Answer:
The average atomic mass includes all of the isotopes of that atom which exist in nature. Almost all elements have at least two isotopes which naturally occur. Recall that isotopes are atoms with the same atomic number (protons), but a different number of neutrons.
If you produce 35.7 grams of sodium chloride how many molecules of Chlorine gas were
needed?
2Na + Cl2 --> 2NaCl
(PLS HELP ASAP)
Explanation:
I did it in steps to help u to understand :)
PLEASE HELP
Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?
A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Answer:
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Explanation:
colors longest to shortest are
red green blue violet
longest wavelength to shortest:
radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays.
What is a precipitate?
1) A solid product of a chemical reaction that is in aqueous form.
2) A solid product of a chemical reaction that is not in aqueous form.
chapter 3 reactivity of metals mcq question and question and answer and important notes?
Answer:
resend again that question dear
draw the flow chart of production of silk from silk moth
please help....
no links or get reported
Too lazy to draw sorry lol.
#CarryOnLearning
I actually just looked it up via image search.
just copy by hand either of the flow charts.
if you can, use colors to fill. makes it more interesting to look at
and define a circle (or rather a few points on it) to draw it neatly. the defined points can later be transformed into the arrows.
Select the correct answer.
0.22 M
HCI
Unknown
LiOH
What is the concentration of the base (LIOH) in this titration?
1.0 ml
0.5 ml
Initial
burette
reading
Final
burette
reading
13.3 ml
18.5 ml
OA
0.16 M
ОВ.
0.15 M
OC. 0.22 M
OD
18 M
O E
0.5 M
Daset
Answer:
=0.15M
Explanation:
To get the moles of the unknown LiOH, calculate the number of moles of HCl in 12.3mL.
Using the stoichiometric coefficient, mole ratio 1:1.
This means that the number of moles is the same. This number of moles is contained in 18mL. Then Calculate the molarity (concentration) which is in 1000mL
See the explanation from the image I have shared with you for calculations.
What is the percent by volume of alcohol, in a solution containing 24 mL of alcohol dissolved in 90 mL of water?
Answer:
use this formula it will help u .
Explanation:
If 60 ml of ethanol is diluted to a final volume of 400 ml, you create a 35 % ethanol solution.
First, realize that you creating a solution with that contains a polar solute (ethanol) with a polar solvent (water). Remember that "like dissolves like."
If you pour 60 ml of ethanol in a volumetric flask, you add 340 ml of water to dilute this solution to a final volume of 400 ml.
Volumetric flasks are designed to make or dilute solutions to specified final volume.
Since you have 60 ml of ethanol in a total solution of 400 ml, the percentage of ethanol is 35 %.
This result is obtained in the following manner.
ml/400. ml. = .35
.35 x 100% = 35 %
A typical scuba tank has a volume of 11 liters and can support a diver for one hour. An adult breathes about 3 liters of air with each breath.
How can an 11-liter tank give a diver enough oxygen for one hour?
Answer:
The correct answer is - at high pressure a huge amount of gases can be stored in less volume.
Explanation:
We already know that pressure is inversely proportional to the volume of gas which means if we increase the pressure the volume of gas becomes less.
P = 1/V
So in the scuba divers tank, the oxygen is filled at very high pressure so the high amount of the oxygen can be filled in less volume and which will last for longer than a normal pressure tank can last.
A 10.0 L balloon contains helium gas at a pressure of 655 mmHg. What is the final pressure, in millimeters of mercury, if the final volume is 13.8 L? Please show your work in order to receive credit.
Answer:
474. 64 mm Hg
Explanation:
P1 = 655 mm Hg V1 = 10 LP2 = ? V2 = 13. 8 Lusing Boyle's Law that is
P1. V1 = P2. V2
655 × 10 = P2 × 13. 8
[tex]P2 = \frac{655 \times 10}{13.8} [/tex]
P2 = 474. 64 mm Hg
need help asap!!!
so i don’t necessarily need an answer just how to solve everything.
this is the first one:
calcium hydroxide + ammonium chloride
the instructions are attached to this question. i’m just not sure how to do everything. it doesn’t give me the products side only the reactants so how am i supposed to write and balance the equation?
Explanation:
とおふぉくぉをえおろとようおいおぽあおそ・
'」*とまっぉのもヴぉこぉぞぽ、こ、
Answer:
Ca(OH)2 + 2NH4Cl .................. CaCl2 + 2NH3 + 2H2O
A gas has density 2.41 g/liter at 25°C and 770 mm Hg. Calculate it's molecular mass (R = 0.0821 L atm.mol-1K-1
Answer:
Explanation:
Given : Density - 2.41 g/liter
Temperature - 25° C
Pressure : 770 mm Hg
R = 0.0821 L atm mol-¹K-¹
Find : Molecular mass of gas
Solution : Ideal gas equation with respect to density will be : PM = dRT. In the formula, P is pressure, M is molecular mass, d is density, R is gas constant and T is temperature.
Keeping the values in equation-
Pressure : 770 mm Hg = 1 atm
Temperature : 273 + 25 = 298 K
M = dRT/P
M = (2.41*0.0821*298)/1
M = 58.96 gram/mol
Thus, the molecular mass of gas is 58.96 gram/mol.
Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?
A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Answer:
For the wavelenth of light spectrum, I believe the order would be red visible light, infrared, microwaves and radio waves.
The weak base ionization
constant (Kb) for Clois
equal to:
A
B
[CIO-][H30+)
[HOCI]
[HCIO][OH-]
[CIO-]
Answer:
The answer would be [HCIO][OH-]
_________
[CIO-]
Explanation:
So, the answer would be (b).
A 20.0 mL solution of NaOH is neutralized with 24.1 mL of 0.200 M HBr. What is the concentration of the original NaOH solution
Answer:
0.241 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
HBr + NaOH —> NaBr + H₂O
From the balanced equation above,
The mole ratio of acid, HBr (nₐ) = 1
The mole ratio of base, NaOH (n₆) = 1
Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:
Volume of base, NaOH (V₆) = 20 mL
Volume of acid, HBr (Vₐ) = 24.1 mL
Concentration of acid, HBr (Cₐ) = 0.2 M
Concentration of base, NaOH (C₆) =?
CₐVₐ / C₆V₆ = nₐ/n₆
0.2 × 24.1 / C₆ × 20 = 1/1
4.82 / C₆ × 20 = 1
Cross multiply
C₆ × 20 = 4.82
Divide both side by 20
C₆ = 4.82 / 20
C₆ = 0.241 M
Therefore, the concentration of the NaOH solution is 0.241 M
True or false, The atomic number of an element is a whole number that decreases as you read across each row of
the periodic table from left to right.
Answer:
I believe it's false because the atomic number is the number of protons in the nucleus of an atom.
Tyndall effect example (any 2)
Answer:
1. Sunlight path becoming visible when lots of dust particles are suspended in the air such as light passing through the canopy of a dense forest.
2.When a torch is switched on in a foggy environment, the path of the light becomes visible.
If I have 9.7 moles of gas at a pressure of 0.12 atm and at a temperature of 46°C, what is the volume of the
container that the gas is in?
Answer:
2117.02 litres
Explanation:
Using the ideal gas equation as follows;
PV = nRT
Where:
P = pressure of the gas (atm)
V = volume of the gas (L)
n = number of moles (mol)
R = gas law constant (Latm/molK)
T = temperature (K)
According to the information given in this question,
P = 0.12 atm
V = ?
n = 9.7moles
T = 46°C = 46 + 273 = 319K
R = 0.0821 Latm/molK
Using PV = nRT
0.12 × V = 9.7 × 0.0821 × 319
0.12V = 254.04
V = 254.04 ÷ 0.12
V = 2117.02 litres
What is matter mad of?
Answer:
Matter is made up of many elements
Answer:
matter is made of smallest tiniest invisible particles.
Locations Cost of land Cost of equipment Cost of mining and reclamation Time taken to mine the area 1 $100,000 $10,000 $5,000 per day 30 days 2 $35,000 $6,000 $4,500 per day 45 days 3 $30,000 $7,500 $3,500 per day 120 days 4 $40,500 $8,000 $7,000 per day 65 days Considering all costs, which location will cost the least to the company to mine?
Answer:
Location 2 will cost the least to the company to mine.
Explanation:
a) Data and Calculations:
Locations Cost of land Cost of Cost of mining Time taken to
equipment and reclamation mine the area
1 $100,000 $10,000 $5,000 per day 30 days
2 $35,000 $6,000 $4,500 per day 45 days
3 $30,000 $7,500 $3,500 per day 120 days
4 $40,500 $8,000 $7,000 per day 65 days
Locations Cost of land Cost of Cost of mining Total
equipment and reclamation Costs
1 $100,000 $10,000 $150,000 ($5,000 * 30) $260,000
2 $35,000 $6,000 $202,500 ($4,500 * 45) $243,500
3 $30,000 $7,500 $420,000 ($3,500 * 120) $457,500
4 $40,500 $8,000 $445,000 ($7,000 * 65) $503,500
solve this question please!
I don't know the answer ?
gujarati (language)
Which expression is equal to f(x) · g(x)?
Answer:
C. x⁴ + 6·x³ - 12·x - 72
Explanation:
The given functions are;
[tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex]
g(x) = x³ -12
We have that [tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex] = [tex]f(x) =\sqrt{(x + 6)^2}[/tex] = (x + 6)
Therefore;
f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = (x + 6) × (x³ - 12)
(x + 6) × (x³ - 12) = x⁴ - 12·x + 6·x³ - 72 = x⁴ + 6·x³ - 12·x - 72
∴ f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = x⁴ + 6·x³ - 12·x - 72
Question 1 of 10 What would be a good description of what activating prior knowledge means? O
A. Prior to reading, look at the end of the book or article.
O B. Before you read, recall knowledge you already have about the subject.
O C. Before you read, think about what you hope to learn.
O D. Before reading, find other material that is similar to what you are going to read
Answer:
B
Explanation:
Because activating prior knowledge means getting what you already know on the subject.
effect of air and water on iron and zinc
Answer:
Rust
Explanation:
it does cool chemical things
`Answer is subscribe to XoX Snead on YT Explanation: b is the answer!!
Which describes the difference between a claim and a scientific claim?
Claims are based more on truth than scientific claims are.
Anyone can make a claim, but a scientific claim is backed by experimental evidence.
Claims are based on evidence and scientific claims are made by scientists.
Controlled experiments are used in claims, while scientific claims use multiple trials.
Answer:
B. Anyone can make a claim, but a scientific claim is backed by experimental evidence.
<3 Have a nice day!!
Answer:
the awnser is B i got it right
Explanation:
Which experiment led to the idea that atoms contain a nucleus?
Answer:
Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.
Explanation:
How does fluorine (F)differ from iodine(I)
A. Fluorine (F) has 3 more energy shells than iodine (I).
B. Fluorine (F) has 1 less energy shell than iodine (I).
C. Fluorine (F) has 1 more energy shell than iodine (I).
D. Fluorine (F) has 3 less energy shells than iodine (I).
Fluorine (F) and iodine(I) are the halogen elements that belong to group 17. They differ from each other as fluorine has 3 fewer energy shells than iodine. Thus, option D is correct.
What are halogen groups?Halogen is a nonmetallic element that belongs to group 17 and consists of six elements namely fluorine, bromine, tennessine, chlorine, astatine, and iodine.
They are diatomic and have 7 valence electrons in the outer shell, which makes them highly reactive and electronegative. The shielding effect is less in F than I due to the closer placement and attraction of the valence electron to the nucleus.
Fluorine differs from iodine as it has a smaller size with fewer energy shells than iodine. Iodine has five energy shells, whereas fluorine has two energy shells that make the difference of three shells between them.
Therefore, F and I differ from each other.
Learn more about fluorine and iodine here:
https://brainly.com/question/2005537
#SPJ5
How are the boiling point and freezing point of a solvent affected when a solute is added?
Both the boiling point and the freezing point decrease.
Both the boiling point and the freezing point increase.
The boiling point increases, and the freezing point decreases.
The boiling point decreases, and the freezing point increases.
Answer:
this can helps you know the answer
Answer:
C.) The boiling point increases, and the freezing point decreases.
Explanation:
How would an increased level of acetyl-CoA be expected to affect the pyruvate dehydrogenase reaction
Answer:
The pyruvate dehydrogenase kinase enzyme activity would increase, resulting in an inhibition of pyruvate dehydrogenase activity. ... An in vitro study shows that isocitrate dehydrogenase is activated in the citrate cycle.
Explanation:
which hybridization is found in CO2?
explain about brownian movement in your own word
Answer:
Brownian moment means zig-Zag motion of particals Randomly anywhere in the free space or in fluids
