intermolecular forces between a bromide anion and a hydrogen chloride molecule involve ion-dipole interactions, specifically a strong electrostatic attraction between the negatively charged bromide ion and the partially positive hydrogen in the hydrogen chloride molecule.

When a bromide anion ([tex]Br^-[/tex]) interacts with a hydrogen chloride (HCl) molecule, the dominant intermolecular force at play is an ion-dipole interaction. The bromide anion carries a negative charge, while the hydrogen chloride molecule has a polar covalent bond, with the hydrogen end being partially positive and the chloride end partially negative.

As a result, the positive hydrogen in the HCl molecule is attracted to the negatively charged bromide ion. This electrostatic attraction between the ion and the dipole creates a relatively strong intermolecular force. The strength of the ion-dipole interaction depends on the magnitude of the charges involved and the distance between them.

In the case of a bromide anion and a hydrogen chloride molecule, the force is strong due to the relatively high charge on the bromide ion and the close proximity between the positive hydrogen and the negatively charged ion. This interaction is significant in many chemical processes, such as in the dissolution of ionic compounds in polar solvents or in reactions involving ions and polar molecules.

Learn more about intermolecular forces here:

https://brainly.com/question/31797315

#SPJ11

To determine the mass of the correct reagent that needs to be added to the buffer solution with a pH of 4.10, additional information is required.

The concentration of the reagent that needs adjustment and its desired concentration need to be known. Without this information, it is not possible to calculate the mass of the correct reagent.

To calculate the mass of the correct reagent to be added, we need to know which reagent needs adjustment and its desired concentration. In this case, the pH of the buffer solution is given as 4.10, but the information regarding which reagent needs adjustment is missing.

A buffer solution consists of a weak acid and its conjugate base or a weak base and its conjugate acid. The concentration of the reagent that needs adjustment and its desired concentration must be known in order to determine the amount of reagent to add.

Without the specific reagent and its desired concentration, it is not possible to calculate the mass of the correct reagent that needs to be added. Additional information is required to perform the necessary calculations.

Learn more about buffer solution here: brainly.com/question/31428923

#SPJ11

The empirical formula of the hydrocarbon is CH₂, indicating that the hydrocarbon contains one carbon atom and two hydrogen atoms.

To determine the empirical formula of the hydrocarbon, we need to find the simplest whole-number ratio between the moles of carbon and hydrogen.

Moles of carbon (C) = 0.010 mol

Moles of hydrogen (H) = 0.0150 mol

1. Calculate the mole ratio between carbon and hydrogen:

Moles of carbon / Moles of hydrogen = 0.010 mol / 0.0150 mol = 0.6667

2. Convert the mole ratio to the nearest whole-number ratio:

Since we want to find the simplest whole-number ratio, we can multiply both moles by a factor to obtain a whole number. In this case, multiplying by 3 gives us:

0.6667 × 3 ≈ 2

The empirical formula of the hydrocarbon can be represented as CH₂, indicating that for every two moles of hydrogen, there is one mole of carbon.

To know more about hydrocarbon  visit:

https://brainly.com/question/7509853

#SPJ11