A particle of mass 16kg travelling with a velocity of 10m/s is acted upon by a steady force of friction in a direction opposite that of its motion. Find the speed of the particle after 10 seconds if the force of friction is 25N.​

An Olympic high diver has gravitational potential energy because of her height. As she dives, kinetic energy becomes of her energy just before she hits the water.

Gravitational potential energy is the energy possessed or acquired by an object due to a change in its position when it is present in a gravitational field. In simple terms, it can be said that gravitational potential energy is an energy that is related to gravitational force or to gravity.

Kinetic energy is the energy of motion, observable as the movement of an object, particle, or set of particles.

When the high diver is standing stable and not moving , that diver has a gravitational potential energy because of the height . The moment she dives , before hitting the water , from being stationary she gained some momentum and come in motion , due to motion her gravitational potential energy will change to kinetic energy before hitting the ground.

To learn more about Gravitational potential energy  here

https://brainly.com/question/15978356

#SPJ4

Answer:

oxygen expanding unjhfyysue hjdbdhdjjhd

Answer:

32 psi to 35 psi.

Explanation:

Normal tire pressure is usually between 32~40 psi(pounds per square inch) when they are cold. So make sure you check your tire pressure after a long stay and usually, you can do it in the early morning.

Explanation:

They will have not much control over their speed or rotational energy. they will carry a lot of gravitation potential energy which will get converted to kinetic energy as they fall through the atmosphere. They will reach their terminal velocity, the fastest they can travel with earth's gravity before they pull their parachute, when they use a parachute to extend their surface area, increasing wind resistance. this allows them to land safely.

The length of the colour attribute is 6 characters.

Each colour has a distinct look based on three essential characteristics: hue, chroma (saturation), and value (lightness). It's critical to use all three of these properties when describing colour to appropriately identify it and distinguish it from others.

The HTML <font> color Attribute specifies the text color within the font element. Values of Attributes: colour name: It uses the colour name to set the text colour.

It should be noticed that colours are represented by the hex triplet.

Learn more about colour attributes here:

https://brainly.com/question/18071208

#SPJ4

The form of energy  that is transferred as waste energy by the television set is heat energy (80 J).

Based on the law of  conservation of energy, energy can neither be created nor destroyed but can be converted from one form to another.

The useful energy supplied to television set is calculated as follows;

= 119 J + 1 J = 120 J

The wasteful energy of the television set is calculated as follows;

= 200 J - 120 J = 80 J

Thus, the form of energy  that is transferred as waste energy by the television set is heat energy (80 J).

Learn more about conservation energy here: https://brainly.com/question/166559

#SPJ1

the answer is the mantle.

A concave mirror is also referred to as a converging mirror and it can be defined as a type of mirror that is designed and developed with a reflective surface that is typically curved inward and away from the source of light.

Basically, one common use of a convex mirror include the following:

A convex mirror is also referred to as a diverging mirror and it can be defined as a type of mirror that is designed and developed with a reflective surface that typically bulges outward toward the source of light.

Basically, one common use of convex mirror is as rear-view mirrors in automobiles vehicles.

Read more on convex mirror here: https://brainly.com/question/24175067

#SPJ1

The average useful power output of robot is 0.0001 W

The time taken by robot to lift bricks is 630000000 sec

Given:

work done by robot = 5.5 j

time taken to do the work = 12.0 hours

weight of bricks = 3500 kg

length of bricks = 1.8 m

To Find:

The average useful power output of robot is

The time taken by robot to lift bricks is

Solution: Useful power output means the electric or mechanical energy made available for use, exclusive of any such energy used in the power production process.

P = W/t

P = 5.5/12*3600

P = 0.0001 W

So, average useful power output of robot is 0.0001 W

t = W/P

W = mgh So t = mgh/P

t = 3500x10x1.8/0.0001

t = 630000000 sec

So, time taken by robot to lift bricks is 630000000 sec

Learn more about Power output here:

https://brainly.com/question/13927045

#SPJ4

The answer is B.

We use the spring constant in Hooke's Law, which is : F = -kx

It can be rearranged so it is equal to the constant :

k = F ÷ x

Common units of Force (F) : N, kg m/s²

Common units of displacement (x) : cm, m, km

The dimensionally correct unit from the given options is :

⇒ N/km

Explanation:

answers to 1 and 2 above/below respectively but can't do 3 because I don't know what graph you're talking about

The answer is 12,500 cm³.

First, let's find the volume in m³.

Volume = Mass ÷ Density

Now, to convert from m³ to cm³ :

m³ × 10⁶ = cm³

1.car towing

2.pulling bucket of water

3.gym equipment

4.crane machine

5.tug of war

A Capacitor is a device consisting of two conductors that can be charged with equal and opposite charges, separated by a thin insulator.

According to principle of a capacitor, capacitor is a system of conductors or dielectric.

If there is a single conductor, it cannot holds very much current then its potential reaches to its maximum values and it cannot hold more charge.

If we place another conductor near it, its potential becomes low and it is able to store more charge.

We know from the definition of the capacitor, A capacitor is a two-terminal electrical device that possesses the ability to store energy in the form of an electric charge. It consists of two electrical conductors that are separated by a distance.  

Capacitors store energy by holding apart pairs of opposite charges. The simplest design for a capacitor is a parallel plate capacitor.

Therefore, this device is called a capacitor.

Learn more about capacitor:

https://brainly.com/question/13578522

#SPJ1

The speed of the particle is 1.35 * [tex]10^{4}[/tex] m /s

The de Broglie equations relate the wavelength λ to the momentum p, and frequency f to the total energy E of a particle: where h is Planck's constant.

The wavelength (λ) that is associated with an object in relation to its momentum and mass is known as de Broglie wavelength.

λ = h / p

m= mass = 6.67∗[tex]10^{-27}[/tex] Kg

λ = 7.31 pm = 7.31 * [tex]10^{-12}[/tex] m                          (1 pm = [tex]10^{-12}[/tex] m)

h= Planck's constant = 6.62∗[tex]10^{-34}[/tex][tex]m^{2}[/tex]/Kg.s

v= velocity of particle = ?

λ = h / mv

v = h / mλ

  = [6.62∗[tex]10^{-34}[/tex]] / [6.67∗[tex]10^{-27}[/tex]] [7.31 * [tex]10^{-12}[/tex]]

  = 0.135 * [tex]10^{5}[/tex] m /s.

  = 1.35 * [tex]10^{4}[/tex] m /s

Learn more about de broglie equation here :

https://brainly.com/question/15330461

#SPJ4

117 m/sec is the speed of a transverse wave in a rope of length 3. 1 m and mass 86 g under a tension of 380 n.

The wave speed v is given by

v= √τ/μ

​where τ is the tension in the rope and μ is the linear mass density of the rope.

The linear mass density is the mass per unit length of rope :

μ= m / L = (0.086 kg)/(3.1 m)=0.0277 kg/m.

v= [tex]\sqrt{ \frac{380 N}{0.0277 kg/m}}[/tex]  = 117.125 m/sec (approx. 117 m/sec

In physics, a transverse wave is a wave whose oscillations are perpendicular to the direction of the wave's advance. This is in contrast to a longitudinal wave which travels in the direction of its oscillations. Water waves are an example of transverse wave.

Transverse waves commonly occur in elastic solids due to the shear stress generated; the oscillations in this case are the displacement of the solid particles away from their relaxed position, in directions perpendicular to the propagation of the wave. These displacements correspond to a local shear deformation of the material. Hence a transverse wave of this nature is called a shear wave. Since fluids cannot resist shear forces while at rest, propagation of transverse waves inside the bulk of fluids is not possible.

Learn more about Transverse waves here : https://brainly.com/question/13761336

#SPJ4

Answer:

ig d. transmits only green light.....

Power output will be  = 637.7448 W

Newton's third law states that when two bodies interact, they apply forces to one another that are equal in magnitude and opposite in direction. The third law is also known as the law of action and reaction.

Power Output means the average rate of electric energy delivery during one Metering

The upward force by which the bicycle is riding up will be equal and opposite to m*g*sin(10°) (using newtons third law)

Force (upward ) =  m*g*sin(10°)

given

v = 4.4 m/s

mass (m) = 85 kg

F (upward ) =  m*g*sin(10°)

ma =  m*g*sin(10°)

a = g*sin(10°)

  = 9.8 * sin(10°)  = 1.7052 m / [tex]s^{2}[/tex]

Power = work / time = Force . displacement / time = mass * acceleration * velocity

           = m * a * v

           = 85 * 1.7052 * 4.4

           = 637.7448 W

To learn more about Newton's third law  here

https://brainly.com/question/23772134

#SPJ4

The average velocity of the car in m/s for the first leg is 36.2 m/s and the average velocity (in m/s) for the total trip is 7 m/s

Speed is the distance travelled per time taken. The S.I unit is m/s. The average speed is the ratio of the total distance travelled to the to time taken. While velocity is the distance travelled in a specific direction per time taken

Given that a race car traveling northward on a straight, level track at a constant speed travels 0.760 km in 21.0 s. The return trip over the same track is made in 26.0 s.

(a) The average velocity of the car in m/s for the first leg of the run will be

Velocity = (0.760 x 1000)/ 21

Velocity = 760 / 21

Velocity = 36.2 m/s

(b) The average velocity (in m/s) for the total trip will be

36.2 - (0.760 x 1000)/ 26

36.2 - (760) / 26

36.2 - 29.2

7 m/s

Therefore, the average velocity of the car in m/s for the first leg is 36.2 m/s and the average velocity (in m/s) for the total trip is 7 m/s

Learn more about Speed here: https://brainly.com/question/4931057

#SPJ1

The electron in a ground-state H atom absorbs a photon of wavelength 97. 25 nm.  Energy level till where the electron move is 4

Rydberg's equation is formula which signifies relation of wavelength of incident photon and the energy level.

Rydberg's equation is used to find out the relation between the wavelength and the Energy Levels:

1/λ = RZ² (1/n₁² - 1/n₂²)

where, λ is wavelength = 97.25 nm

           R is the Rydberg constant = 1.0967 × 10⁷ m

           n₁ is the initial energy level i.e. the Ground state, n₁  = 1

           n₂ is the higher energy level

On substitution of the above value:

1/97.25 × 10⁻⁹ = 1.0967 × 10⁷ ( 1 -  1/n₂²)

On solving,

⇒ n₂ = 4

Hence, the higher energy level is 4

Learn more about Energy Level here, https://brainly.com/question/17396431

#SPJ4

The height of the 500-mb pressure level plotted at North Platte (LBF) in western Nebraska was 5,570 meters  m above sea level.

Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.

Recalling that the heights plotted at individual stations on 500-mb maps are in tens of meters (place a 0 to the right of the three plotted digits).

The coded height at North Platte, in west-central Nebraska, ("557") indicated 500 mb occurred at 5,570 meters above sea level.

Thus, The height of the 500-mb pressure level plotted at North Platte (LBF) in western Nebraska was 5,570 meters  m above sea level.

Learn more about pressure here: https://brainly.com/question/25736513

#SPJ1

The answer is heat radiates at a rate of 160w.

What is emissivity?

A substance's emissivity is a measure of how well it reflects heat radiation from its surface. Infrared radiation, which cannot be seen by human eyes, as well as visible radiation (light) are both examples of thermal radiation, which is electromagnetic radiation. The Stefan-Boltzmann law defines emissivity as the quantitative ratio of a surface's thermal radiation to that of an ideal black surface at the same temperature. The ratio is in the range between 0 and 1.

what is energy radiation?

The ability of a substance to reflect heat radiation from its surface is measured by its emissivity. The material's surface emissivity and the temperature difference between the chip surface and the surrounding air are two factors that affect power dissipation in the form of radiation.

To learn more about emissivity :

https://brainly.com/question/10283285

#SPJ4

Potential and kinetic energy are at play when we talk about Newton's second law of motion through the various positions in relation to the bodies involved.

This law states that force is equal to the rate of change of momentum and is denoted as F = mv where m is mass and v is velocity.

Potential energy is the energy is possessed by a body by virtue of its position while kinetic energy is possessed by a body by virtue of its motion. Both forms of energy are influenced by forces and are equal to the total momentum.

Read more about Newton's second law of motion here https://brainly.com/question/2009830

#SPJ1

Answer:

[tex] \boxed{\sf54 \: kobo}[/tex]

Explanation:

Energy = Power × Time

Energy = 900× 4 ×5 = 18000 wh

Energy = 18000 wh = 18 kwh

Cost of 1 unit electricity = 3 kobo

cost of 18 unit electricity= 18 × 3 = 54 kobo

Answer:

54 Kobo

Explanation:

Units of electricity are measured in kilowatt hours (kWh).

Given information:

Convert the wattage of the electric iron from watts to kilowatts.

1000 watts (W) = 1 kilowatt (kW)

⇒ 900 watts = 1 ÷ 1000 = 0.9 kilowatts

This means that the power consumption of the electric iron is 0.9 kW per hour of use.

Total hours spent pressing clothes:

= 4 hours per week for 5 weeks

= 4 × 5

= 20 hours

Total power consumption:

= number of kW × number of hours

= 0.9 × 20

= 18 kWh

To find the total cost, multiply the total kWh by the cost per kWh:

⇒ Cost = 18 × 3 = 54 Kobo

Answer:

See below

Explanation:

X component = 120 * cos 35° =  98.298 m/s

Y component = 120 * sin 35° = 68.829 m/s

Any object launched into space with only gravity acting on it is referred to as a projectile. Gravity is the main force affecting a projectile. The x and y components of the velocity vector are 98.298 m/s and 68.829 m/s.

When a particle is thrown obliquely close to the Earth's surface, it travels along a curving route while experiencing constant acceleration. Always pointing in the direction of the Earth's center is this curving path. Such a particle's motion is referred to as projectile motion, and its trajectory is known as the projectile's trajectory.

The components of the projectile are:

X component = 120 × cos 35° =  98.298 m/s

Y component = 120 × sin 35° = 68.829 m/s

To know more about projectile, visit;

https://brainly.com/question/29545516

#SPJ7

Answer:

Explanation:

MLT^-2

.....

An electric dipole consists of a particle with a charge of 6 x 10⁻⁶ c at the origin and a particle with a charge of –6 x 10⁻⁶ c on the x axis at x = 3 x 10⁻³ m. Its dipole moment is 18 x 10⁻⁹ Cm

Dipole moment of a dipole is dependent on the charge of the dipole and the distance between the two charges.

Electric Dipole consists of two charges which are equal and opposite in charge i.e. positive and negative charges.

Given,

Dipole moment, p = ?

Charge, q = 6 x 10⁻⁶C

Distance between charges, d = 3 x 10⁻³ m

Dipole moment (p) is given by:

p = charge x distance between the two charges

p = 6 x 10⁻⁶ x 3 x 10⁻³ Cm

p = 18 x 10⁻⁹ Cm

The dipole moment for the given charge configuration is 18 x 10⁻⁹ Cm

Learn more about Dipole moment here, https://brainly.com/question/14058533

#SPJ4

Answer:

Odd and even

Explanation:

Odd and even numbers have no common elements

The value of Q will be -8 C.

In the presence of an electric or magnetic field, matter experiences a force due to its electric charge.

A moving electric charge generates a magnetic field, and an electric charge has an accompanying electric field.

The information provided in the issue is;

The separation between and is 2m.

The separation between and is 2m.

An origin charge equals +2 C

The electric fields are identical in magnitude but are facing in different directions. As a result, the following relationship can be used

Q/16=1/2

The value of Q will be -8 C.

Learn more about electric charge here

brainly.com/question/8163163

#4174

Th value of q is= -8C

Here, To calculate the value of q we use the formula,

The E-field due to a point charge = [tex]\frac{k\times Q}{D^{2} }[/tex]

Here we are given,

D= the distance along the axes.

k= The coulomb's constant.

We have to find, the charge along the axes = Q

Now, we have to substitute the known values in that equation for the cases,

For the E-field at x=-2 to equal 0, the E-fields from both charges must be equal in magnitude and opposite in direction.

For the first case,  E from +2C charge = [tex]\frac{k\times Q}{D^{2} }[/tex] = [tex]\frac{k\times (+2C)}{2^{2} }[/tex]=[tex]\frac{k\times (+2C)}{4 }[/tex].

For the second case,  E from Q charge= [tex]\frac{-k\times Q}{D^{2} }[/tex]=[tex]\frac{-k\times Q}{(2+2)^{2} }[/tex]=[tex]\frac{-k\times Q}{16 }[/tex].

Now, Comparing the two cases we can find that,

[tex]\frac{k\times (+2C)}{4 }=\frac{-k\times (Q)}{16}[/tex]

Or,[tex]\frac{+2C}{4}= \frac{-Q}{16}[/tex]  (Eliminate k from both sides of the equation.)

Or,[tex]Q=-8C[/tex]

So, from the above calculation we can conclude that,

The value of q is -8C.

Learn more about Charges:

https://brainly.com/question/18102056

#SPJ4

If the electric potential at a point in space is zero, then the electric field at that point must be zero.

To find the answer, we have to know about the electric field.

                       [tex]E=\frac{V}{L}[/tex]

Thus, we can conclude that, If the electric potential at a point in space is zero, then the electric field at that point must be zero.

Learn more about the electric field here:

https://brainly.com/question/27752270

#SPJ4