When configuring ACLs (Access Control Lists) on a router to deny traffic sent to the 10.10.16.0/21 network, you should use the wildcard mask 0.0.7.255.
The /21 subnet mask is equivalent to 255.255.248.0. To find the wildcard mask, subtract each octet in the subnet mask from 255 (e.g., 255-255, 255-255, 255-248, 255-0). This results in the wildcard mask 0.0.7.255. In the access-list statement, use this wildcard mask to define the range of IP addresses that should be denied. For example, you could use "access-list 101 deny ip any 10.10.16.0 0.0.7.255" to deny all IP traffic from any source to the specified network.
To know more about IP addresses visit:
brainly.com/question/31026862
#SPJ11
You recognize that the threat of malware is increasing, even for your home computer. You want to use Windows Defender to protect your home computer from malware.
In this lab, your task is to configure Windows Defender as follows:
⢠Automatic scanning setting:
o Frequency: Saturday
o Approximate time: 12:00 am
o Type: Full scan (A quick scan checks the areas of the computer that spyware is likely to affect, and a full scan checks all files and programs on the computer)
o Check for updated definitions before scanning: Enabled
⢠Default actions settings:
o Severe alert items: Remove
o High alert items: Remove
o Medium alert items: Remove
o Low alert items: Allow
o Apply recommended actions: Enabled
⢠Advanced settings:
o Scan email: Enabled
o Scan removable drives: Enabled
⢠Administrator settings:
o Display items from all users of this computer: Enabled
When configuration is complete perform a Quick Scan.
To open Windows Defender, select the small icons view in Control Panel or type MSASCui in the search box on the taskbar.
The steps include setting automatic scanning frequency and type, default actions for different alert levels. It can be accessed through Control Panel or by searching for "MSASCui" on the taskbar.
What are the steps to configure Windows Defender for malware protection on a home computer?The paragraph describes how to configure Windows Defender to protect a home computer from malware by setting up automatic scanning on a specific day and time, selecting the type of scan, and enabling updates before scanning.
The default actions settings for different alert levels are also defined, along with advanced settings such as scanning emails and removable drives.
The configuration is done with administrator settings to display items from all users of the computer.
Finally, a quick scan is performed after the configuration. Windows Defender can be opened in Control Panel or by typing MSASCui in the search box on the taskbar.
Learn more about steps
brainly.com/question/16996355
#SPJ11
Awake() is called after Start() (T/F):
The given statement "Awake() is called after Start()" is False because in Unity, Awake() and Start() are both initialization functions, but they are called in a specific order.
Awake() is called first when a script is initialized, even before the game starts. This function is used to set up references between scripts, initialize variables, or perform any other setup tasks that need to be done before the game begins. Awake() is called only once per script instance during its lifetime.
On the other hand, Start() is called after Awake() and just before the first frame update. Start() is also used for initialization tasks, but it is mainly meant for tasks that depend on other scripts having already been initialized. Like Awake(), Start() is called only once per script instance during its lifetime.
In summary, Awake() is called before Start() in the Unity scripting execution order, and both functions serve different purposes in setting up the initial state of game objects and their components.
You can learn more about function at: brainly.com/question/30721594
#SPJ11
a network technician is setting up a segmented network that will utilize a separate isp to provide wireless access to the public area for a company. which of the following wireless security methods should the technician implement to provide basic accountability for access to the public network? a. pre-shared key b. enterprise c. wi-fi protected setup d. captive portal
The wireless security method that the network technician should implement to provide basic accountability for access to the public network is a captive portal.
A captive portal is a web page that is displayed to users when they first connect to a public wireless network. It requires users to authenticate or agree to terms and conditions before being granted access to the network. By requiring users to authenticate, a captive portal provides basic accountability for access to the network, as the network administrator can track who has accessed the network and when.
Pre-shared key (PSK) is a wireless security method that uses a shared password or passphrase to authenticate users. While PSK can provide some level of security for a private wireless network, it is not suitable for a public network as the password would need to be widely distributed and could be easily shared or compromised.
To know more about wireless security method,
https://brainly.com/question/13058162
#SPJ11
TRUE/FALSE. Stack algorithms can never exhibit Belady's anomaly
The statement "Stack algorithms can never exhibit Belady's anomaly" is true because stack algorithms always evict the page that was least recently used, regardless of the number of available page frames.
Belady's anomaly is a phenomenon in page replacement algorithms where increasing the number of available page frames may actually lead to an increase in the number of page faults. This can occur in certain types of page replacement algorithms, such as the optimal page replacement algorithm, where the algorithm may choose to evict a page that will be needed in the future.
However, stack algorithms are immune to Belady's anomaly because they always evict the page that was least recently used, regardless of the number of page frames available.
This means that increasing the number of page frames in a stack algorithm will never result in more page faults, because the algorithm will always choose the least recently used page to evict when it needs to make space for a new page. Therefore, stack algorithms are not subject to Belady's anomaly.
Learn more about Stack algorithms https://brainly.com/question/29994213
#SPJ11
Besides Exit Time, transition conditions can be driven by
Besides Exit Time, transition conditions in animations can be driven by parameters such as triggers, booleans, floats, and integers.
These parameters help control the transition between animation states, allowing for more complex and interactive animations. Animation Parameters are variables that are defined within an Animator Controller that can be accessed and assigned values from scripts. This is how a script can control or affect the flow of the state machine. Default parameter values can be set up using the Parameters section of the Animator window, selectable in the top right corner of the Animator window
So, besides Exit Time, transition conditions in animations can be driven by parameters such as triggers, booleans, floats, and integers.
Learn more about transition at
https://brainly.com/question/17998935
#SPJ11
Which XXX would replace the missing statement in the following algorithm? ListinsertAfter(students, curNode, newNode) { if (students-head == null) { students--head = newNode students tail = newNode } XXX { students tail-next = newNode newNode--prev = students tail students-tail = newNode } else { sucNode = curNode+next newNode-next = sucNode newNode--prev = curNode curNode--next = newNode sucNode-prev = newNode } } a. else if (curNode == students--head) b. else if (sucNode == students tail) c. else if (curNode != students head) d. else if (curNode students tail)
The purpose of XXX is to indicate that a condition is missing in the algorithm. The options to replace it are:
else if (curNode == students-head)else if (sucNode == students tail)else if (curNode != students head) else if (curNode == students tail).What is the purpose of the XXX in the given algorithm?The missing statement in the algorithm should be "b. else if (sucNode == students tail)".
This statement checks if the current node is the last node in the list.
If it is, then the new node is inserted after the current node, which is also the tail node, by updating the next and previous pointers accordingly.
If the current node is not the last node, then the new node is inserted between the current node and the next node, by updating the next and previous pointers of the nodes involved.
Learn more about algorithm
brainly.com/question/31936515
#SPJ11
The following untracked working tree files would be overwritten by merge.
When Git detects untracked files in a working tree, it means that they have not yet been added to the Git repository. In the event of a merge conflict, Git will attempt to merge all changes, including those made to untracked files.
However, if the changes made to these untracked files overlap with changes made in the merge commit, Git will prompt the user with the message "The following untracked working tree files would be overwritten by merge." This message indicates that the untracked files in the working tree would be lost if the merge were to proceed, and that the user must first commit or stash the changes to these files before merging. By committing or stashing the changes to the untracked files, the user can ensure that they are not lost during the merge process.
To know more about Git repository visit:
brainly.com/question/30585647
#SPJ11
What Nutanix product simplifies routine database operations?
A) Era
B) Calm
C) Flow
D) Leap
Nutanix A) Era simplifies routine database operations.
Nutanix Era is a database-as-a-service (DBaaS) platform that simplifies database administration, management, and operations. It automates common tasks such as provisioning, patching, and upgrading, making it easier for IT teams to manage their databases.
With Era, IT teams can create and manage databases across multiple clouds, and they can also take advantage of built-in backup and disaster recovery capabilities.
Era provides a self-service portal for developers to easily provision databases on-demand and provides IT teams with visibility and control over database usage and performance. Era helps organizations reduce costs, improve efficiency, and streamline their database operations. So A is correct option.
For more questions like Nutanix click the link below:
https://brainly.com/question/31845413
#SPJ11
Fine termination type causes the robot to ____ at the destination position before moving to the next position.
Accelerate
"FINE termination type causes the robot to stop at the destination position before moving to the next position." Option C is correct.
The FINE termination type in robotics refers to a behavior where a robot halts at its designated destination position before proceeding to the next position. This termination type ensures precision and accuracy in the robot's movement. By stopping precisely at the intended location, the robot can perform tasks such as object manipulation, pick-and-place operations, or precise measurements.
This behavior helps minimize errors and improves the overall efficiency and effectiveness of the robot's operations. FINE termination type is particularly useful in applications where precise positioning and controlled movements are essential.
Option C holds true.
The complete question:
FINE termination type causes the robot to _____ at the destination position before moving to the next position.
A. MOVE CONTINUOUSLYB. SPEED UPC. STOPD. SLOW DOWNLearn more about robotics: https://brainly.com/question/28484379
#SPJ11
This problem studies the effect of changing page sizes in a demand paging system. The following sequence of requests for program words is taken from a 460-word program: 10, 11, 104, 170, 73, 309, 185, 245, 246, 434, 458, and 364. Main memory can hold a total of 200 words for this program, and the page frame size will match the size of the pages into which the program has been divided. Calculate the page numbers according to the page size, divide by the page size, and the quotient gives the page number. The number of page frames in memory is the total number, 200, divided by the page size. For example, in problem (a) the page size is 100, which means that requests 10 and 11 are on Page 0, and requests 104 and 170 are on Page 1. Therefore, the number of page frames is two.
a. Find the success frequency for the request list using a FIFO replacement algorithm and a page size of 100 words (there are two page frames).
b. Find the success frequency for the request list using a FIFO replacement algorithm and a page size of 20 words (10 pages, 0 through 9).
c. Find the success frequency for the request list using a FIFO replacement algorithm and a page size of 200 words.
d. What do your results indicate? Can you make any general statements about what happens when page sizes are halved or doubled?
e. Are there any overriding advantages in using smaller pages? What are the offsetting factors? Remember that transferring 200 words of information takes less than twice as long as transferring 100 words because of the way secondary storage devices operate (the transfer rate is higher than the access, or search/find, rate).
f. Repeat (a) through (c) above, using a main memory of 400 words. The size of each page frame will again correspond to the size of the page.
g. What happened when more memory was given to the program? Can you make some general statements about this occurrence? What changes might you expect to see if the request list was much longer, as it would be in real life?
h. Could this request list happen during the execution of a real program? Explain. i. Would you expect the success rate of an actual program under similar conditions to be higher or lower than the one in this problem?
The purpose of this problem studying is to analyze the impact of different page sizes on the success frequency of a request list using a FIFO replacement algorithm in a demand paging system
What is the purpose of this problem in studying the effect of changing page sizes in a demand paging system?
The problem involves studying the impact of changing page sizes on the success frequency of a demand paging system.
A sequence of requests for program words is given, and the success frequency is calculated for different page sizes using a FIFO replacement algorithm.
The results are analyzed to make general statements about the impact of page size on system performance and to evaluate the advantages and disadvantages of using smaller pages.
The problem is also extended to examine the effect of increasing main memory size on system performance and to consider the impact of longer request lists.
Finally, the feasibility of the given request list occurring during the execution of a real program is discussed, and the expected success rate of an actual program under similar conditions is considered.
Learn more about problem studying
brainly.com/question/23847197
#SPJ11
Which part of Tableau Blueprint is log file cleanup included in?
Log file cleanup is included in the Maintenance and Administration part of the Tableau Blueprint.
What is a Tableau blueprint?
Tableau Blueprint is a step-by-step guide to becoming a data-driven organization. It provides concrete plans, recommendations, and guidelines across critical foundational work and three primary workstreams that will turn repeatable processes into core capabilities.
This part focuses on ensuring the smooth running of the Tableau system and includes tasks such as managing system settings, optimizing performance, and managing backups and upgrades.
Log file cleanup is an important aspect of system maintenance as it helps to keep the system running smoothly by freeing up storage space and reducing clutter in the system logs.
Read more about Tableau blueprint at https://brainly.com/question/31844089
#SPJ11
if an application-level environment setting is applied to a model, how might you store the output of a dissolve tool into another geodatabase?
In a GIS environment, an application-level environment setting is a configuration that affects the behavior of specific tools or the entire application. The dissolve tool is used to combine overlapping or adjacent features into a single feature, usually based on an attribute field. A geodatabase is a collection of geographic datasets, and you may want to store the output of the dissolve tool in another geodatabase.
To store the output of a dissolve tool into another geodatabase, follow these steps:
1. Ensure that the application-level environment setting is applied to the model as needed.
2. Run the dissolve tool with the desired input features, attribute field, and other settings.
3. In the tool parameters, specify the output feature class location by selecting the desired geodatabase as the destination.
4. Run the tool to create the dissolved feature class in the specified geodatabase.
By specifying the output location for the dissolve tool within the tool parameters, you can store the output of a dissolve operation in another geodatabase, while taking into account the application-level environment settings applied to the model.
To learn more about GIS, visit:
https://brainly.com/question/29775060
#SPJ11
This material property controls spreading of light on microsurface detail:
The material property that controls spreading of light on microsurface detail is called surface roughness.
Surface roughness refers to the irregularities or deviations in the surface of a material. When light interacts with a surface that has microsurface details, such as small bumps or scratches, the roughness of the surface causes the light to scatter in different directions, rather than reflecting directly off the surface.
This scattering of light results in a blurring effect, which can make the surface appear duller or less distinct. Therefore, controlling the surface roughness of a material is important for applications such as optical coatings, where precise control of the spreading of light on microsurface details is necessary for optimal performance.
For more questions like Light click the link below:
https://brainly.com/question/10709323
#SPJ11
An example of an "____ ____" would be if Router A thinks Router B is the next hop, but Router B thinks Router A is the next hop.
An example of a "routing loop" would be if Router A thinks Router B is the next hop, but Router B thinks Router A is the next hop.
This can occur in a network when there are multiple paths between routers and each router is trying to determine the most efficient route to take. In this scenario, Router A sends a packet to Router B, which then sends the packet back to Router A, creating a loop. This loop can continue indefinitely, leading to network congestion and potentially causing the network to crash.
To prevent routing loops, network administrators can use various techniques such as routing protocols that employ loop prevention mechanisms like split horizon, poison reverse, and hold-down timers. Split horizon involves routers not advertising routes back out the interface from which they were learned. Poison reverse is when a router sends a route back to the router it received the route from with a higher metric to indicate that the route is no longer available.
Hold-down timers prevent a router from accepting route updates for a certain amount of time after receiving a withdrawal notice for that route. By using these techniques, routing loops can be avoided, and network performance can be improved.
Learn more about network administrators here: https://brainly.com/question/28729189
#SPJ11
How many audio listeners can be in a Unity scene?
In Unity, the number of audio listeners that can be present in a scene is dependent on the platform being used.
For desktop platforms such as Windows and Mac, there is no limit to the number of audio listeners that can be in a scene. However, for mobile platforms such as iOS and Android, there is a limit of one audio listener per scene due to performance limitations.
Additionally, having multiple audio listeners in a scene can negatively impact performance, as each listener requires additional processing power and can cause audio glitches.
It is therefore recommended to limit the number of audio listeners in a scene and optimize their use to improve performance.
Learn more about Unity at
https://brainly.com/question/31843949
#SPJ11
The purpose of the 1s in a subnet mask is to tell the router which part of the IP address is a ____ ID.
The purpose of the 1s in a subnet mask is to tell the router which part of the IP address is a network ID.
A subnet mask is a 32-bit binary number that is used to divide an IP address into network and host portions.
The network portion of the IP address is identified by the 1s in the subnet mask, while the host portion is identified by the 0s.
When a router receives a packet, it uses the subnet mask to determine which part of the IP address represents the network ID and which part represents the host ID.
This information is used to route the packet to the correct network and host. Subnet masks are an essential part of IP networking and are used to create subnets and manage IP address allocation.
Learn more about subnet mask at
https://brainly.com/question/30612359
#SPJ11
When configuration WPA2 Enterprise on a WLAN, which additional security component configuration is required?A. NTP serverB. PKI serverC. RADIUS serverD. TACACS server
The additional security component configuration required when configuring WPA2 Enterprise on a WLAN is a "RADIUS server." Option C is the correct answer.
When setting up WPA2 Enterprise on a WLAN, a RADIUS (Remote Authentication Dial-In User Service) server is needed for authentication and authorization of users. The RADIUS server acts as a central authentication server that validates user credentials and grants access to the network. It allows for more secure and granular control over user access compared to WPA2 Personal.
Option C, "RADIUS server," is the correct answer as it correctly identifies the additional security component required for WPA2 Enterprise configuration. The RADIUS server is responsible for managing user authentication and authorization in the network, enhancing the security of the WLAN.
You can learn more about WLAN at
https://brainly.com/question/27975067
#SPJ11
BGP is a (distance-vector / Link State / Exterior Gateway) protocol.
BGP, or Border Gateway Protocol, is an Exterior Gateway Protocol (EGP) used for exchanging routing information between different Autonomous Systems (AS) on the internet.
Unlike Interior Gateway Protocols (IGPs) such as OSPF and RIP which use Link State or Distance Vector algorithms, BGP uses a Path Vector algorithm to determine the best path for routing traffic between AS networks.
BGP operates by exchanging network reachability information with other BGP routers, which allows each router to build a complete view of the internet topology. BGP routers use various attributes such as AS path length, next hop address, and local preference to select the best path for forwarding traffic to a particular destination.
One of the key benefits of BGP is its ability to support policy-based routing, which allows network administrators to control how traffic flows through their network by setting rules based on factors such as cost, bandwidth, and network congestion.
In summary, BGP is an Exterior Gateway Protocol that uses a Path Vector algorithm to exchange routing information between different Autonomous Systems on the internet. It provides advanced routing capabilities and supports policy-based routing, making it a crucial protocol for managing complex network topologies.
You can learn more about BGP at: brainly.com/question/22311165
#SPJ11
What are the pseudocode instructions used for?
Pseudocode instructions are used to outline the logical steps of a program without using specific programming syntax. They serve as a helpful tool for developers to plan and communicate program logic before beginning actual coding.
Why do programmers use pseudocode instructions?Pseudocode instructions are used to outline the logical steps of a program in a language-independent way. They allow developers to focus on the algorithm and overall program structure, without worrying about the specific syntax of a particular programming language. By using pseudocode, developers can plan and communicate program logic more effectively before beginning actual coding.
When developing software, it's important to have a clear plan of what the program should do, how it should do it, and in what order. Pseudocode provides a way for developers to outline these steps in a simple, easy-to-understand format. It can also help identify potential issues with the program logic before coding begins, saving time and effort in the long run.
Pseudocode instructions can be used to describe a wide range of programming tasks, from simple arithmetic operations to complex algorithms. By breaking down a program into logical steps, developers can more easily understand how different parts of the program fit together and interact.
Learn more about Pseudocode instructions
brainly.com/question/30507187
#SPJ11
Instead of including every column in the SELECT clause, you can use an ampersand (&) to indicate that you want to include all columns. T/F
False. Instead of an ampersand (&), you can use an asterisk (*) to indicate that you want to include all columns in the SELECT clause.
This statement returns all columns (i.e., fields) from the Customers table, including columns such as CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, and Fax.Using the asterisk symbol can be useful when you need to retrieve a large number of columns or when you are not sure which columns you need to select. However, it is generally considered good practice to explicitly list the columns you need to retrieve, rather than using the asterisk symbol, as it can make your queries more efficient and easier to understand.
To learn more about ampersand click on the link below:
brainly.com/question/30166177
#SPJ11
You use the ____ clause to list data in a specific order.
a. LIST BY
b. ORDER
c. SET ORDER
d. ORDER BY
ORDER BY is a SQL clause used to list data in a specific order based on one or more columns in a table. It allows you to sort the results of a SELECT statement in either ascending (ASC) or descending (DESC) order.
For example, if you have a table of customer data and you want to list the customers in alphabetical order by their last name, you would use the following syntaxSELECT * FROM customersORDER BY last_name ASCThis would return list of customers sorted by their last name in ascending order.You can also specify multiple columns to sort by, such as sorting by last name and then by first name:SELECT * FROM customerORDER BY last_name ASC, first_name ASC;This would sort the customers first by their last name in ascending order, and then by their first name in ascending order.
To learn more about ORDER click on the link below:
brainly.com/question/13059832
#SPJ11
you manage a windows computer that is shared by multiple users. recently, a user downloaded and installed two malware programs on the computer. the applications had a .msi extension. what is the first line of defense in protecting your system against applications like these from being copied or downloaded to your system?
The first line of defense in protecting your system against applications like these from being copied or downloaded to your system is to implement effective security policies and measures. This includes using antivirus software that can detect and block malicious programs from being downloaded or executed on the system.
It is also important to educate users on safe browsing habits and warn them about the risks of downloading unknown files or clicking on suspicious links.
know more about the antivirus software
https://brainly.com/question/17209742
#SPJ11
a binary number is an example of which of the following? A. a microprocessor
B. a digital signal
C. a computer program
D. an analog signal
A binary number is an example of a digital signal. Binary numbers consist of only two digits, 0 and 1, which represent two states (on and off) in digital systems. Option B is correct.
A binary number is a number expressed in the base-2 numeral system, which uses only two symbols (0 and 1) to represent numbers. In digital electronics, binary numbers are used to represent and manipulate data, as they can be easily represented using electronic circuits that operate using two voltage levels (such as 0V and 5V) to represent 0 and 1.
A digital signal is a signal that uses discrete values to represent data, such as binary numbers. Digital signals are used in digital communications, computers, and other electronic devices that rely on binary numbers for processing and storage of information.
Therefore, option B is correct.
Learn more about binary number https://brainly.com/question/31102086
#SPJ11
Which DNS lookup does an access point perform when attempting CAPWAP discovery?A. CISCO-DNA-CONTROILLER.localB. CAPWAP-CONTROLLER.localC. CISCO-CONTROLLER.localD. CISCO-CAPWAP-CONTROLLER.local
The DNS lookup that an access point performs when attempting CAPWAP discovery is "CISCO-CAPWAP-CONTROLLER.local." Option D is the correct answer.
When an access point (AP) is attempting CAPWAP discovery, it performs a DNS lookup to find the CAPWAP controller. In this case, the AP will perform a DNS query for the hostname "CISCO-CAPWAP-CONTROLLER.local" to discover the CAPWAP controller's IP address.
The specific hostname "CISCO-CAPWAP-CONTROLLER.local" is commonly used as the default DNS name for CAPWAP controller discovery. By performing this DNS lookup, the access point can identify and establish a connection with the CAPWAP controller, which is responsible for managing and controlling the AP's operation.
Option D, "CISCO-CAPWAP-CONTROLLER.local," correctly identifies the DNS lookup that the access point performs during CAPWAP discovery.
You can learn more about DNS at
https://brainly.com/question/13112429
#SPJ11
To qualify a column name, precede the name of the column with the name of the table, followed by a(n) ____.
a. asterisk (*)
b. period (.)
c. comma (,)
d. percent sign (%)
To qualify a column name, precede the name of the column with the name of the table, followed by a(n) period (.). Correct Option: b. period (.)
When referring to a column name in SQL, it is important to include the name of the table to avoid ambiguity or confusion when multiple tables are involved in a query.
The table name is followed by a period (.) and then the name of the column. For example, if we have a table called "employees" and a column called "salary", we would refer to it as "employees.salary".
It is also important to note that if the column name contains spaces or special characters, it should be enclosed in square brackets. For example, if we have a column called "employee name" in our "employees" table, we would refer to it as "employees.[employee name]".
Using proper syntax when writing SQL queries is crucial to ensure accurate results and prevent errors. Remember to always include the table name before the column name, separated by a period.
This will help to ensure that your queries are clear and unambiguous, making it easier to understand and maintain your database.
Visit here to learn more about Column:
brainly.com/question/22085941
#SPJ11
A sentinal value is that value that cause the loop to stop or terminate. It meets the conditionA) TrueB) False
The statement is true because a sentinel value is a specific value that is used to signal the end of a loop or a program.
In programming, a loop often reads input from the user or from a file until a specific condition is met. The sentinel value is used to signal the end of the input and cause the loop to terminate.
For example, consider a program that reads a list of integers from the user until the user enters a sentinel value of -1 to indicate the end of the input. The program would use a loop to read the input values and check if each value is equal to the sentinel value. If the value is equal to the sentinel value, the loop would terminate, and the program would move on to the next step.
Sentinel values are often used in input validation and error handling to ensure that a program does not continue to run indefinitely or produce incorrect results due to unexpected input. By using a specific sentinel value to signal the end of input, a program can ensure that it processes only the intended input values and avoids errors or unexpected behavior.
Learn more about sentinel value https://brainly.com/question/28541937
#SPJ11
You want to make a purchase online, what connection makes transmitting information secure
The connection that makes transmitting information secure when making a purchase online is a secure sockets layer (SSL) encryption.
What type of encryption makes transmitting information secure when making an online purchase?When making an online purchase, it is essential to ensure that the transmission of sensitive information, such as credit card details, is secure. SSL encryption provides a secure connection between the web server and the user's browser. It encrypts data in transit and ensures that any information passed between the two remains private and confidential.
SSL encryption is indicated by a padlock icon in the web browser's address bar, and the website's URL begins with "https" instead of "http." The SSL encryption technology is widely used by reputable e-commerce websites to safeguard their users' personal and financial information.
Learn more about SSL encryption
brainly.com/question/31465675
#SPJ11
When using code completion, you can accept the current selection in the suggestions list with Ctrl+Shift+Enter. IntelliJ IDEA Community will not only insert the selected string, but also turn the current code construct into a syntactically correct one (balance parentheses, add missing braces and semicolons, and so on). T/F?
True. When using code completion in IntelliJ IDEA Community, you can accept the current selection in the suggestions list with Ctrl+Shift+Enter. IntelliJ IDEA will not only insert the selected string,
but also turn the current code construct into a syntactically correct one, including balancing parentheses, adding missing braces and semicolons, and so on. This feature is known as "smart completion" and can be a great time-saver for developers. When using code completion, you can accept the current selection in the suggestions list with Ctrl+Shift+Enter. IntelliJ IDEA Community will not only insert the selected string, but also turn the current code construct into a syntactically correct one (balance parentheses, add missing braces and semicolons, and so on).
learn more about IntelliJ IDEA here:
https://brainly.com/question/31678479
#SPJ11
Inadvertent Communication: Email received by mistake
Inadvertent communication refers to a message that is sent or received unintentionally. This can happen in various ways, such as accidentally sending an email to the wrong recipient or forwarding a message that was not intended to be shared. One common example of inadvertent communication is receiving an email by mistake.
Receiving an email by mistake can happen for several reasons, including typos, incorrect email addresses, or glitches in the email system. When this happens, it is important to handle the situation professionally and ethically. The first step is to acknowledge the mistake and notify the sender that they have sent the email to the wrong recipient. It is also important to avoid reading or sharing the contents of the email with anyone else.
Inadvertent communication can be embarrassing and potentially damaging, especially if sensitive information is involved. To avoid these situations, it is important to double-check email addresses before sending messages and to use caution when forwarding or replying to messages.
You can learn more about communication at: brainly.com/question/22558440
#SPJ11
By taking ownership of the mistake and communicating openly and honestly with the recipient(s), you can minimize the impact of the inadvertent communication.
Figure out inadvertent communication?Inadvertent communication can happen when an email is sent by mistake. This can be an embarrassing situation, but there are steps you can take to mitigate the impact.
First, it's important to acknowledge the mistake and take responsibility for it. Send a follow-up email to the recipient(s) and apologize for the mistake. Explain that the email was not intended for them and that you would appreciate it if they could delete the message without reading it.
If the email contained sensitive information, such as personal or confidential information, consider contacting the recipient(s) directly by phone or in person to discuss the situation and ensure that appropriate steps are taken to protect the information.
It's also a good idea to review your email practices to prevent similar mistakes from happening in the future. Consider using email software that includes features such as delay delivery or confirmation prompts before sending messages.
Mistakes happen, and how you handle them can make all the difference. By taking ownership of the mistake and communicating openly and honestly with the recipient(s), you can minimize the impact of the inadvertent communication.
Learn more about Inadvertent Communication
brainly.com/question/14455356
#SPJ11
in this exercise you will complete a class that implements a shopping cart as an array of items. the file item.java contains the definition of a class named item that models an item one would purchase. an item has a name, price, and quantity (the quantity purchased). the file shoppingcart.java implements the shopping cart as an array of item objects. 1. complete the shoppingcart class by doing the following: a. declare an instance variable cart to be an array of items and instantiate cart in the constructor to be an array holding capacity items. b. fill in the code for the increasesize method. your code should be similar to that in listing 7.8 of the text but instead of doubling the size just increase it by 3 elements. c. fill in the code for the addtocart method. this method should add the item to the cart and update the totalprice instance variable (note this variable takes into account the quantity). d. compile your class.
Here's the completed code for the Shopping Cart class:
public class ShoppingCart {
private Item[] cart;
private int totalItems;
private double totalPrice;
private int capacity;
public ShoppingCart(int capacity) {
cart = new Item[capacity];
totalItems = 0;
totalPrice = 0.0;
this.capacity = capacity;
}
private void increaseSize() {
Item[] newCart = new Item[capacity + 3];
for (int i = 0; i < totalItems; i++) {
newCart[i] = cart[i];
}
cart = newCart;
capacity = capacity + 3;
}
public void addToCart(Item item) {
if (totalItems == capacity) {
increaseSize();
}
cart[totalItems] = item;
totalItems++;
totalPrice += item.getPrice() * item.getQuantity();
}
}
The completed Shopping Cart class has an instance variable cart which is an array of Item objects. In the constructor, the cart array is instantiated to be an array holding capacity items.
The instance variable totalItems keeps track of the number of items currently in the cart, while totalPrice keeps track of the total price of all items in the cart. The instance variable capacity is used to determine when the cart array needs to be increased in size.
The increaseSize method creates a new array with a capacity of 3 elements greater than the current cart array. The elements in the current cart array are then copied to the new array, and the cart variable is set to reference the new array.
The addToCart method adds the specified item to the cart array. If the cart array is already at capacity, the increaseSize method is called to increase its capacity. The totalItems and totalPrice instance variables are then updated accordingly.
For more questions like Capacity click on the link below:
https://brainly.com/question/31196313
#SPJ11
