Work of 790 J is done by stirring an insulated beaker containing
120g of water.
1. What is the change in the internal energy?
2. What is the change in the temperature of the water? (In
C°)

The average power necessary to move the 35 kg block up the frictionless 30° incline at 5 m/s is approximately 857.5 Watts, which is closest to 860 W.

To find the average power necessary to move the block up the incline, we can use the formula for power:

Power (P) = (Force * Distance) / Time

We need to find the force required to move the block up the incline. The force can be calculated using the component of the weight parallel to the incline, which is given by:

Force = Weight * sin(θ)

where:

Weight = mass * gravity

θ = angle of the incline

Mass (m) = 35 kg

θ = 30°

Velocity (v) = 5 m/s

First, let's calculate the weight:

Weight = mass * gravity

= 35 kg * 9.8 m/s^2

= 343 N

Now, let's calculate the force:

Force = Weight * sin(θ)

= 343 N * sin(30°)

≈ 171.5 N

Since the incline is frictionless, the force required to move the block is equal to the force parallel to the incline.

Next, we need to find the distance traveled up the incline. The distance can be calculated using the displacement formula:

Distance = velocity * time

Velocity (v) = 5 m/s

Time (t) = 1 second (assuming the block moves for 1 second)

Distance = 5 m/s * 1 s

= 5 m

Now, we can calculate the average power:

Power = (Force * Distance) / Time

= (171.5 N * 5 m) / 1 s

= 857.5 W

Therefore, the average power necessary to move the 35 kg block up the frictionless 30° incline at 5 m/s is approximately 857.5 Watts.

The average power necessary is approximately 857.5 Watts, which is closest to 860 W.

To know more about Power, visit

brainly.com/question/1634438

#SPJ11

The total energy of a system can be expressed as the sum of its kinetic energy and potential energy.

If a roller coaster train has a potential energy of PE and a kinetic energy of KE as it starts to travel downhill, its total energy is PE + KE. Once the roller coaster train gets closer to the bottom of the hill, its kinetic energy increases to KE2, and its potential energy decreases to PE2. When the train reaches the bottom of the track and is traveling along the ground, its kinetic energy is KE3.

Potential energy is the energy that is stored within an object. It is the energy that an object possesses due to its position in a force field or a system. This energy is also referred to as stored energy or energy of position. It has the ability to be converted into other forms of energy, such as kinetic energy or radiant energy.

Kinetic energy is the energy an object possesses as a result of its motion. It is directly proportional to an object's mass and the square of its velocity. As a result, the faster an object moves, the more kinetic energy it possesses. Kinetic energy is a scalar quantity, which means it has no direction. It is also a form of mechanical energy since it arises as a result of the motion of an object.

Total energy is the sum of all the different forms of energy present in a system. It is a scalar quantity that is conserved in a closed system. Total energy includes both kinetic energy and potential energy. Total energy is conserved in a closed system, which means that it cannot be created or destroyed; rather, it can only be transferred or converted from one form to another. Therefore, the total energy of a system can be expressed as the sum of its kinetic energy and potential energy.

To learn more about energy visit;

https://brainly.com/question/8630757

#SPJ11

The frequency of an electromagnetic wave with a wavelength of 17 cm is approximately 1.8 × [tex]10^9[/tex] Hz.

Electromagnetic waves are composed of oscillating electric and magnetic fields that propagate through space. The frequency of an electromagnetic wave refers to the number of complete cycles it completes per second, measured in hertz (Hz). The wavelength, on the other hand, represents the distance between two consecutive points in the wave that are in phase.

To calculate the frequency of an electromagnetic wave, we can use the formula:

frequency = speed of light / wavelength

The speed of light in a vacuum is approximately 3.00 × [tex]10^8[/tex] meters per second. However, it is important to convert the given wavelength of 17 cm into meters before applying the formula. One meter is equal to 100 centimeters, so 17 cm is equivalent to 0.17 meters.

Now, we can substitute the values into the formula:

frequency = (3.00 × 10^8 m/s) / (0.17 m)

= 1.8 × 10^9 Hz

Therefore, the frequency of an electromagnetic wave with a wavelength of 17 cm is approximately 1.8 × [tex]10^9[/tex] Hz.

Learn more about Frequency

brainly.com/question/29739263

#SPJ11

Therefore, the kinetic energy of the proton is K = eV, and the kinetic energy of the alpha particle is K = 2eV

A proton (q=+e) and an alpha particle (q=+2e) are accelerated by the same voltage V.

The answer is that the alpha particle gains the greater kinetic energy. This is because the kinetic energy is given by K=½mv².

The charge of the particle is irrelevant to its kinetic energy. But the mass of the alpha particle (4 amu) is greater than the mass of the proton (1 amu), so it needs more kinetic energy to reach the same velocity as the proton.

When particles are accelerated through a potential difference V, their kinetic energy is given by K = eV.  

Hence, the alpha particle gains twice the kinetic energy of the proton.

The explanation is simple.

Since the voltage is the same for both the particles, the alpha particle having a mass twice that of the proton will acquire more energy for the same voltage.

To know more about kinetic energy visit:

https://brainly.com/question/999862

#SPJ11

The brass rod would need to be heated to approximately 737°C to be 1.4% longer than its length at 25°C.

To determine the temperature at which a brass rod would be 1.4% longer than its length at 25°C, we can use the thermal expansion coefficient of brass. The thermal expansion coefficient of brass is typically around 19 × 10^(-6) per degree Celsius.

Let's denote the initial length of the brass rod at 25°C as L₀. The increase in length is given by ΔL = 1.4% of L₀.

ΔL = 0.014 * L₀

The change in length is related to the temperature change ΔT by the formula:

ΔL = α * L₀ * ΔT

Where α is the thermal expansion coefficient.

Substituting the values, we have:

0.014 * L₀ = (19 × 10^(-6) / °C) * L₀ * ΔT

Simplifying the equation, we find:

ΔT = (0.014 / (19 × 10^(-6) / °C))

ΔT ≈ 0.7368 × 10^3 °C

Therefore, the brass rod would need to be heated to approximately 737°C to be 1.4% longer than its length at 25°C.

To know more about thermal expansion coefficient, click here:

https://brainly.com/question/13260447

#SPJ11

Given, speed of light through a clear solid is 2.05 × 108 m/s. We need to find whether the given solid isA) zircon where n = 1.92, B) diamond where n = 2.42, or C) quartz where n = 1.46. Let us use Snell’s law of refraction to find out whether the given solid is zircon, diamond or quartz.

Snells law states that:n1 sin θ1 = n2 sin θ2,where n1 = refractive index of the medium in which the incident ray is travelling,n2 = refractive index of the medium in which the refracted ray is travelling,θ1 = angle of incidence, andθ2 = angle of refraction. The refractive index n is given by:n = c/vwhere c is the speed of light in vacuum and v is the speed of light in the given medium. Let the given medium be denoted by x. The speed of light through a clear solid, x is given as 2.05 × 108 m/s. The refractive index of the medium can be calculated as:n = c/v = 3 × 108/2.05 × 108 = 1.46≈ 1.46Now, we can calculate the critical angle for the given medium using the formula:θc = sin−1 (n2/n1),where n1 = refractive index of the medium in which the incident ray is travelling,n2 = refractive index of the medium in which the refracted ray is travelling.

Using the given options and their refractive indices, we get the following values for critical angles for zircon, diamond and quartz:Zircon:θc = sin−1 (1/1.92) = 30.27°Diamond:θc = sin−1 (1/2.42) = 24.41°Quartz:θc = sin−1 (1/1.46) = 41.81°Now, we can calculate the critical angle for the given medium using the formula:θc = sin−1 (n2/n1),where n1 = refractive index of the medium in which the incident ray is travelling,n2 = refractive index of the medium in which the refracted ray is travelling.Let the given medium be denoted by x and its refractive index be denoted by nx. Since the given medium is a clear solid, we can assume that the angle of incidence is zero (i.e. the incident ray is perpendicular to the surface of the solid).θ1 = 0°Hence, we get the following expression for the angle of refraction:θ2 = sin−1 (n1/n2 × sin θ1) = sin−1 (n1/n2 × 0) = 0°Therefore, the incident ray will not be refracted when it enters the given solid. Since no refraction occurs, we can conclude that the critical angle for the given solid is zero.

To know more about Snell’s law visit :

https://brainly.com/question/31432930

#SPJ11

The box is subject to a net force of 0.98 N on each side.

Given information:

Volume of cubic box = 4.6 × 10⁻² m³

Initial temperature = 20 °C

Final temperature = 194 °C

First, let's determine the mass of the air inside the cubic box.

The density of air is 1.2041 kg/m³ at 20 °C.

Thus, mass of the air

= density × volume

= 1.2041 kg/m³ × 4.6 × 10⁻² m³

= 0.05536 kg

Next, let's determine the initial pressure of air. At standard temperature and pressure (STP), pressure is 101.325 kPa (kilopascals) or 101325 Pa (pascals). At 20 °C, air density is slightly less than that at STP, so we can expect the pressure to be slightly greater.

Using the ideal gas law,

PV = nRT, where

P = pressure,

V = volume,

n = number of moles,

R = ideal gas constant, and

T = temperature, we can solve for pressure.

Rearranging the formula, we have:

P = nRT/V

The ideal gas constant, R = 8.31 J/(mol·K), and the molecular mass of air is approximately 29 g/mol (grams per mole).

Converting the volume of air to liters, we have 4.6 × 10⁻² m³ = 46 L

Initial pressure of air = 1.0332 × 10⁵ Pa × (0.05536 kg)/(29 g) × (8.31 J/(mol·K)) × (20 + 273.15) K/46 L

≈ 260.6 kPa

At 194 °C, using the same formula as before, we get a pressure of P = 1021.3 kPa. The change in pressure is therefore

ΔP = P - P₀

= 1021.3 kPa - 260.6 kPa

= 760.7 kPa

To find the net force on each side of the box, we need to use the formula for pressure,

P = F/A, where

P = pressure,

F = force, and

A = area.

We can rearrange this formula to solve for force: F = PA

We know the change in pressure, and we can assume that the volume of the box remains constant. Therefore, the net force on each side of the box can be determined using the following formula: F = ΔP × AAtmospheric pressure at sea level is approximately 101.3 kPa, so the difference in pressure is approximately 759.4 kPa. Since the box is cubic, each side has an area of A = L², where L is the length of one side. We can find L using the volume of the box,

V = L³:4.6 × 10⁻² m³

= L³L ≈ 3.59 × 10⁻² m

Thus, the area of each side of the box is approximately A = (3.59 × 10⁻² m)² = 1.29 × 10⁻³ m²

Now, we can calculate the net force on each side of the box:

F = ΔP × A= (759.4 × 10³ Pa) × (1.29 × 10⁻³ m²)

= 0.98 N

Therefore, the net force on each side of the box is 0.98 N.

Learn more about standard temperature and pressure (STP): https://brainly.com/question/30778889

#SPJ11

Therefore, the thermal conductivity of argon (CV,m = 12.5 J·K−1·mol−1, σ = 0.36 nm2) at 298 K is 137.7 mW/(m·K).

The thermal conductivity (λ) of a gas can be estimated by the kinetic theory of gases using the equation:λ = 1/3 × Cv, m × vλ = thermal conductivity Cv,m = heat capacity at constant volume v = average speed of the molecules

The equation to calculate the average speed of the molecules: v = √((8 × R × T) / (π × M))

Where, R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas. Here, we have to calculate the thermal conductivity of argon (CV,m = 12.5 J·K−1·mol−1, σ = 0.36 nm2) at 298 K.

So, let's plug in the values. v = √((8 × R × T) / (π × M))√((8 × 8.314 × 298) / (π × 0.04)) = 330.9 m/sλ = 1/3 × Cv,m × vλ = 1/3 × 12.5 × 330.9λ = 137.7 mW/(m·K)

More on thermal conductivity: https://brainly.com/question/14553214

#SPJ11

Answer:

Approximately [tex]58\; {\rm N\cdot C^{-1}}[/tex].

Explanation:

The electric field strength [tex]E[/tex] at a given position is equal to the electric force the field exerts on each unit of electric charge. Hence, the unit of the electric field would be newtons (unit of force) per coulomb (unit of charge.)

Electric field strength is also equal to the change in electric potential over unit distance. For example, in a uniform electric field, if the electric potential changes by [tex]\Delta V[/tex] over a distance of [tex]d[/tex], strength of the electric field would be [tex]E = (\Delta V) / d[/tex].

The electric field between two parallel plates is approximately uniform. Thus, the equation [tex]E = (\Delta V) / d[/tex] can be used to find the strength of that field.

In this question, magnitude of the potential difference between the two charged plates is [tex]\Delta V = 45\; {\rm V}[/tex] over a distance of [tex]d = 0.78\; {\rm m}[/tex]. Since this field is uniform, magnitude of the strength of this field would be:

[tex]\begin{aligned}E &= \frac{\Delta V}{d} \\ &= \frac{45\; {\rm V}}{0.78\; {\rm m}} \\ &\approx 58\; {\rm N\cdot C^{-1}}\end{aligned}[/tex].

(Note the unit conversion: [tex]1\; {\rm V} = 1\; {\rm J\cdot C^{-1}} = 1\; {\rm N\cdot m\cdot C^{-1}}[/tex].)

The magnitude of the electric field between the parallel plates is approximately 57.69 V/m. This indicates that for every meter of distance between the plates, there is an electric field strength of 57.69 volts.

The electric field between parallel plates is directly proportional to the potential difference and inversely proportional to the separation distance. This relationship is described by the formula E = V / d, where E is the electric field, V is the potential difference, and d is the separation distance.

The magnitude of the electric field between the parallel plates can be calculated using the formula:

Electric field (E) = Potential difference (V) / Separation distance (d)

Potential difference (V) = 45 V

Separation distance (d) = 0.78 m

Calculating the electric field:

E = V / d

E = 45 V / 0.78 m

E ≈ 57.69 V/m

Therefore, the magnitude of the electric field in the space between the plates is approximately 57.69 V/m.

By substituting the given values into the formula, we can calculate the electric field. In this case, the potential difference is 45 V, and the separation distance is 0.78 m. Dividing the potential difference by the separation distance gives us the magnitude of the electric field.

The magnitude of the electric field between the parallel plates is approximately 57.69 V/m. This indicates that for every meter of distance between the plates, there is an electric field strength of 57.69 volts.

To know more about Magnitude, visit

brainly.com/question/30337362

#SPJ11

The frequency of oscillation is 0.27 Hz & The total energy of oscillation of the raft (ignoring damping) is 0.000944 J.

Part A The frequency of oscillation of the raft can be calculated using the following formula,f = 1 / (2π) √(k / m)where,f is the frequency of oscillation of the raftk is the spring constant of the raftm is the mass of the raft + man (420 kg)

Rearranging the formula,we get:k = (2πf)²mOn the raft, the net upward force acting is equal to the weight of the displaced water. When the man stands on the raft, the weight of the raft + man is equal to the weight of the displaced water + weight of the man.Using the principle of floatation, we get:Weight of displaced water + Weight of man = Weight of the raft + man420g = (350 + w)g + 70g

Where,g is the acceleration due to gravity.w = 0.857 kgUsing this value of w, we can now calculate the spring constant of the raft,k = (2πf)²m= (2πf)²(420)= 882π²f²Hence,f = 0.27 Hz

Part B The total energy of oscillation of the raft can be calculated using the formula,E = 0.5 kA²where,E is the total energy of oscillation of the raftA is the amplitude of oscillation of the raftWhen the man stands on the raft, the raft sinks 3.0 cm deeper into the water. Hence, the amplitude of oscillation is 1.5 cm or 0.015 m.Substituting the values of k and A, we get,E = 0.5 kA²= 0.5 × 882π²f² × 0.015²= 0.000944 J Therefore, the total energy of oscillation of the raft (ignoring damping) is 0.000944 J.

To know more about oscillator visit :

https://brainly.com/question/30111348

#SPJ11

Cannot provide an answer without specific information about the circuit.

Without a specific circuit diagram or more information about the arrangement of the components, it is difficult to provide a specific explanation.

However, with the switch in an open position, it typically indicates that the circuit is not complete and there will be no flow of charges through the circuit. When the switch is open, it acts as a break in the circuit, preventing the flow of current. Therefore, the statements that are likely to be true are:

Please note that this is a general assumption based on the typical behavior of open switches in circuits. For a more accurate explanation, it is necessary to have a specific circuit diagram or further details about the circuit configuration.

Learn more about about the circuit

brainly.com/question/14287566

#SPJ11

The energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom is 8.44 x 10^-20 J.

Given that the transition of an electron from the n = 5

level to the n = 8 level of a hydrogen atom and

the energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom is to be calculated.

We know that the energy for the transition of an electron from the n = i level to the n = f

level of a hydrogen atom is given by the formula:ΔE = -2.18 x 10^-18 (1/nf² - 1/ni²)

where,ΔE = Energy for the transition of an electronn = Principal Quantum number

f = Final Statei = Initial state

Therefore, substituting the given values in the formula, we get;ΔE = -2.18 x 10^-18 (1/8² - 1/5²)ΔE = -2.18 x 10^-18 (1/64 - 1/25)ΔE = -2.18 x 10^-18 [(25 - 64)/1600]

ΔE = -2.18 x 10^-18 [- 39/1600]

ΔE = 8.44 x 10^-20 J

The energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom is 8.44 x 10^-20 J.

Learn more about electron

brainly.com/question/12001116

#SPJ11

(a) The average rate of change of area from 2 to 3 is 19.86, from 2 to 2.5 is 9.91, and from 2 to 2.1 is 6.74. (b) The instantaneous rate of change when r = 2 is 4π square units.

(a) The area of the circle A = πr². The derivative of A with respect to r is 2πr. The average rate of change is obtained by dividing the difference in the function by the difference in the independent variable. The difference in the independent variable is the final value minus the initial value.

Therefore, we can obtain the average rate of change of the area of a circle with respect to its radius r as r changes from 2 to 3 by:

ΔA/Δr = [π(3)² - π(2)²] / (3 - 2) = 19.86.

Similarly, the average rate of change of the area of a circle with respect to its radius r as r changes from 2 to 2.5 is:

ΔA/Δr = [π(2.5)² - π(2)²] / (2.5 - 2) = 9.91

and the average rate of change of the area of a circle with respect to its radius r as r changes from 2 to 2.1 is:

ΔA/Δr = [π(2.1)² - π(2)²] / (2.1 - 2) = 6.74

(b) We have found that the derivative of A with respect to r is 2πr. When r = 2, we have A'(2) = 2π(2) = 4π square units. Thus, the instantaneous rate of change when r = 2 is 4π square units.

Learn more about instantaneous rate here:

https://brainly.com/question/30760157

#SPJ11

The tension in the lifting cable when the submarine is entirely out of the water is [tex]1.96 * 10^{5}[/tex] N

Given, Density of the steel submarine, d1 = 7800 kg/m3 Density of water, d2 = 1000 kg/m3. Mass of the steel submarine, m = 20000 kg

The formula to find the tension in the lifting cable is given by, Tension in cable = Weight of the object being lifted - Buoyant force on the object(a) When the submarine is submerged in water of density 1000 kg/m3We know that, Weight = Mass x gravity.

Submerged weight of the submarine,

W1 = Volume of the submarine x Density of water x gravity

V1 = m / d1 = 20000 / 7800 = 20 / 7 m3

W1 = V1 x d2 x g = (20 / 7) x 1000 x 9.8 = 2.0 x 104 N

To calculate the buoyant force, Fb = V x d2 x g where V is the volume of the water displaced by the submarine.

Fb = V x d2 x g = m x g

= 20000 x 9.8

= [tex]1.96 * 10^{5}[/tex] N Tension in cable = Weight of the object being lifted - Buoyant force on the object. Tension in cable = W1 - Fb = 2.0 x 104 - [tex]1.96 * 10^{5}[/tex] = -[tex]1.96 * 10^{5}[/tex] N

Therefore, the tension in the lifting cable when the submarine is submerged in water of density 1000 kg/m3 is -1.76 x 105 N

The negative sign indicates that the tension is in the opposite direction of the force of gravity, which means the crane is lowering the submarine into the water.(b) When it is entirely out of the water

When the submarine is entirely out of the water, the buoyant force will be zero. Tension in cable = Weight of the object being lifted - Buoyant force on the object

Tension in cable = m x g = 20000 x 9.8 = [tex]1.96 * 10^{5}[/tex] N. Therefore, the tension in the lifting cable when the submarine is entirely out of the water is [tex]1.96 * 10^{5}[/tex] N

Since the buoyant force is zero, the tension in the cable is equal to the weight of the submarine.

For more information on tension kindly visit to

https://brainly.com/question/31591105

#SPJ11

To produce a stronger field in a long solenoid, you need to increase the number of turns of wire per unit length.

In a long solenoid, the magnetic field strength is directly proportional to the number of turns of wire per unit length. Increasing the number of turns of wire per unit length, therefore, increases the magnetic field strength. However, increasing the radius and length of the solenoid does not have the same effect.

Increasing the radius of the solenoid reduces the magnetic field strength at the center of the solenoid, while increasing the length of the solenoid only increases the magnetic field strength at the ends of the solenoid. Hence, if you want to produce a stronger magnetic field throughout the solenoid, increasing the number of turns of wire per unit length is the best option.

The magnetic field strength of a long solenoid is a uniform radial field, meaning that the magnetic field strength is the same at all points along the radial direction. Therefore, the field strength for the east radial field has only one peak, which is at the center of the solenoid.

Learn more about solenoid here:

https://brainly.com/question/9535280

#SPJ11

The equivalent resistance of a 60-Ohm resistor connected in parallel with a 20-Ohm resistor is 13.3 Ohms.

To determine the equivalent resistance of a combination of resistors connected in parallel, the following formula can be used:

Req=1/(1/R1+1/R2+...+1/Rn)

where Req is the equivalent resistance and R1, R2, ..., Rn are the resistances of the individual resistors connected in parallel.

Given that a 60-Ohm resistor is connected in parallel with a 20-Ohm resistor.Using the above formula we have;

Req=1/(1/60 + 1/20)

Calculate the individual reciprocals first.

1/60 = 0.01671/20 = 0.05

Substitute into the formula;Req = 1/(0.0167 + 0.05)Req = 13.3 ohms

Therefore, the equivalent resistance of the combination is 13.3 Ohms.

In summary, the equivalent resistance of a 60-Ohm resistor connected in parallel with a 20-Ohm resistor is 13.3 Ohms. The formula used in solving for the equivalent resistance is Req=1/(1/R1+1/R2+...+1/Rn).

To know more about equivalent resistance, visit:

https://brainly.com/question/31788815

#SPJ11

The half-life of Nickel-63 is 92 years. The sample will take approximately 10 half-lives to decay to 1 g, which is equivalent to 920 years

Therefore, we can calculate the amount of time required to reduce a 1 kg sample to about 1g. Half-life of Nickel-63 is 92 years. Thus, the first half-life means half the sample has decayed, leaving half the original amount.

Similarly, the second half-life means half of the remaining half has decayed, leaving a quarter of the original sample. Hence, the fraction of the sample that remains after N half-lives is (1/2)^N, where N is the number of half-lives that have passed.

To find the time to reduce the sample to 1 g from 1 kg, we can apply the following formula for the number of half-lives needed:Mass remaining = initial mass x (1/2)^NHere, the mass remaining is 1 g, and the initial mass is 1 kg.

Hence, we have:1g = 1 kg x (1/2)^N1/1000 = 1/2^Nlog 1/1000 = N log 1/2N = log 1000/log 2N = 9.9658The sample will take approximately 10 half-lives to decay to 1 g, which is equivalent to 920 years.

To know more about half-life refer here:

https://brainly.com/question/4318844#

#SPJ11

To start the box sliding along the surface in the positive x direction, a horizontal force greater than 49 N in the positive x direction must be applied.

The maximum static friction force can be calculated using the equation:

f_static_max = μ_static * N

where μ_static is the coefficient of static friction and N is the normal force acting on the box. In this case, since the box is on a horizontal surface, the normal force is equal to the weight of the box:

N = m * g

Substituting the given values:

N = 25 kg * 9.8 m/s² = 245 N

Now, we can determine the maximum static friction force:

f_static_max = 0.20 * 245 N = 49 N

This is the maximum force that can be exerted before the box starts sliding. Therefore, to overcome the static friction and initiate sliding in the positive x direction, a horizontal force greater than 49 N in the positive x direction must be applied. The exact value of the force will depend on the magnitude of the static friction and the force applied.

To know more about static friction refer here:

https://brainly.com/question/30886698#

#SPJ11

Complete Question:

A box with a mass of 25 kg rests on a horizontal surface. The coefficient of static friction between the box and the surface is 0.20. What horizontal force must be applied to the box for it to start sliding along the surface in the positive x direction? Use g = 9.8 m/s². O A horizontal force greater than 49 N in the positive x direction. O A horizontal force equal to 49 N in the positive x direction. O A horizontal force less than 49 N in the positive x direction. O A horizontal force that is either equal to or greater than 49 N in the positive x direction. O None of the other answers

The phenomenon called contraction is responsible for the great similarity in atomic size among adjacent members of transition element series.

The atomic size of elements decreases across a period from left to right because of the increase in the number of protons and electrons that are added to the atoms. As the positive charges in the nucleus increase, the negatively charged electrons are attracted more strongly, causing the electrons to be drawn closer to the nucleus, resulting in a decrease in atomic size.

The term "contraction" is used to describe this occurrence. There is a phenomenon known as the "lanthanide contraction" that occurs within the Lanthanide series. This phenomenon is described as a result of a decrease in atomic size in the series.

The 5f electrons in the actinide series are less efficient at shielding the increased nuclear charge, resulting in a greater contraction of the atomic size in the actinide series than in the lanthanide series. Therefore, the phenomenon of contraction in the transition element series is responsible for the great similarity in atomic size among adjacent members.

This is because the addition of an extra electron shell is equivalent to the addition of an extra proton, and the attraction of electrons to the nucleus causes atomic size to decrease. The magnitude of this contraction varies as we move from one transition element to the next, which is why there is only a small difference in size between adjacent members.

To know more about transition Atomic  visit :

https://brainly.com/question/11166120

#SPJ11

The speed of pigeon is approximately 12.2 meters per second.

To determine the speed of the pigeon, we can use the Doppler effect equation, which relates the observed frequency to the source frequency and the relative speed between the source and the observer. In this case, the observed frequency is 448 Hz, and the source frequency is 470 Hz.

The Doppler effect equation for sound can be written as:

f' = f(v + vo) / (v + vs)

Where:

Since the pigeon is flying away from the bell, its speed (vo) is positive, and the speed of sound (v) is a constant. We need to solve for the speed of the pigeon (vs).

Rearranging the equation, we get:

vs = f'v / (f' - f)

Substituting the given values, we have:

vs = (448 Hz)(343 m/s) / (448 Hz - 470 Hz)

Calculating this expression, we find that the speed of the pigeon is approximately 12.2 meters per second.

Learn more about Doppler effect

brainly.com/question/15318474

#SPJ11

A solution of 0.26 M HNO2 and 0.78 M LiNO2 is given.

Let's calculate the pH of this solution. HNO2 is a weak acid, while LiNO2 is a salt of a weak acid.

The overall reaction is:

HNO2 + LiNO2 ⟶ HNO2 + LiNO2 HNO2 is a weak acid that ionizes in water to form H+ ions and NO2- ions:

HNO2 + H2O ⟶ H3O+ + NO2-

The acid dissociation constant (Ka) of HNO2 is 4.5 × 10^-4.

The concentration of the H+ ion in a 0.26 M HNO2 solution is given by the equation:

[tex]Ka = [H+][NO2-]/[HNO2] [H+][/tex]

= Ka [HNO2] / [NO2-] [H+]

= 4.5 × 10^-4 × 0.26 / 0.26

pH = -log[H+]

pH = -log (4.5 × 10^-4)

pH = 3.35

LiNO2 dissociates in water to form Li+ ions and NO2- ions.

LiNO2 ⟶ Li+ + NO2-

The NO2- ions produced in the ionization of HNO2 and LiNO2 combine to form LiNO2. The solution's pH can also be calculated using the equation above.

To learn more about solution visit;

https://brainly.com/question/1616939

#SPJ11

Under balanced conditions, the current through the neutral wire of a Wye voltage source to a Wye load is indeed 0 A.

This can be demonstrated by analyzing the symmetrical nature of the Wye configuration and the cancellation of currents.

In a balanced Wye system, the line currents in the load are equal in magnitude and 120 degrees apart in phase. Each line current can be represented by I1, I2, and I3. These currents flow from the Wye voltage source to the load.

Now, let's consider the neutral wire. The neutral current is the algebraic sum of the line currents in the load. Since the line currents are equal in magnitude and 120 degrees apart in phase, their sum cancels out to zero. For example, I1 + I2 + I3 = 0.

As a result, under balanced conditions, the current through the neutral wire of a Wye voltage source to a Wye load is 0 A. This occurs due to the symmetrical configuration and phase relationship of the line currents, which result in their cancellation at the neutral point.

To know more about Wye voltage, click here:

https://brainly.com/question/31896286

#SPJ11

(a) The series of transitions by emitting photons are as follows:5g → 4f → 3d → 2p → 1s ; (b) The series of transitions by emitting photons are as follows:5d → 4f → 3d → 2p → 1s.

a) Suppose a hydrogen atom is in the excited 5g state, from which it makes a series of transitions by emitting photons. As the transition of an excited hydrogen atom takes place from higher energy levels to lower energy levels, the final energy level will be the ground state, where it remains stable and does not emit any photons.

The  diagram shows the allowed energy levels and transitions for a hydrogen atom. Where, E₁ to E₅ represents energy levels, and the lines indicate possible transitions from one energy level to another.

So, from the diagram we can see that an excited hydrogen atom in the 5g state can make the following series of transitions by emitting photons:5g → 4f → 3d → 2p → 1s. Here, the final transition 2p → 1s results in the emission of photons with a frequency of 1.23 x 10¹⁵ Hz.

b) Repeat part (a) if the atom begins in the 5d state: Similar to part (a), we can draw the energy levels and transitions for a hydrogen atom that starts in the 5d state.

The following diagram shows the allowed energy levels and transitions for a hydrogen atom that starts in the 5d state: Where E₁ to E₅ represents energy levels, and the lines indicate possible transitions from one energy level to another.

So, from the diagram, we can see that a hydrogen atom starting in the 5d state can make the following series of transitions by emitting photons:5d → 4f → 3d → 2p → 1s. Here, the final transition 2p → 1s results in the emission of photons with a frequency of 1.23 x 10¹⁵ Hz. Therefore, the answer is as follows:

(a) The series of transitions by emitting photons are as follows:5g → 4f → 3d → 2p → 1s

(b) The series of transitions by emitting photons are as follows:5d → 4f → 3d → 2p → 1s

To know more about emitting photons, refer

https://brainly.com/question/27781360

#SPJ11

the necessary electric field direction for the bee to hang suspended in the air is upward.

Given data:

Mass of bee, m = 0.10 g = 0.0001 kg

Charge on bee, q = 24 pC = 24 × 10^(-12) C

Electric field near surface of the Earth, E = 100 N/C

Electric force experienced by the bee, F = qE

Part A

We know that the weight of the bee can be calculated as:

w = mg = 0.0001 × 9.8 = 9.8 × 10^(-4) N

So, the ratio of electric force on bee to the bee's weight is:

F / w = (qE) / (mg) = (24 × 10^(-12) × 100) / (0.0001 × 9.8)≈ 2.45 × 10^(-9)

Part B

We know that the bee will hang suspended in the air if the electric force experienced by the bee is equal and opposite to the weight of the bee.

So, the electric field strength required to suspend the bee in air is given by:

E = (mg) / q = (9.8 × 10^(-4)) / (24 × 10^(-12))≈ 4.08 × 10^(7) N/C

Part C

For the bee to hang suspended in the air, the electric field should be directed upwards, opposite to the direction of gravitational force acting on the bee.

So, the necessary electric field direction for the bee to hang suspended in the air is upward.

learn more about electric field here

https://brainly.com/question/19878202

#SPJ11

The only solution is a1 = a2 = a3 = 0. Hence, B = {v1, v2, u} is linearly independent, so B is a basis of R3.

Let [tex]S = {v1, v2}[/tex]. We want to enlarge S to a basis of R3. Since S is linearly independent, we can add one vector u to S to get a spanning set for R3.

Since S has two vectors, we need to find one more vector to get a basis of R3. That is, we need to find a vector u in R3 such that S ∪ {u} is linearly independent.

We can write the augmented matrix of S as[tex][v1 v2] =  [1 -2 3 0 5 -3].[/tex]

Using Gaussian elimination on this augmented matrix, we get

[R1,R2,R3] = [1 -2 3 0 5 -3]

=>[1 -2 3 0 5 -3]

=> [1 -2 3 0 5 -3]

=> [1 -2 3 0 5 -3].

Thus, R3 is a pivot row and we can let

u = (1, -2, 0).

Now, we claim that the set [tex]B = {v1, v2, u}[/tex] is a basis for R3.

Since |B| = 3 = dim(R3), it suffices to show that B is linearly independent.

 We will assume that a1v1 + a2v2 + a3u = 0 for some scalars a1, a2, a3 in R.

We need to show that a1 = a2 = a3 = 0.  Since a1v1 + a2v2 + a3u = 0, we get the following system of linear equations:

a1 + 0 + a3

= 0 -2a1 + 5a2 - 2a3

= 0 3a1 - 3a2 + 0a3

= 0.

Hence, [tex]B = {v1, v2, u}[/tex] is linearly independent, so B is a basis of R3.

To learn more about solution visit;

https://brainly.com/question/1616939

#SPJ11

The amount of energy required to change one gram of a liquid, at its boiling point, to a gas is called its heat of vaporization. It is an endothermic process that is generally measured in joules (J) per mole (mol).

the correct option is D. Vaporization.

The heat of vaporization is the energy needed to convert a unit mass of liquid into a gas at a given temperature. It is a measure of the strength of the intermolecular forces in a liquid because it requires breaking these bonds to turn the liquid into a gas. The heat of vaporization varies among different liquids depending on their chemical structures. For instance, water has a high heat of vaporization due to hydrogen bonding between its molecules.

The heat of vaporization of water is 40.7 kJ/mol at 100°C, meaning it takes 40.7 kJ of energy to vaporize one mole of water at that temperature. Therefore, it is a useful property that can be utilized in the chemical and physical sciences to understand how different substances behave when exposed to varying conditions. Therefore, the correct option is D. Vaporization.

To know more about endothermic process visit

https://brainly.com/question/29555731

#SPJ11

The given statements explain the relationships between the moments of inertia (I₃, I₂, I₁) and the angular velocity components (w₁, w₂, w₃) in terms of torque and torque-free motion of a rigid body.

a) The z-component of torque (T₃) acting on the body is given by the product of the moment of inertia about the z-axis (I₃) and the angular velocity component along the z-axis (w₃).

b) The z-component of torque (T₃) acting on the body is given by the difference between the moments of inertia about the z-axis (I₃₃) and the other two principal axes (I₂ and I₁), multiplied by the product of angular velocity components along the other two axes (w₁ and w₂).

c) For torque-free motion, there is no external torque acting on the body, so the product of the moment of inertia about the z-axis (I₃) and the angular velocity component along the z-axis (w₃) remains constant.

d) For torque-free motion in general, the z-component of the angular momentum (I₃w₃) remains constant. This equation relates the moment of inertia about the z-axis (I₃), the angular velocity component along the z-axis (w₃), and the product of the moments of inertia about the other two axes (I and I₁) multiplied by the product of angular velocity components along those axes (w₁ and w₂).

The given statements explain the relationships between the moments of inertia (I₃, I₂, I₁) and the angular velocity components (w₁, w₂, w₃) in terms of torque and torque-free motion of a rigid body.

To know more about angular velocity, visit:

https://brainly.com/question/29342095

#SPJ11

a. The horizontal position and vertical position at 2-second intervals for the first 10.0 seconds is: 0.0 m

b. The graph will show a straight line parallel to the x-axis representing the horizontal position of the stone, and another horizontal line at y = 0.0 m representing the stone's constant vertical position

(a) The stone's horizontal position at 2-second intervals for the first 10.0 seconds is constant and equal to the initial horizontal velocity multiplied by time: 60.0 m, 120.0 m, 180.0 m, 240.0 m, 300.0 m, 360.0 m, 420.0 m, 480.0 m, 540.0 m, 600.0 m.

The stone's vertical position at 2-second intervals for the first 10.0 seconds can be calculated using the formula: vertical position = (1/2) × acceleration × time².

Since the stone is thrown horizontally, its vertical position remains constant at 0.0 m throughout the motion.

(b) The graph of the stone's trajectory will have time on the x-axis and position on the y-axis. Since the stone is thrown horizontally, the horizontal position will increase linearly with time, resulting in a straight line parallel to the x-axis.

The vertical position remains constant at 0.0 m, so it will be a horizontal line at y = 0.0 m.

The graph will show a straight line parallel to the x-axis representing the horizontal position of the stone, and another horizontal line at y = 0.0 m representing the stone's constant vertical position.

To know more about "Velocity" refer here:

https://brainly.com/question/31479424#

#SPJ11

The given question is incomplete, so a complete question is written below,

A stone is thrown horizontally at 30.0 m/s from the top of a very tall cliff. (a) Calculate its horizontal position and vertical position at 2-second intervals for the first 10.0 seconds. (b) Plot your positions on a graph, with time on the x-axis and position on the y-axis, to visualize the stone's trajectory.

The estimated radius of curvature for the curve on the highway is approximately 68.8 meters.

To estimate the radius of curvature for a curve on a highway, we can use the equation that relates the radius of curvature (R) to the suggested speed (v) and the coefficient of friction (μ) between the tires and the road surface.

The equation is:

R = (v²) / (g * μ)

Where:

R is the radius of curvature,

v is the suggested speed,

g is the acceleration due to gravity (approximately 9.8 m/s²), and

μ is the coefficient of friction.

Since the problem states that the suggested speed is based on what would be safe in wet weather, we can assume a lower coefficient of friction compared to dry conditions. For wet weather, a typical value for the coefficient of friction on a paved road is around 0.4.

Let's assume a suggested speed of 60 km/h (16.7 m/s) for this curve. Plugging the values into the equation, we can calculate the estimated radius of curvature:

R = (16.7 m/s)² / (9.8 m/s² * 0.4)

R ≈ 68.8 meters

Therefore, the estimated radius of curvature for the curve on the highway is approximately 68.8 meters.

To know more about radius, visit

https://brainly.in/question/33888273

#SPJ11

The magnitude of the magnetic field is approximately 3.983 T for an alpha particle (q = 3.2×10-19 C)  which is launched with a velocity of 5.2×104 m/s at an angle of 35°  with respect to a uniform magnetic field where the magnetic field exerts a force of 1.9×10-14 N.

The magnitude of the magnetic field (B) can be determined using the formula for the magnetic force on a charged particle moving through a magnetic field:

F = q * v * B * sin(theta),

where:

F is the force on the particle (given as 1.9×10^(-14) N),

q is the charge of the particle (given as 3.2×10^(-19) C),

v is the velocity of the particle (given as 5.2×10^4 m/s),

B is the magnitude of the magnetic field (to be determined),

theta is the angle between the velocity vector and the magnetic field direction (given as 35°).

To solve for B, we rearrange the formula as follows:

B = F / (q * v * sin(theta)).

Now, let's substitute the given values into the formula and calculate the magnitude of the magnetic field:

B = (1.9×10^(-14) N) / ((3.2×10^(-19) C) * (5.2×10^4 m/s) * sin(35°)).

Using a calculator, we can evaluate the right side of the equation:

B = (1.9×10^(-14)) / ((3.2×10^(-19)) * (5.2×10^4) * sin(35°)).

B ≈ 3.983 T.

Therefore, the magnitude of the magnetic field is approximately 3.983 Tesla (T).

In conclusion, the magnitude of the magnetic field is approximately 3.983 T.

To know more about field visit:

https://brainly.com/question/26730557

#SPJ11