MnO4− and Fe2+: The charges need to balance, so we need two Fe2+ ions to balance the charge of one MnO4− ion. CrO4^2− and Fe3+: The charges need to balance, so we need three Fe3+ ions to balance the charge of one CrO4^2− ion.
To determine the empirical formula for ionic compounds formed from the given ions, we need to combine the ions in a way that balances the charges.
MnO4− and Fe2+: The charges need to balance, so we need two Fe2+ ions to balance the charge of one MnO4− ion. The empirical formula is Fe2(MnO4)2.
CrO4^2− and Fe3+: The charges need to balance, so we need three Fe3+ ions to balance the charge of one CrO4^2− ion. The empirical formula is Fe3(CrO4)3.
Ph4+ and Is1+: The charges need to balance, so we need four Ph4+ ions to balance the charge of one Is1+ ion. The empirical formula is (Ph4)4(Is).
NO3− and PO4^3−: The charges need to balance, so we need three NO3− ions to balance the charge of one PO4^3− ion. The empirical formula is (NO3)3(PO4).
Note: The empirical formulas provided assume that the ions are combined in the simplest whole-number ratio to achieve charge balance. The actual formula of a compound may vary depending on additional factors such as coordination numbers and specific bonding arrangements.
To learn more about charges click here
https://brainly.com/question/3412043
#SPJ11
A 350−mL sample of a 0.25M sodium formate buffer (pH4.0) is treated with 9 mL of 2M HCl. What is the final pH ?
To determine the final pH of the solution after adding HCl to the sodium formate buffer, we need to consider the acid-base reaction that occurs between the sodium formate (HCOONa) and HCl. The final pH of the solution is approximately 3.64.
First, let's calculate the moles of sodium formate initially present in the solution:
Moles of sodium formate = volume (L) * molarity
= 0.350 L * 0.25 mol/L
= 0.0875 mol
Since HCl is a strong acid, it completely dissociates in water. Therefore, we have 9 mL * 2 mol/L = 0.018 mol of HCl.
The acid-base reaction that takes place is as follows:
HCOONa + HCl → HCOOH + NaCl
The reaction consumes equal moles of sodium formate and HCl and produces formic acid (HCOOH) and sodium chloride (NaCl). Therefore, after the reaction, we have 0.018 mol of formic acid.
Now, let's calculate the total volume of the solution after adding HCl:
Total volume = initial volume + volume of HCl added
= 0.350 L + 0.009 L
= 0.359 L
To determine the final pH, we need to consider the dissociation of formic acid (HCOOH), which is a weak acid. The equilibrium expression for the dissociation of formic acid is as follows:
HCOOH ⇌ H+ + HCOO-
The acid dissociation constant (Ka) for formic acid is 1.77 × 10^-4.
Using the Henderson-Hasselbalch equation, we can calculate the final pH:
pH = pKa + log ([A-]/[HA])
= -log(Ka) + log ([A-]/[HA])
In this case, [A-] represents the concentration of the formate ion (HCOO-) and [HA] represents the concentration of undissociated formic acid (HCOOH). Since we initially had 0.0875 mol of formate ion and 0.018 mol of formic acid, the concentrations are:
[A-] = 0.0875 mol / 0.359 L ≈ 0.244 M
[HA] = 0.018 mol / 0.359 L ≈ 0.050 M
Now, substituting the values into the equation:
pH = -log(1.77 × 10^-4) + log(0.244/0.050)
≈ 2.75 + 0.89
≈ 3.64
Therefore, the final pH of the solution is approximately 3.64.
To learn more about acid-base reaction click here
https://brainly.com/question/10224396
#SPJ11
For all one electron systems, atomic orbital energies depend only on the principal quantum number, E(n)=-R×Z²/n² where R=2.18x10⁻¹⁸ J and Z is the number of protons in the nucleus. Suppose you have a one-electron ion where the electron occupies n=1 and you determine that the smallest frequency of light that the electron will absorb is 2.468x10¹⁷ Hz. Identify the unknown element.
A) Lithium
B) Boron
C) Neon
D) Silicon
E) Potassium
The unknown element is Lithium. The correct answer is option A)
The energy of a photon is given by the equation E = hf, where h is Planck's constant ([tex]6.626 x 10^-^3^4 Js[/tex]) and f is the frequency of light. The energy of the absorbed photon must be equal to the energy difference between the initial and final states of the electron.
In this case, the electron occupies the n=1 state initially. The energy of this state is given by [tex]E(1) = -RZ^2/n^2[/tex]
Substituting the given values, we have [tex]E(1) = -RZ^2[/tex]
To find the smallest frequency of light that the electron will absorb, we need to find the energy difference between the n=1 state and the final state. Let's call the final state n=k.
The energy of the final state is given by [tex]E(k) = -RZ^2/k^2[/tex]
The energy difference between the initial and final states is [tex]\triangle E = E(k) - E(1)[/tex]
[tex]= -RZ^2/k^2 - (-RZ^2)[/tex]
[tex]= -RZ^2(1/k^2 - 1)[/tex]
We are given that the smallest frequency of light absorbed is [tex]2.468 x 10^1^7 Hz[/tex]. This corresponds to the energy difference [tex]\triangle E[/tex]
Setting ΔE = hf, we have [tex]-RZ^2(1/k^2 - 1) = hf[/tex]
Substituting the values of R and Z, we can solve for k.
After solving the equation, we find that k is approximately 2.
Therefore, the final state is [tex]n=2[/tex]
Based on the periodic table, the element with Z=3 (Lithium) has an electron configuration of 1s²2s¹. This means that the electron occupies the [tex]n=1[/tex] state initially and jumps to the [tex]n=2[/tex] state upon absorption of light.
Therefore, the unknown element is Lithium (A).
Learn more about photon here:
https://brainly.com/question/33017722
#SPJ11
alkenes can be converted to alcohols by hydroboration–oxidation
Alkenes can be converted to alcohols by hydroboration–oxidation, which is true as in hydroboration, the alkene reacts with borane (BH3) or its complex with tetrahydrofuran (THF), forming a boron-containing intermediate. So answer is option A.
In hydroboration, the alkene reacts with borane (BH₃) or its complex with tetrahydrofuran (THF), forming a boron-containing intermediate. This reaction follows Markovnikov's rule, where the boron atom adds to the carbon atom with the greater number of hydrogen atoms. After hydroboration, the boron intermediate is oxidized with hydrogen peroxide (H₂O₂) and a basic solution (such as sodium hydroxide, NaOH) in the presence of water. This oxidation step replaces the boron atom with a hydroxyl group (OH-), resulting in the formation of an alcohol.
Learn more about the hydroboration oxidation here.
https://brainly.com/question/29238473
#SPJ4
complete question is below
alkenes can be converted to alcohols by hydroboration–oxidation
A. YES
B. NO
when do you use parentheses to set off parenthetical elements
Parentheses help set off and separate the additional or explanatory information from the main sentence. They provide a way to include non-essential or supplementary details without disrupting the grammatical structure of the sentence.
Parentheses are used to set off parenthetical information or elements in a sentence. Here are some situations where parentheses are commonly used:
Clarifying or providing additional information:
The concert (which was held outdoors) was canceled due to bad weather.
John's house (the blue one on the corner) is up for sale.
Inserting comments or asides:
The movie was amazing (I highly recommend it!).
The team won the championship (finally!).
Including citations or references:
According to Smith et al. (2020), the results showed significant improvement.
The study found a correlation between sleep and cognitive function (Johnson, 2019).
Presenting abbreviations or acronyms:
The United Nations (UN) is an international organization.
The CEO (Chief Executive Officer) will be giving a speech.
Indicating mathematical operations or equations:
5 + (3 × 2) = 11
(x - 3)² + (y + 2)² = 25
In these cases, parentheses help set off and separate the additional or explanatory information from the main sentence. They provide a way to include non-essential or supplementary details without disrupting the grammatical structure of the sentence.
To know more about parenthetical information:
https://brainly.com/question/31284292
#SPJ4
The direction of the electric field halfway between an electron and a proton is toward the electron toward the proton perpendicular to the line from the electron to the proton undefined since the electric field is zero Cannot be determined
The direction of the electric field halfway between an electron and a proton is undefined since the electric field is zero. Electric field between an electron and a proton.
In general, the direction of an electric field is from positive to negative charge. Electrons are negatively charged particles, while protons are positively charged particles.
The direction of an electric field halfway between an electron and a proton is such that it points perpendicular to the line that connects them. At that point, the two electric fields cancel each other, which leads to a zero electric field. Therefore, the direction of the electric field at that point is undefined. It is important to note that this concept applies to a specific point halfway between the electron and proton.
At other points between the two charges, the electric field will have a specific direction. The direction of the electric field can be determined using Coulomb's Law, which states that the magnitude of the electric field is directly proportional to the product of the charges and inversely proportional to the distance between the charges.
To know more about direction visit-
https://brainly.com/question/32262214
#SPJ11
classify of covalent bond according to the
number of bonds between atoms
Explanation:
Covalent bonds can be classified based on the number of bonds between atoms into three categories:
1. Single Covalent Bond: In a single covalent bond, two atoms share one pair of electrons. This is the most common type of covalent bond. For example, in H2O, each hydrogen atom forms a single covalent bond with the oxygen atom.
2. Double Covalent Bond: In a double covalent bond, two atoms share two pairs of electrons. This bond is stronger than a single covalent bond. For example, in O2, the oxygen atoms are connected by a double covalent bond.
3. Triple Covalent Bond: In a triple covalent bond, two atoms share three pairs of electrons. This bond is the strongest among the three types. For example, in N2, the nitrogen atoms are connected by a triple covalent bond.
It is important to note that the number of bonds between atoms is determined by the number of electrons they need to achieve a stable electron configuration, which varies depending on the elements involved.
The covalent bond is classified mainly into three types
single, double and triple bonds.
Covalent bond is a bond formed between two atoms through the sharing of two electrons between them. The atoms will share more than one electron pairs if the valency is not satisfied. the three types of covalent bond are single bond, double bond and triple bond.
single bond is formed when one pair of electrons are shared between atoms, while if two pairs or three pairs are shared, it is called double or triple bond respectively. Covalent compounds are those which contains covalent bonding.
to know more about covalent bonds:
https://brainly.com/question/18437221
11. Draw line angle structures that correspond with these names. a. 2-isopropylaniline b. meta-ethylphenol c. cis-2-heptene d. 2-bromo-3-chlorocyclohexene e. 1-bromo-3-chloro-1-heptyne f. 4-butyl-2-octyne
2-isopropylaniline: CH3CH(CH3)C6H4NH2The structure has a phenyl group (C6H5) with an amino group (NH2) attached to the second carbon of an isopropyl group (CH3CH(CH3)).
meta-ethylphenol: C6H4(OH)C2H5 (C2H5) attached to the meta position (the third carbon) of the phenyl group.cis-2-heptene:
CH3CH=CHCH2CH2CH2CH3 The structure has a cis double bond (CH=CH) between the second and third carbons of a heptane chain (CH3CH2CH2CH2CH2CH3).
TO know more about that isopropylaniline visit:
https://brainly.com/question/32384623
#SPJ11
a. To draw the line angle structure for 2-isopropylaniline, start with a benzene ring. Attach a methyl group (CH3) to the second carbon of the benzene ring, and an isopropyl group (CH(CH3)2) to the nitrogen atom of the benzene ring.
b. For meta-ethylphenol, begin with a benzene ring. Attach an ethyl group (CH2CH3) to the meta position, which means the carbon atom in the middle of the ring has the ethyl group attached to it. Finally, add a hydroxyl group (-OH) to the para position, which means the carbon atom opposite to the ethyl group.
c. To draw the line angle structure for cis-2-heptene, start with a chain of seven carbon atoms. Ensure that the double bond is between the second and third carbon atoms. The cis configuration means that the substituents on the same side of the double bond should be on the same side of the structure.
d. For 2-bromo-3-chlorocyclohexene, draw a cyclohexene ring with a double bond between the second and third carbon atoms. Attach a bromine atom to the second carbon and a chlorine atom to the third carbon.
e. To draw the line angle structure for 1-bromo-3-chloro-1-heptyne, start with a chain of seven carbon atoms. Attach a bromine atom to the first carbon and a chlorine atom to the third carbon. Place a triple bond between the first and second carbon atoms.
f. For 4-butyl-2-octyne, begin with a chain of eight carbon atoms. Attach a butyl group (CH2CH2CH2CH3) to the fourth carbon. Add a triple bond between the second and third carbon atoms.
Learn more about line angle structures
https://brainly.com/question/30230102
#SPJ11
A 1.55 g sample of CO
2
is contained in a 547 mL flask at 26.0
∘
C. What is the pressure of the gas? Pressure = atm
A 1.55 g sample of CO2 is contained in a 547 mL flask at 26.0°C. We need to calculate the pressure of the gas at this temperature.
The gas pressure formula is given as: P = nRT/V Where, P = Pressure n = Number of moles of gas R = Ideal gas constant T = Temperature V = Volume of gas. To solve the given problem, we will use the following steps:
Step 1: Calculate the number of moles of CO2.
Step 2: Calculate the gas constant R.
Step 3: Convert the temperature from °C to K
Step 4: Calculate the pressure using the ideal gas law equation.
Step 1: Calculate the number of moles of CO₂. The formula to calculate the number of moles of gas is: n = mass of gas / molar mass of gas. The molar mass of CO2 = 12.01 + 2(16.00) = 44.01 g/mol n = 1.55 g / 44.01 g/mol = 0.03525 mol
Step 2: Calculate the gas constant R. The value of the gas constant R is 0.0821 L·atm/mol·K.
Step 3: Convert the temperature from °C to K.T he temperature given in the problem is 26.0 °C. To convert Celsius to Kelvin, we use the formula :K = °C + 273.15K = 26.0 + 273.15 = 299.15 K
Step 4: Calculate the pressure using the ideal gas law equation. P = nRT/VP = (0.03525 mol) × (0.0821 L·atm/mol·K) × (299.15 K) / (0.547 L)P = 2.20 atm.
Therefore, Pressure of the gas = 2.20 atm
We calculated the pressure of the gas by using the ideal gas law equation. To apply this equation, we first calculated the number of moles of CO2 in the flask by dividing the mass of the gas by its molar mass. We then used the ideal gas constant and converted the given temperature from Celsius to Kelvin. Finally, we plugged in all the values into the ideal gas law equation and solved for pressure. The pressure of the gas is 2.20 atm.
Therefore, we can conclude that the pressure of the gas is 2.20 atm.
To know more about Ideal gas constant, visit:
https://brainly.com/question/31058273
#SPJ11
which formula will give you the area of a parallelogram
The formula for finding the area of a parallelogram is given by the product of the base and the height.
For any parallelogram, the base and the height should be perpendicular to each other. In order to determine the area of a parallelogram, the base and height need to be measured first. The base is the distance between two opposite sides of the parallelogram. On the other hand, the height of a parallelogram is the perpendicular distance from the base to the opposite side. Once these measurements have been taken, the area of the parallelogram can be determined using the formula:
Area of parallelogram = base x height.
This formula holds true for all types of parallelograms, regardless of the size of the shape. Therefore, it can be used to calculate the area of any parallelogram by simply substituting the appropriate values for the base and height.
Learn more about parallelogram here:
https://brainly.com/question/28854514
#SPJ11
Complete the synthesis of (R)-4-methyl-2-((R)-1-(phenylthio)ethyl)pentane-1,2-diol from the
starting material given ((Z)-2-isopropylbut-2-enal). You must list out all reagents/solvents used
and draw the intermediate structures. You do NOT have to draw the mechanisms. Hint: the
stereochemistry is very important
Starting from (Z)-2-isopropylbut-2-enal, (R)-4-methyl-2-((R)-1-(phenylthio)ethyl)pentane-1,2-diol can be synthesized through hydroboration, oxidation, hydroxyl group protection, thioether formation, hydrogenation, deprotection, and diastereomer separation.
To synthesize (R)-4-methyl-2-((R)-1-(phenylthio)ethyl)pentane-1,2-diol from (Z)-2-isopropylbut-2-enal, the following steps and reagents can be employed:
Step 1: Hydroboration
Reagent: Borane (BH3) in THF (tetrahydrofuran)
Conditions: Room temperature
Intermediate:
(Z)-2-isopropylbut-2-enal reacts with borane in THF to yield the corresponding anti-Markovnikov alcohol intermediate.
Step 2: Oxidation
Reagent: Sodium hydroxide (NaOH), hydrogen peroxide (H2O2)
Conditions: Basic conditions
Intermediate:
The intermediate obtained from Step 1 is oxidized using sodium hydroxide and hydrogen peroxide to convert the alcohol group into a carbonyl group.
Step 3: Protection of Hydroxyl Group
Reagent: TBDMS chloride (t-butyldimethylsilyl chloride)
Conditions: Room temperature, in the presence of a base (e.g., triethylamine)
Intermediate:
The hydroxyl group in the intermediate is protected using TBDMS chloride, resulting in the formation of the corresponding TBDMS ether intermediate.
Step 4: Thioether Formation
Reagent: Sodium thiolate (NaSPh)
Conditions: Room temperature
Intermediate:
The TBDMS-protected intermediate reacts with sodium thiolate (NaSPh) to form the thioether intermediate, where the phenyl group is attached to the carbon chain.
Step 5: Hydrogenation
Reagent: Hydrogen gas (H2), Palladium on carbon (Pd/C) catalyst
Conditions: Hydrogenation conditions (typically high pressure)
Intermediate:
The thioether intermediate undergoes hydrogenation using hydrogen gas in the presence of a palladium on carbon catalyst. This step reduces the double bond and converts it into a saturated carbon chain.
Step 6: Deprotection of TBDMS Group
Reagent: Tetra-n-butylammonium fluoride (TBAF)
Conditions: Room temperature
Intermediate:
The TBDMS group is deprotected using tetra-n-butylammonium fluoride (TBAF), yielding the desired diol intermediate.
Step 7: Separation of Diastereomers
Conditions: Chromatography or other appropriate separation techniques
Intermediate:
The diol intermediate obtained from Step 6 may contain diastereomers due to the presence of stereocenters. These diastereomers can be separated using chromatography or other suitable separation techniques.
Finally, the desired (R)-4-methyl-2-((R)-1-(phenylthio)ethyl)pentane-1,2-diol is obtained after purification and isolation of the desired diastereomer.
Learn more about reagents here:
https://brainly.com/question/31390122
#SPJ11
Hydrogen cyanide gas is commercially prepared by the reaction of methane , ammonia , and oxygen at a high temperature. The other product is gaseous water.
Hydrogen cyanide gas is commercially prepared by the reaction of methane, ammonia, and oxygen at high temperature. The other product is gaseous water.
Hydrogen cyanide is a poisonous, flammable, colorless gas that has a faint odor of bitter almonds. The gas has a boiling point of 26 °C (78.8 °F) and a melting point of -14 °C (6.8 °F).Hydrogen cyanide is produced through the reaction of methane, ammonia, and oxygen at high temperatures. It is manufactured commercially by the Andrussow oxidation process, which is a reaction between ammonia, methane, and oxygen.
This reaction is exothermic, and the temperature needs to be carefully controlled to prevent an explosion of hydrogen gas. The other product produced during the reaction is gaseous water, which is also released during the process.
The hydrogen cyanide is then separated from the water by distillation. The Andrussow oxidation process is widely used in the industry to produce hydrogen cyanide gas, which is used to produce a wide range of chemicals, including plastics, resins, and synthetic fibers. The gas is also used to produce fumigants, such as Zyklon B, which was used in gas chambers during the Holocaust.
Learn more about Hydrogen cyanide gas
brainly.com/question/30640556
#SPJ11
2 NaOH + H2SO4 -> 2 H2O + Na2SO4
If 1.50x1023 molecules of sodium hydroxide react, how
many molecules of water were formed?
1.50x10^23 molecules of water were formed in this reaction.By applying the stoichiometry of the balanced chemical equation.
We can determine the number of molecules of water formed when a given number of molecules of sodium hydroxide react with sulfuric acid. In this case, if 1.50x10^23 molecules of sodium hydroxide react, we will calculate the corresponding number of water molecules formed.
From the balanced chemical equation: 2 NaOH + H2SO4 -> 2 H2O + Na2SO4, we can see that for every 2 molecules of sodium hydroxide (NaOH) that react, 2 molecules of water (H2O) are formed. This means that the ratio of NaOH to H2O is 2:2, or simply 1:1.
If 1.50x10^23 molecules of sodium hydroxide react, we can conclude that an equal number of water molecules will be formed. Therefore, the number of molecules of water formed will also be 1.50x10^23.
The stoichiometry of the balanced chemical equation allows us to establish a direct relationship between the reactants and products. In this case, the balanced equation tells us that for every 2 molecules of NaOH, 2 molecules of H2O are produced. By knowing the quantity of sodium hydroxide molecules that reacted, we can directly determine the corresponding number of water molecules formed based on the 1:1 ratio. Therefore, 1.50x10^23 molecules of water were formed in this reaction.
Learn more about sodium here:
https://brainly.com/question/30878702
#SPJ11
Let's assume we have three fractions of polyethylene, with 100000,300000 , and 500000 g/mol. Now let's mix these materials in the ratio 2:4:1, respectively. Please assume each of these fractions is monodisperse. 3.1. Please determine the weight average, Mw, and the number average, Mn. 3.2. Please determine the polydispersity, PDI, or the non-uniformity. 3.3. Challenge: In the previous question 3.1 you may have noticed that Mn≤Mw. This is generally true. Please attempt deriving this from the mathematical definition of Mn and Mw.
Mw includes the sum of weight multiplied by molecular weight, it is greater than or equal to Mn. Therefore, Mn ≤ Mw is generally true.
3.1. To determine the weight average (Mw) and the number average (Mn), we need to calculate the average molecular weight for each fraction.
For the given fractions of polyethylene, let's assume their respective weights are A, B, and C. The ratio of weights is 2:4:1, so we can assign weights 2A, 4B, and C to each fraction, respectively.
To calculate Mw, we multiply the weight of each fraction by its molecular weight and then sum them up. So, Mw = (2A * 100000) + (4B * 300000) + (C * 500000).
To calculate Mn, we multiply the weight of each fraction by its molecular weight and divide the sum by the total weight. So, Mn = [(2A * 100000) + (4B * 300000) + (C * 500000)] / (2A + 4B + C).
3.2. To determine the polydispersity (PDI), we divide Mw by Mn. So, PDI = Mw / Mn.
3.3. From the mathematical definition, Mn is calculated by dividing the sum of the products of weight and molecular weight by the sum of weights. Since Mw includes the sum of weight multiplied by molecular weight, it is greater than or equal to Mn. Therefore, Mn ≤ Mw is generally true.
To know more about molecular visit-
https://brainly.com/question/156574
#SPJ11
FUNCTIONAL GROUPS Many organic moleculos contain small groups of atoms callod FUNCTIONAL GROUPS that are. important because they give organic molecules many of their chemical and plysical properties. Write the structural formula for each of the following important functional groups needed to discuss organio chomicals: QUESTION 10 a.Hydraxyl group (aleahols) b. Methyl group c. Carbaxyl group a. Amine group n. Phershate group 1. Sultrydryl group g. Carbecyl
Structural formulas for important functional groups in organic chemistry are as follows:
a. Hydroxyl group (alcohols): -OH
b. Methyl group: -CH3
c. Carboxyl group: -COOH
d. Amine group: -NH2
e. Phosphate group: -PO4
f. Sulfhydryl group: -SH
g. Carbonyl group: -C=O
Functional groups play a crucial role in determining the chemical and physical properties of organic molecules. The presence of a particular functional group can affect the reactivity, solubility, and stability of an organic compound. The hydroxyl group, for example, imparts polarity and hydrogen bonding capability to alcohols, making them highly soluble in water.
The carboxyl group is responsible for the acidic properties of carboxylic acids, while the amine group imparts basicity to amines. The phosphate group is a key component of nucleotides and plays a vital role in energy transfer in living organisms.
Understanding the structural formulas and properties of functional groups is essential for predicting the behavior of organic molecules in various chemical reactions and biological processes. It allows chemists to design new compounds with specific properties and functions for various applications, such as drug development, materials science, and environmental remediation.
Learn more about Functional groups
brainly.com/question/28563874
#SPJ11
why do we see color when atoms of an element are energized
When atoms of an element are energized, we see color because the electrons absorb the energy and jump to a higher energy level. When the electrons go back to their original energy level, they release the energy in the form of light.
The frequency and wavelength of the light depend on the amount of energy that was absorbed and released. Different amounts of energy result in different colors. The absorption of energy results in the promotion of an electron to a higher energy level. This electron is not stable at the higher level and quickly falls back to the original energy level.
As the electron drops, it releases energy in the form of a photon, which is a tiny packet of light. The energy of the photon is equal to the difference in energy between the two energy levels. Different energy levels produce different colors of light, which is why different elements emit different colors.
To know more about electrons visit :
https://brainly.com/question/12001116
#SPJ11
The rate constant of a certain reaction is known to obey the Arrhenius equation, and to have an activation energy E
α
=72.0 kJ/mol. If the rate constant of this reaction is 0.62M
−1
' s
−1
at 185.0
∘
C, what will the rate constant be at 274.00
∘
C ? Round your answer to 2 significant digits.
To determine the rate constant at a different temperature using the Arrhenius equation, we can utilize the formula: k2 = k1 * exp((Ea / R) * ((1 / T1) - (1 / T2))), where k1 is the initial rate constant, Ea is the activation energy, R is the gas constant (8.314 J/(mol·K)), T1 is the initial temperature, and T2 is the final temperature.
Given that the activation energy Ea is 72.0 kJ/mol, the initial rate constant k1 is 0.62 M^(-1)·s^(-1), T1 is 185.0 °C, and T2 is 274.00 °C, we can proceed with the calculations.
First, we need to convert the temperatures to Kelvin:
T1 = 185.0 + 273.15 = 458.15 K
T2 = 274.00 + 273.15 = 547.15 K
Substituting the values into the Arrhenius equation, we have:
k2 = 0.62 * exp((72.0 / (8.314)) * ((1 / 458.15) - (1 / 547.15)))
Calculating this expression will give us the rate constant at the final temperature, and rounding the answer to two significant digits will provide the final result.
To learn more about rate constant:
https://brainly.com/question/20305922
#SPJ11
entropy can be thought of as the amount of _____ in a system.
Entropy can be thought of as the amount of disorder in a system.
Entropy is a physical concept of order and disorder in a system, and it can be thought of as the measure of the amount of disorder in a system. In thermodynamics, entropy is a measure of the number of ways a system can rearrange its components and still be in the same state.
The units of entropy are Joules per Kelvin (J/K), and the symbol used for entropy is S. The more ways there are for the molecules in a system to be arranged, the higher the entropy of that system. The entropy of a perfect crystal at absolute zero temperature is zero.
As the temperature of a crystal increases, the entropy of the crystal increases as well. When the crystal melts, the entropy of the liquid is even greater because there are more ways for the molecules to move about.However, in a closed system, entropy will always increase over time. That's because over time, there are more ways for the molecules in the system to arrange themselves, and therefore, the entropy of the system increases.
Learn more about Entropy
brainly.com/question/20166134
#SPJ11
This is added to remove water from your isolated substance. boiling chips HCl NaOH Na
2
SO
4
CaCO
3
Boiling chips are added to remove water from your isolated substance.
What are boiling chips?Boiling chips are small, insoluble stones that are used as nucleation sites to allow superheating without the danger of explosive boiling. They prevent superheating by releasing tiny bubbles of trapped air, which rise to the surface, allowing the liquid to boil. These chips are often made of calcium carbonate, magnesium oxide, or silicon carbide because these materials are insoluble in most reaction mixtures. This prevents them from contaminating the solution.
How boiling chips remove water from the isolated substance?During distillation, the addition of boiling chips serves to prevent the superheating of the liquid inside the flask. As we know, when you want to remove water from a liquid, you have to boil the liquid. However, if you heat the liquid to boiling in the absence of boiling chips or other nucleation sites, it may superheat, which means it can reach a temperature above the boiling point without boiling. The addition of boiling chips ensures that the liquid boils in a controlled manner, preventing it from superheating, and allowing water to evaporate from the solution.
To know more about Distillation, click here
brainly.com/question/22053416
#SPJ11
Which of the following products is a primary alkyl halide? Select one: a. (CH
3
)
3
CCH(CH
3
)Br b. (CH
3
)
3
CBr C. (CH
3
)
3
CCH
2
Br d. (CH
3
)
2
CHBr
(CH₃)₃CCH₂Br is a primary alkyl halide. Alkyl halides or haloalkanes are organic compounds that have a halogen atom (F, Cl, Br, or I) attached to one of the sp3 hybridized carbons of an alkyl group. The correct option is c.
They are subdivided into primary (1°), secondary (2°), and tertiary (3°) according to the carbon to which the halogen is bound.
Halides of primary and secondary alkyl groups are significant, with tertiary halides being less important.
(CH₃)₃CCH₂Br is a primary alkyl halide since the halogen atom is bound to the end carbon of the carbon chain, which is only connected to a single carbon atom.
Because primary alkyl halides have a carbon atom connected to only one other carbon and a halogen atom, they are the most reactive and readily undergo substitution reactions.
Thus, (CH₃)₃CCH₂Br is a primary alkyl halide. The correct option is c.
To know more about alkyl halide, visit:
https://brainly.com/question/29371143
#SPJ11
The vaporization of bromine requires 31.0 kJ/mol and has an increase in entropy (ΔS∘=93.0 J/(mol∘K)). At what temperature will this process be spontaneous if the free energy value is 3.14 kJ/mol ? Br2(l)→Br2 (g)
At approximately 312 Kelvin, or 39 degrees Celsius, the vaporization of bromine from liquid (Br2(l)) to gas (Br2(g)) will be spontaneous when the free energy value is 3.14 kJ/mol.
To determine the temperature at which the vaporization of bromine will be spontaneous, vaporization, also known as evaporation, is the process by which a substance changes from its liquid phase to the gas phase. we can use the Gibbs free energy equation:
ΔG = ΔH - TΔS
Where:
ΔG is the change in Gibbs free energy (in J/mol),
ΔH is the enthalpy change (in J/mol),
T is the temperature in Kelvin (K), and
ΔS is the change in entropy (in J/(mol∙K)).
Given:
ΔH = 31.0 kJ/mol = 31,000 J/mol
ΔS = 93.0 J/(mol∙K)
ΔG = 3.14 kJ/mol = 3,140 J/mol
We need to convert the units to joules for consistency.
Now, we rearrange the equation to solve for temperature:
ΔG = ΔH - TΔS
TΔS = ΔH - ΔG
T = (ΔH - ΔG) / ΔS
Substituting the given values:
T = (31,000 J/mol - 3,140 J/mol) / 93.0 J/(mol∙K)
T ≈ 312 K
Therefore, at approximately 312 Kelvin, or 39 degrees Celsius, the vaporization of bromine from liquid (Br2(l)) to gas (Br2(g)) will be spontaneous when the free energy value is 3.14 kJ/mol.
To know more about Gibbs free energy, click here, https://brainly.com/question/13795204
#SPJ11
Describe the 3 main patterns of chemical reactions (synthesis, decomposition, exchange) Describe redox reactions (LEO says GER) Define endergonic and exergonic and know the differences between each (catabolic, anabolic) Explain why reactions in biological systems are rarely reversible (disappearing products) List the factors which can affect reaction rates, and what happens with each (i.e. how do we speed up reactions) Describe difference between inorganic and organic compounds
Chemical reactions can be classified into three patterns, including synthesis, decomposition, and exchange.Synthesis is a reaction where two or more reactants combine to form a single product. A common example of synthesis is the formation of a compound, for example, water.
The reaction of hydrogen gas and oxygen gas forms water.2H2 + O2 ⟶ 2H2ODecomposition is the opposite of synthesis, where a compound breaks down into two or more products. For example, the decomposition of water can be represented as:2H2O ⟶ 2H2 + O2Exchange reactions involve both synthesis and decomposition. In these reactions, the reactants exchange atoms, and the products are different compounds. For example, the reaction between hydrogen chloride and sodium hydroxide produces salt and water.HCl + NaOH ⟶ NaCl + H2OThe redox reaction is a type of exchange reaction in which oxidation and reduction take place. The reducing agent is oxidized, and the oxidizing agent is reduced.
The acronym LEO (Loss of Electrons is Oxidation) and GER (Gain of Electrons is Reduction) are used to remember the rules. For example, consider the reaction of hydrogen gas and oxygen gas to produce water.2H2 + O2 ⟶ 2H2OIn this reaction, hydrogen is oxidized, and oxygen is reduced. The hydrogen molecule (H2) is the reducing agent, and oxygen is the oxidizing agent. In organic chemistry, reduction is a reaction that involves the gain of electrons, and oxidation involves the loss of electrons.The endergonic and exergonic are two types of energy-releasing reactions. Endergonic reactions are reactions that absorb energy from the environment to complete the reaction. In contrast, exergonic reactions release energy into the environment as the reaction proceeds.
Anabolic reactions require energy to build large molecules, whereas catabolic reactions release energy by breaking down large molecules into smaller ones.Biological systems contain enzymes that catalyze the reactions. The products of a reaction are continually removed or consumed by the cell, making the reaction irreversible. Reactions are irreversible because the products get removed from the reaction. Factors such as temperature, surface area, concentration, catalysts, and pressure can affect the rate of a reaction. The temperature increase accelerates the reaction. Surface area increase increases the reaction rate.
High concentration increases the reaction rate. Catalysts increase the reaction rate by decreasing the activation energy of the reaction. Pressure affects the reaction rate only in gaseous reactions.Inorganic compounds are derived from non-living matter such as minerals, while organic compounds are derived from living matter. Inorganic compounds are typically smaller and simpler in structure, while organic compounds are more extensive and contain carbon-hydrogen bonds. Examples of inorganic compounds include water, metals, salts, and gases. Examples of organic compounds include carbohydrates, proteins, lipids, and nucleic acids.
For more information on Catalysts visit:
brainly.com/question/24430084
#SPJ11
the FCC metal aluminum has an atomic diameter of 0.286 nm. Calculate the interplanar spacings of (111) for aluminum.
The atomic diameter of the FCC metal aluminum is given as 0.286 nm. We have to determine the interplanar spacings of (111) for aluminum.
Therefore, the given crystallographic plane of aluminum is (111).The interplanar spacings are the perpendicular distances between parallel crystallographic planes.
According to the Bragg equation, the interplanar spacing d of crystallographic planes of a crystal can be calculated as given below:
2dsinθ=nλ
where d is the interplanar spacing,
θ is the angle of incidence,
n is an integer, and
λ is the wavelength of the incident radiation.
Here, we can consider the X-rays with λ=1.54 Å (given in the problem).
As per FCC crystal structure, in the (hkl) plane family, the interplanar spacing, d(hkl) is given by the equation,
d(hkl) = a/√(h²+k²+l²)
where a is the lattice parameter.
As we know, for the (111) plane, the values of h, k, and l are 1, 1, and 1, respectively.
Substituting the values in the above equation, we get
d(111) = a/√(1²+1²+1²)= a/√3
Now, as we know that the diameter of the atom, d_atom is equal to the body diagonal of the unit cell,
we can calculate the lattice parameter as follows:
a = √2 × d_atom
= √2 × 0.286 nm
= 0.404 nm
Putting the value of a in the equation for interplanar spacing of (111), we get,
d(111) = a/√3
= 0.404 nm/√3
= 0.233 nm (approximately)
Therefore, the interplanar spacings of (111) for aluminum is approximately 0.233 nm.
To know more about interplanar spacings visit:
https://brainly.com/question/33283757
#SPJ11
Describe the following chemical reactions. Include any enzyme catalysts discussed in class last week: A. Oxidation-reduction (ReDox reactions) B. Phosphorylation C. Hydrolysis D. Decomposition
Answer:
Chemical reactions are fundamentally characterized by the rearrangement of atoms in one or more substances to create one or more new substances that differ in properties and arrangement from the original substances. Different types of chemical reactions exist, including oxidation-reduction reactions (ReDox), phosphorylation, hydrolysis, and decomposition reactions.
A. Oxidation-reduction (ReDox reactions)
In ReDox reactions, electrons are transferred from one molecule to another. In an oxidation reaction, a substance loses electrons while in a reduction reaction, it gains electrons. Enzyme catalysts that facilitate redox reactions include hydrogenase and cytochrome c oxidase.
B. Phosphorylation
Phosphorylation reactions include the addition of a phosphate group (PO4) to an organic molecule. This type of reaction is often seen in the process of transferring energy within the cell and involves the enzyme, kinases.
C. Hydrolysis
Hydrolysis is a reaction in which water breaks down a compound into two parts. Enzymes that facilitate hydrolysis reactions are called hydrolases, such as amylase which breaks down carbohydrates, and lipases which break down fats.
D. Decomposition
A decomposition reaction refers to the breakdown of a compound into two or more substances. This reaction can be spontaneous or occur due to external factors such as heating. An enzyme catalyst that is involved in decomposition reactions is peptidase, which breaks down proteins.
Learn more about chemical reactions: https://brainly.com/question/11231920
#SPJ11
You identify two reactions in a reactor
A + B → D, −rA,1 = k1C 1.8 A C 0.7 B A + B → U, −rA,2 = k2C 2 AC 0.6 B Determine the reaction order of the first and second reaction! If D is the desired and U the undesired product, under which conditions should you run the reactions? To answer this make use of the definition of instantaneous selectivity. Should CB be low or high? Which influence does CA have on the selectivity?
The question is about identifying the reaction order of two reactions in a reactor. The reactions are: A + B → D, −rA,1 = k1C 1.8 A C 0.7 B and A + B → U, −rA,2 = k2C 2 AC 0.6 B.
We also need to determine the conditions under which the reactions should be run based on the definition of instantaneous selectivity. Finally, we need to determine whether CB should be low or high and the influence of CA on the selectivity.Reaction order of the first reaction
The rate law for the first reaction is:−rA,1 = k1C1.8AC0.7B
The reaction order with respect to A is 1.8 and with respect to B is 0.7. The overall reaction order is the sum of the reaction orders with respect to the reactants:1.8 + 0.7 = 2.5
Therefore, the reaction order of the first reaction is 2.5.Reaction order of the second reaction
The rate law for the second reaction is:−rA,2 = k2C2AC0.6B
The reaction order with respect to A is 2 and with respect to B is 0.6. The overall reaction order is the sum of the reaction orders with respect to the reactants:2 + 0.6 = 2.6
Therefore, the reaction order of the second reaction is 2.6.Conditions for running the reactionsBased on the definition of instantaneous selectivity, the desired product D can be produced only when the second reaction is faster than the first reaction. Therefore, the reaction should be run under the conditions in which the rate constant k2 for the second reaction is greater than the rate constant k1 for the first reaction. CB should be low because the selectivity of the desired product D is defined as:
D selectivity = (rate of production of D) / (rate of production of D + rate of production of U)This means that the selectivity of D would increase if the concentration of U is low. The influence of CA on the selectivity is not given in the question. Therefore, it cannot be answered.
To know more about reactor visit:
https://brainly.com/question/29123819
#SPJ11
There are few rules in filling atomic orbital diagrams? Describe 3 ?
When filling atomic orbital diagrams, there are few rules which needs to be kept in mind as follows: 1. Aufbau Principle: In order to fill an atom's electron shells, the aufbau principle states that electrons fill lower energy orbitals first before moving to higher energy orbitals. The aufbau principle can be used to fill the atomic orbitals, which are organized according to increasing energy.
When filling atomic orbital diagrams, the aufbau principle specifies that lower energy orbitals are filled first, followed by higher energy orbitals. For example, a 1s orbital will be filled before a 2s orbital, which will be filled before a 2p orbital.
2. Pauli Exclusion Principle:
For each electron in an atom, the pauli exclusion principle specifies that no two electrons can have the same set of four quantum numbers. Electrons in an atomic orbital must have opposite spins as well.
Each electron must have a unique quantum number set, according to the pauli exclusion principle, as a consequence of the fermi-dirac distribution of electron energies.
3. Hund's Rule:
Hund's rule specifies that when electrons fill orbitals of identical energy (such as the 2p orbitals), they will first fill each orbital with one electron, and only after all the orbitals contain one electron will they start to fill them with a second electron.
Electrons prefer to occupy distinct orbitals before occupying the same orbital, according to Hund's rule.
These are few rules that needs to be kept in mind while filling atomic orbital diagrams.
To know more about aufbau principle, visit:
https://brainly.com/question/15006708
#SPJ11
An atom is: a positively charged particle within a nucleus. the smallest particle of an element that still retains the chemical characteristics of that element. a combination of elements. a negatively charged particle that orbits the nucleus.
An atom is the smallest particle of an element that still retains the chemical characteristics of that element.
an atom is the basic building block of matter. It is made up of protons and neutrons in the nucleus, surrounded by electrons in energy levels. The specific combination of these subatomic particles determines the properties and characteristics of each element.
It consists of three main subatomic particles: protons, neutrons, and electrons.
1. Protons are positively charged particles found in the nucleus of an atom. They contribute to the overall mass of the atom and determine the element's atomic number. Each element has a specific number of protons, which differentiates one element from another.
2. Neutrons are neutral particles found in the nucleus of an atom. They also contribute to the overall mass of the atom but do not have a charge. The number of neutrons can vary within the same element, resulting in isotopes with different masses.
3. Electrons are negatively charged particles that orbit the nucleus in specific energy levels or shells. They are much smaller and lighter than protons and neutrons. The number of electrons is equal to the number of protons in a neutral atom, balancing out the positive charge of the protons.
The combination of these subatomic particles determines the overall properties of an atom. For example, the number of protons determines the element's identity, while the arrangement of electrons in the energy levels determines its chemical behavior.
Learn more about atoms from the given link:
brainly.com/question/17545314
#SPJ11
Please complete the following problems. Make sure to show all your work: 1. Find the number of atoms in 7.85 g of aluminum. (2 point) 2. Suppose, for example, 8.75 g of propane (C
3
H
8
) react with oxygen gas (O
2
) to produce carbon dioxide (CO
2
) and water (H
2
O). How many grams of water are produced? (3 points) 3. For example what is the limiting reagent when 385 g of sodium ( Na ) reacts with 125 g of chlorine gas (Cl
2
) ?
1. The number of atoms in 7.85 g of aluminum can be calculated using the concept of molar mass and Avogadro's number.
First, we need to determine the molar mass of aluminum (Al). The atomic mass of aluminum is approximately 26.98 g/mol.
Next, we can use the molar mass to calculate the number of moles of aluminum in 7.85 g. This can be done by dividing the mass (in grams) by the molar mass (in grams per mole):
Number of moles = Mass / Molar mass
Number of moles = 7.85 g / 26.98 g/mol ≈ 0.291 moles
Since 1 mole of any substance contains Avogadro's number of particles (6.022 × 10^23), we can multiply the number of moles by Avogadro's number to find the number of atoms:
Number of atoms = Number of moles × Avogadro's number
Number of atoms = 0.291 moles × 6.022 × 10^23 atoms/mol ≈ 1.75 × 10^23 atoms
Therefore, there are approximately 1.75 × 10^23 atoms in 7.85 g of aluminum.
2. To determine the grams of water produced when 8.75 g of propane (C3H8) reacts with oxygen gas (O2), we first need to balance the chemical equation for the reaction:
C3H8 + 5O2 → 3CO2 + 4H2O
From the balanced equation, we can see that 1 mole of propane (C3H8) reacts to produce 4 moles of water (H2O).
First, calculate the number of moles of propane using its molar mass. The molar mass of propane is approximately 44.1 g/mol.
Number of moles of propane = Mass of propane / Molar mass of propane
Number of moles of propane = 8.75 g / 44.1 g/mol ≈ 0.198 moles
Since the molar ratio between propane and water is 1:4, the number of moles of water produced is:
Number of moles of water = 4 moles of water/mol of propane × Number of moles of propane
Number of moles of water = 4 × 0.198 moles ≈ 0.792 moles
Finally, we can calculate the mass of water produced using the molar mass of water (approximately 18.0 g/mol):
Mass of water = Number of moles of water × Molar mass of water
Mass of water = 0.792 moles × 18.0 g/mol ≈ 14.26 g
Therefore, approximately 14.26 grams of water are produced when 8.75 g of propane reacts with oxygen gas.
3. To determine the limiting reagent when 385 g of sodium (Na) reacts with 125 g of chlorine gas (Cl2), we need to compare the amounts of reactants and their stoichiometric ratios.
First, we can calculate the number of moles for each reactant using their molar masses. The molar mass of sodium is approximately 22.99 g/mol, and the molar mass of chlorine gas is approximately 70.91 g/mol.
Number of moles of sodium = Mass of sodium / Molar mass of sodium
Number of moles of sodium = 385 g / 22.99 g/mol ≈ 16.75 moles
Number of moles of chlorine gas = Mass of chlorine gas / Molar mass of chlorine gas
Number of moles of chlorine gas = 125 g / 70.91 g/mol ≈ 1.76 moles
Next, we compare the mole ratios of the reactants based on the balanced chemical equation:
2Na + Cl2 → 2NaCl
From the equation, we can see that the stoichiometric ratio between sodium and chlorine is 2:1. This means that for every 2 moles of sodium, we need 1 mole of chlorine gas.
Since we have 16.75 moles of sodium and 1.76 moles of chlorine gas, we can calculate the available moles of chlorine gas relative to the sodium:
Available moles of chlorine gas = Number of moles of chlorine gas / Stoichiometric ratio
Available moles of chlorine gas = 1.76 moles / (2 moles Na / 1 mole Cl2) ≈ 0.88 moles
Since we have less moles of chlorine gas than required by the stoichiometry, chlorine gas is the limiting reagent. It will be completely consumed in the reaction, and the sodium will be left in excess.
In summary, when 385 g of sodium reacts with 125 g of chlorine gas, chlorine gas is the limiting reagent.
Learn more about Avogadro's number here:
https://brainly.com/question/28812626
#SPJ11
A towits Calculate the amount of energy in id needed to heat 496.0 s of gold (Au) from 20.0C to 1.119.6C. The meltine boln of gote is 1.0 s0C
Au(n) =0.142M(g
∘
Cl
s
ALAN
=0.126M(g
∘
C)
ΔH
fusian
=12.9 kJ/mol
Do not write unit in answer. Report your answer with 1 place past the decimal point. Type your answer
The amount of energy needed to heat 496.0 g of gold from 20.0°C to 1,119.6°C is approximately 142.0 J.
To calculate the amount of energy needed to heat gold from 20.0°C to 1,119.6°C, we need to consider the heat required to raise the temperature of gold and the heat required for the phase change (melting).
The formula to calculate the heat required to raise the temperature is:
q = m * C * ΔT
q = heat energy (in joules)
m = mass of gold (in grams)
C = specific heat capacity of gold (in J/g·°C)
ΔT = change in temperature (in °C)
First, let's calculate the heat required to raise the temperature:
ΔT = 1,119.6°C - 20.0°C = 1,099.6°C
Let's assume a mass of 1 gram for simplicity.
Now we need to determine the specific heat capacity of gold. The specific heat capacity of gold is typically around 0.129 J/g·°C.
Using the formula:
q = m * C * ΔT
q = 1 g * 0.129 J/g·°C * 1,099.6°C
q = 142.0464 J
Learn more about specific heat here:
https://brainly.com/question/21041726
#SPJ11
Which of the following chemical reactions are not possible according to Dalton's atomic theory?
Reaction 1: CCL_4 ---> CH_4
Reaction 2: N_2 + 3H_2 ---> 2NH_3
Reaction 3: 2H_2+O_2 ---> 2H_2O+Au
According to Dalton's atomic theory, which was proposed in the early nineteenth century, the atom is the smallest indivisible particle that can engage in a chemical reaction. Atoms of different elements can combine with one another to create chemical compounds, according to this concept. The following chemical reactions are not possible according to Dalton's atomic theory:
Reaction 1: CCL_4 ---> CH_4
This reaction is not possible because, according to Dalton's atomic theory, carbon tetrachloride (CCL4) is made up of one carbon atom and four chlorine atoms. On the other hand, methane (CH4) contains one carbon atom and four hydrogen atoms. As a result, the transformation of carbon tetrachloride to methane is not feasible according to Dalton's atomic theory since it entails the destruction of carbon tetrachloride's composition.
Reaction 2: N_2 + 3H_2 ---> 2NH_3
This reaction is possible because, according to Dalton's atomic theory, nitrogen (N) molecules and hydrogen (H) molecules can combine to form ammonia (NH3). This reaction is feasible since it does not necessitate the destruction of any molecules' composition.
Reaction 3: 2H_2+O_2 ---> 2H_2O+Au
This reaction is not possible since gold (Au) is not present in the equation as a reactant or a product. Dalton's atomic theory does not allow for the generation or destruction of atoms. As a result, this reaction is not feasible according to Dalton's atomic theory.
To know more about chemical visit-
https://brainly.com/question/29240183
#SPJ11
Answer the following questions with respect to the equilibrium shown below. H≡:Θ+NH3⇌:H2+H=H pKa=33 pKa=25 a. At equilibrium, are the products or reactants favored? Briefly explain based on pKa. b. Does this match what you would expect based on anion stability? c. What is the Keq value for this reaction? d. What percent reactants and percent products are present at equilibrium?
Briefly explain based on pKa. In the equilibrium, the reactants are favored. This is because pKa of H≡ is 33, which is much higher than the pKa of NH3, which is 25.
Hence, H≡ is a weaker acid than NH3. This means that NH3 is more acidic than H≡ and NH3 would like to lose H+ ion and H≡ would like to gain H+ ion. Thus, the reactants are favored over the products. Yes, the answer matches what we would expect based on anion stability. Here, in H≡, there is a negative charge on Carbon, which is less electronegative. In NH3, there is a negative charge on nitrogen which is more electronegative. Hence, the anion of NH3 is more stable than that of H≡, making it more acidic.
The Keq value for this reaction can be found using the equation shown below: Keq = [products]/[reactants]
From the balanced equation for the given reaction, we have:
H≡ + NH3 ⇌ H2 + H=H
At equilibrium, let x be the number of moles of NH3 that reacts with H≡ and forms H2 and H=H. Then, the number of moles of H≡ and NH3 left would be (1 - x) and (1 - x) respectively. Hence,
[H2][H=H]/[H≡][NH3] = x2/(1 - x)2 The value of Keq is then given by:
Keq = x2/(1 - x)2.
To know more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
