a plane electromagnetic wave has an average power per unit area of 153 w/m2 . a flat, rectangular surface, 18.2 cm by 45.1 cm, is placed perpendicular to the direction of the plane wave. if the surface absorbs half the energy and reflects half, calculate the net energy absorbed in 1.22 min. answer in units of j.

Answers

Answer 1

Knowing the power of the units and the electromagnetic waves is necessary to calculate the net energy unit.

What is power?

Power is the work completed in a given amount of time or time spent working. The joules per second (J/s)-based SI power unit is the Watt (W). Horsepower (hp), roughly equal to 745.7 watts, is sometimes used to describe the power of machines like motor vehicles.

What are electromagnetic waves?

Magnetic and electric fields vibrate together to produce electromagnetic waves, also known as EM waves. In other words, oscillating magnetic and electric fields make up electromagnetic waves (EM).

P=I*A=t=E/t

E=I*A*T

I= 153W/M^2

A=18.2*45.1*10^-4

A=0.082082

t=1.22mins = 1.22*60^S

t= 73.2

applying the formula E=I*A*T

E= 919.2855j

Therefore, the net energy absorbed in 1.22 min is 919.285j.

Learn more about Power from the given link.

https://brainly.com/question/1634438

#SPJ4


Related Questions

in a solar system far, far away the sun's intensity is 200 w/m2 for an inner planet located a distance r away. what is the sun's intensity for an outer planet located at a distance 6 r from the sun?

Answers

The sun's intensity for an outer planet located at a distance 6r from the sun is 5.55 W/m². The result is obtained by using the inverse square law formula.

What is the Inverse Square Law formula?

The Inverse Square Law formula describes the intensity of light is inversely proportional to the square of the distance. It can be expressed as

[tex]\frac{I_{1} }{I_{2} } = \frac{d_{2}^{2} }{d_{1}^{2}}[/tex]

Where

I₁ = Intensity at distance 1 (W/m²)I₂ = Intensity at distance 2 (W/m²)d₁ = distance 1 from a light source (m)d₂ = distance 2 from a light source (m)

Given the case the sun's intensity is 200 W/m² for an inner planet at the distance r. If an outer planet is at a distance 6r, what is the sun's intensity?

By using the inverse square law formula, the sun's intensity for an outer planet is

[tex]\frac{I_{1} }{I_{2} } = \frac{d_{2}^{2} }{d_{1}^{2}}[/tex]

[tex]\frac{200 }{I_{2} } = \frac{(6r)^{2} }{r^{2}}[/tex]

[tex]\frac{200 }{I_{2} } = \frac{36r^{2} }{r^{2}}[/tex]

[tex]I_{2} = \frac{200} {36}[/tex]

I₂ = 5.55 W/m²

Hence, the sun's intensity for a planet at a distance 6r from the sun is 5.55 W/m².

Learn more about intensity of light here:

brainly.com/question/13155277

#SPJ4

you pull a box with a constant force of 250 n. the box moves 10 m along a straight path on a rough surface at a constant speed. how much thermal energy is generated in the system of the box and the rough surface?

Answers

The thermal energy of the box which is pulled with a force of 250 N to a distance of 10 meters is 2500 J

The force to pull the box = 250 N

The box is moved to a distance of 10 meters

The thermal energy can be found using the formula,

                    W = F x d

where W is the thermal energy

           F is the Force

           d is the distance moved

Let us substitute the known values in the above equation, we get

                      W = 250 x 10

                          = 2500 J

Therefore, the thermal energy of the box is 2500 J

Learn more about the thermal energy in

https://brainly.com/question/11278589

#SPJ4

a solenoid of length 1.50 cm and radius 0.550 cm has 37 turns. if the wire of the solenoid has 1.15 amps of current, what is the magnitude of the magnetic field inside the solenoid? magnitude of the magnetic field: t ignoring the weak magnetic field outside the solenoid, find the magnetic energy density inside the solenoid. magnetic energy density: j/m3 what is the total magnetic energy inside the solenoid? total magnetic energy: j

Answers

a) magnitude of the magnetic field = 8.02 X [tex]10^{-3}[/tex] T

b)Energy Density = 5.03 J/[tex]m^{3}[/tex]

c) Total magnetic energy inside the solenoid = 2.01 X [tex]10^{-5}[/tex] J

What is magnetic field?A magnetic field, a vector field in the vicinity of a magnet, an electric current, or a changing electric field in which magnetic forces can be observed. Magnetic fields, such as those found on Earth, cause magnetic compass needles and other permanent magnets to align in the field's direction. Magnetic fields cause electrically charged particles to move in a circular or helical pattern. The operation of electric motors is based on this force, which is exerted on electric currents in wires in a magnetic field. 

Calculation

a) B = uNI/L

B = (4π X [tex]10^{-7}[/tex])(37)(1.15)/(.015)

B = 8.02 X [tex]10^{-3}[/tex] T

b) Energy Density = [tex]B^{2}[/tex]/2u

Energy Density = [tex](8.02 *10^{-3} )^{2}[/tex]/(2)(4π X [tex]10^{-7}[/tex])

Energy Density = 5.03 J/[tex]m^{3}[/tex]

c) Total magnetic energy inside the solenoid

Multiply by volume for total energy.

Total Energy = 5.03(π[tex]r^{2}[/tex])(L)

Total Energy = (5.03)(π)[tex](8.5*10^{-3})^{2}[/tex])(.015)

Total Energy = 2.01 X [tex]10^{-5}[/tex] J

To learn more about magnetic field, refer to

https://brainly.in/question/2249258

#SPJ4

a)The  magnitude of the magnetic field [tex]$=\mathbf{8 . 0 2} \times 10^{-3} \mathbf{T}$[/tex]

b)The  Energy Density [tex]$=\mathbf{5 . 0 3} \mathrm{J} / \mathrm{m}^3$[/tex]

c) Total magnetic energy inside the solenoid [tex]$=\mathbf{2} . \mathbf{0 1} \mathbf{X} 10^{-5} \mathbf{J}$[/tex]

What is magnetic field?A magnetic field, a vector field in the vicinity of a magnet, an electric current, or a changing electric field in which magnetic forces can be observed.Magnetic fields, such as those found on Earth, cause magnetic compass needles and other permanent magnets to align in the field's direction.Magnetic fields cause electrically charged particles to move in a circular or helical pattern.The operation of electric motors is based on this force, which is exerted on electric currents in wires in a magnetic field.

a) [tex]$B=u N I / L$[/tex]

[tex]&B=\left(4 \pi \times 10^{-7}\right)(37)(1.15) /(.015) \\[/tex]

[tex]&B=8.02 \times 10^{-3} \mathrm{~T}[/tex]

b) Energy Density[tex]$=B^2 / 2 \mathrm{u}$[/tex]

Energy Density[tex]$=\left(8.02 * 10^{-3}\right)^2 /(2)\left(4 \Pi \times 10^{-7}\right)$[/tex]

Energy Density [tex]$=5.03 \mathrm{~J} / \mathrm{m}^3$[/tex]

c) Total magnetic energy inside the solenoid

Multiply by volume for total energy.

Total Energy [tex]$=5.03\left(\pi r^2\right)(\mathrm{L})$[/tex]

Total Energy [tex]$\left.=(5.03)(\pi)\left(8.5 * 10^{-3}\right)^2\right)(.015)$[/tex]

Total Energy [tex]$=2.01 \times 10^{-5} \mathrm{~J}$[/tex]

To learn more about magnetic field, refer to

https://brainly.com/question/18498949

#SPJ4

What is the potential difference measured if the following voltmeter (refer to picture) is used and connected to the circuit via the 3V terminal?

Answers

The potential difference measured if the given voltmeter is used and connected to the circuit via the 3V terminal is 1.4 V.

The reading of voltmeter is taken for the row with 0, 1, 2 and 3 values. Each  line indicates 0.1 volts. The distance between each smaller lines indicates 0.2 volts and the distance between each longer lines indicates 0.2 volts.

A voltmeter is a device used to measure the potential difference between two points in a circuit. Potential difference is also called as voltage. Its unit is volts.

V = IR

V = Voltage

I = Current

R = Resistance

Therefore, the potential difference measured is 1.4 V

To know more about voltmeter

https://brainly.com/question/1511135

#SPJ1

if the blocks are released from rest, which way does the 10 kgkg block slide, and what is its acceleration? enter a positive value if 10 kgkg block accelerates up the ramp, and a negative value otherwise.

Answers

The acceleration is -0.48m/s².

Explain what an acceleration is.

Acceleration is the rate of change in both speed and direction of velocity over time. Anything is said to have been accelerated when it goes faster or slower in a straight line.

Suppose that θ=35°

First, you need to set up equations for both blocks.

Let m₁ be 10kg and m₂ be 5kg and for our computations suppose right is positive and up is positive

For m₁ the solution is:

Sigma Fx = ma

T - m₁gsin35 = m₁a

where T = tension

For m₂

m₂g - T = m₂a

Add the two equations together

m₁a + m₂a = T-m₁gsin35 + m₂g - T

a(m₁ + m₂) = m₂g - m₁gsin35

a= (5×9.8 - 10×9.8×sin35)/(10 + 5)

a= -0.48m/s².

To know more about acceleration visit:

https://brainly.com/question/7197347

#SPJ4

The first step in the proton-proton chain produces an antielectron, or positron. What happens to the positron?.

Answers

In the first step in the proton-proton chain, the positron gets rapidly converted to energy when it meets a standard electron, leading to matter-antimatter annihilation.

The positron is an antiparticle or antimatter counterpart of the electron. It persists an electrical charge of +1e, a spin of 1/2, and a mass identical to the mass of the electron. When a positron collides with an electron, destruction occurs. If this collision is at low energies, it leads to the production of two or more photons. They're created by radioactive decay or by the pairing of two protons at high energies.

The proton-proton chain is a nuclear fusion. The proton-proton fusion is initiated only when the kinetic energy of the proton is high enough to undergo the electrostatic repulsion.

Learn more about Nuclear fusion here https://brainly.com/question/25190319

#SPJ4

is training for cross country in the fall she ran 5 miles east then she turned and ran 5 miles west. draw and label the vectors that show each segment of her tripand the resulant dispacement vector. find her resulant displacement

Answers

5j-5i is her resultant displacement.

velocity in east= 5i

velocity in west=5j

resultant magnitude=√5i+√5j

displacement =5j-5i

Displacement is the shortest distance, but distance is the length of everything covered. A vector quantity with a magnitude and a direction is displacement. The vector (or straight line) separation between an initial and final position is described by this term. Therefore, all that is needed to determine the resulting displacement is to know these two positions.

Calculate the inverse tangent of the ratio of the components of the displacement in the y- and x-directions to find the direction of the displacement vector.

To know more about  displacement   visit : brainly.com/question/11934397

#SPJ9

Dear People Please Answer this questions
(1) When we whirl a stone round, What type of motion is executed ?
(2) Is the direction of the ball is same at every point?
(3)What are the factors that affect the change in direction?
(4)What causes for those changes?

please please please help me or I will get suspended !!!!!

I want expert to answer

Answers

1)

Circular Motion

2)

No; the direction changes.

3)

Velocity. Gravitational Pull. Force/Twist. Acceleration.

4)

The weight of the object, gravity pulling on it. The kinetic energy produced by you which caused acceleration in a certain vector direction. Location of the object.


Major activity injuries include
Bone breaks
Concussions
Joint Dislocations
All of the above

Answers

Explanation:

Major activity injuries include:

Bone breaksConcussionsJoint DislocationsAll of the above

Ansver:

All of the above

Which statement best shows that waves can carry energy?

Sounds can be recorded.
A rainbow shows a spectrum of colors.
You feel vibrations if loud sounds are played.
Light shining through some trees makes shadows.

Answers

The statement that best shows that waves can carry energy is option d: light shining through some trees makes shadows.

What is the most accurate way to define sound waves?

A sound wave is the pattern of disruption brought on by the movement of energy moving through a medium as it propagates away from the source of the sound (such as air, water, or any other liquid or solid matter). Pressure waves are produced when an object vibrates, such as a ringing phone, and these waves are known as sound waves.

Therefore, note that the energy of a sound wave is transferred through particle contact. A vacuum cannot be traversed by a sound wave. Sound is now a mechanical wave as a result.

Learn more about energy from

https://brainly.com/question/28721810
#SPJ1

if each resistor is rated at 0.2 w (maximum without overheating), what is the maximum voltage that can be applied across the whole network?

Answers

The maximum voltage that can be applied to the whole network is 39.46V.

What is the relationship between power and voltage?

The explanations given here are that Power equals current times Voltage (P=VxI), Voltage equals Power divided by current (V=P/I), and current equals Power divided by Voltage (I=P/V).

Power and Voltage:

The equation for the relationship between power, resistance, and voltage is

P = V²/R

P is for power,

R stands for resistance,

and V for voltage.

Given that the resistors

V = [tex]\sqrt{PR}[/tex]

Consequently, the maximum voltage for the 2.8k resistor will be:

V = [tex]\sqrt{(0.2)(2800)}[/tex]

V = 23.66V

The maximum voltage for the 2.1k resistor will be similar:

V = [tex]\sqrt{(0.2)(2100)}[/tex]

V = 20.49V

This is lower than the 2.8k resistor's maximum voltage.

The voltage between the 2.8k and 2.1k resistors must be same because they are connected in parallel.

The highest voltage that can be applied across this parallel configuration is 20.49V since a voltage of 23.66V would be too high for the 2.1k resistor to handle.

Similarly, the voltage drop across the series-connected 1.8 k resistor is:

V = [tex]\sqrt{PR}[/tex]

V = [tex]\sqrt{(0.2)(1800)}[/tex]

V = 18.97V

Consequently, the highest voltage that can be used over the entire network is

20.49V + 18.97V = 39.46V

To know more about power and Voltage visit:

https://brainly.com/question/14789695

#SPJ4

Which is an outer planet in our solar system?

A.Earth
B.Jupiter
C.Mars
D.Venus

Answers

Question:

Which is an outer planet in our solar system?

Answer:

B. Jupiter

Answer: Jupiter

Explanation: As its situated outside the asteroid belt

(a) how many minutes does it take a photon to travel from the sun to the earth? (b) what is the energy in ev of a photon with a wavelength of 558 nm? (c) what is color of light with this wavelength? (d) what is wavelength of a photon with an energy of 1.00 ev? please show the solution.

Answers

To known about all the answers, we first known about the photon and wavelength concept.

What is a photon?

A tiny energy packet of electromagnetic radiation is called a photon, referred to as a light quantum. Albert Einstein proposed the existence of discrete energy packets during the transmission of light in his 1905 description of the photoelectric effect, which gave rise to the photon concept.

What is wavelength?

A waveform signal's wavelength is the separation between two identical points (adjacent crests) in adjacent cycles as the signal travels through space or along a wire. This length in wireless systems is typically specified in meters (m), centimeters (cm), or millimeters (mm).

a)  Distance between the earth and the sun is

   1.5*10^N

Speed of photon = 3*10^8m|s

Time= distance/speed

   = 1.5*10^11m/3*10^8m|s

   = 0.5*10^3 second

   = 500 sec

  = 8.3 minutes.

b) energy of the photon is given by

E=hc/⋋

h= planks constant – 4.14* 10^15 eVs

c= Speed of light- 3*10^8 m/s

⋋= 558 nm= 558* 10^9 m

E= 4.14* 10^15 eVs* 3*10^8 m/s /558* 10^9 m

E= 2.23 eV

c) Wavelength color

495–570 nm for green. 570–590 nm for yellow. Orange (590–620 nm). Red: 620-750 nm

d) Let the wavelength be ⋋

We know E=hc/⋋

1 eV= 4.14*10^-15 eVs* 3*10^8m/s/⋋

⋋ = 12.42*10^-7m

⋋ = 1242 nm.

Therefore, Distance between the earth and the sun is 8.3 minutes. Energy of the photon is given by 2.23 eV. Wavelength color is green or yellow. The wavelength be ⋋ is 1242 nm.

Learn more about Photon from the given link.

https://brainly.com/question/17227537

#SPJ4

A 1,286-kg car is skidding to a stop along a horizontal surface. The car decelerates from 26.9 m/s to rest in 9.36 seconds. How far did the car skid before coming to rest?

Answers

Answer:

Explanation:

Given:

M = 1 260 kg

V₀ = 26.9 m/s

V = 0 m/s

Δt = 9.36 s

___________

L - ?

1)

Vehicle acceleration:

a = (V - V₀) / Δt )  = (0 - 26.9) / 9.36  ≈ - 2.87 m/s²

2)

Braking distance of the car:

L = (V² - V₀²) / (2·a)

L = ( 0² - 26.9²) / (2·(-2.87)) ≈ 121 m

how many high voltage cables supply electrical power to the hv components at the front of the vehicle?

Answers

Option B. Can be charged to full capacity by using a special dealer-only high-voltage charger.

Voltage is the strain from an electrical circuit's energy source that pushes charged electrons (modern-day) through and engages in the loop, allowing them to do paintings inclusive of illuminating light. In quick, voltage = strain, and it's far measured in volts (V).

Voltage, also called an electric-powered strain, electric-powered anxiety, or ability distinction is the difference in electric-powered capacity between two factors. In a static electric field, it corresponds to the work needed in step with a unit of charge to move a take a look at the rate among the 2 points.

Voltage, also called electromotive force, is absolutely electricity consistent with unit fee. In different phrases, voltage is the difference in electric-powered capacity among factors. contemporary is just the rate of drift of electrical fee.

Learn more about voltage here:-https://brainly.com/question/1176850

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

how many high-voltage cables supply electrical power to the hv components at the front of the vehicle?

A. Using the ICE to turn the motor/generator to fully charge the HV battery

B. Can be charged to full capacity by using a special dealer-only high-voltage charger

C. Operating the ICE at idle after returning from a trip

va car with a mass of 950-kg and a speed of 22 m/s approaches the intersection from the west. a 1300-kg minivan traveling 15 m/s approached the intersection from the south. after the collision two cars move together. what is their speed and direction of the velocity?

Answers

The final speed of the car and minivan is 17.95 m/s

The mass of the car = 950 kg

The speed of the car = 22 m/s

The mass of the minivan = 1300 kg

The speed of the minivan = 15 m/s

The final speed of the car and minivan can be found using the conservation of momentum formula,

                 [tex]\displaystyle m_{1}v_{i1 } + m_{2}v_{i2} = m_{1}v_{f1} + m_{2}v_{f2}[/tex]

where [tex]\dispplaystyle m_{1}[/tex] is the mass of the car

           [tex]\dispplaystyle m_{2}[/tex] is the mass of the minivan

           [tex]\dispplaystyle v_{i1}[/tex] and [tex]\dispplaystyle v_{i2}[/tex] is the initial speed of the car and minivan respectively.

          [tex]\dispplaystyle v_{f1}[/tex] and [tex]\dispplaystyle v_{f2}[/tex] is the final speed of the car and minivan respectively.

As the two cars move together, they would have the same final speed, i.e.

                    [tex]\dispplaystyle v_{f1} = \dispplaystyle v_{f2} = \dispplaystyle v_{f}[/tex]

Thus, the above equation becomes,

                      [tex]\displaystyle m_{1}v_{i1 } + m_{2}v_{i2} = (m_{1} + m_{2})v_{f}[/tex]

Let us substitute the known values in the above equation, we get

                       (950 x 22) + (1300 x 15) = (950 + 1300) [tex]\displaystyle v_{f}[/tex]

                                  20,900 + 19.500 = 2,250 [tex]\displaystyle v_{f}[/tex]

                                                  40,400 = 2,250[tex]\displaystyle v_{f}[/tex]

                                     40,400 / 2,250 = [tex]\displaystyle v_{f}[/tex]

                                                               = 17.95 m/s

Therefore, the final speed is 17.95 m/s

Learn more about the conservation of momentum in

https://brainly.com/question/1603406

#SPJ4

A 0.90-kg block initially at rest on a frictionless, horizontal surface is acted upon by a force of 3.0 n for a distance of 3.0 m. how much farther would the force have to act for the block to have 56 j of kinetic energy?

Answers

The force would have to work on the block till a distance of 15.66m farther to have 56 joules of kinetic energy.

The work done is given by the product of the force applied and the distance covered along the direction of force.

So we can write,

W = F.s

Where w is the work done if is the force and S is the distance covered.

According to work energy theorem, the work done is equal to the change in kinetic energy.

The force applied in this case is 3 Newton and the body has no till a distance of 3m. Let us assume that the block is moved till a distance x in order to achieve a kinetic energy of 56 joules.

So, it can be written,

3(3+x) = 56

Solving,

9+3x = 56

3x = 47

x = 15.66 m.

So, it is required to move the body by a distance of 15.66 m.

To know more about kinetic energy, visit,

https://brainly.com/question/25959744

#SPJ4

Evidence card 2: Repelling magnets it was harder to push the magnets together as they got closer together.

What affects the amount of potential energy stored in the magnetic field when a magnet is moved against a magnetic force?

Answers

The  thing that affects the amount of potential energy stored in the magnetic field when a magnet is moved against a magnetic force is by the strength of the magnet as well as the distance that another magnet or magnetic object is said to be from it.

What aspects of magnetic potential energy affect it?

Potential energy between two magnets will depend on their orientation as well as their proximity to one another and their distance from one another. If the opposing poles are kept apart, the potential energy will increase with increasing distance and decrease with increasing proximity.

More energy is transferred to the magnetic field when an object is moved against a stronger magnetic force. Near magnets, magnetic forces are stronger.

Therefore, The power of the magnet and the separation from other magnets or magnetic objects have an impact on how much potential energy is held in the magnetic field.

Learn more about potential energy from

https://brainly.com/question/14383738
#SPJ1

cords of connective tissue that connect MUSCLES TO BONES

Answers

Answer:

Tendon

Explanation:

Tendons are a type of connective tissue that attach muscle to bone. Hope this helps! :)



7) Your Grandma is following behind you on the trip to Dallas, but she refuses to drive
faster than 60 miles per hour. If she drives at that speed for the entire trip, how much
later will she arrive in Dallas

Answers

Answer:

Grandma will arive [tex]\frac{1}{2}[/tex]hr later

Explanation:

[tex]s=20\\d=210 mi|\\ s=70 mi|h \\ \\ \frac{60}{1} =\frac{210}{+} = 3.5 hrs[/tex]

you hear a loud noise at 900 hz and look up to see a bird diving toward you. you are able to identify the type of bird and you know that they usually make noise at around 800 hz. how fast is the bird moving?

Answers

When you hear a loud sounds at 900 Hz and look up to see a bird diving frequency you, the bird is moving at a speed of 38.12 meter's per second (m/s). Knowing the species of bird and that their frequency.

When this frequency range is overused, the result might be honky or nasal. The teacher from the Charlie B. series serves as this range's audio guide.

Auditory identification of birds can be done by birders who are familiar with the various bird speed. A keen birder might start looking for nearby birds of prey after hearing an alarm cry, whereas someone who hears speed a begging call would start looking for a nest that is well-hidden.

f1=f(V+Vo/V-Vs)\s900/800=(343/343-Vs)

V=38.12 m/s

Learn more about speed here

https://brainly.com/question/13948890

#SPJ4

a 1571-kg submarine rises straight up toward the surface. seawater exerts both an upward buoyant force of 14,848 n on the submarine and a downward resistive force of 947 n. what is the submarine's acceleration?

Answers

the submarine's acceleration is 0.95  m/sec²

Total force on submarine   =    14848 -  (1571 * 9.8 + 947)

                                          =   -1494.8  N

=>    submarine's acceleration  =  F/m

                                                 =    1494.8/1571

                                                =  0.95  m/sec²

acceleration is the rate of change in both speed and direction of velocity over time. When something moves faster or slower in a straight line, it is said to have been accelerated. Because the direction is constantly shifting, motion on a circle accelerates even when the speed is constant. Both effects add to the acceleration for all other types of motion.

It is a vector quantity because acceleration has both a magnitude and a direction. Another vector quantity is velocity. The velocity vector change over a given period of time, divided by that period of time, is the definition of acceleration. The upper limit of the ratio of velocity change provides instantaneous acceleration (at a specific time and place).

Learn more about acceleration here:

https://brainly.com/question/591649

#SPJ4

An object i aid to be poitively charged if it number of electron i greater than the number of proton

Answers

An object I aid to be positively charged if it has a number of electrons i greater than the number of protons. TRUE

If an object has extra protons than electrons, then the internet fee on the item is fantastic. If there are extra electrons than protons, then the net charge at the item is bad. If there are equal numbers of protons and electrons, then the object is electrically impartial.

An electrical price is created while electrons are transferred to or removed from an object. because electrons have a bad charge, while they are added to an item, it turns negatively charged. when electrons are removed from an object, it will become undoubtedly charged.

A positively charged object has misplaced electrons. A definitely charged object has won protons. A negatively charged item has lost protons. If the variety of electrons is greater than the range of protons, the particle is a negative ion, also referred to as an anion.

Learn more about electrons here:-https://brainly.com/question/860094

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

An object I aid to be positively charged if it has a number of electrons i greater than the number of a proton. TRUE/FALSE

a mass m at the end of a massless rod of length l swings as a pendulum with two horizontal springs for negligible mass and spring constants k1 and k2 acting on it. both springs are relaxed when the rod is vertical. what is the period of small oscillations? [from feynman exercises in physics]

Answers

The answer is T = 2π/ω

Further complete solution is in png format.

Help!!! 23 points label these as Element, compound, mixture of elements, and mixture of compounds

Answers

The given images are labelled as either element, compound, mixture of elements or mixture of compounds accordingly.

The answers are marked according in order of the images as follows:

ElementsCompoundsMixture of elementsMixture of compoundsCompoundsCompounds

If there are only single type of atoms present without being in contact with another atom, it is called as elements. If one atom is in contact with another atoms it is a compound. If there are more than one type of element, it is a mixture of elements. If there are more than one type of compound, it is a mixture of compounds.

Therefore, the given images are labelled as either element, compound, mixture of elements or mixture of compounds accordingly.

To know more about elements and compounds

https://brainly.com/question/13516179

#SPJ1

A 100.0 g arrow is pulled back 30.0 cm against a bowstring. The bowstring's spring constant is
1250 N/m. What speed will the arrow have when it leaves the bowstring if the arrow is shot horizontally?

Answers

Velocity of the arrow while leaving the bow is 33.54 m/s.

What is kinetic energy?

Kinetic energy is the energy that an object has when it is in motion. If you want to accelerate an object you have to apply a force. To add strength, we need our work. When the work is done, the energy is transferred to the object and it moves at a new constant speed.

Energy stored in the string = Kinetic energy of the arrow.

1/2(ke²) = 1/2(mv²)

Where k = spring constant of the bowstring

e = extension

m = mass of the arrow

v = velocity of the arrow.

Let's make v the subject of this equation

v = √(ke²/m)

Given: k = 1250 N/m

e = 30 cm or 0.3 m

m = 100 g or 0.1 kg

Substitute the values into the equation:

v = √(1250×0.30²/0.1)

v = √(1125)

v = 33.54 m/s

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ1

5. The acceleration of gravity at Hartford, Connecticut, is 9. 80336 m/s².

What is the gravitational force acting on a. 25000 kg mass at this

location?

Answers

The gravitational force acting on 25000 kg mass at a given location is 2.45 × 10⁵ N.

What is gravity?

Gravity can be described as an attractive force on a body towards the center of the earth. Every object having mass applies some force or gravitational pull on another object having mass. Gravity is responsible for the planets in orbit around the sun.

Given, the mass of the object, m = 25000 Kg

The acceleration of gravity at Hartford, Connecticut, g =9.80336 m/s²

The gravitational force acting on the given mass at this location is given by:

F = mg

F = 25000 Kg × 9.80336 m/s²

F = 245084 N

F = 2.45 × 10⁵ N

Learn more about gravity, here:

brainly.com/question/1479537

#SPJ1

if you wish to reconstruct a complex wave from its fourier spectrum, what additional information must you obtain, other than the amplitudes of the harmonics?

Answers

In order to reconstruct a complex wave from its fourier spectrum, we must obtain the phase of each harmonic other than amplitudes of the harmonics.

The phase of each harmonic is needed because it tells you exactly where in time the harmonic will occur.

For example, if a wave has a frequency of 100 Hz, and you know that the phase of each harmonic is regularly spaced by 1 radian (180 degrees), then you can use this information to determine when each harmonic will occur. You can do this by dividing 360 degrees by the frequency and multiplying by 2 pi.

To learn more about fourier spectrum visit: https://brainly.com/question/15830034

#SPJ4

On level ground, how much farther can a person jump on the moon as compared to the earth if the takeoff speed and the angle are the same? The free-fall acceleration on the moon is one-sixth what it is on Earth.

Answers

The person can jump 6 times higher on the moon compared to Earth.

What is the maximum height jumped by an object?

The maximum height an object can Jump is the height vertical displacement of the object during an upward motion.

Mathematically, the maximum height an object can jump is given as;

H = u²sin²θ/2g

where;

u is the initial velocity of the objectθ is the angle of projection of the objectg is acceleration due to gravityh is the maximum height of jump

When a person moves to the moon, the acceleration due to gravity becomes ; ¹/₆

The new height the object can jump is calculated as follows;

H = u²sin²θ/(2 x ¹/₆g)

H = 6( u²sin²θ/2g)

Thus, the person will jump higher on the moon due to lesser acceleration due to gravity.

Learn more about acceleration due to gravity here: https://brainly.com/question/88039

#SPJ1

the salad is chemichal or physical change

Answers

Answer:Physical

Explanation:

Answer:

physical change

Explanation:

Making a fruit salad, with raw fruits is considered as physical change because in this process chemical composition of fruits is not changed. It is simply changing the shape of the substance.

Other Questions
What compound is formed from Ca2+ and Cl1- Chelsea was reading at steady pace.By the time she stopped reading for the night she had 64 pages in 20 minutes.What is Chelsea's unit rate Does alcohol really burn off when cooking? what are the possible substitutions for alcohol in recipes?. Which group of components is common to the circulatory systems of most living animals?. PLS HELPP TYSM I NEED HELP ASAPPPP The birth weights of the 908 babies born at Valley Hospital in 2019 were normallydistributed with a mean of 7.2 pounds with a standard deviation of 1.5. Use the Z-Score Table from the book to determine the number of babies that weighed morethan 10 pounds.Round your answer to the nearest whole number, but do not include the word"babies" in your response.PLEASE HELP I POSTED THIS QUESTION LIKE TWICE AND NO ONE IS HELPING ME For mn3 , write an equation that shows how the cation acts as an acid. which educational philosophy do you see as the most relevant today?Why? Also, which educational philosophy do you see as the least relevant today? Why? Carly works 6 hours each day for 4 days a weekshe earns 360 each weekHow much does Carly earn each hour an occupational therapist has been hired by a business to offer suggestions as to the design of work stations, equipment and the environment to prevent poor posture, injury, fatigue and eye strain. which frame of reference would most likely inform her work? Someone who did essays beforeCan anyone create a great essay outline for the Silk Road and how it originated Use the power of a power property to select each correct way to rewrite the expression x15 Narrative poems contain the same literary elements as narrative prose, like short stories and novels. True False You can change the calculation used in the values area by right-clicking a value in the values area to open the shortcut menu, and then clicking field settings to open the ____ dialog box. two skaters, each of mass 50 kg, approach each other along parallel paths separated by 3.0 m. they have opposite velocities of 1.4 m/s each. one skater carries one end of a long pole of negligible mass, and the other skater grabs the other end as she passes. the skaters then rotate around the center of the pole. assume that the friction between skates and ice is negligible. what are (a) the radius of the circle, (b) the angular speed of the skaters, and (c) the kinetic energy of the two-skater system? next, the skat Conflicts between two mutually exclusive projects occasionally occur, where the npv method ranks one project higher but the irr method puts the other one first. In theory, such conflicts should be resolved in favor of the project with the higher irr. a leader who is active, searches for opportunities, and experiments and takes risks is exhibiting which leadership practice? write a program that reads weather data from a given csv file and determines the day with the lowest average temperature. 0F; drops 15 new temperature What is the equation of the line in slope-intercept form?Write your answer using integers, proper fractions, and improper fractions in simplest form.