write a statement that throws a newly created exception object whose message is "does not compute".

The power plan on a portable Windows 10 system that puts the computer to sleep after 15 minutes is the a. Power Saver (AC) plan. This plan is specifically designed to conserve energy and extend battery life when the laptop is plugged into an electrical outlet.

It reduces the performance of the system to save energy and dims the screen brightness to save power. The Power Saver (AC) plan also puts the computer to sleep after a short period of inactivity to conserve energy. On the other hand, the Balanced (AC) and Balanced (Battery) plans are designed for normal day-to-day usage. The Balanced (AC) plan is used when the laptop is connected to a power source, and it balances the performance of the system with energy consumption. It does not put the computer to sleep after 15 minutes of inactivity.

The Balanced (Battery) plan, on the other hand, is designed to conserve battery life and extend the time the laptop can run on a single charge. It also does not put the computer to sleep after 15 minutes of inactivity. In summary, if you want your portable Windows 10 system to automatically go to sleep after 15 minutes of inactivity, you should select the Power Saver (AC) plan. However, if you want to balance performance and energy consumption or extend battery life, you should select the Balanced (AC) or Balanced (Battery) plan, respectively.

Learn more about Windows 10 system here-

https://brainly.com/question/31563198

#SPJ11

TRUE. By default, BitLocker Drive Encryption is turned on for the drive on which Windows is installed. This means that the operating system drive (usually the C drive) is encrypted with BitLocker when you install Windows.

This helps protect your data from unauthorized access, even if your device is lost or stolen. BitLocker works by encrypting the entire drive, including all of the files and system files stored on it. This encryption is transparent to the user, so you can continue to use your device as normal, without noticing any difference in performance. To access the drive and its contents, you need to enter the correct BitLocker password or provide the recovery key. If you don't have this information, you won't be able to access the drive, even if you have physical access to the device. BitLocker Drive Encryption is a powerful security feature that helps keep your data safe from prying eyes. However, it's important to remember to keep your password or recovery key in a safe place, as losing it could result in permanent data loss.

Learn more about operating system here-

https://brainly.com/question/31551584

#SPJ11

The bandwidth of a good crystal lattice filter for single-sideband phone emissions would typically be around 2.1 kHz.


The bandwidth of the filter is determined by the number of poles (or stages) in the filter and the cutoff frequency of each stage. A good crystal lattice filter for single-sideband phone emissions would typically have a cutoff frequency of around 2.7 kHz and 8-10 poles, resulting in a bandwidth of around 2.1 kHz.

Crystal lattice filters are used in SSB communication systems to narrow down the bandwidth and provide a better signal-to-noise ratio. The ideal bandwidth for SSB phone emissions varies depending on the specific application and desired audio quality. A range of 2.1 kHz to 2.9 kHz is commonly used, with 2.4 kHz being a typical value for many systems.

To know more about Single-sideband visit:-

https://brainly.com/question/31929777

#SPJ11

A font refers to a collection of characters with a similar, specific design.  for this is that a font includes various styles and sizes of a particular typeface, such as Arial or Times New Roman.

This allows for consistent and recognizable text across various mediums, such as in print or on a website. The other options, symbol, point, and keyword, do not accurately describe a collection of characters with a specific design. A font refers to a collection of characters with a similar, specific design.

A font is a set of characters (letters, numbers, punctuation, and symbols that share a consistent design, style, and size. Fonts allow for a wide range of text styles to be used in documents and designs, helping to convey different messages and aesthetics.

To know more about  specific design visit :

https://brainly.com/question/30700445

#SPJ11

A "font" (option B) refers to a collection of characters with a similar, specific design. Fonts determine the style and appearance of text in various forms of communication, such as on websites or in printed materials.

The term that refers to a collection of characters with a similar, specific design is a font. Fonts are used in various applications to style text and create a unique visual identity for a document or design project. A font is different from a symbol, which is a single character or image used to represent an idea or concept. It is also different from a point, which is a unit of measurement for font size.

A keyword, on the other hand, is a term used to describe the main topic or theme of a document or webpage. Therefore, the correct answer to your question is B) font.

To know more about Fonts visit:-

https://brainly.com/question/14934409

#SPJ11

A NIC (Network Interface Card) contains a data transceiver, which is responsible for transmitting and receiving data signals. The data transceiver is a device that both transmits and receives data across a network, allowing the computer to communicate with other devices on the network.

It is also responsible for encoding and decoding the signals sent across the network.

A NIC is a hardware component that is inserted into a computer's expansion slot, providing a physical connection to the network. Once installed, the NIC can connect to the network using a variety of different technologies, such as Ethernet, Wi-Fi, or Bluetooth.

NICs come in a variety of different types and configurations, depending on the specific needs of the user. Some NICs are designed for use in servers, while others are intended for desktops or laptops. NICs may also include additional features such as support for advanced networking protocols, multiple ports for connecting to multiple networks, and advanced security features to protect the network from unauthorized access.

Learn more about data here:

https://brainly.com/question/10980404

#SPJ11

The utilitarian approach is a moral philosophy that emphasizes the greatest overall good for the greatest number of people, weighing the costs and benefits of actions and decisions to maximize overall utility or happiness.

True. The utilitarian approach to normative ethics focuses on the greatest good for the greatest number of people. This means that any ethical decision should be made based on the outcome that would result in the greatest benefit for the most people. The approach looks at the consequences of actions rather than the motives behind them. In other words, if an action will bring about more happiness than any alternative, then it is the right thing to do. This approach has been critiqued for neglecting individual rights, but it remains a popular framework for ethical decision-making. In conclusion, the utilitarian approach prioritizes the welfare and benefit of all people, and this is what makes it a consequentialist approach to normative ethics.

In this ethical framework, actions are considered morally right if they result in the greatest overall happiness or pleasure for the greatest number of people. An action's morality is judged based on its consequences, rather than on any inherent characteristics of the action itself. In conclusion, utilitarianism evaluates ethical decisions by weighing the potential benefits and harms for all involved parties, aiming to maximize overall welfare and minimize suffering.
To know more about utilitarian approach visit:

https://brainly.com/question/30294966

#SPJ11

To design a 32KW, fully associative cache that has 4 32-bit words per block, we can start by calculating the total number of blocks in the cache.

32KW = 32,768 words = 8,192 blocks (since each block has 4 words)

(a) To calculate the number of bits used for the byte offset, we need to determine the number of bytes per word. Since each word is 32 bits or 4 bytes, we need 2 bits for the byte offset (as 2 bits can represent 4 possible byte addresses).

(b) To calculate the number of bits used for the block offset, we need to determine the number of bytes per block. Since each block has 4 words or 16 bytes, we need 4 bits for the block offset (as 4 bits can represent 16 possible block addresses).

(c) To calculate the number of bits used for the index field, we need to determine the number of blocks in each set. Since this is a fully associative cache, there is only one set with all the blocks. Therefore, there are no bits used for the index field.

(d) To calculate the number of bits used for the tag, we can use the remaining bits from the 32-bit address after accounting for the byte offset and block offset.

Tag bits = 32 - byte offset - block offset = 32 - 2 - 4 = 26 bits

(e) The physical size of each set can be calculated as follows:

Size of each block = tag bits + data bits = 26 bits + (4 x 32 bits) = 154 bits

Size of each set = number of blocks in each set x size of each block = 1 x 154 bits = 154 bits

Therefore, the physical size of each set is 154 bits.

For more information on byte offset visit:

brainly.com/question/30737846

#SPJ11

Slave devices that are connected to a piconet and are sending transmissions are known as what? The correct answer is: c. Active slaves Active slaves are the devices within a piconet that actively participate in transmissions, while passive slaves remain connected but do not currently send or receive data.

learn more about piconet here:

https://brainly.com/question/31934144

#SPJ11

The maximum number of NICs used in NIC teaming for Hyper-V virtual machines is

Hyper-V is a virtualization technology that permits multiple virtual computer systems (VMs) to be hosted on one single physical server. Consequently, hypervisor software is tasked with laying between the physical equipment and the VMs, performing efficient resource management as well operating in a more accommodating fashion, meaning increased flexibility and scalability for administrators managing IT infrastructure.

Furthermore, these virtual machines in this context are artificially manufactured computers existing only in the form of software packages, found running on the Hyper-V hypervisor.

Learn more about Hyper-V virtual machines at

https://brainly.com/question/28322407

#SPJ1

False The length of cable between the wall jack and a patch panel is called horizontal cabling, not vertical cabling.

Horizontal cabling refers to the cabling that runs from a patch panel to a wall jack or other network connection point. This cabling is typically located within the same building or floor, and it connects end-user devices to the local area network (LAN). In contrast, vertical cabling refers to the cabling that runs between different floors or levels in a building. This cabling connects different network equipment or distribution points, such as a telecommunications room on one floor to another on a different floor.

To learn more about horizontal click on the link below:

brainly.com/question/29562236

#SPJ11

False.   A Request for Quotation (RFQ) is more specific than a Request for Proposal (RFP).

An RFQ is a document that a company sends to one or more vendors, requesting a quote for the price of a specific product or service. The RFQ usually includes specific details about the product or service that the company is looking for, such as quantity, quality, delivery time, and other technical specifications.

On the other hand, a Request for Proposal (RFP) is a document that a company sends to potential vendors or contractors, asking for a proposal that outlines how they will meet the company's needs. An RFP is more general than an RFQ, as it allows vendors to propose their own solutions to the company's problem, rather than simply quoting a price for a specific product or service.

Learn more about RFP here:

https://brainly.com/question/28836085

#SPJ11

The two types of devices that can provide power to a PD (Power Device) within a WLAN (Wireless Local Area Network) are Midspan and Endpoint

Midspan devices, also known as PoE injectors, supply power to the network devices through the Ethernet cable. Endpoint devices, also known as PoE switches or PoE-enabled network devices, provide both power and data connectivity to PDs directly from the network switch.

Power Sourcing Equipment (PSE) devices can provide power to a Powered Device (PD) within a WLAN. The PSE devices can be switches, routers, or other networking equipment that are designed to supply power to a PD over Ethernet cabling, which is known as Power over Ethernet (PoE) technology. This eliminates the need for a separate power source for the PD, making installation and maintenance easier and more cost-effective.

To learn more about Power Here:

https://brainly.com/question/30114513

#SPJ11

From a database user perspective, the data type determines the way data can be manipulated - True.

From a database user perspective, the data type does determine the way data can be manipulated. Different data types have different properties and restrictions, which affect how data can be stored, retrieved, and manipulated. For example, a numeric data type can be used for mathematical operations, while a text data type is used for storing textual information. Similarly, a date/time data type can be used for sorting and filtering data by date or time. Therefore, it is important for database users to be aware of the data type of their data and how it can be manipulated. This knowledge can help users optimize their queries and improve the performance of their applications. In summary, the statement "From a database user perspective, the data type determines the way data can be manipulated" is true.

Learn more on databases here:

https://brainly.com/question/31262690

#SPJ11

With VTP (VLAN Trunking Protocol), the VLAN database is stored on a switch known as the VLAN server.

The VLAN database is a configuration file that contains information about the VLANs (Virtual Local Area Networks) that are configured on the network. This includes information such as VLAN IDs, names, and associated port information.In a VTP-enabled network, switches can exchange VLAN information with each other using VTP messages. When a switch receives a VTP Trunking from another switch, it updates its VLAN database with the new information. This allows VLAN configurations to be easily propagated across the network.The VLAN server is the switch that is responsible for maintaining and distributing the VLAN database to other switches in the network. It is typically designated as the switch with the highest configuration revision number, which is used to determine which switch's VLAN database is the most up-to-date.

To learn more about Trunking click on the link below:

brainly.com/question/30712139

#SPJ11

The solid circular steel rod must have a smallest diameter of 2.15 inches in order to be used as a column with an effective length of 18 feet and an axial load of 40 kip.

To determine the smallest diameter of the steel rod required, use Euler's formula:

P_critical = (π² × E × I) / L²

where P_critical = critical buckling load, E = modulus of elasticity, I = area moment of inertia, and L = effective length of the column.

Rearrange this equation to solve for the area moment of inertia:

I = (P_critical × L²) / (π² × E)

For a solid circular rod, the area moment of inertia is given by:

I = (π × d⁴) / 64

where d = diameter of the rod.

Substituting the expression for I into the equation for P_critical:

P_critical = (π² × E × (π × d⁴ / 64)) / L²

Simplifying this expression:

P_critical = (π³ × E × d⁴) / (64 × L²)

Now solve for the diameter d:

d⁴ = (64 × P_critical × L²) / (π³ × E)

d = (64 × P_critical × L² / π³ × E)^(1/4)

Given an effective length of 18 ft and an axial load of 40 kip, know the modulus of elasticity of the steel being used. Assuming a value of E = 29,000 ksi (kilopounds per square inch), calculate the minimum diameter required as:

d = (64 × 40 kip × (18 ft × 12 in/ft)² / (π³ × 29,000 ksi))^(1/4)

d ≈ 2.15 inches

Therefore, the smallest diameter of the solid circular steel rod required for use as a column with an effective length of 18 ft and an axial load of 40 kip is approximately 2.15 inches.

Find out more on diameter here: https://brainly.com/question/390660

#SPJ4

True. The Customs-Trade Partnership Against Terrorism (C-TPAT) program was established by the U.S. Customs and Border Protection (CBP) in response to the September 11 terrorist attacks. Its main goal is to ensure that all participants involved in the supply chain adhere to strict security guidelines to prevent the introduction of terrorist weapons into the United States.

On the other hand, the Safe Ports Act (Security and Accountability for Every Port Act), also known as SAFE, was signed into law in 2006 by President George W. Bush. It aims to improve the security of U.S. ports by requiring a range of measures to be implemented, including the screening of all cargo containers entering the country. The C-TPAT program and the SAFE Act have many similarities in terms of their objectives, as they both aim to enhance the security of U.S. ports and supply chains. The C-TPAT program operates within the guidelines established by the SAFE initiative, as it requires participants to implement security measures in line with those required by the Act. Both programs also rely on collaboration between government agencies, private companies, and other stakeholders to achieve their objectives. However, it is important to note that the C-TPAT program is voluntary, while the SAFE Act is mandatory for all ports and companies involved in international trade.

Learn more about C-TPAT program  here-

https://brainly.com/question/31731658

#SPJ11

The easiest way to check the type of refrigerant used in a 60 ton packaged rooftop unit is to look for the unit's nameplate or identification tag. The nameplate usually indicates the type of refrigerant used by providing information such as the model and serial number, as well as the refrigerant type and quantity.

The nameplate is a metal or plastic label that is usually located on the exterior of the rooftop unit. It contains important information about the unit, including the manufacturer, model, serial number, electrical requirements, and refrigerant type. By locating the nameplate, you can quickly determine the type of refrigerant used in the unit and ensure that you are using the correct refrigerant when servicing or repairing the unit. It is important to note that different refrigerants have different operating pressures and properties, and using the wrong refrigerant can cause damage to the unit and potentially harm people or the environment. The easiest way to check the type of refrigerant used in a 60-ton packaged rooftop unit is to locate the unit's data plate or label.
To Know more about refrigeran visit;

https://brainly.com/question/13002119

#SPJ11

If a nonessential service is slowing down the startup on your computer, there are a few ways to disable it permanently. One option is to use the System Configuration tool, also known as "msconfig," which allows you to manage startup programs and services.

To access the System Configuration tool, press the Windows key + R to open the Run dialog box, then type "msconfig" and press Enter. Once you're in the tool, go to the Services tab and uncheck the box next to the nonessential service that is causing the slowdown. You can also disable other startup programs that you don't need by going to the Startup tab and unchecking their boxes.

Another way to permanently disable a nonessential service is to use the Services app in Windows. To access this, press the Windows key + R to open the Run dialog box, then type "services.msc" and press Enter. Once you're in the app, locate the nonessential service that is causing the slowdown, right-click it, and select Properties. Under the General tab, change the Startup type to "Disabled" and click Apply.

It's important to note that disabling nonessential services can have unintended consequences, so make sure you know what you're doing before making any changes. If you're unsure about a service, it's best to leave it enabled or seek advice from a professional.

To know more about System Configuration visit:

https://brainly.com/question/28199118

#SPJ11

The simplest way to deploy a security template on several computers simultaneously is by "importing the security template into a GPO".

Group Policy Objects (GPOs) are used to manage multiple computers in an Active Directory (AD) environment. Importing a security template into a GPO is a straightforward process that allows for the creation of a centralized security configuration that can be applied to multiple computers at once. Once the security template is imported into a GPO, it can be linked to the appropriate organizational unit (OU) or domain, and the security settings will be applied to all computers within that OU or domain. This method is much more efficient than saving a copy of the template to each computer, which would require manual updates and management of each copy.

Learn more about Group Policy Objects (GPOs) here:

https://brainly.com/question/31066652

#SPJ11

When coming to a stop behind a large truck, a driver should leave a following distance of at least one full car length for every 10 mph of speeding .

This following distance guideline is known as the "three-second rule" and can be applied to any driving situation where a vehicle is following another vehicle, including driving behind a large truck. To use the three-second rule, a driver should select a fixed point on the road (such as a sign or a tree) and count the number of seconds it takes for their vehicle to reach that point after the vehicle in front of them passes it. If the driver reaches the fixed point in less than three seconds, they should increase their following distance.

To learn more about speeding click the link below:

brainly.com/question/4199690

#SPJ11

GCSS-Army Bill of Materials (BOMs) are typically built from Authoritative Source Documents.

BOMs, or Bill of Materials, are a comprehensive list of all the components and parts that are required to build or assemble a particular product or item. BOMs typically include the quantity and description of each part or component, as well as other important information such as part numbers, supplier information, and cost. BOMs are commonly used in manufacturing, engineering, and other industries to ensure that all the necessary parts and components are available when needed. BOMs can also help to streamline the manufacturing or assembly process by providing a clear and organized list of required materials. BOMs can be created and managed using various software tools, including enterprise resource planning (ERP) systems and product lifecycle management (PLM) software. In addition to creating BOMs, these tools may also provide functionality for managing inventory, tracking costs, and collaborating with suppliers and other stakeholders. Overall, BOMs are an essential tool for ensuring that products are built or assembled correctly and efficiently, while also providing important information for managing the supply chain and controlling costs.

Learn more about (BOMs)  here:

https://brainly.com/question/15469807?

#SPJ11

Yes, the gradual piecemeal degradation of an area by such activities as logging and road building is a well-documented phenomenon.

Over time, the repeated use of heavy machinery, the removal of trees and other vegetation, and the disturbance of soil and water systems can have significant negative impacts on the local environment. These impacts can include erosion, soil compaction, decreased water quality, and habitat destruction for local wildlife. Additionally, the increased accessibility created by roads can lead to increased human activity in previously remote areas, further exacerbating the negative impacts of logging and road building. It is important for those engaged in these activities to carefully consider their environmental impact and take steps to minimize or mitigate any damage that may be caused.

learn more about piecemeal here:

https://brainly.com/question/28548962

#SPJ11

The two pieces of information needed before selecting a power supply are:

The form factor of the case, The total wattage of all components.

1 The form factor of the case: This is important because different cases have different sizes and shapes that can accommodate different sizes of power supplies.

2 The total wattage of all components: This is important because the power supply needs to provide enough power to all components in the system, including the CPU, graphics card, and other peripherals.

The other options listed are not relevant in determining the appropriate power supply for a system. The installed operating system and the voltage requirements of peripheral devices do not affect the power supply selection process, while the type of CPU alone is not sufficient to determine the appropriate power supply as other components in the system also need to be considered.

Learn more about power supply  here:

https://brainly.com/question/29066483

#SPJ11

The channel section's center of gravity, measured from the rear of the web, is 80 mm.

To find the center of gravity of the channel section, break it down into simpler shapes and use the principle of moments.

First, consider the rectangle formed by the back of the web and the thickness of the flanges (300 mm x 20 mm x 10 mm).

Next, consider the two rectangles formed by the flanges (300 mm x 10 mm x 10 mm).

Finally, take into account the position of the web itself.

The web is centered within the thickness of the flanges, so its center of gravity is at a distance of 10 mm / 2 = 5 mm from the back of the web.

The area of the large rectangle is 300 mm x 20 mm = 6000 mm², and the areas of the two smaller rectangles are each 300 mm x 10 mm = 3000 mm².

So the overall area of the channel section is 6000 mm² + 2 x 3000 mm² = 12000 mm².

The weighted average distance from the back of the web is then:

(6000 mm² x 5 mm) + (3000 mm² x 5 mm) + (3000 mm² x 155 mm) / 12000 mm² = 80 mm

Therefore, the center of gravity of the channel section from the back of the web is 80 mm.

Find out more on centre of gravity here: https://brainly.com/question/874205

#SPJ1

A privilege escalation attack is an unauthorized attempt to increase permission levels. This type of attack occurs when an attacker gains access to a system or application with a lower level of privilege, and then attempts to escalate their privileges to gain greater access and control over the system.

Privilege escalation attacks can be carried out through various methods, such as exploiting vulnerabilities in the system, stealing credentials, or manipulating user permissions. The goal of a privilege escalation attack is to gain unauthorized access to sensitive data or resources, which can then be used for malicious purposes, such as data theft, sabotage, or espionage. To prevent privilege escalation attacks, it is important to implement strong security measures, such as multi-factor authentication, access control policies, and regular security audits. It is also important to keep systems and applications up-to-date with the latest security patches and updates, as many privilege escalation attacks exploit known vulnerabilities. Overall, privilege escalation attacks pose a significant threat to the security and integrity of computer systems and networks. By taking proactive measures to prevent these types of attacks, organizations can reduce their risk of data breaches and other security incidents.

Learn more about Privilege escalation attacks here-

https://brainly.com/question/30437572

#SPJ11

To make a specific database active, you must execute the USE database statement. This statement tells the MySQL server to use the specified database for any subsequent queries.

Once a database is activated, all subsequent queries will be executed in the context of that database until another database is specified or the connection is closed. The other options, CHANGE, SWITCH, and SELECT, do not have the same functionality as the USE statement. CHANGE is not a valid database statement, SWITCH is not recognized by MySQL, and SELECT is used to retrieve data from tables, not to switch between databases. Therefore, USE is the correct statement to use when you want to make a specific database active in MySQL.

learn more about database statement here:

https://brainly.com/question/31039727

#SPJ11

True. The internal state of an immutable class cannot be changed once it has been created.

This means that any operations on an immutable object will result in a new object being created, rather than modifying the original object. String is an example of an immutable class in many programming languages, including Java and Python. This means that any operations on a String object, such as concatenation or substring extraction, will result in a new String object being created rather than modifying the original String. The immutability of String objects makes them more efficient to work with in certain situations, as they can be safely shared across threads without fear of data corruption or race conditions. However, it is worth noting that not all classes are immutable, and it is important to be aware of the mutability of objects when working with them in your code.

Learn more on immutable classes here:

https://brainly.com/question/31542725

#SPJ11

In most common implementation models, the content filter has two components: 4. rating and filtering. Content filtering is a technique that restricts access to certain types of online content that are considered inappropriate or harmful.

The rating component of a content filter is responsible for assigning a rating to each piece of content that is being filtered. The rating typically indicates the level of maturity or appropriateness of the content. This rating is then used by the filtering component of the content filter to decide whether or not to allow access to the content. The filtering component of the content filter is responsible for examining each piece of content and determining whether or not it meets certain criteria.

This criteria may include the rating assigned to the content, the type of content, and other factors. If the content meets the criteria, it is allowed through the content filter. If it does not meet the criteria, it is blocked. It is important to note that the two components of the content filter, rating and filtering, work together to ensure that only appropriate content is allowed through the filter. Without the rating component, it would be difficult for the filtering component to accurately determine whether or not a piece of content is appropriate. Without the filtering component, the rating component would be useless, as inappropriate content could still be accessed.

Learn more about content filter here-

https://brainly.com/question/13129235

#SPJ11

The correct answer is b. Disaster recovery solutions. Virtual machines can be protected in the event of a data center interruption by utilizing disaster recovery solutions, which involve replicating data and applications to a secondary site or cloud-based infrastructure.

This enables rapid recovery in the event of a disaster or outage, ensuring business continuity.High availability (a) refers to the ability of a system to remain operational and accessible even in the event of component failures. NIC teaming (c) involves combining multiple network interface cards to increase network bandwidth and provide redundancy. Fault tolerance (d) involves designing a system with redundant components to minimize downtime and ensure continued operation in the event of a hardware failure. While these measures can improve system reliability, they do not provide the same level of protection as a disaster recovery solution in the event of a major outage or disaster.

Learn more about machines here:

https://brainly.com/question/2555822

#SPJ11

To use a virtual terminal (VTY) connection to a Cisco device, the following requirements must be met:The Cisco device must have a valid IP address and must be reachable from the network.

The device must have the appropriate configurations set up to allow remote access via Telnet or SSH.The device must have a configured VTY line that allows Telnet or SSH connections.The VTY lines must be configured with login authentication to ensure secure access.The administrator must have valid credentials to log in to the device.The administrator must use a Telnet or SSH client to establish a connection to the device.The administrator must be aware of the number of available VTY lines on the device and should not exceed the maximum number of concurrent connections allowed.

To learn more about network click the link below:

brainly.com/question/14083709

#SPJ11