50 POINTS!!!! What is the approximate amount of the leftover reactant?
O 8.2 g of sulfuric acid
O 9.8 g of sulfuric acid
0 11.43 g of aluminum hydroxide
O 13.76 g of aluminum hydroxide

Answer:

The correct choice is option b. ethanol < Mg(NO3)2 < NaCl

Explanation:

Ethanol = 0.100 m

Mg(NO3)2 = 0.15 m

NaCl = 0.18 m

The molar concentration of NaCl is the highest, which is why its boiling point will be the highest, too.

Answer:

B. Light waves or energy

Explanation:

Einstein argued that gravity isn't a force at all. He described it as a curvature of time and space caused by mass and energy.

Mass is a measure of inertia

The variable that affect mass of a body is the amount of matter present in the body

The reason for arriving at the above statement is as follows:

Mass is the property of a body that indicates the quantity of matter contained in the body and also a measure of the body's resistance to acceleration

In an experiment to determine the variables that affect mass, using a weight balance and paper clips, the observation is that as the quantity of the paper clips are increases on one side of the balance, the balance tilts lower on the side bearing the larger number of paper clips indicating a larger mass

Therefore, the variable that affect mass is the quantity of matter (material) present

Learn more about matter here:

https://brainly.com/question/22503269

Answer:

Helium

Explanation:

The element that does not have the same number of electrons in its outermost shell as the other elements in its group is helium. The correct option is C.

Helium is a gas and the second element of the periodic table. It has an atomic number of 2. It is a colorless, odorless, and non-toxic gas. Furthermore, it is the lightest gas, and it is used in filling in the tires of airplanes and balloons.

The group in which helium is present in group 18. It contains 6 elements. Helium is the first element. All element in the periodic table has eight electrons in their last shell. But only helium has 2 electrons in its outer valence. So, helium is different from other elements present in its group.

Thus, the correct option is C. helium (He).

To learn more about helium, refer to the link:

https://brainly.com/question/11993868

#SPJ6

Answer:

2.2309

Explanation:

Density=Mass÷Volume

Volume=mass÷Volume

             =23.210÷11.3

             =2.2309

Answer:

(from largest to smallest), macroscopic, microscopic, submicroscopic.

Explanation:

Explanation:

The correct order of these from largest to smallest is macroscopic, microscopic, and submicroscopic.

Macroscopic is a term used for things that can be easily seen by the eyes. They are of large size. Macroscopic are those items like rubber, mountains, a bottle, etc.

Microscopic items are those items that are minimum in size and can not be seen by eyes. They are seen by using microscopes. They are microorganisms, cells, cell organelle, etc.

Submicroscopic matters are those objects or substances that made up matter. They are present but can not be seen by eyes. They are electrons, protons, etc. so the correct order of them according to largest to smallest is macroscopic, microscopic, and submicroscopic.

Thus, the correct order is macroscopic, microscopic, and submicroscopic.

To learn more about macroscopic, refer to the link:

https://brainly.com/question/17329685

#SPJ2

Explanation:

First write down the basic chemical equation with the reactants and products,

[tex]\text{P}_4+\text{ Cl}_2\to\text{ PCl}_3[/tex]

Balancing the chemical equation*,

[tex]\text{P}_4 (s) + 6 \text{Cl}_2 (g) \to 4 \text{PCl}_3 (l)[/tex]

[tex]\color{blue}\text{Note: To balance any chemical equations, we should ensure the number of atoms of each elements are the same on both the product and reactant side.}[/tex]

[tex]\color{blue}\text{The phosphorous molecule has 4 P, but the }\text{PCl}_3\text{ molecule on the product side only has one P atom. Therefore, we need 4 }\text{PCl}_3\text{ molecules to balance.}[/tex]

[tex]\color{blue}\text{But that will mean we have }4\cdot 3=12\text{Cl atoms on the product side. So we need 6 }\text{Cl}_2 \text{ molecules on the reactant side.} [/tex]

Answer:

weight is the measure of force put onto an object

like if you put a heavier object on something elastic, it would go lower because weight creates force and friction

Answer:

How would you set this up?

Explanation:

It's in the last paragraph of this website.

https://community.ptc.com/t5/PTC-Mathcad/AP-Chemistry-Problem-Help/td-p/64410

The bubbling that occurs when the methanol is added to the dry sand indicate that there is no chemical reaction between  sand and methanol rather it is just methanol displacing air between sand .

Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical reaction,here:

https://brainly.com/question/14929452

#SPJ2

The mass of 125 mL of bromine and the volume occupied by 85 g of bromine are:  

Density is simply defined as the mass of an object per unit volume of the object. It can be expressed mathematically as

[tex]Density = \frac{mass}{volume }[/tex]

Density = 3.12 g/mL

Volume = 125 mL

[tex]Density = \frac{mass}{volume} \\\\3.12 = \frac{mass}{125}[/tex]

Cross multiply

Mass = 3.12 × 125

Therefore, the mass of bromine is 390 g

Density = 3.12 g/mL

Mass = 85 g

[tex]Density = \frac{mass}{volume } \\\\3.12 = \frac{85}{volume }[/tex]

Cross multiply

3.12 × Volume = 85

Divide both side by 3.12

[tex]Volume = \frac{85}{3.12}\\\\[/tex]

Therefore, the Volume of bromine is 27.24 mL

Learn more: https://brainly.com/question/24460125

A mixture can be separated by looking at the physical properties of the components of the mixture.

Since salt is soluble in water, water can be added to the mixture to dissolve the salt.

The bar magnet is now introduced in order to remove the iron filings since they are attracted by a magnet.

The solution is filtered to separate the sand from the salt solution.

Lastly, the salt solution is heated to dryness to drive away the water and obtain the solid salt.

Hence the mixture has been separated into its components using their individual physical properties. Option A is the correct answer.

Learn more: https://brainly.com/question/12160179

Answer:

is it a b c or d

Explanation:

The relative standard deviation for the set of data obtained by the student is 0.470%

The formula for calculating the relative standard deviation is given below as:

Relative standard deviation (RSD) = (S * 100)/x

where S stands for the standard deviation and x is the mean of the data set.

The following are the steps to calculate to determine the relative standard deviation using the given formula:

Step 1: Calculate the mean of the numbers in the data set.

mean, x = sum of numbers / number of numbers

(40.220 + 40.654 + 40.314 + 40.165 + 40.554)/5

mean = 40.381 g/mol

Step 2: Subtract the mean from each number in the data to determine the deviation for each number and then square the deviations.

(40.220 - 40.381)² = 0.0259

(40.654 - 40.381)² = 0.0745

(40.314 - 40.381)² = 0.00449

(40.165 - 40.381)² = 0.0466

(40.554 -40.381)² = 0.0299

Step 3: Sum the squared deviations.

0.0259 + 0.0745 + 0.00449 + 0.0466 + 0.0299 = 0.181

Step 4: Determine the variance by dividing the sum of the squared deviations by the total number of values.

Variance = 0.181/5 = 0.0362

Step 6: Determine the standard deviation of the data by taking square root of the variance.

Standard deviation, S = √0.0362 = 0.190

Step 7: Determine the relative standard deviation by inserting the values in the formula, (RSD) = (S * 100)/x

RSD = (0.190 * 100)/40.381

RSD = 0.470%

Learn more at: https://brainly.com/question/475676

Answer:

yes it is dangerous

Explanation:

Water reactive substances are dangerous when wet because they undergo a chemical reaction with water.

Answer:

To determine how many total electrons there are, add the amount of charge to the atomic number

Explanation:

For example, N3- has a -3 charge which means it has 3 more electrons than a neutral nitrogen atom. Nitrogen's atomic number is 7, therefore this ion has 10 electrons.

Answer:

the given equation is

Fe2o3+co-- Fe+co2

Balanced chemical equation is

Fe2o3 + 3co-- 2Fe+3co2

Answer:

B

Explanation:

Please give brainliest

Answer:

Chelate, any of a class of coordination or complex compounds consisting of a central metal atom attached to a large molecule, called a ligand, in a cyclic or ring structure. An example of a chelate ring occurs in the ethylenediamine-cadmium complex:

The ethylenediamine ligand has two points of attachment to the cadmium ion, thus forming a ring; it is known as a didentate ligand. (Three ethylenediamine ligands can attach to the Cd2+ ion, each one forming a ring as depicted above.) Ligands that can attach to the same metal ion at two or more points are known as polydentate ligands. All polydentate ligands are chelating agents.

Chelates are more stable than nonchelated compounds of comparable composition, and the more extensive the chelation—that is, the larger the number of ring closures to a metal atom—the more stable the compound. This phenomenon is called the chelate effect; it is generally attributed to an increase in the thermodynamic quantity called entropy that accompanies chelation. The stability of a chelate is also related to the number of atoms in the chelate ring. In general, chelates containing five- or six-membered rings are more stable than chelates with four-, seven-, or eight-membered rings.

Explanation:

Answer:

4

Explanation:

Answer:

A) 14,500 kPa

B)  6 atm

C)  23.443 atm

D)  898.6  mmHg

Explanation:

Fluoridation is the process of adding fluorine to drinking water to avoid tooth decay.

The question is incomplete; the complete question is;

Fluoridation is the process of adding fluorine compounds to drinking water to help fight tooth decay. A concentration of 1 ppm of fluorine is sufficient for the purpose. (1 ppm means one part per million, or 1 g of fluorine per 1 million g of water.) The compound normally chosen for fluoridation is sodium fluoride, which is also added to some toothpastes. Calculate the quantity of sodium fluoride in kilograms needed per year for a city of 50,000 people if the daily consumption of water per person is 150 gallons.

(Sodium fluoride is 45.0 percent fluorine by mass. 1 gallon = 3.79 L; 1 year = 365 days; 1 ton = 2000 lb; I lb = 453.6 g; density of water = 1.0 g/mL.)

The quantity of sodium fluoride in kilograms needed per year for a city of 50,000 people if the daily consumption of water per person is 150 gallons is [tex]9.32 * 10^9 Kg[/tex].

From the question, we know that;

Daily consumption of water per person = 150 gallons.

Population of the city = 100,000 people

Total daily city consumption =[tex]100,000 *  150 gallons = 15 * 10^6 gallons[/tex]

Annual water consumption = [tex]15 * 10^6 gallons * 365 = 5.475 * 10^9 gallons[/tex]

1 gallon = 3.785 L = 3.785 kg

[tex]5.475 * 10^9 gallons = 5.475 * 10^9 gallons * 3.785 kg/ 1 gallon = 2.1 * 10^10 Kg[/tex]

Since sodium fluoride accounts for 45% by mass of water

Mass of sodium fluoride= [tex]0.45 * 2.1 * 10^10 Kg= 9.32 * 10^9 Kg[/tex]

Learn more; https://brainly.com/question/14805580

Answer:

0.18m

0.075L

Explanation:

1m = 100cm

18cm = 18/100 = 0.18m

1L = 1000mL

75mL = 75/1000 = 0.075L

If my answer is incorrect, pls correct me!

If you like my answer and explanation, mark me as brainliest!

-Chetan K

The correct measurements has an uncertainty of ±0.01.

The metric system of measurement is a system of measurement that makes use of the meter, litre and gram as units. With every measurement, there is a level of uncertainty.

The uncertainly that goes with each measurement usually lies between ±0.01. Hence the correct measurements has an uncertainty of ±0.01.

Learn more about metric system: https://brainly.com/question/25966695

We want to perform some changes of units, such that the number of significant figures (the ones different than zero) does not change.

a) 75 cm to ft

We know that:

1ft = 30.48cm

1 = (1ft)/(30.48cm)

Now, remember that if we multiply a quantity by one we do not affect the quantity, so we can write:

75cm = 75cm*(1ft)/(30.48cm) = 2.5 ft

b)  0.668 kg to lb

we know that:

1kg = 2.20462 lb

then:

1 = (2.20462 lb)/(1kg)

0.668 kg = 0.668 kg*(2.20462 lb)/(1kg) = 1.47 lb

c)  0.549 uL to qt

We know that:

1 uL = 3.437*10^-9 qt

1 = (3.437*10^-9 qt)/(1 uL)

Then:

0.549 uL = 0.549 uL*(3.437*10^-9 qt)/(1 uL) = 1.91*10^-9 qt

d) 9.991 mm to km

we know that:

1mm = 1*10^-6 km

then:

1 = (1*10^-6 km)/(1mm)

So we can rewrite:

9.991 mm = 9.991 mm*(1*10^-6 km)/(1mm) = 9.991*10^-6 km

e)  313 nm to mm

We have:

1nm = 1*10^-6 mm

1 = ( 1*10^-6 mm)/(1 nm)

Then:

313 nm*( 1*10^-6 mm)/(1 nm) = 3.13*10^-4 mm

If you want to learn more, you can read:

https://brainly.com/question/24606249

Answer:

Energy, Kinetic, Potential

Explanation:

Kinetic and Potential is energy

Kinetic is energy in motion and Potential is stored motion.