to assign an interface on the router with the ip address 192.168.1.250 and subnet mask of 255.255.255.0. We use the command
ip address 192.168.1.250 255.255.255.0
What is an IP Address?
An Internet Protocol address is a numerical label that identifies a computer network that employs the Internet Protocol for communication. An example of one is 192.0.2.1. Network interface identification and location addressing are the two primary purposes of an IP address.
Data's IP address reveals both its source and the destination to which it should be sent. Static or dynamic IP addresses are also possible. An appliance connected to a network that requires a permanent address is given a static IP address (e.g., a server, firewall or router).
To learn more about IP Address, use the link given
https://brainly.com/question/14219853
#SPJ1
what standard ics network computing device is used to program the field devices for the current operations.
ICS stands for industrial control systems, which are networks and systems for command and control SCADA
What is an ICS SCADA device?ICS stands for industrial control systems, which are networks and systems for command and control.SCADA (Supervisory Control and Data Acquisition) systems make up the largest subcategory of ICS. SCADA is used to help automate and manage industrial operations that have grown too complicated or time-consuming for human oversight and management.SCADA is very helpful for processes that can be remotely monitored and controlled, especially when it's possible to cut waste and boost productivity. In large industrial systems, supervisory control and data acquisition is the process of gathering, transmitting, processing, and visualizing monitoring signals from a variety of machines.We provide a range of options for processing insights. There are four different types of SCADA systems: IoT SCADA system, Distributed SCADA system, and Monolithic SCADA system.To learn more about SCADA refer
https://brainly.com/question/14819386
#SPJ4
you have written a set of functions that are stored in the .funcs file. how can you use the functions in this file in scripts that you write? (choose all that apply.)
In order to use the functions included in the '.funcs' file in a script, you can modify either your login script or your scripts to load the '.func' function into memory. Therefore, options B and D hold the correct answers.
In the context of computer programming, a script is a sequence of instructions or a program that executes without being complied.
Based on the case where you save a set of sorted functions in the '.funcs' file for using them in the future. Whenever you need to have access to these saved functions to write them in scripts:
you can modify your login script so that the log script loads the '.funcs' functions into memory or you can change your scripts so that the scripts load '.funcs' into memory."
The complete question is as follows:
you have written a set of functions that are stored in the .funcs file. how can you use the functions in this file in scripts that you write? (choose all that apply.)
A. By calling this file .funcs, the functions in the file are automatically available whenever you log in.
B. Modify your login script, so the login script loads the .funcs functions into memory.
C. Use the call scripts .func command in your scripts.
D. Modify your scripts so that they load .funcs into memory.
"
You can learn more about Scripts at
https://brainly.com/question/26121358
#SPJ4
Design a pseudo program that asks the user for two numbers and then sends these two numbers as arguments to four arithmetic functions: addition multiplication division and modulus the remainder after dividing one number by the other
function add(a, b){ //This is an addition function
return a+b;
}
function mod(a, b){ //This is a module function
return a%b;
}
function mul(a, b){ //This is the multiplication function
return a*b;
}
function div(a, b){ //This is a division function
return a/b;
}
var a=prompt("Enter a number");
var a1=parseInt(a); //Convert string input to Integer
var b=prompt("Enter a number");
var b1=parseInt(b); //Convert string input to Integer
var add=add(a1,b1); //Call the addition function
var multiplication=mul(a1,b1); //Calling the multiplication function
var division=div(a1,b1); //Calling the split function
var module=mod(a1,b1); //Call function modulus
document.write("Addition = " + addition + "<br>");
document.write("Multiplication = " + multiplication + "<br>");
document.write("Division = " + division + "<br>");
document.write("Module = " + module + "<br>");
You can learn more through link below:
https://brainly.com/question/23631339#SPJ4
Anyone have answers to 3.6 code practice on project stem, Python Fundamentals? Thanks in advance. Been struggling hard.
Actual Question:
Write a program to input 6 numbers. After each number is input, print the smallest of the numbers entered so far.
Sample Run
Enter a number: 9
Smallest: 9
Enter a number: 4
Smallest: 4
Enter a number: 10
Smallest: 4
Enter a number: 5
Smallest: 4
Enter a number: 3
Smallest: 3
Enter a number: 6
Smallest: 3
The program that prints the smallest each time a number is inputted is as follows:
myList = []
for i in range(6):
num = int(input("Enter a number: "))
myList.append(num)
myList.sort()
print(f"Smallest : {myList[0]}")
How to write the program?From the question, we have the following parameters:
Number of inputs = 6
Requirement = Print the smallest of the numbers entered so far
This means that we make use of iteration for a range of 6
Also, we need to make use of a list
So, the program in Python is as follows:
# initialize a list
myList = []
# Iterate to get 6 inputs and perform the required operations
for i in range(6):
# Get each input
num = int(input("Enter a number: "))
# Append input to a list
myList.append(num)
# Sort the list
myList.sort()
# Print the smallest
print(f"Smallest : {myList[0]}")
Note that comments are used to explain each line
Read more about programs at
https://brainly.com/question/26497128
#SPJ1
which of the following statements is false? a scalar processor processes one data item at a time. vliw architectures execute instructions in parallel based on a fixed schedule determined when the code is compiled. superscalar architectures with speculative executions are suitable for embedded processors in a vector processor, a single instruction operates simultaneously on multiple data items.
It is false that superscalar architectures with speculative executions are suitable for embedded processors in a vector processor, a single instruction operates simultaneously on multiple data items.
A superscalar processor is a CPU that uses instruction-level parallelism, a type of parallelism, on a single processor. A superscalar processor can execute more than one instruction during a clock cycle in contrast to a scalar processor, which can only carry out one instruction at a time. This is accomplished by simultaneously dispatching numerous instructions to various execution units inside the processor.
As a result, it enables higher throughput than would otherwise be possible at a specific clock rate (the number of instructions that can be executed in a unit of time). Each execution unit is an execution resource within a single CPU, such as an arithmetic logic unit, rather than a separate processor (or a core if the processor is a multi-core processor).
To know more about superscalar click here:
https://brainly.com/question/16017283
#SPJ4
Can you see who tries to access a password-protected file, but does not put in the password?
Yes/no
Explanation:
Depending on the person.
Yes, if your cousins,parents,etc have opened it.
No, if people like hackers have done it.
all firewalls, including those using static packet filtering, stateful inspection, and application proxy, have one thing in common. what is it?
All firewalls, including those using static packet filtering, stateful inspection, and application proxy, have one thing in common.It is rules
What are the 4 varieties of different firewall rules?There are three basic types of firewalls that are used by companies to protect their data & devices to keep destructive elements out of network, viz. Packet Filters, Stateful Inspection and Proxy Server FirewallsAn organization's previously set security policies are used to monitor and filter incoming and outgoing network traffic through a firewall, a network security device.A firewall is essentially the barrier that stands between a private internal network and the open Internet at its most basic level. There are four basic types of firewalls, each with a different way of operation,fire walls that filter packets.The earliest and most fundamental kind of firewalls are packet filtering firewalls.Gateways at the circuit level.Firewalls with stateful inspection.Gateways at the Application-LevelTo learn more about firewalls refer
https://brainly.com/question/13693641
#SPJ4
All firewalls, including those using static packet filtering, stately inspection, and application proxy, have one thing in common.
What are the 4 varieties of different firewall rules?Companies employ one of three main types of firewalls to safeguard their data and devices and keep malicious elements out of their networks, namely: Firewalls with packet filters, stately inspection, and proxy serversThrough a firewall, a network security device, incoming and outgoing network traffic is monitored and filtered based on previously established security policies for the company.At its most basic level, a firewall is essentially the barrier that sits between a private internal network and the public Internet.There are four primary forms of packet-filtering firewalls, each with a unique mode of operation. Packet filtering firewalls are the earliest and most basic type of firewalls.To learn more about firewalls refer:
brainly.com/question/13693641
#SPJ4
you want to update all packages in your system as well as their dependencies. which command should you use?
To update all packages in your system as well as their dependencies. You can use yum update .YUM is a graphical-based package management tool for RPM
What is the yum update command?For Linux systems using RedHat Package Manager (RPM), YUM (Yellowdog Updater Modified) is an open-source command-line and graphical package management tool.On a system, it makes it simple for users and system administrators to install, update, remove, or search software packages. Red Hat Enterprise Linux uses YUM as its main package management tool for setting up, deleting, and managing software packages.When installing, upgrading, and uninstalling software packages, YUM resolves dependencies.YUM may handle packages from either the system's installed repositories or from. yum update will update all of the installed packages if you run the command without any packages.Yum will only update the listed packages when one or more packages or package globs are given.Yum will make sure that all dependencies are met while updating packages.To learn more about yum update refer
https://brainly.com/question/13107800
#SPJ4
suppose the ram for a certain computer has 4m words, where each word is 16 bits long. a) what is the capacity of this memory expressed in bytes?
The capacity of this memory expressed is 2 bytes.
Why is RAM important in a computer?
The information that enables your computer complete its most crucial activities, like loading apps, accessing websites, and editing documents, is kept in RAM.Because your computer can quickly access the information in its short-term memory thanks to RAM, you can open apps and files more quickly.Random access memory is referred to as RAM.Because the data can be swiftly read and updated in any sequence, it is called random access.Contrast this with more traditional storage medium like CD-RWs, where data is accessible in a slower, predetermined sequence.The data and instructions that are now being used are stored in RAM.To learn more about RAM refer,
https://brainly.com/question/29245369
#SPJ4
a(n) character is a symbol that can be used as a general substitute for other characters or commands.
Wildcard character is a symbol that can be used as a general substitute for other characters or commands.
What is a wildcard character?Wildcards are special characters that can be used to search for many things with similar but different data since they can stand in for unknown characters in a text value. The retrieval of data based on a specific pattern match can also be aided by wildcards. Identifying every John on Park Street, for instance.The asterisk (*), which stands for one or more characters, and the question mark (? ), which stands for one character, are the two most used wildcards.A wildcard character in software is a type of placeholder that is represented by a single character, like an asterisk, and can be read as a variety of literal characters or an empty string.To learn more about wildcard character refer to:
https://brainly.com/question/28269734
#SPJ4
Mrs. Smith is trying to figure out if the grades on her tests correlated with her students’ GPA. She wants to look at those who have a test grade below 70% and a GPA below 2.5. How many rows would be left after she filters her query with the OR functions?
a. five
b. six
c. eight
d. eleven
Eleven rows would be left after she filters her query with the OR functions.
What is query language?
Query languages, also known as data query languages or database query languages (DQLs), are computer languages that are used to create queries in databases and information systems. The Structured Query Language is a well-known example (SQL). Query languages are broadly classed as either database query languages as well as information retrieval query languages. The distinction is that a database query language seeks factual answers to factual questions, but an information retrieval query language seeks documents holding information relevant to a field of investigation.
To learn more about query language
https://brainly.com/question/13440965
#SPJ13
chad is a network engineer. he is tasked with selecting a virtual private network (vpn) platform for his company. he chooses a solution that is inexpensive and runs on unix, although it is less scalable and less stable than other solutions. what has he chosen?
He has choosen LAN security and firewalls. A firewall helps protect your computer and data by regulating network traffic.
A firewall helps protect your computer and data by regulating network traffic. It accomplishes this by blocking unwanted and unsolicited inbound network traffic. A firewall authenticates access by checking this incoming traffic for any unauthorized stuff, such as hackers and viruses that could harm your computer.
Through a firewall, a network security device, incoming and outgoing network traffic is monitored and filtered based on previously established security policies for the company. At its most basic level, a firewall is essentially the barrier that sits between a private internal network and the public Internet. A firewall's primary job is to let safe traffic through while blocking hazardous traffic.
To know more about firewall click here:
https://brainly.com/question/13098598
#SPJ4
He has selected firewalls and Local Area Network (LAN) security.
The most widely used technique by administrators for securing a local area network is to install a firewall resource behind a single access point, such as an initial wireless router.
A firewall helps protect your computer and data by regulating network traffic. It accomplishes this by preventing unwanted and unsolicited inbound network traffic. A firewall authenticates access by checking this incoming traffic for any unwanted content, such as hackers and viruses that could harm your computer.
Through a firewall, a network security device, incoming and outgoing network traffic is monitored and filtered based on previously established security policies for the organisation. At its most basic level, a firewall is essentially the barrier that stands between a private internal network and the public Internet. A firewall's primary job is to let safe traffic through while blocking harmful traffic.
To know more about firewall click here:
brainly.com/question/13098598
#ADT1
what starting value of n would make this portion of the program repeat the block of code below the most amount of times?
It is called to run the same code more than once. Adding a conditional statement inside one or both branches of another is known as nesting. conditional phrasing.
The final list may contain repeated terms but will include every word from lists 1 and 2 in alphabetical order. Given that they are familiar with what the variables stand for, programmers will find it simpler to read and comprehend the code. On the computer executing the program you want to watch, launch Task Manager. Right-click the application on the Applications tab and choose Go To Process from the context menu. Switch to the Processes tab in the Task Manager and select the application's associated process to be highlighted.
Learn more about application here-
https://brainly.com/question/28650148
#SPJ4
our organization has just approved a special budget for a network security upgrade. what procedure should you conduct to develop your recommendations for the upgrade priorities?
The first step that you have to do is posture assessment. It is needed to to help you to identify areas of strength and also understand the organization's current state posture.
In business, posture assessment also known as posture validation. Posture assessment generally can be defined as the act of applying a set of rules to the posture data. Posture assessment or posture validation is needed to provide an posture token or also assessment of the level of trust that you can place in that endpoint. The posture token can be described as the one of the conditions in the authorization rules for network access.
Here you can learn more about posture assessment https://brainly.com/question/4606013
#SPJ4
which type of nat allows many computers to share a pool of routable ip addresses that number fewer than the computers?
A pool of routable IP addresses which is smaller than the number of computers can be shared by several computers thanks to dynamic NAT.
What is dynamic NAT?A private IP address or subnets inside the SD-WAN network are mapped many-to-one to a public IP address or subnet from outside SD-WAN network through dynamic NAT. In the LAN segment, traffic from several zones and subnets is delivered over just a single public (outside) IP address instead of using trusted (inside) IP addresses.Dynamic network address translation makes it possible to automatically map inside local and outside global addresses, in contrast to static NAT, which always maps inside local and outside global addresses. A collection or pool of public IPv4 addresses is used by dynamic NAT for translation.A private IP address or subnet inside the SD-WAN network is many-to-one mapped to a public IP address or subnet from outside network via dynamic NAT.To learn more about dynamic NAT refer to :
https://brainly.com/question/14281371
#SPJ4
This is a graded practice activity. This is not an actual quiz.
Question 1
Which of the following correctly prints the following calculation if x is 27 and y is 5?
Difference is: 22
O print Difference is: "+x-y)
O print Difference is " + (x-yl)
O print Difference is:" +strix-yll
O print Difference is:" +intix-yl
1 pts
Answer:
0
Explanation:
x=27
y=5
22+(27-5)
22+(22)
0
write a method called wordwrap that accepts a scanner representing an input file as its parameter and outputs each line of the file to the console, word-wrapping all lines that are longer than 60 characters. for example, if a line contains 112 characters, the method should replace it with two lines: one containing the first 60 characters and another containing the final 52 characters. a line containing 217 characters should be wrapped into four lines: three of length 60 and a final line of length 37.
A string that reaches a certain length is wrapped into new lines using the wordwrap() method.
Word wrap format: what is it?Word processing programs have a feature called "word wrap" that forces all text to fit inside specific margins.You can add line breaks from blocks of text with this online text wrap and line break tool. Use it to wrap the given text to a specified amount of characters. Text input: Text Warp: Text Wrap.When necessary, the multiline Textbox control's Word Wrap settings determine whether it should automatically wrap words to the start of the next line.A string that reaches a certain length is wrapped into new lines using the word wrap() method. It should be noted that this function might leave blank spaces at the start of lines.To learn more about Word wrap refer to:
https://brainly.com/question/26721412
#SPJ4
you are testing a new client server application and the application doesn't appear to be communicating successfully between the client and server. all network configuration settings have been verified but since the application is new, you are unsure of all the protocols that are used. what is a good first step in troubleshooting the problem?
Since all network configuration settings have been verified but since the application is new, a good first step in troubleshooting the problem is option C. Uninstall and reinstall the application.
What exactly does troubleshooting mean?Finding and fixing problems with complicated machines, electronics, computers, and software systems frequently involves troubleshooting, a methodical approach to problem-solving.
Note that Finding the root of a computer system error and fixing the corresponding hardware and software problems are done systematically through troubleshooting. The key to a successful resolution of a problem is to approach it logically and methodically.
Therefore, A program's associated files are deleted from the hard drive of a computer during an uninstall. The delete function only removes a portion of a program or a selected file, as opposed to the uninstall feature, which safely and effectively deletes all associated files.
Learn more about troubleshooting from
https://brainly.com/question/26417401
#SPJ1
See full question below
A: You are testing a new client server application and the application doesn't appear to be communicating successfully between the client and server. All network configuration settings have been verified but since the application is new, you are unsure of all the protocols that are used. What is a good first step in troubleshooting the problem?
a. configure the firewall to use a different profile
b. disable the firewall
c. uninstall and reinstall the application
d. reset the switch and router
a company intends to improve the productivity of its developers so that the programming is easier and can be finished quickly with fewer syntax errors. what should the company provide to its developers to work?
A standardized programming language called Structured Query Language (SQL) is used to administer relational databases and carry out various operations on the data they contain.
Python is arguably the most well-known general-purpose language, and it has hooks everywhere. from database administration and integration to online tools and systems management. A sort of software application called antimalware was developed to safeguard computers and information technology (IT) systems from malware. Computer systems are scanned by antimalware tools to prevent, identify, and remove malware. A Trojan cloaks itself as desired software or code. The Trojan can take control of victims' systems for harmful reasons after being downloaded by unwary users.
Learn more about antimalware here-
https://brainly.com/question/28025826
#SPJ4
Carla is creating a presentation that will include tables, lists, and charts. What will help her present these different types of content appropriately?
Answer:
An Excel spreadsheet will help her
Explain how the error card trick from the error detection lesson uses a parity scheme. Was it an even or odd parity scheme?.
The trick with the cards was the parity scheme as it added bits (row and column of other cards) to make each direction even, making it an even parity scheme.
You can learn more through link below:
https://brainly.com/question/24194840#SPJ4
The required answer is the error card trick uses an odd parity scheme to detect errors in the sequence of bits represented by the deck of cards. The parity card, set based on the value of the data bits, helps identify whether an error has occurred by checking if the total number of bits with a value of 1 is odd or even.
The error card trick from the error detection lesson uses an odd parity scheme. In an odd parity scheme, an additional bit, called a parity bit, is added to a group of data bits. The parity bit is set in such a way that the total number of bits (including the parity bit) with a value of 1 is always an odd number.
In the error card trick, a deck of cards is used to represent a sequence of bits. Each card is assigned a value of 0 or 1, and the deck is arranged to form a sequence of data bits.
To implement the odd parity scheme, an additional "parity card" is introduced. The parity card represents the parity bit and is set based on the value of the data bits. If the total number of cards (including the parity card) with a value of 1 is even, the parity card is set to 1 to make the total odd. If the total number of cards with a value of 1 is already odd, the parity card is set to 0.
During the trick, the magician shows the deck of cards (including the parity card) to the audience and asks them to remember the sequence of bits. Then, the magician turns away and asks an audience member to secretly flip any one card, introducing an error into the sequence.
To detect the error, the magician checks the parity of the sequence. If the total number of cards with a value of 1 (including the parity card) is still odd, the magician knows that no error occurred. However, if the total number of cards with a value of 1 is now even, the magician can determine that an error has occurred. By revealing the flipped card, the magician can identify the position of the error.
By using the odd parity scheme, the error card trick effectively detects whether an error has occurred in the sequence of bits. If the parity of the bits is inconsistent, it indicates the presence of an error. This parity-based approach helps the magician identify the position of the error card and perform the trick successfully.
Therefore, the error card trick uses an odd parity scheme to detect errors in the sequence of bits represented by the deck of cards. The parity card, set based on the value of the data bits, helps identify whether an error has occurred by checking if the total number of bits with a value of 1 is odd or even.
Learn more about error detection and parity schemes here:
https://brainly.com/question/18510618
#SPJ4
you have purchased a network-based ids. you have been tasked with deploying the device in a location where the entire network can be protected. where should you deploy it?
Since you have purchased a network-based ids. you have to deploy in demilitarized zone.
What is a server in a demilitarized zone?
An region that has been designated as a "demilitarized zone" by the parties to an armed conflict is one that they cannot occupy or use militarily.
Note that A demilitarized zone (DMZ or DZ) is a territory in which treaties or agreements between states, military powers, or opposing organizations restrict military installations, operations, or personnel. It serves as the exposed point to untrusted networks, typically the Internet. A DZ frequently located along a recognized border or border between two or more military alliances or powers.
Hence, A DMZ Network, often known as a "demilitarized zone," serves as a subnetwork that houses an organization's exposed, externally facing services in terms of computer security.
Learn more about demilitarized zone from
https://brainly.com/question/23318736
#SPJ1
what powershell cmdlet will import the cmdlets and scripts necessary to create and manage nano server vhd images?
The New-NanoServerImage PowerShell cmdlet can be used to create a new Nano Server Image. This will only produce a new Nano Server Image in a VHDX that contains the VM Guest drivers.
Which cmdlet is used to create a nano Server image?The bundled Nano Server Windows image (. wim) file is converted into a VHD or VHDX image using the New-NanoServerImage cmdlet, which also reuses the existing image if one already exists.Since there is no GUI on the server itself, Nano Server is a "headless" OS. The Nano management experience is dominated by PowerShell. Naturally, this implies you can use our IIS PowerShell cmdlets to handle IIS on Nano.With the aid of a graphical interface, the Nano Server Image Builder enables you to create a unique Nano Server image and bootable USB media. It generates images for deployment based on the inputs you supply.To Learn more About New-NanoServerImage Refer to:
https://brainly.com/question/25554117
#SPJ4
open the pt activity. perform the tasks in the activity instructions and then answer the question. which port does switch0 use to send frames to the host with the ipv4 address 10.1.1.5?
The port that Switch0 use to send frames to the host with the IPv4 address 10.1.1.5 is Fa0/11 (Option D)
What is IPv4 address?An IPv4 address, which is a 32-bit number, identifies a network interface.
When the ipconfig /all command is executed at the PC0 command prompt, the IPv4 address and MAC address are shown. When PC0 pings IPv4 address 10.1.1.5, the switch logs the source MAC address (from PC0) as well as the port to which PC0 is connected.
As a result, after getting the destination reply, the switch checks the destination MAC address against the MAC addresses provided in the MAC address database.
Running the display mac-address-table command on the PC0 Terminal program reveals two dynamic MAC address entries. The MAC address and port entry for the destination, which does not belong to PC0, must be the one for the IPv4 address 10.1.1.5.
Learn more about IP addresses:
https://brainly.com/question/29345454
#SPJ1
Full Question:
Which port does Switch0 use to send frames to the host with the IPv4 address 10.1.1.5?
Fa0/1Fa0/5Fa0/9Fa0/11Define a car class that is derived from the vehicle class given in question 2. definea class called sportscar that is derived fromcar class. be creative in choosing member variables and functions. write a driver program to test the car and sportscar classes.
A driver program to test the car and sportscar classes.
class Sportscar: public Car {
private:
int topSpeed;
string color;
public:
Sportscar(int, string);
int getTopSpeed();
string getColor();
};
Sportscar::Sportscar(int speed, string col): Car(speed) {
topSpeed = speed;
color = col;
}
int Sportscar::getTopSpeed() {
return topSpeed;
}
string Sportscar::getColor() {
return color;
}
int main() {
Sportscar car1(200, "red");
cout << "Top speed: " << car1.getTopSpeed() << "mph" << endl;
cout << "Color: " << car1.getColor() << endl;
return 0;
}
What is driver?
A device driver in computing is a computer software that manages or regulates a specific kind of device that is connected to a computer other automaton. A driver offers a software interface to hardware devices so that operating systems and other computer programmes can access hardware operations without having to be aware of the exact specifications of the hardware being utilised.
Through the computer bus and communications subsystem that the hardware links to, a driver communicates with the device. When a calling software calls a driver routine, the driver sends instructions to the device (drives it). The driver may call functions in the original calling application once the device transmits data back to it.
To learn more about driver
https://brainly.com/question/26084890
#SPJ4
What term or phrase can be used to describe the process of networks linking to one another using a variety of tools and strategies? broadband network connectivity tunneling protocol
Answer:
The appropriate term would be Network Connectivity.
Explanation:
for a display of 1920 pixels by 1080 pixels at 16 bits per pixel how much memory, in megabytes, is needed to store the image?
For a display of 1920 pixels by 1080 pixels at 16 bits nearly needed 4 MB precisely (3.955) bytes to store the image.
How to calculate the file size for a digital image?Stage 1: Increase the locators number of level pixels by the quantity of vertical pixels to get the complete number of pixels of the finder.
Stage 2: Increase complete number of pixels by the piece profundity of the indicator (16 digit, 14 piece and so forth) to get the all out number of pieces of information.
Stage 3: Partitioning the complete number of pieces by 8 equivalents the document size in bytes.
Stage 4: Gap the quantity of bytes by 1024 to get the record size in kilobytes. Partition by 1024 once more and get the document size in megabytes.
Calculation : 1920 x 1080 x 16 x 8 / 1024 / 1024 = 3995 bytes.
= 4 Megabytes.
To learn more about Digital literacy , refer :
https://brainly.com/question/14242512
#SPJ4
a(n) is any piece of data that is passed iwhen a function is called by its name during the execution of a program, then it isto a function when the function is called.
An argument is any piece of data that is passed when a function is called by its name during the execution of a program, then it is to a function when the function is called. The correct option is b.
What is execution of a program?To execute a program in a computer is to run the program in the computer and, by extension, to start it up. People run programs in use, and systems execute them. A program is executed using system memory.
An argument allows you to provide additional information to a function. The function can then use that information as a variable while running.
To put it another way, when you write a function, you can pass data in the form of an argument, also known as a parameter.
Thus, the correct option is b.
For more details regarding programming, visit:
https://brainly.com/question/11023419
#SPJ1
Your question seems incomplete, the missing options are:
a. global variable
b. argument
c. local variable
d. parameter
Identify some possible delivery systems for video programs
Some possible delivery systems for video programs are:
Radio broadcast frequencyCoaxial cableSatelliteOptic fiberWhich program delivery methods work the best?The first technologies for distributing videos to the general public were historically terrestrial broadcast TV systems. Following these systems naturally and with great success were cable and DTH (direct to home) satellite technologies.
In the past, these systems have been installed on-site using hardware, networks, and other links that were especially created for the purpose of transmitting video feeds between various facilities and entities in the supply chain.
Therefore, These are the five different ways that learning is delivered: face-to-face instruction, virtual classrooms, online learning, blended learning, and mobile learning.
Learn more about delivery systems from
https://brainly.com/question/28420229
#SPJ1
tom surveys the users of a new software product. one of the survey questions asks users to rate their preferences on a likert scale. tom addresses the dimension of usability known as .
Tom addresses the dimension of usability known as satisfaction. A collection of computer programs, documentation, and data is referred to as software. This is in contrast to hardware, which is the foundation of the system and does the real work.
What is Software?Software is a collection of computer programs, documentation, and data. This is in contrast to hardware, which is the foundation of the system and does the real work.
A set of instructions, data, or programs used to run computers and carry out specified activities is referred to as software. It is the inverse of hardware, which describes a computer's physical components. Software is a catch-all phrase for apps, scripts, and programs that execute on a device.
Examples of well-known computer software include: operating systems (such as Microsoft Windows, Linux, and macOS) productivity software (for example, Microsoft Office Suite including Word, Excel, and PowerPoint) Browsers on the internet (including Firefox, Chrome, and Safari).
To learn more about software refer to:
https://brainly.com/question/1538272
#SPJ4
