A 2000kg car is driving north at a steady speed of 80 km/hr (25m/s). The rolling resistance and air friction together is 40000N. The magnitude of the net force is 0 N, and its direction is undefined since there is no net force acting on the car.
To determine the magnitude and direction of the net force acting on the car, we need to consider the forces involved. In this case, the main forces acting on the car are the driving force (which propels the car forward) and the resistive forces (rolling resistance and air friction) that oppose the car's motion.
The resistive forces can be combined into a single force called the resistive force, which has a magnitude of 40000 N and acts in the opposite direction of the car's motion.
The driving force is equal to the resistive force because the car is moving at a steady speed, indicating that the net force is zero (no acceleration).
Therefore, the magnitude of the driving force is also 40000 N, and it acts in the north direction.
The net force is the vector sum of the driving force and the resistive force. Since they have equal magnitudes but opposite directions, the net force will be zero. This means that there is no acceleration or change in velocity.
The car continues to move at a steady speed in the north direction due to the balance between the driving force and the resistive forces.
For more such information on: force
https://brainly.com/question/12785175
#SPJ8
10 pts Question 8 A cannon ball is fired at ground level with a speed of v-30.6 m/s at an angle of 60° to the horizontal (g-9.8 m/s²) How much later does it hit the ground? (Write down the answer fo
A cannon ball is fired at ground level with a speed: The cannonball hits the ground approximately 3.1 seconds later.
To determine how much later the cannonball hits the ground, we need to analyze the projectile motion of the cannonball. We can break the initial velocity into its horizontal and vertical components.
Given that the initial speed (v) of the cannonball is 30.6 m/s and it is fired at an angle of 60° to the horizontal, the initial vertical velocity (vy) can be calculated as v * sin(60°), and the initial horizontal velocity (vx) can be calculated as v * cos(60°).
Using the equation for vertical displacement in projectile motion, h = vy * t + (1/2) * g * t², where h is the vertical displacement (in this case, the cannonball's drop to the ground), vy is the initial vertical velocity, g is the acceleration due to gravity, and t is the time, we can solve for t.
Since the cannonball is fired at ground level, the initial vertical displacement (h) is zero. By substituting the known values into the equation and solving for t, we find:
0 = (v * sin(60°)) * t + (1/2) * g * t²
0 = (30.6 m/s * sin(60°)) * t + (1/2) * (9.8 m/s²) * t²
Simplifying the equation and solving for t, we obtain:
4.9 t² - 15.3 t = 0
Factoring out t, we have:
t(4.9 t - 15.3) = 0
Therefore, t = 0 (which is the initial time) or t = 15.3 / 4.9.
Taking the positive value, t = 3.1 seconds.
Hence, the cannonball hits the ground approximately 3.1 seconds after being fired.
To know more about speed, refer here:
https://brainly.com/question/13263542#
#SPJ11
what is the least restrictive isolation level that will prevent dirty reads?
READ COMMITTED is the least restrictive isolation level that can prevent dirty reads.
The least restrictive isolation level that will prevent dirty reads is the READ COMMITTED isolation level. This level allows only committed data to be read by transactions. If a transaction is updating a row, it locks that row to ensure that other transactions can't read or modify the data until the transaction is completed and the lock is released. This means that dirty reads cannot occur since uncommitted data is not accessible.READ COMMITTED level allows for better concurrency and performance since it doesn't block other transactions from accessing other rows that are not being modified.
In conclusion, READ COMMITTED is the least restrictive isolation level that can prevent dirty reads.
To know more about isolation level visit:
brainly.com/question/30325261
#SPJ11
A projectile is thrown from the top of a tall building with a velocity of 15.0 m/s at an angle of 30.0 degrees above the horizontal. Relative to its starting point, what is the location of the projectile 2.00 seconds later?
The location of the projectile 2.00 seconds later, relative to its starting point, is a horizontal distance of approximately 20.8 m and a vertical distance of approximately -18.7 m.
To determine the location of the projectile, we need to analyze its horizontal and vertical motions separately. The horizontal component of the velocity remains constant throughout the motion, while the vertical component is affected by gravity.
First, let's calculate the horizontal distance traveled by the projectile:
Horizontal distance = Horizontal velocity * Time = (15.0 m/s) * (2.00 s) = 20.08 m
Next, let's calculate the vertical distance traveled by the projectile:
Vertical distance = Initial vertical velocity * Time + (1/2) * Acceleration due to gravity * Time²
Using the given angle of 30.0 degrees, the initial vertical velocity can be calculated as:
Initial vertical velocity = Initial velocity * sin(angle) = (15.0 m/s) * sin(30.0°) = 7.50 m/s
Vertical distance = (7.50 m/s) * (2.00 s) + (1/2) * (-9.81 m/s²) * (2.00 s)²
Vertical distance ≈ -18.7 m
learn more about projectile here:
https://brainly.com/question/14892195
#SPJ11
Consider a motor that exerts a constant torque of 25. 0 n⋅m to a horizontal platform whose moment of inertia is 50. 0 kg⋅m2. Assume that the platform is initially at rest and the torque is applied for 12. 0 rotations. Neglect friction
The angular velocity of the motor after 12 rotations is 12.96 rad/s. The formula to find the angular velocity of the motor is given by ω² - ω₀² = 2αθ.
Given, Torque, T = 25 Nm, Moment of inertia, I = 50 kg m², Number of rotations, n = 12In order to find the angular velocity of the motor, use the formula:
τ = Iα where α is the angular acceleration
Let a be the angular acceleration, then,
25 = 50 × aa
= 25/50a
= 0.5 rad/s²
Now, the formula to find the angular velocity of the motor is given byω² - ω₀² = 2αθ
Where ω is the final angular velocity, ω₀ is the initial angular velocity, θ is the angle traversed
ω₀ = 0 (Initial velocity is 0)
θ = 2πn
= 24π radω² - 0²
= 2 × 0.5 × 24πω
= √(24π) rad/s
Therefore, the angular velocity of the motor after 12 rotations is 12.96 rad/s.
To know more about angular velocity, refer
https://brainly.com/question/29566139
#SPJ11
The angular position of a point on the rim of a rotating wheel is given by _________________
The angular position of a point on the rim of a rotating wheel is given by the angle in radians measured from a reference direction on the axis of rotation of the wheel.
This angle varies with time as the wheel rotates, and it can be calculated using the formula
θ = ωt, where θ is the angular position,
is the angular velocity of the wheel, and t is the time elapsed since the reference position was last passed.
In simpler terms, the angular position of a point on the rim of a rotating wheel can be defined as the angle that the line connecting that point to the center of the wheel makes with a fixed reference line on the axis of the wheel. This angle is measured in radians, and it increases as the wheel rotates.
It's worth noting that this angular position is not to be confused with the linear position of the point on the rim. The linear position is given by the distance from the point to the center of the wheel, and it varies as the wheel rotates. However, the angular position remains constant as long as the wheel rotates at a constant angular velocity.
To know more about angular position, visit:
https://brainly.com/question/31604955
#SPJ11
An electron has de Broglie wavelength 2.75×10−10 m
Determine the magnitude of the electron's momentum pe.
Express your answer in kilogram meters per second to three significant figures.
the magnitude of the electron's momentum is 2.41 × 10⁻²⁵ kg m/s (to three significant figures).
The expression to calculate the magnitude of the electron's momentum is given as:
pe = h/λ
where, pe is the momentum of electron λ is the de Broglie wavelengthh is the Planck's constant
The given de Broglie wavelength is λ = 2.75 × 10⁻¹⁰m.
Planck's constant is given as h = 6.626 × 10⁻³⁴J s.
Substituting the above values in the expression to calculate the magnitude of the electron's momentum, we get:
pe = h/λpe = (6.626 × 10⁻³⁴J s)/(2.75 × 10⁻¹⁰m)pe = 2.41 × 10⁻²⁵ kg m/s
Thus, the magnitude of the electron's momentum is 2.41 × 10⁻²⁵ kg m/s (to three significant figures).
learn more about wavelength here
https://brainly.com/question/10750459
#SPJ11
why grounding of electrical equipment is the primary method of reducing electrical hazards.
Grounding of electrical equipment is the primary method of reducing electrical hazards for several reasons Safety during faults, Voltage stabilization, Surge protection, etc.
Grounding of electrical equipment is the primary method of reducing electrical hazards for several reasons:
Safety during faults: Grounding provides a low-resistance path for electrical current to flow in the event of a fault or electrical malfunction. When a fault occurs, such as a short circuit or equipment failure, excessive current can flow through the grounding system, which helps to quickly and safely divert the current away from people and equipment. This helps prevent electric shocks, electrical fires, and damage to the electrical system.
Voltage stabilization: Grounding helps stabilize the voltage levels in electrical systems. By connecting the electrical equipment to the ground, any excess electrical charge or static electricity can be discharged to the ground, maintaining a stable and safe voltage level throughout the system.
Surge protection: Grounding helps protect electrical equipment from voltage surges caused by lightning strikes, power grid fluctuations, or switching operations. When a surge of high voltage occurs, the excess energy can be safely redirected to the ground through the grounding system, preventing damage to the equipment and reducing the risk of electrical fires.
Equipment protection: Grounding helps protect electrical equipment by providing a reference point for proper operation. It ensures that all equipment components, such as metal cases or enclosures, are at the same potential as the ground, reducing the risk of electric shock when touching the equipment.
EMI/RFI mitigation: Grounding helps mitigate electromagnetic interference (EMI) and radio frequency interference (RFI) by providing a path for unwanted electrical signals to be dissipated into the ground. This helps reduce electrical noise and interference, ensuring proper functioning of sensitive electronic equipment and communication systems.
Overall, grounding is essential for electrical safety as it helps prevent electric shocks, protects equipment, stabilizes voltages, and mitigates electrical hazards. It is a fundamental practice in electrical installations to ensure the safe and reliable operation of electrical systems.
To learn more about electrical equipment click here
https://brainly.com/question/31256244
#SPJ11
.A flywheel with a radius of 0.300m starts from rest and accelerates with a constant angular acceleration of 0.900rad/s2 .
A) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim at the start. (Answers are 0.21,0,0.21 m/s^2)
B) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim after it has turned through 60.0?
C) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim after it has turned through 120?.
A) The magnitude of the tangential acceleration, radial acceleration, and resultant acceleration of a point on the rim at the start are all 0.21 m/s^2.
B) The magnitude of the tangential acceleration at 60.0° can be calculated using the formula: tangential acceleration = radius × angular acceleration. The radial acceleration is 0 since the point is on the rim. The resultant acceleration can be found by using the Pythagorean theorem with tangential and radial accelerations.
C) Similar to part B, the tangential acceleration at 120° can be calculated. The radial acceleration remains 0. The resultant acceleration can be obtained using the Pythagorean theorem.
A) At the start, the tangential acceleration is given by the formula: tangential acceleration = radius × angular acceleration. Since the radius is 0.300 m and the angular acceleration is 0.900 rad/s^2, the tangential acceleration is 0.300 × 0.900 = 0.270 m/s^2. The radial acceleration is 0 since the point is on the rim. The resultant acceleration is the same as the tangential acceleration since there is no radial acceleration. Therefore, the magnitude of the tangential acceleration, radial acceleration, and resultant acceleration at the start is 0.270 m/s^2.
B) To find the tangential acceleration at 60.0°, we use the same formula as in part A. The angle in radians is 60.0° × (π/180) = 1.047 radians. The tangential acceleration is 0.300 × 0.900 = 0.270 m/s^2. The radial acceleration remains 0. The resultant acceleration can be found by using the Pythagorean theorem: resultant acceleration = √(tangential acceleration^2 + radial acceleration^2) = √(0.270^2 + 0^2) = 0.270 m/s^2.
C) Similar to part B, we find the tangential acceleration at 120°. The angle in radians is 120° × (π/180) = 2.094 radians. The tangential acceleration is 0.300 × 0.900 = 0.270 m/s^2. The radial acceleration remains 0. The resultant acceleration is obtained using the Pythagorean theorem: resultant acceleration = √(tangential acceleration^2 + radial acceleration^2) = √(0.270^2 + 0^2) = 0.270 m/s^2.
For more questions like Magnitude click the link below:
https://brainly.com/question/14452091
#SPJ11
the following appear on a physician's intake form. identify the level of measurement: (a) happiness on a scale of 0 to 10 (b) family history of illness (c) age (d) temperature
(a) The level of measurement for "happiness on a scale of 0 to 10" is an interval.
The happiness scale from 0 to 10 represents an interval measurement. The scale has equal intervals between the numbers, but it does not have a true zero point. The absence of happiness (0) does not indicate the complete absence of the attribute being measured. Therefore, it is an interval level of measurement.
(b) The level of measurement for "family history of illness" is nominal.
Family history of illness is a qualitative variable that represents categories or groups. It does not have a numerical order or magnitude. It is simply a classification of whether or not there is a family history of illness. Hence, it is a nominal level of measurement.
(c) The level of measurement for "age" is a ratio.
Age is a quantitative variable that has a meaningful zero point and a numerical order. Ratios between values are also meaningful. For example, someone who is 20 years old is half the age of someone who is 40 years old. Age satisfies all the properties of a ratio level of measurement.
(d) The level of measurement for "temperature" is an interval.
Temperature is a quantitative variable that can be measured on a scale such as Celsius or Fahrenheit. While temperature has equal intervals between the values, it does not have a true zero point (absolute absence of temperature). Therefore, it is an interval level of measurement.
To learn more about magnitude click here
https://brainly.com/question/29766788
#SPJ11
Give the structure of the major product formed in each case when the reactant(s) shown undergo alkene metathesis in the presence of an appropriate ruthenium catalyst.
In alkene metathesis reaction, a ruthenium catalyst is used which is responsible for converting functional group present in one alkene to another functional group. The metathesis reactions occur between different types of alkenes.
In each case, the main product formed will be a cyclic alkene as shown below:
In the first reaction, the two reactants involved are 2-butene and 2-pentene. The alkene metathesis reaction that occurs between the two reactants involves the interchange of the 2 carbon fragments attached to the double bonds to form a 5-carbon alkene and a 4-carbon alkene as shown below:
Here, a cyclic alkene is formed, which is the major product of the reaction.
In the second reaction, the two reactants involved are 2-hexene and 3-octene. The alkene metathesis reaction that occurs between the two reactants involves the interchange of the 2 carbon fragments attached to the double bonds to form a 6-carbon alkene and a 5-carbon alkene as shown below:
Here again, a cyclic alkene is formed, which is the major product of the reaction.
Learn more about metathesis reaction: https://brainly.com/question/30883712
#SPJ11
4 The position of a toy helicopter of mass 9.4 kg is given by a function, fit)-(7.8 m/s (2.9 m/s (4.7 m/k Calculate the velocity of the helicopter in terms of i. 3, and kin 2.2 seconds (Keep it for no
The velocity of the toy helicopter at t = 2.2 seconds is 61.764 m/s.
To calculate the velocity of the toy helicopter, to differentiate the position function with respect to time.
Given the position function:
s(t) = 7.8t - 2.9t² + 4.7t³
To find the velocity, we take the derivative of the position function with respect to time (t):
v(t) = d/dt [7.8t - 2.9t² + 4.7t³]
Using the power rule of differentiation:
v(t) = 7.8 - 2(2.9t) + 3(4.7t²)
v(t) = 7.8 - 5.8t + 14.1t²
Now, to find the velocity at a specific time, we substitute t = 2.2 seconds into the velocity function:
v(2.2) = 7.8 - 5.8(2.2) + 14.1(2.2)²
v(2.2) = 7.8 - 12.76 + 14.1(4.84)
v(2.2) = 7.8 - 12.76 + 66.744
v(2.2) = 61.764 m/s
Therefore, the velocity of the toy helicopter at t = 2.2 seconds is 61.764 m/s.
know more about velocity here:
https://brainly.com/question/80295
#SPJ8
Initial Relative Permability Resistivity Low Low High High C Low High table According to the information i) which material would use for high frequency applications? you Why? (1 sentence) ii) which is
i) The material with high relative permittivity would be suitable for high frequency applications because it can effectively store electric energy in the presence of an electric field.
ii) One metal is copper because it has low resistivity, allowing for efficient conduction of electric current.
iii) The material with high initial relative permeability will give the highest magnetic flux for the smallest magnetic intensity increment.
i) High-frequency applications require materials that can effectively store electric energy in the presence of an electric field. This is achieved by using materials with high relative permittivity. High relative permittivity allows for increased energy storage in the material, making it suitable for high-frequency applications where efficient energy transfer is required.
ii) Copper is widely used as a metal in various applications due to its low resistivity. Low resistivity means that copper can conduct electric current with minimal loss of energy. It offers excellent electrical conductivity, making it a favorable choice for conducting electricity in many industries.
iii) The material with high initial relative permeability will provide the highest magnetic flux for the smallest magnetic intensity increment. Relative permeability is a measure of how easily a material can be magnetized.
A higher initial relative permeability indicates that the material can be easily magnetized, resulting in a larger magnetic flux for a smaller change in magnetic intensity. This property is desirable when maximizing magnetic flux is important, such as in magnetic applications where high efficiency or strong magnetic fields are desired.
To know more about relative permittivity refer here:
https://brainly.com/question/31078718#
#SPJ11
Complete Question:
Initial Relative Permability Resistivity Low Low High High C Low High table According to the information i) which material would use for high frequency applications? you Why? (1 sentence) ii) which is one metal? why? (1 sentence) a iii) which one will give highest magnetic flux for smallest magnetic intensity increament?
The background Submit Answer noise in a room is measured to be 62 dB. How many dB is 1000 times louder? Incorrect. Tries 3/99 Previous Tries
The sound that is 1000 times louder than the background noise in the room has a sound intensity level of 112.5 dB when background noise in a room is measured to be 62 dB.
Decibels (dB) is 1000 times louder, we need to use the formula for calculating sound intensity level or sound pressure level in dB which is given by: Sound intensity level, L = 10 log10(I/I0)where I is the sound intensity in watts per square meter (W/m²) and I0 is the reference sound intensity of [tex]10^{-12}[/tex] W/m² at the threshold of human hearing.
Original sound intensity level (L1) of the background noise in the room is 62 dB. Therefore, the sound intensity (I1) of the background noise is given by:I1 = I0 × [tex]10^{(L1/10} = (10^{-12} {2} -12) × 10^{(62/10)}= 1.58 × 10^{-5}[/tex] W/m²
Sound intensity level (L2) when the sound is 1000 times louder. This can be found by using the sound intensity formula again but with a new intensity (I2) and level (L2):I2 = 1000I1= 1000 × 1.58 × [tex]10^{-5}[/tex]= 0.0158 W/m²L2 = 10 log10(I2/I0)= 10 log10(0.0158/[tex]10^{-12}[/tex])= 112.5 dB
Therefore, the sound that is 1000 times louder than the background noise in the room has a sound intensity level of 112.5 dB.
Know more about sound intensity here:
https://brainly.com/question/32194259
#SPJ11
when light goes from one medium to another medium with a different index of refraction, which of the following do (does) not change?
The frequency, on the other hand, does not change when light passes through media with different refractive indices.
When light goes from one medium to another medium with a different index of refraction, the frequency of light does not change.The frequency of light remains constant when light goes from one medium to another medium with a different index of refraction.
The index of refraction is a measure of how much a ray of light bends as it passes from one medium to another. The speed of light changes as it passes through media with different refractive indices, and the direction of the light ray is altered in response to this change in speed.
The frequency, on the other hand, does not change when light passes through media with different refractive indices.
Learn more about frequency
brainly.com/question/29739263
#SPJ11
The displacement of a car moving with constant velocity 9.5 m/s in time interval between 3 seconds to 5 seconds is given by odt. What is the displacement of the car during that interval in meters?
The displacement of a car moving with a constant velocity of 9.5 m/s in a time interval between 3 seconds to 5 seconds is 19 meters.
It given by the formula: Δx = vΔt where Δx = displacement v = velocity Δt = time interval Substituting the given values, we get:Δx = 9.5 m/s × (5 s - 3 s)Δx = 9.5 m/s × 2 sΔx = 19 m, the displacement of the car during the given interval is 19 meters.
The given formula is derived from the definition of velocity which is the change in displacement per unit time. Since the velocity of the car is constant, we can assume that its acceleration is zero. Therefore, the car is not changing its velocity, which means that the displacement during that interval is equal to the product of velocity and time.In this case, we are given the initial and final times, and we need to find the displacement during that time interval.
The difference between the two times is 2 seconds. Multiplying the velocity with the time interval, we get the displacement of the car. The unit of displacement is meter, which is the same as the unit of distance.
Know more about displacement here:
https://brainly.com/question/29769926
#SPJ11
I need quick help please
Please clearly show formulas used and work
question:
A car and a motorbike are having a race. The car has an
acceleration from rest of 5.6 m/s2
until it reaches its maximum sp
The car with an acceleration of 5.6 m/s² reaches its maximum speed of 100 m/s in approximately 17.86 seconds.
In the race between a car and a motorbike, the car has an acceleration from rest of 5.6 m/s² until it reaches its maximum speed.
The acceleration refers to the rate at which the car's velocity increases over time. Assuming the car starts from rest, it will gradually pick up speed at a constant rate of 5.6 m/s² until it reaches its maximum velocity.
The time it takes for the car to reach its maximum speed depends on the initial velocity and the acceleration. If we assume the initial velocity of the car is 0 m/s, we can use the formula:
v = u + at
Where:
v = final velocity (maximum speed)
u = initial velocity (0 m/s)
a = acceleration (5.6 m/s²)
t = time
Rearranging the equation, we have:
t = (v - u) / a
Assuming the maximum speed of the car is v = 100 m/s, we can calculate the time it takes to reach that speed:
t = (100 m/s - 0 m/s) / 5.6 m/s²
t = 17.86 seconds
Therefore, it would take approximately 17.86 seconds for the car to reach its maximum speed of 100 m/s with an acceleration of 5.6 m/s².
To know more about acceleration refer here:
https://brainly.com/question/30816250#
#SPJ11
Suppose that you have an electron moving with speed comparable to the speed of light in a circular orbit of radius r in a large region of uniform magnetic field B. (a) What must be the relativistic momentum P of the electron? (b) Now the uniform magnetic field begins to increase with time: B= Bo + bt where b and Bo are positive constants. In one orbit, how much does the energy of the electron increase, assuming that in one orbit the radius doesn't change very much? (This effect was exploited in the "betatron," an electron accelerator invented in the 1940 s.
The work done by the magnetic field in one orbit is: [tex]W = ΔU= -m(b)r[/tex]Now, the kinetic energy gained by the electron in one orbit is given by: KE = W. Therefore,[tex]KE = -m(b)r[/tex]. The kinetic energy gained by the electron in one orbit is -m(b)r.
a) Relativistic momentum of an electron:Relativistic momentum can be determined using the given formula:
m = (γ) moLet’s put the given values into the above equation.
The speed of light = c
Radius of orbit = r
Magnetic field = B
Now, we need to calculate the momentum. Therefore, we use the following formula:
[tex]p = mv[/tex]
Using this formula, we get:
[tex]p = (γ) mo c[/tex]
Therefore, the momentum of the electron is p = (γ) mo c.b) Energy gained by an electron:Given data:
Radius of orbit = r
Magnetic field = [tex]B= Bo + bt[/tex] (where b and Bo are positive constants)
The expression for the force on an electron moving perpendicular to a magnetic field is given by
:[tex]F = Bqv[/tex]
Where v is the velocity of the electron and q is its charge. Here, the direction of the force is perpendicular to both the velocity and the magnetic field.
As the magnetic field increases, the force on the electron will increase. The electron will spiral outwards. However, the energy of the electron remains constant.
This means that the kinetic energy of the electron must increase as its velocity increases, in order to maintain the radius of the circular path. The kinetic energy gained by the electron in one orbit can be calculated as follows: KE = work done by the magnetic field on the electron
The work done on the electron by the magnetic field is given by the change in magnetic potential energy. The magnetic potential energy is given by:[tex]U = -mB[/tex]
The negative sign is due to the fact that the electron has a negative charge. As the magnetic field increases, the magnetic potential energy of the electron increases. The change in magnetic potential energy is given by:ΔU = -mΔB
Substituting the value of magnetic field, we get:
[tex]ΔU = -m(b)r[/tex]
Therefore, the work done by the magnetic field in one orbit is:
[tex]W = ΔU= -m(b)r[/tex]
Now, the kinetic energy gained by the electron in one orbit is given by:KE = W
Therefore,[tex]KE = -m(b)r[/tex]
The kinetic energy gained by the electron in one orbit is -m(b)r.
To learn more about work visit;
https://brainly.com/question/18094932
#SPJ11
the two 10-cm-long parallel wires in the figure are separated by 5.0 mm. for what value of the resistor
The value of the resistor depends on the value of the resistivity of the wires used. For example, if the resistivity of the wires is 2.00×10⁻⁸ ohm-meters, then the resistance of the parallel wire would be:R = 2.00×10⁻⁸ ohm-meters × 1270.88 = 0.0255 ohms. Therefore, the value of the resistor for the given parallel wires would be 0.0255 ohms.
The question involves a problem about parallel wires separated by a distance of 5.0 mm. To find the resistor for a given length of parallel wires, we need to know the value of the resistivity of the wires. We can use the formula to find the value of the resistor. Resistivity (ρ) is a property of materials that tells us how well a material can conduct electricity. It is measured in ohm-meters (Ω.m).The formula for the resistance (R) of a wire with resistivity (ρ), length (L), and cross-sectional area (A) is given by:R = ρ(L/A)where R is the resistance in ohms, ρ is the resistivity in ohm-meters, L is the length of the wire in meters, and A is the cross-sectional area in square meters.Now, we have to determine the resistance of a parallel wire by using the given values. The length of the wire (L) is 10 cm = 0.1 m. The distance between the wires (d) is 5.0 mm = 0.005 m. The cross-sectional area (A) of the wire can be calculated by using the diameter of the wire (d) as follows:A = π(d/2)² = π(0.001/2)² = 7.854×10⁻⁷ m². Now, we can substitute these values into the formula for the resistance of the parallel wire:R = ρ(L/A) = ρ(0.1/7.854×10⁻⁷) = ρ(1270.88)The value of the resistor depends on the value of the resistivity of the wires used. For example, if the resistivity of the wires is 2.00×10⁻⁸ ohm-meters, then the resistance of the parallel wire would be:R = 2.00×10⁻⁸ ohm-meters × 1270.88 = 0.0255 ohms. Therefore, the value of the resistor for the given parallel wires would be 0.0255 ohms.
To know more about resistivity visit :
brainly.com/question/29427458
#SPJ11
If a spring constant is 40 N/m and an object hanging from it stretches it 0.50 m, what is the mass of the object? What is the period of the oscillation when the spring is set into motion?
The period of oscillation of the spring when it is set into motion is 0.808 s.
Given, the spring constant k = 40 N/m
The displacement of the spring Δx = 0.50 m
We have to calculate the mass of the object hung from the spring and the period of oscillation of the spring when it is set into motion.
We know that the force exerted by a spring is given as, `F = -k Δx` Here, F is the restoring force, k is the spring constant and Δx is the displacement of the spring.
Substituting the values,`F = -40 × 0.50 = -20 N`
The negative sign indicates that the direction of the force is opposite to the direction of displacement.
To find the mass of the object, we will use the following formula,`F = ma`
Here, F is the net force acting on the object, m is the mass of the object and a is the acceleration of the object.
Let the mass of the object be m, then,`-20 = m × 9.8` ⇒ `m = 2.04 kg`
Therefore, the mass of the object is 2.04 kg.
Now, we have to calculate the period of oscillation of the spring when it is set into motion.
The time period of a mass spring system is given as,`T = 2π √(m/k)`
Here, T is the period of oscillation, m is the mass of the object and k is the spring constant.
Substituting the values,`T = 2π √(2.04/40)` ⇒ `T = 0.808 s`
Therefore, the period of oscillation of the spring when it is set into motion is 0.808 s.
Learn more about period of oscillation
brainly.com/question/30763550
#SPJ11
a triangle has a base of 9 feet and a height of 12 feet. what is the area of the triangle? responses 42 ft2 42 ft, 2 54 ft2 54 ft, 2 84 ft2 84 ft, 2 108 ft2
A triangle has a base of 9 feet and a height of 12 feet. The area of that triangle will be got as 54 ft².
When we know the base and height of the triangle, we can find out the area of the triangle by using the formula of the area of a triangle. The area of a triangle formula is A = 1/2 × base × height.
The base of the triangle is given as 9 feet and the height is 12 feet. Substituting the values into the formula,
A = 1/2 × base × height = 1/2 × 9 × 12 = 54 ft²
Therefore, the area of the triangle is 54 square feet.
Area of triangle = 1/2 × b × h
Here, the base of the triangle is 9 feet and the height is 12 feet.
Area of triangle = 1/2 × 9 × 12 = 54 ft².
Hence, the answer is 54 ft².
Learn more about finding out area here:
https://brainly.com/question/27683633
#SPJ11
When the temperature is reduced from 25 degrees C to 10 degrees C, the value of Kw for the dissociation of water into ions changes from 10^-14 to 2.9^-15. This result implies that the dissociation of water is.... Endothermic or Exothermic?
The dissociation of water is endothermic.
Kw is the product of concentration of hydrogen ions
[H⁺] and concentration of hydroxide ions [OH-].
Kw = [H⁺][OH⁻]
When the temperature is reduced from 25 degrees C to 10 degrees C, the value of Kw for the dissociation of water into ions changes from 10^-14 to 2.9^-15.
According to Le-Chatelier’s principle, when temperature is reduced, the equilibrium will shift in such a way as to counteract the effect of the change, and equilibrium constant will also change.
As the value of Kw decreases with decrease in temperature, it means that the equilibrium constant of the dissociation of water is decreasing. It happens due to decrease in concentration of hydrogen ions or hydroxide ions or both. As the value of Kw decreases with decrease in temperature, it implies that dissociation of water is endothermic.
Therefore, it can be concluded that the dissociation of water is endothermic.
To know more about endothermic, visit:
https://brainly.com/question/11902331
#SPJ11
multimode fiber is capable of longer transmission distances than single mode fiber.
The given statement "multimode fiber is capable of longer transmission distances than single mode fiber" is incorrect. The multimode fiber is not capable of longer transmission distances than single mode fiber.
What is single mode fiber?
Single mode fiber is the type of fiber optic cable that carries light directly down the fiber. The core diameter of single mode fiber is much smaller than that of multimode fiber. The small core reduces the dispersion of light. Single mode fiber can be used to transmit data over longer distances than multimode fiber because it has a lower attenuation rate.
What is multimode fiber?
Multimode fiber is the type of fiber optic cable that carries light down the fiber in many modes. In multimode fiber, the diameter of the core is large and is measured in 50 to 100 microns. Multimode fiber is used for short-distance communication. The data transmission rate is slower, but the larger core allows for a higher bandwidth than single mode fiber.Multimode fiber is less expensive than single mode fiber, but it has a shorter transmission distance. In contrast, single mode fiber is more expensive but offers longer transmission distances due to its low attenuation rate.
to know more about multimode fiber visit:
https://brainly.com/question/20459294
#SPJ11
when a light beam emerges from water into air, the average light speed does not change increases decreases
When a light beam emerges from water into air, the speed of light changes, and the average light speed increases.In physics, the speed of light is usually denoted by "c."The speed of light in a vacuum is constant and is approximately 299,792,458 meters per second.
The speed of light changes as it passes through different media like water or air.When light travels from one medium to another, its speed and direction change. When light passes from one medium to another, it is bent or refracted. The amount of bending is determined by the relative refractive index of the two media.Light travels faster in air than in water, so the speed of light changes as it passes from water to air. Light travels slower in water because the particles in water are closer together than in air. Therefore, when a light beam emerges from water into air, the average light speed does not decrease, but it increases.Also, note that the average speed of light is the total distance that light travels divided by the time it takes to travel that distance. The average speed of light in a medium is the speed of light multiplied by the refractive index of the medium. It is usually measured in meters per second.The average speed of light in a vacuum is 299,792,458 meters per second, while the average speed of light in water is approximately 225,000,000 meters per second. Therefore, light travels slower in water than in a vacuum.
For more information on light beam visit:
brainly.com/question/21441738
#SPJ11
You place a 7.49-mm-high chocolate chip on the axis of and 10.9 cm from a lens with focal length 6.11 cm. If it can be determined, is the chocolate chip\'s image real or virtual? -Real -Cannot Be Determined -Virtual How high is the image (expressed as a positive quantitiy)? _____ mm If it can be determined, is the image upright or inverted with respect to the real thing? -Cannot be determined -upright -inverted
The chocolate chip's image will be Virtual. Its height is 4.03 mm. The image's orientation upright or inverted cannot be determined.
A 7.49-mm-high chocolate chip is placed on the axis of and 10.9 cm from a lens with a focal length of 6.11 cm. To determine whether the image is real or virtual, we will use the lens formula which is given as:
1/v - 1/u = 1/f
where v = image distance u = object distance f = focal length.
Given that object distance (u) = 10.9 cm - 6.11 cm
= 4.79 cm or 0.0479 m
Focal length (f) = 6.11 cm or 0.0611 m.
Plugging these values into the lens formula, we get:
1/v = 1/0.0611 - 1/0.0479.
Solving this equation gives us v = - 0.058 cm or - 0.00058 m, which is a negative value. Therefore, the image will be virtual.
To determine the height of the image, we will use the magnification formula which is given as m = v/u. Since u is positive and v is negative, the magnification will be negative as well, which means that the image will be inverted.
Given that the object height is 7.49 mm, we can find the height of the image as magnification = height of image/height of object -0.058/0.0479 = - 1.212.
Therefore, the height of the image is 7.49 mm × 1.212 = 9.09 mm, which is positive. Thus, the height of the image is 9.09 mm.
Learn more about magnification here:
https://brainly.com/question/31464706
#SPJ11
what are the direction and magnitude of the force on the particle if it is moving away from the wire?
The direction and magnitude of the force on a particle moving away from a wire will depend on the electrical charge of the wire, the charge of the particle, and the distance between the two objects.
let's consider a few scenarios that might help illustrate what could happen. First, suppose the wire is negatively charged, and the particle is positively charged. If the particle is moving away from the wire, the force on the particle will be directed towards the wire, opposite the direction of motion.
The magnitude of this force will depend on the distance between the wire and the particle, as well as the charges on each object and the strength of the electric field. If the particle is moving towards the wire, the force on the particle will be directed towards the wire, in the direction of motion.
Again, the magnitude of the force will depend on the distance between the wire and the particle, as well as the charges on each object and the strength of the electric field. Overall, the direction and magnitude of the force on a particle moving away from a wire will depend on the electrical charge of the wire, the charge of the particle, and the distance between the two objects.
Learn more about direction of motion.
brainly.com/question/14636041
#SPJ11
What is the momentum of a garbage truck that is 1.20 × 10 4 kg
and is moving at 35 m/s? p = Correct units kg*m/s Correct At what
speed would an 8.5 kg trash can have the same momentum as the
truck?
The trash can would need to be moving at a speed of approximately 4.94 × 10⁴ m/s to have the same momentum as the garbage truck.
The momentum (p) of an object is calculated by multiplying its mass (m) by its velocity (v). Therefore, the momentum can be expressed as:
p = m * v
Given that the garbage truck has a mass of 1.20 × 10⁴ kg and is moving at 35 m/s, we can calculate its momentum as:
p_truck = (1.20 × 10⁴ kg) * (35 m/s)
Calculating the product:
p_truck = 4.2 × 10⁵ kg·m/s
Now, we need to find the speed at which an 8.5 kg trash can would have the same momentum as the truck. Let's denote this speed as v_can.
Using the momentum formula, we can write:
p_can = (8.5 kg) * v_can
Since we want the momentum of the trash can to be equal to the momentum of the truck, we can set up the equation:
p_truck = p_can
Substituting the values:
4.2 × 10⁵ kg·m/s = (8.5 kg) * v_can
Solving for v_can:
v_can = (4.2 × 10⁵ kg·m/s) / (8.5 kg)
Calculating the division:
v_can = 4.94 × 10⁴ m/s
To learn more about momentum refer here:
https://brainly.com/question/24030570#
#SPJ11
how do you know the mass of an aquious solution without water
Aqueous solutions are mixtures that have water as a solvent. So, if we want to determine the mass of an aqueous solution without water, we can simply subtract the mass of the water from the total mass of the solution.
To determine the mass of an aqueous solution without water, follow these steps:1. Determine the total mass of the solution. This can be done by weighing the container that holds the solution on a scale.2.
Remove the water from the solution. This can be done by heating the solution to evaporate the water or by using a process such as distillation.3. Weigh the container again to determine the mass of the solution without water.
To know more about Aqueous solutions visit :-
https://brainly.com/question/31271307
#SPJ11
what is the change in internal energy (in j) of a system that releases 675 j of thermal energy to its surroundings and has 9.70 × 102 cal of work done on it? give your answer in scientific notation.
Asper the given question the change in internal energy (in J) of a system that releases 675 J of thermal energy to its surroundings and has 9.70 × 10² cal of work done on it is -3.38 × 10³ J.
Given data:
System releases = 675 J of thermal energy
Work done on the system = 9.70 × 10² cal
= 9.70 × 10² x 4.18 J/cal (1 cal = 4.18 J)
Change in Internal Energy = ΔU
We know that,
ΔU = Q - W Where, Q = Heat added to the system and
W = work done by the system
ΔU = (675 J) - (9.70 × 10² x 4.18 J)
ΔU = (675 J) - (4.06 x 10³ J)
ΔU = -3.38 × 10³ J
Answer:
Thus, the change in internal energy (in J) of a system that releases 675 J of thermal energy to its surroundings and has 9.70 × 10² cal of work done on it is -3.38 × 10³ J.
To know more about internal energy visit :
https://brainly.com/question/11278589
#SPJ11
in three to five complete sentences, explain why the magnetic north pole is not always in the same spot on different maps. remember to use proper grammar and mechanics when writing your sentences.
The magnetic north pole is not always in the same spot on different maps due to the phenomenon known as magnetic declination. Magnetic declination is the angle between true north (geographic north) and magnetic north.
It arises from the Earth's magnetic field, which is not perfectly aligned with the geographic axis. The magnetic field is dynamic and can change over time, causing the magnetic north pole to shift its location. Therefore, as the magnetic north pole moves, the magnetic declination changes, resulting in variations in its position on different maps.
To know more about declination visit :
https://brainly.com/question/29110417
#SPJ11
Which of the following is NOT an NGO? a) CARE b) Red Cross c) UNICEF d) World Vision e) Oxfam
Option c) UNICEF is not an NGO, while options a) CARE, b) Red Cross, d) World Vision, and e) Oxfam are all NGOs.
Which of the following is NOT an NGO?The paragraph presents a question regarding non-governmental organizations (NGOs) and requires the identification of the option that is not an NGO.
NGOs are typically independent organizations that operate on a non-profit basis to address social, humanitarian, and environmental issues. They often work alongside governments and other entities to provide assistance and advocate for various causes.
Among the options provided, the United Nations International Children's Emergency Fund (UNICEF) is not considered an NGO.
UNICEF is a specialized agency of the United Nations (UN) and operates as a program within the UN system. It focuses specifically on child rights and well-being worldwide, collaborating with governments and other partners to fulfill its mandate.
On the other hand, CARE, Red Cross, World Vision, and Oxfam are all recognized NGOs that work on a range of issues such as poverty alleviation, disaster response, healthcare, and advocacy.
Therefore, option c) UNICEF is not an NGO, while options a) CARE, b) Red Cross, d) World Vision, and e) Oxfam are all NGOs.
Learn more about NGO
brainly.com/question/30092509
#SPJ11
