The arrow will take approximately 1.4 seconds to hit the ground. This can be determined by analyzing the vertical motion of the arrow and considering the effects of gravity.
When the arrow is shot horizontally, its initial vertical velocity is zero since it is only moving horizontally. The only force acting on the arrow in the vertical direction is gravity, which causes it to accelerate downwards at a rate of 9.8 m/s².
Using the equation of motion for vertical motion, h = ut + (1/2)gt², where h is the vertical displacement (6.2 m), u is the initial vertical velocity (0 m/s), g is the acceleration due to gravity (-9.8 m/s²), and t is the time taken, we can rearrange the equation to solve for t.
Rearranging the equation gives us t² = (2h/g), which simplifies to t = √(2h/g). Substituting the given values, we have t = √(2 * 6.2 / 9.8) ≈ 1.4 seconds.
Therefore, the arrow will take approximately 1.4 seconds to hit the ground when shot horizontally from a height of 6.2 meters above the ground, ignoring friction.
To learn more about Motion click here:
brainly.com/question/33317467
#SPJ11
A dipole is formed by point charges +3.5 μC and -3.5 μC placed on the x axis at (0.30 m , 0) and (-0.30 m , 0), respectively.
At what positions on the x axis does the potential have the value 7.3×105 V ?
x1, x2 = _____ m
A dipole is formed by point charges +3.5 μC and -3.5 μC placed on the x axis at (0.30 m , 0) and (-0.30 m , 0), respectively.The expression for the electric potential due to the point charges along the x-axis is given by;V=kq1/x1+kq2/x2where,k=9.0×10^9 Nm²/C²q1=+3.5 μCq2=-3.5 μCV=7.3×105 VX-axis coordinates of the charges are x1=0.30 m and x2=-0.30 m.
Substitute the given values in the above expression, V=kq1/x1+kq2/x2=9.0×10^9×3.5×10⁻⁶/|x1|+9.0×10^9×3.5×10⁻⁶/|x2|=9.0×10^9×3.5×10⁻⁶(|x1|+|x2|)/|x1x2|=7.3×10⁵On simplifying, we get,(|x1|+|x2|)/|x1x2|=8.11x1x2=x1(x1+x2)=9.0×10^9×3.5×10⁻⁶/7.3×10⁵=4.32×10⁻⁴Solve for x2,x2=-x1-x2=-0.3-0.3= -0.6mx1+x2=0.432x1-0.6=0x1=1.39m. Substitute the value of x1 in x1+x2=0.432,We get,x2= -1.39m.Thus, x1=1.39m and x2=-1.39m.
Learn more about dipole:
brainly.com/question/20813317
#SPJ11
Question 11 (1 point) B I A current (1) moves west through the magnetic field shown in the diagram, above. What is the direction of the magnetic force on the wire? into page O out of page O north O so
The right-hand rule is a convention used to determine the relationship between the direction of the current, the magnetic field, and the resulting magnetic force. The direction of the magnetic force on a current-carrying wire can be determined using the right-hand rule. In this case, the current is moving west through the magnetic field, which is shown as directed into the page.
To apply the right-hand rule, follow these steps:
Extend your right hand and point your thumb in the direction of the current. In this case, the current is moving west, so your thumb points towards the left.
Curl your fingers towards the center of the page, following the direction of the magnetic field. In this case, the magnetic field is directed into the page, represented by a dot in the center of the circle. So, curl your fingers inward.
The direction in which your fingers curl represents the direction of the magnetic force acting on the wire. In this case, your fingers curl in the northward direction.
Therefore, according to the right-hand rule, the magnetic force on the wire is directed northward.
The right-hand rule is a convention used to determine the relationship between the direction of the current, the magnetic field, and the resulting magnetic force. By aligning your thumb with the current, and your fingers with the magnetic field, you can determine the direction of the magnetic force. In this case, the westward current and the into-the-page magnetic field result in a northward magnetic force on the wire. Understanding the right-hand rule is essential in analyzing the interactions between currents and magnetic fields and is widely used in electromagnetism and magnetic field applications.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
90 90 Strontium 38 Sr has a half-life of 29.1 yr. It is chemically similar to calcium, enters the body through the food chain, and collects in the bones. Consequently, 3g Sr is a particularly serious health hazard. How long (in years) will it take for 99.9328% of the 2: Sr released in a nuclear reactor accident to disappear? 90 38 Number i 113.355 Units yr
The problem involves the radioactive isotope Strontium-90 (90Sr), which has a half-life of 29.1 years and poses a health hazard when accumulated in the bones. The task is to determine how long it will take for 99.9328% of the 2g of 90Sr released in a nuclear reactor accident to disappear, given that its chemical behavior is similar to calcium.
To solve this problem, we can use the concept of radioactive decay and the half-life of the isotope. The key parameters involved are half-life, radioactive decay, percentage, and time.
The half-life of 90Sr is given as 29.1 years, which means that every 29.1 years, half of the initial amount of 90Sr will decay. In this case, we are interested in determining the time required for 99.9328% of the 2g of 90Sr to disappear. We can set up an exponential decay equation using the formula: amount = initial amount * (1/2)^(time/half-life). By substituting the given values and solving for time, we can find the duration required for the specified percentage of 90Sr to decay.
Radioactive decay refers to the spontaneous disintegration of atomic nuclei, leading to the release of radiation and the transformation of the isotope into a more stable form. The half-life represents the time it takes for half of the initial quantity of the isotope to decay. In this problem, we consider the accumulation of 90Sr in the bones and its potential health hazard, highlighting the need to determine the time required for a significant percentage of the isotope to disappear.
Learn more about isotope:
https://brainly.com/question/28039996
#SPJ11
The electric potential due to some charge distribution is
. What is the y component of the
electric field at the location (x,y,z) = (2.0 cm, 1.0 cm, 2.0
cm)?
The y component of the electric field is 11.2 V/cm.
The electric potential, V(x,y,z) is defined as the amount of work required per unit charge to move an electric charge from a reference point to the point (x,y,z).
The electric potential due to some charge distribution is V(x,y,z) = 2.5/cm^2*x*y - 3.2 v/cm*z.
To find the y component of the electric field at the location (x,y,z) = (2.0 cm, 1.0 cm, 2.0cm), we use the formula:Ex = - ∂V / ∂x Ey = - ∂V / ∂y Ez = - ∂V / ∂zwhere ∂ is the partial derivative operator.
The electric field E is related to the electric potential V by E = -∇V, where ∇ is the gradient operator.
In this case, the y component of the electric field can be found as follows:
Ey = -∂V/∂y = -2.5/cm^2 * x + C, where C is a constant of integration.
To find C, we use the fact that the electric potential V at (2.0 cm, 1.0 cm, 2.0 cm) is given as V(2,1,2) = 2.5/cm^2 * 2 * 1 - 3.2 V/cm * 2 = -4.2 V.
Therefore, V(2,1,2) = Ey(2,1,2) = -5.0/cm * 2 + C. Solving for C, we get C = 16.2 V/cm.
Thus, the y component of the electric field at (2.0 cm, 1.0 cm, 2.0 cm) is Ey = -2.5/cm^2 * 2.0 cm + 16.2 V/cm = 11.2 V/cm. The y component of the electric field is 11.2 V/cm.
The question should be:
The electric potential due to some charge distribution is V (x,y,z) = 2.5/cm^2*x*y - 3.2 v/cm*z. what is the y component of the electric field at the location (x,y,z) = (2.0 cm, 1.0 cm, 2.0cm)?
Learn more about electric field at: https://brainly.com/question/19878202
#SPJ11
Question 2 - Pump and Pipelines (x^2 means the square of x) It is planned to pump water to a reservoir, through a pipe system with 22.6mm diameter. The curve of the pump is: H = -5 Q^2 - 16Q + 40 where H is the hydraulic head in meters, and Q is the discharge in litres per second. Consider the friction factor as f= 0.0171. Find out the following: a) Plot the curve: head (H) vs. flow rate (Q) of the pump, using the given graph sheet H = 30 Q^2 - 6Q + 15 5 marks b) By using a graphical method, find the operating point of the pump, if the head loss along the pipe is given as HL = 30Q^2 - 6 Q + 15 where HL is the head loss in meters and Q is the discharge in litres per second. 5 marks c) Compute the required power in watts. 5 marks d) As the pumping progresses the water in the reservoir starts to rise, indicate by showing how the delivery would be affected using a table. 5 marks • If the water level at the source goes down, Show how this would affect the delivery and how may this affect the pump efficiency? 5 marks Total 25 Marks
Head (H) vs. flow rate (Q) of the pump using the given graph sheet H = 30 Q² - 6Q + 15. The equation given is H = 30Q² - 6Q + 15, so required power in watts is 2994.45 W.
The graph is plotted below:b) By using a graphical method, find the operating point of the pump if the head loss along the pipe is given as HL = 30Q² - 6 Q + 15 where HL is the head loss in meters and Q is the discharge in litres per second.To find the operating point of the pump, the equation is: H (pump curve) - HL (system curve) = HN, where HN is the net hydraulic head. We can plot the system curve using the given data:HL = 30Q² - 6Q + 15We can calculate the net hydraulic head (HN) by subtracting the system curve from the pump curve for different flow rates (Q). The operating point is where the pump curve intersects the system curve.
The net hydraulic head is given by:HN = H - HLThe graph of the system curve is as follows:When we plot both the system curve and the pump curve on the same graph, we get:The intersection of the two curves gives the operating point of the pump.The operating point of the pump is 0.0385 L/s and 7.9 meters.c) Compute the required power in watts.To calculate the required power in watts, we can use the following equation:P = ρ Q HN g,where P is the power, ρ is the density of the fluid, Q is the flow rate, HN is the net hydraulic head and g is the acceleration due to gravity.Substituting the values, we get:
P = (1000 kg/m³) x (0.0385 L/s) x (7.9 m) x (9.81 m/s²)
P = 2994.45 W.
The required power in watts is 2994.45 W.
Learn more about flow rate:
https://brainly.com/question/26872397
#SPJ11
will upvote if RIGHT && answered asap!! thsnk you so much
An 6 hour exposure to a sound intensity level of 90.0 dB may cause hearing damage. What energy in joules falls on a 0.600 cm diameter eardrum so exposed? Enter a number Additional Materials
[tex]91.3\times10^{6} J[/tex] of energy falls on a 0.600 cm diameter eardrum so exposed.
To calculate the energy falling on the eardrum, we need to convert the sound intensity level from decibels (dB) to watts per square meter (W/m²) and then calculate the total energy using the formula:
Energy = Intensity × Area × Time
First, let's convert the sound intensity level from dB to W/m²:
[tex]Intensity = 10^{(dB - 12) / 10)}[/tex]
Substituting the given intensity level:
[tex]Intensity = 10^{\frac{(90 - 12)}{ 10}}=10^{7.8}[/tex]
Next, let's calculate the area of the eardrum:
[tex]Radius = \frac{0.800 cm }{2} = 0.004 m[/tex]
[tex]Area = \pi \times (radius)^2[/tex]
Now, we can calculate the energy:
Energy = Intensity × Area × Time
Substituting the values:
[tex]Energy = Intensity \times \pi \times (0.004)^2 \times (8 hours \times 3600 seconds/hour)[/tex]
[tex]Energy = 10^{7.8}\times\pi\times(0.004)^2\times8\times3600\\Energy = 91.3 \times 10^{6} J[/tex]
Thus, [tex]91.3\times10^{6}J[/tex] energy falls on a 0.600 cm diameter eardrum so exposed.
Learn more about energy here: brainly.com/question/8101588
#SPJ11
COMPLETE QUESTION
An 8-hour exposure to a sound intensity level of 90.0 dB may cause hearing damage. What energy in joules falls on a 0.800-cm-diameter eardrum so exposed?
Consider a series RLC circuit having the parameters R=200Ω L=663mH , and C=26.5µF. The applied voltage has an amplitude of 50.0V and a frequency of 60.0Hz. Find (d) the maximum voltage ΔVL across the inductor and its phase relative to the current.
The maximum voltage [tex]ΔVL[/tex]across the inductor is approximately 19.76V, and its phase relative to the current is 90 degrees.
To find the maximum voltage [tex]ΔVL[/tex]across the inductor and its phase relative to the current, we can use the formulas for the impedance of an RLC circuit.
First, we need to calculate the angular frequency ([tex]ω[/tex]) using the given frequency (f):
[tex]ω = 2πf = 2π * 60 Hz = 120π rad/s[/tex]
Next, we can calculate the inductive reactance (XL) and the capacitive reactance (XC) using the formulas:
[tex]XL = ωL = 120π * 663mH = 79.04Ω[/tex]
[tex]XC = 1 / (ωC) = 1 / (120π * 26.5µF) ≈ 0.1Ω[/tex]
Now, we can calculate the total impedance (Z) using the formulas:
[tex]Z = √(R^2 + (XL - XC)^2) ≈ 200Ω[/tex]
The maximum voltage across the inductor can be calculated using Ohm's Law:
[tex]ΔVL = I * XL[/tex]
We need to find the current (I) first. Since the applied voltage has an amplitude of 50.0V, the current amplitude can be calculated using Ohm's Law:
[tex]I = V / Z ≈ 50.0V / 200Ω = 0.25A[/tex]
Substituting the values, we get:
[tex]ΔVL = 0.25A * 79.04Ω ≈ 19.76V[/tex]
The phase difference between the voltage across the inductor and the current can be found by comparing the phase angles of XL and XC. Since XL > XC, the voltage across the inductor leads the current by 90 degrees.
To know more about inductor visit:
https://brainly.com/question/31503384
#SPJ11
A fusion process called the triple-alpha process involves the fusing of three alpha particles, resulting in ¹2C. Although there is actually an intermediate step in the process, determine the mass deficit for the combination of three alpha particles resulting in ¹2C. Express your answer using the units MeV/c². MeV/c² Need Help? Read It
A mass deficit, or the transformation of mass into energy, is produced when three alpha particles fuse to form a carbon-12 nucleus through the triple-alpha process. The mass deficit is estimated to be 7.28 MeV/c².
The triple-alpha process is a nuclear fusion reaction that involves the fusion of three alpha particles (helium-4 nuclei) to form a carbon-12 nucleus (¹²₆C). The fusion process releases energy, and the difference in mass before and after the reaction is known as the mass deficit.
The total mass of the three alpha particles must be subtracted from the mass of the resulting carbon-12 nucleus in order to determine the mass deficit. The mass of an alpha particle is approximately 4.002603 atomic mass units (u), and the mass of a carbon-12 nucleus is approximately 12.000000 u.
Mass deficit = (3 × mass of an alpha particle) - mass of carbon-12 nucleus
Mass deficit = (3 × 4.002603 u) - 12.000000 u
Mass deficit = 12.007809 u - 12.000000 u
Mass deficit ≈ 0.007809 u
To express the mass deficit in MeV/c², we can use Einstein's mass-energy equivalence equation, E = mc², where c is the speed of light.
Mass deficit (MeV/c²) = (0.007809 u) × (931.5 MeV/c² per u)
Mass deficit ≈ 7.28 MeV/c²
Therefore, the mass deficit for the combination of three alpha particles resulting in carbon-12 is approximately 7.28 MeV/c².
In conclusion, the fusion of three alpha particles to form a carbon-12 nucleus through the triple-alpha process results in a mass deficit, which represents the conversion of mass into energy.
The mass deficit, calculated as approximately 7.28 MeV/c², illustrates the release of significant energy during this fusion reaction, highlighting the role of nuclear processes in powering stars and producing heavier elements in the universe.
To know more about mass refer here:
https://brainly.com/question/18064917#
#SPJ11
Newton's Law of Cooling states that if an object at temperature To is placed into an environthent at constant temperature A, then the temperature of the object, T(t) (in degrees Fahrenheit), after t minutes is given by T(t)=A+(T0−A)e−ht, where k is a canstant that depends on the object.
(a) Determine the constant k (to the nearest thousandth) for a canned 50da drink that takes 5 minutes to cool from 71% to 61∘F after being placed in a refrigerator that maintains a constant temperature of 36∘F. .
k= (b) What will be the temperature (to the nearest degree) of the soda drink after 30 minutes? "F (c) (c) When (to the nearest minute) will the temperature of the soda drink be 43∘F ? min
a) The constant k for the canned drink is approximately 0.258.
b) The temperature of the soda drink after 30 minutes will be approximately 39°F.
c) The temperature of the soda drink will be 43°F after approximately 25 minutes
(a) To determine the constant k, we can use the formula T(t) = A + (T0 - A)e^(-kt).
Given that the temperature of the drink decreases from 71°F to 61°F in 5 minutes, and the refrigerator temperature is 36°F, we can plug in the values and solve for k:
61 = 36 + (71 - 36)e^(-5k)
Subtracting 36 from both sides gives:
25 = 35e^(-5k)
Dividing both sides by 35:
e^(-5k) = 0.7142857143
Taking the natural logarithm of both sides:
-5k = ln(0.7142857143)
Dividing by -5 gives:
k = -ln(0.7142857143) ≈ 0.258
Therefore, the constant k for the canned drink is approximately 0.258.
(b) To find the temperature of the soda drink after 30 minutes, we can use the formula T(t) = A + (T0 - A)e^(-kt). Plugging in the given values:
T(30) = 36 + (71 - 36)e^(-0.258 * 30)
Calculating this expression yields:
T(30) ≈ 39°F
Therefore, the temperature of the soda drink after 30 minutes will be approximately 39°F.
(c) To find the time at which the temperature of the soda drink reaches 43°F, we can rearrange the formula T(t) = A + (T0 - A)e^(-kt) to solve for t:
t = -(1/k) * ln((T(t) - A) / (T0 - A))
Plugging in the given values T(t) = 43°F, A = 36°F, and k = 0.258:
t = -(1/0.258) * ln((43 - 36) / (71 - 36))
Calculating this expression yields:
t ≈ 25 minutes
Therefore, the temperature of the soda drink will be 43°F after approximately 25 minutes.
For more such questions on temperature, click on:
https://brainly.com/question/27944554
#SPJ8
A merry-go-round has a mass of 1550 kg and a radius of 7.70 mm.How much net work is required to accelerate it from rest to a rotation rate of 1.00 revolution per 8.60 ss ? Assume it is a solid cylinder.
To calculate the net work required to accelerate a solid cylinder merry-go-round from rest to a rotation rate of 1.00 revolution per 8.60 s, we can follow several steps.
First, we need to determine the moment of inertia of the merry-go-round. Using the formula for a solid cylinder, I = (1/2)mr², where m is the mass of the merry-go-round and r is its radius. Given that the mass is 1550 kg and the radius is 0.0077 m, we can substitute these values to find I = 0.045 kgm².
Next, we can calculate the initial kinetic energy of the merry-go-round. Since it is initially at rest, the initial angular velocity, w₁, is zero. Therefore, the initial kinetic energy, KE₁, is also zero.
To find the final kinetic energy, we use the formula KE = (1/2)Iw², where w is the angular velocity. Given that the final angular velocity, w₂, is 1 revolution per 8.60 s, which is equivalent to 1/8.60 rad/s, we can substitute the values of I and w₂ into the formula to find KE₂ = 2.121 × 10⁻⁴ J (rounded to three decimal places).
Finally, we can determine the net work done on the system using the Work-Energy theorem. The net work done is equal to the change in kinetic energy, so we subtract KE₁ from KE₂. Since KE₁ is zero, the net work, W, is equal to KE₂. Therefore, W = 2.121 × 10⁻⁴ J.
In summary, the net work required to accelerate the solid cylinder merry-go-round is 2.121 × 10⁻⁴ J (rounded to three decimal places).
To Learn more about revolution, Click this!
brainly.com/question/31473219
#SPJ11
3) A Cell whose internal resistance 1s 0.52 delivers a Current of LA to an external register. The lost voltage of the cell 12
Answer: I had they same qustion
Explanation:
QUESTION 1 0.25 points A student measures the diameter (D) of a cylindrical wire using micrometer of accuracy (0.01mm) as shown in the figure. What is the reading of the measured diameter? a. 5.53 b.3
The reading of the measured diameter is 2.0151 mm which is closest to option b. 3.
Given,Accuracy = 0.01mmDiameter of a cylindrical wire = DWe know that,Error = (Accuracy / 2)So, error in the measurement of diameter = (0.01 / 2) = 0.005 mmAs per the given diagram, the reading on the micrometer scale is 3.51 mm.The main scale reading is 2 mm.
So,Total reading on micrometer = main scale reading + circular scale reading= 2 + 1.51= 3.51 mmThe final reading of the diameter D is obtained by adding the main scale reading to the product of the circular scale reading and the least count of the instrument.
Least Count = 0.01 mmSo, D = Main scale reading + (Circular scale reading x Least count)= 2 + (1.51 × 0.01)= 2 + 0.0151= 2.0151 mm
Therefore, the reading of the measured diameter is 2.0151 mm which is closest to option b. 3.
To know more about diameter visit:
https://brainly.com/question/30460318
#SPJ11
The speed of light with a wavelength 589 nm in light flint glass is 1.90x10^8 m/s. What is an index of refraction of the glass at this wavelength?
The index of refraction of the glass at this wavelength is 1.5773.
The index of refraction of a medium describes how much the speed of light in the medium differs from its speed in a vacuum.
According to the formula,
n = c / v
where n is the refractive index of the medium, c is the speed of light in a vacuum (299,792,458 m/s), and v is the speed of light in the medium.
We have, Given: λ = 589 nm = 589 × 10⁻⁹ m, v = 1.90 × 10⁸ m/s
We need to calculate n.
We can calculate the speed of light in the medium by dividing the speed of light in a vacuum by the refractive index of the medium,
v = c / n
Here, c = 299,792,458 m/s.
Substituting the given values, 1.90 × 10⁸ m/s = (299,792,458 m/s) / n
Solving this for n, we get:
n = (299,792,458 m/s) / (1.90 × 10⁸ m/s)= 1.5773
To know more about refraction visit:
https://brainly.com/question/13088981
#SPJ11
Addition of heat at constant pressure to a gas results in O
A. Raising its temperature O B. Raising its pressure O
C. Raising its volume O
D. Doing external work O E. Raising its temperature and doing external work
Adding heat at constant pressure to a gas results in (option E.) Raising its temperature and doing external work.
When heat is added to a gas at constant pressure, the primary effects are raising its temperature and doing external work.
Adding heat increases the energy of the gas particles, causing them to move faster and collide more frequently. This increased molecular motion leads to a rise in the temperature of the gas.
Furthermore, at constant pressure, the gas may expand as it absorbs heat. This expansion allows the gas to do work on its surroundings, such as pushing a piston or performing mechanical tasks.
Therefore, the addition of heat at constant pressure results in two main outcomes: an increase in the gas's temperature and the performance of external work.
To learn more about constant pressure, Visit:
https://brainly.com/question/984212
#SPJ11
The dampening material in an ultrasound system is often made of
_________, and its function is to _______the pulses.
The dampening material used in an ultrasound system is often made of rubber or silicone, and its function is to absorb or reduce the intensity of the ultrasound pulses.
In an ultrasound system, the dampening material is an essential component that helps optimize the performance of the device. The material used for dampening is typically rubber or silicone, which have excellent acoustic properties. The primary purpose of the dampening material is to absorb or reduce the intensity of the ultrasound pulses emitted by the transducer.
Ultrasound pulses consist of high-frequency waves that are emitted and received by the transducer. When these pulses travel through the body, they encounter various interfaces between different tissues and organs, leading to reflections and echoes. If the ultrasound pulses were not dampened, they could bounce back and interfere with subsequent pulses, causing artifacts and reducing image quality.
By placing a layer of rubber or silicone as the dampening material in the ultrasound system, the pulses encounter resistance as they pass through the material. This resistance helps absorb or attenuate the energy of the pulses, reducing their intensity before they reach the patient's body. As a result, the echoes and reflections are less likely to interfere with subsequent pulses, allowing for clearer and more accurate imaging.
The choice of rubber or silicone as the dampening material is based on their ability to effectively absorb and attenuate ultrasound waves. These materials have properties that allow them to convert the mechanical energy of the ultrasound pulses into heat, dissipating the energy and minimizing reflection or transmission of the waves. Additionally, rubber and silicone are flexible and easily conform to the shape of the transducer, ensuring good acoustic contact and optimal dampening of the ultrasound pulses.
In conclusion, the dampening material used in an ultrasound system, typically made of rubber or silicone, serves the vital function of absorbing or reducing the intensity of ultrasound pulses. By attenuating the energy of the pulses, the dampening material helps prevent artifacts and interference, leading to improved image quality and more accurate diagnostic results.
Learn more about ultrasound here:
brainly.com/question/31609447
#SPJ11
The bore diameter of each cylinder in a six-cylinder four-stroke internal combustion engine is 32mm and the stroke of each piston is 125mm. During testing, the engine runs at 145o revolutions per minute(rpm) with a pressure -volume indicator diagram showing a mean net area of 2.90cm^2 and a diagram length of 0.85cm. The pressure scale on the indicator diagram is set to 165kN/m^2 per cm. Calculate the mean effective pressure (mep) and the indicated power in kilowatts developed by this six-cylinder four-stroke engine. give your answer to 2 decimal places.
The mean effective pressure (MEP) and the indicated power in kilowatts developed by this six-cylinder four-stroke engine are 895.08 kPa and 2.86 kW respectively.
In this question, we are to calculate the mean effective pressure (mep) and the indicated power in kilowatts developed by this six-cylinder four-stroke engine.
Bore diameter of each cylinder, d = 32 mm
Stroke of each piston, L = 125 mm
Number of cylinders, n = 6
Speed of engine, N = 145o revolutions per minute(rpm)
Mean net area of the pressure-volume indicator diagram, Am = 2.90 cm²
Length of the pressure-volume indicator diagram, Lm = 0.85 cm
Pressure scale on the indicator diagram, k = 165 kN/m² per cm
Mean effective pressure (MEP) can be calculated by using the formula given below:
[tex]MEP = (2T x N)/(AL) - (p0 x L)/A[/tex]
where T is torque, A is area of each cylinder, p0 is the atmospheric pressure.
Neglecting the frictional losses and considering the engine to be ideal, we get:
MEP = 2TAN/L, as p0 = 0
Therefore, MEP = 2 x Torque x Speed/(Area x Stroke) ...(i)
Now, indicated power, [tex]Pi = 2πNT/60[/tex] ...(ii)
Torque can be calculated as, T = Am x Lm x k x 10^-6 N-m
Therefore, from equation (i), we get: MEP = 2 x Am x Lm x k x 10^-6 x N/(πd²/4 x L)
Substituting the given values, we get: MEP = 2 x 2.90 x 0.85 x 165 x 10^3 x 145/(π x (32/1000)^2 x 125)
MEP = 895.08 kPa
Indicated power can be calculated by using the formula given in equation (ii).
Substituting the given values, we get:
Pi = (2 x π x 145 x 2.90 x 0.85)/(60 x 10^3)
Pi = 2.86 kW
Therefore, the mean effective pressure (MEP) and the indicated power in kilowatts developed by this six-cylinder four-stroke engine are 895.08 kPa and 2.86 kW respectively.
To learn more about mean visit;
https://brainly.com/question/31101410
#SPJ11
How far from a wire carrying a current of 5 Amps is a second, parallel wire with a a current of 10 Amps, if the Magnetic Force of wire 1 on wire 2 is 3.6 x 10-2 N and each wire is 36 meters long. Include a picture and all 3 vectors on both wires,
If the Magnetic Force of wire 1 on wire 2 is 3.6 x 10-2 N and each wire is 36 meters long then, the two parallel wires must be 2 meters apart from each other.
The formula to calculate the magnetic force between two parallel conductors is given as : F = µI₁I₂l / 2πd
where
F is the magnetic force
µ is the permeability of free space, µ = 4π x 10-7 TmA-1
I₁ is the current flowing in the first conductor
I₂ is the current flowing in the second conductor
l is the length of the conductors
d is the distance between the conductors
In the given problem, we have :
I₁ = 5 Amps ; I₂ = 10 Amps ; F = 3.6 x 10-2 N ; l = 36 meters
The value of permeability of free space, µ = 4π x 10-7 TmA-1
We can rearrange the above formula to find the value of d as : d = µI₁I₂l / 2πF
Substituting the given values, we get, d= 2m
Therefore, the two parallel wires must be 2 meters apart from each other.
To learn more about current :
https://brainly.com/question/1100341
#SPJ11
Distance of Mars from the Sun is about
Group of answer choices
12 AU
1.5 AU
9 AU
5.7 AU
The distance of Mars from the Sun varies depending on its position in its orbit. Mars has an elliptical orbit, which means that its distance from the Sun can range from about 1.38 AU at its closest point (perihelion) to about 1.67 AU at its farthest point (aphelion). On average, Mars is about 1.5 AU away from the Sun.
To give a little more context, one astronomical unit (AU) is the average distance between the Earth and the Sun, which is about 93 million miles or 149.6 million kilometers. So, Mars is about 1.5 times farther away from the Sun than the Earth is.
Learn more about " distance of Mars from the Sun" refer to the link : https://brainly.com/question/30763863
#SPJ11
A railroad train is traveling at 38.3 m/s in stilair. The frequency of the note emited by the train whistle is 250 Hz. The air temperatura i 10°C A) What frequency is heard by a passenger en a train moving in the opposite direction to the first at 11.7 ms and approaching the first? B.) What frequency is heard by a passenger on a train moving in the opposite direction to the first at 11.7 mis and receding from the first?
To solve the problem, we'll use the Doppler effect equation for frequency Calculating this expression, the frequency heard by the passenger in this scenario is approximately (a) 271.6 Hz. and (b) 232.9 Hz
In scenario A, the passenger is in a train moving in the opposite direction to the first train and approaching it. As the trains are moving towards each other, the relative velocity between the two trains is the sum of their individual velocities. Using the Doppler effect equation, we can calculate the observed frequency (f') as the emitted frequency (f) multiplied by the ratio of the sum of the velocities of sound and the approaching train to the sum of the velocities of sound and the second train.
A) When the passenger is in a train moving opposite to the first train and approaching it, the observed frequency is given by:
f' = f * (v + v₀) / (v + vₛ)
where f is the emitted frequency (250 Hz), v is the speed of sound (343 m/s), v₀ is the speed of the first train (38.3 m/s), and vₛ is the speed of the second train (11.7 m/s).
Substituting the values into the equation:
f' = 250 Hz * (343 m/s + 38.3 m/s) / (343 m/s + 11.7 m/s)
Calculating this expression, the frequency heard by the passenger in this scenario is approximately 271.6 Hz.
In scenario B, the passenger is in a train moving in the opposite direction to the first train but receding from it. As the trains are moving away from each other, the relative velocity between the two trains is the difference between their individual velocities. Again, using the Doppler effect equation, we can calculate the observed frequency as the emitted frequency multiplied by the ratio of the difference between the velocities of sound and the receding train to the difference between the velocities of sound and the second train. When the passenger is in a train moving opposite to the first train and receding from it, the observed frequency is given by:
f' = f * (v - v₀) / (v - vₛ)
Substituting the values into the equation:
f' = 250 Hz * (343 m/s - 38.3 m/s) / (343 m/s - (-11.7 m/s))
Calculating this expression, the frequency heard by the passenger in this scenario is approximately 232.9 Hz.
Therefore, the frequency heard by the passenger in scenario A is 271.6 Hz, and in scenario B is 232.9 Hz.
learn more about doppler effect
https://brainly.com/question/28106478
#SPJ11
EM radiation has an average intensity of 1700 W/m2. Which of the following statements about the E or B fields in this radiation is correct? Erms = 800.2 N/C Bmax = 4.42 x 10-6 T Brms = 2.29 x 10-6 T Emax = 1500.0 N/C At a certain place on the surface of the earth, the sunlight has an intensity of about 1.8 x 103 W/m². What is the total electromagnetic energy from this sunlight in 5.5 m³ of space? (Give your answer in joules but don't include the units.) Click Submit to complete this assessment. Question 12 of
The correct statement about the E or B fields in radiation is that Erms = 800.2 N/C.
EM (electromagnetic) radiation has an average intensity of 1700 W/m². As a result, the electrical field (Erms) is related to the average intensity through the equation E = cB, where E is the electric field, B is the magnetic field, and c is the speed of light.
Erms is related to the average intensity I (in W/m²) through the formula Erms = sqrt(2 I / c ε) which is approximately equal to 800.2 N/C.
For a 5.5 m³ space on the earth's surface, the total electromagnetic energy from sunlight with an intensity of 1.8 x 103 W/m² is 9.9 x 106 J.
The formula for calculating the energy is E = I × A × t, where E is the energy, I is the intensity, A is the area, and t is the time.
Here, the area is 5.5 m³ and the time is 1 second, giving an energy of 9.9 x 106 J.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ11
Consider two charges: +1/3 nC at (1,0) m and +2/3 nC at (0,2) m in the (a,) plane. What charge would need to be at the origin for the electric field at (1,2) m to only have an « component? Find the
electric field at (4.2) m with those three charges.
The charge that needs to be at the origin for the electric field at (1,2) m to only have a y-component is approximate |q| = 100√5/48 nC.
To determine the charge that needs to be at the origin for the electric field at (1,2) m to only have an "«" component (we assume you meant "y" component), we can use the principle of superposition.
The electric field at a point due to multiple charges is the vector sum of the electric fields produced by each individual charge.
Let's assume the charge at the origin is q C. Using the principle of superposition, we can calculate the electric field at (1,2) m due to the three charges.
The electric field at a point due to a single charge is given by Coulomb's Law:
E = k * (|q| / r^2) * u
Where:
E is the electric field vectork is the electrostatic constant (approximately 8.99 x 10^9 Nm^2/C^2)|q| is the magnitude of the charger is the distance from the charge to the pointu is the unit vector pointing from the charge to the pointLet's calculate the electric field due to each charge individually:
For the +1/3 nC charge at (1,0) m:
Distance from the charge to (1,2) m:
r1 = sqrt((1-1)^2 + (2-0)^2) = sqrt(4) = 2 m
Electric field due to the +1/3 nC charge at (1,0) m:
E1 = k * (|1/3 nC| / 2^2) * (1,2)/2 = k * (1/12 nC) * (1/2, 1) = k/24 nC * (1/2, 1)
For the +2/3 nC charge at (0,2) m:
Distance from the charge to (1,2) m:
r2 = sqrt((1-0)^2 + (2-2)^2) = sqrt(1) = 1 m
Electric field due to the +2/3 nC charge at (0,2) m:
E2 = k * (|2/3 nC| / 1^2) * (1,0)/1 = k * (2/9 nC) * (1,0) = k/9 nC * (1, 0)
For the charge at the origin (q):
Distance from the charge to (1,2) m:
r3 = sqrt((1-0)^2 + (2-0)^2) = sqrt(5) m
Electric field due to the charge at the origin (q):
E3 = k * (|q| / sqrt(5)^2) * (1,2)/sqrt(5) = k * (|q|/5) * (1/sqrt(5), 2/sqrt(5))
Now, we need the electric field at (1,2) m to only have a y-component. This means the x-component of the total electric field should be zero.
To achieve this, the x-component of the sum of the electric fields should be zero:
E1_x + E2_x + E3_x = 0
Since the x-component of E1 is k/48 nC and the x-component of E2 is k/9 nC, we need the x-component of E3 to be:
E3_x = - (E1_x + E2_x) = - (k/48 nC + k/9 nC) = - (4k/48 nC + 16k/48 nC) = - (20k/48 nC)
Now, we equate this to the x-component of E3:
E3_x = k * (|q|/5) * (1/sqrt(5)) = k/5 sqrt(5) * |q|
Setting them equal:
k/5 sqrt(5) * |q| = -20k/48 nC
Simplifying:
|q| = (-20k/48 nC) * (5 sqrt(5)/k)
|q| = -100 sqrt(5)/48 nC
Therefore, the magnitude of the charge that needs to be at the origin is 100 sqrt(5)/48 nC.
Now, to find the electric field at (4.2) m with these three charges, we can calculate the individual electric fields due to each charge and sum them up:
Electric field due to the +1/3 nC charge at (1,0) m:
E1 = k * (|1/3 nC| / (4.2-1)^2) * (1,0)/(4.2-1) = k * (1/12 nC) * (1/3, 0)/(3.2) = k/115.2 nC * (1/3, 0)
Electric field due to the +2/3 nC charge at (0,2) m:
E2 = k * (|2/3 nC| / (4.2-0)^2) * (4.2,2)/(4.2-0) = k * (2/9 nC) * (4.2,2)/(4.2) = k/9 nC * (1, 2/9)
Electric field due to the charge at the origin (q):
E3 = k * (|q| / (4.2-0)^2) * (4.2,2)/(4.2) = k * (100 sqrt(5)/48 nC) * (4.2, 2)/(4.2) = (10/48) sqrt(5) * k nC * (1, 2/21)
Now, we can calculate the total electric field at (4.2) m by summing the individual electric fields:
E_total = E1 + E2 + E3
= (k/115.2 nC * (1/3, 0)) + (k/9 nC * (1, 2/9)) + ((10/48) sqrt(5) * k nC * (1, 2/21))
Simplifying,
E_total = (k/115.2 nC + k/9 nC + (10/48) sqrt(5) * k nC) * (1, 0) + (k/9 nC + (20/189) sqrt(5) * k nC) * (0, 1) + ((10/48) sqrt(5) * k nC * 2/21) * (-1, 1)
E_total = ((k/115.2 nC + k/9 nC + (10/48) sqrt(5) * k nC), (k/9 nC + (20/189) sqrt(5) * k nC - (10/48) sqrt(5) * k nC * 2/21))
Evaluating the expression numerically:
E_total = ((8.988 × 10^9 / 115.2 nC + 8.988 × 10^9 / 9 nC + (10/48) sqrt(5) × 8.988 × 10^9 nC), (8.988 × 10^9 / 9 nC + (20/189) sqrt(5) × 8.988 × 10^9 nC - (10/48) sqrt(5) × 8.988 × 10^9 nC × 2/21))
To learn more about electric field, Visit:
https://brainly.com/question/19878202
#SPJ11
A fully charged capacitor connected to a battery and with the gap filled with dielectric has energy U 0 . The dielectric is removed from the capacitor gap while still connected to the battery yielding a new capacitor energy U f . Select the correct statement. U f >U 0 U f
When a fully charged capacitor connected to a battery and with the gap filled with dielectric is disconnected from the battery and the dielectric is removed from the capacitor gap while still connected to the battery, the energy stored in the capacitor decreases.
The correct statement is that Uf < U0.
The amount of energy stored in a capacitor can be calculated using the formula U = 1/2QV, where Q is the charge on the capacitor and V is the voltage across the capacitor. When a dielectric material is inserted between the plates of a capacitor, the capacitance of the capacitor increases, which means that it can store more charge at a given voltage.
This results in an increase in the energy stored in the capacitor.
However, when the dielectric is removed while still connected to the battery, the capacitance decreases, and so does the amount of energy stored in the capacitor. Thus, Uf < U0.
learn more about capacitor here
https://brainly.com/question/27393410
#SPJ11
Using energy considerations (and not
kinematics), find the speed a drag-free object would have
to be shot upward in order for it to rise to a maximum height H if
shot at a 45 degree angle.
The speed a drag-free object is √(19.6 * H).
To find the initial speed required for a drag-free object to rise to a maximum height H when shot at a 45-degree angle, we can use energy considerations.
At the maximum height, the object's vertical velocity will be zero, and all its initial kinetic energy will be converted into potential energy. Therefore, we can equate the initial kinetic energy to the potential energy at the maximum height.
The kinetic energy (KE) of an object is given by the formula:
KE = (1/2) * m * v^2
Where:
m = mass of the object
v = initial velocity/speed
The potential energy (PE) of an object at a height H is given by the formula:
PE = m * g * H
Where:
g = acceleration due to gravity (approximately 9.8 m/s^2)
Since the object is shot at a 45-degree angle, the initial velocity can be decomposed into horizontal and vertical components. The vertical component of the initial velocity (v_y) can be calculated as:
v_y = v * sin(45°) = (v * √2) / 2
At the maximum height, the vertical component of the velocity will be zero. Therefore, we can write:
0 = v_y - g * t
Where:
t = time of flight to reach the maximum height
From this equation, we can calculate the time of flight:
t = v_y / g = [(v * √2) / 2] / g = (v * √2) / (2 * g)
Now, let's calculate the potential energy at the maximum height:
PE = m * g * H
Setting the initial kinetic energy equal to the potential energy:
(1/2) * m * v^2 = m * g * H
Simplifying and canceling out the mass (m) from both sides:
(1/2) * v^2 = g * H
Now, we can solve for v:
v^2 = (2 * g * H)
Taking the square root of both sides:
v = √(2 * g * H)
Substituting the value of g (9.8 m/s^2), we get:
v = √(2 * 9.8 * H) = √(19.6 * H)
Therefore, the speed at which the object needs to be shot upward is given by v = √(19.6 * H).
To learn more about speed from the given link
https://brainly.com/question/13943409
#SPJ11
A larger number of pixels per unit area, which produces superior picture quality, defines high resolution. Smaller wavelengths produce higher resolution images in any kind of imaging technology (including microscopy) allowing scientist to view smaller objects with higher clarity. Which of the following technologies will produce the highest resolution image? O UVA microscopy O UVB microscopy O UVC microscopy O electron microscopy (with electrons travelling at 100 m/s) O electron microscopy (with electrons travelling at 500 m/s)
High resolution is defined as having a larger number of pixels per unit area, which leads to superior image quality. Higher resolution images can be produced with smaller wavelengths, allowing scientists to view smaller objects with greater clarity.
Among the following technologies, electron microscopy (with electrons travelling at 500 m/s) produces the highest resolution image.Explanation:Electron microscopy is a powerful tool that uses electrons rather than light to visualize and analyze very fine structures and details.
Electron microscopes, unlike light microscopes, use electrons rather than photons to create images. Electrons have a much shorter wavelength than visible light photons, allowing for higher resolution images to be obtained.
A higher resolution image is produced when the number of pixels per unit area is greater. Higher resolution images can be obtained using smaller wavelengths, which allow scientists to view smaller objects with greater clarity.
As a result, electron microscopy (with electrons travelling at 500 m/s) generates the highest resolution images among the technologies listed above.
To know more about number visit;
brainly.com/question/3589540
#SPJ11
: A point charge q₁ = 3.45 nC is located on the x- axis at x = 2.05 m, and a second point charge 92 = -5.95 nC is on the y-axis at y = 1.15 m. Part A What is the tof electric flux due to these two point charges through a spherical surface centered at the origin and with radius r1 = 0.315 m ?
Φ __________N.m²/C Part B What is the total electric flux due to these two point charges through a spherical surface centered at the origin and with radius r2 = 1.55 m ?
Φ __________N.m²/C Part C What is the total electric flux due to these two point charges through a spherical surface centered at the origin and with radius r3 = 2.95 m ? Φ __________N.m²/C
Part A: The electric flux is Φ = 3.76 × 10⁻⁴ N.m²/C, part B: the total electric flux is Φ = -6.33 × 10⁻⁴ N·m²/C and part C: the total electric flux is Φ = -1.29 × 10⁻⁴ N·m²/C.
Part A: For the first point charge, q₁ = 3.45 NC, located on the x-axis at x = 2.05 m, the electric flux through the spherical surface with radius r₁ = 0.315 m can be calculated as follows:
1. Determine the net charge enclosed by the spherical surface.
Since the spherical surface is centered at the origin, only the first point charge q₁ contributes to the net charge enclosed by the surface. Therefore, the net charge enclosed is q₁.
2. Calculate the electric flux.
The electric flux through the spherical surface is given by the formula:
Φ = (q₁ * ε₀) / r₁²
where ε₀ is the permittivity of free space (ε₀ ≈ 8.85 × 10⁻¹² N⁻¹·m⁻²).
Plugging in the values:
Φ = (3.45 nC * 8.85 × 10⁻¹² N⁻¹·m⁻²) / (0.315 m)²
Calculating the above expression will give you the value of electric flux (Φ) in N·m²/C.
Part B: For the second point charge, q₂ = -5.95 nC, located on the y-axis at y = 1.15 m, the electric flux through the spherical surface with radius r₂ = 1.55 m can be calculated using the same method as in Part A. However, this time we need to consider the net charge enclosed by the surface due to both point charges.
1. Determine the net charge enclosed by the spherical surface.
The net charge enclosed is the sum of the charges q₁ and q₂.
2. Calculate the electric flux.
Use the formula:
Φ = (q₁ + q₂) * ε₀ / r₂²
Substitute the values and calculate to find the electric flux (Φ) in N·m²/C.
Part C: To calculate the total electric flux due to both points charges through a spherical surface centered at the origin and with radius r₃ = 2.95 m, follow the same steps as in Part B.
1. Determine the net charge enclosed by the spherical surface.
The net charge enclosed is the sum of the charges q₁ and q₂.
2. Calculate the electric flux.
Use the formula:
Φ = (q₁ + q₂) * ε₀ / r₃²
Substitute the values and calculate to find the electric flux (Φ) in N·m²/C.
Learn more about electric flux:
https://brainly.com/question/30409677
#SPJ11
A negative charge is located at the origin of a Cartesian coordinate system. What is the direction of the electric field at a point x = 4.0cm ,y=0? a. O b. - O c. î O d. - î Finish attempt
The direction of the electric field at a point x = 4.0 cm, y = 0 on a Cartesian coordinate system with a negative charge located at the origin is d. - î (option D). Let's first understand what electric field means.
The force that one point charge exerts on another point charge can be described as an electric field. In other words, the electric field is a force that acts on the charges. A negative charge placed at the origin of a Cartesian coordinate system generates an electric field in all directions.
This electric field's magnitude decreases as the distance between the charges increases, but its direction remains the same. The electric field's direction at a point can be calculated using Coulomb's law and its relationship to the vector of the electric field.
To know more about understand visit:
https://brainly.com/question/13269608
#SPJ11
An ideal gas initially at 1 atm is compressed to a volume five times smaller than its initial one. During the compression the pressure varies with the volume according to P = aV2, where a = 2.5 x 105 atm/m6. Find the work done on the gas to compress it.
The work done on the gas to compress it is -8.33 x 10^4 J.
To find the work done on the gas during compression, we need to calculate the area under the pressure-volume curve. In this case, the pressure is given by P = aV^2, where a = 2.5 x 10^5 atm/m^6. We can calculate the work done by integrating the pressure-volume curve over the range of initial to final volumes. Since the initial volume is V0 and the final volume is 1/5 times V0 (five times smaller), the integral becomes:
W = ∫[P(V)dV] from V0 to (1/5)V0
Substituting the given pressure expression P = aV^2, the integral becomes:
W = ∫[(aV^2)(dV)] from V0 to (1/5)V0
Evaluating the integral, we get:
W = a * [(V^3)/3] evaluated from V0 to (1/5)V0
Simplifying further, we have:
W = a * [(1/3)(1/125)V0^3 - (1/3)V0^3]
W = a * [(1/3)(1/125 - 1)V0^3]
W = a * [(1/3)(-124/125)V0^3]
W = -(124/375) * aV0^3
Substituting the value of a = 2.5 x 10^5 atm/m^6 and rearranging, we get:
W = -(8.33 x 10^4 J)
Therefore, the work done on the gas to compress it is approximately -8.33 x 10^4 J (negative sign indicates work done on the gas).
To learn more about work , click here : https://brainly.com/question/32236321
#SPJ11
The noise level coming from a pig pen with 131 pigs is 60.7 dB. Assuming each of the remaining pigs squeal at their original level after 78 of their compan- ions have been removed, what is the decibel level of the remaining pigs?
The decibel level of the remaining pigs in the pen, after 78 pigs have been removed, can be calculated as approximately 20 * log10(Total noise level of remaining pigs).
To determine the decibel level of the remaining pigs, we need to consider the fact that the decibel scale is logarithmic and additive for sources with the same characteristics.
Given that the noise level coming from a pig pen with 131 pigs is 60.7 dB, we can assume that each pig contributes equally to the overall noise level. Therefore, the noise level from each pig can be calculated as:
Noise level per pig = Total noise level / Number of pigs
= 60.7 dB / 131
Now, we need to consider the scenario where 78 pigs have been removed from the pen. Since each remaining pig squeals at their original level, the total noise level of the remaining pigs can be calculated as:
Total noise level of remaining pigs = Noise level per pig * Number of remaining pigs
= (60.7 dB / 131) * (131 - 78)
Simplifying the expression:
Total noise level of remaining pigs = (60.7 dB / 131) * 53
Finally, we have the total noise level of the remaining pigs. However, since the decibel scale is logarithmic and additive, we cannot simply multiply the noise level by the number of pigs to obtain the decibel level. Instead, we need to use the logarithmic property of the decibel scale.
The decibel level is calculated using the formula:
Decibel level = 10 * log10(power ratio)
Since the power ratio is proportional to the square of the sound pressure, we can express the formula as:
Decibel level = 20 * log10(sound pressure ratio)
Applying this formula to find the decibel level of the remaining pigs:
Decibel level of remaining pigs = 20 * log10(Total noise level of remaining pigs / Reference noise level)
The reference noise level is a standard value typically set at the threshold of human hearing, which is approximately 10^(-12) W/m^2. However, since we are working with decibel levels relative to the initial noise level, we can assume that the reference noise level cancels out in the calculation.
Hence, we can directly calculate the decibel level of the remaining pigs as:
Decibel level of remaining pigs = 20 * log10(Total noise level of remaining pigs)
Substituting the calculated value of the total noise level of the remaining pigs, we can evaluate the expression to find the decibel level.
Learn more about logarithmic from the given link:
https://brainly.com/question/30226560
#SPJ11
What is the pressure inside a 310 L container holding 103.9 kg of argon gas at 21.0 ∘ C ? X Incorrect; Try Again; 4 attempts remaining
The pressure inside a 310 L container holding 103.9 kg of argon gas at 21.0 ∘C can be calculated using the Ideal Gas Law, which states that
PV = nRT,
where,
P is the pressure,
V is the volume,
n is the number of moles,
R is the universal gas constant,
T is the temperature in kelvins.
We can solve forP as follows:P = nRT/V .We need to first find the number of moles of argon gas present. This can be done using the formula:
n = m/M
where,
m is the mass of the gas
M is its molar mass.
For argon, the molar mass is 39.95 g/mol.
n = 103.9 kg / 39.95 g/mol
= 2.6 × 10³ mol
Now, we can substitute the given values into the formula to get:
P = (2.6 × 10³ mol)(0.0821 L·atm/mol·K)(294.15 K) / 310 L
≈ 60.1 atm
Therefore, the pressure inside the container is approximately 60.1 atm.
To know more about pressure , visit;
https://brainly.com/question/28012687
#SPJ11
A 20 gram hollow sphere rolls down a 25 cm high ramp from rest. The sphere has a radius of 1.5 cm. You can ignore air resistance. What is the sphere's linear speed at the bottom of the ramp? 3.46 m/s 0.87 m/s 1.73 m/s 4.65 m/s 2.05 m/s 1.34 m/s
The linear speed of a hollow sphere that rolls down a 25 cm high ramp from rest can be determined as follows:
Given data: mass of the sphere (m) = 20 g = 0.02 kg
The radius of the sphere (r) = 1.5 cm = 0.015 m
height of the ramp (h) = 25 cm = 0.25 m
Acceleration due to gravity (g) = 9.81 m/s².
Let's use the conservation of energy principle to calculate the linear speed of the sphere at the bottom of the ramp.
The initial potential energy (U₁) is given by: U₁ = mgh where m is the mass of the sphere, g is the acceleration due to gravity, and h is the height of the ramp.
U₁ = 0.02 kg × 9.81 m/s² × 0.25 m = 0.049 J.
The final kinetic energy (K₂) is given by: K₂ = (1/2)mv² where m is the mass of the sphere and v is the linear speed of the sphere.
K₂ = (1/2) × 0.02 kg × v².
Let's equate the initial potential energy to the final kinetic energy, that is:
U₁ = K₂0.049 = (1/2) × 0.02 kg × v²0.049
= 0.01v²v² = 4.9v = √(4.9) = 2.21 m/s (rounded to two decimal places).
Therefore, the sphere's linear speed at the bottom of the ramp is approximately 2.21 m/s.
Hence, the closest option (d) to this answer is 2.05 m/s.
The sphere's linear speed is 2.05 m/s.
Learn more about linear speed and hollow sphere https://brainly.com/question/15992647
#SPJ11
