a car starts from rest and accelerates at 0.300 m/s2 . what is the speed of the car after it has travelled 25.0 m?

The acceleration due to gravity of the planet will be 83.75 m/s².

The gravity of Earth is denoted by g. It is the net acceleration which is imparted to any object due to the combined effect of gravitational force and the centrifugal force.

g = GM/ R²

where, g is the acceleration due to gravity,

G is the gravitational constant = 6.7 × 10⁻¹¹ Nm²/ kg²

M is the mass of the planet, which is equal to 9.8 × 10²⁶ kg

R is the radius of the planet which is equal to 2.8 × 10⁷ m

g = GM/ R²

g = (6.7 × 10⁻¹¹× 9.8 × 10²⁶)/ (2.8 × 10⁷)²

g =  65.66 × 10¹⁵/ ​7.84 × 10¹⁴

g = 8.375× 10¹

g = 83.75 m/s²

Therefore, the acceleration due to gravity is 83.75 m/s².

Learn more about Gravitational force here:

https://brainly.com/question/12528243

#SPJ1

Answer:

51 km/hr

Explanation:

car:  KE = 1/2mv² = 1/2(1000 kg)(15 km/hr)² = 112500

truck:  KE = 23(112500) = 2587500

KE = 1/2mv²  →   v² = 2(KE)/m  →   v = √2(KE)/m

v = √2(2587500)/(2000 kg) = 50.9 ≈ 51 km/hr

The centripetal force required for a planet to revolve in a circular motion around the sun is provided by the sun's gravitational pull on the planet. The round motion of the planet is caused by the centripetal force, which is always pointed in the direction of the sun's center at every point of its course.

The force of gravity accelerates items as they descend to the ground. Velocity is a measure of the speed and direction of motion, and acceleration is a change in velocity. The longer an object is in free fall, the faster it descends towards the ground due to gravity.

A planet needs to accelerate towards the circle's centre in order to travel in a curved route. Centripetal acceleration, which is provided by the gravitational attraction of the sun and the planet, is what causes this.

Therefore, yes, change in direction is acceleration.

Learn more about planet here:

https://brainly.com/question/15268075

#SPJ4

The angular acceleration can be calculated using the formula α = (ωf - ωi) / t, where ωf is the final angular velocity, ωi is the initial angular velocity, and t is the time taken. Substituting the given values, the net torque on the object is found to be 8.0 N.m.

The moment of inertia of an object is a measure of its resistance to rotational motion and depends on its mass and distribution of mass. The angular velocity of an object is the rate at which it rotates around its axis and is measured in radians per second.

In this question, the moment of inertia of the object is given as 2.0 kg.m^2, and its angular velocity increases from 20 rad/s to 60 rad/s in 10 seconds. We need to find the net torque acting on the object during this time.

The net torque on the object can be calculated using the formula τ = Iα, where τ is the net torque, I is the moment of inertia, and α is the angular acceleration. The angular acceleration can be calculated using the formula α = (ωf - ωi) / t, where ωf is the final angular velocity, ωi is the initial angular velocity, and t is the time taken.

Substituting the given values,

we get α = (60 rad/s - 20 rad/s) / 10 s = 4.0 rad/s^2. Therefore, τ = Iα = 2.0 kg.m^2 x 4.0 rad/s^2 = 8.0 N.m. Hence, the net torque acting on the object is 8.0 N.m.

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ4

The charged density of the parallel plates affects the electric field between them. The field between plates is 0 if they are neutral or 0 if they carry charges, depending on which way they are charged. While there is no field inside the sphere.

The capacitor's two oppositely charged plates are separated by an electric field that is constant throughout, except the plate edges.

The electric field does not change since the space between the plates is smaller than their combined surface area.

Because the two parallel charged plates are kept apart from one another, a homogenous electric field is created there.

Therefore, Potentially, there will be a double differential between the plates.

Learn more about electric field here:

https://brainly.com/question/8971780

#SPJ1

The charge on capacitor C2 is 3.367 microcoulombs.

To determine the charge on capacitor C2, we can use the formula for capacitance:

C = Q / V

where C is the capacitance, Q is the charge, and V is the potential difference. We can rearrange this formula to solve for the charge:

Q = C * V

We first need to calculate the equivalent capacitance of the circuit, which can be found by adding the capacitances of C1 and C3 in series, and then adding that result to C2 in parallel. The equivalent capacitance is:

1/Ceq = 1/C1 + 1/C3

1/Ceq = 1/2 µF + 1/1 µF

1/Ceq = 1.5 µF

Ceq = 2/3 µF

Now we can find the charge on C2 by using the formula:

Q = C2 * V

Substituting the known values, we get:

Q = (2/3 µF) * 5.05 V = 3.367 µC

Therefore, the charge on capacitor C2 is 3.367 microcoulombs.

Learn more about capacitor here :

brainly.com/question/14844377

#SPJ4

Marcus' experiment is flawed because he is not controlling for the effects of air resistance.

To know more about gravity visit:

https://brainly.com/question/30352914

#SPJ1

The time constant () in an RC discharging circuit is still equal to 63%. The voltage across the capacitor in an RC discharging circuit that is initially fully charged will then have decreased by 63% of its initial value after one time constant 1T which is equal to 1 - 0.63 = 0.37 or 37% of its final value.

What is time constant () in an RC discharging circuit?

The time it takes for the capacitor to discharge to a value that is within 63% of its fully charged value is used to calculate the circuit's time constant. Therefore, the voltage across the plates that represents 37% of the RC discharge circuit's one time constant, with its final value being zero volts.

To know more about time constant() ,visit:

https://brainly.in/question/3077766

#SPJ1

Answer:

300 Watt

Explanation:

power=(450/3)*2

Miss case of 16 calculators, which she got for half price. Shipping was $12. Which brought the total to $100. The full price for a case is $176.

A calculation is a deliberate mathematical process that transforms one or more inputs into one or more outputs or results.

Here the price of the calculator has to be calculated

The total price including the shipping is $100

She got 16 calculators

Shipping was $12

100 - 12 = 88

Since there was half price.

88 x 2  = $176

Therefore, the full price for a case is $176.

To learn more about calculations, refer to the link:

https://brainly.com/question/6767262

#SPJ9

The value of the displacement of the car is approximately 270 km, which is not equal to 192 km.

To calculate the displacement of the car, we need to find the total distance traveled by the car and subtract the initial position. In this case, the initial position is point A, so the displacement is the distance from point A to point C.

The distance traveled between A and B can be calculated using the average speed and the time taken to travel this distance:

d = v * t

t = d / v

where:

Substituting the values, we get:

d = 120 km

v = 60 km/h = 60 / 3.6 m/s = 16.67 m/s

t = d / v

t = 120 / 16.67

t = 7.2 hours

The distance traveled between B and C can be calculated in the same way:

d = 150 km

v = 50 km/h = 50 / 3.6 m/s = 13.89 m/s

t = d / v

t = 150 / 13.89

t = 10.79 hours

The total distance traveled by the car is:

d = d1 + d2

d = 120 + 150

d = 270 km

The displacement is equal to the distance from point A to point C, which is equal to the total distance traveled by the car:

|∆x| = d

|∆x| = 270 km

Learn more about displacement here: https://brainly.com/question/2109763

#SPJ1

Hundreds of millions of kilometres away, the Mars Reconnaissance Orbiter camera photographed a unique formation that, to the delight of scientists and space observers, appeared to be shaped like a bear's face.

The Viking 1 lander captured it on July 20, 1976, shortly after it landed on the planet. This new image from the Mars Reconnaissance Orbiter's HiRISE camera purports to show the face of a bear forming on the Martian surface.

The intriguing geological formation was photographed in December by the High Resolution Imaging Experiment (HiRISE) instrument on board the Mars Reconnaissance Orbiter.

To know more about Orbiter visit:-

https://brainly.com/question/19516096

#SPJ1

When the system is at rest, there are 2 forces acting on the 9 kg block.

An object experiences a push or pull as a result of interaction with another object. A force is exerted on each object when two of them come into contact. The newton, represented by the letter N, is the SI unit of force.

There are two different types of forces: contact forces and non-forces. A few examples of forces are nuclear force, gravitational force, frictional force, magnetic force, electrostatic force, spring force, and others.

To know more about forces visit:-

https://brainly.com/question/13191643

#SPJ1

The change in potential energy of the system depends on the charges and distances of the source particles, as well as the charge of the alpha particle and the distances between the alpha particle and the source particles.

To calculate the change in potential energy of the system, we need to know the electric potential at points A and C, and the charge of the particles involved.

If we assume that the alpha particle is moving in a vacuum and that the source charges are fixed, then we can use the formula for the potential energy of a point charge in an electric field:

U = qV

where U is the potential energy, q is the charge of the particle, and V is the electric potential at the point where the particle is located.

Since an alpha particle consists of two protons and two neutrons, its net charge is +2e, where e is the elementary charge. We also need to know the charges of the source particles.

Let's assume that the source charges are two positive point charges, located at points A and B, respectively. We can also assume that the alpha particle starts at point A and moves to point C, which is at a distance r from point A and a distance s from point B.

The electric potential at point A, VA, is given by:

VA = k(q1/r1 + q2/r2)

where k is the Coulomb constant, q1 and q2 are the charges of the source particles at point A and B, respectively, and r1 and r2 are the distances between the source particles and point A.

Similarly, the electric potential at point C, VC, is given by:

VC = k(q1/(r+s) + q2/s)

The change in potential energy of the alpha particle as it moves from point A to point C is:

ΔU = Uc - Ua = qVC - qVA

Substituting the values of VA and VC, we get:

ΔU = qk(q1/(r+s) + q2/s) - qk(q1/r1 + q2/r2)

Simplifying this expression, we get:

ΔU = qk(q1/r1 - q1/(r+s) + q2/s - q2/r2)

So, the change in potential energy of the system depends on the charges and distances of the source particles, as well as the charge of the alpha particle and the distances between the alpha particle and the source particles.

Learn more about alpha particle here:

https://brainly.com/question/24276675

#SPJ4

To determine the physical quantities and units represented by a, b, and d, we need additional information about the specific context in which the equation is being used.

The equation you provided, v = √ab + bt + d + t, is a mathematical expression that relates the velocity, v, of a particle to time, t.

However, without additional information, it is not possible to determine the physical quantities represented by the variables a, b, and d, or their corresponding units.

Typically, in physics, the variables in a equation represent specific physical quantities, and the units associated with these variables help us understand the nature of the physical system being described.

Learn more about  physical quantities here: https://brainly.com/question/5873459

#SPJ1

Answer: An element with 5 electrons is more likely to either gain 3  electrons in its’ outer-most valence electron shell

Explanation: To determine whether an element with 5 electrons is more likely to gain 3 or lose 5 electrons in its outermost valence electron shell, we can use the Lewis Dot Structure.

1. Draw the symbol of the element. For example, let's consider the element with 5 electrons as X.

2. Determine the number of valence electrons for the element. Since the element has 5 electrons, it will have 5 valence electrons.

3. Represent the valence electrons as dots around the symbol of the element. In this case, we would draw 5 dots around the symbol X.

4. Analyze the electron configuration to determine the stability of the element.

- If the element gains 3 electrons, it will have a total of 8 valence electrons. This would result in a stable electron configuration, similar to the nearest noble gas. For example, if the element is in Group 15, gaining 3 electrons would give it the electron configuration of the noble gas, Neon (2, 8).

C.S. Lewis believed that science and magic are distinct and incompatible ways of knowing and interacting with the world

C.S. Lewis believed that science and magic are distinct and incompatible ways of knowing and interacting with the world. Science is concerned with understanding the natural world through observation and experimentation, while magic is a form of supernatural power that operates outside the laws of nature.

Lewis also believed that science and magic have different ethical implications. Science is morally neutral, while the use of magic often has negative consequences and can lead to a desire for power and control.

In his fiction, such as the Chronicles of Narnia series, Lewis often used the contrast between science and magic to explore larger philosophical and spiritual themes.

Learn more about Science and magic:https://brainly.com/question/15627083

#SPJ1

(a)  The velocity of the neutron after the collision [tex]3.00(10^3)[/tex] km/s.

(b) Different materials may have different properties that make them more or less suitable as coolants in a fast breeder reactor.

(a) In an elastic collision, momentum and kinetic energy are conserved. Let m be the mass of the neutron and M be the mass of the sodium atom. Before the collision, the momentum of the neutron is

p = mv,

where v is the velocity of the neutron.

The momentum of the sodium atom is zero because it is motionless. Therefore, the total momentum before the collision is

[tex]p_{total} = mv[/tex].

After the collision, the neutron recoils backward along exactly the same path it traveled, so its final momentum is

[tex]p_f = -mv[/tex].

By conservation of momentum, the total momentum after the collision is also

[tex]p_{total} = p_f + 0 = -mv[/tex].

Equating the total momentum before and after the collision gives:

[tex]p_{total} = mv = -mv[/tex]

Solving for the final velocity [tex]v_f[/tex] of the neutron, we get:

[tex]v_f = -v = -3.00(10^3)[/tex] km/s

Therefore, the velocity of the neutron after the collision is [tex]3.00(10^3)[/tex] km/s in the opposite direction.

(b) We follow the same procedure as in part (a), but with a lithium atom instead of a sodium atom.

Let M be the mass of the lithium atom.

Before the collision, the momentum of the neutron is

p = mv,

where v is the velocity of the neutron.

The momentum of the lithium atom is zero because it is motionless. Therefore, the total momentum before the collision is

[tex]p_{total} = mv[/tex]

After the collision, the neutron recoils backward along exactly the same path it traveled, so its final momentum is

[tex]p_f = -mv[/tex].

By conservation of momentum, the total momentum after the collision is also [tex]p_{total} = p_f + 0 = -mv[/tex].

Equating the total momentum before and after the collision gives:

[tex]p_{total} = mv = -mv[/tex]

Solving for the final velocity [tex]v_f[/tex] of the neutron, we get:

[tex]v_f = -v = -3.00(10^3)[/tex] km/s

Therefore, the velocity of the neutron after the collision is [tex]3.00(10^3)[/tex] km/s in the opposite direction.

Comparing the results of parts (a) and (b), we see that the type of metal does not affect the velocity of the neutron after an elastic collision. However, different materials may have different properties that make them more or less suitable as coolants in a fast breeder reactor.

For similar questions on velocity of the neutron,

https://brainly.com/question/6858974

#SPJ4

False. An object traveling in the negative direction and accelerating in the negative direction will not slow down, but will actually speed up.

Acceleration is the rate of change of velocity, and if an object is accelerating in the negative direction, it means that its velocity is decreasing in the positive direction and increasing in the negative direction. Therefore, the object will continue to move in the negative direction at a faster speed.

It is important to consider that acceleration is a magnitude that can cause the velocity of a body to increase or decrease.

See more about acceleration at https://brainly.com/question/460763.

#SPJ11

That being said, it's important to measure both the length and diameter of a cylinder as accurately as possible to ensure precise and reliable results. The measuring tools and techniques used should be appropriate for the size and shape of the cylinder, and any uncertainties or errors in the measurements should be accounted for and minimized as much as possible.

What is Cylinder?

A cylinder is a three-dimensional geometric shape that consists of two parallel, congruent circular bases and a curved lateral surface that connects the bases. A cylinder can be thought of as a tube or pipe with a uniform circular cross-section, and is one of the most basic and fundamental shapes in geometry.

In general, the length of a cylinder should be measured more carefully than the diameter. This is because the length of a cylinder typically determines its overall volume and surface area, and any errors in measuring the length can have a larger impact on these properties than errors in measuring the diameter.

For example, if the length of a cylinder is measured too long or too short by even a small amount, it can result in a significant difference in the volume and surface area of the cylinder, which can affect its performance in various applications. On the other hand, errors in measuring the diameter may have a lesser impact on the overall properties of the cylinder, especially if the cylinder has a relatively small diameter or if the diameter is not a critical factor in its use.

Learn more about Cylinder from given link

https://brainly.com/question/27440983

#SPJ1

The resistance is directly proportional to the temperature. Then resistance of platinum at 100°C IS 2.5 Ω. Then, the when the resistance becomes 9.61 ohms is 384°C. Then, the resistance at 45°C is 1.1 ohms.

Resistance in a material is the hindrance to electric current. The resistance through a material depends on the electric voltage, temperature and current.

The resistance is directly proportional to the temperature.

then given R1/T1 = R2/T2

Given the resistance at 100 °C is 2.5 ohms .

R2 = 9.6 ohms

then, T2 = R2 T1/R2

T2 = (9.6 ohms × 100°C)/2.5 ohms = 384°C.

Then, the resistance at 45 degree Celsius is calculated as follows;

R2 = (2.5 ohms × 45)/100°C = 1.1 ohms.

Therefore, the resistance of platinum at 45°C is 1.1 ohms.

Find more on resistance:

https://brainly.com/question/29427458

#SPJ1

The amount of the electric field (E) produced by a point charge with a charge of magnitude Q at a point r away from the point charge is determined by the equation E = kQ/r2.

Any sort of charge causes an electric field to be associated to a location in space. The strength and direction of the electric field are expressed by the value of E, sometimes referred to as the electric field strength, electric field intensity, or simply the electric field.

The electric field is the region of space around an electrically charged particle or object where the charge body feels force. Examples include the creation of electric fields by charges.

To know more about electric field visit:

https://brainly.com/question/8971780

#SPJ4

The value of Ka of an unknown weak acid ha, at 25°c is 0.53 x 10⁻⁸.

According to the given data,

concentration of weak acid (C) = 2.5 x 10⁻² M

[tex]P^H[/tex] = 4.94

[tex][H^+] = 10^-^P^H[/tex] = 10⁻⁴.⁹⁴

= 1.15 x 10⁻⁵ M

[tex][H^+] = \sqrt{Ka * C}[/tex]

(1.15 x 10⁻⁵ M)² = Ka x 2.5 x 10⁻² M

[tex]Ka =\frac{(1.15*10^-^5 M)^2}{2.5*10^-^2M}[/tex]

= 0.53 x 10⁻⁸

Therefore,  ka of an unknown weak acid ha, at 25°c is 0.53 x 10⁻⁸.

A weak acid is an acid that incompletely dissociates into its ions in an waterless result or water. In discrepancy, a strong acid completely dissociates into its ions in water.

The conjugate base of a weak acid is a weak base, while the conjugate acid of a weak base is a weak acid. At the same attention, weak acids have a advanced pH value than strong acids.

Learn more about Weak acid:

https://brainly.com/question/29237738

#SPJ4

Correct answer is D) Protoplanet gets spherical when larger than 100 kilometers in diameter cause increasing mass and gravity heat

As a protoplanet grows, it attracts more and more particles and debris in its vicinity through gravitational forces. As these particles and debris collide and merge, they create a mass that is concentrated at the center of the protoplanet. The mass and gravity of the protoplanet increase as it grows, and this results in a higher pressure and temperature in its interior.

As the protoplanet heats up, it becomes softer and more malleable. Gravity, which is the force that pulls objects toward each other, acts to distribute the mass of the protoplanet uniformly around its center. This leads to the formation of a spherical shape. A sphere is the most stable and uniform shape in nature, and it is the most efficient shape for distributing mass evenly.

Learn more about Protoplanet here:

https://brainly.com/question/10337469

#SPJ4

Answer:

I think about 70.

Explanation:

I hope I helped

The work done on the box by the static friction force as the accelerating truck moves a distance D to the left is negative.

The sum of the force applied to the body and the displacement of the body in the direction of that force is the work performed. A force performs positive work when the body is moved in the direction of the force applied, whereas a force performs negative work when the body is moved in the direction that is opposed to the force.

When the body's displacement in the direction of the force is zero, no work is done.

When the body is moved in the direction of the force, frictional force will provide positive work. An illustration will help you to understand this. Imagine two blocks are piled one on top of the other. There is a frictional force between the two blocks that prevents the two blocks from sliding if the bottom block begins to move slowly in one direction. This force pushes against the top block in the direction that the lower block is moving. Along with the bottom block, the higher block also travels in the direction of the frictional force. Friction therefore produces negative work in this situation.

Learn more about Work done:

https://brainly.com/question/30610646

#SPJ4

Decrease in pressure creates a net force acting on the piston, which pushes in the direction, piston inward and reduces the volume of the air inside the syringe.

When a capped syringe is plunged into cold water, the air inside the syringe will cool down and its volume will decrease. This change in volume will cause a change in presspistonure inside the syringe, which will cause the syringe piston to move in a particular direction.

Assuming that the temperature of the syringe and the water is initially in equilibrium, the pressure inside the syringe is equal to the atmospheric pressure outside the syringe. When the syringe is plunged into cold water, the air inside the syringe cools down and its volume decreases. This decrease in volume causes a decrease in the pressure inside the syringe, which is now lower than the atmospheric pressure outside the syringe. The result is a net force acting on the piston, which pushes the piston inward and reduces the volume of the air inside the syringe.

To see why this happens, we can use the ideal gas law, which states that the pressure, volume, and temperature of a gas are related by the equation PV = nRT,

[tex]P_1V_1 = nRT_1[/tex]

[tex]P_2V_2 = nRT_2[/tex]

here,

[tex]P_2[/tex] & [tex]V_2[/tex] are the final pressure and volume of the air inside the syringe.

Since the number of moles of air inside the syringe is constant, we can write:

[tex]P_1V_1 = P_2V_2[/tex]

If the volume of the air inside the syringe decreases, as it does when the syringe is plunged into cold water, then the pressure inside the syringe must also decrease. This means that the pressure inside the syringe is now lower than the atmospheric pressure outside the syringe. The result is a net force acting on the piston, which pushes the piston inward and reduces the volume of the air inside the syringe.

In summary, when a capped syringe is plunged into cold water, the air inside the syringe cools down and its volume decreases, which causes a decrease in the pressure inside the syringe. This decrease in pressure creates a net force acting on the piston, which pushes the piston inward and reduces the volume of the air inside the syringe.

To know more about Piston please refer: https://brainly.com/question/28044328

#SPJ4

Answer:

Explanation:

Wave speed = distance between two successive maxima / time for eight maxima to pass = 0.548 m / 11.4 s = 0.048 m/s

Cosmic rays are high-energy particles that originate from various sources in the universe and the most likely source of cosmic rays is supernova explosions.

When a massive star exhausts its fuel and undergoes a supernova explosion, it can release an enormous amount of energy and eject high-energy particles into the surrounding interstellar medium. These particles can be accelerated by magnetic fields and shock waves in the interstellar medium, producing cosmic rays that can travel across the universe.

While other sources like white dwarfs, condensing interstellar gases, and dormant black holes can also produce high-energy particles, they are not as likely to be significant sources of cosmic rays as supernova explosions.

To know more about cosmic rays here

https://brainly.com/question/13260847

#SPJ4