The mass of 0.500 kg that was dropped from a height of 1.50 m on the Moon reached the Moon's surface with an acceleration of approximately 1.63 m/s².
To determine the acceleration of the dropped mass on the Moon, we can use the equation for free fall:
d = (1/2) * g * t²
where d is the distance traveled, g is the acceleration due to gravity, and t is the time.
In this case, the distance traveled is the height the mass was dropped from, which is 1.50 m. The acceleration due to gravity on the Moon is approximately 1/6th of that on Earth, so g = (1/6) * 9.8 m/s² = 1.63 m/s².
We can rearrange the equation to solve for time:
t = √(2 * d / g)
Substituting the given values:
t = √(2 * 1.50 m / 1.63 m/s²) ≈ 1.02 s
Therefore, the mass reached the Moon's surface in approximately 1.02 seconds. The acceleration of the dropped mass on the Moon is equal to the acceleration due to gravity on the Moon, which is approximately 1.63 m/s².
To know more about gravity refer here:
https://brainly.com/question/31321801#
#SPJ11
for an m/g/1 system with λ = 20, μ = 35, and σ = 0.005. find the probability the system is idle.
For a m/g/1 system with parameters 20, 35, and 0.005, respectively. When the system is not in use, the likelihood is 0.4286.
Thus, When the service rate is 35 and the arrival rate is 20, with a standard deviation of 0.005, the likelihood of finding no customers in the wait is 0.4286, or 42.86%.
An m/g/1 system has a m number of servers, a g number of queues, and a g number of interarrival time distributions. Here, = 20 stands for the arrival rate, = 35 for the service rate, and = 0.005 for the service time standard deviation and probablility.
Using Little's Law, which asserts that the average client count in the system (L) equals 1, we may calculate the probability when the system is idle and parameters.
Thus, For a m/g/1 system with parameters 20, 35, and 0.005, respectively. When the system is not in use, the likelihood is 0.4286.
Learn more about Probability, refer to the link:
https://brainly.com/question/31828911
#SPJ4
To what temperature would you have to heat a brass rod for it to be 1.4 % longer than it is at 25 ∘C?
Express your answer to two significant figures and include the appropriate units.
The brass rod would need to be heated to approximately 737°C to be 1.4% longer than its length at 25°C.
To determine the temperature at which a brass rod would be 1.4% longer than its length at 25°C, we can use the thermal expansion coefficient of brass. The thermal expansion coefficient of brass is typically around 19 × 10^(-6) per degree Celsius.
Let's denote the initial length of the brass rod at 25°C as L₀. The increase in length is given by ΔL = 1.4% of L₀.
ΔL = 0.014 * L₀
The change in length is related to the temperature change ΔT by the formula:
ΔL = α * L₀ * ΔT
Where α is the thermal expansion coefficient.
Substituting the values, we have:
0.014 * L₀ = (19 × 10^(-6) / °C) * L₀ * ΔT
Simplifying the equation, we find:
ΔT = (0.014 / (19 × 10^(-6) / °C))
ΔT ≈ 0.7368 × 10^3 °C
Therefore, the brass rod would need to be heated to approximately 737°C to be 1.4% longer than its length at 25°C.
To know more about thermal expansion coefficient, click here:
https://brainly.com/question/13260447
#SPJ11
steps to the solution.
QUESTION 7 A uniform solid cylinder with a radius of 63 cm and a mass of 3.0 kg is rotating about its center with an angular speed of 44rpm. What is its kinetic energy?
The kinetic energy of the rotating solid cylinder is approximately 1741.5 Joules.
The formula for the kinetic energy of a rotating object is given by:
Kinetic energy = (1/2) * I * ω²
where I is the moment of inertia and ω is the angular velocity.
The moment of inertia for a solid cylinder rotating about its center is given by:
I = (1/2) * m * r²
where m is the mass of the cylinder and r is its radius.
Substituting the given values into the formulas, we have:
m = 3.0 kg
r = 63 cm = 0.63 m
ω = 44 rpm = (44/60) * 2π rad/s ≈ 4.619 rad/s
Calculating the moment of inertia:
I = (1/2) * m * r²= (1/2) * 3.0 kg * (0.63 m)² = 0.59535 kg·m²
Substituting the values into the kinetic energy formula:
Kinetic energy = (1/2) * I * ω² = (1/2) * 0.59535 kg·m² * (4.619 rad/s)² ≈ 1741.5 J
Therefore, the kinetic energy of the rotating solid cylinder is approximately 1741.5 Joules.
To know more about kinetic energy, refer here:
https://brainly.com/question/22174271#
#SPJ11
Exercise 2.35 Part A If a flea can jump straight up to a height of 0.440 m, what is its initial speed as it leaves the ground? || ΑΣΦ SHE ? V= m/s Submit ▾ Part B Request Answer How long is it in
Part A: The initial speed of the flea as it leaves the ground is approximately 2.09 m/s.
Part B: The flea is in the air for approximately 0.301 seconds.
Explanation to the above given short answers are written below,
Part A: To find the initial speed of the flea, we can use the fact that the vertical motion of the flea follows the equations of motion for free fall.
The height reached by the flea is given by the equation
h = (v^2) / (2g),
where v is the initial speed and
g is the acceleration due to gravity.
Rearranging the equation to solve for v, we have
v = √(2gh).
Substituting the given values, we have
v = √(2 * 9.8 m/s^2 * 0.440 m) ≈ 2.09 m/s.
Part B: The time the flea is in the air can be calculated using the equation
t = √(2h/g),
where h is the height and
g is the acceleration due to gravity.
Substituting the given values, we have
t = √(2 * 0.440 m / 9.8 m/s^2) ≈ 0.301 s.
Therefore, the flea is in the air for approximately 0.301 seconds.
To know more about "Acceleration due to gravity" refer here:
https://brainly.com/question/29892489#
#SPJ11
Calculate the energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom.
delta16-1.GIFE = _____ Joules
The energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom is 8.44 x 10^-20 J.
Given that the transition of an electron from the n = 5
level to the n = 8 level of a hydrogen atom and
the energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom is to be calculated.
We know that the energy for the transition of an electron from the n = i level to the n = f
level of a hydrogen atom is given by the formula:ΔE = -2.18 x 10^-18 (1/nf² - 1/ni²)
where,ΔE = Energy for the transition of an electronn = Principal Quantum number
f = Final Statei = Initial state
Therefore, substituting the given values in the formula, we get;ΔE = -2.18 x 10^-18 (1/8² - 1/5²)ΔE = -2.18 x 10^-18 (1/64 - 1/25)ΔE = -2.18 x 10^-18 [(25 - 64)/1600]
ΔE = -2.18 x 10^-18 [- 39/1600]
ΔE = 8.44 x 10^-20 J
The energy for the transition of an electron from the n = 5 level to the n = 8 level of a hydrogen atom is 8.44 x 10^-20 J.
Learn more about electron
brainly.com/question/12001116
#SPJ11
When the bell in a clock tower rings with a sound of 470 Hz, a pigeon roosting in the belfry flies directly away from the bell ▼ Part A If the pigeon hears a frequency of 448 Hz, what is its speed? Express your answer to three significant figures and include appropriate units.
The speed of pigeon is approximately 12.2 meters per second.
To determine the speed of the pigeon, we can use the Doppler effect equation, which relates the observed frequency to the source frequency and the relative speed between the source and the observer. In this case, the observed frequency is 448 Hz, and the source frequency is 470 Hz.
The Doppler effect equation for sound can be written as:
f' = f(v + vo) / (v + vs)
Where:
f' is the observed frequency,f is the source frequency,v is the speed of sound,vo is the speed of the observer,vs is the speed of the source.Since the pigeon is flying away from the bell, its speed (vo) is positive, and the speed of sound (v) is a constant. We need to solve for the speed of the pigeon (vs).
Rearranging the equation, we get:
vs = f'v / (f' - f)
Substituting the given values, we have:
vs = (448 Hz)(343 m/s) / (448 Hz - 470 Hz)
Calculating this expression, we find that the speed of the pigeon is approximately 12.2 meters per second.
Learn more about Doppler effect
brainly.com/question/15318474
#SPJ11
suppose a space probe of mass m1 = 4200 kg expels m2 = 3300 kg of its mass at a constant rate with an exhaust speed of vex = 1.95 × 103 m/s.
The increase in velocity of the space probe is 11750 m/s.
The principle of conservation of momentum.
The initial momentum of the system (space probe + expelled mass) is given by:
p_initial = (m₁ + m₂) × v_initial
Where m₁ is the mass of the space probe, m₂ is the mass of the expelled mass, and v_initial is the initial velocity of the system. After the expulsion of mass, the remaining mass of the space probe is (m₁ - m₂), and its final velocity is v_final. The momentum of the expelled mass is given by:
p_expelled = m₂ × v_exhaust
p_final = (m1 - m2) × v_final
p_initial + p_expelled = p_final
(m₁ + m₂) × v_initial + m₂ × v_exhaust = (m₁ - m₂) × v_final
v_final = [(m₁ + m₂) × v_initial + m₂ × v_exhaust] / (m₁ - m₂)
v_final = [(4200 kg + 3300 kg) × 0 m/s + 3300 kg × (1.95 × 10³ m/s)] / (4200 kg - 3300 kg)
v_final = (12,330,000 kg×m/s) / (900 kg)
v_final ≈ 13,700 m/s
Therefore, the increase in velocity of the space probe is 11750 m/s.
Learn more about velocity, here:
https://brainly.com/question/30559316
#SPJ4
Your question is incomplete, most probably the full question is this:
Suppose a space probe of mass m₁ = 4200 kg expels m₂ = 3300 kg of its mass at a constant rate with an exhaust speed of vex = 1.95 × 10³ m/s. Find the change in velocity.
A car traveling at 24.0 m/s runs out of gas while traveling up a
19.0 ∘ slope. How far up the hill will it coast before starting to
roll back down? Express your answer with the appropriate units.
A car traveling at 24.0 m/s runs out of gas while traveling up a 19.0 ∘ slope, the car will coast approximately 42.5 meters up the hill before starting to roll back down.
To determine how far the car will coast up the hill before rolling back down, we need to calculate the distance traveled along the slope.
Initial velocity, v = 24.0 m/s
Slope angle, θ = 19.0°
The force acting on the car can be decomposed into two components: the force of gravity pulling the car downhill and the force of friction opposing the motion. Since the car is on the verge of rolling back down, the force of friction must equal the force of gravity.
The force of gravity pulling the car downhill can be calculated using the equation:
Fg = m * g * sin(θ)
The force of friction opposing the motion is given by:
Ff = μ * m * g * cos(θ)
Since the car is on the verge of rolling back, Fg = Ff, which gives:
m * g * sin(θ) = μ * m * g * cos(θ)
Simplifying and canceling out the mass and gravitational acceleration, we have:
sin(θ) = μ * cos(θ)
Rearranging the equation, we get:
μ = tan(θ)
Now we can calculate the coefficient of friction:
μ = tan(19.0°) = 0.342
The distance the car will coast up the hill can be found using the equation:
d = (v^2) / (2 * g * μ)
Substituting the given values, we have:
d = (24.0^2) / (2 * 9.8 * 0.342) ≈ 42.5 meters
To know more about "Force of gravity" refer here:
https://brainly.com/question/30429270#
#SPJ11
what are five vehicles that can go faster than 1,000 kilometers per hour and name the vehicle use place value to find the fastest and slowest vehicle in your table now calculate the difference between the speeds of two of the vehicle that was picked.
The difference in speed between the Bugatti Chiron Super Sport 300+ and the TGV is 84.4 kilometers per hour.
The following are five vehicles that can travel at speeds exceeding 1,000 kilometers per hour:
1. Bugatti Chiron Super Sport 300+: The Bugatti Chiron Super Sport 300+ is the fastest vehicle in the world, with a top speed of 490.4 kilometers per hour. This car is designed for use on the road.
2. Bloodhound LSR: Bloodhound LSR is another vehicle that can travel at speeds of more than 1,000 kilometers per hour. The car is intended to break the land speed record and is still in development.
3. TGV: The TGV, or Train à Grande Vitesse, is the world's fastest train, capable of reaching speeds of up to 574.8 kilometers per hour. It is used in France and other European countries.
4. X-15: The X-15 is a rocket-powered aircraft that can travel at speeds of up to 7,274 kilometers per hour. The plane was used by NASA in the 1960s to conduct research on high-speed flight.
5. Space Shuttle: The Space Shuttle was capable of traveling at speeds of up to 28,968 kilometers per hour. It was used by NASA for space exploration missions.
To calculate the difference between the speeds of two of the vehicles that were selected, we'll use the fastest and slowest vehicles in our table, which are the Bugatti Chiron Super Sport 300+ and the TGV.
The fastest vehicle, the Bugatti Chiron Super Sport 300+, has a speed of 490.4 kilometers per hour.
The slowest vehicle, the TGV, has a speed of 574.8 kilometers per hour.
To calculate the difference between these two speeds, we'll subtract the speed of the Bugatti from the speed of the TGV:
574.8 km/h - 490.4 km/h = 84.4 km/h.
Therefore, the difference in speed between the Bugatti Chiron Super Sport 300+ and the TGV is 84.4 kilometers per hour.
To learn more about speed visit;
https://brainly.com/question/18094060
#SPJ11
A 60-Ohm resistor is connected in parallel with a 20-Ohm resistor. What is the equivalent resistance of the combination?
The equivalent resistance of a 60-Ohm resistor connected in parallel with a 20-Ohm resistor is 13.3 Ohms.
To determine the equivalent resistance of a combination of resistors connected in parallel, the following formula can be used:
Req=1/(1/R1+1/R2+...+1/Rn)
where Req is the equivalent resistance and R1, R2, ..., Rn are the resistances of the individual resistors connected in parallel.
Given that a 60-Ohm resistor is connected in parallel with a 20-Ohm resistor.Using the above formula we have;
Req=1/(1/60 + 1/20)
Calculate the individual reciprocals first.
1/60 = 0.01671/20 = 0.05
Substitute into the formula;Req = 1/(0.0167 + 0.05)Req = 13.3 ohms
Therefore, the equivalent resistance of the combination is 13.3 Ohms.
In summary, the equivalent resistance of a 60-Ohm resistor connected in parallel with a 20-Ohm resistor is 13.3 Ohms. The formula used in solving for the equivalent resistance is Req=1/(1/R1+1/R2+...+1/Rn).
To know more about equivalent resistance, visit:
https://brainly.com/question/31788815
#SPJ11
A very long straight wire carries a current I. At the instant when a charge
+
Q
at point
P
has velocity
→
V
, as shown, the force on the charge is
the force on the charge is μ₀I[QV×r]/[4πr³].
The force on a charge of +Q at point P with velocity →V is given by:
B = μ₀I[QV×r]/[4πr³]
Where,μ₀ is the permeability of free space, μ₀ = 4π×10⁻⁷ Tm/ICurrent carried by the very long straight wire, ICharge, QVelocity vector, →VForce, B
Therefore, the force on the charge is given by:
B = μ₀I[QV×r]/[4πr³]
where r is the distance between the wire and the point P.
Hence, the answer is μ₀I[QV×r]/[4πr³].
learn more about force here
https://brainly.com/question/12785175
#SPJ11
A box with a mass of 25 kg rests on a horizontal surface. The coefficient of static friction between the box and the surface is 0.20. What horizontal force must be applied to the box for it to start s
To start the box sliding along the surface in the positive x direction, a horizontal force greater than 49 N in the positive x direction must be applied.
The maximum static friction force can be calculated using the equation:
f_static_max = μ_static * N
where μ_static is the coefficient of static friction and N is the normal force acting on the box. In this case, since the box is on a horizontal surface, the normal force is equal to the weight of the box:
N = m * g
Substituting the given values:
N = 25 kg * 9.8 m/s² = 245 N
Now, we can determine the maximum static friction force:
f_static_max = 0.20 * 245 N = 49 N
This is the maximum force that can be exerted before the box starts sliding. Therefore, to overcome the static friction and initiate sliding in the positive x direction, a horizontal force greater than 49 N in the positive x direction must be applied. The exact value of the force will depend on the magnitude of the static friction and the force applied.
To know more about static friction refer here:
https://brainly.com/question/30886698#
#SPJ11
Complete Question:
A box with a mass of 25 kg rests on a horizontal surface. The coefficient of static friction between the box and the surface is 0.20. What horizontal force must be applied to the box for it to start sliding along the surface in the positive x direction? Use g = 9.8 m/s². O A horizontal force greater than 49 N in the positive x direction. O A horizontal force equal to 49 N in the positive x direction. O A horizontal force less than 49 N in the positive x direction. O A horizontal force that is either equal to or greater than 49 N in the positive x direction. O None of the other answers
do the waves interfere constructively or destructively at an observation point 91.0 m from one source and 221 m from the other source?
Destructive interference will not occur. When waves interfere constructively, they add up their amplitudes. On the other hand, when waves interfere destructively, they reduce their amplitudes. For two sources of waves to interfere constructively or destructively, they must meet certain conditions.
Constructive interference: When two waves meet each other and interfere constructively, the wave amplitudes add up together. Constructive interference occurs when two waves meet and their phases are in phase with each other, and they have the same frequency. The path difference between the two sources of waves must be an integer multiple of the wavelength. This means that the two waves will be in phase with each other.
For the given observation point, 91.0 m from one source and 221 m from the other source, the path difference can be calculated by taking the difference of the two distances. The distance between two sources is 221-91 = 130 m, which is the path difference. If the wavelength is known, the path difference can be expressed as a fraction of the wavelength. If the path difference is an integer multiple of the wavelength, constructive interference will occur.
Destructive interference: When two waves meet each other and interfere destructively, the wave amplitudes cancel each other out. The wave amplitudes must be in antiphase with each other for destructive interference to occur. This means that the wave from one source is in the opposite phase to the wave from the other source. To produce destructive interference, the path difference between the two sources must be half a wavelength, 1.5 wavelengths, 2.5 wavelengths, etc. For the given observation point, the path difference of 130 m is not half a wavelength, 1.5 wavelengths, 2.5 wavelengths, etc. Therefore, destructive interference will not occur.
To learn more about interference visit;
https://brainly.com/question/31857527
#SPJ11
A 350-kg wooden raft floats on a lake. When a 70-kg man stands on the raft, it sinks 3.0 cm deeper into the water. When he steps off, the raft oscillates for a while. Part A What is the frequency of oscillation? Express your answer using two significant figures. Part B What is the total energy of oscillation (ignoring damping)? Express your answer using two significant figures.
The frequency of oscillation is 0.27 Hz & The total energy of oscillation of the raft (ignoring damping) is 0.000944 J.
Part A The frequency of oscillation of the raft can be calculated using the following formula,f = 1 / (2π) √(k / m)where,f is the frequency of oscillation of the raftk is the spring constant of the raftm is the mass of the raft + man (420 kg)
Rearranging the formula,we get:k = (2πf)²mOn the raft, the net upward force acting is equal to the weight of the displaced water. When the man stands on the raft, the weight of the raft + man is equal to the weight of the displaced water + weight of the man.Using the principle of floatation, we get:Weight of displaced water + Weight of man = Weight of the raft + man420g = (350 + w)g + 70g
Where,g is the acceleration due to gravity.w = 0.857 kgUsing this value of w, we can now calculate the spring constant of the raft,k = (2πf)²m= (2πf)²(420)= 882π²f²Hence,f = 0.27 Hz
Part B The total energy of oscillation of the raft can be calculated using the formula,E = 0.5 kA²where,E is the total energy of oscillation of the raftA is the amplitude of oscillation of the raftWhen the man stands on the raft, the raft sinks 3.0 cm deeper into the water. Hence, the amplitude of oscillation is 1.5 cm or 0.015 m.Substituting the values of k and A, we get,E = 0.5 kA²= 0.5 × 882π²f² × 0.015²= 0.000944 J Therefore, the total energy of oscillation of the raft (ignoring damping) is 0.000944 J.
To know more about oscillator visit :
https://brainly.com/question/30111348
#SPJ11
a cubic box of volume 4.6×10−2 m3 is filled with air at atmospheric pressure at 20 ?c . the box is closed and heated to 194?c . Part A What is the net force on each side of the box?
The box is subject to a net force of 0.98 N on each side.
Given information:
Volume of cubic box = 4.6 × 10⁻² m³
Initial temperature = 20 °C
Final temperature = 194 °C
First, let's determine the mass of the air inside the cubic box.
The density of air is 1.2041 kg/m³ at 20 °C.
Thus, mass of the air
= density × volume
= 1.2041 kg/m³ × 4.6 × 10⁻² m³
= 0.05536 kg
Next, let's determine the initial pressure of air. At standard temperature and pressure (STP), pressure is 101.325 kPa (kilopascals) or 101325 Pa (pascals). At 20 °C, air density is slightly less than that at STP, so we can expect the pressure to be slightly greater.
Using the ideal gas law,
PV = nRT, where
P = pressure,
V = volume,
n = number of moles,
R = ideal gas constant, and
T = temperature, we can solve for pressure.
Rearranging the formula, we have:
P = nRT/V
The ideal gas constant, R = 8.31 J/(mol·K), and the molecular mass of air is approximately 29 g/mol (grams per mole).
Converting the volume of air to liters, we have 4.6 × 10⁻² m³ = 46 L
Initial pressure of air = 1.0332 × 10⁵ Pa × (0.05536 kg)/(29 g) × (8.31 J/(mol·K)) × (20 + 273.15) K/46 L
≈ 260.6 kPa
At 194 °C, using the same formula as before, we get a pressure of P = 1021.3 kPa. The change in pressure is therefore
ΔP = P - P₀
= 1021.3 kPa - 260.6 kPa
= 760.7 kPa
To find the net force on each side of the box, we need to use the formula for pressure,
P = F/A, where
P = pressure,
F = force, and
A = area.
We can rearrange this formula to solve for force: F = PA
We know the change in pressure, and we can assume that the volume of the box remains constant. Therefore, the net force on each side of the box can be determined using the following formula: F = ΔP × AAtmospheric pressure at sea level is approximately 101.3 kPa, so the difference in pressure is approximately 759.4 kPa. Since the box is cubic, each side has an area of A = L², where L is the length of one side. We can find L using the volume of the box,
V = L³:4.6 × 10⁻² m³
= L³L ≈ 3.59 × 10⁻² m
Thus, the area of each side of the box is approximately A = (3.59 × 10⁻² m)² = 1.29 × 10⁻³ m²
Now, we can calculate the net force on each side of the box:
F = ΔP × A= (759.4 × 10³ Pa) × (1.29 × 10⁻³ m²)
= 0.98 N
Therefore, the net force on each side of the box is 0.98 N.
Learn more about standard temperature and pressure (STP): https://brainly.com/question/30778889
#SPJ11
A crane lifts a steel submarine of density 7800 kg/m3 and mass 20,000 kg. What is the tension in the lifting cable (a) when the submarine is submerged in water of density 1000 kg/m3, and (b) when it is entirely out of the water?
A) (a) 2.0 x 10^5 N (b) 2.6 x 10^3 N
B) (a) 2.0 x 10^5 N (b) 1.7 x 10^5 N
C) (a) 2.6 x 10^3 N (b) 2.0 x 10^5 N
D) (a) 1.7 x 10^5 N (b) 2.0 x 10^5 N
The tension in the lifting cable when the submarine is entirely out of the water is [tex]1.96 * 10^{5}[/tex] N
Given, Density of the steel submarine, d1 = 7800 kg/m3 Density of water, d2 = 1000 kg/m3. Mass of the steel submarine, m = 20000 kg
The formula to find the tension in the lifting cable is given by, Tension in cable = Weight of the object being lifted - Buoyant force on the object(a) When the submarine is submerged in water of density 1000 kg/m3We know that, Weight = Mass x gravity.
Submerged weight of the submarine,
W1 = Volume of the submarine x Density of water x gravity
V1 = m / d1 = 20000 / 7800 = 20 / 7 m3
W1 = V1 x d2 x g = (20 / 7) x 1000 x 9.8 = 2.0 x 104 N
To calculate the buoyant force, Fb = V x d2 x g where V is the volume of the water displaced by the submarine.
Fb = V x d2 x g = m x g
= 20000 x 9.8
= [tex]1.96 * 10^{5}[/tex] N Tension in cable = Weight of the object being lifted - Buoyant force on the object. Tension in cable = W1 - Fb = 2.0 x 104 - [tex]1.96 * 10^{5}[/tex] = -[tex]1.96 * 10^{5}[/tex] N
Therefore, the tension in the lifting cable when the submarine is submerged in water of density 1000 kg/m3 is -1.76 x 105 N
The negative sign indicates that the tension is in the opposite direction of the force of gravity, which means the crane is lowering the submarine into the water.(b) When it is entirely out of the water
When the submarine is entirely out of the water, the buoyant force will be zero. Tension in cable = Weight of the object being lifted - Buoyant force on the object
Tension in cable = m x g = 20000 x 9.8 = [tex]1.96 * 10^{5}[/tex] N. Therefore, the tension in the lifting cable when the submarine is entirely out of the water is [tex]1.96 * 10^{5}[/tex] N
Since the buoyant force is zero, the tension in the cable is equal to the weight of the submarine.
For more information on tension kindly visit to
https://brainly.com/question/31591105
#SPJ11
Two parallel plates are charged to produce a potential difference of 45 V. If the separation between the plates is 0.78 m, calculate the magnitude of the electric field in the space between the plates
Answer:
Approximately [tex]58\; {\rm N\cdot C^{-1}}[/tex].
Explanation:
The electric field strength [tex]E[/tex] at a given position is equal to the electric force the field exerts on each unit of electric charge. Hence, the unit of the electric field would be newtons (unit of force) per coulomb (unit of charge.)
Electric field strength is also equal to the change in electric potential over unit distance. For example, in a uniform electric field, if the electric potential changes by [tex]\Delta V[/tex] over a distance of [tex]d[/tex], strength of the electric field would be [tex]E = (\Delta V) / d[/tex].
The electric field between two parallel plates is approximately uniform. Thus, the equation [tex]E = (\Delta V) / d[/tex] can be used to find the strength of that field.
In this question, magnitude of the potential difference between the two charged plates is [tex]\Delta V = 45\; {\rm V}[/tex] over a distance of [tex]d = 0.78\; {\rm m}[/tex]. Since this field is uniform, magnitude of the strength of this field would be:
[tex]\begin{aligned}E &= \frac{\Delta V}{d} \\ &= \frac{45\; {\rm V}}{0.78\; {\rm m}} \\ &\approx 58\; {\rm N\cdot C^{-1}}\end{aligned}[/tex].
(Note the unit conversion: [tex]1\; {\rm V} = 1\; {\rm J\cdot C^{-1}} = 1\; {\rm N\cdot m\cdot C^{-1}}[/tex].)
The magnitude of the electric field between the parallel plates is approximately 57.69 V/m. This indicates that for every meter of distance between the plates, there is an electric field strength of 57.69 volts.
The electric field between parallel plates is directly proportional to the potential difference and inversely proportional to the separation distance. This relationship is described by the formula E = V / d, where E is the electric field, V is the potential difference, and d is the separation distance.
The magnitude of the electric field between the parallel plates can be calculated using the formula:
Electric field (E) = Potential difference (V) / Separation distance (d)
Potential difference (V) = 45 V
Separation distance (d) = 0.78 m
Calculating the electric field:
E = V / d
E = 45 V / 0.78 m
E ≈ 57.69 V/m
Therefore, the magnitude of the electric field in the space between the plates is approximately 57.69 V/m.
By substituting the given values into the formula, we can calculate the electric field. In this case, the potential difference is 45 V, and the separation distance is 0.78 m. Dividing the potential difference by the separation distance gives us the magnitude of the electric field.
The magnitude of the electric field between the parallel plates is approximately 57.69 V/m. This indicates that for every meter of distance between the plates, there is an electric field strength of 57.69 volts.
To know more about Magnitude, visit
brainly.com/question/30337362
#SPJ11
T/F: will density be higher or lower if there are air bubbles on an object
If there are air bubbles on an object, then the density will be lower.
If there are air bubbles on an object, the density of the object will be lower. In general, density is defined as the amount of mass present in an object per unit volume of the object.
The volume of the object is fixed and the amount of mass present in it decides its density.In the case of an object containing air bubbles, the volume of the object remains the same, but the amount of mass present in it is less due to the air bubbles. This decrease in mass results in a lower density of the object.Therefore, the given statement that the density will be lower if there are air bubbles on an object is True.
To know more about air bubbles visit :-
https://brainly.com/question/11066220
#SPJ11
how does the molecular weight of the pigment relate to the rf value? what does a small rf number tell you about the characteristics of the moving molecules vs a large rf number?
Therefore, when a substance has a large rf value, it implies that it is less polar.
In chromatography, rf value is a measure that is used to assess the migration of a chemical substance on a chromatogram. The value is found by dividing the distance traveled by the substance by the distance traveled by the solvent front. The molecular weight of the pigment is related to the rf value because rf value is a measure of the degree of polarity of the pigment and its molecular weight.
Molecules with a higher molecular weight take a longer period of time to travel a certain distance as compared to those with a lower molecular weight, this is because larger molecules experience stronger intermolecular forces of attraction hence more difficult to move. In this case, if the pigment has a higher molecular weight, it will travel at a slower pace, and as a result, the rf value will be smaller.
Moving molecules with smaller rf values are more polar than those with large values. This is because the more polar a substance is, the more it will bond with the adsorbent on the chromatography paper, hence the lower the distance it will travel.
Therefore, when a substance has a small rf value, it implies that it is more polar. On the other hand, if a molecule has a large rf value, it is less polar because it will move faster due to its low intermolecular forces of attraction and bond less with the adsorbent on the chromatography paper.
To know more about RF value visit:
https://brainly.com/question/30885296
#SPJ11
An electrically conductive rod is 5 mm long and 15 mm in
diameter. It has a resistance of 75 Ω measured from one end to the
other.
Find the current density in the rod if a potential difference of
20
The current density in the rod is J = 0.00151 A/mm². If An electrically conductive rod is 5 mm long and 15 mm has resistance of 75 Ω
Current density in an electrically conductive rod The current density can be calculated as J = I/A, where I is the current in the rod and A is the cross-sectional area of the rod. The cross-sectional area of a cylinder is given by A = πr², where r is the radius of the cylinder. Thus, A = π(15/2)² = 176.7 mm².
From Ohm's Law, V = IR, we can calculate the current as I = V/R = 20/75 = 0.2667 A. Therefore, the current density in the rod is J = 0.2667/176.7 = 0.00151 A/mm². An electrically conductive rod is 5 mm long and 15 mm in diameter. It has a resistance of 75 Ω measured from one end to the other.
The current density is the amount of current per unit area that flows through a material. It is typically expressed in amperes per square millimeter (A/mm²). The cross-sectional area of a cylinder is given by A = πr², where r is the radius of the cylinder. Thus, A = π(15/2)² = 176.7 mm². From Ohm's Law, V = IR, we can calculate the current as I = V/R = 20/75 = 0.2667 A. Therefore, the current density in the rod is J = 0.2667/176.7 = 0.00151 A/mm².
Know more about current density here:
https://brainly.com/question/30786232
#SPJ11
Suppose that a particular artillery piece has a range R = 4330 yards. Find its range in miles. Use the facts that 1 mile. = 5280 ft and 3 ft = 1 yard. Express your answer in miles to three significant
The range of the artillery piece is approximately 2.45 miles.
To convert the range from yards to miles, we need to use the conversion factors provided:
1 mile = 5280 ft and 3 ft = 1 yard.
First, we can convert the range from yards to feet by multiplying by the conversion factor:
4330 yards * (3 ft/1 yard) = 12,990 ft.
Next, we can convert the range from feet to miles by dividing by the conversion factor:
12,990 ft * (1 mile/5280 ft) ≈ 2.459 miles.
Rounding to three significant figures, the range of the artillery piece is approximately 2.45 miles.
To know more about range, refer here:
https://brainly.com/question/29452843#
#SPJ11
it takes 840 s to walk completely around a circular track, moving at a speed of 1.20 m/s? what is the radius of the track?
The radius of the track is approximately 22.91 m.
We are given that it takes 840 s to walk completely around a circular track, moving at a speed of 1.20 m/s. We are to determine the radius of the track.
Let the radius of the track be r metres. The circumference of a circle is given by C = 2πr. The time taken to walk around the track is given by time = distance / speed.
We haveC = 2πr
Distance travelled to walk around the circular track = C = 2πr.
Time taken to walk around the track = 840 s.Speed of walking = 1.20 m/s
The distance covered is obtained by multiplying the speed and the time.
Hence;Distance = Speed × Time Distance = 1.20 m/s × 840 s Distance = 1008 m
We can now equate the distance to the circumference of the track. Circumference of the circular track = Distance travelled
C = 2πr = 1008 m
Dividing both sides by 2π,
we get:r = C / (2π)r = 1008 / (2 × 22 / 7)r
= 1008 / 44r = 22.91 m
The radius of the track is approximately 22.91 m.
To know more about Distance visit:
brainly.com/question/13034462
#SPJ11
A stone is thrown horizontally at 30.0 m/s from the top of a very tall clifl. (a) Calculate its borzoetal peasation and vertical poution at 2 s intervals for the first 10.0s. (b) Plot your positions f
a. The horizontal position and vertical position at 2-second intervals for the first 10.0 seconds is: 0.0 m
b. The graph will show a straight line parallel to the x-axis representing the horizontal position of the stone, and another horizontal line at y = 0.0 m representing the stone's constant vertical position
(a) The stone's horizontal position at 2-second intervals for the first 10.0 seconds is constant and equal to the initial horizontal velocity multiplied by time: 60.0 m, 120.0 m, 180.0 m, 240.0 m, 300.0 m, 360.0 m, 420.0 m, 480.0 m, 540.0 m, 600.0 m.
The stone's vertical position at 2-second intervals for the first 10.0 seconds can be calculated using the formula: vertical position = (1/2) × acceleration × time².
Since the stone is thrown horizontally, its vertical position remains constant at 0.0 m throughout the motion.
(b) The graph of the stone's trajectory will have time on the x-axis and position on the y-axis. Since the stone is thrown horizontally, the horizontal position will increase linearly with time, resulting in a straight line parallel to the x-axis.
The vertical position remains constant at 0.0 m, so it will be a horizontal line at y = 0.0 m.
The graph will show a straight line parallel to the x-axis representing the horizontal position of the stone, and another horizontal line at y = 0.0 m representing the stone's constant vertical position.
To know more about "Velocity" refer here:
https://brainly.com/question/31479424#
#SPJ11
The given question is incomplete, so a complete question is written below,
A stone is thrown horizontally at 30.0 m/s from the top of a very tall cliff. (a) Calculate its horizontal position and vertical position at 2-second intervals for the first 10.0 seconds. (b) Plot your positions on a graph, with time on the x-axis and position on the y-axis, to visualize the stone's trajectory.
Two soccer players start from rest, 28 m apart. They run directly toward each other, both players accelerating. The first player's acceleration has a magnitude of 0.46 m/s². The second player's acceleration has a magnitude of 0.50 m/s². (a) How much time passes before the players collide? (b) At the instant they collide, how far has the first player run? (a) Number Units (b) Number Units
Previous question
(a) The time before the players collide is approximately 5.49 seconds.
(b) At the instant they collide, the first player has run approximately 37.94 meters.
(a) To find the time before the players collide, we can use the concept of relative motion. The players are running directly toward each other, so their velocities are subtracted. The relative velocity can be found by subtracting the second player's velocity from the first player's velocity.
Using the equation v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time, we can calculate the time it takes for the relative velocity to reach 28 meters (the initial separation between the players).
For the first player:
v₁ = u₁ + a₁t
0 = 0 + 0.46t
For the second player:
v₂ = u₂ + a₂t
0 = 0 + (-0.50)t
Solving both equations, we find t = 0 for the first player and t = 0 for the second player, indicating that they start from rest.
The time before the players collide is given by the equation:
t = (final separation) / (relative velocity)
t = 28 m / (0 - (-0.50) m/s²)
t ≈ 5.49 seconds
(b) To find the distance the first player has run at the instant of collision, we can use the equation s = ut + 0.5at², where s is the displacement, u is the initial velocity, t is the time, and a is the acceleration. Since the first player starts from rest, their initial velocity is 0.
Using the equation:
s = 0 × 5.49 + 0.5 × 0.46 × (5.49)²
s ≈ 37.94 meters
Therefore, at the instant they collide, the first player has run approximately 37.94 meters.
To know more about collision refer here:
https://brainly.com/question/30636941#
#SPJ11
The angle θ is slowly increased. Write an expression for the angle at which the block begins to move in terms of μs.
a. μs = θ
b. θ = μs
c. θ > μs
d. θ < μs
An expression for the angle at which the block begins to move in terms of μs is θ < μs
So, the answer is D.
When the plane is inclined at an angle θ to the horizontal plane, the maximum static frictional force Fs,max is equal to μsN, where N is the normal force exerted by the plane on the object. N = mg cosθ, where m is the mass of the object and g is the acceleration due to gravity
. The maximum static frictional force is equal in magnitude but opposite in direction to the force F, which acts parallel to the plane and tries to push the block down the plane.
Therefore, at the point when the block is just about to move down the plane, the maximum static frictional force Fs,max is equal to F.
Thus, Fs,max = F = mg sinθ ∴ μsN = mg sinθ ⇒ μs mg cosθ = mg sinθ ⇒ μs = tanθ
Therefore, the expression for the angle at which the block begins to move in terms of μs is θ = tan-1(μs).
So, the correct option is d. θ < μs
Learn more about the force at:
https://brainly.com/question/25006421
#SPJ11
The angle θ at which the block begins to move can be written in terms of μs as follows: tan θ = μs,θ = tan−1(μs). Therefore, the answer is d) θ < μs. Static friction is a force that prevents an object from moving when it is in contact with a surface. Hence, the correct answer is option d).
The angle at which the block begins to move can be defined in terms of μs as follows: Option D, θ < μs.Static friction is a force that prevents an object from moving when it is in contact with a surface. Static friction comes into play when a force is applied to an object that is at rest and trying to move. When the force is removed, the static friction disappears. Static friction is greater than kinetic friction, which is the force that opposes motion between two objects in contact that are in motion with respect to each other.
The formula for static friction is Fs ≤ μsN, where Fs is the static friction, μs is the coefficient of static friction, and N is the normal force. For an object to be on the verge of moving, the applied force must equal the maximum force of static friction.
Therefore, the equation becomes: F = Fs = μsNcosθ.As the angle θ is slowly increased, the friction force decreases. When the force that is applied exceeds the maximum force of static friction, the object begins to move. Therefore, the angle θ at which the block begins to move can be written in terms of μs as follows: tan θ = μs,θ = tan−1(μs).Therefore, the answer is θ < μs.
To know more about Static friction, refer
https://brainly.com/question/13680415
#SPJ11
.What is the angular momentum about the axle of the 500g rotating bar in the figure?
B.)If the rod above is in a machine in which the rotating rod hits a spring with a spring constant 50 N/m, how much potential energy will the spring gain and by how much will the spring compress? (assume energy is conserved)
The potential energy gained by the spring is 0.25v₀² J and the spring is compressed by 5 cm. The potential energy gained by the spring is equal to the kinetic energy of the rod before collision.
Substituting the given values, m = 500 g = 0.5 kl = 30 cm = 0.3 m. So, the moment of inertia, I = 0.5 × 0.3²/12= 0.00375 kg m²Next, we need to find the angular velocity. Since the rod completes one full rotation in 0.4 s, the angular velocity, ω = 2π/T, where T is the time period. T = 0.4 s∴ ω = 2π/0.4= 15.7 rad/s. Now, we substitute the values of I and ω in the formula for angular momentum, L = IωL = 0.00375 × 15.7= 0.0589 kg m²/s. Therefore, the angular momentum of the rotating bar about the axle is 0.0589 kg m²/s.2.
Let the velocity of the rotating rod before collision be v₀ and the velocity of the rotating rod and spring after collision be v. The kinetic energy of the rotating rod before collision is given by,K.E. = 1/2 × m × v₀²where,m is the mass of the rotating rod. Since the mass of the rod is 0.5 kg, the kinetic energy before collision is,K.E. = 1/2 × 0.5 × v₀²= 0.25v₀² J. The potential energy gained by the spring is equal to the kinetic energy of the rod before collision. Hence, the potential energy gained by the spring is 0.25v₀² J.
This work is equal to the force exerted by the spring multiplied by the compression of the spring. Hence, we can use this to find the compression of the spring. Let x be the compression of the spring. Then, the force exerted by the spring is given by, F = kx where k is the spring constant. The spring constant is given to be 50 N/m.
Substituting the values in the formula for work done, W = Fx= kx²∴ 0.25v₀² = kx²∴ x² = 0.25v₀²/k∴ x = 0.5v₀/√k. Now, we substitute the value of k to find the compression of the spring. x = 0.5v₀/√50= 0.05v₀ m = 5 cm. Therefore, the potential energy gained by the spring is 0.25v₀² J and the spring is compressed by 5 cm.
To know more about potential energy, refer
https://brainly.com/question/21175118
#SPJ11
18. [-/1 Points] DETAILS If the half-life of nickel-63 is 92 years, approximately how much time will be required to reduce a 1 kg sample to about 1g? years Submit Answer O DELL Q Your best submission
The half-life of Nickel-63 is 92 years. The sample will take approximately 10 half-lives to decay to 1 g, which is equivalent to 920 years
Therefore, we can calculate the amount of time required to reduce a 1 kg sample to about 1g. Half-life of Nickel-63 is 92 years. Thus, the first half-life means half the sample has decayed, leaving half the original amount.
Similarly, the second half-life means half of the remaining half has decayed, leaving a quarter of the original sample. Hence, the fraction of the sample that remains after N half-lives is (1/2)^N, where N is the number of half-lives that have passed.
To find the time to reduce the sample to 1 g from 1 kg, we can apply the following formula for the number of half-lives needed:Mass remaining = initial mass x (1/2)^NHere, the mass remaining is 1 g, and the initial mass is 1 kg.
Hence, we have:1g = 1 kg x (1/2)^N1/1000 = 1/2^Nlog 1/1000 = N log 1/2N = log 1000/log 2N = 9.9658The sample will take approximately 10 half-lives to decay to 1 g, which is equivalent to 920 years.
To know more about half-life refer here:
https://brainly.com/question/4318844#
#SPJ11
calculate the ph of a solution that is 0.26 m hno 2 and 0. 78 m lino 2
A solution of 0.26 M HNO2 and 0.78 M LiNO2 is given.
Let's calculate the pH of this solution. HNO2 is a weak acid, while LiNO2 is a salt of a weak acid.
The overall reaction is:
HNO2 + LiNO2 ⟶ HNO2 + LiNO2 HNO2 is a weak acid that ionizes in water to form H+ ions and NO2- ions:
HNO2 + H2O ⟶ H3O+ + NO2-
The acid dissociation constant (Ka) of HNO2 is 4.5 × 10^-4.
The concentration of the H+ ion in a 0.26 M HNO2 solution is given by the equation:
[tex]Ka = [H+][NO2-]/[HNO2] [H+][/tex]
= Ka [HNO2] / [NO2-] [H+]
= 4.5 × 10^-4 × 0.26 / 0.26
pH = -log[H+]
pH = -log (4.5 × 10^-4)
pH = 3.35
LiNO2 dissociates in water to form Li+ ions and NO2- ions.
LiNO2 ⟶ Li+ + NO2-
The NO2- ions produced in the ionization of HNO2 and LiNO2 combine to form LiNO2. The solution's pH can also be calculated using the equation above.
To learn more about solution visit;
https://brainly.com/question/1616939
#SPJ11
Find the mass m of the counterweight needed to balance a truck with mass M=1340kg on an incline of θ=45° . Assume both pulleys are frictionless and massless.
The mass of the counterweight needed to balance the truck is approximately m = 670 kg.
To balance the truck on the incline, the gravitational forces on both sides of the pulley system must be equal. The gravitational force on the truck is given by F_truck = M * g, where M is the mass of the truck (1340 kg) and g is the acceleration due to gravity.
The gravitational force on the counterweight is given by F_counterweight = m * g, where m is the mass of the counterweight. Since the pulleys are frictionless and massless, the tension in the rope connecting the two sides is the same. Therefore, we can equate the gravitational forces:
M * g = m * g
Simplifying, we find:
m = M / 2 = 1340 kg / 2 = 670 kg.
For more questions like Counterweight click the link below:
https://brainly.com/question/16726341
#SPJ11
What is the frequency of an electromagnetic wave with a wavelength of 17 cm? Express your answer to two significant figures and include the appropriate units
The frequency of an electromagnetic wave with a wavelength of 17 cm is approximately 1.8 × [tex]10^9[/tex] Hz.
Electromagnetic waves are composed of oscillating electric and magnetic fields that propagate through space. The frequency of an electromagnetic wave refers to the number of complete cycles it completes per second, measured in hertz (Hz). The wavelength, on the other hand, represents the distance between two consecutive points in the wave that are in phase.
To calculate the frequency of an electromagnetic wave, we can use the formula:
frequency = speed of light / wavelength
The speed of light in a vacuum is approximately 3.00 × [tex]10^8[/tex] meters per second. However, it is important to convert the given wavelength of 17 cm into meters before applying the formula. One meter is equal to 100 centimeters, so 17 cm is equivalent to 0.17 meters.
Now, we can substitute the values into the formula:
frequency = (3.00 × 10^8 m/s) / (0.17 m)
= 1.8 × 10^9 Hz
Therefore, the frequency of an electromagnetic wave with a wavelength of 17 cm is approximately 1.8 × [tex]10^9[/tex] Hz.
Learn more about Frequency
brainly.com/question/29739263
#SPJ11
