a beam of electrons,neutrons and protons can be separated by passing them through an electric field.
Which direction does each particle follow?

1.6987 grams the silver nitrate crystals is weighed, 100 mL of water is measured, and the weighed silver nitrate is dissolved in the measured amount of water.

We are to prepare a 0.1 M silver nitrate solution given the following:

First, we need to make some calculations to make the amount of silver nitrate and water that will be used.

0.1 M means 0.1 mol silver nitrate crystal in 1 L of water. However, we only have a 100 mL volumetric flask. We need to know the mol amount that will be equivalent to 100 mL of water.

0.1 mol = 1000 mL

100 mL = 100 x 0.1/1000

            = 0.01 mol

Mole = mass/molar mass

Molar mass of silver nitrate = 169.87 g/mol

0.01 mol silver nitrate = 0.01 x 169.87

                                    = 1.6987 grams

Thus, 1.6987 grams of silver nitrate would be weighed.

The following steps would be taken to prepare the solution:

What you will have is 100 mL of 0.1 M silver nitrate solution.

More on solution preparation can be found here: https://brainly.com/question/14667249

#SPJ1

Decantation is widely used to purify a liquid by separating it from an insoluble particle suspension (e.g. in red wine, where the wine is decanted from the potassium bitartrate crystals to avoid unsavory taste).

Decantation is a process of separating solid-liquid mixtures or two or more immiscible liquids. Allowing the mixture to settle into various layers, the lightest/heaviest liquid layers are drained out.

This approach is used in the following ways:

1. Mud-water mixture separation (solid-liquid mixture)

2. Oil and water separation (immiscible liquid mixture)

3. Kerosene and water separation

Decantation is the process of separating liquid from solid and other immiscible (non-mixing) liquids by eliminating the liquid layer on top from the solid or liquid layer underneath.

To learn more about potassium bitartrate crystals visit:https://brainly.com/question/8717978

#SPJ9

We obtain the mass percent of the element T as 96.5%.

We know that the mass percent actually has to do with the mass of the object that we could have in a compound expressed as a percentage. Note that we are told that most of the new elements that were discovered do exist as oxides this implies that they are binary compounds of the element that is involved and oxygen.

Now we have to look at the section of the table that have been given in the question so as to be able to obtain the the mass percent of the element as we have it. We can see as it has been written in the table that the atomic mass of the element T is found to be 362.31.

We would now have;

Molar mass of the compound = 6(362.31) + 5(16)

= 2173.86 + 80

= 2253.86

Mass percent composition of element T =  6(362.31)/2253.86 * 100/1

= 96.5%

Learn more about mass percent:https://brainly.com/question/5394922

#SPJ1

Answer:

Cu(NO3)2 (aq) + K2CO3 (aq) => CuCO3 (s) + 2KNO3 (aq)

Explanation:

I interpret your question is how to balance the above reaction, right?

Cu(NO3)2 (aq) + K2CO3 (aq) => CuCO3 (s) + 2KNO3 (aq)

Cu: 2

NO3: 2

K: 2

CO3: 2

The statement " Inertia and distance combine to keep Earth in orbit around the Sun and the Moon in orbit around Earth " is false.

According to Sir Isaac Newton, he proposed and concluded in his investigation that the earth is being kept in its orbit around the Sun and the Moon in orbit around Earth by means of gravity and inertia. This is not done through inertia and distance.

In conclusion, it can be deduced from the explanation given above that inertia and gravity combine to keep the earth in orbit around the Sun and the Moon in orbit around Earth.

Read more on inertia:

https://brainly.com/question/1140505

#SPJ1

Answer:

These forces differ from covalent and ionic chemical bonding because they result from fluctuations in charge density of particles. Examples of van der Waals forces include hydrogen bonding, dispersion forces, and dipole-dipole interactions.

Explanation:

A) The work you do on the pumpkin is 31.36 J as you lift it from the ground.

B) The work is zero as you carry it from the field.

Work can be defined as the energy spent when applying a force to move an object through a certain displacement.

The work by a force to move an object through a displacement (d) can be written as:

W = Fdcosθ

Where θ is angle between force and displacement.

(a) The mass, the displacement of the pumpkin from the ground, and the angle are:

m = 3.2 kg

d = 1.4 m

θ = 0∘

Here, the force exerted during lifting the pumpkin is equal to the weight of the pumpkin:

F = mg = (3.2)(9.8) = 31.36 N

Thus, the work done when lifting the pumpkin is

W = F d cosθ = (31.36 N)(1.4m)cos(0∘) = 44 J

(b) When carrying the pumpkin, the force exerted will be upward while the displacement of the pumpkin will always be directed forward. Therefore, they are perpendicular (i.e. θ = 90∘) to each other which is the reason why the work is zero.

Learn more about work, here:

https://brainly.com/question/13662169

#SPJ1

The way that scientists predict how much of a product can be formed is through the use of Stoichiometry.

The quantitative examination of the constituents of a chemical process is known as chemical stoichiometry. The Greek words "stoikhein" (which means element) and "metron" (which means measure) are the roots of the English word "stoichiometry."

Stoichiometry describes the correlation between the amounts of reactants and products before to, during, and after chemical processes.

Therefore, the quantity of the generated good is predicted by stoichiometry. To calculate how many S'more "reactants," for instance, we employed stoichiometry.

Learn more about Stoichiometry from

https://brainly.com/question/14935523
#SPJ1

The IUPAC name and molecular formula for the following are,

a) prop-1-yne, C3H4

b) non-4-yne, C9H16

c) hex-3-yne, C6H10

What is IUPAC name?

International Unit for Pure and Applied Chemistry (IUPAC) is the method of naming the organic compounds in chemistry. It creates a standardized naming for the chemical compounds. There are prefixes, suffixes and parent chain considered while naming a compound.

The IUPAC name can be written by counting the parent chain carbons and considering the functional group present which is a triple bond in the given compounds. The molecular formula can be written by counting the number of different atoms present in the compound.

Therefore, the IUPAC name and molecular formula of the given compounds can be written as,

a) prop-1-yne, C3H4

b) non-4-yne, C9H16

c) hex-3-yne, C6H10

To learn more about IUPAC names click on the given link https://brainly.com/question/28872356

#SPJ1

The empirical formulas of the two oxides are CO and [tex]CO_2[/tex] respectively. Thus, the figures illustrate the law of multiple proportions.

The law of multiple proportions states that when two elements form more than one compound, the ratios of the masses of the second element which combine with a fixed mass of the first element will always be ratios of small whole numbers.

Now, let's see if the figures quoted in the problem obey this law:

The first oxide:

C = 42.9

O = 100-42.9

   = 57.1

The equivalent mole of each atom would be:

C = 42.9/12

  = 3.56

O = 57.1/16

   = 3.56

Thus, the empirical formula of the first oxide is CO.

The second oxide:

C = 27.3

O = 100 - 27.3

   = 72.7

The equivalent mole of each atom will be:

C = 27.3/12

  = 2.27

O = 72.7/16

   = 4.54

Dividing the moles by the smallest mole

C = 2.27/2.27

  = 1

O = 4.54/2.27

   = 2

Thus, the empirical formula of the second oxide is [tex]CO_2[/tex].

In other words, the figures quoted obeys the law of multiple proportions.

More on the law of multiple proportions can be found here: https://brainly.com/question/28458716

#SPJ1

Comparing the results for each pair of tests, we conclude that Displacement reaction is taking place.

In the displacement reaction , one atom is displaced by the the another atom according to their reactive strength . the highly reactive atom displace the low reactive atom called as displacement reaction.

The reactions are given as :

FeSO₄  +  Zn  ---->  ZnSO₄   +   Fe

Fe(NO₃)₂   +  Zn ----->   Zn(NO₃)₂   +  Fe

Here the zinc is more reactive than the iron . so, Zinc displace the iron in both the cases. Zinc displace the iron in both the cases. The reaction is called as displacement reaction.

Thus, Comparing the results for each pair of tests, we conclude that Displacement reaction is taking place.

To learn more about Displacement reaction here

https://brainly.com/question/3172917

#SPJ1

When chromium changes from an oxidation state of +3 to that of +6, the Cr3+ must: lose 3 electrons.

So option C is correct.

The oxidation state or oxidation number, is the hypothetical charge of an atom if all of its bonds to different atoms were fully ionic which describes the degree of oxidation of an atom in a chemical compound. In any concept, the oxidation state may be positive, negative or zero.

When chromium changes from an oxidation state of +3 to + 6 it loses 3 electrons during the process. For example oxidation state of elemental atoms such as sodium, magnesium, iron is zero.

Learn more about oxidation state at: https://brainly.com/question/25551544

#SPJ1

A close-up photograph must be taken by the prosecutor to demonstrate the position of the body in relation to the rest of the crime scene.

For criminal investigation analysis, it becomes important to capture photographs from those areas in which acts of violence took place. To record the crime scene in more detail the photograph must be taken from close range and also with perfection. Close range photographs enables the viewer to understand where and how the crime was committed. The photographs of entry and exit of the crime scene is taken so carefully to observe the movement of the criminal before and after of the crime.

Learn more about photographs of murder scene from the link given below.

https://brainly.com/question/13694803

#SPJ1

Answer:  C

Explanation:

16 grams of HCl are in 1 L of 6 M HCl

Number of moles of a substance is actually the ratio of the given mass in the chemical reaction to the mass of one mole of substance. One mole of any substance equals Avogadro's number. It is also used to express concentration units such as mole per liter or molecular weight

Formula for molarity of solute is given as:

Molarity =   moles of solute                

                  Volume of solution in liter

moles of solute = Volume of solution × Molarity

moles of solute = 1L × 6M ⇒ 6moles

Mass of HCl = Number of moles × Molecular weights

                     = 6 × 36.5 ⇒ 16 grams

Therefore the 16 grams of HCl are in 1 L of 6 M HCl

To know more about Gram or mass

https://brainly.com/question/3527852

#SPJ1

The molarity of the stock Mn²⁺ ions is 0.0288 M

Based on the dilution formula;

The molarity of a solution is the number of moles of a solute dissolved in a given volume of solution in liters.

The molarity of the stock solution is:

moles of Mn²⁺ ions = mass / molar mass

molar mass of  Mn²⁺ ions = 55.0 g/mol

moles of Mn²⁺ ions = 1.584 / 55

moles of Mn²⁺ ions = 0.0288 moles

molarity of Mn²⁺ ions = 0.0288 / 1

molarity of Mn²⁺ ions = 0.0288 M

The dilution formula is used to determine the molarities of A, B, and C.

C₁V₁ = C₂V₂

C₂ = C₁V₁ / V₂

Where;

Molarity of A = 50 * 0.0288 / 1000

Molarity of A = 0.00144 M

Molarity of B = 10 * 0.00144 / 250

Molarity of B = 0.0000576 M

Molarity of C = 10 * 0.0000576 / 500

Molarity of C = 0.000001152 M

Learn more about molarity at: https://brainly.com/question/17138838

#SPJ1

The compound with the chemical formula PbBr₄ is called lead(IV) bromide.

Lead(IV) bromide is an inorganic compound composed of the elements lead (Pb) and bromine (Br). The compound is named based on the oxidation state of lead, which is +4 in this case.

In naming compounds, the Roman numeral in parentheses after the element name indicates the oxidation state of the metal. In the case of lead(IV) bromide, the Roman numeral IV indicates that lead is in the +4 oxidation state. This means that lead has lost four electrons to achieve a stable configuration.

The name "lead(IV) bromide" accurately represents the composition and oxidation state of the compound. It is worth noting that lead(IV) bromide is a relatively unstable compound and is not commonly encountered in practical applications.

Hence, the name of the compound is lead(IV) bromide.

Learn more about compound here:

https://brainly.com/question/14117795

#SPJ 4

Explanation:

Neon is a non-metal. it belongs to group 8 or 18 of the periodic table of elements and is also referred to as a noble gas.

In this compound, there would be five proton NMR signals,

We know that the acronym NMR means nuclear magnetic resonance. It has to do with the kind of spectrum in which the kind of chemical environment where the proton is found would impact the spectrum that is observed in the compound.

The first thing that we need to look at and find out in the image is to be able to find out the number of chemical environments that we have in the compound as we can see it in the image.

By studying the compound closely, we can see that there are four different proton chemical environments that we can be able to see and map out from the compound and it is these chemical environments that tell us the number of signals to expect.

Learn more about NMR:https://brainly.com/question/9442853

#SPJ1

The set of reactions that best represents the diagram of a precipitation reaction is given below:

Li₂SO₄ (aq) + AgNO₃ (aq)  ---->

The net ionic equation is given below:

SO₄²⁺ (aq) + 2 Ag⁺ (aq)  ----> Ag₂SO₄ (s) (a precipitate)

Precipitation reactions are reactions in which two soluble solutions when they are mixed result in the formation of an insoluble precipitate.

Precipitation reactions rea usually double replacement reactions.

Double replacement reactions also known as double displacement reactions are reactions in which an exchange of radicals occurs between two metallic cations resulting in the formation of an insoluble compound that forms the precipitate observed.

Considering the given reactions and the products obtained:

NH₄Br (aq) + Pb(C₂H₃O₂)₂ (aq) ---> forms no precipitate

KNO₃  (aq) + CuCl₂(aq) ---->  forms no precipitate

Li₂SO₄ (aq) + 2 AgNO₃ (aq)  ---->  2 LiNO₃ (aq) + Ag₂SO₄ (s) (forms a precipitate)

NaClO₄ (aq) + CaCl₂ (aq)  ---->  forms no precipitate

Learn more about double replacement reactions at: https://brainly.com/question/23918356

#SPJ1

Spontaneous reaction is a reaction that occurs without the addition of energy

There are two types of reactions in thermodynamics:

Endothermic reactions -

Exothermic reactions -

Thus we can conclude that spontaneous reaction is a reaction that occurs without the addition of energy

Learn more about exothermic reactions at https://brainly.com/question/24808802

#SPJ13

The volume of the solution is obtained as 414 mL.

Often times, we want to  reduce the concentration of a solution and the way that we can be able to do that is by the process of dilution. When we say dilution what it means is that we are going to increase the volume of the solution.

In this case;

C1 = initial concentration

V1 = initial volume'

C2 = final concentration

V2 = final volume

Then;

C1V1 = C2V2

V1 = C2V2/C1

=  7.77 M * 842 mL/ 15.8 M

= 414 mL

Learn more about concentration:https://brainly.com/question/13872928

#SPJ1

NADP, nicotinamide adenine dinucleotide phosphate forms NADPH by combining with the H+ ion and two electrons. Thus, option C is correct.

NADP, nicotinamide adenine dinucleotide phosphate is a reducing agent in electron transport chains of metabolic processes in living things. NADPH is the reduced form of NADP.

In biochemical reactions such as glycolysis, photosynthesis etc, NADP plays a significant role as a reducing agent. NADP and NADPH together are called the redox couple and they maintain cellular redox homeostasis.

Hydrogenation of molecules is called reduction and thus the NADP+ reduces to its NADPH by combining with a two electrons and H+. Hence option C is correct.

To find more on NADP, refer here:

https://brainly.com/question/20308267

#SPJ1

Answer:

0.0833 M NaOH

Explanation:

To calculate the molarity, you need to

(1) convert grams NaOH to moles (using the molar mass)

(2) convert mL to liters

(3) calculate the molarity

It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs like the given value with the smallest amount of sig figs (0.499 = 3 sig figs).

 0.499 g NaOH              1 mole
--------------------------  x  ------------------  =  0.0125 moles NaOH
                                       40.00 g

 150.00 mL H₂O                  1 L
---------------------------  x  ------------------  =  0.15000 L H₂O
                                        1,000 mL

Molarity = moles / volume

Molarity = 0.0125 moles NaOH / 0.15000 L H₂O

Molarity = 0.0833 M

The molality of 6.2g of LiBr in 52.6g water is 0.0013mol/kg

The molecular weight of LiBr is 86.845 g/mol thus substituting this value in the formula of moles,

Moles of LiBr = grams/molecular weight

Moles of LiBr = 6.20/ 86.845

Moles of LiBr = 0.071 mol

Substituting the value of moles in the formula of molality

Molality= moles/grams of solvent

Molality= 0.071/52.6

Molality= 0.0013 mol/g

Molality, or more specifically, the number of moles of solute contained in a kilogram of solvent, is a unit used to express the concentration of a solution.

The quantity of moles of solute per kilogram of solvent is known as molality, which is denoted by a tiny "m."

For more information on molality kindly visit to

https://brainly.com/question/15315498

Answer:

Octane can be written as C8H18.

The balanced equation for combustion of octane is:

2C8H18 + 25 O2 ==> 16CO2 + 18H2O

Finding the limiting reactant:

10.g C8H18 x 1 mol C8H18 / 118 g = 0.0847 moles (÷2->0.042)

61.2 g O2 x 1 mol O2 / 32 g = 1.91 moles (÷25->0.077)

C8H18 is the limiting reactant and will dictate the maximum amount of H2O that can form.

Maximum H2O formed:

0.0847 moles C8H18 x 18 moles H2O / 2 moles C8H18 x 18 g H2O/mol = 14 g H2O formed (2 sig.figs.)

Explanation:

hope it can help you !

The mass percentage of HCl 11,900x/118 g and molality of solution is   9.915 mol L^-1.

Molarity = 11.8 M

Molarity = (moles of HCl) / (litres of solution)

Molality = (moles of HCl) / (kilograms of solvent)

=> Let number of moles of HCl present be x moles.

So, 11.8 = x/litres of solution

litres of solution = x/11.8 litres.

So, volume in mL = x/11.8 * 1000 mL =>10,000x/118 mL

Density of solution = 1.19 g/ml

So, D = m/v

Mass of solution = D * v => 1.19 * 10,000x/118 => 11,900x/118 g

=> (11,900x/118)/1000 L => 11.9x/118 litres

Moles of HCl = x moles.

Molality = x/( 11.9x/118)

=> 118x/11.9x => 118/11.9 => 9.9156 mol L-1

=> Molality of solution = 9.915 mol L-1 (approx.)

To learn more about molality visit:https://brainly.com/question/26921570

#SPJ9

Mole measure the number of elementary entities of a given substance that are present in a given sample. One mole of iron (ii) sulphate were reacted during the experiment.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

The balanced equation is

FeSO[tex]_4[/tex](aq) + 2 NaOH (aq) [tex]\rightarrow[/tex] Fe (OH)[tex]_2[/tex] + Na [tex]_2[/tex] SO [tex]_4[/tex]

Stoichiometry, thet is written in the front of molecule or compound represents the number of moles of that compound. One mole of iron (ii) sulphate were reacted during the experiment.

Therefore, One mole of iron (ii) sulphate were reacted during the experiment.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

The mass of the magnesium oxide will produce is equal to 9.32 grams

A limiting reagent can be described as the reactant in the chemical reaction which is consumed first during the completion of a chemical reaction.

The limiting reagent decides the yield of the product when the amount of the reactants is not taken in stoichiometry.

Given, chemical reaction of magnesium and iron oxide is:

[tex]3 Mg + 1 Fe_2O_3 \longrightarrow2 Fe + 3 MgO[/tex]

The mass of the magnesium = 5.6 g

The number of moles of Mg = 5.6/24 = 0.233

The mass of the iron oxide = 10 g

The number of moles of  Mg = 10/103.8 = 0.096

The 3 moles of Mg react with iron oxide = 1

Then 0.233 moles of Mg react with iron oxide = 0.233/3 = 0.077

Therefore magnesium is a limiting reagent.

The 0.233 moles of Mg will produce magnesium oxide 0.233 moles.

The mass of the magnesium oxide = 0.233 × 40 = 9.32 g

Learn more about limiting reagent, here:

https://brainly.com/question/11848702

#SPJ1

When metals and non metals combine in fixed proportion then a chemical compound is formed So, the compound that will be formed from group 13 elements and group 17 is AlCl₃.

Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.

Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral, the charge over cation and anion is also called oxidation state. the compound that will be formed from group 13 elements and group 17 is AlCl₃.

Therefore, the correct option is option A.

To learn more about Chemical formula, here:

https://brainly.com/question/28522480

#SPJ1