a solution contains 1.17×10-2 m calcium nitrate and 1.45×10-2 m lead acetate. solid ammonium fluoride is added slowly to this mixture. a. what is the formula of the substance that precipitates first?

Answers

Answer 1

To determine the formula of the substance that precipitates first, we need to consider the solubility rules for the given compounds.

Calcium nitrate (Ca(NO3)2) is a soluble compound, meaning it remains dissolved in water. Lead acetate (Pb(C2H3O2)2) is also a soluble compound. Ammonium fluoride (NH4F) is the compound that will potentially form a precipitate when added to the mixture. To determine if it will precipitate, we need to compare the solubility of the potential products of the reaction.Calcium fluoride (CaF2) is insoluble in water and forms a precipitate. Lead fluoride (PbF2) is also insoluble and forms a precipitate.Comparing the solubilities of the potential products, we find that calcium fluoride (CaF2) is less soluble than lead fluoride (PbF2). Therefore, the substance that will precipitate first when solid ammonium fluoride is added to the mixture is calcium fluoride (CaF2).

To learn more about precipitate:

https://brainly.com/question/30904755

#SPJ11


Related Questions

assume c moles of a diatomic gas has an internal kinetic energy of e joules. determine the temperature of the gas after it has reached equilibrium.

Answers

If 3 moles of a diatomic gas has an internal kinetic energy of 10 Kilojoules then the temperature of the gas when it reaches equilibrium is 364.67 Kelvin.

To determine the temperature of a gas, we can use the equation for the average kinetic energy of a molecule:

KE_avg = (3/2) * k * T

Where:

KE_avg is the average kinetic energy of a molecule,

k is the Boltzmann constant (approximately 1.38 x 10^-23 J/K),

T is the temperature in Kelvin.

Given that the gas has 3.0 moles and an internal kinetic energy of 10 kJ, we need to convert the energy to joules and divide by the number of moles to find the average kinetic energy per molecule.

Internal kinetic energy = 10 kJ = 10,000 J

Number of moles (n) = 3.0 mol

Average kinetic energy per molecule (KE_avg) = Internal kinetic energy / Number of molecules

KE_avg = 10,000 J / (3.0 mol * 6.022 x 10^23 molecules/mol)

Now we can rearrange the equation to solve for temperature (T):

T = (KE_avg * 2) / (3 * k)

Plugging in the values:

T = (10,000 J / (3.0 mol * 6.022 x 10^23 molecules/mol)) * 2 / (3 * 1.38 x 10^-23 J/K)

Simplifying:

T ≈ 364.67 K

Therefore, the gas's temperature after reaching equilibrium is approximately 364.67 Kelvin.

The complete question should be:

Assume 3.0 moles of a diatomic gas has an internal kinetic energy of 10 kJ. Determine the temperature of the gas after it has reached equilibrium.

Learn more about Boltzmann constant:

https://brainly.com/question/30639301

#SPJ11

How many atoms of hydrogen must be lined up to make a line 1 inch long. Hydrogen radius is 53 pm. (Convert pm to inches)

Answers

185186 atoms of hydrogen must be lined up to make a line 1 inch long.

The atomic radius of hydrogen is 53 picometers. The conversion of picometers to inches is needed to calculate how many atoms of hydrogen will line up to make a 1 inch long line. Conversion factor: 1 picometer = 3.937 x 10^-11 inch

53 picometers × (1 inch/ 2.54 cm) × (1 cm/ 10 mm) × (1 mm/ 10^6 nm) × (1 nm/ 10^3 Å) × (1 Å/ 10^-10 m) = 2.09 x 10^-9 inch

Substitute the given value of hydrogen atomic radius into the expression below:

1 in ÷ (53 pm) = 185186 atoms

Therefore, 185186 atoms of hydrogen must be lined up to make a line 1 inch long.

learn more about hydrogen here

https://brainly.com/question/24433860

#SPJ11

Draw the product of the hydrogenation of 2‑butyne. Draw all hydrogen atoms. H3C−C≡C−CH3+2H2−→−Pt

Answers

The product of hydrogenation of butyne is H3C-CH=CH-CH3, and the product is butene as the product of the reaction would have a double bond.

Hydrogenation is the process of adding hydrogen to a compound or breaking the molecule's double or triple bond. The reaction between hydrogen gas and unsaturated organic compounds occurs in the presence of catalysts such as platinum, palladium, or nickel, and the reaction is termed hydrogenation. It is an exothermic reaction that typically takes place at high pressure and temperature. To draw the product of the hydrogenation of 2‑butyne, H3C−C≡C−CH3+2H2−→−Pt, and draw all hydrogen atoms, we must first comprehend the molecular structure of 2‑butyne. It is an alkyne with four carbons in its structure. We can represent it in structural form as:H3C−C≡C−CH3We must first identify the carbon atoms involved in the triple bond and add two hydrogen atoms to each of the carbons.

To know more about double bond visit:

https://brainly.com/question/29068102

#SPJ11

The common ion effect can be most effectively used to _________ precipitation of a _________ ionic solid.

Select the correct answer below:

encourage, soluble

discourage, soluble

encourage, slightly soluble

discourage, slightly soluble

Answers

The common ion effect can be most effectively used to discourage precipitation of a soluble ionic solid.

How does the common ion effect impact the precipitation of a slightly soluble ionic solid?

The common ion effect refers to the phenomenon where the presence of an ion already present in a solution reduces the solubility of a compound containing the same ion. It occurs due to the principle of equilibrium in chemical reactions.

In the context of precipitation, when two soluble ionic compounds are mixed, their respective ions dissociate and combine to form an insoluble product, which precipitates out of the solution. However, if one of the ions in the product is already present in high concentration due to the addition of a soluble compound containing that ion, the solubility of the product is reduced.

In this case, the common ion effect can be most effectively used to discourage the precipitation of a slightly soluble ionic solid. By adding a soluble compound containing one of the ions present in the product, the concentration of that ion is increased, shifting the equilibrium towards the dissolved form and reducing the precipitation of the solid.

Therefore, the correct answer is "discourage, slightly soluble" as the common ion effect is used to decrease the solubility and discourage the formation of a slightly soluble ionic solid.

Learn more about  common ion effect

brainly.com/question/30772969

#SPJ11

A lead ball is added to a graduated cylinder containing 31.8 mL of water, causing the level of the water to increase to 93.7 mL. What is the volume in milliliters of the lead ball?
a) 31.8 mL
b) 61.9 mL
c) 93.7 mL
d) 125.5 mL

Answers

Given that a lead ball is added to a graduated cylinder containing 31.8 mL of water, causing the level of the water to increase to 93.7 mL. We need to find the volume in milliliters of the lead ball

. We know that the volume of water displaced by the ball is the same as the volume of the ball. So, to find the volume of the ball, we need to subtract the initial volume of water from the final volume of water

. Hence, the main answer is option b) 61.9 : The volume of the lead ball = Final volume of water - Initial volume of waterVolume of the lead ball = 93.7 mL - 31.8 mL= 61.9 mLTherefore, the volume of the lead ball is 61.9 mL

To know more about water visit:

https://brainly.com/question/28465561

#SPJ11

calculate the number of grams of fe2o3 needed to react with 18.3 g c.

Answers

By using the stoichiometry of the reaction, we can determine the molar ratio between [tex]Fe_2O_3[/tex] and C and convert the given mass of C into moles. Approximately 243.69 grams of [tex]Fe_2O_3[/tex] are needed to react with 18.3 grams of carbon

To solve this problem, we need to know the balanced chemical equation for the reaction between[tex]Fe_2O_3[/tex] and C. Let's assume the equation is:

[tex]Fe_2O_3[/tex] + C → Fe + [tex]CO_2[/tex]

From the equation, we can see that the molar ratio between [tex]Fe_2O_3[/tex] and C is 1:1. This means that one mole of [tex]Fe_2O_3[/tex] reacts with one mole of C.

First, we convert the given mass of C (18.3 g) into moles. To do this, we divide the mass of C by its molar mass. The molar mass of carbon is approximately 12 g/mol, so:

Moles of C = 18.3 g / 12 g/mol = 1.525 mol

Since the molar ratio between [tex]Fe_2O_3[/tex] and C is 1:1, we know that the number of moles of [tex]Fe_2O_3[/tex] required will also be 1.525 mol.

To convert moles of [tex]Fe_2O_3[/tex] into grams, we multiply the moles by its molar mass. The molar mass of [tex]Fe_2O_3[/tex] is approximately 159.7 g/mol. Therefore:

Mass of Fe2O3 = 1.525 mol * 159.7 g/mol ≈ 243.69 g

Therefore, approximately 243.69 grams of [tex]Fe_2O_3[/tex] are needed to react with 18.3 grams of carbon.

Learn more about stoichiometry here:

https://brainly.com/question/28780091

#SPJ11

the spontaneous reaction below occurs in a voltaic cell. which of the following statements about this cell is true? [select all that apply]2 ag (aq) zn(s) → 2 ag(s) zn2 (aq)

Answers

The given spontaneous reaction occurs in a voltaic cell. In a voltaic cell, a spontaneous redox reaction is used to generate an electric current.

Electrons move through the wire from the anode to the cathode, and ions move from the anode to the cathode through the salt bridge. The following statements about the given cell are true:

1. Electrons flow from Zn(s) to Ag+(aq).

2. Zn is the anode and Ag is the cathode.

3. The oxidation of Zn(s) occurs at the anode.

4. The reduction of Ag+(aq) occurs at the cathode.

5. The potential difference across the cell is positive.

The given cell is a galvanic cell because the spontaneous reaction drives the flow of electrons, which allows work to be done. It is an electrochemical cell in which chemical energy is converted to electrical energy. Therefore, options 1, 2, 3, 4, and 5 are correct.

To know more about voltaic cell visit:

https://brainly.com/question/29186551

#SPJ11

b. what is the hybridization of the central atom in scl2? hybridization = what are the approximate bond angles in this substance ? bond angles =

Answers

The central atom in SCl2 undergoes sp3 hybridization. The bond angle between the two chlorine atoms is approximately 103.5 degrees.

This means that the sulfur atom in SCl2 forms four hybrid orbitals by combining one 3s orbital and three 3p orbitals. These hybrid orbitals arrange themselves in a tetrahedral geometry around the central sulfur atom.

The approximate bond angles in SCl2 can be calculated using the VSEPR theory (Valence Shell Electron Pair Repulsion). In this theory, lone pairs and bonding pairs of electrons around the central atom repel each other, causing the molecular geometry to adjust.

In SCl2, there are two bonding pairs and no lone pairs around the central sulfur atom. According to VSEPR theory, the molecule adopts a bent or V-shaped geometry. The bond angle between the two chlorine atoms is approximately 103.5 degrees.

To know more about hybridization, refer to the link:

https://brainly.com/question/14516902#

#SPJ11

what is the product of the following reaction? ch3ch2o - hcl

Answers

The product of the following reaction is CH3CH2Cl. The product of the reaction will be CH3CH2Cl (ethyl chloride) and water (H2O).

An alcohol reacts with hydrochloric acid (HCl) to produce an alkyl halide and water. The reaction is known as the dehydration of alcohols. This reaction proceeds by the elimination of a water molecule from the alcohol. The mechanism of the reaction is an SN1 (substitution nucleophilic unimolecular) reaction.

Here is the mechanism for the reaction between ethanol (CH3CH2OH) and HCl (aq):The reaction between CH3CH2O- and HCl will also follow the same mechanism. The product of the reaction will be CH3CH2Cl (ethyl chloride) and water (H2O).

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

when mendeleev developed his periodic table, he placed the greatest emphasis on?

Answers

When Mendeleev developed his periodic table, he placed the greatest emphasis on organizing the elements based on their chemical properties and atomic weights.

Mendeleev developed the first periodic table of the elements based on the periodicity observed in the chemical properties and atomic weights of the elements. He placed the greatest emphasis on organizing the elements based on their chemical properties and atomic weights.

Mendeleev arranged the elements in horizontal rows called periods and vertical columns called groups. He arranged the elements in the order of increasing atomic weights and grouped them according to their chemical properties.He also left gaps in his table for elements that were yet to be discovered. He made predictions of the properties of the undiscovered elements based on the properties of the elements in the same group or period as the gaps.

To know more about chemical visit:

https://brainly.com/question/29240183

#SPJ11

Ammonium nitrate undergoes thermal decomposition to produce only gases: NH4NO2 (s) ---> N2 (9) + 2H20 (g) What volume (L) of gas is produced by the decomposition of 35.0 g of NH4NO2 (s) at 525 °C and 1.5 atm? 24 160 Ο Ο Ο Ο 72 47 QUESTION 12 The thermal decomposition of potassium chlorate can be used to produce oxygen in the laboratory. 2KCIO3 (s) ---> 2KCI (s) + 302 (9) What volume (L) of O2 gas at 25°C and 1.00 atm pressure is produced by the decomposition of 7.5g of KCIO3 (s)? 0 3.7 2.0 7.5 4.5 QUESTION 13 True or False. Dalton's atomic theory of matter states that the proton uniquely identify the element. True False
Previous question

Answers

Dalton's atomic theory of matter states that the proton uniquely identify the element. The given statement is false. Dalton's atomic theory of matter states that atoms are indivisible and indestructible.

The volume of gas produced by the decomposition of 35.0 g of

NH4NO2 (s) at 525 °C

and 1.5 atm can be calculated as follows:Given that,Mass of

NH4NO2 = 35.0 g

Temperature (T) = 525 °C = (525 + 273.15) K = 798.15 K

Pressure (P) = 1.5 atm Molar mass of

NH4NO2 = 80.04 g/mol

Number of moles of

NH4NO2 = mass / molar mass = 35.0 g / 80.04 g/mol = 0.436 mol

As per the given reaction,1 mole of

NH4NO2 produces 1 mole of N2 and 2 moles of

H2O0.436 mol of NH4NO2

will produce 0.436 mol of N2 and 0.872 mol of H2ONow, we need to use the ideal gas equation

, PV = nRT,

to calculate the volume of H2O produced.

V = nRT / P = (0.872 mol)(0.08206 L atm K⁻¹ mol⁻¹)(798.15 K) / (1.5 atm) ≈ 38.6 L

Therefore, the volume of H2O produced is approximately 38.6 L.What volume (L) of O2 gas at 25°C and 1.00 atm pressure is produced by the decomposition of 7.5g of

KCIO3 (s)?Given that,

Mass of K CIO3 = 7.5 g

Temperature (T) = 25 °C = 25 + 273.15 = 298.15 K

Pressure (P) = 1.00 atm Molar mass of KCIO3 = 122.55 g/mol

Number of moles of

KCIO3 = mass / molar mass = 7.5 g / 122.55 g/mol = 0.0612 mol

As per the given reaction,1 mole of KCIO3 produces 3 moles of

O20.0612 mol of KCIO3 will produce 0.0612 × 3 = 0.1836 mol of O2

Now, we need to use the ideal gas equation, PV = nRT, to calculate the volume of O2 produced.

V = nRT / P = (0.1836 mol)(0.08206 L atm K⁻¹ mol⁻¹)(298.15 K) / (1.00 atm) ≈ 4.5 L

Therefore, the volume of O2 produced is approximately 4.5 L.Dalton's atomic theory of matter states that the proton uniquely identify the element. The given statement is false. Dalton's atomic theory of matter states that atoms are indivisible and indestructible.

To know more about Dalton's atomic theory  visit:

https://brainly.com/question/1403872

#SPJ11

TRUE/FALSE. one gram of iron(ii) chloride has a higher mass percentage of chloride than 1 gram of iron(iii) chloride.

Answers

The statement " one gram of iron(ii) chloride has a higher mass percentage of chloride than 1 gram of iron(iii) chloride." is TRUE.

Iron (II) chloride has a higher mass percentage of chloride than iron (III) chloride. It is because iron (II) chloride has a formula weight of 126.75 g/mol and the molar mass of its chloride ion is 35.45 g/mol. This makes the mass percentage of chloride in one gram of Iron (II) chloride to be;

Mass of chloride in one gram of iron(II) chloride = (2 * 35.45 g/mol)/126.75 g/mol= 0.5564 g chloride in 1 gram of iron (II) chloride.

Mass percentage of chloride in iron (II) chloride = (0.5564 g chloride / 1 g iron(II) chloride) × 100%= 55.64%.

Iron (III) chloride has a formula weight of 162.20 g/mol, and the molar mass of its chloride ion is 35.45 g/mol. This makes the mass percentage of chloride in one gram of Iron (III) chloride to be:

Mass of chloride in one gram of iron(III) chloride = (3 * 35.45 g/mol) /162.20 g/mol= 0.6496 g chloride in 1 gram of iron (III) chloride. Mass percentage of chloride in iron (III) chloride = (0.6496 g chloride / 1 g iron(III) chloride) × 100%= 64.96%.

Thus, it can be concluded that one gram of Iron (II) chloride has a higher mass percentage of chloride than one gram of Iron (III) chloride, so the statement is TRUE.

To know more about mass percentage refer here :

https://brainly.com/question/29183380

#SPJ11

False. One gram of iron(II) chloride [tex](FeCl2[/tex]) does not necessarily have a higher mass percentage of chloride than one gram of iron(III) chloride ([tex]FeCl3[/tex]).

The mass percentage of an element in a compound is calculated by dividing the mass of the element by the total mass of the compound and multiplying by 100.

In [tex]FeCl2[/tex], the molar mass of iron is 55.85 g/mol, and the molar mass of chlorine is 35.45 g/mol. Therefore, the total mass of[tex]FeCl2[/tex] is approximately 126.75 g/mol.

In FeCl3, the molar mass of iron is still 55.85 g/mol, but there are three chlorine atoms present, so the molar mass of chlorine is 3 * 35.45 g/mol = 106.35 g/mol. Thus, the total mass of FeCl3 is approximately 162.2 g/mol.

Comparing the mass percentages of chloride, we find that [tex]FeCl3[/tex]has a higher mass percentage of chloride because the molar mass of chloride is a larger fraction of the total mass of the compound.

Therefore, one gram of[tex]FeCl3[/tex] has a higher mass percentage of chloride than one gram of [tex]FeCl2[/tex].

To know more about chloride refer here:

https://brainly.com/question/32108518#

#SPJ11

Determine whether the solutions formed by each salt will be acidic, basic, or neutral with Explanations!: NaHCO3, CH3CH2NH3Cl, KNO3, Fe(NO3)3

Answers

The solutions formed by NaHCO₃, CH₃CH₂NH₃Cl, KNO₃, and Fe(NO₃)₃ salts can be classified as follows: NaHCO₃ will be weakly basic, CH₃CH₂NH₃Cl will be acidic, KNO₃ will be neutral, and Fe(NO₃)₃ will be acidic.

1. NaHCO₃: Sodium bicarbonate, NaHCO₃, is a weak base. When dissolved in water, it forms Na⁺ ions and HCO₃⁻ ions. The presence of HCO₃⁻ ions, which can accept protons, makes the solution weakly basic.

2. CH₃CH₂NH₃Cl: This compound is ethylammonium chloride, which is a salt of a weak base (ethylamine, CH₃CH₂NH₂) and a strong acid (HCl). Ethylamine is a weak base, and when it forms a salt with a strong acid, the resulting solution will be acidic. The chloride ion does not significantly affect the pH.

3. KNO₃: Potassium nitrate, KNO₃, is a salt of a strong base (KOH) and a strong acid (HNO₃). Since both the cation (K⁺) and anion (NO₃⁻) do not affect the pH when dissolved in water, the solution will be neutral.

4. Fe(NO₃)₃: Iron(III) nitrate, Fe(NO₃)₃, is a salt of a strong acid (HNO₃) and a weak base (Fe(OH)₃). The presence of the Fe³⁺ cation can hydrolyze water molecules, releasing H⁺ ions and making the solution acidic.

In summary, NaHCO₃ will be weakly basic, CH₃CH₂NH₃Cl will be acidic, KNO₃ will be neutral, and Fe(NO₃)₃ will be acidic when dissolved in water.

To learn more about acidic refer:

https://brainly.com/question/24255408

#SPJ11

E5: Please show complete solution and explanation. Thank
you!
Determine AS when 2 moles of SO₂(g) undergo a change of state from 25°C and 1 atm to 325°C and 20 atm pressure. Cp = 6.077 +23.54x10-³T-9.69x10-6T2 cal deg-¹mol-¹.

Answers

The entropy change when 2 moles of SO₂(g) undergo a change of state from 25°C and 1 atm to 325°C and 20 atm pressure is 14.43 cal/K.

The entropy change can be calculated using the following equation:

[tex]\begin{equation}\Delta S = nCp \ln\left(\frac{T_2}{T_1}\right) + R \ln\left(\frac{P_2}{P_1}\right)[/tex]

where:

ΔS is the entropy change (in cal/K)

n is the number of moles (2 moles)

Cp is the heat capacity at constant pressure (6.077 + 23.54x10-³T-9.69x10-6T₂ cal/mol/K)

T₁ is the initial temperature (25°C = 298 K)

T₂ is the final temperature (325°C = 603 K)

R is the gas constant (1.987 cal/mol/K)

P₁ is the initial pressure (1 atm)

P₂ is the final pressure (20 atm)

Plugging in the values, we get:

[tex]\begin{equation}\Delta S = (2 \text{ mol})(6.077 + 23.54 \times 10^{-3} T - 9.69 \times 10^{-6} T^2 \text{ cal/mol/K}) \ln\left(\frac{603}{298 \text{ K}}\right) + (1.987 \text{ cal/mol/K}) \ln\left(\frac{20 \text{ atm}}{1 \text{ atm}}\right)[/tex]

ΔS = 14.43 cal/K

Therefore, the entropy change when 2 moles of SO₂(g) undergo a change of state from 25°C and 1 atm to 325°C and 20 atm pressure is 14.43 cal/K.

To know more about the entropy change refer here :

https://brainly.com/question/28244712#

#SPJ11

what is the product of 5-nitro-2-furaldehyde and aminoguanidine bicarbonate

Answers

5-nitro-2-furanylguanidine is the product of 5-nitro-2-furaldehyde and aminoguanidine bicarbonate.

A substance known as 5-nitro-2-furanylguanidine can be created via the reaction of 5-nitro-2-furdehyde with aminoguanidine bicarbonate. The formation of a new carbon-nitrogen bond occurs as a result of the condensation of the amino group of aminoguanidine bicarbonate with the aldehyde group of 5-nitro-2-furaldehyde.

The following is a representation of the reaction's chemical equation:

5-nitro-2-furanylguanidine + carbon dioxide + water = 5-nitro-2-furdehyde + aminoguanidine bicarbonate

It's crucial to remember that the circumstances of the reaction and the particular reaction mechanism may have an impact on the results, and extra byproducts or variants of the product may appear. Therefore, in order to obtain precise information about the reaction and product generation, it is usually advisable to consult specialised experimental protocols or literature sources.

To learn more about condensation, visit:

https://brainly.com/question/4043946

#SPJ11

how many microliters of 1.000 mnaoh solution must be added to 25.00 ml of a 0.1000 m solution of lactic acid ( ch3ch(oh)cooh or hc3h5o3 ) to produce a buffer with ph = 3.75?

Answers

First, we need to calculate equation  the concentration of CH3CH(OH)COO- and HCH3CH(OH)COOH needed to produce a buffer solution at a given pH.

We will use the Henderson-Hasselbalch equation for this purpose. Henderson -Hasselbalch are equatio pH = pKa + log [CH3CH(OH)COO-] / [HCH3CH(OH)COOH]pH = 3.75 (given)pKa for lactic acid (HC3H5O3) =

We can assume that the volume of the resulting buffer solution is 25.00 ml (the same as the original volume of lactic acid), so we will add only a tiny amount of NaOH to it. The concentration of NaOH is given as 1.000 M.

To know more about equation Visit;

https://brainly.com/question/27984374

#SPJ11

draw the organic product(s) of the following reaction. lithium diisopropylamide

Answers

The organic product of the reaction of lithium diisopropylamide is an anionic carbon species, which is a strong base. It can be used for deprotonation of a wide range of compounds.

Lithium diisopropylamide, commonly known as LDA, is a strong base used in organic synthesis. The main use of LDA is to deprotonate a wide range of organic compounds. When a compound containing an acidic hydrogen atom reacts with LDA, it undergoes deprotonation to give an anion.

Lithium diisopropylamide (LDA) is a strong base often used in organic chemistry to deprotonate a variety of organic compounds. In the presence of LDA, an anionic carbon species is produced by the removal of a proton (H+) from the acidic hydrogen of the starting compound.
To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

Propose the shortest synthetic route for the following transformation (5-dodecanone will also be produced in your synthetic route). Draw the steps of the transformation w W 1 = HBO 2 = HBr, HOOH w 3 = Br2 4 = H2SO4 5 = H2SO4, H20, HgSO4 6 = CH3CH2CH2CH2CH2CI 7 = CH3CH2CH2CH2CH2CH2CI 8 = CH3CH2CH2CH2CH2CH2CH2CI 9 = XS NaNH2/NH3 10 = H/Pt 11 = H/Wilkinson's Catalyst 12 = H Lindlar's Catalyst 13 = Na/NH3 14 = 1) O3 2) H20 15 = 1) O32) DMS

Answers

The reaction involves a series of reactions that produce 5-dodecanone. The following is the synthetic pathway, which includes all reactions and mechanisms.

The synthetic route for the given transformation is shown below:

The starting compound is the phenylpropionic acid, and the reaction begins with the formation of the alkene through HBO and HBr in the presence of HOOH. The alkene produced can undergo bromination to give the corresponding alkyl bromide using Br2. The intermediate formed by the reaction then reacts with H2SO4 to form an alkyl oxide ion which is then subjected to hydrolysis using H2SO4 and HgSO4 to form the corresponding alcohol. The alcohol is then subjected to a series of reactions to form the final product.The alcohol is first reacted with CH3CH2CH2CH2CH2CI to form a new alkyl iodide. The alkyl iodide is then reacted with CH3CH2CH2CH2CH2CH2CI to form another alkyl iodide. The process is repeated with CH3CH2CH2CH2CH2CH2CH2CI.

The alkyl iodide produced is then treated with NaNH2/NH3 to form the corresponding alkyne. The alkyne is then hydrogenated using H/Pt to form the corresponding alkene. The alkene is then subjected to hydrogenation again, this time using Wilkinson's Catalyst, to form the corresponding alkane. The alkane is then reacted with Lindlar's Catalyst to form the corresponding alkene. The alkene is then reacted with Na/NH3 to form the corresponding alkyne. Finally, the alkyne is subjected to ozonolysis using O3 and then subjected to reduction using DMS (dimethyl sulfide) to form the final product. The final product is 5-dodecanone, which is produced through the reactions outlined above.

To know more about synthetic pathway visit:

https://brainly.com/question/31622886

#SPJ11

what evidence suggests the acylation of aniline was successful?

Answers

The successful acylation of aniline can be confirmed by several key pieces of evidence, including the formation of a colored product, the disappearance of the characteristic amine smell, and the presence of specific spectroscopic signals.

When aniline undergoes acylation, it reacts with an acylating agent, such as acetyl chloride or acetic anhydride, to form a new compound. One of the primary indicators of a successful acylation reaction is the formation of a colored product. Aniline itself is colorless, but upon acylation, the resulting product often exhibits a distinct color. This color change can be observed visually and provides initial evidence of a successful reaction.

Additionally, the characteristic amine smell of aniline, which is often described as fishy or pungent, diminishes or disappears altogether after acylation. This olfactory change further supports the notion that the acylation reaction has taken place.

Furthermore, spectroscopic techniques can be employed to analyze the reaction mixture and provide more definitive evidence. Techniques like infrared spectroscopy (IR) and nuclear magnetic resonance (NMR) spectroscopy can reveal specific signals that correspond to the presence of the acylated product. These signals, such as shifts in absorption or chemical shifts, can be compared to known reference spectra to confirm the successful acylation of aniline.

Learn more about nuclear magnetic resonance here:

https://brainly.com/question/31968318

#SPJ11

Enter an equation showing how BaSO4 dissolves in water. express your answer as a chemical equation. identify all of the phases in your answer.
BaSO4 (s) ↔Ba2+ (aq) + SO42 (aq)

Answers

The equation BaSO4 (s) ↔ Ba2+ (aq) + SO42- (aq) represents the dissolution of solid BaSO4 in water, with Ba2+ and SO42- ions being formed in the aqueous phase.

The equation showing the dissolution of BaSO4 (barium sulfate) in water is:

BaSO4 (s) ↔ Ba2+ (aq) + SO42- (aq)

In this equation, BaSO4 is in the solid phase (s), while Ba2+ and SO42- ions are in the aqueous phase (aq). The double-headed arrow (↔) represents the reversible reaction, indicating that BaSO4 can dissolve in water to form Ba2+ and SO42- ions, and these ions can also combine to form solid BaSO4 under certain conditions.

Barium sulfate (BaSO4) is sparingly soluble in water. When it comes into contact with water, it dissociates into its constituent ions, barium (Ba2+) and sulfate (SO42-). The dissolution process is reversible, meaning that Ba2+ and SO42- ions can also recombine to form solid BaSO4 when the concentration of these ions exceeds the solubility product.

The equation BaSO4 (s) ↔ Ba2+ (aq) + SO42- (aq) represents the dissolution of solid BaSO4 in water, with Ba2+ and SO42- ions being formed in the aqueous phase.

To know more about dissolution visit:

https://brainly.com/question/6319922

#SPJ11

Which of the following would be expected to form hydrogen bonds with water? Choose all that apply propyl alcoholHc0 но methyl acetate H propaneCm нно N-methylpropanamide H None of the Above

Answers

Hydrogen bonding is a kind of dipole-dipole interaction that happens between molecules that contain hydrogen atoms that are connected to extremely electronegative atoms such as oxygen (O), nitrogen (N), or fluorine (F).

Hence, the molecules that have either oxygen, nitrogen, or fluorine atoms which are capable of forming hydrogen bonds with water are expected to form hydrogen bonds with water.Out of the given options, Propyl alcohol, N-methylpropanamide, and ethanol would be expected to form hydrogen bonds with water. Therefore, the answer is "long answer"Option A: Propyl alcohol (CH3CH2CH2OH)It contains the –OH group which can participate in hydrogen bonding with water. Propyl alcohol can form hydrogen bonds with water.

Hc0 но (Methyl acetate)Methyl acetate (CH3COOCH3) is an ester. It does not have an -OH group that can participate in hydrogen bonding. So, option B is incorrect.Option C: PropaneCm нно (2-Methylpropanol)2-Methylpropanol has an -OH group but it does not have an oxygen atom. Therefore, it can’t participate in hydrogen bonding with water. So, option C is incorrect.Option D: N-methylpropanamide (CH3CH2CH2CONHCH3)It has a carbonyl group that contains an oxygen atom, so N-methylpropanamide can form hydrogen bonds with water. Thus, option D is correct.Option E: HNone of the AboveHence, the option None of the Above is incorrect since Propyl alcohol and N-methylpropanamide can form hydrogen bonds with water. Thus, the correct answer is "long answer" i.e options A and D.

To know more about Hydrogen bonding visit:

https://brainly.com/question/31139478

#SPJ11

Match the state of oxidation for ubiquinone (Q) and cytochromes , e., and as with cach mitochondrial condition Abundant NADH and Oy, but cyanide added Abundant NADH, buto, exhausted Abundant o, but NADH exhausted Abundant NADH and o,

Answers

The state of oxidation for ubiquinone (Q) and cytochromes can be matched with mitochondrial react conditions. Ubiquinone (Q) is a mobile electron carrier found in the inner membrane of mitochondria.

Abundant NADH and O2, but cyanide added: Ubiquinone (Q) is in the reduced state (QH2) and cytochromes are also in the reduced state (Fe2+).Abundant NADH, but O2 exhausted: Ubiquinone (Q) is in the reduced state (QH2) and cytochromes are in the oxidized state (Fe3+).Abundant O2, but NADH exhausted: Ubiquinone (Q) is in the oxidized state (Q) and cytochromes are also in the oxidized state (Fe3+).Abundant NADH and O2: Ubiquinone (Q) is in the reduced state (QH2) and cytochromes are in the oxidized state (Fe3+).

It is a lipid-soluble compound that accepts electrons from NADH and FADH2, and transfers them to cytochromes. The state of oxidation of ubiquinone (Q) can be either reduced (QH2) or oxidized (Q).Cytochromes are proteins that contain iron in a heme group. They are embedded in the inner membrane of mitochondria and act as electron carriers between ubiquinone and oxygen.

To know more about react visit:

https://brainly.com/question/14168723

#SPJ11

Balance the following redox reaction in an acidic solution
Cl-(aq)+MnO2(s)=Cl2(g)+Mn2+(aq)

Answers

The balanced redox reaction is  Cl⁻ (aq) + 2MnO₂ (s) + 8H⁺(aq) → Cl₂ (g) + 2Mn²⁺ (aq) + 4H₂O(l).

The redox reaction can be balanced using the half-reaction method. Here are the steps to follow:

Separate the overall reaction into two half-reactions: oxidation and reduction. Cl⁻ (aq) → Cl₂ (g) oxidation

MnO₂ (s) → Mn²⁺ (aq) reduction

Balance the atoms that are undergoing a change in oxidation state. We can see that chlorine is going from -1 in the reactant to 0 in the product. Add one electron to the left side.

Cl⁻ (aq) → Cl₂ (g) + 2e⁻ oxidation

MnO₂ (s) → Mn²⁺ (aq) reduction

Balance the atoms that are not undergoing a change in oxidation state. There is only one manganese atom on both sides of the equation and they are already balanced.

Cl⁻ (aq) → Cl₂ (g) + 2e⁻ oxidation

MnO₂ (s) + 4H⁺(aq) + 2e⁻ → Mn²⁺ (aq) + 2H₂O(l) reduction

Multiply each half-reaction by a factor that makes the number of electrons equal in both half-reactions. by multiplying the first half-reaction by 2.

Cl⁻ (aq) + 2e⁻ → Cl₂ (g) oxidation2MnO₂ (s) + 8H⁺(aq) + 4e⁻ → 2Mn²⁺ (aq) + 4H₂O(l) reduction

Add the two half-reactions together and cancel out anything that is on both sides. This leaves us with the balanced redox reaction.

Therefore, Cl⁻ (aq) + 2MnO₂ (s) + 8H⁺(aq) → Cl₂ (g) + 2Mn²⁺ (aq) + 4H₂O(l) is The balanced redox reaction.

To know more about redox reaction refer here :

https://brainly.com/question/21851295

#SPJ11

At a given temperature, the equilibrium constant Kc for the reaction 2NO(g)+2H2(g)<==>N2(g)+2H2O(g) is .11.
What is the equilibrium constant for the following reaction? NO(g)+H2(g)<==> 1/2N2(g)+H20(g)

Answers

The equilibrium constant for the reaction `NO(g) + H2(g) ⇌ 1/2N2(g) + H2O(g)` is 0.055.

The equilibrium constant Kc for the reaction `2NO(g) + 2H2(g) ⇌ N2(g) + 2H2O(g)` is 0.11.

The given reactions are `2NO(g) + 2H2(g) ⇌ N2(g) + 2H2O(g)` and `NO(g) + H2(g) ⇌ 1/2N2(g) + H2O(g)`.

When we compare both equations, the second equation has half the coefficients of the products, so we divide the Kc of the first equation by 2 to get the equilibrium constant for the second equation.

Kc for the second equation:`NO(g) + H2(g) ⇌ 1/2N2(g) + H2O(g)`= 0.11/2= 0.055

Therefore, the equilibrium constant for the reaction `NO(g) + H2(g) ⇌ 1/2N2(g) + H2O(g)` is 0.055.

To learn more about equilibrium constant :

https://brainly.com/question/3159758

#SPJ11

1. A local FM radio station broadcasts at an energy of 6.53×10-29 kJ/photon.


Calculate the frequency at which it is broadcasting.
Frequency = _______ MHz

(1 MHz = 106 sec -1)

----------------------------------------------

2. A local FM radio station broadcasts at a frequency of 92.1 MHz.

Calculate the energy of the frequency at which it is broadcasting.
Energy = ______ kJ/photon

(1 MHz = 106 sec -1)

Answers

The energy of a single photon of an electromagnetic wave can be related to its frequency using the equation: E = hf, where E is the energy of a single photon, h is Planck's constant, and f is the frequency of the wave.

1. The energy of a single photon of an electromagnetic wave can be related to its frequency using the equation: E = hf, where E is the energy of a single photon, h is Planck's constant, and f is the frequency of the wave. Using this equation, we can calculate the frequency of the FM radio station given its energy. We are given the energy of the photon as 6.53 x 10^-29 kJ/photon.

Since 1 MHz = 10^6 sec^-1, we can convert the frequency to sec^-1 by multiplying by 10^6. Therefore, the frequency is:f = E/h = (6.53 x 10^-29 kJ/photon)/(6.626 x 10^-34 J s) = 9.83 x 10^4 sec^-1 = 98.3 kHz. (Note that we convert the energy to joules since Planck's constant is in joule seconds.) Therefore, the frequency at which the radio station is broadcasting is 98.3 kHz.

2. Using the same equation E = hf, we can calculate the energy of a single photon given its frequency. We are given the frequency of the FM radio station as 92.1 MHz. To convert to sec^-1, we need to multiply by 10^6 since 1 MHz = 10^6 sec^-1. Therefore, the frequency is:f = 92.1 x 10^6 sec^-1. Plugging this into the equation, we have:E = hf = (6.626 x 10^-34 J s)(92.1 x 10^6 sec^-1) = 6.10 x 10^-26 J/photon. (Note that we convert the frequency to Hz since Planck's constant is in joule seconds.) To convert this energy to kJ/photon, we divide by 1000. Therefore, the energy of the frequency at which the radio station is broadcasting is 6.10 x 10^-29 kJ/photon.

To know more about electromagnetic wave visit: https://brainly.com/question/29774932

#SPJ11

draw the organic product(s) of the following reactions, and include carbon dioxide if it is produced.

Answers

Carbon dioxide is produced along with the organic products. In reaction 4, four molecules of carbon dioxide are produced, but no organic product is formed.

Sure, I'd be happy to help you out! Here are the organic products of the following reactions, including carbon dioxide if it is produced:1. Reaction:

CH3COOH + Na2CO3 → Product:CH3COO-Na+ + CO2 + H2O2.

Reaction:

C6H5COOH + CaCO3 → Product:C6H5COO-Ca2+ + CO2 + H2O3.

Reaction:

C2H5OH + O2 → Product:CO2 + H2O (no organic product produced in this reaction)4.

Reaction:

2C2H5OH + 2K2Cr2O7 + 8H2SO4 → Product:4CO2 + 2Cr2(SO4)3 + 4KHSO4 + 2H2O

As you can see, in reactions 1-3, carbon dioxide is produced along with the organic products. In reaction 4, four molecules of carbon dioxide are produced, but no organic product is formed.

To know more about organic products visit:

https://brainly.com/question/30328741

#SPJ11

a solution has a ph of 5.4. write the formula you will use to calculate the [h ] and then show all your work leading to the determination of [h ].

Answers

a. The formula to calculate the [H⁺] of a solution has a ph of 5.4 is [H⁺] = [tex]10^{-pH}[/tex]

b. The determination of the [H⁺] is 2.51 × 10⁻⁶ mol/L.

a. The pH is defined as the negative logarithm of the hydrogen ion concentration (H⁺). Thus, the formula that can be used to calculate [H⁺] is [H⁺] = [tex]10^{-pH}[/tex].

b. To determine the [H⁺], we must apply the formula to calculate the [H⁺] of the given solution with a pH of 5.4.

[H₊] = [tex]10^{-pH}[/tex]

= [tex]10^{-5.4}[/tex]

= 2.51 × 10⁻⁶ mol/L

Therefore, the [H+] of the given solution with a pH of 5.4 is 2.51 × 10⁻⁶ mol/L.

Learn more about determination of the [H⁺]: https://brainly.com/question/30379344

#SPJ11

The [H+] of a solution with a pH of 5.4 is 2.5 × 10-6 M.

The pH scale is a measure of the acidity or basicity of a solution.

The pH of a solution can be used to calculate the hydrogen ion concentration, [H+], using the formula

pH = -log[H+].

To determine the [H+] of a solution with a pH of 5.4, the formula will be:

Hence, the formula for calculating the [H+] of a solution with a pH of 5.4 is

[H+] = 2.5 × 10-6 M.

To determine the [H+] of a solution with a pH of 5.4:

Step 1: Write the formula

pH = -log[H+]

Step 2: Rearrange the formula to isolate [H+]:

[H+] = 10-pH

Step 3: Plug in the given pH value:

pH = 5.4[H+]

= 10-5.4

Step 4: Solve for [H+] using a calculator:

[H+] = 2.5 × 10-6 M

Therefore, the [H+] of a solution with a pH of 5.4 is 2.5 × 10-6 M.

To know more about pH visit:

https://brainly.com/question/2288405

#SPJ11

C6H5COOH(s) -- C6H5COO-(aq) + H+(aq)
Ka = 6.46 x 10e-5
Benzoic acid, C6H5COOH, dissociates in water as shown in the equation above. A 25.0 mL sample of an aqueous solution of pure benzoic acid is titrated using standardized 0.150 M NaOH.
After addition of 15.0 mL of the 0.150 M NaOH, the pH of the resulting solution is 4.37. Calculate the following:
The number of moles of NaOH added.
Please show steps.
Thank you in advance!

Answers

The number of moles of NaOH added is 0.00225 mol.

To calculate the number of moles of NaOH added, we can use the stoichiometry of the reaction between benzoic acid (C6H5COOH) and NaOH. According to the balanced equation, 1 mole of benzoic acid reacts with 1 mole of NaOH. Given that the concentration of NaOH is 0.150 M and 15.0 mL of NaOH solution is added, we can first convert the volume to liters by dividing it by 1000:
Volume of NaOH = 15.0 mL / 1000 mL/L = 0.015 L
Next, we can calculate the number of moles of NaOH using the formula:
moles of NaOH = concentration × volume
moles of NaOH = 0.150 M × 0.015 L = 0.00225 mol
Therefore, the number of moles of NaOH added is 0.00225 mol.

To know more about C6H5COOH, click here https://brainly.com/question/29206874

#SPJ11

Answer the following Critical Thinking Question. Explain your
answers.You may respond to the answers of the other students after
you have answered the question.
A schematic of the energy levels of a h

Answers

The transition that represents the smallest energy change would be from energy level 4 to energy level 3. This is because the energy levels are closer together as you move from higher to lower energies.

Based on the energy levels shown, a transition from energy level 2 to energy level 1 is not possible. This violates the principle that an electron cannot occupy energy levels lower than its ground state.

The transition from energy level 5 to energy level 2 represents the reddest wavelength. This is because the energy difference between these levels corresponds to a lower energy photon with a longer wavelength, which is perceived as red.

The transition from energy level 3 to energy level 1 represents the bluest wavelength. This is because the energy difference between these levels corresponds to a higher energy photon with a shorter wavelength, which is perceived as blue.

The transition from energy level 5 to energy level 1 results in a photon with the same energy as that absorbed originally. This corresponds to the electron returning to its original energy level, releasing a photon with the same energy as the absorbed photon.

Learn more about energy levels, here:

https://brainly.com/question/30546209

#SPJ4

Your question is incomplete, but most probably your full questions was,

Answer the following Critical Thinking Question. Explain your answers.You may respond to the answers of the other students after you have answered the question.

A schematic of the energy levels of a hypothetical atom is shown below. An electron has been excited from energy level 1 to energy level 5 by absorbing a photon.

Which transition to lower energies represents the smallest energy change? _____Which transition, as shown, is not possible? _____Which of the transitions resulting in an emission line represents the reddest wavelength? _____Which of the transitions resulting in an emission line represents the bluest wavelength? _____Which of the transitions resulting in an emission line results in a photon with the same energy as that absorbed originally? _____

balance the redox reaction by inserting the appropriate reaction:h^{ } cro_{4}^{2-} no_{2}^{-} -> cr^{3 } h_{2}o no_{3}^{-}h cro2−4 no−2⟶cr3 h2o no−3

Answers

The balanced redox reaction is : 2H^+ + CrO4^2- + 3NO2^- → Cr^3+ + H2O + 3NO3^-

To balance a redox reaction, we ensure that the number of atoms and charges on both sides of the equation are equal. A step by step of balancing this is as follows :

1. Separating the reaction into two half-reactions, one for oxidation and one for reduction:

Oxidation half-reaction: CrO4^2- → Cr^3+

Reduction half-reaction: 3NO2^- → 3NO3^-

2. Balancing the atoms in each half-reaction by adding water (H2O) molecules:

Oxidation half-reaction: CrO4^2- → Cr^3+ + 4H2O

Reduction half-reaction: 3NO2^- + H2O → 3NO3^- + 2H^+

3. Balancing the hydrogen (H) atoms by adding hydrogen ions (H^+):

Oxidation half-reaction: CrO4^2- + 8H^+ → Cr^3+ + 4H2O

Reduction half-reaction: 3NO2^- + H2O → 3NO3^- + 2H^+

4. Balancing the charges by adding electrons (e^-):

Oxidation half-reaction: CrO4^2- + 8H^+ + 3e^- → Cr^3+ + 4H2O

Reduction half-reaction: 3NO2^- + H2O → 3NO3^- + 2H^+ + 2e^-

5. Multiplying each half-reaction by the appropriate coefficient to equalize the number of electrons transferred:

Oxidation half-reaction: 3CrO4^2- + 24H^+ + 9e^- → 3Cr^3+ + 12H2O

Reduction half-reaction: 6NO2^- + 3H2O → 6NO3^- + 4H^+ + 4e^-

6. Combining the balanced half-reactions and cancel out the electrons:

3CrO4^2- + 24H^+ + 9e^- + 6NO2^- + 3H2O → 3Cr^3+ + 12H2O + 6NO3^- + 4H^+ + 4e^-

Simplifying the equation:

2H^+ + CrO4^2- + 3NO2^- → Cr^3+ + H2O + 3NO3^-

To know more about redox reactions, refer to the link:

https://brainly.com/question/13293425#

#SPJ11

Other Questions
Explain in words and demonstrate graphically the effects of a negative supply shock in both the short-run and long-run. To upload your figure, click on the CIRCLE with a plus sign in the middle, select ADD LOCAL FILE, and then add the photo or PDF of your figure. If you are unable to upload your graph, Remember to both explain what happens and show it in the graph Consider the following open economy (Home economy).The real exchange rate is fixed and equal to one.Saving, investment, government spending, taxes, imports and exports are given by:S = 80 + 0.18YI = IG = GT = T0 + t1YQ = q1YX = x1Ywhere T0 is the level of autonomous taxes, q1 and x1 are , respectively the marginal propensity to import, and export reaction to the foreign countrys income. An asterisk is used to designate variables related to the foreign economy.1. Assuming that t1 = 0.1, and T0 = 100, find the values for the values of c0 and c1. (I cannot for the life of me figure out how to get the integer values for both C0 and C1 please assist) forecast bellamys external financing needed (efn) in 2020 using the percentage-of-sales method. Question 10 0/ 1 point Given the information above for Texas Co., how much overhead was applied? a) $768,000 b) $733,000 c) $727,500 d) $722,650 e) $749,810 Question 10 0/ 1 point Given the information above for Texas Co., how much overhead was applied? a) $768,000 b) $733,000 c) $727,500 d) $722,650 e) $749,810 Section 2 Texas Co. expected its annual overhead costs to be $750,000 and machine hours to equal 100,000 hours. Actual overhead was $745,000, and actual machine hours totalled 97,000 hours. Question 9 0 / 1 point Given the information above for Texas Co., how much is the company's predetermined overhead rate to the nearest cent, assuming overhead is applied based on machine hours? choose the correct nuclear symbol and hyphen notation for the isotope which has a mass number of 28 and atomic number of 14. Consider the following: n + 235 U 88 K r + 144 B a + 4 n (a) Calculate the energy (in MeV) released in the neutron-induced fission reaction above, given m( 88 K r ) = 87.914447 u and m( 144 B a ) = 143.922941 u. (Assume 1 u = 931.5 MeV/ c 2 .) (b) Confirm that the total number of nucleons and total charge are conserved in this reaction. Lance-Hefner Specialty Shoppes decided to use the dollar-value LIFO retail method to value its inventory. Accounting records provide the following information Cost Retail Merchandise inventory, January 1, 2018 Net purchases Net markups Net markdowns Net sales $292,000 $400,000 492,800 635,000 20,000 15,000 500,000 Related retail price indexes are as follows January 1, 2018 December 31, 2018 1.00 1.20 Required: Determine ending inventory and cost of goods sold Ending inventory at retail Ending inventory at cost Cost of aoods sold Los encargados de un parque plantean hacer unainversin extraordinaria para eliminar los desechosarrojados por los visitantes. El costo de esta labor,expresado en millones de pesos, con p la cantidadde residuos eliminados, es:Clp) = _ 16p110-pa. Decide si esta funcin es creciente o decreciente. b. Calcula cunto costara no eliminar ningnresiduo, eliminar solo el 50% de los residuos yeliminarlos todos. c. Para qu puntos del dominio de C interesa enla prctica estudiar esta funcin? Qu valorestoma C en esa parte de su dominio?d. Dibuja la grfica de la funcin C. e. Determina si la funcin tiene mximos o mnimos. f. Qu valor no puede tomar p? Explica tu respuesta. g. Determina si la funcin tiene asntotas e inter-preta su significado en el contexto. A 10-year, 6% coupon bond gives out semi-annual coupon payments. If it's currently selling for 85% of its face value, what is the yield to maturity? Compute your rate of return if you sell the bond next year for 88% of its face value. What forces in the industry environment might affect Tata Starbucks choice of strategy? And what does an internal analysis tell us about this? What intellectual assets are most important to Tata Starbucks? The materials price variance is calculated by multiplying thedifference between actual unit price and standard unit price by thestandard units purchased.True or False Which of the following is not an advantage of businessintelligence:Select one:A. allows for easy analyticsB. streamlines business processesC. boost productivityD. cost why does oxgen have a lower first ionization energy than both nitrogen and fluorine question-Which answer arranges the characteristics of plants in the order in which they evolved, from most ancient to most recent?Option1-sporophyte dominance, gametophyte dependence --> sporophyte dominance, gametophyte independence--> gametophyte dominance, sporophyte dependenceOption2- gametophyte dominance, sporophyte dependence --> sporophyte dominance, gametophyte dependence -->sporophyte dominance, gametophyte independenceOption3- gametophyte dominance, sporophyte dependence --> sporophyte dominance, gametophyte independence.->sporophyte dominance, gametophyte dependenceoption4- sporophyte dominance, gametophyte independence --> sporophyte dominance, gametophyte dependence.-> gametophyte dominance, sporophyte dependence The Civil Rights Act expanded the role of women in government. States rights to control voting processes. Segregation in public facilities. The federal governments power.a. Expanded the role of women in governmentb. States rights to control voting processesc. Segregation in public facilitiesd. The federal governments power Heidi is aggressive and extroverted."" This statement describes Heidi in terms of A. traits. B. types.C. motives. Determine the bond order from the molecular electron configurations. 1. (1)2(1*)2(2)2(2*)2(2p)4and 2. (1)2(1*)2(2)2 My son, daughter and dog recently discovered that Mississippi is in the Top 10 for average number of tornadoes annually. Due to the dog's concern over tornadoes blowing away all her treats, they decide to create a model to predict tornadoes. What sort of resolution would be considered "high" resolution in this case?A. 950 metersB. 250 kilometersC. 250 metersD. 5 kilometers Assume you have been recently hired by the Department ofTransportation (DoT) to analyze motorized vehicle traffic flows.Your initial goal is to analyze the traffic and traffic delays in alarge metr The following table provides a probability distribution for therandom variable y.y f(y)2 0.204 0.407 0.108 0.30(a) Compute E(y). E(y) =(b) Compute Var(y) and . (Round your answer for