You will use a filter funnel in this experiment to

A )measure pH
B) collect pieces of cabbage
C) dry pieces of cabbage
D) separate cabbage from liquid

Answer:

only 2.5% is fresh water on earth

Answer:

The answer is 3%

Explanation:

deforestation i hope this helps

Answer:

Deforestation and Cultivation

Explanation:

First I am going to give the definition of deforestation:

Deforestation is basically the removal of trees.

The removal of trees leaves leaves very little vegetative cover to hold heavy rain fall. This is why mudslides and things happen. When the land is clear and flat, the water keeps on going instead of going into the soil. That water that keeps on going is called runoff water. If we planted trees by the rivers, that could take down the height of the floods in towns by 20%

At first I was going to say widening rivers, but that is a way to manage river water. When we lengthen the river, it is so that the water can take more time to reach the river canal.

Definition of Cultivation: The production of food by preparing the land to grow crops (especially on a large scale) animal husbandry - breeding and caring for farm animals. agriculture, tree farming - the cultivation of tree for the production of timber.

I was also going to say Cultivation. Over-cultivation is the excessive use of farmland to the point where productivity falls due to soil exhaustion or land degradation. Now this is actually why we have floods in the USA. The soil cannot soak up any water, therefore the water over flows and that is when a flood starts to happen.

I know this took some time but hope I could help :)

Answer:

It is a typical fires that started out of a lightning strike, or people carelessly starting it, or accidentally, or even arson, that went un-noticed and got out of hand.

Answer:

Explanation:

Forest fires always start by one of two ways - naturally caused or human caused. Natural fires are generally started by lightning, with a very small percentage started by spontaneous combustion of dry fuel such as sawdust and leaves. On the other hand, human-caused fires can be due to any number of reasons.

Answer:

28c

Explanation:

Answer:

The molarity of a 50.0 ml aqueous solution containing 10.0 grams of table sal, Nacl, is 3.42 [tex]\frac{moles}{L}[/tex]

Explanation:

Molarity is a unit of concentration based on the volume of a solution and is defined as the number of moles of solute per liter of solution. Then, the molarity of a solution is calculated by dividing the moles of the solute by the liters of the solution.

[tex]Molarity (M)=\frac{number of moles of the solute}{volume of the solution}[/tex]

Molarity is expressed in units ([tex]\frac{moles}{liter}[/tex]).

Then you must know the amount of moles of the NaCl solute. For that it is necessary to know the molar mass. Being:

the molar mass of NaCl is:  23 g/mole + 35.45 g/mole= 58.45 g/mole

Then a rule of three applies as follows: if 58.45 grams are present in 1 mole of NaCl, 10 grams in how many moles will they be?

[tex]moles=\frac{10 grams*1 mole}{58.45 grams}[/tex]

moles= 0.171

So you know:

Replacing in the definition of molarity:

[tex]Molarity (M)=\frac{0.171 moles}{0.05 L}[/tex]

Solving:

Molarity= 3.42 [tex]\frac{moles}{L}[/tex]

The molarity of a 50.0 ml aqueous solution containing 10.0 grams of table sal, Nacl, is 3.42 [tex]\frac{moles}{L}[/tex]

Answer:

23,900 joules

Explanation:

plato answer

Answer:

23,900 joules

Explanation:

Edmentum

Answer:

AgNO₃

Explanation:

Ag = Silver

NO₃ = Nitrate

Answer:

The correct option is;

Cylinder A contains a gas that has a temperature closest to absolute zero

Explanation:

From the kinetic theory of gases, the average speed of a gaseous molecule is found from the following equation;

[tex]v_{rms} = \sqrt{\frac{3\cdot R \cdot T}{MW} }[/tex]

Where:

[tex]v_{rms}[/tex] = rms speed which is the square root of the average of the velocities of the gas molecules squared which is used in place of the average of the gas molecules as the sum of the velocities of all the gas molecules in the cylinder is zero

R = Universal gas constant = 8.3145 J/(mol·K)

MW = Molecular weight of the gas

Hence where we have;

[tex]v_{rmsA}[/tex] = Average velocity of gas A = 0.0000001 m/s

[tex]v_{rmsB}[/tex] = Average velocity of gas B = 0.3 m/s

Since, R and MW are constant for the gas in cylinder A constant, therefore, as [tex]v_{rmsA}[/tex] ≈ 0 m/s, the temperature, [tex]T_A[/tex], of gas A is closest to absolute zero.

Answer:

20

Explanation:

Answer:

what?

Explanation:

science

Answer:

I believe the answer you're looking for is DNA, not sure though

Answer:

mass ( g ) = 348 g

Explanation:

First you know : M = mole / volume (L)

in question you have the M and V and the formula of SUBSTANCE ( KF )

first you get the number of mole from equation above

so 3 = no of mole / 2

no of mole = 3 × 2 = 6 moles

and the moles equation is no of moles = mass ( g ) / molecular weight ( g/mole )

so you have already calculate the moles and you can know the MW from the Question

Mw of KF = 39 + 19 = 58

so n = mass / MW

so 6 = mass / 58

mass ( g ) = 348 g

GOOD LUCK

Answer: A) Nebular Theory

Explanation:

Answer:

A)

Explanation:

Answer:

Hydrochloric Acid is the chemical name for HCI

Answer:

Hydrochloric Acid

Explanation:

Answer: [tex]CO[/tex] is the limiting reagent and [tex]Fe_2O_3[/tex] is the excess reagent.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} Fe_2O_3=\frac{42.7g}{159.69g/mol}=0.267moles[/tex]

[tex]\text{Moles of} CO=\frac{13.2g}{28g/mol}=0.471moles[/tex]

The given balanced equation is :

[tex]Fe_2O_3(s)+3CO(g)\rightarrow 2Fe(s)+3CO_2(g)[/tex]

According to stoichiometry :

3 moles of [tex]CO[/tex] require = 1 mole of [tex]Fe_2O_3[/tex]

Thus 0.471 moles of [tex]CO[/tex] will require=[tex]\frac{1}{3}\times 0.471=0.157moles[/tex]  of [tex]Fe_2O_3[/tex]

As given amount of [tex]Fe_2O_3[/tex] is more than the required amount , it is the excess reagent.Thus [tex]CO[/tex] is the limiting reagent as it limits the formation of product.

Answer:

red car will travel a much farther distance and at a faster speed as opposed to the blue car

Explanation:

Based on the information provided within the question Jenna can expect to observe that the red car will travel a much farther distance and at a faster speed as opposed to the blue car which will travel a shorter distance and at a lower speed. This is mainly because Jenna is applying an increased amount of force on the red car thus creating more acceleration and ultimately increasing the distance.

Answer:

Oxygen is the limiting reactant.

Explanation:

Hello,

In this case, given the reaction:

[tex]C_2H_6O(g) + 3O_2(g)\rightarrow 2CO_2(g) + 3H_2O(g)[/tex]

Hence, given the masses of both ethanol and oxygen, we are able to compute the available moles ethanol by:

[tex]n_{C_2H_6O}^{available}=0.461g*\frac{1mol}{46g}=0.01mol C_2H_6O[/tex]

Next, we compute the moles of ethanol that react with the 0.640 grams of oxygen considering their 1:3 molar ratio in the chemical reaction:

[tex]n_{C_2H_6O}^{consumed\ by\ O_2}=0.64gO_2*\frac{1molO_2}{32gO_2}*\frac{1molC_2H_6O}{3molO_2} =0.0067molC_2H_6O[/tex]

In such a way, since there are 0.01 available moles of ethanol but just 0.0067 moles are reacting, we evidence ethanol is in excess, therefore the oxygen is the limiting reactant.

Best regards.

Answer:

Oxygen O₂ will be the limiting reagent.

Explanation:

C₂H₆O(g) + 3 O₂(g) ⇒ 2 CO₂(g) + 3 H₂O(g)

First of all you must know by stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction) how much mass of each compound reacts. First of all, being:

the molar mass of each reagent is:

Then, since 1 mol of C₂H₆O and 3 moles of O₂ react by stoichiometry, the amount of mass that reacts is:

Now you apply a rule of three as follows: if 46 g of C₂H₆O reacts with 96 g of O₂ by stoichiometry, 0.461 g of C₂H₆O with how much mass of O₂ will they react?

[tex]mass of O_{2} =\frac{0.461 grams of C_{2}H_{6} O*96 grams ofO_{2} }{46 grams of C_{2}H_{6} O}[/tex]

mass of O₂= 0.962 grams

But 0.962 grams of O₂ are not available, 0.640 grams are available. Since you have less mass than you need to react with 0.461 g of C₂H₆O, oxygen O₂ will be the limiting reagent.

Answer:

Equal to the total mass

Explanation:

just took the test

Relative and average atomic mass both describe properties of an element related to its different isotopes. Out of these two Relative atomic mas is more accurate. Therefore, the correct option is option C.

Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes. It can be calculated by multiplying mass of a isotope to natural abundance of that isotope. In chemistry relative mass is equal to the mass of one-twelfth the mass of C-12 isotope .

Average atomic mass = (mass of first isotope× percent abundance of first isotope)+(mass of second isotope× percent abundance of second isotope)

The total mass of the reactants during a chemical change is equal to the total mass of the product.

Therefore, the correct option is option C.

To learn more about mass, here:

https://brainly.com/question/28704035

#SPJ5

Answer:

4) the one that is reduced, which is the oxidizing agent

Explanation:

An oxidizing agent is one that causes oxidation by gaining electrons from another atom/molecule.

Answer:

c

Explanation:

Answer: The SI unit for force is Newtons (N).

Answer:

Option B, Capillary action

Explanation:

Water molecules attach with the molecules of the surface of the container in which they are kept. This is because of the cohesive force within the molecules of water and adhesive force between the molecules of water and other substances.

The water rises up in a capillary tube because of water molecules adhere at the edges thereby creating a meniscus in the upside turned direction. The surface is kept intact by the surface tension

Now capillary action specifically occurs when adhesion to the surface of the container is higher than the cohesion between the water molecules.  

Hence, option B is correct

Answer:

458.7 mmHg

Explanation:

Step 1:

Data obtained from the question. This includes:

Initial volume (V1) = 70L

Initial pressure (P1) = 600 mmHg

Initial temperature (T1) = 20°C

Final temperature (T2) = 15°C

Final volume (V2) = 90L

Final pressure (P2) =...?

Step 2:

Conversion of celsius temperature to Kelvin temperature.

This is illustrated below:

T(K) = T (°C) + 273

Initial temperature (T1) = 20°C

Initial temperature (T1) = 20°C + 273 = 293K

Final temperature (T2) = 15°C

Final temperature (T2) = 15°C + 273 = 288K

Step 3:

Determination of the new pressure of the gas.

The new pressure of the gas can be obtained by using the general gas equation as shown below:

P1V1/T1 = P2V2/T2

600 x 70/293 = P2 x 90/288

Cross multiply to express in linear form

P2 x 90 x 293 = 600 x 70 x 288

Divide both side by 90 x 293

P2 = (600 x 70 x 288) / (90 x 293)

P2 = 458.7 mmHg

Therefore, the new pressure of the gas is 458.7 mmHg

Answer:

a

Explanation:

Answer:

The molarity is 1.26 [tex]\frac{ moles}{L}[/tex]

Explanation:

Molarity is a unit of concentration that is based on the volume of a solution and represents the number of moles of solutes contained in a liter. The molarity of a solution is calculated by dividing the moles of the solute by the liters of the solution and is expressed in units (moles / liter).

[tex]Molarity=\frac{number of moles of solute}{Volume}[/tex]

You must calculate the number of moles of CuSO₄. So, being:

the molar mass of CuSO₄ is

CuSO₄=63.54 g/mole + 32 g/mole + 4* 16 g/mole= 159.54 g/mole

Then it is possible to apply the following rule of three: if 159.54 g of CuSO₄ are present in 1 mole, 10 g in how many moles are they?

[tex]moles=\frac{10 g*1 mole}{159.54 g}[/tex]

moles= 0.063 moles

Then:

Replacing in the definition of molarity:

[tex]Molarity=\frac{0.063 moles}{0.05 L}[/tex]

Molarity= 1.26 [tex]\frac{ moles}{L}[/tex]

The molarity is 1.26 [tex]\frac{ moles}{L}[/tex]

Answer:

Fusion doesn't produce runway chain reactions the way fission can, so there's no need to worry about meltdowns.

Answer:

What ever you want. I made it like this because it would make the most logical sense with a mix of the Dot system.

Explanation:

Since the question says to explain yourself, and to predict, really any answer would be correct since it sounds like it's not asking for a correct answer, but more of an answer that would make sense to you and explain it. That's really what chemistry is, a bunch of educated responses and guesses with confidence.

Answer:

(A) CHCH

Explanation:

Hello,

Alkynes are formed when triple bonds are formed between carbons, it means that due to the triple bonds, three bonds are already exhausted and carbon atoms need four bonds to attain the octet, for that reason, an extra bond is allowed. Now, such extra bond, when talking about hydrocarbons is filled with hydrogens, for that reason the alkyne should be (A) CHCH as it also accomplishes the following formula which is not accomplished by the rest of the options:

[tex]C_nH_{2n-2}[/tex]

Since n=2, we have:

[tex]C_2H_2[/tex]

Which matches with CHCH.

Best regards.

Answer:

l

Explanation:

Answer:

Radioactive isotopes ranging from 11O to 26O have also been characterized, all short-lived. The longest-lived radioisotope is 15O with a half-life of 122.24 seconds, while the shortest-lived isotope is 12O with a half-life of 580(30)×10−24 seconds (the half-life of the unbound 11O is still unknown).