7. What is the name of an element with 3 protons and 5 neutrons?

Answer:

D.) reducing agent

Explanation:

Oxidized chemicals gain electrons. In order to gain these electrons, another chemical must lose electrons. So, the chemical (which will be oxidized) acts as a reducing agent, causing the other chemical to be reduced and lose electrons.

Answer:

d

Explanation:

The + charge of the proton and the - charge of the electron create a electrostic force of attraction ( opposites attract)

Answer:

17.3 g Cr

Explanation:

To find the mass of chromium, you need to (1) convert moles Si to moles Cr (using the mole-to-mole ratio from equation coefficients) and then (2) convert moles Cr to grams Cr (using the atomic mass). It is important to arrange the conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the sig figs of the given value (0.250).

3 Si + 2 Cr₂O₃ ---> 4 Cr + 3 SiO₂
^                              ^

Atomic Mass (Cr): 51.996 g/mol

0.250 moles Si           4 moles Cr            51.996 g
-------------------------  x  --------------------  x  -------------------  =  17.3 g Cr
                                     3 moles Si              1 mole

It follows that the reaction is spontaneous at high temperatures Option A.

The term ΔS is referred to as the change in the entropy of the system. Now recall that entropy is defined as the degree of disorderliness in a system. If a system is highly disorderly then it means that it has a high entropy. Also, ΔH has to do with the heat change that accompanies a reaction.

We know that both the entropy and the heat change can both either be positive or negative. Now we know that the equation ΔG = ΔH - TΔS can be used to ascertain whether or not a reaction will be spontaneous. If the result is negative, then the reaction will be spontaneous.

As such, when then it follows that the reaction is spontaneous at high temperatures Option A.

Learn more about spontaneous reaction:https://brainly.com/question/13790391

#SPJ1

22.37 g of chromium(II) nitrate, must be dissolved to prepare 500. mL of a 0.188 M aqueous solution of the salt.

According to the definition, the molar concentration of a substance in a solution is the ratio of the number of the moles to the volume of the solution:

c=n/V.

The number of the moles is related to the mass with the molar mass:

n=m/M;

m=n·M.

Thus, given the volume of the solution of chromium(II) nitrate, its concentration and molar mass is 238.011 g/mol we can calculate the mass of chromium(II) nitrate needed for the preparation :

∴   Cr(NO₃)₃ = cVM

                 = 0.188 M × 0.5 L × 238.011 g/mol

                 = 22.37 g

Therefore, 22.37 g of chromium(II) nitrate, must be dissolved to prepare 500. mL of a 0.188 M aqueous solution of the salt.

Learn more about molar here:

https://brainly.com/question/837939

#SPJ1

The equilibrium constant for this reaction at 350°C is determined as 5.85.

concentration of bromine, C(Br) = 0.6 mol/1 = 0.6

concentration of iodine, C(I) = 1.6 mol/1 = 1.6

An ICE table is a tabular system of keeping track of changing concentrations in an equilibrium reaction.

ICE is an abbreviation that stands for initial, change, equilibrium.

Create ICE table for the reactants and products formed;

      Br2(g)   +     I2(g)    ↔     2IBr(g)

I     0.6              1.6                 0

C    -1.19            -1.19               1.19

E    0.6 - 1.19      1.6  - 1.19       1.19

E = -0.59           0.41                1.19

The equilibrium constant is calculated as follows;

KC = [IBr]²/[Br][I]

KC = (1.19²) / (0.59 x 0.41)

KC = 5.85

Thus, the equilibrium constant for this reaction at 350°C is determined as 5.85.

Learn more about equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

Answer:

hey I saw this on brainly and thought it will help u..

and this is not my answer I saw u needed help so I screenshot it..

have an amazing day..

and hope this is what ur looking for.

Considering the definition of percentage by mass and density, the percentage by mass of a NaCl solution is 53.917%.

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass= \frac{mass of solute}{mass of solution}x100[/tex]

Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.

In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

In this case, you know:

Replacing in the definition of density, you get the mass of water:

[tex]1 \frac{g}{mL} =\frac{mass of water}{50 mL}[/tex]

Solving:

mass of water= 1 [tex]\frac{g}{mL}[/tex]× 50 mL

mass of water= 50 grams

Then, you get that the mass of solution is calculated as:

mass of solution= mass of solute + mass of water

mass of solution= 58.5 grams + 50 grams

mass of solution= 108.5 grams

So, the percentage by mass is calculated as:

[tex]percentage by mass= \frac{58.5 grams}{108.5 grams}x100[/tex]

percentage by mass= 53.917%

Finally, the percentage by mass of a NaCl solution is 53.917%.

Learn more about percentage by mass:

brainly.com/question/19168984

brainly.com/question/18646836

density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

To being my discussion, I claim that a new atomic model should always build on an old one with the following reasons of mine. That is option B.

An atomic model is a model that describes how the interior of an atom looks like. This first atomic model was developed by William Thomson.

To start my discussion, I claim that a new atomic model should always build on an old one with the following reasons of mine:

Learn more about atoms here:

https://brainly.com/question/3157958

#SPJ1

The following aqueous solutions represents good buffer systems:

A buffer is a solution used to stabilize the pH (acidity) of a liquid.

A good buffer system is generally known to contain close or equal concentrations of a weak acid and its conjugate base.

Based on the above explanation, the following represents a good buffer system as they are between their weak acid and conjugate base:

Learn more about buffer at: https://brainly.com/question/22821585

#SPJ1

Answer:

9.10% dextrose

Explanation:

To find the mass percent, you need to use the following equation:

                               mass (g) of solute
Mass Percent  =  ---------------------------------  x  100%
                              mass (g) of solution

You can plug the given values into the equation and solve to find the mass percent of dextrose. But first, you need to calculate the mass of the solution.

Mass (solute): 25.0 g

Mass (solution): 250.0 g + 25.0 g = 275 g

                                25.0 grams
Mass Percent  =  ------------------------  x  100%
                                 275 grams

Mass Percent  =  0.0909 x 100%

Mass Percent  =  9.10%

A solution of dextrose contains 25.0 g solute in 250.0 g water. 9.10% is the percentage by mass of dextrose in this solution.

A component's concentration in a combination or compound can be expressed as a mass percent, also known as a weight percent. It shows how much of the total mass of the solution or mixture is made up of the solute's (component's) mass. In chemistry, mass percent is frequently employed and stated as a percentage.

Mass Percent  =     mass (g) of solute/       mass (g) of solution x  100%

Mass (solute): 25.0 g

Mass (solution): 250.0 g + 25.0 g = 275 g

Mass Percent  =25.0 grams /    275 grams x  100%

Mass Percent  =  0.0909 x 100%

Mass Percent  =  9.10%

To know more about percentage by mass, here:

https://brainly.com/question/31309409

#SPJ7

Answer:

0.15 M KCl

Explanation:

(Step 1)

Convert the original volume from mL to L. Calculate the moles of the original solution.

75.0 mL / 1,000 = 0.0750 L

Molarity = moles / volume (L)

0.200 M = moles / 0.0750 L

0.0150 = moles

(Step 2)

Convert the final volume from mL to L. Calculate the final molarity.

100. mL / 1,000 = 0.100 L

Molarity = moles / volume (L)

Molarity = 0.0150 moles / 0.100 L

Molarity = 0.15 M

Answer:

65.0 K

Explanation:

To find the temperature, you need to use the Ideal Gas Law:

PV = nRT

In this equation,

-----> P = pressure (pKa)

-----> V = volume (L)

-----> n = moles

-----> R = Ideal Gas Constant (8.31 L*kPa/mol*K)

-----> T = temperature (K)

You can plug the given values into the equation and simplify to find the temperature.

P = 202.65 pKa                          R = 8.31 L*kPa/mol*K

V = 2.0 L                                     T = ? K

n = 0.75 moles

PV = nRT

(202.65 pKa)(2.0 L) = (0.75 moles)(8.31 L*kPa/mol*K)T

405.3 = (6.2325)T

65.0 K = T

C. The heat released when the aluminum is cooled from 70°C to 50°C is -180 J.

Specific heat capacity is the quantity of heat needed to raise the temperature per unit mass.

The heat released when the aluminum is cooled from 70°C to 50°C is calculated as follows;

Q = mcΔθ

where;

Q = (10)(0.9)(50 - 70)

Q = -180 J

Thus, the heat released when the aluminum is cooled from 70°C to 50°C is -180 J.

Learn more about heat capacity here: https://brainly.com/question/16559442

#SPJ1

Sorry for the sloppy writing I tried my best.

If you can't read the words in my photo it says

Evaporation

condensation precipitation and runoff

definition of these words

evaporation: The process of turning liquid into vapor

Condensation:water which collects as droplets on a cold surface when humid air is in contact with

Precipitation: the action or process of precipitating a substance from a solution

runoff: liquid, especially water or rainwater, that flows off or drains away

I hope this is helpful

Sincerely- Your Brainly Bestfriend

The first step in clearing a clogged ballpoint pen is to exert additional pressure when scrawling and drawing vertical lines on paper. If this approach doesn't work, dip the pen's tiny tip in rubbing alcohol. [Only the tidbit] Any dried-up or hardened ink on the tip will dissolve with this.

Answer:

140. J/g*K

Explanation:

To find the specific heat capacity, you need to use the following equation:

Q = mcΔT

In this equation,

-----> Q = energy/heat (J)

-----> m = mass (g)

-----> c = specific heat (J/mole*K)

-----> ΔT = change in temperature (K)

Before you can use the equation above, you need to (1) convert kg to grams, then (2) convert grams to moles (via molar mass), and then (3) convert Celsius to Kelvin. The final answer should have 3 significant figures.

1.11 kg C₄H₈O₂ x 1,000 = 1110 g

Molar Mass (C₄H₈O₂): 4(12.01 g/mol) + 8(1.008 g/mol) + 2(16.00 g/mol)

Molar Mass (C₄H₈O₂): 88.104 g/mol

1110 grams C₄H₈O₂                1 mole
------------------------------  x  -------------------------  =  12.6 moles C₄H₈O₂
                                           88.104 grams

34.5 °C + 273 = 307.5 K

52.3 °C + 273 = 325.3 K

Q = mcΔT                                                                   <----- Equation

3.14 x 10⁴ J = (12.6 moles)c(325.3 K - 307.5 K)         <----- Insert values

3.14 x 10⁴ J = (12.6 moles)c(17.8)                                <----- Subtract

3.14 x 10⁴ J = (224.28)c                                 <----- Multiply 12.6 and 17.8

140. = c                                                         <----- Divide both sides by 224.28

**this answer may be slightly off due to using different molar masses/Kelvin conversions**

Answer:

1.25 M

Explanation:

In this case, the solute is C₆H₁₂O₆ and the solvent is H₂O.To find the molarity, you need to (1) convert the mass C₆H₁₂O₆ to moles (via molar mass), then (2) convert grams H₂O to liters H₂O, and then (3) calculate the molarity.

(Step 1)

Molar Mass (C₆H₁₂O₆): 6(12.011 g/mol) + 12(1.008 g/mol) + 6(15.998 g/mol)

Molar Mass (C₆H₁₂O₆): 180.15 g/mol

18.0 g C₆H₁₂O₆           1 mole
------------------------  x  -----------------  =  0.0999 moles C₆H₁₂O₆
                                   180.15 g

(Step 2)

1,000 grams = 1 L

80.0 g H₂O                1 L
--------------------  x  -------------------  =  0.0800 L H₂O
                                 1,000 g

(Step 3)

Molarity = moles solute / volume solvent (L)

Molarity = 0.0999 moles / 0.0800 L

Molarity = 1.25 M

[tex] \quad \quad\quad\huge \tt{ANSWER}[/tex]

Hydrocarbons are organic compounds which made up of only carbon and hydrogen.

[tex] \pink{ \star}[/tex]Carbon - ( C )

[tex] \pink{ \star}[/tex]Hydrogen - ( H )

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

[tex] \red{✿}[/tex] Type of Hydrocarbon :

[tex] \purple{\mathfrak{llXecretll}}[/tex]

Answer:

Explanation:

Discussion

When Pressure increases  equilibrium shifts to the side with the smallest number of moles. But which side is that?

N2(g) + 3H2(g) ⇌ 2NH3(g)

The left side has 1 mol of nitrogen (N2) and 3 moles of Hydrogen = 4 mols

on the left side.

The right side has 2 mols of NH3 = 2 mols on the right.

Conclusion: You tell the number of mols by the Balance numbers to the left of each chemical in an equation.

Since the left side N2 + 3H2 = 4 mols, the equilibrium does NOT shift left.

2NH3 is only two mols.

The equilibrium shifts Right

Answer

D

Answer:

a) 1

Explanation:

Unfortunately, we are not given the limiting reagent. The limiting reagent is the reactant which is completely used up first. We can identify it by converting both reactants into the product. The reactant which produces the smallest amount of product is the limiting reagent.

You can convert the moles of CO₂/H₂ to moles CH₃OH using the mole-to-mole ratio. This ratio is made up the balanced equation coefficients of the relevant substances.

1 CO₂ + 3 H₂ -----> 1 CH₃OH + H₂O

2 moles CO₂           1 moles CH₃OH
---------------------  x  ----------------------------  =  2 moles CH₃OH
                                    1 mole CO₂

3 moles H₂           1 moles CH₃OH
-------------------  x  ---------------------------  =  1 mole CH₃OH
                                  3 moles H₂

Because H₂ produces the smallest amount of CH₃OH, it is the limiting reagent. This means that all the H₂ is used up before CO₂ runs out. Therefore, the actual amount of CH₃OH produced is 1 mole.

When 2 mol of carbon dioxide and 3 mol of hydrogen, then one mole of methanol will be produced. Therefore, option (a) is correct.

A limiting reagent is a substance or reactant that is completely consumed in the completion of a chemical reaction and is also known as limiting reactant.

When reactants are not present in stoichiometric quantities, the limiting reactant decides the maximum amount of product that can be formed in a chemical reaction from the reactants.

Given the balanced chemical equation of formation of methanol:

CO₂ + 3 H₂  →  CH₃OH  +  H₂O

From the above reaction, we can say that 1 mole of carbon dioxide reacts with three moles of hydrogen gas to form one mole of methanol.

Then, 2mol of carbon dioxide will react with 6 moles of hydrogen gas.

But we have only 3 mol of hydrogen gas therefore, hydrogen gas acts as a limiting reagent that will be consumed first.

Therefore, three moles of hydrogen gas will produce one mole of methanol maximum.

Learn more about limiting reagents, here:

https://brainly.com/question/26905271

#SPJ2

The answer is calcium.

Calcium has the largest atomic radius.

a) physical property

b) chemical change

c) chemical change

d) chemical property

e) physical change

f) physical property

g) physical change

h) physical change

a) Ethanol has a density of 0.697 g/mL shows physical property, b) The solution turns blue upon mixing water and food coloring shows chemical change, c) Wood burns in an oven shows chemical change, d) Methyl alcohol is highly flammable shows chemical property, e) Ice melts in a beaker shows physical change, f) Methyl ethanoate smells like apples shows physical property, g) A car crashes into a wall shows physical change and h) Sugar dissolves in water shows physical change.

A physical change is a transition that modifies a substance's physical characteristics without changing its chemical makeup or identity. The substance's molecules don't change during a physical change; only their arrangement or state does. On the other hand, a chemical change entails the creation of new compounds with chemical properties that differ from the original ones. A entirely new substance is produced as a result of a chemical reaction in which the links between atoms or molecules are broken and new bonds are established.

To know more about physical and chemical change, here:

https://brainly.com/question/23693316

#SPJ7

the correct IUPAC name of the compound is 1-Butanal.

It is a system of naming organic compounds based on the longest carbon-to-carbon single bonds. It does not matter whether these longest chains are continuous or in a ring.

Thus, when the compound with the chemical formula, CH3-CH2-CH2CHO is considered. The longest carbon-to-carbon chain is 4. The 1st carbon carries a functional group known as an aldehyde.

Aldehydes are equipped with the carbonyl group and have the general formula R−CH=O. They are also sometimes referred to as formyl.

Aldehydes are named after their parent alkane chains with a slight modification. The 'e' is replaced with 'al'

The aldehyde in this case has four carbons. This means that the parent alkane is Butane. Therefore, the name of the compound will be 1-Butanal.

More on IUPAC names can be found here: https://brainly.com/question/16631447

#SPJ1

The generic reaction a + b = c, represents a synthesis or combination reaction, which is a kind of chemical reaction.

A synthesis, or combination reaction, is a kind of reaction in which two substances combine to form a bigger molecule.

The generic reaction is:

a + b = c

Some common synthesis reactions are:

Fe + S = FeS

O₂ + 2 SO₂ = 2 SO₃

CaO + CO₂ = CaCO₃

In all the examples above, we can verify that the substances (elements or compounds) combine with each other to form another substance (product).

The generic reaction a + b = c, represents a synthesis or combination reaction, which is a kind of chemical reaction.

Learn more about synthesis reactions here: https://brainly.com/question/16560802

#SPJ1

Hydrochloric Acid would best be described as an Arrhenius and BrØnsted-Lowrey acid.

Hydrochloric Acid HCl(g) is the proton donor and therefore a Brønsted-Lowry acid.

According to Arrhenius theory, hydrochloric acid is an acid which gives hydrogen ions in water but according to Bronsted-Lowry theory, hydrochloric acid is an acid because it donates a proton to the water molecule.

Hydrochloric acid (HCl) cannot be classified as a Lewis acid since it cannot accept an electron pair.

Thus, hydrochloric Acid would best be described as an Arrhenius and BrØnsted-Lowrey acid.

Learn more about Hydrochloric Acid here: https://brainly.com/question/3229358

#SPJ1

Answer:

15 is not a correct scientific measurement.

Explanation:

Is this helpful for You