The balanced molecular equation and net ionic equation for the neutralization are as:
2HCl (aq) + Sr(OH)₂ (aq) → SrCl2 (aq) + 2H₂O (l)
H⁺ (aq) + OH⁻ (aq) → H₂O (l)
In neutralization and acid-base reactions, an acid and a base react to produce salt and water. Salt and water are neutral in nature so it is called a neutralization reaction. In the above-mentioned reaction hydrochloric acid and strontium hydroxide react to produce strontium chlorite and water.
The chemical equation for the reaction is as follows:
HCl (aq) + Sr(OH)₂ (aq) → SrCl₂ (aq) + H₂O (l)
As the number of moles of elements is not equal on the reactant and product side so add 2 with HCl and 2 with H₂0 to balance the equation.
2 HCl (aq) + Sr(OH)₂ (aq) → SrCl₂ (aq) + 2 H₂O (l)
After removing the spectator ion the net ionic equation will be as:
H⁺ (aq) + OH⁻ (aq) → H2O (l)
You can also learn about net ionic equation from the following question:
https://brainly.com/question/15466794
#SPJ4
Identify each category of substance as soluble or insoluble in water.
Most carbonate and phosphate salts blank
Most halide (Br-, Cl-, and I-) salts blank
Most silver salts blank
salts of group 1 elements blank
Most nitrate salts blank
Except for salts of Metallic elements , ammonium, NH, most phosphates (PO43) and carbonates (CO32) are insoluble. Unless they are those from Group IA metals, all oxides are insoluble. Sulfides S2- are often insoluble.
What is the purpose of ammonium?Ammonium produced by industrial is used as fertilizers to the rate of 80%. In contrast to all of these uses, nitrogen is turned into chemicals, explosives, textiles, insecticides, dyes, and many other chemicals. It is also used to disinfect water sources.
Is ammonium unhealthy for you?High rates of ammonia in the air can result in rapid ocular, nose, throat, and respiratory tract burning as well as blindness, lung damage, or perhaps even death. Lower quantities of the substance can irritate the nose, throat, and induce coughing.
To know more about ammonium visit :
https://brainly.com/question/10834028
#SPJ4
you have determined that a and b react to form products. which of the following experimental designs would produce data that would allow you to determine the order of the reaction with respect to reactant a? question 5 options: vary the concentrations of reactants a and b. vary the concentration of reactant a while keeping the concentration of reactant b constant. vary the concentration of reactant b while keeping the concentration of reactant a constant. vary the temperature while keeping the concentrations of both reactants constant.
Even if the reactant concentrations alter, the rate constant remains the same. The rate constant rises as the reactant concentrations decline.
What does the word "reaction" signify in chemistry?One or even more chemicals, also referred to as reaction mixture, are transformed within one or more other substances, often referred to as products, in a nuclear reaction. Subatomic particles or combinations make up materials.
Using an illustration, define respond.A chemical reaction occurs once one or more atoms change into one or more other molecules. An illustration of this is that when iron + oxygen combine to make rust. When acidic and caustic granules are mixed, salt, CO2, plus moisture are indeed the results. burning or exploding objects
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ4
the solution to be analyzed has an absorbance of 0.86 . calculate the molar concentration of cu2 ions in this solution.
The molar concentration of the cu2 ions is 0.23M.
What is molar concentration?
The best way to describe the concentration of a solute in a solution is in terms of its molar concentration. The term "molarity" (M = mol/L) refers to the total number of moles of solute dissolved in one litre of solution.
What is absorbance?
The amount of light absorbed by a solution is known as its absorbance (A), or optical density (OD). Quantity of light passing through a solution is known as transmittance.
Therefore, the molar concentration of the cu2 ions is 0.23M.
Learn more about molar concentration from the given link.
https://brainly.com/question/14923826
#SPJ4
How do you do 2s facts?.
2s complement means the negative of a binary number which is represented by switching all ones to zeros and all zeros to ones and then adding one to the result.
Some steps to be followed-
Step 1: Write the absolute value of the given number in binary form. Prefix this number with 0, indicate that it is positive.
Step 2: Take the complement of each bit. This can be done by changing zeroes to ones and ones to zero.
Step 3: To your result one is added.
For example- We have to find 2's complement of binary number 10101110. Then simply we have to invert each bit of given binary number, which comes out to be 01010001. Then we have to add 1 to the LSB of this result, that is 01010001+1=01010010.
01010010 will be the answer.
To learn more about 2s complement visit the link- https://brainly.com/question/16155142
#SPJ4
If 11.0 g of water are produced when the expected yield is 11.6 g, what is the percent yield?
The percent yield will be equal to 94.8 % when the expected yield is 11.6 g.
What is the percent yield?The percentage yield can be defined as the ratio of actual yield to theoretical yield. Yield can be described as a measure of the number of moles of a product produced in a chemical reaction in proportion to the amount of reactant consumed.
The percentage yield can determine the difference between the actual product produced and the maximum calculated yield.
Percent yield = Actual yield/ expected yield × 100 %
Given, the amount of produce in the reaction = 11 g
The actual yield of the water = 11.0 g
The expected or theoretical yield = 11.6 g
Percent yield = (11/11.6) × 100 = 94.8 %
Learn more about percent yield, here:
https://brainly.com/question/12704041
#SPJ1
the radioisotope 40k decays to 40ar by positron emission with a half-life of 1.27 x 109 years. a sample of lunar meteorite was found to contain 78 40ar atoms for every 22 40k atoms. the age of the meteorite is ------------- years.
The age of the meteorite is 2.77 × 10⁹ years. The result is obtained by using the exponential decay equation.
What is the exponential decay equation?The exponential decay equation can be used to calculate radioactive decay for the activity, the nuclei, and also the mass. The exponential decay equation for the mass is
[tex]m = m_{o} e^{- \lambda t}[/tex]
Where
m = remaining massm₀ = initial massλ = decay constant (0.693/T½)T½ = half-lifet = decay timeWe had a sample of lunar meteorite contained 100% K-40 at start. Now, the sample contains 78% Ar-40 and 22% K-40. The half life is 1.27 × 10⁹ years.
To find the age of the meteorite, we can use the exponential decay equation.
First, let's calculate the decay constant.
λ = 0.693 / T½
λ = 0.693 / 1.27 × 10⁹
λ = 0.54567 × 10⁻⁹
If the remaining K-40 is 22%, the decay time is
[tex]m = m_{o} e^{- \lambda t}[/tex]
[tex]\frac{m}{m_{o}} = e^{- \lambda t}[/tex]
[tex]\frac{22}{100} = e^{-0.54567 \times 10^{-9} t}[/tex]
[tex]ln \: 0.22 = ln \: (e^{0.54567 \times 10^{-9} t})[/tex]
- 1.514 = - 0.54567 × 10⁻⁹ t
t = 2.77 × 10⁹ years
Hence, the age of the lunar meteorite containing Ar-40 and K-40 is 2.77 × 10⁹ years.
Learn more about radioactive decay here:
brainly.com/question/29490866
#SPJ4
A container has a mass of 125 g. When a liquid is added, the
mass becomes 163 g. What is the mass of the liquid?
Answer:
38 g
Explanation:
to find the mass of the liquid we just subtract the mass of the container by the mass of the container after they added the liquid
163-125
38
The liquid is 38 g
Hopes this helps please mark brainliest
The freezing point of a 1 m solution of FeCl is expected to be lower than that of a 1 m solution of glucose This is because Fels is more soluble and Choose compared with glucose CHECK e: 1.00 Choose... equal to FeCl3 is expected to be v lower than that of a 1 m soluti higher than compared with glucose. CHECK Status: Tries remaining: 2 Points possible: 1.00 Choose... is an electrolyte has a larger mass v is more soluble m solution of FeCl3 is expected to be lower than and Choose... compared CHEC ints possible: 1.00 solution of FeCl3 is expected to be lower than that compared with glucose dv Choose... has a larger van't Hoff factor has fewer moles of solute will not precipitate as much CHECK
The freezing point of a 1 m solution of FeCl is expected to be lower than that of a 1 m solution of glucose and this is because FeCL contains mole particles which means more solute particles than glucose.
Why is 1M Fecl3 have lower freezing point than 1M glucose solution?Dissolving something in water lowers its freezing point. This freezing point depression depends on the number of solute particles or solute ions or solute molecules present in the solution.This is because FeCL₃ can dissociate into cations and anions in aqueous solution. Therefore, aqueous solutions of 1 M FeCL₃ contain more dissolved particles compared to 1 M glucose solutions. Note that glucose cannot dissociate into ions in water. Therefore, their freezing points are higher.What is freezing point?Freezing is the phase change of a substance from liquid to solid.This is a phase change phenomenon, meaning that a substance changes from one cohesive state to another. The freezing point is the temperature at which a liquid changes physical state from liquid to solid at atmospheric pressure.These two phases are at the freezing point. Liquids and solids exist in equilibrium. That is, at this point both solid and liquid states exist at the same time. The freezing point of a substance depends on atmospheric pressure.Can learn more abut freezing point from https://brainly.in/question/53740725
#SPJ4
What is true about unstable isotopes?.
Unstable isotopes are defined as atoms which have unstable nuclei.These are also called as radioisotopes as they emit radiation.
What are isotopes?Isotopes are defined as substances having same number of protons but different number of neutrons.Number of protons is characteristic for determining position of elements in the periodic table.
Since,all isotopes have the same number of protons and hence have same position.They have similar chemical properties as they have same number of electrons.
They find applications in the field of nuclear medicine and oil and gas research . There are 2 types of isotopes : stable and unstable
Unstable isotopes are radioactive and are called as radioisotopes.
Learn more about isotopes,here:
https://brainly.com/question/27475737
#SPJ1
The equation for the reaction is:
2 Na + Br2 → 2 NaBr
1 g of bromine reacts with sodium.
Calculate the number of bromine molecules in 1 g of bromine.
1 mole of bromine contains 6.02 × 1023 bromine molecules.
Relative formula mass (Mr) of bromine = 160
One mole of bromine molecule weighs 160 g and the number molecules in one mole of any substance is 6.02 ×10²³. 1 g of Br₂ is 0.0062 moles thus number of molecules is 0.037 ×10²³.
What is Avogadro number?One mole of any substance contains 6.02 ×10²³ number of atoms. This number is called Avogadro number. Thus, one mole of every elements contains Avogadro number of atoms.
Similarly, one mole of every molecule or compound contains 6.02 × 10²³ molecules. Br₂ weighs 160 g for one mole. One mole of Br₂ contains 6.02 × 10²³ molecules.
Number of moles in 1 g of bromine gas is 1/160 =0.0062 moles. Thus number of molecules in 0.0062 moles of Br₂ is
= 0.0062 × 6.02 × 10²³
= 0.037 × 10²³
Therefore, the number of molecules in 1 g of Br₂ is 0.037 × 10²³
To find more on Avogadro number, refer here:
https://brainly.com/question/11907018
#SPJ1
3. why is the average atomic mass in amu(atomic mass unit) of a carbon-12 atom reported as 12.011 instead of 12 on the periodic table of the elements?
Part D Br Based on your answers to Parts A, B, and C select the best Lewis structure (electron-dot structure) for HCH View Available Hint(s) C:Br:H:
CH₃Br (Methyl bromide or bromoethane) is an alkyl halide. It only possesses one carbon atom. Three C-H bonds and one C-Br bond make up CH3Br's Lewis structure. The core atom is carbon, while the bromine atom possesses three lone pairs.
What is a Lewis structure?Lewis structures are diagrams that show the valence electrons of atoms within a molecule. They are often referred to as Lewis dot structures or electron dot structures.
What is the Lewis structure of CH₃Br?Since Hydrogen is always on the outside and Carbon is less electronegative than Bromine, it is always positioned in the middle with Bromine being placed on top. The CH3Br molecule contains the elements hydrogen, carbon, and bromine. There are a total of 14 valence electrons in CH3Br.
The valence electrons given by:
Hydrogen atoms = 1×3 = 3
Carbon atom = 4×1 = 4
Bromine atom = 7×1 = 7
Hence, the total valence electrons = 3 + 4 + 7 = 14
The electron-dot-structure is attached below.
To know more about alkyl halide please click here https://brainly.com/question/29507922
#SPJ4
when drawing the lewis structure of the h 2 c o molecule, the structure should represent a total of 12 valence electrons. based on the elements present, a total of electrons are needed for a stable structure. that, there should be bonds in the structure.
We have the total of 12 valence electrons for the H₂CO Lewis structure. starting by putting the Carbon in middle, and then the Hydrogens always go on outside, and then the Oxygen will go upwards. . We have 12 valence electrons.
We'll put 2 between atoms to form the chemical bonds and then on the outside to fill the octet of the Oxygen. So we just have the 2, 4, 6, 8, 10, and 12 electrons. At this point, everything has the full outer shell except the Carbon, which only has six valence electrons. We can take these 2 valence electrons to from Oxygen and then the share them to form the double bond. Now the Oxygen has 8 valence electrons, still has 8, but Carbon has 8. Thus ,the Hydrogens, it only need 2 for a full outer shell, so they're fine.
So in Lewis structure for H₂CO, it has completed the octets for each of the atoms, and where only 12 valence electrons are used.
To know more about lewis structure, please refer:
https://brainly.com/question/20300458
#SPJ4
Catalase is an enzyme found in yeast cells that facilitates the chemical breakdown of hydrogen peroxide to water and oxygen gas. An experiment was conducted to determine the effect of pH on catalase function. Five buffer solutions of varying pH (2, 4, 6, 8, and 10) were prepared and added to separate test tubes. Hydrogen peroxide (H2O2) was added to each test tube. Yeast was added, and the reactions were timed. After 1 minute the amount of oxygen gas released was determined by measuring the foam layer produced in each test tube. Figure 1 illustrates the experimental setup.
Figure 1. Illustration of experimental procedure
A set of five additional test tubes were prepared and used as controls. Which of the following best describes the contents expected to be contained in one of the five control test tubes?
Each of the five test tubes was supposed to have hydrogen peroxide and pH 4 solution was added as its only contents.
What is hydrogen and its uses?
Many other applications exist for hydrogen. It is used by the chemical industry to generate ch4 and methanol, that are intermediate as in synthesis of polymers and medications, in addition to ammonia for soil amendment (the Haber process). With in course of a petroleum process, it's also employed to remove sulfur in fuels.
Why is hydrogen not used as a fuel?
However, it is not utilized as a household fuel for a number of reasons: Because it is expensive to produce and is not readily available, hydrogen.
Hydrogen is less common in the environment than other gases.
To know more about hydrogen visit: brainly.com/question/28937951
#SPJ4
How does fiscal policy help economic growth?.
The government can influence the economy by changing its level of expenditure and tax revenue, which would either increase or decrease economic activity in the short term.
There are two basic tools available to policymakers when they want to affect the economy: monetary policy and fiscal policy. Through changes to interest rates, bank reserve requirements, purchases and sales of government securities, and foreign exchange, central banks can indirectly target activity by modifying the money supply. By altering tax revenue and types, spending amounts and types, and borrowing amounts and types, governments have an impact on the economy. Both directly and indirectly, governments have an impact on how economic resources are employed. In order to determine an economy's production, or gross domestic product (GDP), according to expenditures, national income accounting uses the following equation:
GDP is calculated as being equal to C plus I plus G plus N.
Learn more about revenue here:
https://brainly.com/question/28558536
#SPJ4
What are the 3 main features inside a prokaryotic cell?.
The cytoplasm of prokaryotes is made up of protein-producing structures called ribosomes and a hold ” of DNA that floats around freely. Prokaryotes lack a nucleus.
A prokaryotic cell is what?Prokaryotes are single-celled organisms that inhabit the Bacterio or Archaea domains. Eukaryotes lack proteins, really had no center, and are significantly smaller than eukaryotic cells. A cell wall protects every prokaryotic cell. Many additionally have included a polysaccharide-based capsule or slime layer.
What are prokaryotic cells used for?They are capable of breathing, digesting, and other bioactivities. Being single-celled creatures, prokaryotic cells carry out all of these tasks in a single cell.
To know more about Prokaryotic cells visit:
https://brainly.com/question/7153285
#SPJ4
when chlorine gas, cl2, is reduced to cl- ions, how many electrons does each chlorine molecule take on?
Chlorine atoms make up the chlorine gas. Each chlorine gains an electron during the reaction to create a chloride ion (Cl-), which is the process known as reduction.
What exactly is a chloride ion?The anion (negative charge ion) called Cl is the chloride ion. It is created when a molecule like hydrogen chloride dissolves in water or even other polar solvents, or when the halogen element chlorine obtains an electron. Sodium chloride and other chloride salts are frequently very miscible in aqueous.
Why are chloride ions charged positively?Again, the gain of one electron is more power for chlorine than the loss of seven. In order to produce an ions with 17 proton, 17 neutron, and 18 electron, it usually gains an electron.
To know more about chloride ions visit:
https://brainly.com/question/1307733
#SPJ4
What is the pattern of counting?.
In a series of integers, there might be patterns or sequences. Common relationships between all numbers are typically established by this pattern.
In chemistry, what exactly is a pattern?All throughout nature, there are patterns—regular, comprehensible forms or sequences. When researchers notice a pattern in the way things happen or when something deviates from the expected pattern, a scientific issue may be raised. To categorize phenomena or things into groupings, scientists can employ patterns.
What sort of behavior patterns exist?After learning the five fundamental types of chemical reactions—synthesis, breakdown, single replacement, double replacement, and combustion—students find it much simpler to accomplish this.
To know more about chemistry pattern visit:
https://brainly.com/question/15344589
#SPJ4
a. is not dangerous as it is relatively free from hazardous chemicals. b. contains approximately 70 carcinogens. c. is also known as mainstream smoke. d. none of these is correct.
The answer is b. contains approximately 70 carcinogens.
What is secondhand smoke?
Environmental tobacco smoke (ETS) is another name for secondhand smoke (SHS) (ETS). It combines two types of smoke produced when burning tobacco:
The smoke that a smoker exhales is known as mainstream smoke.
Sidestream smoke is the smoke that comes from a cigarette, pipe, cigar, or hookah's lit end. Compared to other types of smoke, this one has higher levels of nicotine and cancer-causing substances (carcinogens).
It is referred to as passive smoking or involuntary smoking when nonsmokers are exposed to SHS. Similar to smokers, those who breathe in SHS inhale harmful compounds including nicotine. The concentrations of these dangerous compounds in your body increase as you breathe in more SHS.
To learn more about secondhand smoke
https://brainly.com/question/1165015
#SPJ4
What are the items included in a citation?.
A citation typically contains the following information: the title of the book, article, or other sources; the name of the author; details, if any, about the journal from which it was derived; the date it was published; and, if it was read online, the date it was accessed.
A source is cited in a citation. A citation is, more precisely, a condensed alphanumeric phrase that appears in the text of an intellectual work and designates an entry in the bibliographic references section of the work in order to acknowledge the applicability of other people's works to the topic under discussion at the location where the citation appears.
The author, the title, the year of publication, and the name of the publisher are required in all book citations in APA, MLA, and Chicago formats. In-text citations also provide a page number to emphasize the particular passage mentioned.
Read more about citations at:
brainly.com/question/28365429
#SPJ4
indicate which molecule contains the largest number of one-pair electrons indicate which molecule contains the largest number of one-pair electrons no h2o o3 co2 n2o
According to the given statement O₃ molecule contains the largest number of one-pair electrons no.
What is a molecule and example?A molecule is an object comprised of a few atoms that are linked together chemically; the precise number of protons and neutrons that make up a protein is known. One hydrogen atom gets joined between one chlorine atom to form the molecule HCl(g), for instance. It is referred to as a diatomic molecule and has only two atoms.
Is water a molecule?Molecules are created when atoms come together. Two hydro (H) atoms but one ozone (O) atom make up the three atoms that make up a water molecule. Because of this, water is occasionally abbreviated as H2O. There are billions of molecules of water in a single liquid drop.
To know more about Molecule visit:
https://brainly.com/question/1446104
#SPJ4
the choice of solvent can also affect the products obtained in alkene reactions. indicate the preferred product obtained when 1-methylcyclohexene is reacted with bromine in diethyl ether or water solvents.
Elimination processes of compounds with excellent leaving groups connected to sp3 carbons are the main method used to create alkenes. Dehydrohalogenations with strong bases and the dehydration of alcohols with acids are two examples of these reactions. An addition reaction is the opposite of an elimination reaction.
What is Alkene reactions ?The addition reaction to a C=C double bond is the most frequent form of reaction for alkenes. In an addition reaction, a tiny molecule is added to several bonds, resulting in the conversion of one bond into two bonds (a decrease in the unsaturation degree).The bromines "anti-add" to the double bond's opposing faces. In this reaction, the solvent is occasionally stated; carbon tetrachloride is a typical solvent (CCl4). The addition of CCl4 has no effect on the reaction; it is merely used to distinguish it from reactions in which water serves as the solvent and a bromohydrin is produced.CCl4 is only the solvent and has no impact on the reaction (unlike when water or alcohols are the solvent – see bromohydrin formation page). To distinguish this reaction from situations where Br2 can promote bromination through a radical pathway, the word "dark" is occasionally used.
To know more about Alkene reactions please click here ; https://brainly.com/question/21027431
#SPJ4
Calculate the ph at 25°c of a 0.045 m solution of a weak acid that has ka = 1.2 × 10−5
The pH of the 0.045 M solution of a weak acid that has ka = 1.2 x10-⁵ is 3.97.
What is the pH of a weakly acidic solution?The pH of a solution is a measure of the acidity or alkalinity of that solution.
The pH of a solution is the negative logarithm of the hydrogen ion concentration in the solution.
Since weak acids are not completely ionized in solution, the Henderson-Hasselbalch equation is used to determine pH. The Henderson-Hasselbalch equation is expressed as
pH = pKa + log([A⁻] / [HA]
Where;
pKa = -log(Ka)
[A⁻] is the concentration of the conjugate base
[HA] is the concentration of the weak acid
Acid Ka = 1.2 * 10⁻⁵
[A⁻] = [H⁺] = x.
[HA] = 0.045 M - x.
Ka = [A⁻]·[H⁺] / [HA].
1.2·10⁻⁵ = x² / (0.045 M - x).
Solve quadratic equation: [H⁺] = 0.00001199M.
pH = -log[H⁺].
pH = -log(0.00001199 M).
pH = 4.92
For more information on the Henderson-Hasselbalch equation, see
Brainly.com/question/13423434
#SPJ4
An illustration of a hand holding a pot of boiling water over a fire. the first is labeled a, the circular arrows in the boiling water are labeled b and the warmed handle is labeled c. identify the method of thermal energy transfer. a: b: c:
The transport of thermal energy through waves that can pass through air or perhaps even void space is known as thermal radiation.
Is transfer of energy a trustworthy business?3.8 out of 5 stars have been given to Energy Transfer overall based on 493 anonymous employee reviews. Employee satisfaction at Energy Transfer is 69%, and 67% of workers would recommend the company to a friend.
Why is energy transfer important?Living things need energy to move, breathe, expand, and generate offspring. Since energy cannot be created from nothing, it must be distributed throughout the environment. Almost all systems on Earth rely mostly on solar energy.
To know more about energy transfer visit:
https://brainly.com/question/3022807
#SPJ4
Answer:
A: radiation
B: convection
C: conduction
Explanation:
right on Edge
what is the ph of the solution that is formed when 0.254 grams of sodium acetate is added to 50.00 ml of 0.122 m acetic acid (ka
The answer is pH = 4.83
Henderson - Hasselbalch equation
Sodium acetate is a salt of a weak acid (acetic acid) and a strong base (NaOH). It undergoes hydrolysis in
aqueous solutions.
CH3COONa + H2O → CH3COOH + Na+ + OH−
Acetic acid is weak acid and is partially dissociated whereas NaOH is a strong base and completely dissociated.
According to Henderson equation pH of acidic buffer is:
pH=pKa+log (Salt/Acid)
[Salt] = 0.254M
[Acid] = 50 * 0.122/1000 = 0.0061M
Substitute Values in above equation, we get: -
pH = 4.57 + log (0.254/0.0061)
pH = 4.57 + 0.26874
pH = 4.83
To learn more about Calculate pH of buffer solution
https://brainly.com/question/29573312
#SPJ4
determine the vaport pressure o a substance at 29 deg celcius whose normal bioling point is 76 deg celcius and has a delta h vap of 38.7 kj.mol
The vapor pressure of a substance at 29 °C whose normal boiling point is 76 °C and has a ΔHvap of 38.7 kJ mol is 94 mmHg
given that :
Temperature T1 = 76 °C = 349 K
Temperature T2 = 29 °C = 302 K
pressure P1 = 1 atm = 760 atm
pressure P2 = ?
R = 8.314 J/K mol
ΔHvap = 38.7 kJ mol = 38700 J mol
using the Clausius Clapeyron equation we get:
ln(P2 / P1 ) = -ΔHvap /R ( 1/ T2 - 1/ T1)
ln ( P2 / 1) = - 38700 / 8.314 ( 1/302 - 1/ 349)
ln(P2) = - 2.076
P2 = e^-2.076
P2 = 0.125 atm = 94 mmHg
The vapor pressure = 94 mmHg
To learn more about vapor pressure here
https://brainly.com/question/14214798
#SPJ4
T/F
The transportation term of sale known as Free on Board (FOB) origin requires that the seller legally retains ownership of the product from the point of origin until it reaches the buyers destination
True. Free on Board (FOB) is a term of sale that establishes who is responsible for the costs of shipping and receiving the goods.
The seller is legally responsible for the goods until they are loaded onto the shipping vessel and the buyer is responsible for the shipment from then on. This helps to ensure that the buyer and seller both understand who is responsible for what costs associated with the shipment.
The Role of Free on Board (FOB) in International TradeThe Free on Board (FOB) term of sale is an essential component of many international trade agreements. FOB is a legal term that establishes who is responsible for the costs of shipping and receiving goods. It is used to ensure that the buyer and seller both understand who is responsible for what costs associated with the shipment. This helps to ensure that both parties are protected in the case of any issues that may arise during the shipping process.
The FOB term of sale is especially beneficial for international trade. In the case of international trade, the seller is legally responsible for the goods until they are loaded onto the shipping vessel. This means that the seller must ensure that the goods are in good condition and fit for shipping. This helps to protect the buyer's interests and ensures that the goods are delivered in a timely and satisfactory manner.
Learn more about Free on Board (FOB) :
https://brainly.com/question/16000629
#SPJ4
heat is added to one of the two gases until the internal energies of the gases are equal. to which chamber does heat need to be added for the internal energies to be equal? explain.
As a result, as the gas's temperature T rises, its molecules move more quickly and its internal energy U rises (indicating that Δ U \Delta U ΔU is positive).
Describe a molecular example.A molecule is the smallest particle of any material that is composed of one or more elements and is present in the dataset independently while maintaining all of the substance's physical and chemical properties. Further atom division occurs within molecules. For instance, the atom and molecule of oxygen are represented by the letters O and O2, correspondingly.
What do you call molecules?A atom is the smallest element of something like a substance that keeps its content and properties. It is made up of two or more atoms that are joined together by chemical bonds. Chemistry is built on molecules. The material emblem and a subscript that denotes the number of protons are used to identify molecules.
To know more about molecules visit :
https://brainly.com/question/28931982
#SPJ4
in a polar covalent bond: select the correct answer below: electrons are shared unevenly electrons are shared evenly electrons are transferred from one atom to another depends on the elements involved in the bond
When the two atoms in such a covalent polar bond share the bond's electrons unequally.
What is electrons example?The smallest elemental component of an atom, the electron has a negative charge. In a neutral atom, there are an equal amount of protons and electrons. A electrons and one proton are all that the hydrogen atom has. On the contrary hand, the uranium atom possesses 92 protons, which means 92 electrons.
What do electrons do in an atom?The negatively charged components of an atom are called electrons. The total negative charge of an atom's electrons counteracts that positive charge of its protons inside the atomic nucleus.
To know more about electrons visit:
brainly.com/question/22299265
#SPJ4
How does an object's mass impact its mechanical energy?
How does an object's speed impact its mechanical energy?
Therefore, the mechanical energy of an object is proportional to its mass, its height, or its vertical position.
Mechanical energy depends on the position and motion of an object, and its force is the sum of its moving energy and its stored energy. That is, mechanical energy is produced when the potential energy of an object combines with its kinetic energy. The kinetic energy of a moving object is directly proportional to its mass, which is directly proportional to the square of its velocity.
This means that an object with twice the mass and the same velocity has twice the kinetic energy, and an object with the same mass and twice the velocity has four times the kinetic energy. Mechanical energy is defined as the ability of a body to do work. The amount of work an object can do depends on two things position and movement. Before delving further into mechanical energy we need to understand more about how the position and motion of an object affect its energy.
Learn more about Mechanical energy here:-https://brainly.com/question/28154924
#SPJ1
