F-1 would have a larger radius because it has one less electron than F, reducing the electrostatic attraction between the nucleus and electrons, making the atom larger.
The radius of an atom is determined by the distance between the nucleus and the outermost electron shell. The number of electrons in the outermost shell, or valence electrons, determines the size of the atom. In this case, F has 9 electrons in its outermost shell, while F-1 has 8 electrons. With one fewer electron, F-1 has less electrostatic attraction between the nucleus and electrons, and thus a larger radius.Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. The number of valence electrons an atom has determines its reactivity and how it will bond with other atoms
Learn more about valence electrons here:
https://brainly.com/question/1255220
#SPJ4
what should you do if you spill sulfuric acid on your hand?
Immediately rinse the affected area with copious amounts of water, then remove any contaminated clothing or jewelry and continue flushing the skin with water for at least 20 minutes. Seek medical attention right away, even if you don't feel any pain or visible skin damage.
Sulfuric acid is a highly corrosive substance that can cause severe burns and tissue damage. It reacts strongly with water, releasing heat and potentially producing hazardous fumes. The prompt and thorough removal of the acid from the skin is critical to minimize the extent of the injury and prevent further damage.
In case of eye exposure, flush the eye with water for at least 20 minutes, remove contact lenses if applicable, and seek medical attention. It is important to wear appropriate personal protective equipment when handling sulfuric acids, such as gloves, eye protection, and a lab coat, and to follow safe handling procedures to prevent accidents.
Learn more about Sulfuric acid
brainly.com/question/10220770
#SPJ4
Give the ratio in which hydrogen and oxygen are present in water by volume.
(a) 1:2
(b) 1:1
(c) 2:1
(d) 1:8
The ratio of the hydrogen and oxygen present in water by volume is 2:1
Ratio of hydrogen to oxygen in water?The ratio of hydrogen to oxygen in water is 2:1. This means that for every two hydrogen atoms in a water molecule, there is one oxygen atom. The chemical formula for water is H2O, which indicates that each water molecule contains two hydrogen atoms and one oxygen atom.
This ratio is essential to the chemical properties of water, including its ability to form hydrogen bonds, dissolve many substances, and participate in a wide range of chemical reactions.
Learn more about water:https://brainly.com/question/28465561
#SPJ1
if a demineralizer bed reaches a point that the demineralizer resin can no longer hold any more ions, the bed is said to be
If a demineralizer bed reaches a point where the demineralizer resin can no longer hold any more ions, the bed is said to be exhausted.
Demineralizer beds are used in water treatment to remove dissolved minerals (e.g., calcium, magnesium, and iron) and other ionic impurities from water. Demineralizer beds typically consist of ions exchange resin beads that are packed into a column or tank. The resin beads have an affinity for certain ions (e.g., calcium and magnesium) and will exchange these ions for other ions (e.g., hydrogen or sodium) in the water. Over time, as the resin beads become saturated with exchanged ions, the capacity of the bed to remove further ions decreases.
When the resin becomes saturated and can no longer remove any more ions, the bed is considered to be exhausted. At this point, the resin must be regenerated or replaced in order to restore the demineralizer bed to its original capacity. The regeneration process involves washing the bed with a solution that displaces the exchanged ions and replaces them with fresh exchange ions. Once the regeneration process is complete, the demineralizer bed is ready to be used again to remove ions from the water.
learn more about exhausted here:
https://brainly.com/question/29848887
#SPJ4
how many liters of Hn3 are needed to react completely with 30.0L of NO?
The volume of NH3 needed to completely react with 30.0 L of NO would be 20.0 L.
Stoichiometric problemNH3 and NO react to produce nitrogen and water according to the following chemical equation:
[tex]4NH_3 + 6NO -- > 5N_2 + 6H_2O[/tex]
From the equation, the mole ratio of NH3 and NO is 2:3. Thus, every 1 mole of NH3 will require 1.5 moles of NO for a complete reaction.
The equivalent volume of NH3 that will react completely with 30.0 L of NO will be:
2/3 x 30 = 20.0 L
In other words, the volume of NH3 needed to react completely with 30.0 L of NO is 20.0 L.
More on stoichiometric calculations can be found here: https://brainly.com/question/29841194
#SPJ1
Given the particulate model which depicts the mechanism for the decomposition of NO2, answer the following questions.What is the chemical formula for the intermediate? Write a balanced equation for the overall chemical reaction. Do not add states of matter.
{2 NO2 ->[\Delta] 2NO + O2} This reaction is an exothermic reaction and occurs in an Oxidation-Reduction Reaction and balanced equation for the overall chemical reaction
Overview of NO2 Decomposition The decomposition of nitrogen dioxide (NO2) is a complex chemical reaction that involves a series of intermediate steps. In its most basic form, the overall reaction can be described as NO2 reacting with oxygen to form nitrogen monoxide (NO) and oxygen (O2). The particulate model of this reaction shows the detailed steps involved in the reaction. Intermediate Steps The particulate model of the NO2 decomposition process begins with NO2 reacting with oxygen to form nitrogen monoxide (NO) and oxygen (O2). This is a two-step reaction, with the first step being the formation of nitrogen dioxide (NO2) and oxygen (O2) as intermediate products:
{2 NO2 <=>[\Delta] NO2 + O2}
The second step is the reaction of the nitrogen dioxide (NO2) and oxygen (O2) to form nitrogen monoxide (NO) and oxygen (O2):
{2 NO2 + O2 ->[\Delta] 2NO + O2}
Balanced Equation The overall chemical reaction for the decomposition of NO2 can be expressed as a balanced equation:
{2 NO2 ->[\Delta] 2NO + O2} The reaction is an exothermic reaction and produces heat. This is an example of an Oxidation-Reduction Reaction, as the nitrogen dioxide (NO2) is oxidized to form the nitrogen monoxide (NO), while the oxygen (O2) is reduced to form oxygen (O2).
The decomposition of NO2 is a complex chemical reaction that involves a series of intermediate steps. The particulate model of the reaction shows the detailed steps involved in the reaction, starting with the formation of nitrogen dioxide (NO2) and oxygen (O2) as intermediate products, and then the reaction of the nitrogen dioxide (NO2) and oxygen (O2) to form nitrogen monoxide (NO) and oxygen (O2). The overall chemical reaction for the decomposition of NO2 can be expressed as a balanced equation. This reaction is an exothermic reaction and occurs in an Oxidation-Reduction Reaction
To know more about Oxidation-Reduction Reaction click here:
brainly.com/question/13559667
#SPJ4
What is the area of science that studies tiny particles like atoms?
Quantum mechanics is the study of atoms and incredibly tiny particles that are even smaller.
In quantum mechanics, another branch of physics, atomic and subatomic particles are investigated. The primary field of science that deals with the study of atoms and molecules is chemistry. By utilizing their knowledge of atoms, chemists create molecules that resemble drugs. A distinction is established between atomic physics, which studies the atom as a system made up of a nucleus and electrons, and nuclear physics, which explores nuclear reactions and special properties of atomic nuclei. Three subatomic particles make up matter: protons, neutrons, and electrons. The only subatomic particles that have electrical charges are protons and electrons, with protons having a positive charge and electrons having a negative charge.
Learn more about quantum mechanics here:
brainly.com/question/11855107
#SPJ4
an igneous rock has quartz in it. based on bowen's reaction series only, which two compositional categories can you rule out for sure? mafic felsic intermediate ultramafic
The two compositional groups that can be ruled out for an igneous rock that contains quartz are mafic and ultramafic based on Bowen's reaction series, which defines the order of mineral crystallisation during the cooling of magma.
A geological principle known as Bowen's reaction series explains the sequence in which minerals form from cooling magma. In the early 1900s, Canadian geologist Norman Bowen made the initial suggestion. The theory describes how different minerals develop at various temperatures when lava cools. Higher temperature minerals begin to develop first, followed by minerals that crystallise at lower temperatures. Understanding the content and texture of igneous rocks requires an understanding of the order in which minerals crystallise. Bowen's reaction series is used to analyse the geological history of a region and anticipate the kinds of minerals and rocks that would occur under certain cooling circumstances.
Learn more about Bowen's reaction here:
https://brainly.com/question/13431170
#SPJ4
Which compositional groups of igneous rocks can be excluded based on the presence of quartz in the rock, and what is the scientific basis for this exclusion?
a chemist plans to use 435.0 grams of ammonium nitrate in a reaction. how many moles of the compound is this?
435.0 grams of ammonium nitrate is equivalent to 5.436 moles of the compound.To determine how many moles of ammonium nitrate are in 435.0 grams of the compound, we need to first determine the molar mass of ammonium nitrate and then use that value to convert grams to moles.
The molecular formula of ammonium nitrate is NH4NO3, which consists of one nitrogen atom, four hydrogen atoms, one oxygen atom, and three nitrogen atoms. To calculate the molar mass of NH4NO3, we can add up the atomic masses of each of these elements, taking into account the number of atoms of each element in the molecule.
The atomic masses are: nitrogen (N) = 14.01 g/mol, hydrogen (H) = 1.008 g/mol, and oxygen (O) = 16.00 g/mol.
Molar mass of NH4NO3 = (1 x 14.01 g/mol) + (4 x 1.008 g/mol) + (3 x 16.00 g/mol)
Molar mass of NH4NO3 = 80.04 g/mol
To convert 435.0 grams of NH4NO3 to moles, we can use the formula:
moles = mass (in grams) / molar mass
moles of NH4NO3 = 435.0 g / 80.04 g/mol
moles of NH4NO3 = 5.436 mol
Therefore, 435.0 grams of ammonium nitrate is equivalent to 5.436 moles of the compound.
Find out more about ammonium nitrate
brainly.com/question/10197458
#SPJ4
which of the following best describes a functional group? multiple choice question. large molecules comprised of a glycerol and three fatty acid chains special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients molecules that are composed of hydrogen and carbon in a long chain or ring-like structure large molecules composed of two or more repeating smaller units
Option (b) is correct. Functional group describes a special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients.
Functional groups are classified as any of numerous combinations of atoms that form parts of chemical molecules that undergo characteristic reactions themselves. In many cases it influence the reactivity of the remainder of each molecule. The concept of functional groups is useful as a basis for classification of large numbers of compounds according to their reactions. Some examples of the common functional groups are hydroxyl present in alcohols and phenols, carboxyl present in carboxylic acids, carbonyl present in aldehydes, ketones and quinones. In a simple way it is defined as an atom or group of atoms within a molecule that has similar chemical properties whenever it appears in various compounds even if other parts of the molecule are quite different.
To learn more about Functional group please visit:
https://brainly.com/question/27879244
#SPJ4
The complete question is,
which of the following best describes a functional group?
multiple choice question.
(a) large molecules comprised of a glycerol and three fatty acid chains
(b) special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients
(c) molecules that are composed of hydrogen and carbon in a long chain or ring-like structure
(d) large molecules composed of two or more repeating smaller units
calculate the moles of ammonia present in a 2.860 g sample of ammonia, which has a molar mass of 17.030 g/mol.
The moles of ammonia present in a 2.860 g sample of ammonia has a molar mass of 17.030 g/mol. Then, the Number of Moles is 0.2 moles.
Ammonia :
Ammonia is an inorganic compound of nitrogen and hydrogen with the chemical formula NH3. A stable binary hydride and the simplest source of hydrogenation, ammonia is a colorless gas with a distinct, pungent odor. Biologically, it is a common nitrogen waste, especially among aquatic organisms, and contributes significantly to the nutrient needs of terrestrial organisms, serving as a precursor to 45% of the world's food and fertilizers.
Molar Mass:
In chemistry, the molar mass (M) of a compound is defined as the ratio between the mass of a sample of that compound and the amount of the substance (measured in moles). Molar mass is a volumetric, not molecular, property of a substance. Molar mass is the average of many instances of a compound that often differ in mass due to the presence of isotopes. Most commonly, molar mass is calculated from standard atomic weights, so it is global average and is a function of the relative isotopic abundance of Earth's constituent atoms. Molar mass is suitable for converting the mass of a substance and the amount of a substance into a mass quantity.
Now,
Given:
Weight in grams, w = 2.860 g
Molar mass, m = 17.030 g/mol
We know,
Number of Moles = Weight(w) / Mole Mass (m)
⇒ n = 2.860/ 17.030
By substituting the values,
⇒ n = 0.1679
≈ n = 0.2 moles.
Thus, the response above is right.
Learn more about Moles:
https://brainly.com/question/26416088
#SPJ4
which solution has a lower vapor pressure? a 0.4m ch4 solution all four solutions given have the same vapor pressure a 0.4m sucrose solution a 0.2m kno3 solution a 0.2m nacl solution
Comparing the four solutions above, the vapour pressure of a 0.4 M CH4 (methane) solution is lowest. This is due to the fact that a solution's vapour pressure is directly inversely proportional to the mole fraction of the solvent.
When the rate of evaporation and condensation are equal, the pressure that a substance's vapour exerts in a closed container is referred to as vapour pressure. It is an indicator of a substance's propensity to evaporate and is influenced by variables including temperature, surface area, and intermolecular forces. A substance with a higher vapour pressure will evaporate more quickly than a substance with a lower vapour pressure at a given temperature. Chemistry, physics, and material science are just a few of the scientific and engineering disciplines where vapour pressure is an important feature. It has significant effects on how liquids and gases behave, including boiling temperatures, distillation, and phase transitions.
Learn more about vapour pressure here:
https://brainly.com/question/14123284
#SPJ4
1. For a more difficult training session, the mass to be pushed is increased to 300 kg. If the players still produce a net force of 150 N, what is the acceleration of the 300 kg mass?
2. Did the acceleration go up or down with the increased mass to be pushed? Why did that happen?
please help hurry!
Acceleration of the car is the force divided by its mass. The acceleration of the mass of 300 kg with a force of 150 N is 0.5 m/s².
What is acceleration ?Acceleration is a physical quantity measuring the rate of change in velocity. It is a vector quantity having both magnitude and acceleration. Acceleration has the unit of m/s².
According to Newton's second law of motion, the force acting on a body is the product of its mass and acceleration.
F = ma
Given that, mass of the object = 300 kg
force applied = 150 N
acceleration = force/mass
a = 150 N/300 kg = 0.5m/s²
Therefore, the acceleration of the mass is 0.5 m/s². As the mass increases, acceleration of an object decreases. Then, acceleration goes down by increasing the mass.
Find more on acceleration:
brainly.com/question/3046924
#SPJ1
a block of titanium has nv vacancies at 300 k. what happens to the number of vacancies as the temperature increases to 600 k? group of answer choices
The quantity of vacancies grows together with a solid material's temperature. This is due to the fact that at higher temperatures, the material's atoms have greater kinetic energy and are therefore more prone to move around and leave voids behind.
The vacant regions in the crystal lattice of solid materials where atoms are absent from their predicted places are known as vacancies. These vacancies may develop for a number of reasons, including thermal vibrations, lattice contaminants, and external forces on the material. The characteristics of the material may change as a result of the existence of vacancies, such as the electrical conductivity, mechanical strength, or thermal conductivity. Designing and optimising materials for particular uses, such as in electrical devices, aerospace engineering, or nuclear power plants, requires an understanding of the behaviour of vacancies. In materials science and engineering, vacancies are thus a crucial notion.
Learn more about "vacancies," here:
https://brainly.com/question/14989474
#SPJ4
when measuring a melting point for a solid compound, why is it important to slow the rate of heating when approaching the melting point of a substance?
Answer:
Explanation:
It is important to add heat slowly and steadily because when a substance undergoes a phase change, it absorbs much energy until it heats its melting. So, the heat must be provided steadily. Slow heating helps to determine a more accurate melting point range.
why can't the carbon dioxide cycle easily correct for the increasing amounts of carbon dioxide introduced into our atmosphere by industrialization
The carbon dioxide cycle refers to the natural process of exchanging carbon dioxide between the atmosphere, oceans, and land. This cycle can help to regulate the levels of carbon dioxide in the atmosphere over long periods of time.
However, it is not able to easily correct for the increasing amounts of carbon dioxide that have been introduced into the atmosphere by industrialization for several reasons: Carbon dioxide emissions from human activities are much larger than natural carbon dioxide sources: Human activities, such as burning fossil fuels, deforestation, and industrial processes, have greatly increased the amount of carbon dioxide in the atmosphere.
The natural carbon sinks are not capable of absorbing all the excess carbon dioxide: The carbon dioxide cycle relies on natural carbon sinks such as forests and oceans to absorb carbon dioxide from the atmosphere. However, these natural carbon sinks have limits to their capacity and are becoming saturated with excess carbon dioxide.
The rate of carbon dioxide emissions is much faster than the rate at which natural carbon sinks can absorb carbon dioxide: The natural carbon sinks have a limited capacity to absorb carbon dioxide, and their absorption rate is much slower than the rate at which carbon dioxide is being emitted by human activities.
This means that the excess carbon dioxide remains in the atmosphere for longer periods of time, contributing to the buildup of carbon dioxide in the atmosphere.
To know more about carbon dioxide here
https://brainly.com/question/3049557
#SPJ4
When 300 grams of water cools from 50. °C to 25°C, the total amount of heat energy released by the water is?
The total amount of heat energy released by the water is 31,350 J.
What is heat capacity?Heat capacity is a physical property of a substance that describes how much heat energy is required to raise the temperature of the substance by a certain amount.
The amount of heat energy released by the water can be calculated using the specific heat capacity of water and the change in temperature:
Q = m × c × ΔT
where Q is the amount of heat energy released, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
For water, the specific heat capacity is approximately 4.18 J/(g°C).
So, plugging in the values:
Q = 300 g × 4.18 J/(g°C) × (50°C - 25°C)
Q = 300 g × 4.18 J/(g°C) × 25°C
Q = 31,350 J
Therefore, the total amount of heat energy released by the water is 31,350 J.
To know more about heat energy, visit:
https://brainly.com/question/25384702
#SPJ1
which state of matter is found in the universe but uncommon on earth
Plasma is a state of matter that is found in the universe but uncommon on Earth.
Plasma is an ionized gas in which some or all of the atoms have been stripped of their electrons, resulting in a mixture of free electrons and positively charged ions.
Plasma is the most common state of matter in the universe, as stars are composed primarily of plasma. It is also found in other celestial bodies such as nebulas, the solar wind, and lightning.
On Earth, plasma is less common as it requires a lot of energy to create and maintain, and is typically only found in specific conditions such as in lightning bolts, some flames, and in some types of welding.
Learn more about plasma here:
https://brainly.com/question/18207038
#SPJ4
The volume occupied by 9.03×10^23 molecules of N2 gas at STP is closest to??A) 1.50 LB) .500 LC) 22.4 LD) 33.6 L
The volume of the N₂ gas at STP is 33,6 liter. 9,03 × 10²³ molecules of N2 gas equal 1,5 mol N₂.
Volume at STP or the molar volume for every gas at standard temperature and pressure is 22,4 liter/mol. To find out the volume of the N₂ gas at STP you can use the following steps:
Step 1: The first step you have to do is calculate the number of moles of the compound.
mol = number of particles ÷ Avogadro's number
= 9,03 × 10²² ÷ 6,02 × 10²³
= 9,03 ÷ 6,02
= 1,5 mol
Step 2: The next step is to calculate the volume of N₂ in the STP state
Volume N₂ = n × volume at STP
= 1,5 mol × 22,4 liter/mol
= 33,6 liter
Learn more about volume at STP here: https://brainly.com/question/29796637
#SPJ1
if you begin with the highest amount of available entropy, which phase change would represent a decrease in entropy?
Entropy and the disorder of the substance both diminish as a result of a phase transition from a liquid to a solid (freezing) or from a gas to a liquid (condensation).
Entropy rises with temperature as well as when a substance transforms from a solid to a liquid to a gas. Because they may move about the most freely, gases have the highest entropy levels. As a result of the phase melting, which results in a larger internal energy change, the entropy changes during phase transition increase. The transition from a gaseous or liquid phase to a solid phase occurs when the phase is moving toward lower internal energy, which results in a drop in the system's entropy.
Learn more about entropy here:
https://brainly.com/question/13146879
#SPJ4
when a 10.0 g sample of an unknown organic acid (contains c, h, o) is subjected to combustion analysis 21.2 grams of co2 and 3.25 g of h2o are produced. what is the empirical formula of the acid?
the empirical formula of the unknown organic acid is C9.5H3.55O2.5.
To find the empirical formula, we need to calculate the moles of carbon, hydrogen, and oxygen in the sample:
Moles of CO2 produced: 21.2 g CO2 x (1 mol CO2/44.01 g CO2) = 0.482 mol CO2
This represents the moles of carbon in the sample.
Moles of H2O produced: 3.25 g H2O x (1 mol H2O/18.015 g H2O) = 0.18 mol H2O
Moles of oxygen: The remaining mass of the sample after subtracting the mass of carbon and hydrogen is due to oxygen.
Mass of oxygen = 10.0 g - (21.2 g/44.01 g/mol x 12.01 g/mol + 3.25 g/18.015 g/mol x 2.02 g/mol) = 2.03 g
Moles of oxygen = 2.03 g / 16.00 g/mol = 0.127 mol
Carbon: 0.482 mol CO2 / 0.127 mol = 3.8
Hydrogen: 0.18 mol H2O / 0.127 mol = 1.42
Oxygen: 0.127 mol O2 / 0.127 mol = 1
These ratios indicate that the empirical formula is C3.8H1.42O1, but we need to convert this to a whole-number ratio. The simplest whole-number ratio is obtained by multiplying each subscript by 2.5:
C3.8H1.42O1 x 2.5 = C9.5H3.55O2.5
Therefore, the empirical formula of the unknown organic acid is C9.5H3.55O2.5.
Learn more about moles here:
https://brainly.com/question/28239680
#SPJ4
why can lactose intolerant individuals digest sucrose without any problems?
Lactose intolerant individuals digest sucrose without any problems because it produces digestive enzymes from sucrose.
Generally, lactose-intolerant individuals only lack the lactase enzyme but may still produce the enzyme for digesting sucrose. For example, a milk allergy is the result of an immune reaction to one or more of the components of milk, such as the protein casein.
Lactose intolerance in our body when body can't break down or digest lactose. Lactose is a type of sugar that is found in milk and milk products. Basically, lactose intolerance happens when your small intestine does not make enough of a digestive enzyme called lactase. Lactase helps in breaking down the lactose in food so our body can absorb it.
Learn more about lactose from the link given below.
https://brainly.com/question/23076188
#SPJ4
I am doing feeding yeast experiment with balloons. And I need to know if normal sugar, brown sugar, and diet sugar have a different ph level, and if one of them will affect the most.
The pH level of a solution is a measure of its acidity or alkalinity. In general, the higher the pH level, the more basic (alkaline) the solution. Different sugars can have different effects on the pH level of a solution.
What is acidity?Acidity is a measure of the concentration of hydrogen ions (H+) in a solution. It's measured by the pH scale, which ranges from 0 to 14. Acids have a pH value of less than 7, while bases have a pH value greater than 7.
Normal sugar (sucrose) has a neutral pH of 7, meaning it does not have an effect on the pH level of a solution. Brown sugar, on the other hand, is slightly acidic with a pH of about 5.5. Diet sugar, such as aspartame and saccharin, is even more acidic, with a pH of 3.5 or lower.
When performing the yeast experiment with balloons, the type of sugar used can have an effect on the pH level of the solution. The most acidic sugar, diet sugar, will have the greatest effect on the pH level, as it will lower the pH of the solution. This could potentially affect the yeast activity and the rate at which the balloons inflate.
To learn more about acidity
https://brainly.com/question/172153
#SPJ1
How many grams are 7. 00 x 10^22 molecules of NaOH?
The mass of 7,00 × 10²² NaOH molecules is 4,64 gram. 7,00 × 10²² NaOH molecules equal 0.116 moles NaOH.
To find out the mass of 7,00 × 10²² NaOH molecules you can use the following steps
Step 1: The first step is to calculate the number of moles of the compound.
mol = number of particles ÷ Avogadro's number
= 7,00 × 10²² ÷ 6,022 × 10²³
= 0,116 mol
Step 2: The next step is to calculate the mass of the molecules.
mass = mol × relative molecular mass
= 0,116 mol × 40 gram/mol
= 4,64 gram
So the mass of 7,00 × 10²² NaOH molecules is 4,64 gram.
Learn more about number of particles here: https://brainly.com/question/29367909
#SPJ1
What is the name of CoCl2•6H20?
Answer:
The name of the chemical compound CoCl2•6H2O is cobalt(II) chloride hexahydrate.
Look at the diagram shown below. Could this equipment be used to find out how much energy a fuel
gives out when it burns?
no
yes
Thermometer
Container
B
Lid
Mixed chemicals
Answer: Yes
Explanation:
Answer:
YESS
Explanation:
This equipment could be used to find out how much energy a fuel gives out when it burns. By measuring the temperature change in the container, the energy released by the combustion reaction can be calculated. The thermometer measures the temperature change and the container is used to hold the mixed chemicals (fuel and oxidizer). The lid is used to prevent the loss of heat and to create a closed system for the reaction to take place.
ALLEN
a piece of charcoal is found to contain 30% of the carbon 14 that it originally had. when did the tree die from which the charcoal came? use 5600 years as the half-life of carbon 14
The time when the tree die from which the charcoal came is 1.02×10⁻⁴ years. if half-time of carbon-14 is 5600years.
An amount is dependent upon exponential decay on the off chance that it diminishes at a rate relative to its ongoing worth. Emblematically, this interaction can be communicated by the accompanying differential equation, where N is the amount and λ (lambda) is a positive rate called the dramatic rot steady, crumbling consistent, rate steady, or change consistent: dN/dt=-λN. The answer for this situation (see deduction beneath) is: N(t)=N₀e⁻[tex]\frac{k}{t}[/tex], where N(t) is the amount at time t, N₀ = N(0) is the underlying amount, that is to say, the amount at time t = 0.
We know that exponential decay is given
A[tex]_t[/tex] = A₀ e⁻[tex]\frac{k}{t}[/tex] where K is decay constant.
We firstly find decay constant by using the half life-time
We know that t=ln2/k where t is half life time .Since,t=5600years given
=>5600=ln2/k
=>k=(ln2/5600)years
Now,it is given that at any particular instant amount of charcoal remain is 30 % of initial amount.
So, (30/100)A₀=A₀e⁻[tex]\frac{k}{t}[/tex]
Here,k=(ln2/5600)years
=>30/100=e⁻ [tex]\frac{ln2/5600}{t}[/tex]
Taking ln on both sides of equation,we get
=>ln(30/100)=ln(e⁻ [tex]\frac{ln2/5600}{t}[/tex])
=>ln30-ln 100= - ln2/5600t
=>3.40 - 4.60 = -0.693/5600t
=> - 1.205 = -0.693/5600t
=>t=0.693/ (1.205×5600)
=>t=0.693 / 6748years
=>t=0.000102years or 1.02×10⁻⁴ years.
To know more about exponential decay,visit here:
https://brainly.com/question/14355665
#SPJ4
How many grams of fluoride gas (F2) are needed to react with 27.5g of nitrogen gas (N2)?
111g of Fluorine gas is needed to react with 27.5g of Nitrogen gas
the chemical reaction between n2 and f2 : N2 +3F2 -> 2NF3
This means we need 3 moles of fluorine for every molecule of nitrogen gas.
1 mole of N2 = 27.5g
molar mass of N2 = 28g
Therefore 1 mole of N2= 27.5/28 g/mol = 0.98 mol
number of moles of F2 required are 3*0.98 = 2.94 moles
to convert moles to grams, multiply the number of moles of F2 by its molar mass = 2.94*38 = 111g.
Therefore 111g of Fluorine gas is needed to react with 27.5g of Nitrogen gas.
For more questions regarding mole theory:
https://brainly.com/question/28003480
can you assume that any coloration you see in an animal is cryptic? why or why not
No, it is not safe to assume that any coloration seen in an animal is cryptic. While many animals have evolved to have coloration that helps them blend into their environment and avoid predators or attract mates, there are also many animals that have bright and conspicuous coloration for other reasons, such as warning predators of their toxicity or advertising their fitness to potential mates. Therefore, it is important to consider the specific context and behavior of the animal before making assumptions about the purpose of its coloration.
What is cryptic colouration?Cryptic coloration refers to an animal's ability to blend in with its environment, making it difficult for predators or prey to spot them. This can help the animal avoid being detected, making it easier to hunt or avoid being hunted. Cryptic coloration can take many forms, including camouflage, mimicry, or disruptive coloration, and is a common adaptation seen in many species of animals, including insects, birds, reptiles, and mammals.
To know more about mimicry, visit:
https://brainly.com/question/24993053
#SPJ1
In the following redox reaction identify the element undergoing oxidation and the element undergoing reduction. 4NH3(g)+5O2(g)⟶4NO(g)+6H2O(g)
According to the question the element undergoing oxidation is nitrogen (N).
What is oxidation?Oxidation is a chemical reaction that involves the loss of electrons from an atom, molecule, or ion. This process creates an oxidized version of the original molecule or ion, which can often be identified by a change in color or smell. Oxidation reactions can occur in both organic and inorganic molecules. Examples of oxidation include the rusting of iron and the browning of an apple when exposed to air. Oxidation often results in the release of energy, which can be harnessed for various applications.
This is because it is gaining oxygen (O) atoms in the reaction. The element undergoing reduction is oxygen (O). This is because it is losing electrons (in the form of oxygen atoms) in the reaction.
To learn more about oxidation
https://brainly.com/question/21851295
#SPJ1
will increasing the partial pressure of the reactants increase the production of ammonia from nitrogen gas and hydrogen gas?
Yes, increasing the partial pressure of the reactants will increase the production of ammonia from nitrogen gas and hydrogen gas.
This is because the rate of the reaction is directly proportional to the partial pressures of both the reactants. As the partial pressure of the reactants increases, the rate of the reaction increases, and therefore more ammonia is produced. The reaction equation is as follows:
N2 + 3H2 → 2NH3
The equation: gives the rate of this reaction.
Rate = k[N2][H2]3
where k is a rate constant and [N2] and [H2] are the partial pressures of nitrogen gas and hydrogen gas, respectively.
learn more about hydrogen gas Refer:brainly.com/question/14355155
#SPJ4
