While onboarding is a full process including management and other employees and can continue up to 12 months, orientation is a crucial step for completing paperwork and other everyday activities.
All new hires receive onboarding, but the caliber of the onboarding matters. Too frequently, onboarding involves handing a new program a stack of paperwork and having a manager or HR specialist show them around the workplace while randomly introducing them to people. However, when onboarding is done well, it creates a basis for both the employee's and the employer's long-term success. It can boost output, foster engagement and loyalty, and support staff members' early career success in the new company. Orientation and onboarding are frequently mistaken terms.
Learn more about program here-
https://brainly.com/question/14618533
#SPJ4
what is the most important critical success factor when implementing an IT initiative is
Implementing an Information technology effort successfully depends on having a clear strategy, a knowledge of the objectives, adequate people, training, and equipment, as well as effective communication and collaboration between stakeholders.
An IT initiative's implementation can be a difficult endeavor that demands careful preparation and execution. Success depends on having a well-defined plan and a grasp of the initiative's aims and objectives. Additionally, it is crucial to guarantee that the project team is adequately staffed, trained, and equipped to complete the effort successfully as well as that stakeholders are communicating and working together effectively. Additionally, it's critical to make sure that the effort has a sufficient budget, a realistic timetable, and a system in place to monitor progress and assess success. An IT endeavor can easily go awry and cost a lot of money if there isn't a well-thought-out plan and the appropriate resources aren't available.
Learn more about Information technology here:
brainly.com/question/12947584
#SPJ4
Write a loop that continually asks the user what pets the user has until the user enters stop, in which case the loop ends. It should acknowledge the user in the following format. For the first pet, it should say You have one cat. Total # of Pets: 1 if they enter cat, and so on.
Sample Run
What pet do you have? lemur
What pet do you have? parrot
What pet do you have? cat
What pet do you have? stop
Sample Output
What pet do you have? lemur
You have one lemur. Total # of Pets: 1
What pet do you have? parrot
You have one parrot. Total # of Pets: 2
What pet do you have? cat
You have one cat. Total # of Pets: 3
What pet do you have? stop
The loop that continually asks the user what pets the user has until the user enters stop is written below.
What is a loop?As long as the condition is met, a for loop in Python is a control flow statement that is used to continually execute a set of instructions.
'''
# count of pets
count = 0
# read the user input
pet = input()
# loop that continues till the user enters rock
# strip is used to remove the whitespace
while pet.strip() != 'rock':
# increment the count of pets
count += 1
# output the pet name and number of pets read till now
print('You have a %s with a total of %d pet(s)' %(pet.strip(),count))
pet = input() # input the next pet
#end of program
Therefore, the loop is written above.
To learn more about the loop, visit here:
https://brainly.com/question/14390367
#SPJ1
In Excel, which direction does a Row go and does it use letters or numbers to track the cells? A. Vertical and Letters B. Vertical in numbers C. Horizontal and numbers D. Horizontal and Letters
Answer:
In Excel, a Row goes horizontally and uses numbers to track the cells. (Option D. Horizontal and Numbers)
binnj apple ipad case 1. what is a systems analyst? is systems analysis an art or science? do you think protagonists in this case are following a robust method?
A systems analyst is a professional who evaluates and implements information systems to support the goals and objectives of an organization. Whether systems analysis is considered an art or science is a matter of debate, with some experts viewing it as a combination of both. It involves a combination of technical and creative skills to design and implement information systems.
Systems Analysis can be considered both an art and science. It requires a combination of technical knowledge and analytical skills, as well as creativity and problem-solving ability. On the one hand, it involves a systematic and structured approach to understand the problem and come up with a solution. On the other hand, it also involves creativity to think beyond the existing solutions and find innovative ways to address the issue.
Learn more about system analyst: https://brainly.com/question/29331333
#SPJ4
who does the work to make sure product backlog items conform to the definition of done
The work to make sure product backlog items conform to the definition of done is usually the responsibility of the development team or the Scrum team.
What are product backlog?
A product backlog is a prioritized list of items that represents the work needed to develop a product. It is a living document that is continually updated and refined by the development team, product owner, and stakeholders in an Agile software development process, such as Scrum.
The product backlog contains a description of each item, known as a backlog item or user story, along with its estimated size and priority. The items at the top of the backlog are typically the highest priority and are scheduled to be worked on next. The product backlog is used to drive the development process and to ensure that the team is always focused on delivering the most valuable features and functionality to the customer.
The work to make sure product backlog items conform to the definition of done is usually the responsibility of the development team or the Scrum team. The team works together to ensure that the items are properly defined and meet the standards set by the definition of done before they are added to the backlog. The Scrum Master may also play a role in overseeing this process and ensuring that the team is following the definition of done.
Learn more about product backlog click here:
https://brainly.com/question/30456768
#SPJ1
Provide a Linux command line to accomplish each of the following tasks. Your answer in eachsubquestion should consist of a single command or pipeline of commands, with no separatingsemicolons (;). (Please verify before submitting that your solution consists of a single line.Use wc for this.) Before beginning this question, familiarize yourself with the commandsoutlined on the Linux handout. Keep in mind that some commands have options not listedon the sheet, so you may need to examine some man pages. Note that some tasks refer to afile myfile.txt. No myfile.txt is given. You should create your own for testing.(a) Print the 10th through 25th words (including the 10th and 25th words) in /usr/share/dict/words.You may take advantage of the fact that the words in this file are each on a separateline. Place your command pipeline in the file a1q1a.txt.(b) Print the (non-hidden) contents of the current directory in reverse of the normal order.Place your command pipeline in the file a1q1b.txt.(c) Print the number of lines in the text file myfile.txt that do not contain the stringcs246 (all in lower-case). Place your command pipeline in the file a1q1c.txt.(d) Print the first line that contains the string cs246 (all in lower-case) from the text filemyfile.txt. Place your command pipeline in the file a1q1d.txt.(e) Print the number of lines in the text file myfile.txt that contain the stringlinux.student.cs.uwaterloo.ca where each letter could be either upper-case or lower-case. (Hint: this is not as obvious as you may think–in addition to printing all linesthat it should print, make sure that you are testing that it is not printing lines that itshouldn’t print.) Place your command pipeline in the file a1q1e.txt.(f) Print all (non-hidden) files/directories in any subdirectory of the current directory thatend with lower-case .c (immediate subdirectories only, not subdirectories of subdirec-tories). Do not use find. (Hint: there’s an easy way to do this using only ls if you’recreative with globbing patterns.) Place your command pipeline in the file a1q1f.txt.(g) Out of the first 20 lines of myfile.txt, how many contain at least one digit? Place thecommand pipeline that prints this number in the file a1q1g.txt.(h) Print all (non-hidden) files in the current directory that start with a, contain at leastone b, and end with .c (these required letters must be in lower-case in order to match).Place your command pipeline in the file a1q1h.txt.(i) Print a listing, in long form, of all non-hidden entries (files, directories, etc.) in thecurrent directory that are executable by at least one of owner, group, other (the otherpermission bits could be anything). Do not attempt to solve this problem with find.Place your command pipeline in the file a1q1i.txt.
In that it lists files and directories, the list (ls) command is comparable to the DOS DIR command.
When you initially log into a Linux system, your current directory—which is also your home directory—is displayed when you simply type ls at a prompt ($). In Linux and other operating systems based on Unix, the ls command is used to list files or directories. The ls command enables you to list all files or folders in the current directory by default and further interact with them via the command line, similar to how you navigate in your File explorer or Finder with a GUI.
Learn more about command here-
https://brainly.com/question/3632568
#SPJ4
the ? is a cross-connect facility used for the termination and connection of outlet cables, dd cords, equipment cords, and in some cases, ado cables.
The DD is a cross-connect facility used to connect equipment cords, DD cords, outlet cables, and occasionally ADO cables.
What is the minimum requirement for each cable location in Grade 3 residential cabling?A minimum of two 4-pair balanced twisted-pair cables that meet or exceed category 6A requirements, one broadband coaxial cable, and one 2-fiber optical fiber cable, as well as their respective connectors at each equipment outlet, are required for grade 3.
In a telecommunications room, what is used to cross connect horizontal and backbone cable pairs?Turned pair cross-interface wire or fix ropes are utilized for cross-interfacing among flat and spine link matches at a broadcast communications room.
To know more about ADO cables visit :-
https://brainly.com/question/29754776
#SPJ4
a designer chooses to use a manufacturing process that decreases the feature size on the processor. all else being constant, will the performance likely increase, decrease, or stay the same?
The performance is likely to increase, as the feature size will be reduced, leading to increased efficiency of the processor.
Effect of Decreasing Feature Size on Processor PerformanceThe performance of a processor is largely determined by its feature size. As the feature size decreases, the processor can process more information in a given time due to the increased efficiency of its components. In this case, the designer has chosen to use a manufacturing process that decreases the feature size on the processor. This means that the processor will be able to process more information in a given time, leading to an increase in performance. All else being constant, the performance of the processor is likely to increase.
Learn more about processor: https://brainly.com/question/1504260
#SPJ4
to organize or focus the search, the process needs to be keywords driven; what you retrieve from a search will be dependent upon the computations you put on the search field. select one: true false
The correct answer is true to organize or focus the search, the process needs to be keywords driven; what you retrieve from a search will be dependent upon the computations you put on the search field.
The Saved Search Formula is one of NetSuite's best features. When generating a search, it allows users to use Oracle SQL Functions and/or Statements. CASE Statement is one of the most well-liked ones. It enables you to add logic to your formula and have it return either static or dynamic value. An information request is a Saved Search. You may search through hundreds, thousands, or even millions of records in NetSuite to get exactly what you need by defining criteria and results data.
To learn more about keywords click the link below:
brainly.com/question/16559884
#SPJ4
Kent needs to clean his computer keyboard because he was snacking and potato chip crumbs got under the keys. what's the first thing he should do? question 3 options: a. unplug it b. spray it with compressed air c. clean the keys with a vacuum wipe d. the keyboard with rubbing alcohol
The first thing Kent should do is unplug the keyboard. The first step in cleaning a computer keyboard is to unplug it from its power source.
This is a safety measure to prevent any electrical shock or damage to the keyboard while cleaning it. The next step would be to use a tool, such as compressed air or a vacuum, to remove any debris or crumbs that may have gotten trapped under the keys. After removing any loose debris, a microfiber cloth or wipe dampened with rubbing alcohol can be used to clean the keys and surfaces of the keyboard. It is important to use a gentle touch and not apply too much pressure to avoid damaging the keys or the internal components of the keyboard. Proper cleaning techniques will help maintain the functionality and longevity of the keyboard.
Learn more about keyboard: https://brainly.com/question/24921064
#SPJ4
some mobile printers have a built-in wireless port through which they communicate with a computer wirelessly.
The claim is accurate; certain mobile printers are equipped with a wireless connector that allows for wireless communication with a PC.
A wireless port is what?Bluetooth Port a net port that has set up to link a wifi to the wired network at the university. Wireless ports are readily separated from regular network ports by an attached yellow warning label and offer both electricity and data service to wireless access point.
Why is the WAN port used?To attach to an online platform, such as a network extender, a WAN connector is utilized. The router's ability to use the internet and communicate this connect with all the Ethernet-capable devices that are connected to it is made possible by the WAN.
To know more about Wireless port visit :
https://brainly.com/question/28311232
#SPJ4
how to use excel compxm
Open Excel, enter data into cells, create formulas, use functions to calculate data, analyze data with charts and graphs, and save the file.
To use Excel, open the program and create a new workbook. Enter data into cells by typing in the cells or by copying and pasting data from other sources. Create formulas to perform calculations on the data. Use functions to make complex calculations, such as SUM, AVERAGE, MIN, MAX, and COUNT. Use the data to create charts and graphs to help visualize trends and patterns in the data. Finally, save the file in the appropriate format (.xlsx or .xls). Excel is a powerful tool for organizing, analyzing, and presenting data. It can be used for a wide variety of tasks including budgeting, accounting, data analysis, and more. Excel can help you save time, make informed decisions, and create beautiful visualizations.
Learn more about data here-
brainly.com/question/11941925
#SPJ4
you have backup data that needs to be stored for at least six months. this data is not supposed to be accessed frequently, but needs to be available immediately when needed. you also want to reduce your storage costs. which oracle cloud infrastructure (oci) object storage tier can be used to meet these requirements?
To address these needs, an auto-tiering Oracle cloud infrastructure (oci) object storage tier can be used.
What is auto tiering in OCI?When you enable Auto Tiering at the bucket level, OCI will automatically begin monitoring the consumption patterns of each item within the bucket. You don't need to develop sophisticated OLM policies, understand object access patterns, or manually shift things inside a bucket if you enable Auto Tiering.
Which Object Storage tier would you utilize for data that you need to access fast and frequently?The Standard tier is the primary, default storage tier for Object Storage service data. The Standard storage tier "hot" storage is used for data that needs to be accessed fast, instantly, and frequently.
To know more about auto-tiering Oracle visit :-
https://brainly.com/question/6647759
#SPJ4
what will be the output – db.posts.find( { likes : { $gt : 200 }, likes : { $lt : 400 } } );
The aggregation operator for MongoDB's equivalent of the WHERE and HAVING conditions is $match.
The single document that meets the specified criteria is modified and returned by the find And Modify() function. This method often returns a document that hasn't been modified. Use the new option and set its value to "return the document with the updates made" to retrieve the document with the updates. true The user's current working directory is displayed by pwd. While ls by itself lists the current working directory, ls [path] publishes a listing of a particular file or directory. The command "cd" changes the working directory to [path]. When a field's value is equal to a predetermined value, documents containing that information are matched using the equality operator ($eq).
Learn more about function here-
https://brainly.com/question/28939774
#SPJ4
how do you change the sign of an integer stored in 2's complement form? as an example, the 8-bit representation for the value 19 is 00010011. what is the 2's complement representation for -19? show all work.
The 2's complement representation for -19 is:
11101101.
The 2's complement representation is a method of representing negative numbers in binary. It is a widely used representation in computer systems for efficient storage and manipulation of signed integers.
To change the sign of an integer stored in 2's complement form, you can use the following steps:
Invert the bits of the binary representation of the number (change 1s to 0s and 0s to 1s).Add 1 to the result from step 1.Applying these steps to the 8-bit representation for the value 19 (00100011):
Invert the bits: 11101100Add 1: 11101101Therefore, the 2's complement representation for -19 is 11101101.
To know more about 2's complement representation, click on the link below:
brainly.com/question/14529123
#SPJ4
the main difference between the implementation of segmentation and paging is a. the sizes of segments are varied and the sizes of pages are the same b. the sizes of segments are the same and the sizes of pages are varied c. the segmentation uses fifo replacement algorithm while paging uses lru replacement algorithm d. the segmentation uses associative memory while paging uses main memory
The size of segments varies whereas page widths remain constant, which is the primary distinction between segmentation and paging implementations.
What distinguishes segmentation from paging the most?Paging divides a process address space into units called pages. In the case of segmentation, a process address space is divided into units called sections. Blocks of a defined size make up the pages.
What distinguishes a page from a memory segment?Paging and segmentation are both non-contiguous memory allocation strategies, to sum up. A process can be saved in memory in a non-contiguous manner thanks to paging. The process is split into variable-size segments that are loaded into the logical memory address space, however, by segmentation.
To know more about segmentation visit:-
https://brainly.com/question/12996546
#SPJ4
what is 2 and a half % of 740 (Gross Pay)
Find out how many hours were actually worked. Subtract the hourly rate from the total number of hours worked. The gross compensation for that pay period is calculated by adding the regular wage and overtime pay.
What does actually putting in hours at a job entail?
The total number of hours worked comprises regular work hours for full-time, part-time, and part-year employees as well as hours at extra jobs and overtime, both compensated and uncompensated. They do not include time lost due to statutory holidays, paid annual leave, personal diseases, mishaps, or temporary disabilities, parental leave, maternity leave, or absences for reasons relating to education, though. An average full-time worker in the United States puts in 40 hours per week, or eight hours per day, five days per week.
Know more about compensation visit;
https://brainly.com/question/24152521
#SPJ1
18.5 is 2 and a half % of 740 (Gross Pay).
How is gross compensation determined?An hourly worker's gross compensation is determined by multiplying their hourly rate by the total number of hours worked. Then include any additional sources of income that are relevant, such as commissions, tips, and overtime compensation.Join right now. Before taxes, benefits, and other payroll deductions are taken out of an employee's paycheck, that amount is known as their gross pay. Net pay, often known as take-home pay, is the amount that is left after all withholdings have been taken into account.Gross income is the total of all incomes, salaries, profits, interest payments, rents, and other kinds of income for families and people before any deductions or taxes.To learn more about Gross Pay refer to:
https://brainly.com/question/11274742
#SPJ1
if you want to select records containing the text consulting in the project type field, how does access save the criterion in the query grid of query design view?
Open the Design view for your query. Click the Criteria row of the field where you wish to put the criterion in the query design grid. Enter the criteria after adding them.
To view the outcomes, select Run. the datasheet. Click Home > Advanced > Advanced Filter/Sort after applying the filters. All the filters you've used are included in the query Access generates. After giving the query a name, click Save. The grid that you use to create a query or filter in the Advanced Filter/Sort window or in the Query Design view. This grid was traditionally referred to as the QBE grid for inquiries.
To know more about the datasheet on the link below:
https://brainly.com/question/29997499
#SPJ4
packages installed in rstudio are called from cran. cran is an online archive with r packages and other r-related resources. 1 point true false
Cran makes calls to the packages that are set up in Rstudio. It is true that cran is an online repository for R packages and other resources connected to the language.
What in R are CRAN packages?It contains documentation, donated R packages, and archives for both the most recent and prior iterations of the R distribution. For Windows and macOS, it provides pre-compiled binaries and source packages. There are about 16,000 different bundle options available.The RStudio integrated development environment is compatible with the R version that is made available through CRAN. RStudio is compatible with all of the main systems and provides a number of tools that boost productivity.CRAN is the source of calls to the packages installed in RStudio. CRAN is a digital library that houses R packages and other materials. CRAN is the source of calls to the packages installed in RStudio.To learn more about R Packages refer to:
https://brainly.com/question/29603670
#SPJ4
what do you enter at the command prompt that will, by default, switch you to the root user and require you to enter the root password?
You can enter "sudo su" at the command prompt to switch to the root user and enter the root password.
"sudo" is a Linux command that allows you to run a command as the superuser or another user.
The "su" command, on the other hand, stands for "switch user" and is used to switch to a different user account.
When you run "sudo su", you are telling the system to temporarily escalate your privileges to those of the root user so that you can perform administrative tasks. You will then be prompted to enter the password for the root user. Once you have entered the password, you will be able to run commands with root privileges.
"sudo su" should be used with caution as the root user has complete control over the system. Running commands with root privileges can potentially cause harm to your system if done incorrectly. Therefore, it's recommended to use "sudo" before each specific command that requires elevated privileges, rather than using "sudo su" to switch to the root user.
Note: Regular tasks should be performed with a regular user account. This helps to increase the security of your system and reduce the risk of accidental damage to your system.
To learn more about root user, use the link:
brainly.com/question/29222522
#SPJ4
which phase of compiler does not use symbol table?
a) Code generation. b)Syntax analysis. c) Lexical analysis. d)None of the other options
Code generation is the phase of a compiler that produces the machine code output from the intermediate code. It does not use a symbol table as it is not involved in the analysis or checking of code.
Code generation is the phase of a compiler that produces the machine code output from the intermediate code. It is the last phase of compilation and is preceded by the optimization and code generation phases. This phase takes the optimized intermediate code, usually in the form of three-address code, and produces the target machine code. The machine code is the actual instructions that the processor can execute and it is the output of the compiler. Code generation does not use a symbol table as it is not involved in the analysis or checking of code. The symbol table is used during the analysis and optimization phases, so it is not necessary for code generation. During this phase the compiler needs to determine the target machine instructions for each intermediate code instruction. It does this by consulting a target machine instruction set, which is a list of all the instructions supported by the target processor. It then needs to determine the target machine registers, memory locations and constants used by the instructions.
Learn more about code here:
https://brainly.com/question/25774782
#SPJ4
If a programmer confuses the method required for checking the length of a string and uses size() instead of length(), what will happen?
Group of answer choices
The program will not compile.
The compiler will automatically correct the error.
The program will crash.
The program will run but will produce an uncertain result.
If a programmer confuses the method required for checking the length of a string and uses size() instead of length(), then the program will not compile. Java provides a length property and a size() function.
Because they sound fairly similar, a novice might assume that these are interchangeable and fulfill the same function. Size and length are two distinct concepts in Java.
The capacity of arrays is contained in the field.length, NOT the current element count of the array. With Strings, capacity and number of contained elements (chars) share the same value. The function length() is utilized by Strings among others, and it returns the number of characters in the String.
All members of the Collection implement the function size() (lists, sets, stacks,...). The number of elements in the collection is returned, not it's capacity (some collections don't even have a stated capacity).
To learn more about Java click here:
brainly.com/question/13261090
#SPJ4
what categories (or person prototypes) would you use to classify the various groups in your school
Rapid prototyping (Throwaway). evolutionarily inspired design. progressive prototyping. radical prototyping
The object or member of a class that is most frequently linked to that class is the prototype of a category in layman's terms. The prototype is at the heart of the class, and every other student moves outward from it as they go, creating a gradation of categories. Throwable or non-throwable prototypes are both acceptable. Both have advantages of their own. A non-throwable type is one that can be improved to produce the final product, while a throwable type is done only to gain a concept of the result.
Learn more about rapid here-
https://brainly.com/question/1059284
#SPJ4
What is a good, free to use, and non coding program or app that you can use to develop a video game on a Chromebook?
I want to make my own, but it's hard to find anything that is good, and free with no coding.
A good, free-to-use, and noncoding program or app that you can use to develop a video game on a Chromebook is Construct 3. Sparckman.
What is a non-coding program?A style of web development called "no-code" enables both programmers and non-programmers to build software without writing any code by using a graphical user interface.
The underlying tenet of the no-code movement is that technology should encourage invention, not serve as a barrier to it.
Therefore, Construct 3 by Sparkman is a decent, no-cost, non-coding application or app you may use to create a video game on a Chromebook.
To learn more about the non-coding program, visit here:
https://brainly.com/question/15077971
#SPJ1
Which of the following is NOT true? Mapping a binary M:N relationship will result in: Two foreign keys. O A new relation O A foreign key in both of the relations mapped from the involved entities O The number of tables in the mapped relational schema exceeding the number of entities in the ERD O A composite primary key
The number of entities in the ERD is not a result of m:n relationship.
Mapping a binary M:N relationship will not result in the number of tables in the mapped relational schema exceeding the number of entities in the ERD.
M:n relationships is to separate the two entities and create two one-to-many (1:n) relationships between them with a third intersect entity.
An ERD entity is a definable thing or concept within a system.
Entity Relationship Diagram, also known as ERD, ER Diagram or ER model.
There are three types of entities in the ERD .The major entities within the system scope, and the inter-relationships among these entities.
Learn more about m:n relationship here:-
brainly.com/question/14971982
#SPJ4
what network protocol would be used on a basic network
The Transmission Control Protocol/Internet Protocol (TCP/IP) is the most popular network protocol used on a fundamental network. Different sorts of devices can communicate via a network thanks to this protocol, which serves as the communication infrastructure.
Communication between many kinds of devices via a network is made possible by a collection of protocols called TCP/IP, or Transmission Control Protocol/Internet Protocol. The guidelines and formats for the data that must be communicated over the network are specified. It offers a trustworthy, effective method of transferring data between gadgets and guarantees that the data is received in the same format as it was delivered. TCP/IP provides the infrastructure required to enable communication between various computers and networks at the Internet layer of the Internet Protocol Suite. On today's networks, including local area networks and the Internet, it is the most extensively used network protocol. It is crucial for the effective functioning of networks as it forms the basis of communication.
Learn more about network here:
brainly.com/question/29970297
#SPJ4
why do you have to return numbers from a function rather then print it in the function?
That printing is useless to the computer. The way a function returns a value is through return. The computer can make use of this value even though it is frequently invisible to a human user.
Returning control to the caller function puts an end to the execution of a function. At the instant after the call, execution picks back up in the caller function. The calling function may get a value from a return statement. Go to Return type for more details. The return statement in Python is a crucial part of functions and methods. Your functions can return Python objects to the calling code by using the return statement. The return value of the function refers to these items.
Learn more about computer here-
https://brainly.com/question/28249937
#SPJ4
explain what information sources are used for the data and documentation that they use in their work activities
An information source is a source of knowledge for someone, meaning it can be anything that can educate someone on a topic.
Information can come from a variety of sources, including observations, speeches, records, images, and organizations. Sources of data or proof are frequently divided into primary, secondary, or tertiary categories. These divisions are based on the degree of originality and proximity to the source or origin of the information. Original works are considered primary sources, studies of those original works are considered secondary sources, and collections of secondary source data are considered tertiary sources. Professionals in academia, science, and business employ a combination of all three sorts of sources.
Learn more about information here-
https://brainly.com/question/16759822
#SPJ4
which code would you use to compute the standard deviation of the values stored in the one-dimensional array data?
The standard deviation of the values in the one-dimensional array data using the math.sqrt(np.var(DATA)) code.
What in Python is STD ()?Utilize numpy in Python to determine an array's standard deviation. the function std() The square root of the average of the squared deviations from the mean is the standard deviation. It is calculated for the flattened array by default, but axis param can change this.
In Python, how can you determine the standard deviation of grouped data?The stdev() and pstdev() functions in the Python statistics module can be used to calculate a sample dataset's standard deviation. Python's pstdev() function calculates the population standard deviation, whereas Python's stdev() function only calculates the sample standard deviation.
To know more about array visit :-
https://brainly.com/question/13107940
#SPJ4
write a program in plp assembly that repeatedly reads the value of the switches (address: 0xf0100000) and displays a pattern on the led array based on what switches.
Tower hardware for tangent suspension, angle, and dead-end assemblies is available as part of PLP String Assemblies. By rated voltage levels, conductor counts, and general assembly type, the assemblies are arranged.
How does PLP software work?The PLP Board's use of the Progressive Learning Platform (PLP) offers a special learning environment that is intended to be straightforward, accessible, and practical for instruction. Developers of the Progressive Learning Platform System on a Chip can use this text as a thorough manual (SoC).
PLP define B e q:
If the values in the two registers are equal, the b eq instruction will start executing instructions at the designated label. If the values of the two registers do not match, the b ne instruction will start executing instructions at the designated label.
To learn more about PLP String Assemblies refers to;
https://brainly.com/question/30437200
#SPJ4
