It is important not to rotate the crankshaft after the 'corrosion preventive mixture' has been put into the cylinders on engines prepared for storage because 'the seal of the corrosion preventive mixture will be broken.
Corrosion preventive mixture refers to the mixture that is put in place to prevent the occurrence of corrosion. Corrosion preventive mixtures are designed to protect substrates, materials, and metallic structures from the deterioration that results from the chemical or electrochemical interaction of a substance with its immediate surroundings. It can be stated as corrosion preventive mixtures refer to the solutions used in industries to protect against the depletion of the mechanical, chemical, and physical properties of a material that is normally caused by corrosion. Corrosion prevention mixtures are used in industries to maintain the effectiveness, safety, and reliability of materials. It also helps to reduce the expensive replacement processes required in case corrosion occurs.
You can leran more about corrosion at
https://brainly.com/question/489228
#SPJ4
What is the correct way to mark False Starts in Full Verbatim?
The use of double dashes is the correct way to mark False Starts in Full Verbatim.
How do you appropriately double dashes?Double dashes are used to distinguish the beginning and finish of a sequence that would otherwise be misunderstood. In dialogue, dashes are also used to indicate when a sentence has been cut off.
To indicate a range or that material has been incorporated into a statement, dashes can be used in place of parenthesis. Only in casual writing should dashes be used; in academic and business writing, commas, parenthesis, or colons should be used instead. A space should not come before or after a dash.
Therefore, False Starts should be marked in Full Verbatim with double dashes.
Learn more about the double dashes, refer to:
https://brainly.com/question/15820849
#SPJ6
Which of these parts serves as the front-end cross structure on most vehicles?
A. Front lower rail
B. Radiator core support
C. Front upper rail
D. Apron
'Radiator core support' part serves as the front-end cross structure on most vehicles. Hence, option B 'radiator core support' is the correct answer.
What is the 'Front-End Cross Structure' of Vehicles?
The front-end cross structure of automobiles is referred to the several frontal parts that are located at the front of vehicles and that define their appearance and their effective workability and running. The radiator core support is one of the front-end cross structures that acts as extra protection for the radiator of vehicles by holding it securely in place and to the engine. If any part of the front support of the radiator core is damaged, it might interfere with the cooling system, that in turn can lead to a host of other expensive issues that are best avoided at all costs.
You can leran more about front-end cross structure at
https://brainly.com/question/23507618
#SPJ4
assign is teenager with true if kidage is 13 to 19 inclusive. otherwise, assign is teenager with false.
We use C programming to assign is teenager with true if kidage is 13 to 19 inclusive.
What is C programming?
With a static type system and support for structured programming, lexical variable scope, and recursion, C is an imperative procedural language. It was intended to be compiled, with minimal runtime support, to offer low-level memory access and language constructs that efficiently map to machine instructions.
Code for the given problem:
#include<stdio.h>
#include<stdbool.h>
int main(void){
bool isTeenager;
int kidAge;
scanf("%d",&kidAge);
//Below line initializes the isTeenager variable to //it's corresponding value using ternary operator.
isTeenager = (kidAge>=13 && kidAge<=19) ? true : false;
if(isTeenager){
printf("Teen\n");
}
else{
printf("Not teen\n");
} }
Output:
18
Teen
27
Not teen
Learn more about C programming clcik here:
https://brainly.com/question/23275071
#SPJ4
technician a says that fuel pump modules are spring-loaded so that they can be compressed to fit into the opening. technician b says that they are spring-loaded to allow for expansion and contraction of plastic fuel tanks. who is right?
According to Technician A, fuel pump modules are spring-loaded so they can be compressed to fit the aperture.
Electric fuel pumps are often mounted in the fuel tank to utilize the fuel in the tank to cool the pump and ensure a steady supply of fuel. Each injector has a spring-loaded valve that is kept closed by the force of the spring. The valve doesn't open until fuel is squirted into it. The fuel pump driver module controls the voltage supplied to the fuel pump in a vehicle. By adjusting voltage, the module ensures ideal fuel pressure and flow to the engine throughout its entire operating range.
Learn more about voltage here-
https://brainly.com/question/29445057
#SPJ4
refrigerant-134a enters a compressor at 200 kpa as a saturated vapor with a flow rate of 0.45 m3 /min and leaves at 800 kpa. the power supplied to the refrigerant during compression process is 3 kw. what is the enthalpy of r-134a at the exit of the compressor?
The fluid's state at the outlet resembles that of a superheated vapor. The specific enthalpy's corresponding temperature is T=49.641 C.
Enthalpy is the unit used to describe the total amount of heat in a thermodynamic system with constant pressure. It's depicted as. Where E is the internal energy, P is the pressure, and E is the energy, H is defined as E + P + V. The degree of disorder in a thermodynamic system is measured by entropy. The First Law of Thermodynamics is used to model the compressor:
W+ m (h in - h out) =0
The following expression can be used to determine the mass flow rate:
The refrigerant's characteristics at the inlet are: Saturated Vapor, State
P=180 pka
Tsat=12.73
It is calculated as follows: m=0.053 kg/s
284.409 kJ/kg is the specific enthalpy at the outflow.
The fluid's state at the outlet resembles that of a superheated vapor. The specific enthalpy's corresponding temperature is T=49.641 C.
Learn more about superheated here-
https://brainly.com/question/15684012
#SPJ4
Assignment You must write an awk script that will generate a report when supplied input data in a specified format. Program Your awk script must compute summary data on the performance of sales associates for the company ""No-op Computing. ""
To produce a blank line, type print "" where "" denotes an empty string. To print a predetermined section of text, use a string constant like "Don't Panic" as one item.
If the double-quote characters are left out, our content will be regarded as an awk expression, and we will probably run into problems. By writing statements that specify text patterns to be looked for in each line of a document and the action to be taken when a match is found, a programmer can write brief but effective programs using the Awk utility. Most commonly, Awk is used to process and scan patterns.
Learn more about program here-
https://brainly.com/question/17363186
#SPJ4
a cylindrical rod 380 mm long and having a diameter of 10.0 mm is to be subjected to a tensile load. if the rod is to experience neither plastic deformation nor an elongation of more than 0.9 mm when the applied load is 24,500 n, which of the four metals or alloys listed below are possible candidates? justify your choice(s). (2 points)
Answer:
Steel
Explanation:
Aluminium and copper alloys are not viable options because their permissible strain is less than the rod's estimated strain.
What is Strain?When an object is stressed, the amount of deformation or lengthening is measured as strain. Strain is typically stated as a ratio or percentage of the original length, area, or volume of the object. In other terms, strain is the amount of deformation in relation to an object's initial size or shape.
Calculating the stress and strain that the cylindrical rod would encounter under the specified conditions and comparing it to the permitted stress and strain values for each material will help us choose which of the four metals or alloys listed below are likely choices.
Let's begin by determining the rod's cross-sectional area:
Area = πr^2 = π(5 mm)^2 = 78.54 mm^2
The stress can then be calculated by:
[tex]Stress = Force / Area = 24,500 N / 78.54 mm^2 = 312.5 MPa[/tex]
We must apply the following formula to determine the strain:
Elongation / Initial Length = Strain
Given that the elongation shouldn't be greater than 0.9 mm:
Strain = 0.9mm/380mm =0.00237
Now that we have the stress and strain values and the permissible values for each material, we can compare them:
Allowable strain in aluminium alloy is 0.003 and allowable stress is 275 MPa.Steel alloy: 450 MPa of stress and 0.002 of strain are permitted.Copper alloy: 205 MPa of stress and 0.0035 of strain are permitted.Allowable stress for titanium alloy is 880 MPa, while allowable strain is 0.002.Therefore, due to their permissible stress and strain being more than or equal to that calculated for the cylindrical rod under the specified conditions, both the steel alloy and titanium alloy are potential options based on the comparison made above.
Learn more about Strain, here:
https://brainly.com/question/17156378
#SPJ2
A series rlc circuit consists of a 231 ω resistor, a 14. 3 mh inductor, a 9. 71 μf capacitor, and an ac source of amplitude 39 v and variable frequency. The voltage source frequency is set to 6. 1 times the resonance frequency. Find the impedance of this circuit.
The value of impedance is 230,1 ohm.
The opposition to alternating current performed by the combined effect of resistance and reactance in a circuit is known as impedance. To determine the impedance, we can use this formula:
Z = [tex]\sqrt{R^{2} + (XL -XC)^{2} }[/tex]
From the scenario we know that
ω = 231
L = 14.3 Mh
C = 9.71 μf = 9.71 x 10⁻⁶
V = 39 V
F = 6.1
Firstly we calculate the amount of XL using this formula
XL = 2πfL
XL =2 x 3.14 x 6.1 x 14.3
XL = 0.55 Ω
Then, we also determine the value of Xc
Xc = 1/2πfC
Xc = 1/(2 x 3.14 x 6.1 x 9.71)
Xc = 1/ 371.97 = 0.0026 Ω
After that substitue all the value into the formula to find the impedance
Z = [tex]\sqrt{R^{2} + (XL -XC)^{2} }[/tex]
Z = [tex]\sqrt{231^{2}+(0.55-0.0026)^{2} }[/tex]
Z = [tex]\sqrt{53,361-0.300}[/tex]
Z = [tex]\sqrt{53,360}[/tex]
Z = 230,1
So, the value of impedandance is 230,1 ohm.
Learn more about the impedance at https://brainly.com/question/12994632
#SPJ4
generation of electricity in coal-burning power plants and nuclear power plants both involve . group of answer choices generation of fly ash production of large amounts of carbon dioxide none of the above heating water to produce steam which drives a turbine high-level radioactive waste
The enormous electrical generator, which produces the electricity, is driven by the revolving turbine shaft. For power plants that utilize various fuels, such coal, gas, or oil, the idea is the same.
These sizable pools of water or cooling towers are also found in numerous other power plants, such as coal-fired power plants. This resemblance arises from the fact that coal-fired and nuclear power plants both employ the same technique to convert heat into electricity. Chemical potential energy is converted into heat energy, light energy, and sound energy when coal is burned. The only energy used in the creation of electricity is thermal energy. According to the U.S. Energy Information Administration, coal, nuclear power, and natural gas made up the majority of the country's electricity generation in 2020.
Learn more about electricity here-
https://brainly.com/question/18071264
#SPJ4
an engineer has performed an experiment to study the effect of four factors on the surface roughness of a machined part. the factors are: a
the correct answer is the option (b).
Surface roughness is the measurement of the relative smoothness of a surface’s profile, calculated via the microscopic deviations in a surface's true form. The larger the deviation from its true form, the rougher the surface, whilst the smaller the deviation, the smoother the surface.A rougher finish cannot be achieved through machining. A secondary process like bead-blasting or tumbling is required. There is no one way to achieve a particular surface roughness as both the machining process and secondary finishing influence the surface roughness. Get in touch with a member of our team to discuss the optimal procedure for finishing your parts.
to learn more about surface roughness click the link below given:
brainly.com/question/27805243
a distribution transformer is near a home to convert high voltage from power station to wall outlets. the wall outlets have 120 v rms. the primary to secondary turn ratio in the transformer is 200:1. find the rms power station voltage in kv.
High voltages enable the transmission of power over long distances because, as was previously mentioned, they require less current to transmit a given quantity of power, which reduces line loss.
However, large voltages provide more risks, hence transformers are used to generate lower power close to the user. The primary and secondary coils are the two coils. In typical operation, the input voltage is applied to the primary, and the secondary generates the output voltage after transformation. The primary coil's magnetic field is not only trapped by the iron core, but also strengthened by the core's magnetization. Due to the AC input voltage, the secondary receives a time-varying magnetic flux that induces an AC output voltage.
Learn more about voltage here-
https://brainly.com/question/28632127
#SPJ4
how can we find the maximum power delivered from the fixed source and to the variable load? how can we find the maximum power delivered from the fixed source and to the variable load? when we find the equivalent resistance when we replace a load with a short circuit when we replace a load with an open circuit when we find the thevenin equivalent resistance as seen by the load and replace the load with this resistance
Consequently, RL=RTh is the need for maximal power dissipation over the load. In other words, the power dissipated across the load will be at its maximum if the value of load resistance is equal to the value of source resistance, or Thevenin's resistance.
According to the maximum power transfer theorem, when the load resistance is equal to the series resistance, the power transmitted to the load resistor is maximized. The critical point can be determined by evaluating the derivative of the power equation with respect to the load resistance. Define Equation 1 in relation to RL and set it equal to zero. Consequently, RL=RTh is the need for maximal power dissipation over the load. A crucial technique for successful system design is the maximum power theorem, also referred to as the maximum power transfer theorem.
To learn more about Thevenin's resistance click the link below:
brainly.com/question/12978053
#SPJ4
13. The type of building that can be built in an area would be covered in
O A. building permits.
O B. deed restrictions.
O C. sales contracts.
O D. zoning restrictions.
The two switches in the circuit seen in Fig. P7.6 are synchronized. The switches have been closed for a long time before opening at t = 0. a) How many microseconds after the switches are open is the energy dissipated in the 4 Ohm resistor 10% of the initial energy stored in the 6 H inductor? b) At the time calculated in (a), what percentage of the total energy stored in the inductor has been dissipated?
0.3 A is the calculated current. Because the sum of the currents entering and leaving the junction is equal, Kirchhoff's first law is based on the conservation of charge.
The algebraic sum of potential drops in a closed circuit must equal zero, according to Kirchhoff's second law.
The capacitors will begin charging through resistor 2 as soon as switch S is closed, and there won't be any current flowing through resistors 8 and 4.
As a result, I1=2/6
=3A,
I2=0,
and I3=0.
The charging of the capacitors will cease a long time after switch S is closed, but current will still flow through resistors 8 and 4.
Applying Kirchhoff's law, loops 1 and 2 are equal to (3/2)0.6
=0.9A and loop 3 is equal to
(0.90.6=0.3A).
Learn more about current here-
https://brainly.com/question/20756115
#SPJ4
assuming the tube surface to have a uniform temperature corresponding to that of the phase change, determine the water outlet temperature and total heat transfer rate for a water flow rate of 0.1 kg/s and an inlet temperature of 60 c. if h w 0.25 m, how long would it take to completely liquefy the paraffin, from an initial state for which all the paraffin is solid and at 27.4 c?
Time required to melt paraffin is [tex]t_{m} =4660s = 1.29 hours[/tex]
What is liquefaction?Liquefaction is the term for the phase transitions from solid to liquid (melting) and from gas to liquid (condensation, respectively). The temperature and pressure at which a solid transforms into a liquid is known as the melting point (sometimes referred to as the liquefaction point).The time taken to liquify the paraffin,
[tex]T= 27.4^{o}[/tex]
so, [tex]\frac{T-T_{0} }{T-T_{1} } = exp(\frac{-PidLb}{mxcp} )[/tex]
Here, the Reynolds number is donated by [tex]R_{eD}[/tex].
So, [tex]R_{eD}[/tex] = [tex]\frac{4m}{pi*D*m}[/tex]= [tex]\frac{4*0.1}{pi*0.025*467*10^{-6} }[/tex]
Therefore, [tex]R_{eD}[/tex] = 10,906
h = ?
Given, water flow rate = 0.1 kg/s
so, [tex]h = \frac{NneudK}{D} =\frac{k}{D} *00.023*R_{eD}^{4/5}* P^{0.3} _{o}[/tex]
=[tex]\frac{0.653}{0.025} *0.023*10906^{4/3} *2.99^{0.3}[/tex]
therefore, 'h' = [tex]1418\frac{w}{m^{2}* k}[/tex]
so, [tex]T_{0} =T-(T-T_{i})exp(\frac{piDlh}{mcp} )[/tex]
by substituting, we get
[tex]T_{0}=27.4-(27.4-60)exp(\frac{-pi*0.25*3*1418}{0.1*4185})[/tex]
Therefore, [tex]T_{0}=42.17^{o}[/tex]
As per the balance energy equation, we get
[tex]q=h_{i} C_{p} (T_{i} -T_{0} )=0.1*4185*(60-42.17) = 7500 watts[/tex]
with the help of balance energy, we can calculate the time required to melt paraffin
so, [tex]q*T_{m} = P_{v}h_{s} f[/tex]
[tex]=PL(wH-\frac{pid^{2} }{4})h_{s} f[/tex]
so, [tex]T_{m} =(770*3)* \frac{(0.25*\frac{0.25^{2} -pi}{4} *0.025)^{2}}{750} h_{s} f[/tex]
Therefore, time required to melt paraffin is [tex]T_{m} =4660 seconds= 1.29 hours[/tex]
To learn more about liquefaction, refer to
https://brainly.com/question/2836204
#SPJ4
What does The vehicle dashboard includes
Answer: The vehicle dashboard includes the speedometer, tachometer, fuel gauge, temperature gauge, oil pressure gauge, and voltmeter.
Explanation:
part c - spherical pressure vessel a spherical pressure vessel is required to contain 1.8 m3 of compressed natural gas at 22 mpa . if the tank is made of a516 grade 60 steel with a maximum normal stress 150 mpa , what is the required thickness of the tank wall?
The required tank wall thickness is 87.7668 millimeters.
Detailed explanation:
Given:
V=1.5 m3 is the vessel's volume.
P=22 MPa compressed natural gas is contained in a spherical pressure vessel.
In the event that the tank is constructed of A516 grade 60 steel with a 150 MPa maximum normal stress.
ie omax = 150 Mpa
Solution :
The vessel's diameter is determined by,
d/2 =√3v/4[tex]\pi[/tex]
d/2 =√3*.5/4*3.14
d/2=√0.358
d/2 =1.196m
Convert into mm,
d= 1.96*1000=1196.82mm
The wall tank's thickness is determined by,
t=pd/20
t=22*1196.82/2*150
t=26330.04/300
t=87.7668
Therefore, the required thickness of the tank wall is 87.7668 mm.
To learn more about pressure vessel refer to
https://brainly.com/question/13939740
#SPJ4
a w18x65 of a992 steel is laying on its side and is being bent about its weak or y-axis. assuming the member is only supported at its ends and is simply supported, what is the maximum span length it can have before it reaches its design moment capacity based on it plastic moment due to its self-weight only? (hint: do not apply a load factor since the self-weight is well-known.)
A framework for a shared understanding of the acceptable standards when contracting for structural steel is provided by the AISC Code of Standard Practice.
What is meant by AISC?The AISC created the American Institute of Steel Construction (AISC), a company-level accreditation for the manufacture and construction of structural steel. Companies that construct steel structures, such as buildings, bridges, and the parts of bridges and highways, are eligible for this certification.IS: 2062 - General Steel Purpose Specifications.AISC Certification looks at a company's QMS as a whole, going much beyond the minimal standards for product inspection. AISC-Certified businesses must have a comprehensive QMS that addresses every aspect of fabrication or erection, from quality objectives to employee development to product delivery.All errata to earlier printings have been incorporated into the most recent version of ANSI/AISC 360-16, which was published in March 2021 (the following errata lists also include updates to other sections of the 15th Edition Steel Construction Manual).To Learn more About AISC Code Refer To:
https://brainly.com/question/21497348
#SPJ4
What polymer is a package made of?
Answer:
polyethylene
Explanation:
The elasticity of polyethylene makes it an ideal material for food packaging. Polyethylene is used extensively in the automotive industry. Polyethylene is often used for manufacturing stock poly bags, zip lock bags, bottles, food containers, food crates, stretch film, tape, pallets and plastic sheeting.
Polythene is commonly used as a packaging material. The most common polyethylene types used in food packaging are high-density polyethylene (HDPE), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE).
Explanation:One of the most popular materials used in the food industry for packaging is petroleum plastics (synthetic polymers). Such polymers include polyethylene terephthalate (PET), low and high-density polyethylene (LDPE and HDPE respectively), polypropylene (PP), polyvinyl chloride (PVC), and polystyrene (PS). Paper, paperboard, and cardboard cartons are frequently used as packaging for products in stores as well as used in shipping. Corrugated cardboard, for example, has excellent structural stability for shipping, storing, and even marketing products.
a(n) ? is an intentionally constructed, low-impedance electrically conductive path designed and intended to carry current during ground-fault conditions from the point of grounding on a wiring system to the electrical supply source, and is intended to facilitate the operation of the overcurrent protective device or ground-fault detectors on a high-impedance system.
A effective ground-fault current path is an intentionally constructed, low-impedance electrically conductive path designed and intended to carry current during ground-fault conditions from the point of grounding on a wiring system to the electrical supply source.
Is earth an effective ground fault current path?Sticking the wire in the ground is not sufficient since the earth is not thought to be a reliable ground-fault current channel.The electrical system of a building or other structure is based on grounding.To give a fault current a secure path to travel, grounding is used.When installing switches, light fixtures, appliances, and receptacles, a complete ground route must be kept.The undesired current flow trips circuit breakers or blows fuses in a system that is correctly grounded.Through the use of a grounding bank, effective grounding maintains voltages within predetermined limits during a line-to-ground fault (short-circuit condition).To learn more about ground-fault current channel refer,
https://brainly.com/question/28498355
#SPJ4
the renewable composite insulation material must have the following characteristics: an overall uniform thickness less than or equal to one inch. a consistent internal composition. environmentally friendly and/or recyclable. must be economical. dimensions must not exceed the overall of the top of the heat box apparatus.
The correct anwser is that this does not exceed the overall off the top of renewable of the heat box.
Renewable Insulation introductionThe largest amount of energy consumed within the average home is related tomaintaining adequate climate control through heating and cooling systems. Toconserve energy and decrease expenses associated with climate control, properhome insulation techniques are required. Insulation technologies relating tomaterials and application have advanced throughout the home building industry withtime. The home building industry once relied on straw and newspaper for insulatingmaterial. The industry currently utilizes technology such as fiberglass and blownexpandable foam. Insulation material advancement is driven by consumersdemanding insulation material designed for high insulation value along with positiveoccupant health and environmental impact.
to know about the renewable click the link below:
brainly.com/question/3831884
a) what would if we tried to further accelerate a
Supersonic fluid with a
diverging diffuser?
If we tried to further accelerate a Supersonic fluid with a diverging diffuser, the pressure will decrease due to an increase in area. This can be described as :
dA/A = dP/ρV² (1-M²) for supersonic flow Mach Number, M: M > 11 - M² < 0 (dA/A) = -K (dP/ρV²)k = 1-M²
What is Supersonic Fluid?Supersonic flow fields have Mach numbers greater than one at every location. Supersonic flows are usually characterized by the presence of shock waves, which cause abrupt changes in flow characteristics and streamlines (in contrast to the smooth, continuous variations in subsonic flows).
Supersonic and subsonic relate to speeds that are faster or slower than the speed of sound, respectively. Supersonic means traveling faster than the speed of sound, which is 343.2 m/s (1,126 ft/s). Subsonic speeds are defined as anything moving slower than the speed of sound.
Learn more about supersonic:
https://brainly.com/question/8821985
#SPJ1
How many physically different ways are there to realize V.W.X four 2-input AND gates? Justify your answer.
Answer: 16
Explanation:
a half-wave rectifier circuit with a 500-q load operates from a 120-v (rms) 60-hz household supply through a 12-to-l step-down transformer. it uses a silicon diode that can be modeled to have a 0.7-v drop for any current. what is the peak voltage of the rectified output? for what fraction of the cycle does the diode conduct? what is the average output voltage? what is the average current in the load?
A sinusoidal waveform's average voltage (VAV) is calculated by multiplying the peak voltage value by the constant 0.637,which is equal to two divided by pi.
Explain about the Average output voltage?A waveform's level that is determined by the requirement that the region enclosed by the curve above it is exactly equal to the region enclosed by the curve below it.
The amount of power averaged throughout time is referred to as average power. By averaging the instantaneous power's time throughout a single cycle, we may determine average power.
By multiplying the peak value by 0.637 or the RMS value by 0.9, average or mean voltage and current values may be derived that can be used to calculate the same amount of power consumption as for analogous DC values. When converting from AC to DC, the average or mean value is frequently utilized (rectification).
To learn more about Average output voltage refer to:
https://brainly.com/question/15710971
#SPJ4
technician a says that dynamic voltage is the voltage (usually of a battery) that exists without a load being applied. technician b says that open circuit voltage (ocv) is the voltage of the power source (battery) with the circuit in operation. who is right?
The battery electrolyte's specific gravity can be used to test the status of charge of a battery cell in the most precise and direct manner possible.
The state of charge increases with the specific gravity of the electrolyte. Voltage is the difference in electric potential between a battery's two terminals. The unit of measurement for voltage is called a volt (V), after the battery's creator, John Volta. An electronic tool called a state-of-charge battery tester is made to check the life and rechargability of an electric battery. A battery's current charging status and voltage output can be provided by a state-of-charge tester, which can also look for any defects that might impair the battery's overall performance.
Learn more about battery here-
https://brainly.com/question/17377812
#SPJ4
a v-6 is being tested for starter amperage draw. the initial surge current was about 210 amperes and about 160 amperes during cranking. technician a says that the starter is defective and should be replaced because the current flow exceeds 200 amperes. technician b says that this is normal current draw for a starter motor on a v-6 engine. who is right?
This is a typical current draw for a starter motor on a v-6 engine, according to technician B.
What does a starter motor do?The starter motor is in charge of starting the engine during ignition and permitting the rest of the process. The starter motor engages and turns the engine over when the ignition is turned on, allowing the engine to inhale air. The starter is positioned low to the ground near the rear of the engine in a front-engine layout. The starter requires a strong electric current, which it obtains from the battery through thick wires. It cannot be turned on with a typical hand-operated switch since it needs a large switch to handle the enormous current. Labor costs should also be taken into consideration; they can range from $150 to $1,000. Costs for new starters might range from $80 to $350. A replacement starter for a typical vehicle costs about $500. It looks that your mechanic is billing you at the going cost for this service.
To learn more about starter motor refer to
https://brainly.com/question/17144616
#SPJ4
Make sure the file GuessNumber. Py is selected and open. Write loops that validate input at all places in the code where the user is asked to provide input. Comments have been included in the code to help you identify where these loops should be written. Execute the program. See if you can guess the randomly generated number. Execute the program several times to see if the random number changes. Also, test the program to verify that incorrect input is handled correctly. On your best attempt, how many guesses did you have to take to guess the correct number
To check the input, use an if/else or a try/except statement. Use a continue statement to move on to the next iteration if the input is invalid. Use a break statement to exit the loop if the input is correct.
The flag variable will initially be set to false and if we can determine that the input data is what we are expecting, the flag status can be set to true and we can determine what can be done next based on that. The validation can be done in two different ways, namely by using a flag variable or by using try or except. For specific data types, validation should strive to be as tolerant of various forms of input as possible.
Learn more about variable here-
https://brainly.com/question/13084948
#SPJ4
what best describes concrete? group of answer choices the matrix is cement and the particulates are sand and gravel it is a structural composite it is a laminate composite it is a fiber-reinforced composite
Pre-tensioning or post-tensioning procedures that apply compressive stress to the concrete result in prestressed concrete.
For a more flexible and long-lasting end result, steel tendons, such as high-strength wires or alloys, are stretched to reinforce the tension into the concrete substance. Families of importance and performance properties. To give the plastic a particular hue, pigments—insoluble organic or inorganic particles—are added to the polymer basis. Plasticizers are typically nonvolatile, high boiling, low molecular weight compounds that are added to a polymer to alter the mechanical properties and increase its processability, flexibility, and stretchability. Major Families & Performance Properties of Pigments. To give the plastic a particular hue, pigments—insoluble organic or inorganic particles—are added to the polymer basis.
Learn more about concrete here-
https://brainly.com/question/28903866
#SPJ4
n order to adjust the mix to increase the compressive strength, the water-to-cement ratio is reduced to 0.45. will the quantity of coarse aggregate increase, decrease, or stay the same?
The strength reduces as the w/c ratio rises. The typical w/c ratio needed to completely hydrate cement is 0.42.
Beyond this point, additional water makes concrete easier to work with for compaction but is not required for hydration. A larger water-to-cement ratio results in wider gaps between the cement aggregates, which affects the compaction. Consequently, rising moisture levels result in decreased concrete durability and compressive strength. In a variety of applications, mortar or concrete's fresh and hardened qualities are enhanced by chemical admixtures. Their inclusion may enable the water to cement ratio (w/c) to be decreased without compromising the mixture's workability.
Learn more about compression here-
https://brainly.com/question/26422390
#SPJ4
A brass rod 1.5 m long and 20mm diameter was found to deform by 1.9mm under tensile load of 40KN. Calculate the modulus of elasticity.
