the half-reaction occurring at the cathode in the balanced reaction shown below is ________. 3mno4- (aq) 24h (aq) 5fe (s) → 3mn2 (aq) 5fe3 (aq) 12h2o (l)

Answers

Answer 1

The balanced equation for the given half-reaction occurring at the cathode is shown below:3MnO4-(aq) + 24H+(aq) + 5Fe2+(aq) → 3Mn2+(aq) + 5Fe3+(aq) + 12H2O(l).

The half-reaction that is occurring at the cathode is given below:5Fe2+(aq) → 5Fe3+(aq) + 5eExplanation:The oxidation state of iron (Fe) in this reaction increases from +2 to +3, which shows that Fe has undergone oxidation, which means that the electrons are lost.

In other words, the cathode in this reaction is a reducing agent that gains electrons to reduce a metal ion to its elemental form. Fe2+ is the metal ion, which gained electrons to reduce to Fe3+. The half-reaction at the cathode shows the reduction of Fe2+ to Fe3+ when 5 electrons are gained per Fe2+ ion. The cathode's half-reaction.

To know more about half-reaction visit:

https://brainly.com/question/18403544

#SPJ11


Related Questions

A solution of urea in water has a boiling point of 100.18oC. Calculate the freezing point of the solution. (Kf for water is 1.86 K kg mol^-1 and Kb for water is 0.512 K kg mol1).

Answers

the freezing point of the urea solution is -0.6552°C.

The formula for freezing point depression can be used to calculate the freezing point of the solution:

ΔTf = Kf × m

Where ΔTf is the change in the freezing point, Kf is the freezing point depression constant, and m is the molality of the solution. We can use the relationship between molality, mass, and molar mass to find the molality of the solution:m = (moles of solute) / (mass of solvent in kg)Since we know the mass of the solvent (water), we can use the boiling point elevation to find the moles of solute (urea).

ΔTb = Kb × mΔTb = 100.18 - 100 = 0.18 K0.18 = 0.512 × mmm = 0.352 mol/kg

The molality can be used to calculate the freezing point depression:

ΔTf = Kf × mΔTf = 1.86 K kg mol^-1 × 0.352 mol/kg

ΔTf = 0.6552 K

Since the freezing point is lowered by this amount, we can find the freezing point of the solution by subtracting this value from the freezing point of pure water:

Freezing point of solution = 0°C - ΔTf = 0°C - 0.6552 K = -0.6552°C

Therefore, the freezing point of the urea solution is -0.6552°C.

learn more about freezing point here

https://brainly.com/question/31357864

#SPJ11

determine the velocity of point on the rim of the gear at the instant shown.

Answers

The velocity of a point on the rim of a gear can be determined by multiplying the angular velocity of the gear by the radius of the gear. The angular velocity of a gear is the speed at which it rotates in radians per second. We can use the following formula to calculate

the velocity of a point on the rim of a gear at any given time :v = rωLong The velocity of a point on the rim of a gear is determined by the angular velocity and the radius of the gear. The angular velocity of a gear is the speed at which it rotates in radians per second. We can use the following formula to calculate the velocity of a point on the rim of a gear at any given time:v = rωwhere v is the velocity of the point on the rim of the gear, r is the radius of the gear, and ω is the angular velocity of the gear.To find the angular velocity of the gear, we need to first find the angular displacement of the gear. The angular displacement is the change in the angle of the gear over a given time interval. We can use the following formula to calculate the angular displacement:θ = ωtwhere θ is the angular displacement of the gear, ω is the angular velocity of the gear, and t is the time interval.

To find the angular velocity of the gear, we can rearrange the formula to get:ω = θ/t Now, we can plug in the values we know into the formula to get the angular velocity of the gear:ω = 60/3ω = 20 rad/s Finally, we can use the formula:v = rωto find the velocity of a point on the rim of the gear at the instant shown. We know that the radius of the gear is 0.2 m, so we can plug that in along with the angular velocity we just calculated v = rωv = 0.2 x 20v = 4 m/s he velocity of a point on the rim of a gear is equal to the product of the angular velocity and the radius of the gear. In order to find the angular velocity of the gear, we first need to find the angular displacement over a given time interval. We can then use the formula for angular velocity to find the angular velocity of the gear. Finally, we can use the formula for velocity to find the velocity of a point on the rim of the gear at the instant shown.

To know more about determined Visit;

https://brainly.com/question/12089834

#SPJ11

what products are formed when each acetal is hydrolzed with aqueous acid

Answers

When each acetal is hydrolyzed with aqueous acid, reaction  the main answer is that the products formed are an aldehyde or a ketone, as well as an alcohol. Here's an

:An acetal is a functional group with the structure R1R2C(OR3)2, where R1, R2, and R3 can be either hydrogen atoms or organic functional groups. Hydrolysis of an acetal with aqueous acid involves the breaking of the carbon-oxygen bond of the OR3 group, resulting in the formation of an aldehyde or ketone, as well as an alcohol.

The reaction mechanism of acetal hydrolysis is nucleophilic substitution, whereby a water molecule attacks the carbon atom of the acetal group, leading to the formation of an intermediate that undergoes hydrolysis. The overall reaction can be represented as: R1R2C(OR3)2 + H2O ⟶ R1R2COH + R3OHHere, R1R2C(OR3)2 represents the acetal, and R1R2COH and R3OH represent the aldehyde or ketone and alcohol products, respectively.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

In an aqueous solution of a certain acid with pKa = 4.60 the pH is 3.16. Calculate the percent of the acid that is dissociated in this solution. Round your answer to 2 significant digits

Answers

Approximately 3.98% of the acid is dissociated in this solution.

To calculate the percent of the acid that is dissociated in the solution, we can use the Henderson-Hasselbalch equation:

pH = pKa + log ([A-]/[HA])

Given that the pKa of the acid is 4.60 and the pH of the solution is 3.16, we can rearrange the equation as follows:

3.16 = 4.60 + log ([A-]/[HA])

Subtracting 4.60 from both sides of the equation, we get:

-1.44 = log ([A-]/[HA])

To eliminate the logarithm, we can convert the equation into exponential form:

10^(-1.44) = [A-]/[HA]

Solving for [A-]/[HA], we find:

[A-]/[HA] = 0.0398

To express this ratio as a percentage, we multiply it by 100:

[A-]/[HA] = 3.98%

Therefore, approximately 3.98% of the acid is dissociated in this solution.

To know more about acid visit:

https://brainly.com/question/27915098

#SPJ11

the rate constant for a second-order reaction is 0.54 m-1s-1. what is the half-life of this reaction if the initial concentration is 0.27 m?

Answers

Substituting these values in the formula for t1/2, we get:t1/2 = 1 / k[A]0= 1 / (0.54 m-1s-1 × 0.27 m)= 6.1 sTherefore, the half-life of the reaction is 6.1 s.

The half-life of a second-order reaction can be calculated using the formula t1/2 = 1 / k[A]0, where k is the rate constant, [A]0 is the initial concentration of reactant, and t1/2 is the time taken for the concentration of reactant to reduce to half of its initial value.Given:k = 0.54 m-1s-1[A]0 = 0.27 mSubstituting these values in the formula for t1/2, we get:t1/2 = 1 / k[A]0= 1 / (0.54 m-1s-1 × 0.27 m)= 6.1 s

The half-life of a second-order reaction can be calculated using the formula t1/2 = 1 / k[A]0, where k is the rate constant, [A]0 is the initial concentration of reactant, and t1/2 is the time taken for the concentration of reactant to reduce to half of its initial value.

To know more about reaction visit:-

https://brainly.com/question/30464598

#SPJ11

Consider the following reaction where Kc = 1.80E-2 at 698 K: 2 HI(g) H2(g) + I2(g) A reaction mixture was found to contain 0.283 moles of HI(g), 2.18E-2 moles of H2(g), and 4.17E-2 moles of I2(g), in a 1.00 liter container. Is the reaction at equilibrium? If not, what direction must it run in order to reach equilibrium? The reaction quotient, Qc = . The reaction: A. must run in the forward direction to reach equilibrium. B. must run in the reverse direction to reach equilibrium. C. is at equilibrium.

Answers

The reaction is not at equilibrium. In order to reach equilibrium, the reaction must run in the forward direction, i.e., in the direction of the reactants. The answer is (A) must run in the forward direction to reach equilibrium.

The initial concentrations of the given reaction are:

[HI] = 0.283 M[H2] = 2.18 × 10⁻² M[I2] = 4.17 × 10⁻² M

Here, the reaction quotient is calculated by plugging in the initial concentrations. Then, the value of Qc is:

Qc = [H2][I2]/[HI]² Qc = (2.18 × 10⁻²) (4.17 × 10⁻²)/0.283²

Qc = 1.19

Now, we compare the value of Qc with the equilibrium constant value, Kc. If Qc > Kc, the reaction quotient is greater than the equilibrium constant. Hence, the reaction is not at equilibrium. In such a case, the reaction must run in the forward direction to reach equilibrium. If Qc < Kc, the reaction quotient is less than the equilibrium constant. Hence, the reaction is not at equilibrium. In such a case, the reaction must run in the reverse direction to reach equilibrium. If Qc = Kc, the reaction quotient is equal to the equilibrium constant. Hence, the reaction is at equilibrium. Here, Qc = 1.19 and Kc = 1.80 × 10⁻², Qc is greater than Kc. So, the reaction is not at equilibrium. In order to reach equilibrium, the reaction must run in the forward direction, i.e., in the direction of the reactants. The answer is (A) must run in the forward direction to reach equilibrium.

To know more about reactants visit: https://brainly.com/question/30129541

#SPJ11

write a balanced chemical equation for when solutions of sodium phosphate and copper (ii) sulfate are combined. identify the solid precipitate product. what type of reaction is this?

Answers

The balanced chemical equation for the reaction between sodium phosphate (Na3PO4) and copper (II) sulfate (CuSO4) is as follows:

3Na3PO4 + 2CuSO4 → Cu3(PO4)2 + 3Na2SO4

This reaction is a double displacement or precipitation reaction.

In this reaction, a precipitate of copper(II) phosphate (Cu3(PO4)2) is formed. Copper(II) phosphate is a solid that is insoluble in water, which causes it to precipitate out of the solution.

This reaction is a double displacement or precipitation reaction. It involves the exchange of ions between the two compounds to form a solid precipitate and soluble salts. The sodium and copper ions swap partners to form sodium sulfate (Na2SO4) and copper(II) phosphate (Cu3(PO4)2), respectively.

Therefore,

The balanced chemical equation for the reaction between sodium phosphate (Na3PO4) and copper (II) sulfate (CuSO4) is as follows:

3Na3PO4 + 2CuSO4 → Cu3(PO4)2 + 3Na2SO4

This reaction is a double displacement or precipitation reaction.

To know more about sodium visit :

https://brainly.com/question/25597694

#SPJ11

las Scanned with CamScanner Which of the following statements are true regarding the use of indicators in selective media? they may react with a product from a biochemical reaction to produce a color change. they are used as substrates for the biochemical test. they provide a visible change in the media indicating a reaction. they often indicate whether an acid or base has been produced. they are selected based on their functional pH range to indicate a color change.

Answers

The following statements are true regarding the use of indicators in selective media: they provide a visible change in the media indicating a reaction.

They often indicate whether an acid or base has been produced they may react with a product from a biochemical reaction to produce a color change. Indicators are substances that change color based on their response to an alteration in pH, such as the presence of acidic or basic components. Indicators are used in selective media to reveal the presence of the required organisms. The use of indicators in selective media has several benefits.

When the organism grows in a selective medium that has been supplemented with an indicator, the presence of the organism is immediately apparent because the indicator undergoes a color change as a result of the metabolic activity of the organism.

To know more about indicators visit:-

https://brainly.com/question/29016702

#SPJ11

calculate the standard entropy change for the reaction at 25 °c. standard molar entropy values can be found in this table. c3h8(g) 5o2(g)⟶3co2(g) 4h2o(g) δ∘rxn= 165.7 j/k

Answers

The standard entropy change for the given reaction at 25 °C is 107.9 J/K mol.

The standard entropy change for the given reaction at 25 °C needs to be calculated. The standard molar entropy values are provided in the table given below: Substance S° (J/K mol)C3H8(g) 269.9O2(g) 205.0CO2(g) 213.6H2O(g) 188.8The balanced chemical reaction is given as:C3H8(g) + 5O2(g) ⟶ 3CO2(g) + 4H2O(g).

The equation shows that 3 moles of CO2(g) and 4 moles of H2O(g) are formed by the combustion of 1 mole of C3H8(g). Therefore, the standard entropy change of the given reaction at 25 °C can be calculated as follows:ΔS°rxn = [3S°(CO2(g)) + 4S°(H2O(g))] - [S°(C3H8(g)) + 5S°(O2(g))]ΔS°rxn = [3(213.6 J/K mol) + 4(188.8 J/K mol)] - [269.9 J/K mol + 5(205.0 J/K mol)] ΔS°rxn = 107.9 J/K mol.

To know more about entropy visit:

https://brainly.com/question/20166134

#SPJ11

Hydrogen chloride and oxygen react to form water and chlorine, like this: 4HCI (g)+02(g) → 2H2O(g)+2Cl2(g) Suppose a mixture of HCI, O2, H20 and Cl2 has come to equilibrium in a closed reaction vessel. Predict what change, if any, the perturbations in the table below will cause in the composition of the mixture in the vessel. Also decide whether the equilibrium shifts to the right or left perturbation change in composition shift in equilibrium to the right to the left (none) The pressure of HCI will Some 02 is added The pressure of H20 ? to the right to the left (none) The pressure of HCI will Some Cl2 is removed The pressure of O2 will? to the right to the left (none) The pressure of H20 ? The volume of the vessel is reduced The pressure of Cl2 will

Answers

The equilibrium of the reaction between hydrogen chloride and oxygen to form water and chlorine is as follows:4HCI(g) + 02(g) → 2H2O(g) + 2Cl2(g)In the table below, the following perturbations and their respective effects on the reaction have been given.

Perturbation Change in composition Shift in equilibriumThe pressure of HCI Decreases to the leftIncreases to the rightSome O2 is addedIncreases to the rightDecreases to the leftThe pressure of H2ONo effectNo effectSome Cl2 is removedDecreases to the leftIncreases to the rightThe pressure of O2No effectNo effectThe volume of the vessel is reducedIncreases to the rightDecreases to the leftThe pressure of Cl2Increases to the rightDecreases to the leftEXPLANATIONThe equilibrium of the reaction can be shifted either to the left or to the right depending on the perturbation applied to the system.

The perturbations in the table are given with their respective effects and equilibrium shifts.The table shows that the perturbation in which the pressure of HCI decreases, causes the equilibrium to shift to the left, while the increase of the pressure of HCI shifts the equilibrium to the right.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

Which items correctly complete the following statment A catalyst can act in a chemical reaction to: (I) increase the equilibrium constant. (II) lower the activation energy. (III) decrease the enthalpy for tine reaction. (IV) provide a new path for the reaction. II \& IV I \& II II \& III I \& III

Answers

A catalyst can act in a chemical reaction to lower the activation energy and provide a new path for the reaction. The correct items that complete the statement are II & IV.

In chemistry, a catalyst is a substance that accelerates the rate of a chemical reaction. It is not a reactant, and it is not consumed during the reaction. A catalyst can act in a chemical reaction to lower the activation energy and provide a new path for the reaction. It is a substance that speeds up the rate of a reaction by providing an alternative pathway for the reaction that has a lower activation energy.

The role of the catalyst is to lower the activation energy, which is the energy that must be supplied to the reactants to initiate the chemical reaction. A lower activation energy means that a greater proportion of reactant molecules have sufficient energy to react when they collide.

To know more about catalyst  visit:-

https://brainly.com/question/24430084

#SPJ11

fill in the blank .For the reaction given below, ΔH0 = −1516 kJ at 25°C and ΔS0 = −432.8 J/K at 25°C. This reaction is spontaneous ____. SiH4(g) + 2O2(g) → SiO2(s) + 2H2O

Answers

the reaction is spontaneous since ΔG0 is negative.

The standard Gibbs free energy change for the reaction given below, and the values of ΔH0 and ΔS0 are:ΔH0 = −1516 kJ at 25°CΔS0 = −432.8 J/K at 25°C.SiH4(g) + 2O2(g) → SiO2(s) + 2H2O

To calculate whether this reaction is spontaneous or not, we can use Gibbs free energy equation.ΔG0 = ΔH0 - TΔS0Where,ΔG0 = Gibbs free energy change.

ΔH0 = Enthalpy change.ΔS0 = Entropy change.

T = Temperature.Substituting the given values into the equation,

we get;

ΔG0 = ΔH0 - TΔS0ΔG0 = -1516 x 1000 J/mol - (25+273)K x (-432.8) J/K/mol

ΔG0 = -1516 x 1000 J/mol + 25 x 432.8 J/molΔG0 = -12850 J/mol

We can conclude that the reaction is spontaneous since ΔG0 is negative.

learn more about Gibbs free energy here

https://brainly.com/question/9179942

#SPJ11

The molecular formula C5H10 can refer to which of the following molecules?Cyclopentane1-pentene2-penteneAll of the above

Answers

The molecular formula C5H10 can refer to which of the following molecules: Cyclopentane, 1-pentene, 2-pentene.All of the above is the correct option among the given options above.

Each carbon atom of the molecule should form four covalent bonds with other atoms. Hydrogen atoms, which can form only one bond, will have to attach to carbon atoms. The molecular formula C5H10 can refer to which of the following molecules: Cyclopentane, 1-pentene, 2-pentene.All of the above is the correct option among the given options above.

As a result, the number of hydrogen atoms bonded to each carbon atom determines the molecule's structure.There are three different structural isomers with a molecular formula of C5H10: pentene isomers (1-pentene and 2-pentene) and cyclopentane.

To know more about molecular formula visit :

https://brainly.com/question/28647690

#SPJ11

for 511 nm visible light, calculate its frequency (, hz), wavenumber (˜, cm−1), and photon energy (j).

Answers

a. The frequency  for visible light of 511 nm is 5.87 x 10¹⁴ Hz.

b. The wave number is 1.957 x 10³ cm⁻¹.

c. the photon energy is 3.89 x 10⁻¹⁹ J.

To determine the frequency the wavelength of visible light, we know that the speed of light (c) is given:

byc = λν

where λ is the wavelength and ν is the frequency of the light.

So, frequency,

ν = c/λ

= (3.0 x 10⁸ m/s) / (511 x 10⁻⁹ m)

ν = 5.87 x 10¹⁴ Hz

Wave number (˜) is the reciprocal of the wavelength (λ). Therefore, ˜ is given by;

˜ = 1/λ

= 1 / 511 x 10⁻⁹ m

= 1.957 x 10³ cm⁻¹

Photon energy (E) of a photon of light is given by;

E = hν

where h is the Planck's constant = 6.63 x 10⁻³⁴ J⋅s

E = hν

= 6.63 x 10⁻³⁴ J⋅s × 5.87 x 10¹⁴ Hz

E = 3.89 x 10⁻¹⁹ J

Learn more about visible light: https://brainly.com/question/7977348

#SPJ11

The frequency for 511 nm visible light is 5.87 × 10¹⁴ Hz, the wave number is 1.957 × 10³ cm⁻¹, and the photon energy is 3.89 × 10⁻¹⁹ J.

To find the frequency of the wavelength of visible light, it is required that the speed of light (c) is given by:

c = λν

In which

λ =  wavelength

ν = the frequency of the light

So, the frequency is,

[tex]v = \frac{c}{\lambda}[/tex]

= [tex]\rm (3.0 \times 10^8 \ m/s) / (511 \times 10^-^9 m)[/tex]

[tex]v = 5.87 \times 10^1^4 \ Hz[/tex]

The reciprocal of wavelength is the wave number. Consequently, is provided by;

= [tex]\frac{1}{\lambda}[/tex]

= [tex]\frac{1}{511 \times 10^-^9\ m}[/tex]

= 1.957 × 10³ cm⁻¹

Photon energy (E) of a photon of light is given by;

E = hν

In which h is the Planck's constant:

= 6.63 × 10⁻³⁴ J⋅s

E = hν

= 6.63 x 10⁻³⁴ J⋅s × 5.87 × 10¹⁴ Hz

E = 3.89 x 10⁻¹⁹ J

Thus, the frequency for 511 nm visible light is 5.87 × 10¹⁴ Hz, the wave number is 1.957 × 10³ cm⁻¹, and the photon energy is 3.89 × 10⁻¹⁹ J.

Learn more about frequency, here:

https://brainly.com/question/32803910

#SPJ4

1- consider the tube stabbed with the sterile inoculating needle
a- is this positive or negative control
b- what information is provided by the sterile stabbed tube?
2- why is it important to carefully insert and remove the needle along the same tab line ?
3- consider the TTC indicator.
a- why is it essential that reduced TTC be insoluble?
b- why is there less concern about the solubility of the oxidized form of TTC?

Answers

Given bellow are the answers to the above questions related to sterile inoculating needle:

1- Consider the tube stabbed with the sterile inoculating needle:

a) It is a negative control.

b) The sterile stabbed tube provides information about any contamination that may have been picked up in the process of transferring the inoculum to the test tube.

2- It is important to carefully insert and remove the needle along the same tab line to avoid dragging microorganisms up and down the needle track, which can result in cross-contamination and a false positive result.

3- Consider the TTC indicator.

a) It is essential that reduced TTC be insoluble because the insoluble form is the only form that can be detected. Insoluble TTC forms a visible red precipitate that indicates bacterial growth.

b) There is less concern about the solubility of the oxidized form of TTC because it does not provide an accurate indication of bacterial growth. The oxidized form is soluble in water, and its color is indistinguishable from the color of the medium.

To know more about inoculating visit:

https://brainly.com/question/32615538

#SPJ11

what is the mass in grams of 1.553 cmol( ) of sodium (na ), where cmol( ) is the moles of charge due to the ion?

Answers

The given substance is sodium (Na) which has a molar mass of 22.98976928 g/mol. We can use this information along with the given value of cmol to find the mass of the substance in grams.

Therefore, the mass in grams of 1.553 cmol of sodium (Na) is 34.92 g.Explanation:To calculate the mass in grams of 1.553 cmol of sodium (Na), we can use the following formula:Mass = Molar mass × Number of moles (n)The given value of 1.553 cmol can be converted to moles by dividing it by the charge of the sodium ion (Na+) which is +1.

Therefore,1.553 cmol Na+ = 1.553 mol Na+To find the molar mass of sodium (Na), we look it up on the periodic table which is 22.98976928 g/mol.Molar mass (M) of Na = 22.98976928 g/molUsing the formula above, we can now calculate the mass of 1.553 cmol of sodium (Na).Mass = 22.98976928 g/mol × 1.553 mol= 34.92 gTherefore, the mass in grams of 1.553 cmol of sodium (Na) is 34.92 g (main answer).

To know more about sodium  visit:
https://brainly.com/question/30878702

#SPJ11

the reactant side of a balanced chemical equation is shown below. al2(so4)3 3cl2 → how many chlorine atoms should there be on the product side in the equation?

Answers

There should be a total of 6 chlorine atoms on the product side of the equation Al₂ (SO₄ )₃ + 3Cl₂. This is determined by multiplying the coefficient (3) in front of Cl₂  by the number of chlorine atoms in one molecule of Cl₂  (2).

How many chlorine atoms produced?

In the given balanced chemical equation, Al₂ (SO₄ )₃ + 3Cl₂ →, we are asked to determine the number of chlorine atoms on the product side of the equation.

The coefficient in front of Cl₂  on the reactant side is 3, which indicates that three molecules of chlorine gas (Cl₂ ) are involved in the reaction. Each molecule of chlorine gas consists of two chlorine atoms (Cl-Cl).

Therefore, to calculate the total number of chlorine atoms on the product side, we multiply the coefficient (3) by the number of chlorine atoms in one molecule of Cl₂  (2).

3 (coefficient) × 2 (chlorine atoms per molecule of Cl₂ ) = 6 chlorine atoms.

Hence, there should be a total of 6 chlorine atoms on the product side of the balanced chemical equation. This calculation is based on the law of conservation of mass, which states that the number of atoms of each element must be the same on both sides of a balanced chemical equation.

Learn more about chlorine atoms

brainly.com/question/28846612

#SPJ11

What characteristic properties do buffered solutions possess?(Select all that apply.)
a,Abuffered solution is one that has a decrease of pH when a strongacid or base is added to it.
b.Asolution is buffered by the presence of the combination of a weakacid and its conjugate base.
c,Abuffered solution is one that resists the change in its pH evenwhen a strong acid or base is added to it.
d.Asolution is buffered by the presence of the combination of a strongacid and its conjugate base.
e.Abuffered solution is one that has an increase of pH when a strongacid or base is added to it.

Answers

Buffered solutions possess the following characteristic properties:Solution is buffered by the presence of the combination of a weak acid and its conjugate base.A buffered solution is one that resists the change in its pH even when a strong acid or base is added to it.

There are a number of qualities that buffered solutions have that make them unique. Buffered solutions have a pH that is resistant to change when small amounts of an acid or base are added to it. A buffered solution consists of a weak acid and its conjugate base, which act together to resist changes in the pH of the solution.The ability of a solution to resist changes in pH is known as buffering, which is a characteristic property of buffers. A buffered solution has a greater ability to maintain a relatively constant pH, which is essential in various biological, chemical, and environmental processes.The combination of a weak acid and its conjugate base is necessary for buffering because it can absorb both H+ and OH- ions without affecting the pH of the solution. If a strong acid is added to a buffered solution, the weak acid neutralizes the H+ ions. If a strong base is added to the buffered solution, the conjugate base neutralizes the OH- ions. Hence, options (a), (d) and (e) are incorrect. Thus, the correct options are: Solution is buffered by the presence of the combination of a weak acid and its conjugate base.A buffered solution is one that resists the change in its pH even when a strong acid or base is added to it.

For more information on Buffered solutions visit:

brainly.com/question/31367305

#SPJ11

A lightweight metallic raceway without threads is called ? in the National Electrical Code.
Select one:
a. Electrical Metallic Tubing
b. Reinforced Thermosetting Resin Conduit
c. Rigid Metal Conduit
d. Rigid Polyvinyl Chloride Conduit

Answers

A lightweight metallic raceway without threads is called Electrical Metallic Tubing in the National Electrical Code. The correct option is A.  Electrical Metallic Tubing

In electrical and mechanical engineering, a conduit is a pipe or tube designed to hold and route electrical cables or wires. It is generally made of metal, plastic, or fiber and can be rigid or flexible. It is a lightweight metallic raceway without threads called Electrical Metallic Tubing in the National Electrical Code.

is used as an alternative to conduit piping, allowing for quicker installation and adjustment. EMT is used to protect wires from mechanical damage and to prevent the spread of fire. It's also used to keep wire bundles safe in walls, ceilings, and floors and to distribute electricity from a junction box to the rest of a building

To know more about Electrical Code visit:-

https://brainly.com/question/18829138

#SPJ11

Balance the following redox reaction in acidic solution
S2O3²- (aq) + Cl2 (g) -----> SO4²-(aq) + Cl-(aq)

Answers

The balanced redox reaction in acidic solution is:[tex]S_2O_3^2^-(aq) + 4H^+ (aq) + 2Cl_2 (g)[/tex] → [tex]2Cl^- (aq) + SO_4^2^- (aq) + 2H_2O (l)[/tex]

The oxidation number of [tex]S_2O_3^2^-[/tex] (aq) is +2, whereas the oxidation number of [tex]SO_4^2^- (aq[/tex])is +6. Chlorine ([tex]Cl_2[/tex]) is oxidized to [tex]Cl^-[/tex] (aq) with the oxidation number varying from 0 to -1. Sulfur, on the other hand, is reduced from an oxidation number of +2 to +6. The oxidation half-reaction is as follows:

[tex]S_2O_3^2^-(aq)[/tex]→[tex]SO_4^2^- (aq[/tex])

The reduction half-reaction is as follows:

2Cl2 (g) → 4H+ (aq) + 2Cl- (aq)

We'll match the number of electrons in both equations. For this, the oxidation reaction must be multiplied by two, resulting in:

[tex]S_2O_3^2^-(aq)[/tex] →2  [tex]SO_4^2^- (aq[/tex]) + 2e-

The reduction reaction, on the other hand, needs to be multiplied by two, resulting in:

[tex]4H^+ (aq) + 2Cl_2[/tex] (g) → [tex]2Cl^- (aq) + Cl^- (aq) + 2e^-[/tex]

Therefore, The final equation is obtained by adding these two half-reactions:[tex]S_2O_3^2^-(aq) + 4H^+ (aq) + 2Cl_2 (g)[/tex] → [tex]2Cl^- (aq) + SO_4^2^- (aq) + 2H_2O (l)[/tex].

To know more about redox reaction refer here :

https://brainly.com/question/21851295

#SPJ11

what is lowest energy chair conformation for cis-1,4-dichlorocyclohexane?

Answers

The lowest energy chair conformation for cis-1,4-dichlorocyclohexane is shown below: Chair conformation is a shape that is often adopted by cyclohexane and its derivatives when they have a substituent on each carbon atom. Cis-1,4-dichlorocyclohexane is one of the cyclic compounds that adopt the chair conformation, where each carbon atom is surrounded by three carbon atoms and one substituent.

The lowest energy chair conformation for cis-1,4-dichlorocyclohexane is shown below:Lowest energy chair conformation for cis-1,4-dichlorocyclohexaneAs a result, the substituents on the chair conformation of cis-1,4-dichlorocyclohexane are trans to one another. The trans substituents, on the other hand, must be axial to each other.

To know more about cyclohexane visit:

https://brainly.com/question/30230108

#SPJ11

For the following reaction, 35.0 grams of zinc oxide are allowed to react with 6.85 grams of water . zinc oxide (s) + water (I) ⟶ zinc hydroxide ( aq ) What is the maximum amount of zinc hydroxide that can be formed? grams What is the FORMULA for the limiting reagent? What amount of the excess reagent remains after the reaction is complete?

Answers

10.63 grams of ZnO remain after the reaction is complete.

The balanced chemical equation for the reaction between zinc oxide and water is:

ZnO(s) + H2O(l) → Zn(OH)2(aq)

No. of moles of ZnO = Mass of ZnO / Molar mass of ZnO= 35.0 g / 65.38 g/mol= 0.535 moles of ZnO

The amount of water is given as 6.85 g

The molar mass of water is:H2O = 18.02 g/mol

No. of moles of H2O = Mass of H2O / Molar mass of H2O= 6.85 g / 18.02 g/mol= 0.380 moles of H2O

Now, we need to find out the limiting reagent.

.No. of moles of Zn(OH)2 formed from 0.535 moles of ZnO = 0.535 molesNo. of moles of Zn(OH)2 formed from 0.380 moles of H2O = 0.380 moles

Therefore, since the amount of ZnO (0.535 moles) is greater than the amount of H2O (0.380 moles), H2O is the limiting reagent and ZnO is the excess reagent.

The maximum amount of Zn(OH)2 that can be formed is given by the amount of ZnO that reacts with H2O, which is 0.380 moles.

No. of grams of Zn(OH)2 = No. of moles of Zn(OH)2 × Molar mass of Zn(OH)2= 0.380 mol × (97.41 g/mol)= 37.08 gThe formula for the limiting reagent is H2O. The amount of excess reagent remaining after the reaction is complete can be calculated by subtracting the amount of limiting reagent used from the initial amount of excess reagent

.Initial amount of excess reagent (ZnO) = 35.0 g

No. of moles of ZnO = Mass of ZnO / Molar mass of ZnO= 35.0 g / 65.38 g/mol= 0.535 moles of ZnO

Amount of ZnO used in the reaction = No. of moles of Zn(OH)2 formed × Ratio of ZnO to Zn(OH)2= 0.380 mol × (1 mol ZnO / 1 mol Zn(OH)2)= 0.380 moles of ZnO used

Amount of ZnO remaining after the reaction = Initial amount of ZnO − Amount of ZnO used= 35.0 g − (0.380 mol × 65.38 g/mol)= 10.63 g

Therefore, 10.63 grams of ZnO remain after the reaction is complete.

learn more about zinc oxide here

https://brainly.com/question/30765370

#SPJ11

when 100.0 ml of 0.40 m of ch3cooh and 50.0 ml of 0.40 m of naoh are mixed, the resulting mixture is _____________.

Answers

The resulting mixture is a buffer. A buffer is an aqueous solution that can resist changes in pH when small amounts of an acid or base are added to it. A buffer solution is created by combining a weak acid acetic acid and its salt with a strong base sodium hydroxide, sodium acetate.

According to the given statement,100.0 ml of 0.40 m of CH3COOH acetic acid and 50.0 ml of 0.40 m of NaOH sodium hydroxide are mixed. Both acetic acid and sodium hydroxide are of equal concentrations, i.e. 0.40 M. Since acetic acid is a weak acid and sodium hydroxide is a strong base, the resulting solution will be slightly basic. The reaction that occurs between acetic acid and sodium hydroxide is CH3COOH(aq) + NaOH(aq) → CH3COONa(aq) + H2O(l).

This reaction produces sodium acetate and water. The conjugate acid base pair in the buffer solution is CH3COOH/CH3COO-. Because this buffer has a weak acid and its salt, it will resist changes in pH when acid or base is added to it. The resulting mixture is a buffer. This solution will have a pH greater than 7, which means it will be slightly basic.

To know more about acid visit:

https://brainly.com/question/29796621

#SPJ11

What mass of lithium chloride is found in 85 g of a 25% by mass solution? Find the mass percent composition of Br in CuBr_2 A 4.56 g sugar cube (Sucrose: C_12 H_33O_11) is dissolved in a 350, mi teacup of 80 degree C water. What is the mass percent composition of the sugar solution? Given: Density of water at 80 degree C = 0.975 g/ml Fill in the chart below using the information provided.

Answers

Given Mass = 85 concentration = 25% by mass. Mass % = (Mass of solute / Mass of solution) × 100%Therefore,Mass of solute = Mass % × Mass of solution / 100%We have Mass % and Mass of solution.

So, we can find the Mass of solute. Mass of lithium chloride = 25% × 85 g / 100% = 21.25 therefore, 21.25 g of lithium chloride is found in 85 g of a 25% by mass solution. Given CuBr2Mass of Br in CuBr2 = 2 × Atomic mass of Br = 2 × 79.904 = 159.808 gMass % composition of Br = (Mass of Br / Molecular mass of CuBr2) × 100%Molecular mass of CuBr2 = Atomic mass of Cu + Atomic mass of 2Br = 63.546 + 2 × 79.904 = 223.354 g/molars % composition of Br = (159.808 / 223.354) × 100% = 71.53%Given Mass of Sucrose = 4.56 volume of water = 350 density of water = 0.975 g/temperature of water = 80°CWe can use the below formula to calculate the mass % composition of the sugar solution.

Mass % composition = (Mass of solute / Mass of solution) × 100%Mass of water = Volume of water × Density of water = 350 ml × 0.975 g/ml = 341.25 gMass of solute = Mass of Sucrose = 4.56 gMass of solution = Mass of Sucrose + Mass of water = 4.56 g + 341.25 g = 345.81 gMass % composition = (4.56 / 345.81) × 100% = 1.32%The table is: | Properties   | LiCl          | CuBr2          | Sugar Solution | |---------------|---------------|----------------|----------------| | Mass          | 21.25 g       | -              | 4.56 g         | | Mass %        | -             | 71.53%         | 1.32%          | | Molecular Mass| -             | 223.354 g/mol  | -              |

Read more about Molecular mass here;https://brainly.com/question/837939

#SPJ11

how many grams of copper will be plated out by a current of 2.3 a applied for 25 minutes to a 0.50 m solution of copper (ii) sulfate?

Answers

The mass of copper that will be plated out by a current of 2.3 A applied for 25 minutes to a 0.50 M solution of copper(II) sulfate is 0.190 g.

The mass of copper can be calculated using Faraday's law as follows:

Mass of copper = n × M × z

where n is the number of moles of electrons transferred, M is the molar mass of copper, and z is the number of electrons per copper ion.

To find z, we need to know the formula of copper sulfate. Copper(II) sulfate has the formula CuSO₄. Each copper ion carries two positive charges (Cu²⁺), so z = 2.

Molar mass of CuSO₄ = 63.55 + 32.06 + 4(16.00) = 159.61 g/mol

Mass of copper = n × M × z = 0.000596 mol × 159.61 g/mol × 2 = 0.190 g

Learn more about molar mass at:

https://brainly.com/question/31959514

#SPJ11

The mass of copper that will be plated out by a current of 2.3 A applied for 25 minutes to a 0.50 m solution of copper (II) sulfate is 0.935 grams (to the nearest thousandth).

First of all, let's list down the given values;

The current, I = 2.3 A

The time of the experiment, t = 25 minutes = 1500 seconds

The concentration of copper (II) sulfate solution, C = 0.50 m

Now, let's calculate the amount of electricity that was passed through the solution;

I = Q/t,

where Q = quantity of electricity passed

.2.3 = Q/1500Q = 2.3 × 1500Q = 3450 C

The number of moles of CuSO4 in the solution can be calculated as;

C = n/V0.50 = n/1000n = 0.0005 mol

The number of moles of Cu deposited will be equal to the number of electrons that pass through the cell, which can be calculated by;

n = Q/Fn = 3450/96500n = 0.0357 moles

The number of moles of Cu deposited is 0.0357 moles and the molar mass of Cu is 63.5 g/mol.

Therefore, the mass of copper that will be plated out is;

Mass = n × Molar mass

Mass = 0.0357 × 63.5

Mass = 2.27 grams

But, this is the theoretical value, in actual experiments, due to loss of electricity due to polarization, mass is always less. A commonly observed ratio is 95% for copper electrodeposition.

So, the mass of copper that will be plated out will be 0.95 × 2.27 grams = 0.935 grams.

To know more about sulfate visit:

https://brainly.com/question/30201446

#SPJ11

assuming complete dissociation, what is the ph of a 3.67 mg/l ba(oh)2 solution?

Answers

With complete dissociation, the pH of 3.67 mg/L [tex]Ba(OH)_2[/tex] solution is will be 12.63.

pH

First, let's calculate the concentration of OH- ions in the solution:

Ba(OH)2 is present at 3.67 mg/L. Since the molar mass of Ba(OH)2 is 171.34 g/mol, we can convert the concentration to moles per liter (mol/L):

3.67 mg/L / 171.34 g/mol = 0.0214 mmol/L (millimoles per liter)

Since Ba(OH)2 dissociates into 2 OH- ions, the concentration of OH- ions is twice that of Ba(OH)2:

0.0214 mmol/L * 2 = 0.0428 mmol/L

To find the pOH of the solution, we can take the negative logarithm (base 10) of the OH- ion concentration:

pOH = -log10(0.0428) ≈ 1.37

Now, to find the pH, we can use the relation:

pH + pOH = 14

pH + 1.37 = 14

pH ≈ 14 - 1.37

pH ≈ 12.63

Therefore, the pH of the Ba(OH)2 solution is approximately 12.63.

More on pH can be found here: https://brainly.com/question/2288405

#SPJ4

Zn2+(aq)+2e−→Zn(s)
Identify the anode and cathode when plating an iron nail with zinc.
Options:
Zinc is the anode and iron is the cathode.
Iron is the anode and zinc is the cathode.
Zinc acts as both the anode and cathode.
Iron acts as both the anode and cathode.

Answers

The correct option is: Zinc is the anode and iron is the cathode.

In the given reaction, Zn2+(aq) + 2e− → Zn(s), zinc ions (Zn2+) are being reduced to zinc metal (Zn) by gaining electrons. The electrons are supplied by the anode, which is the electrode where oxidation occurs. Therefore, in the process of plating an iron nail with zinc, the zinc electrode will act as the anode.

On the other hand, the iron nail is being plated with zinc, so it is gaining zinc ions and being reduced. The electrode where reduction occurs is called the cathode. Hence, in this process, the iron nail will act as the cathode.

Therefore, the correct option is: Zinc is the anode and iron is the cathode.

To know more about anode visit:

https://brainly.com/question/17109743

#SPJ11

Cu2+(aq) + 2e- ⇒ Cu(s) Eº = 0.34 V

Cr3+(aq) + e- ⇒ Cr2+(aq) Eº = -0.41 V

According to the half-reactions represented above, which of the following occurs in aqueous solutions under standard conditions?

a. Cu2+(aq) + Cr3+(aq) ⇒ Cu(s) + Cr2+(aq)
b. Cu2+(aq) + 2Cr2+(aq) ⇒ Cu(s) + 2Cr3+(aq)
c. Cu(s) + 2Cr3+(aq) ⇒ Cu2+(aq) + 2Cr2+(aq)
d. Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq)
e. 2Cu2+(aq) + Cr3+(aq) ⇒ 2Cu(s) + Cr2+(aq)

Answers

The correct option is d. Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq).

Standard conditions refer to a temperature of 298 K and a pressure of 1 atm. The standard reduction potential Eº is the tendency of an element or compound to be reduced and therefore acts as a measure of the oxidizing or reducing power of the substance. In a redox reaction, one element is oxidized while the other is reduced. Electrons are transferred between the species in a redox reaction. An oxidizing agent oxidizes the other element while reducing itself, while a reducing agent reduces the other element while oxidizing itself. We must compare the standard reduction potentials of the two half-reactions.

A positive value of Eº shows that a reduction reaction will occur, while a negative value indicates that an oxidation reaction will occur. In this case, we have the following half reactions:
Cu2+(aq) + 2e-  ⇒ Cu(s) Eº = 0.34 V
Cr3+(aq) + e-  ⇒ Cr2+(aq) Eº = -0.41 V
We see that Cu2+ has a greater reduction potential than Cr3+. As a result, the Cu2+ ion will act as an oxidizing agent, whereas the Cr3+ ion will act as a reducing agent. When Cu2+ and Cr3+ are mixed, the following redox reaction will occur: Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq)Hence, the correct answer is d. Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq).

To know more about redox reaction refer to:

https://brainly.com/question/1161855

#SPJ11

draw the molecular orbital diagram to determine which of the following is paramagnetic.

Answers

Molecular Orbital (MO) theory Molecular Orbital (MO) theory is the basis for understanding chemical bonding in metal coordination compounds, organic molecules, and some inorganic compounds.

The MO theory conceptually follows the VB theory, which combines atomic orbitals (AOs) from each atom in a molecule into valence bond orbitals (VBOs) that have some electron density between them and help explain bond strength. MO theory, on the other hand, combines all of the molecular orbitals (MOs) from every atom in a molecule into a series of molecular orbitals that describe the distribution of electrons over the whole molecule. The number of MOs generated is the same as the number of AOs combined. The following are the molecular orbitals generated from the combination of s-orbitals: σs, the bonding MO, and σs*, the antibonding MO.

It's a bit more complicated than H2 because O2 has more electrons. In the MO diagram, we start by placing the atomic orbitals from each atom on opposite sides and mixing them to generate molecular orbitals. The electrons fill the molecular orbitals from the bottom up, and Hund's rule dictates that each orbital must be filled with one electron before any can hold a second electron. The diagram above is for O2, which is paramagnetic since it has two unpaired electrons in its antibonding pi orbitals. Consequently, O2 is easily attracted into magnetic fields.

To know more about Hund's rule visit

https://brainly.com/question/12646067

#SPJ11

What concentration of SO2−3 is in equilibrium with Ag2SO3(s) and 9.40×10−3 M Ag+ ? The Ksp of Ag2SO3 can be found in this table.

Ksp of Ag2SO3 = 1.50x10^-14

Answers

The concentration of SO32- in equilibrium with Ag2SO3(s) and 9.40×10−3 M Ag+ is 1.59×10^-11 M.

Ksp is defined as the equilibrium constant for the dissolution of a slightly soluble compound in an aqueous medium. The dissolution of a salt occurs in a dynamic equilibrium state.The solubility product, Ksp, is a thermodynamic quantity that describes the equilibrium concentration of ions in a saturated solution of an ionic compound.

Ag2SO3 has a solubility product of 1.50x10^-14.Ksp=[Ag+]^2[SO32-]From the question statement;[Ag+]= 9.40×10−3 MKsp= 1.50x10^-14Substitute the known values into the expression for Ksp:Ksp=[Ag+]^2[SO32-]1.50×10−14=9.40×10−3 M^2 × [SO32-]Solve for [SO32-]:[SO32-]=1.50×10−14/9.40×10−3 M^2[SO32-]=1.59×10^-11 MTherefore, the concentration of SO32- in equilibrium with Ag2SO3(s) and 9.40×10−3 M Ag+ is 1.59×10^-11 M.

To know more about concentration visit:

https://brainly.com/question/3045247

#SPJ11

Other Questions
Tax from Friends Partnership has three partners. The balance of each partner capital is: Ala $48,000; Mariam $50,000 and Fatima $52.000. Alla withdraws from the Partnership. The remaining partners, Mariam and Fatima, agreed to pay cash of $56,000 for Alla from partnership. The partners share income and loss equally Required How much is the capital balance for the remaining partners Mariam and Fatma after the withdrawal of Alla In order to implement the insert() function for a heap implemented using a vector A containing n values do the following: A: Place new element in A[n], then sift-down(A[n])B: Place new element in A[0], then sift-down(A[0])C: Place new element in A[n], then sift-up(A[n])D: Place new element in A[0], then sift-up(A[0])Group of answer choicesABCD In your own words, explain WHY is the assumption of ceteris paribus important? Find the point of inflection of the graph of the function. (If an answer does not exist, enter DNE.) f(x)=sin2x,[0,4](x,y)=( Describe the concavity of the graph of the function. (Enter your answers using interval notation. If an answer does not exist, enter DNE.) concave upward concave downward Find the point of inflection of the graph of the function. (If an answer does not exist, enter DNE.) f(x)=5sec(x2),(0,4)(x,y)=( Describe the concavity. (Enter your answers using interval notation. If an answer does not exist, enter DNE.) concave upward concave downward why dont women have the mechanical skills to take care of their own cars?"" Find the medianFind the median: 35, 94, 102, 58, 28, 88, 13 Median ..... 10. Circle the correct statement below about magnetic reversals documented during earth's history. A. There have been at least 10 reversals in the last 10 thousand years. B. There have been at least 1 You are the night supervisor at a local McDonalds. The table below gives the PDF corresponding to the number of workers who call in sick on a given night. x P(x) 0 0.7 1 0.15 2 0.1 3 0.05 What is the what would happen if the sun were instantly replaced with a black hole of the same size (1 solar mass)? Cu2+(aq) + 2e- Cu(s) E = 0.34 VCr3+(aq) + e- Cr2+(aq) E = -0.41 VAccording to the half-reactions represented above, which of the following occurs in aqueous solutions under standard conditions?a. Cu2+(aq) + Cr3+(aq) Cu(s) + Cr2+(aq)b. Cu2+(aq) + 2Cr2+(aq) Cu(s) + 2Cr3+(aq)c. Cu(s) + 2Cr3+(aq) Cu2+(aq) + 2Cr2+(aq)d. Cu(s) + Cr3+(aq) Cu2+(aq) + Cr2+(aq)e. 2Cu2+(aq) + Cr3+(aq) 2Cu(s) + Cr2+(aq) While making brunch you accidentally knock over your mimosa. You quickly grab a paper towel and wipe it up with one towel. This result is best described by:Group of answer choicesThe quicker picker upperReliability QualityPerformance QualityConformance Qualit Using ner present varue and internat rate of return to evaluate investment opportunities di Dwight Donovan, the president of Donovan Enterprises, is considering two investment opportunities. Because of limited resources, he will be able to invest in only one of them. Project A is to purchase a machine that will enable factory automation: the machine is expected to have a useful life of four years and no salvage value. Project B supports a training program that will improve the skills of employees operating the current equipment. Initial cash expenditures for Project A are $400,000 and for Project B are $160,000. The annual expected cash inflows are $126,000 for Project A and $52,800 for Project B. Both investments are expected to provide cash flow benefits for the next four years. Donovan Enterprises desired rate of return is 8 percent. Required :a. Compute the net present value of each project. Which project should be adopted based on the net present value approach? Round your computations to two decimal points, b. Compute the approximate internal rate of return of each project. Which one should be adopted based on the internal rate of return approach? Round your rates to six decimal points. c. Compare the net present value approach with the internal rate of return approach. Which method is better in the given circumstances? Why? A stock with a current market price of $30 has an associated put option priced at $4.5. This put option has an exercise price of $28. The put option has an intrinsic value of and a time value of Select one: a. $0; $2.5 b. -$2; $6.5 O c. $2; $2.5 O d. $2; $4.5 e. $0; $4.5 Which of the following does not provide a way for governments to finance a budget deficit? (Hint: financing implies providing credit.) oA sale of government bonds to households. oA sale of government bonds to the overseas sector. oCreating new money oAn increase in taxation. scenario 2: the contract between katie and rip u off, llc fact katie needs transportation to get to and from her babysitting jobs, so she went out and bought a used mini-van from rip u off, llc for $3,000. katie and rip u off, llc agreed to an $1,000 down payment on june 15th and the other $2,000 be paid by monthly payments of $400 for the next 5 month onThis problem has been solved!You'll get a detailed solution from a subject matter expert that helps you learn core concepts.See AnswerQuestion:Scenario 2: The Contract Between Katie And Rip U Off, LLC Fact Katie Needs Transportation To Get To And From Her Babysitting Jobs, So She Went Out And Bought A Used Mini-Van From Rip U Off, LLC For $3,000. Katie And Rip U Off, LLC Agreed To An $1,000 Down Payment On June 15th And The Other $2,000 Be Paid By Monthly Payments Of $400 For The Next 5 Month OnScenario 2: the contract between Katie and Rip U Off, LLCFactKatie needs transportation to get to and from her babysitting jobs, so she went out and bought a used mini-van from Rip U Off, LLC for $3,000. Katie and Rip U Off, LLC agreed to an $1,000 down payment on June 15thand the other $2,000 be paid by monthly payments of $400 for the next 5 month on the 15th. Once The Evans family lost their jobs and told Katie and Jenna they no longer need their service anymore. Katie then began to flip out and decided she was no longer using the mini-van anymore and she would not be paying Rip U Off, LLC any more moneyIssueShould Katie counties paying off her mini-van by paying the monthly payment as she still owes $2,000 to Rip U Off, LLC?RuleClick to enter textApplicationClick to enter textConclusionClick to enter text What is the value of a preferred stock when the dividend rate is 16 percent on a $100 par value? The appropriate discount rate for a stock of this risk level is 12 percent? a calculate the standard entropy change for the reaction at 25 c. standard molar entropy values can be found in this table. c3h8(g) 5o2(g)3co2(g) 4h2o(g) rxn= 165.7 j/k A new product has the following sales and cost data: Selling Price Variable Costs Fixed Costs Forecast SalesRequired: Using the above data: $60 Per Unit $40 Per Unit $25,000 Per Month 1,800 Unit Per Month Part 1: Prepare a Complete Beak Even Chart accurately showing each of the following: FC Line, TC Line, Sales Revenue Line, BEP, Profit Area, Loss Area, and Profit at forecasted level of sales in addition to Margin Safety Area. Calculate each of the following: (A): BE (Units) (B): BE ($). (C): MS (Units) (D): MS ($) (E): MS (%) (F): Forecasted Profit In recording cash paid by the company to the withdrawing partner, the journal entry to include fisher capital account in cred and cash acourt is b O True O False 1 points Seen dealt with asset retirement obligations. Provide a summary of this statement. Additionally, list the implementation issues addressed by the EITF for asset retirement obligations.