The soil appears to be coarse-grained, with more than 50% of the particles being subrounded and the same size of roughly 0.25".
The remaining portion of the soil appears to be composed of smaller, visible particles that exhibit no plasticity. When washed with a squirt bottle, the soil took only one wash to separate the fines.
The Unified Soil Classification System (USCS) and the American Association of State Highway and Transportation Officials (AASHTO) are the two soil classification methods used in the United States.
The USCS is used to classify soils based on their grain size, plasticity, and organic content.
To know more about subrounded visit:
https://brainly.com/question/16011480
#SPJ11
where is a earthquake damage generally the greatest
a. california
b. alaska
c. in the rockies
where are the oldest rock earthquakes locates
a. adjacent to oceanic ridges
b. adjacent to oceanic trenches
c. adjacent to transform boundaries
where are the oldest rock on the Atlantic seafloor located
a. trenches
b. mid ocean ridges.
c.along coastlines
California is a earthquake damage generally the greatest. Adjacent to oceanic trenches are the oldest rock earthquakes locates. Mid ocean ridges are the oldest rock on the Atlantic seafloor located. Therefore, the correct options for 1, 2 and 3 are A, B and B respectively.
Due to its location along the San Andreas Fault, California is famous for some of the most severe earthquake damage. The state has a history of devastating earthquakes and is prone to frequent seismic activities.
Oceanic trenches are often found close to ancient rock earthquakes. When one tectonic plate subducts beneath another, it creates these trenches as a result of extreme stress and strain that can result in earthquakes.
Mid-ocean ridges are home to the oldest rocks on the Atlantic sea floor. As tectonic plates move apart along these ridges, magma rises to the surface and forms new crust. When the crust solidifies and cools, it becomes the oldest rock on the ocean floor.
Therefore, the correct options for 1, 2 and 3 are A, B and B respectively.
Learn more about Earthquakes, here:
https://brainly.com/question/29500066
#SPJ4
Calculate the average density of the Earth. Make sure the answer is in g/cm³.
rho = m/V two decimal places is sufficient, Sakai accepts a range
2.The average density of the rocks making up Earth’s crust is 2.7 – 3.0 g/cm³. Is this range greater than, less than, or equal to (includes) the average density of Earth?
To calculate the average density of the Earth, we need to divide its mass by its volume. It is calculated to be 5.52 g/cm³
The mass of the Earth is approximately 5.97 x 10²⁴ kilograms, and the volume is approximately 1.08321 x 10¹² cubic kilometers.
Mass of Earth = 5.97 x 10²⁴ kg = 5.97 x 10²⁷ g
Volume of Earth = 1.08321 x 10¹² km³ = 1.08321 x 10²⁷ cm³
We can calculate the average density using the formula:
Average Density = [tex]\frac{Mass}{Volume}[/tex]
Average Density = [tex]\frac{5.97 x 10^2^7}{1.08321 x 10^2^7}[/tex]= 5.52 g/cm³
The range of the average density of Earth's crust, which is 2.7 - 3.0 g/cm³, is less than the average density of the entire Earth.
Learn more about Earth's density in:
https://brainly.com/question/30460734
#SPJ4
Talk about one universalizing religion AND one ethnic religion to compare and contrast, in detail. Your comparison should include at least three specific examples of geographic observations. Some items that you could consider discussing include: distribution, diffusion, origins, places of worship, etc.
Religion is a belief system that can be divided into two broad categories: universalizing and ethnic.
Universalizing religions are those that attempt to attract followers from all over the world, while ethnic religions are those that are specific to certain ethnic or national groups.
Hinduism and Christianity are two such examples of a universalizing religion and an ethnic religion. In this essay, I will compare and contrast these two religions in terms of distribution, diffusion, origins, and places of worship.
Hinduism is the oldest religion in the world, with over one billion followers.
To know more about universalizing visit:
https://brainly.com/question/31497562
#SPJ11
True or false - Stanley Park is an example of a preserved wilderness that has latigely been unmodified by humans over the past 100 years. a) True. b) False
Stanley Park is an example of a preserved wilderness that has largely been unmodified by humans over the past 100 years is false. Therefore, the correct option is B.
The park has undergone significant modifications and human interventions over the years. Various changes have been made to the park's landscape and infrastructure, including the construction of roads, the removal and planting of tree species, the creation of pathways, the building of the Vancouver Aquarium, and the completion of the seawall, among other alterations.
Thus, the ideal selection is option B.
Learn more about Stanley Park here:
https://brainly.com/question/30371163
#SPJ4
LO #28 While at the beach, you put a small toy boat in the ocean. After an hour, you notice that the boat has drifted down the beach. Explain why this happens.
When a small toy boat is placed in the ocean, it will begin to move along with the flow of the water.
The current in the ocean is created by a variety of forces, including wind, tides, and the rotation of the Earth. The boat will move along with the flow of the water, which can cause it to drift away from its original position.
One of the main causes of the drift of the toy boat is the wind. The wind can cause the surface of the water to move, which creates a current. This current can push the toy boat along in a certain direction.
Depending on the strength and direction of the wind, the boat may move quite a distance away from its original location.
To know more about along visit:
https://brainly.com/question/26051328
#SPJ11
plete the follo by using 's law. You may calculator and graph Planck Law for Blackbodies to calculate temperature when given wavelength (and vice-v Blackbody Temperatures of the Electromagnetic Spectrum to identify the region of the elect where an object with the stated temperature emits most of its light. T (kelvins) max (angstroms) Case 1 2 3 4 5 8095 4380 3,670 5,800 7,880 Stars as Blackbodies 7896 3,580 4997 3678 6,000 EM Region Ultraviolet Infrared Visible Visible Ultraviolet V
The electromagnetic spectrum is the range of all forms of electromagnetic radiation. Blackbody radiation is emitted by an object at a particular temperature and is distributed over a wide range of wavelengths.
Planck's law gives the spectral density of the radiation emitted by a blackbody at a particular temperature for each wavelength. The blackbody temperature of the electromagnetic spectrum can be calculated from Planck's law and graphed to determine the region of the electromagnetic spectrum where an object at the given temperature emits the majority of its light.
Step1. The temperature (T) in Kelvin (K) is calculated using the following equation: T= b/λmax where b is the constant equal to 2.898x10^-3 mK and λmax is the wavelength of maximum intensity. The results are shown in the table below
Step2. Blackbody Temperatures of the Electromagnetic Spectrum to identify the region of the electromagnetic spectrum where an object with the stated temperature emits most of its light. Case Temperature (K) λmax (Å) EM Region 1 8095 4380 Ultraviolet 2 3,670 4997 Infrared 3 5,800 3678 Visible 4 7,880 6000 Visible 5 7896 3580 Ultraviolet.
To know more about electromagnetic spectrum refer here : brainly.com/question/23128823
#SPJ11
Radiation fog: a. is more likely to occur on summer nights than on winter ones. b. never occurs when light breezes (under 5 miles an hour) are present. c. often occurs in river valleys and low-lying areas. d. is usually shallowest around sunrise.
c. often occurs in river valleys and low-lying areas.
Radiation fog is a type of fog that forms through the process of radiative cooling, where the Earth's surface loses heat at night, causing the air near the surface to cool and reach its dew point. This type of fog tends to occur in specific geographical features such as river valleys and low-lying areas.
Option a is incorrect because radiation fog can occur in both summer and winter. However, it is more common during the cooler seasons when temperature differences between the surface and the air are more significant.
Option b is incorrect because light breezes do not prevent the formation of radiation fog. In fact, calm conditions with minimal wind can promote the formation and persistence of radiation fog.
Option d is incorrect because radiation fog is usually thickest around sunrise, not shallowest. This is because the cooling of the Earth's surface is most pronounced during the night, leading to the formation of dense fog, which gradually dissipates as the sun rises and heats the surface.
Therefore, the correct option is c, as radiation fog is often observed in river valleys and low-lying areas.
learn more about Radiation fog, here
https://brainly.com/question/31229372
#SPJ4
How does the relationship between the zone of accumulation and the zone of wastage alter the movement of a glacier?
2- What are the three types of mass wasting and how do they differ?
3- How does a stream's gradient vary along its length?
4- What is erosion?
1. The relationship between the zone of wastage. 2. Glaciers move due to the internal deformation. 3. Mass wasting refers to the downhill movement of rock. 4. Erosion is the process by which the Earth's surface.
1. The zone of accumulation refers to the area where snowfall exceeds melting, resulting in the accumulation of snow and ice. The zone of wastage, on the other hand, experiences more melting than snowfall, leading to the loss of ice through melting, sublimation, and calving.
2. Glaciers move due to the internal deformation of ice and the downslope flow of ice under gravity. In the zone of accumulation, where there is net accumulation of ice, the excess weight causes compression and deformation of the ice, leading to ice movement.
3. Mass wasting refers to the downhill movement of rock, soil, or debris under the influence of gravity.
4. Erosion is the process by which the Earth's surface is gradually worn away or removed through the action of various forces, such as water, wind, ice, or gravity. It involves the detachment, transportation, and deposition of weathered material, including rock particles, soil, and sediment. Erosion can occur through different mechanisms. For instance, water erosion can be caused by the force of running water that dislodges and carries away sediment.
To learn more about Earth's surface
https://brainly.com/question/1406428
#SPJ11
An estuary in which salinities tend to be higher away from the
ocean entrance than near the ocean entrance is called a salt wedge
estuary.
True
False
True, an estuary in which salinities tend to be higher away from the ocean entrance than near the ocean entrance is called a salt wedge estuary.
An estuary is a place where freshwater from rivers mixes with saltwater from the sea and forms an estuary that is a unique environment for plant and animal life.There are four types of estuaries that have different characteristics and features, which include salt wedge estuaries, partially mixed estuaries, well-mixed estuaries, and fjord estuaries. Salt wedge estuaries are usually found in the areas where freshwater from the river enters the ocean.
The salinity of seawater is higher than freshwater, which makes it more dense, and it settles to the bottom of the estuary where it forms a salt wedge. As seawater comes in from the ocean, it pushes the saltwater wedge towards the land, where it becomes thicker and deeper.
To know more about salinities visit:
https://brainly.com/question/14575146
#SPJ11
A. Read the USGS's The San Andreas Fault publication located at the following link (it is also included in the content section of Unit 3 on D2L Brightspace): http://pubs.usgs.gov/gip/earthq3/ B. Answer the following questions: 1. Which two plates act to form the San Andreas fault? 2. A strike-slip boundary mean that plates are moving in what direction, relative to one another? What is another name for this type of plate boundary? 3. In your own words, explain what processes occur to create "great earthquakes" like that experienced in San Francisco in 1906. 4. When is the San Andreas fault thought to have originated, and how much displacement has occurred since that time? 5. What is a "seismic gap"? 6. What are the three main steps mentioned in the article that can be done to defend people from earthquakes' hazards? 7. With all of the environmental hazards of some areas of California, why do you think people still want to live there? Think about topics covered previously in this class (i.e. climate, vegetation, etc.).
The San Andreas Fault is formed between the Pacific plate and the North American plate. A strike-slip boundary means that plates are moving in a horizontal direction, sliding past one another.
Another name for this type of plate boundary is a transform boundary. "Great earthquakes" like that experienced in San Francisco in 1906 occur due to sudden movements along faults. The force of the plates' movement against each other causes stress to build up along the fault.
When the stress is released suddenly, it results in a massive earthquake. The San Andreas Fault is thought to have originated about 30 million years ago. Since then, approximately 200 miles of displacement has occurred.
A seismic gap is an area along a fault where little to no earthquakes have occurred for a long period of time. This suggests that the fault is locked and could produce a significant earthquake in the future. The three main steps mentioned in the article that can be done to defend people from earthquakes' hazards are as follows: Identify seismic hazards and assess the risks, develop mitigation measures to reduce risks, and promote earthquake preparedness.
Learn more about Pacific plate
https://brainly.com/question/5145050
#SPJ11
What does the presence of veristic portrait art of the
Romans say about Roman culture?
The presence of veristic portrait art of the Romans says that Roman culture highly valued realism and the depiction of naturalism in art.
Veristic portrait art is a type of portraiture that attempts to create a highly realistic depiction of the sitter by emphasizing the natural and sometimes unflattering features of their face and body. This style was popular in ancient Rome and was often used to depict important figures such as political leaders and wealthy citizens. What this reveals about Roman culture is that they valued realism in art, perhaps as a reflection of their focus on practicality and order in other areas of life.
Veristic portrait art also reflects the Roman emphasis on individuality, as each portrait attempts to capture the unique features and character of the sitter rather than simply idealizing them as a generic representation of their status. Overall, the presence of veristic portrait art of the Romans speaks to the value they placed on realism and individuality in their culture.
Learn more about wealthy citizens
https://brainly.com/question/5659214
#SPJ11
