YALLL I NEED HELP ASAP... THIS DUE AT 11:59 AND ITS 10.42 RIGHT NOW

Given parameters:

Initial velocity of Coin = 0m/s

Time taken before coin hits ground  = 5.7s

Unknown:

Final velocity of the coin  = ?

Velocity is displacement with time. To solve this problem, we have to apply one of the equations of motion.

The fitting one of them here is shown below;

             V = U + gt

where;

V is the final velocity

U is the initial velocity

g is the acceleration due to gravity

t is the time taken

Here we use positive value of acceleration due to gravity because the coin is falling with the effect of acceleration and not against it.

Now input the parameters and solve;

               V  = 0 + 9.81 x 5.7

               V = 55.917m/s

Therefore, the final velocity is 55.917m/s.

The average acceleration of the NASCAR race car is 0 m/s². The formula for average acceleration is change in velocity/time taken to change the velocity.

Given data, the velocity of the NASCAR race car, v = 82 m/s

The average acceleration of the NASCAR race car can be determined using the below formula,

average acceleration=change in velocity/time taken to change the velocity

As the NASCAR race car is moving at a constant velocity, the velocity of the NASCAR race car does not change.

Thus the change in velocity, ∆v = 0.

So, the acceleration of the NASCAR race car is 0.

Hence the average acceleration of the car is 0 m/s².So, the average acceleration of the NASCAR race car is 0 m/s².

To know more about average acceleration, refer

https://brainly.com/question/104491

#SPJ11

Physical geography and climate have a significant impact on population distribution. Areas with fertile soil, mild climates, and access to water tend to have higher population densities than areas with poor soil, extreme climates, or limited access to water.

Fertile soil is essential for agriculture, which is the primary source of food for most people. Mild climates are more comfortable to live in than extreme climates, and they are also less likely to be affected by natural disasters. Access to water is essential for drinking, sanitation, and irrigation.

For example, the Nile River Valley in Egypt is one of the most densely populated areas in the world. The valley has fertile soil, a mild climate, and access to the Nile River, which provides water for irrigation and drinking.

In contrast, the Sahara Desert is one of the most sparsely populated areas in the world. The desert has poor soil, extreme temperatures, and limited access to water.

Other factors that influence population distribution include:

Economic opportunities: People are more likely to live in areas where there are good economic opportunities.

Political stability: People are more likely to live in areas where there is political stability.

History: The historical development of a region can also influence its population distribution.

In conclusion, physical geography and climate are two of the most important factors that influence population distribution. However, there are other factors that also play a role, such as economic opportunities, political stability, and history.

To learn more about population distribution click here: brainly.com/question/31646256

#SPJ11

Answer:

Yes, the velocity of the object can reverse direction when its acceleration is constant. For example consider that the velocity of any object at any time t is given as: ... At At t = 0 sec, the magnitude of velocity is 2m/s and is moving in the forward direction i.e.v (t) = -2.

Answer:The equa

Explanation:

Option B is the answer. The automobile travels a distance of 243.25 feet in the 9 seconds.

To calculate the distance traveled by the automobile, we need to use the formula for distance traveled during constant acceleration:

[tex]Distance = (Initial velocity * Time) + (0.5 * Acceleration * Time^{2} )[/tex]

Given that the automobile starts from rest (initial velocity = 0 mph) and accelerates at a rate of 1+3 mph/sec for 9 seconds, we can substitute these values into the formula:

[tex]Distance = (0 mph * 9 sec) + (0.5 * 1+3 mph/sec * (9 sec)^2)[/tex]

Simplifying the equation, we get:

[tex]Distance = 0 + 0.5 * (1+3) mph/sec * 81 sec^2 \\ = 0.5 * 4 mph/sec * 81 sec^2 \\ = 2 mph/sec * 81 sec^2[/tex]

Converting the units, 2 mph/sec is equal to 2 * 1.46667 ft/sec (since 1 mph is approximately equal to 1.46667 ft/sec). Therefore:

[tex]Distance = 2 * 1.46667 ft/sec * 81 sec^2\\ =240.884 ft[/tex]

Rounding to two decimal places, the distance traveled by the automobile in 9 seconds is approximately 243.25 feet. Therefore, the correct answer is B) 243.25.

Learn more about distance here:

https://brainly.com/question/12626613

#SPJ11

GMm/r = mv². This is the same as the centripetal force equation, which we know to be true since the orbit is circular.

The mass of the earth is M, the gravitational constant is G, and the orbital radius is r. The mass of the satellite is m and its velocity is v. We assume that the orbit is a perfect circle and that the only force acting on the satellite is the gravitational force between the satellite and the earth. We will determine the value of the radius of the orbit (r) in terms of known constants M, m, G and v.

Solve the equation on the far right for v. Then substitute this expression for "v" into the first set of equations. Now solve for "r," the radius of the discrete orbit.

Since the orbit is a perfect circle, the centripetal force is given by F = mv²/r. The gravitational force between the satellite and the earth is given by F = GMm/r². Since these are equal, we can equate these two and get

mv²/r = GMm/r²

Multiplying both sides by r², we get

v²r = GMm

Dividing both sides by v², we get

r = GM/v²

Substituting this value of r in the second equation, we get

F = mv²/GM × v²

Substituting this value of v² from the above equation, we get

F = mGM/r²

Therefore, r = √(GM/F)

Given information:

The mass of the earth is M, the gravitational constant is G, and the orbital radius is r. The mass of the satellite is m and its velocity is v. We assume that the orbit is a perfect circle and that the only force acting on the satellite is the gravitational force between the satellite and the earth. We will determine the value of the radius of the orbit (r) in terms of known constants M, m, G and v.

Therefore, the expression for v is

v = √(GM/r)

Substituting this value of v in the first set of equations, we get

GM/r² = v²/r

GM = v²r

Multiplying both sides by r, we get

GMm/r = mv².

Learn more about The mass of the earth: https://brainly.com/question/30501849

#SPJ11

The total pressure applied is  1,822,850 Pa. To determine the largest mass vehicle a hydraulic lift can lift, we need to consider the pressure and the area of the output line.

The formula to calculate the force exerted by a hydraulic system is:

Force = Pressure × Area

In this case, the pressure is given as 18 atm, and we need to convert it to pascals (Pa) for consistency in units. Since 1 atm is equivalent to 101,325 Pa, the pressure becomes:

Pressure = 18 atm × 101,325 Pa/atm = 1,822,850 Pa

The area of the output line can be calculated using the formula for the area of a circle:

Area = π × [tex](radius)^2[/tex]

Given that the diameter of the output line is 22 cm, we can calculate the radius:

Radius = diameter / 2 = 22 cm / 2 = 11 cm = 0.11 m

Now we can calculate the area:

Area = π × [tex](0.11 m)^2[/tex]

Once we have the pressure and the area, we can calculate the maximum force that the hydraulic lift can exert:

Force = Pressure × Area

Next, we need to determine the largest mass vehicle that can be lifted. This will depend on the force required to lift the vehicle, which is equal to the weight of the vehicle. The weight can be calculated using the formula:

Weight = mass × gravitational acceleration

The gravitational acceleration can be assumed to be approximately 9.8 [tex]m/s^2.[/tex]

Finally, we can calculate the mass of the largest vehicle that the hydraulic lift can lift by rearranging the formula for weight:

mass = Weight / gravitational acceleration

Substituting the calculated force for weight in the above equation, we can determine the largest mass vehicle that the hydraulic lift can lift.

Learn more about pressure here:

https://brainly.com/question/857286

#SPJ11

Answer: The answer is B, Globular Cluster.

Explanation: Why did you delete my answer?? Anyways...

A Globular cluster has hundreds of thousands to millions of stars. Since a Globular Cluster is found to be the cluster with the most stars in it, therefore, the globular cluster is the answer.

The Globular cluster type of star system has the most stars.

It is a system that collection of all the planets and spatial bodies revolving around the sun because of the gravitational pull of the sun.

Our Solar System is based on a heliocentric model in which the Sun is assumed to reside at the central point of the planetary system.

In other words, the Sun is at the center while the Earth and other planetary bodies revolve around it.

The star system that has the most stars is known as a globular cluster.

Learn more about Solar System

https://brainly.com/question/12075871

#SPJ5

Answer:

A

Explanation:

Constant speed (without change in direction) is not accelerating. If you are slowing down, speeding up, or changing direction, you are accelerating

Two mechanisms of primary migration are compaction-driven migration and buoyancy-driven migration.Pressure is the main driving force for secondary migration.

Capillary pressure is the main resisting force for secondary migration.The correct order of increasing thermal maturation for the byproducts of Kerogen is Methane/Dry Gas, Wet Gas, Gasoline, and Graphite.

1) Primary migration refers to the movement of hydrocarbons from the source rock to a reservoir. Two mechanisms of primary migration are compaction-driven migration, where the pressure generated by the compaction of sediment forces hydrocarbons to move, and buoyancy-driven migration, where lighter hydrocarbons move upward due to their buoyancy.

2) Secondary migration is the movement of hydrocarbons within a reservoir rock. The main driving force for secondary migration is pressure. Pressure differentials within the reservoir, caused by variations in fluid and rock properties, drive the movement of hydrocarbons from areas of high pressure to areas of lower pressure.

3) The main resisting force for secondary migration is capillary pressure. Capillary pressure arises from the surface tension between the hydrocarbons and the rock matrix. It acts against the movement of hydrocarbons and can restrict their flow within the reservoir.

4) The byproducts of Kerogen, the organic matter in sedimentary rocks that can generate hydrocarbons, undergo changes in composition and properties with increasing thermal maturation. In the order of increasing thermal maturation, the byproducts are Methane/Dry Gas (gaseous hydrocarbons), Wet Gas (a mixture of gaseous and liquid hydrocarbons), Gasoline (liquid hydrocarbons), and Graphite (a solid form of carbon). As the thermal maturation progresses, the hydrocarbons transform from lighter, gaseous forms to heavier, liquid or solid forms.

To learn more about Pressure, click here:
brainly.com/question/28012687
#SPJ11

The location of the center of gravity is the same for both Bob and Bill, but other factors such as flexibility and muscle strength may contribute to differences in their ability to lean over farther. The center of gravity of an object is the point where the weight of the object can be considered to act. It is the average position of all the individual particles that make up the object.

The center of gravity plays a crucial role in determining the stability and balance of an object. In the scenario described, both Bob and Bill have the same weight and wear identical shoes. This means that their individual masses and distributions of mass are the same. Since the location of the center of gravity depends on the distribution of mass, it would be in the same position for both individuals.

Therefore, option (e) "Bob and Bill must have a center of gravity that is the same location" is the correct answer. The center of gravity is not influenced by an individual's ability to lean over farther or their calf muscle strength.

The ability to lean over farther is determined by other factors such as flexibility, balance, and muscle strength. It is possible that Bob's superior ability to lean over farther could be due to factors like greater flexibility or stronger core muscles, which help him maintain balance and control during the leaning motion. However, these factors are separate from the location of the center of gravity.

In conclusion, the location of the center of gravity is the same for both Bob and Bill, but other factors such as flexibility and muscle strength may contribute to differences in their ability to lean over farther.

Learn more about gravity here:

https://brainly.com/question/31321801

#SPJ11

The distance of the star to Earth is 5.0 pc.

The formula to calculate the distance (D) in parsecs (pc) from the parallax angle (p) in arc-seconds is given by:

D = 1 / p

In this case, the star shows a parallax of 0.200 arc-seconds. Plugging this value into the formula, we get:

D = 1 / 0.200

D = 5.0 pc

Therefore, the distance of the star to Earth is 5.0 parsecs.

Learn more about parallax here:

https://brainly.com/question/29210252

#SPJ11

To maximize the objective function p with the given constraints, we use linear programming by identifying the feasible region.

Finding corner points, evaluating p at each point, and selecting the point with the maximum value of p.In this case, the given constraints are x = 0, y = 0, 2x + 2y = 4, and x + y = 8. To maximize the objective function p, we follow these steps:Identify the feasible region by graphing the constraints on a coordinate plane.

The corner points, which represent the vertices of the feasible region.Evaluate the objective function p at each corner point.Select the point with the maximum value of p as the optimal solution that maximizes p while satisfying the given constraints.

To learn more about  constraints.

Click here:brainly.com/question/30655935

#SPJ11

The magnitude of the acceleration experienced by the test tube is 2 × 10^6 m/s^2. Note that the negative sign indicates that the acceleration is directed opposite to the initial motion (upward).

To calculate the magnitude of the acceleration experienced by the test tube, we can use the kinematic equation:

v^2 = u^2 + 2as

Where:

v is the final velocity (0 m/s since it stops)

u is the initial velocity (calculated using the formula v = u + at, where v = 0 m/s, u is unknown, a is acceleration, and t is time)

a is the acceleration

s is the distance traveled (1.0 m)

We can solve for the initial velocity (u) using the equation:

v = u + at

0 = u + at

u = -at

Now we can substitute this expression for u into the first kinematic equation:

v^2 = (-at)^2 + 2as

0 = a^2t^2 + 2as

a^2t^2 = -2as

a = -2s/t^2

Now let's substitute the given values:

s = 1.0 m

t = 1.0 ms = 1.0 × 10^-3 s

a = -2(1.0 m) / (1.0 × 10^-3 s)^2

a = -2 × 10^6 m/s^2

To know more about final velocity

https://brainly.com/question/28608160

#SPJ11

Given that two cyclists, 39 mi apart, start riding towards each other at the same time. One cycle twice as fast as the other. If they meet 1 hr later, we need to find the average speed of each cyclist.

Then the speed of the faster cyclist will be 2x miles per hour. The total distance travelled by both cyclists = 39 miles. The two cyclists are moving towards each other, hence their relative speed = sum of their speeds = x + 2x = 3x miles per hour.

The total distance travelled by both cyclists will be equal to their relative speed = 3x miles per hour. So, 3x = 39 => x = 13 miles per hour. The speed of the slower cyclist = x = 13 miles per hour. The speed of the faster cyclist = 2x = 2 × 13 = 26 miles per hour.

To know more about speed visit:

https://brainly.com/question/17661499

#SPJ11

The magnitude of the normal reaction force from the floor on the stick is approximately 4.565 N.

Length of the stick (L) = 20 cm = 0.20 m

Distance from the upper end to the rope (d) = 7.0 cm = 0.07 m

Mass of the stick (m) = 0.400 kg

Gravitational acceleration (g) = 9.8 m/s²

The force applied by the stick on the floor is equal in magnitude but opposite in direction to the normal reaction force. So, to find the magnitude of the normal reaction force, we need to find the force applied by the stick on the floor.

The force applied horizontally by the stick is equal to the horizontal component of tension:

Force = Tension × cos(θ)

To find θ, use the right triangle formed by the stick and the floor. The opposite side is d = 0.07 m, and the adjacent side is L - d = 0.20 m - 0.07 m = 0.13 m. Therefore:

tan(θ) = (opposite side) / (adjacent side)

tan(θ) = 0.07 m / 0.13 m

θ ≈ 28.072°

The force applied by the stick on the floor:

Force = Tension × cos(θ)

Force = 5.072 N × cos(28.072°)

Force ≈ 4.565 N

Therefore, the magnitude of the normal reaction force from the floor on the stick is approximately 4.565 N.

Learn more about force here:

https://brainly.com/question/30507236

#SPJ11

The spring constant, k = 250 N/mThe displacement of spring, x = 12 cm = 0.12 mThe mass of the box, m = 250 g = 0.25 kgCoefficient of friction, μk = 0.23The force acting on the box when it's in contact with the spring is given by the Hook's law:F = -kx = -250 × 0.12 = -30 NAs

the box is launched across the floor, there are two forces acting on it: The force due to the spring and the friction force. The net force is given by:F = Fspring + FfrictionThe force due to the spring,Fspring = -30 NThe frictional force,Ffriction = μk × FNwhere FN is the normal force acting on the boxFN = mgAs the box is moving with a constant velocity, the acceleration is zero, i.e. the net force acting on it is zero. Thus,F = Fspring + Ffriction = 0-30 + μk × mg = 0The speed of the box when it is launched can be calculated using the principle of work and energy.

The energy stored in the spring is given byWspring = 1/2 kx²Wspring = 1/2 × 250 × 0.12²Wspring = 1.8 JThis energy is transferred to the box and is equal to its kinetic energy.Wspring = KEKE = 1/2 mv²We know the mass of the box, m = 0.25 kgThus,1.8 = 1/2 × 0.25 × v²v = 10.43 m/sTherefore, During the motion, the two forces act on the object. The net force is zero as acceleration is zero. The principle of work and energy is applied to calculate the launch speed of the box.

TO know more about that displacement visit:

https://brainly.com/question/11934397

#SPJ11

The weight of the measuring stick, when balanced by the support force at the 1 m mark, is 470.88 N. This is due to the torque exerted by the 8 kg rock hanging from the stick.

First, we calculate the torque caused by the weight of the rock. The weight of the rock can be calculated using the formula: weight = mass × acceleration due to gravity. So, the weight of the rock is (8 kg) × (9.81 m/s^2) = 78.48 N.

The weight of the rock exerts a torque about the fulcrum point, which is at the 1 m mark. The torque caused by the weight is given by the formula: torque = weight × distance. Since the distance from the fulcrum to the rock is 6 m (7 m - 1 m), the torque caused by the weight of the rock is (78.48 N) × (6 m) = 470.88 N·m.

To balance the torques, there must be an equal and opposite torque acting at the fulcrum. This torque is provided by the support force acting at the 1 m mark. Since the stick is in rotational equilibrium, the torque caused by the support force is equal in magnitude but opposite in direction to the torque caused by the weight of the rock. Therefore, the weight of the measuring stick is also 470.88 N.

Hence, the weight of the measuring stick, when balanced by the support force at the 1 m mark, is 470.88 N.

To know more about rotational equilibrium,

https://brainly.com/question/31142588

#SPJ11

Answer:

The origin of science can be traced back to ancient Egypt and the Mesopotamia from about 3500 to 3000 BC. The achievements of these two civilizations in mathematics, astronomy, and medicine have reached and shaped the Greek natural philosophy in the classical era, and they usually formally try to explain events in the material world with natural causes . After the fall of the Western Roman Empire, in the first few centuries of the Middle Ages (approximately 400-1000 AD), knowledge about the ancient Greeks’ world concepts was gradually forgotten in Western Europe , while in the Muslim world of the Golden Age of Islam Was preserved in. From the 10th century to the 13th century, Western Europe retrieved the writings of ancient Greece and absorbed the research of Islamic scholars. Natural philosophy was revived, and then transformed in the scientific revolution that began in the 16th century The new ideas and discoveries during this period broke away from ancient Greek ideas and traditional methods. The rapid role of scientific method in acquiring knowledge, but the institutionalization and professionalization of science did not begin to take shape until the 19th century

To match the Mustang's acceleration, the Mini Cooper would need to drive at approximately 12.76 mph.

For more questions on acceleration

https://brainly.com/question/460763

#SPJ8

The Mustang can accelerate from 0 to 60 mph in a time of 5.9 s. Magnitude of the Mustang's acceleration 10.17 mph/s.

We need to find the speed at which the Mini Cooper can match the magnitude of the Mustang's acceleration. To match the magnitude of the Mustang's acceleration, the Mini Cooper must accelerate at the same rate. The radius of the circle in which the Mini Cooper can turn = 32 ft.

The diameter =

64 ft = 64/5280 miles

= 0.012121212 miles.

Distance covered to turn

= Circumference of the circle = 2πr

= 2 × (22/7) × (32/5280) miles

= 0.012152382 miles.

Let the time taken to turn be t seconds. The average speed of the Mini Cooper while turning = Distance covered / Time taken

= 0.012152382/t mph

If the Mini Cooper must accelerate at the same rate as the Mustang, we have:10.17 mph/s = acceleration of Mini Cooper while turning

= v/t mph/s,

where v is the speed of the Mini Cooper in mph while turning.v = 10.17 t mph/s ………. (i)The acceleration of the Mustang is equal to the tangential acceleration of the Mini Cooper while turning, given by:

a = v^2/r mph/s10.17 mph/s

= v^2/32 ft/sv

= 8 mph ………. (ii)From equations (i) and (ii), we get:

10.17 t = 8t

= 0.786 s.

The Mini Cooper must drive at a speed of 8 mph while turning to match the magnitude of the Mustang's acceleration

To know more about Magnitude visit:

https://brainly.com/question/30033702

#SPJ11

The transmission you are referring to can be represented as a front-wheel drive, electronically controlled transmission with four forward speeds and a torque capacity of 135 pound-feet.

To represent the given transmission with its specific characteristics, follow these steps:

1. Specify the drive type: Since the transmission is front-wheel drive, mention this as the primary drive type.

2. Mention the control mechanism: As the transmission is electronically controlled, emphasize that it relies on electronic systems for shifting gears and controlling various aspects of the transmission.

3. Indicate the number of forward speeds: State that the transmission has four forward speeds. This means it has four different gear ratios for moving the vehicle forward.

4. Specify the torque capacity: Mention that the transmission is capable of handling a torque capacity of 135 pound-feet. Torque is the rotational force generated by the engine and transmitted to the wheels.

5. Combine all the information: Bring together the above details in a concise manner to represent the transmission accurately. For example, you can say, "The transmission is a front-wheel drive, electronically controlled system with four forward speeds and a torque capacity of 135 pound-feet."

By following these steps, you can effectively represent the transmission based on its characteristics of drive type, control mechanism, number of forward speeds, and torque capacity.

For more such questions on transmission, click on:

https://brainly.com/question/27960058

#SPJ8

Answer:

true

Explanation:

i think it's true I'm not exactly sure

False. If Earth were suddenly put into the same orbit around the Sun as Venus, it would not immediately heat up to the same surface temperature as Venus.

The surface temperature of Venus, which averages around 460 degrees Celsius (860 degrees Fahrenheit), is primarily due to its extremely dense and predominantly carbon dioxide atmosphere, as well as other factors.

Venus has a thick atmosphere composed mainly of carbon dioxide (CO2), with a pressure about 90 times greater than Earth's atmospheric pressure. This dense atmosphere creates a greenhouse effect, trapping heat near the surface and causing the extreme temperatures. The greenhouse effect is a result of the atmosphere's ability to absorb and re-radiate infrared radiation, effectively trapping heat and raising the temperature.

On the other hand, Earth's current atmosphere is primarily composed of nitrogen (78%) and oxygen (21%) with trace amounts of other gases, including carbon dioxide. The concentration of carbon dioxide in Earth's atmosphere is much lower compared to Venus.

Learn more about temperature here:

https://brainly.com/question/7510619

#SPJ11

Answer: The binary number 11011 is 27 as a decimal number

Explanation:

Answer:

The pushing force and the skier's mass

(A) is correct option.

Explanation:

Given that,

Mass = 64 kg

Weight = 608 N

Velocity = 21 m/s

Forward force = 45 N

We need to calculate the reaction force of the snow pushing  on the skier

Using given data,

The reaction force of the snow pushing  on the skier is equal to the pushing force and the skier's mass.

Hence, The pushing force and the skier's mass

(A) is correct option.

The two key events in skiing are the air friction (air resistance) that pushes on a skier's body and the friction between the ski base and the snow. Thus, option A is correct.

A thin lubricating water layer produced while skiing can be used to explain the low sliding friction between skis and snow. For sliding to take place, this extremely thin water film is necessary.

While numerous frictional forces work to counter the skier's motion, gravity acts to speed the skier down the hill. Downhill skiing heavily relies on reducing friction.

Therefore, forces from snow reactions, friction, and gravity. Skiers are subject to these factors. In order to maintain equilibrium, a skier must control these pressures through both proactive and defensive actions.

Learn more about force here:

https://brainly.com/question/14853868

#SPJ5

The  catch is made when the ballplayer is at the highest point of his leap, baseball player's speed immediately after stopping the ball is 3.6 m/s.

To solve this problem, we can use the principle of conservation of momentum. Before catching the ball, the player and the ball each have their own momentum. After catching the ball, their momenta must add up to zero, as the player comes to a stop.

The momentum of an object is given by the product of its mass and velocity. The player's momentum before catching the ball is zero since he is at rest. The momentum of the ball before being caught is (140 g) * (24 m/s).

To find the player's speed immediately after stopping the ball, we can calculate the momentum of the ball-player system after the catch. Since the momentum must be conserved, the magnitude of the player's momentum after the catch will be equal to the magnitude of the ball's momentum before the catch.

We can set up the equation:

(71 kg)(v) = (140 g)(24 m/s)

Solving for v, the player's speed after stopping the ball, we get:

v = (140 g)(24 m/s) / (71 kg)

Calculating this expression, we find v = 3.6 m/s. Therefore, the player's speed immediately after stopping the ball is 3.6 m/s.

Learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

The time interval required to complete one revolution of an electron is 1.08 x 10⁻⁷ s or 10⁸ ns. The formula to determine the time interval required to complete one revolution of an electron is: T = 2πm/eBv

T = 2πm/eBv

Where, T is the time interval required to complete one revolution of an electron, m is the mass of an electron, which is 9.11 x 10⁻³¹ kg

e is the charge of an electron, which is 1.60 x 10⁻¹⁹

CB is the magnitude of the magnetic field, which is 1.87 m/s

v is the speed of an electron, which is 1.58 x 10⁷ m/s.

Substitute the above values in the formula:

T = 2 x π x 9.11 x 10⁻³¹ / 1.60 x 10⁻¹⁹ x 1.87 x 10⁻³ x 1.58 x 10⁷

= 1.08 x 10⁻⁷ s

The time interval required to complete one revolution of an electron is 1.08 x 10⁻⁷ s or 10⁸ ns.

To know more about electron, refer

https://brainly.com/question/30128752

#SPJ11

The relationship between the radius of circular motion and the centripetal force, when the mass undergoing the circular motion is kept constant, is described by the following equation: F = m * (v^2 / r)

Where:

F is the centripetal force

m is the mass of the object undergoing circular motion

v is the velocity of the object

r is the radius of the circular path

According to this equation, the centripetal force is directly proportional to the square of the velocity (v^2) and inversely proportional to the radius (r).

This means that as the radius of the circular motion decreases, the centripetal force required to maintain that motion increases. Conversely, if the radius increases, the required centripetal force decreases.

In simpler terms, the tighter the circular path (smaller radius), the greater the centripetal force needed to keep the object moving in that path. On the other hand, if the circular path becomes wider (larger radius), the required centripetal force decreases.

To know more about circular motion

https://brainly.com/question/20359929

#SPJ11

The electrical potential difference between the plates is 40 V.

The magnitude of the electric field at point p = 5.0 × 104 N/C

Distance between the plates = 0.80 mm = 0.80 × 10-3 m

The formula used to find the electrical potential difference between the plates is,

V = Ed

Where,

V = electrical potential difference between the plates

E = electric field strength

d = distance between the plates.

Substituting the given values in the formula,

V = Ed= 5.0 × 104 N/C × 0.80 × 10-3 m= 40 V

Learn more about electric field: https://brainly.com/question/30544719

#SPJ11