DMSO and deuterated chloroform are the most widely solvents used in NMR spectroscopy.
DMSO is the most widely used organic solvent in the NMR analysis due to its wide range of solvent constraints as well as its simple spectrum and having high boiling point. The reaction of the organic compounds with heavy water in the presence of a suitable catalyst which is used to produce deuterium solvents.
Deuterated chloroform, also called as chloroform-d, is the organic compound having formula C₂HCl₃ or CDCl₃. Deuterated chloroform is commercially available. It is easily produced and less expensive than to the deuterated dichloromethane. It is produced by the reaction of hexachloroacetone with deuterium oxide, using pyridine as a catalyst.
To know more about NMR here
https://brainly.com/question/20111886
#SPJ4
why is silicon nitride a covalent bond
The nitrogen atom is comparatively more electronegative than the silicon atoms and silicon nitride therefore has covalent bonding among the silicon and nitrogen atoms in its structure.
Silicon nitride is basically a chemical compound consisting of the elements silicon and nitrogen. It has the chemical formula Si₃N₄. It is the most thermodynamically stable as well as the most commercially important among the silicon nitride. It is a white solid with a high-melting-point solid that is relatively chemically inert.
The nitrogen is more electronegative in nature as compared to silicon and pulls the electrons towards itself. Therefore, covalent bonding is observed in the silicon and nitrogen atoms present in silicon nitride.
To know more about silicon nitride here
https://brainly.com/question/14450798
#SPJ4
5
How many moles are in 2.70 X 1024 particles?
A 4.48 moles
B 1.60 x 1025 moles
C
1.60 x 1048 moles
D 0.448 moles
Answer:
A. 4.48 moles
To convert from the number of particles to the number of moles, we need to use Avogadro's number, which is the number of particles in one mole of a substance. Avogadro's number is approximately 6.022 x 10^23 particles/mole. So, to find the number of moles, we divide the number of particles by Avogadro's number:
2.70 x 1024 particles / (6.022 x 10^23 particles/mole) = 4.48 moles
Therefore, the answer is A. 4.48 moles.
Where are atoms made from?
Answer: subatomic particles Explanation: all atoms are made from smaller particles called subatomic particles these come in three types;
Atoms made from the fundamental particles like electrons, protons and neutrons.
What components comprise as atoms?An atom is made up of a core nucleus and one or even more negatively charged electrons that orbit it. The positively charged, moderately massive protons and neutrons that constitute the nucleus may be included. The foundational building blocks of matter are atoms.
Are new atoms formed?Stars can generate nuclei in one of two ways: either by merging two smaller nuclei together (a process known as fusion), or by splitting a bigger nucleus into several smaller nuclei (called fission).
Can an atom be destroyed?The law of energy conservation implies that matter cannot be created or destroyed. As a consequence, an atom cannot be destroyed or split into smaller particles.
Learn more about atoms here:
brainly.com/question/14428771
#SPJ4
What is the minimum discharge time for both sizes of portable potassium bicarbonate (PKP) extinguishers?
Answer:The minimum discharge time for portable potassium bicarbonate (PKP) extinguishers can vary based on the size and manufacturer of the extinguisher
Explanation:
The minimum discharge time for both sizes of portable potassium bicarbonate (PKP) extinguishers 10 seconds to 11 seconds.
What is portable potassium bicarbonate ?Extinguisher, a portable or mobile device used to douse a small fire with a substance that cools the burning material, robs the flame of oxygen, or thwarts the chemical reactions taking place in the flame.
Class A extinguishers can extinguish fires in common combustibles such wood, fabric, rubber, paper, and many types of plastic. Use class B extinguishers against flammable liquids including grease, gasoline, solvents, lacquers, alcohols, and other compounds of a similar nature.
Learn more about Extinguisher here:
https://brainly.com/question/17687941
#SPJ4
When a neutral atom either loe or gain an electron, it become electrically charged and become a
When a neutral atom either lose or gain an electron, it become electrically charged and become an ion.
An ion is defined as an electrically charged particle produced by either removing electrons from a neutral atom to give a positive ion or adding electrons to a neutral atom to give a negative ion. During the formation of an ion, the number of protons does not change.
When an electron is lost from a neutral atom it becomes positively charged and a cation (positively charged) ion is formed. Similarly, when an electron is gained to a neutral atom it becomes negatively charged and anion (negatively charged) ion is formed.
Learn more about neutral atom from the link given below.
https://brainly.com/question/29757010
#SPJ4
naturally occurring thallium has two isotopes, thallium-203 (202.9723442 amu) and thallium-205 (204.9744275 amu). the atomic mass of thallium is 204.38 amu. what is the percent of thallium-205?
The percentage of Thallium-205-205 in the isotope is 70%.
The naturally occurring thallium has two isotopes,
thallium-203 (202.9723442 amu) and thallium-205 (204.9744275 amu) the atomic mass of thallium is 204.38 amu.
Thallium-203 & 205 compounds are used in rat and ant poisons. Also it is used for detecting infrared radiation.
Thallium has not been produced in the United States since 1984, but is imported for use in the manufacture of electronics, low temperature thermometers, optical lenses, and imitation precious jewels.Let us say we have X% of Ti-205. Then the rest (100-X)% is the Ti-203 percentage.
It is given that average atomic mass of Ti is 204.4.
Mass of Ti-205 in isotope =[tex]\frac{X}{100}*205[/tex]
Mass of Ti-203 in isotope =[tex]\frac{100-X}{100}*203[/tex]
[tex]\frac{X}{100}*205+\frac{(100-X) }{100}*203=204.4[/tex]
205X+20300-203X = 20440
X = 70
So,
Therefore, the percentage of Ti-205 in the isotope is 70%.
For more such questions on thallium
https://brainly.com/question/25203208
#SPJ4
Please help ty have a good weekend
Nuclear fission is the process in which a heavy nucleus is split into two or more lighter nuclei, releasing energy in the process.
Radioactive decay reactionNuclear fusion is the process of combining two light nuclei into a heavier nucleus, releasing energy in the process.Nuclear decay is the process in which an unstable nucleus breaks down into one or more stable nuclei, releasing energy in the process.Alpha decay is a type of radioactive decay in which an unstable nucleus emits an alpha particle (a helium nucleus) and becomes a new, more stable nucleus.Beta decay is a type of radioactive decay in which an unstable nucleus emits an electron (or positron) and becomes a new, more stable nucleus.Gamma decay is a type of radioactive decay in which an unstable nucleus emits a high-energy photon and becomes a new, more stable nucleus.Nuclear transmutation is the process in which a nucleus changes its composition by gaining or losing protons, neutrons, or both.33K → +1e+ is a nuclear equation which describes the process of beta decay.+n→ 12Ba + Kr+ 3n is a nuclear equation which describes the process of nuclear fission.232 + 2He→ + an is a nuclear equation which describes the process of nuclear fusion.11. 14C - 14N+ is a nuclear equation which describes the process of nuclear decay.Re+ Re+H is a nuclear equation which describes the process of nuclear transmutation.Na + 10 Ne is a nuclear equation which describes the process of nuclear transmutation.21 Po- 84 + He is a nuclear equation which describes the process of nuclear fusion.253Es+ He→an+ is a nuclear equation which describes the process of nuclear fusion.To learn more about radioactive decay reaction refer to:
https://brainly.com/question/24115447
#SPJ1
what term describes the calculations used to relate the amounts of reactants and products in a chemical reaction
The term that describes the calculations used to relate the amounts of reactants and products in a chemical reaction is stoichiometry.
Stoichiometry is the branch of chemistry that deals with the quantitative aspects of chemical reactions. It involves the calculation of the ratios of reactants and products involved in a chemical reaction based on their chemical formulas and the balanced chemical equation.
Stoichiometry helps to determine the amount of product that can be produced from a given amount of reactant, the amount of reactant required to produce a given amount of product, and other related quantities. The calculations of stoichiometry are essential for the accurate prediction of the results of chemical reactions, for example, for the optimization of industrial processes.
Learn more about Stoichiometry here: https://brainly.com/question/14935523
#SPJ4
the number density in a container of neon gas is 5.40×1025 m−3. the atoms are moving with an rms speed of 705 m/s.
The rms speed of the neon gas is 705 m/s.
The number density of a gas is defined as the number of atoms or molecules per unit volume.
In the case of neon gas, the number density can be calculated using the formula:
Number Density (n) = Number of Particles/ Volume
Therefore, n = 5.40 × 1025 m-3
The root-mean-square (rms) speed of a gas is the square root of the average of the squared speeds of the particles in the gas.
The rms speed of the neon gas can be calculated using the formula:
RMS Speed = (3RT/M)^0.5
where R is the ideal gas constant (8.314 J/mol K), T is the temperature in Kelvin, and M is the molar mass of the gas (20.18 g/mol).
Therefore, the rms speed of the neon gas is 705 m/s.
Learn more about neon gas here:
https://brainly.com/question/7744281
#SPJ4
for the dehydrohalogenation (e2) reaction shown, draw the major organic product, including stereochemistry
For the dehydrohalogenation (e2) reaction Major and minor product is given in the image attached.
In this case, less substituted alkene is major product because tert-butoxide is very strong base and give kinetic controlled product (less stable product), it will abstract most acidic, least substituted H+ and form product.
However when other base such as [tex]NaOCH_{3}[/tex] etc. is used more substituted alkene will be major product.
The E2 process is the most typical dehydrohalogenation mechanism. All bonds are broken and created in a single step during the concerted reaction. Zaitsev product production is favored by regioselective E2 reactions. There are two processes through which the rate is influenced by the base, leaving group, and solvent identities.
Learn more about dehydrohalogenation:
brainly.com/question/7318445
#SPJ4
how many molecules of igg have to bind to ig fc regions to activate complement?
Two or more IgG molecules are required to bind with Ig FC regions to activate complement.
Usually a single molecule of IgM is sufficient to activate complement, whereas many molecules of IgG are required to bound to a particle and are required for activation, presumably because two side-by-side IgG's are needed for induction of this process, and in the setting of a random distribution, a large number would be required on the surface for the formation activated complex.
The Fc portion of immunoglobulin G (IgG) is defined as a horseshoe-shaped homodimer, which interacts with various effector proteins, including Fcγ receptors (FcγRs).
Learn more about IgG molecules from the link given below.
https://brainly.com/question/29514512
#SPJ4
hat is the name of the compound below? the line-angle structure shows a ring with six vertices and a circle inscribed, with a ch3 group attached to the first carbon and a cl atom attached to the second (clockwise) carbon. what is the name of the compound below? the line-angle structure shows a ring with six vertices and a circle inscribed, with a ch3 group attached to the first carbon and a cl atom attached to the second (clockwise) carbon. 1-chlorotoluene 2-chlorotoluene 3-chlorotoluene 4-chlorotoluene 5-chlorotoluene
The name of the compound is 2-chlorotoluene.
In natural science, the naming of mixtures keeps explicit guidelines and shows. The line-point structure you have given addresses a six-membered aromatic ring with a circle engraved, showing that it is a benzene ring.
The presence of a CH3 bunch joined to the main carbon and a Cl particle connected to the subsequent carbon demonstrates that the particle is chlorinated toluene.
To name the compound, we follow the show of numbering the carbons in the benzene ring with the end goal that the substituents get the most reduced conceivable number.
Learn more about the chemical compound:
https://brainly.com/question/12166462?referrer=searchResults
#SPJ4
how does hydrogen bonding contribute to water's high specific heat
Water's high specific heat capacity is the property caused by the hydrogen bonding among water molecules. When heat is absorbed, hydrogen bonds will broken and the water molecules can move freely.
When the temperature of the water will decreases, then the hydrogen bonds are formed as well as release a considerable amount of energy.
Hydrogen bonds will allow the ions and the other polar molecules to dissolve in water. Therefore, water is an excellent solvent. The hydrogen bonds between the water molecules causes the water to have a high heat capacity, means it takes a lot of added heat to raise its temperature.
To know more about specific heat here
https://brainly.com/question/11297584
#SPJ4
which is more polar, ortho-bromonitrobenzene or para-bromonitrobenzene? how do you know this? which do you expect to "stick" more to the tlc plate?
Ortho-bromonitrobenzene is more polar you would expect ortho-bromonitrobenzene to “stick” more to the TLC plate.
Ortho-Bromo nitrobenzene is more polar than para-Bromo nitrobenzene due to the orientation of the bromine substituent. Ortho-bromonitrobenzene has two bromine substituents that are in an ortho position, meaning they are directly opposite each other on the benzene ring. This causes the molecule to be more polar, as the ortho position is more electronegative than the para position. As a result, ortho-bromonitrobenzene is more polar than para-bromonitrobenzene.
You would expect ortho-bromonitrobenzene to “stick” more to the TLC plate because it is more polar than para-bromonitrobenzene. Polar molecules have a greater tendency to interact with other polar molecules, such as the polar silica gel on the TLC plates. This interaction results in a greater “stickiness” of the ortho-bromonitrobenzene to the TLC plate.
To know more about TLC plate please refer:
https://brainly.com/question/17562109
#SPJ4
what is the relationship between alcohols i and ii
Different conformations of the same chemical are what bind alcohols I and II together. Atom to atom bonding and the molecular formula are both same. b) The stereochemistr
Our task is to determine how alcohol and other substances are related. Alcohol has been supplied with the structures. A collection of atoms is joined by a carbon atom. Since the functional group is positioned the same in both instances yet the atoms are attached differently in the second molecule, they claim that they are not constitutional isomers. These isomers are not constitutional. The atoms are depicted in this symbol as being both above and below the plane. Here is a picture of the structure of 2-methyl cyclopentanol. The 2 molecule also serves as a representation of this.
To learn more about alcohols please click on below link
https://brainly.com/question/1216922
#SPJ4
The vapor above an aqueous solution contains 18.8 mg water per liter at 25 ∘C. Assuming ideal behavior, what is the concentration of the solute within the solution in mole percent?
(n / (n + 1.05 x 10^-3)) x 100 is the concentration of the solute within the solution in mole percent.
The concentration of a solute in a solution can be expressed in mole percent (mol%) if we know the number of moles of solute and the number of moles of solvent. In the given scenario, we are given the amount of water present in the vapor above the solution, which can be converted to moles using the molar mass of water (18.015 g/mol).
= 18.8 mg
= 18.8 x 10^-3 g
= (18.8 x 10^-3) / 18.015 mol
= 1.05 x 10^-3 mol
Let's assume the solution contains n moles of solute and 1.05 x 10^-3 mol of water. Then, the concentration of the solute in mole percent can be calculated as:
mol% solute = (n / (n + 1.05 x 10^-3)) x 100
To know more about solute please refer:
https://brainly.com/question/7932885
#SPJ4
Describe the change that you made that led to the increase in the size of the clawcat population. Explain why the change led to an increase in the clawcat population size.
The first step is to lessen the number of the organism which consumes clawcats. The second is to enhance the resources Clawncat requires to live.
What is population?Population is the total number of people living in a region (such as a nation or the planet), which is always changing due to births, immigration, and natural mortality.
There are two ways to boost the Clawcat population. The first step is to lessen the number of the organism which consumes clawcats. The second is to enhance the resources Clawncat requires to live, namely by expanding the plantation of Clawncat, providing enough irrigation, giving full access to sunshine, and increasing the richness of the soil through proper and effective fertilization.
Therefore, in the above given ways we can increase the population of Clawncat.
To learn more about population, here:
https://brainly.com/question/27779235
#SPJ1
how to find the buffering capacity of aspirin lab
Aspirin lab is a common experiment used in high school chemistry to determine the buffering capacity of aspirin, which is a commonly used pain reliever and anti-inflammatory medication. Buffering capacity refers to the ability of a solution to resist changes in pH when an acid or base is added to it. In this lab, you will use a pH meter to measure the changes in pH of a solution of aspirin after adding a strong base, such as sodium hydroxide (NaOH).
To find the buffering capacity of aspirin, you need to start by preparing a solution of aspirin in water. To do this, weigh a certain amount of aspirin tablets and crush them into a powder. Dissolve the powder in a specific amount of water and stir until the aspirin is completely dissolved. Then, use a pH meter to measure the initial pH of the solution.
Next, add a small amount of sodium hydroxide to the solution and stir it well. Then, measure the pH of the solution again. Repeat the process of adding sodium hydroxide and measuring the pH until the pH reaches a maximum value. The amount of sodium hydroxide added at this point is called the buffering capacity of aspirin.
The buffering capacity of aspirin is an important factor in determining its effectiveness as a pain reliever. If the buffering capacity is high, it means that the solution can resist changes in pH and maintain a stable pH, which can help to reduce pain and inflammation. On the other hand, if the buffering capacity is low, it means that the solution is not very effective at resisting changes in pH and may not provide the same level of pain relief.
In conclusion, the buffering capacity of aspirin can be found by preparing a solution of aspirin, measuring its initial pH, and adding a strong base to it until the pH reaches a maximum value. The amount of base added at this point is the buffering capacity of the aspirin.
To learn more about sodium hydroxide (NaOH), visit:
https://brainly.com/question/16238611#
#SPJ11
which of the hydrocarbons in the following group are isomers? select all that apply. h52256b h52256a h5ch2p24qab h5ch2p24qaa
All of these hydrocarbons H52256B, H52256A, H5CH2P24QAB, H5CH2P24QAA are isomers.
An isomer is a compound with the same molecular formula as another but with a different arrangement of atoms in its molecular structure. All four of the hydrocarbons listed are isomers because they have the same molecular formula but different arrangements of their atoms, resulting in distinct molecular structures.
The different arrangements can come from differences in the order of bonding between the atoms, differences in the orientation of functional groups within the molecules, or differences in the placement of double bonds. These differences in molecular structure lead to unique physical and chemical properties for each isomer.
To learn more about isomer visit: https://brainly.com/question/18474884
#SPJ4
A certain atom is spherical with a radius of 0.200 nm. What is the volume of the atom?
A certain atom is the spherical with the radius of 0.200 nm. The volume of the atom is 3.34 × 10⁻²⁹ m³.
The radius of the spherical atom = 0.200 nm
The volume of the spherical atom is as follows :
The volume of atom = (4/3) π r³
where ,
The r = 0.2 nm = 2 × 10⁻¹⁰ m
The volume of the spherical atom = ( 4/3 ) × 3.14 × (2 × 10⁻¹⁰ m)³
The volume of the spherical atom = 4.186 × 8 × 10⁻³⁰ m³
The volume of the spherical atom = 3.34 × 10⁻²⁹ m³.
To learn more about volume here
https://brainly.com/question/13109473
#SPJ4
spontaneous process is more favorable when there is an increase in the distribution of particles.
Option A is correct. Unexpected Reactions. Favorable reactions are those that cause the system's enthalpy to drop while its entropy rises. The reaction happens naturally when both of these conditions are true.
According to the Second Law of Thermodynamics, an increase in entropy is necessary for a reaction to be spontaneous. Free energy is released as spontaneous reactions take place. Recall that the enthalpy and entropy changes that occur for the system are what determine the spontaneity of a reaction. The enthalpy change and the entropy change are mathematically combined to provide the free energy change of a reaction. Unexpected Reactions. Favorable reactions are those that cause the system's enthalpy to drop while its entropy rises. The reaction happens naturally when both of these conditions are true.
The complete question is in the images.
Learn more about entropy here-
https://brainly.com/question/13135498
#SPJ4
which one of the following carbonate species is the predominate one at ph 7?
Today's ocean's surface waters typically have a pH of 8.1, making HCO3- the major carbonate species and accounting for over 90% of DIC.
CO2(aq) makes up less than 1% of DIC, while CO32- is the species with the next highest abundance (10% of DIC). Na2CO3 is a salt that dissolves in liquid water and when ingested raises pH (decreases the amount of free H+ ions dissolved in the water). This is a result of the salt's strong base, CO3 2-. We can infer that Na2CO3 has a pH of 11 as a result. Today's ocean's surface waters typically have a pH of 8.1, making HCO3- the major carbonate species and accounting for over 90% of DIC.
The complete question is- Which species is predominant in water bodies carbon dioxide, carbonate ion or bicarbonate ion? Justify your reason?
Learn more about pH here-
https://brainly.com/question/15289741
#SPJ4
Propane is a gas used for cooking and heating. How many atoms are in 2.12 mol of propane (C₂H₂) Hint: 1 molecule C,H, 11 atoms (3 C and 8 H)
Answer:
Explanation:
First, let's determine the formula for propane. Propane has 3 carbon atoms and 8 hydrogen atoms.
CH₃CH₂CH₃
Second, use the number of moles of propane given in the problem (2.12 moles) and the formula for propane.
2.12 mol CH₃CH₂CH₃
Third, take 2.12 times the number of carbon atoms and the number of hydrogen atoms in propane.
There are 3 carbon atoms and 8 hydrogen atoms in propane.
2.12 x 3 carbon atoms = 6.36 carbon atoms
2.12 x 8 hydrogen atoms = 16.96 hydrogen atoms
suppose that you have a 43 ml solution of 0.23 m hcl that is being titrated with 0.17 m naoh. you stop the titration after adding 27 ml of naoh. what is the change in ph at this point?
After stopping the titration after adding 27ml NaOH, the change in pH is approximately 0.23 units.
To find the change in pH during the titration, we need to calculate the amount of HCl that has reacted with NaOH.
First, let's find the moles of NaOH added:
Moles of NaOH = Concentration x Volume
Moles of NaOH = 0.17 M x 0.027 L = 0.00459 mol
Since the ratio of HCl to NaOH is 1:1, this means that 0.00459 mol of HCl has reacted with 0.00459 mol of NaOH.
Next, let's find the moles of HCl remaining in the solution:
Initial moles of HCl = 0.23 M x 0.043 L = 0.00999 mol
Final moles of HCl = Initial moles of HCl - Reacted moles of HCl
Final moles of HCl = 0.00999 mol - 0.00459 mol = 0.00540 mol
Now that we know the moles of HCl remaining, we can find the new concentration of HCl:
New concentration of HCl = Final moles of HCl / Total volume
New concentration of HCl = 0.00540 mol / (0.043 L + 0.027 L) = 0.056 M
Finally, we can use the new concentration of HCl to find the change in pH:
pH = -log[H+]
Change in pH = -log[0.056] - (-log[0.23])
Change in pH = -log[0.056] + log[0.23]
Change in pH = approximately 0.23.
So, the change in pH is approximately 0.23 units.
Learn more about titration here:
https://brainly.com/question/2728613
#SPJ4
which four elements comprise approximately 96% of our body weight? which four elements comprise approximately 96% of our body weight? carbon, oxygen, hydrogen, and potassium. carbon, oxygen, potassium, and sodium. carbon, oxygen, hydrogen, and nitrogen. carbon, oxygen, iron, and potassium
The four elements that comprise approximately 96% of our body weight are carbon, oxygen, hydrogen, and nitrogen.
The mass of our bodies is composed almost entirely of carbon, hydrogen, oxygen, and nitrogen. The remaining four percent of a person's body weight is almost entirely made up of the elements sodium, potassium, magnesium, calcium, iron, phosphorus, sulfur, chlorine, and iodine.
To all intents and purposes, the human body is a phenomenally complicated piece of machinery. This demands a wide variety of components, all of which must cooperate with one another in intricately intertwined connections, on scales ranging from the micromolecular to the macromolecular.
The amount of chemical elements and how they interact with one another is what determines the structure of the building blocks that make up the sum of these parts, such as proteins and nucleic acids.
Want to know more about elements visit the link which is given below;
https://brainly.com/question/29794315
#SPJ4
predict the approximate bond angles in the molecule. h2c=c=ch2
In the molecule H₂C=C=CH₂, the bond angles are expected to be around 120 degrees. This is because the molecule is linear and has a planar structure with two double bonds and two single bonds, which would form bond angles of roughly 120 degrees between adjacent bonds. The bond angles in this molecule are close to the ideal bond angles for a sp2 hybridized carbon atom.
The molecule is linear and has a planar structure with two double bonds and two single bonds, which would form bond angles of roughly 120 degrees between adjacent bonds. Bond angle is the angle formed by the intersection of two bonds attached to the same atom. It is a measure of the spatial arrangement of atoms in a molecule and helps to determine the molecular shape. Bond angles are determined by the hybridization of the central atom and the repulsion between the electron pairs in the bonds.
Learn more about Bond angle:
brainly.com/question/13751116
#SPJ4
2 03(g) → 3 0₂(8) AH=-285 kJ/mol,
The bond enthalpy of the oxygen-oxygen bond in O, is 498 kJ/mol. Based on the enthalpy of the reaction represented above, what is the average bond enthalpy, in kJ/mol, of an oxygen-oxygen bond in 03?
Please help meee
The enthalpy of formation of ozone is 142.7 kJ / mol. The bond energy of O2 is 498 kJ / mol.
What is the oxygen oxygen bond’s bond enthalpy?498 kJ/mol
The bond energy of molecular oxygen, O2, is 498 kJ/mol and is photolyzed by light of 241 nm. HOOH, which has an extremely weak O-O bond, is photolyzed by light at 845 nm. Alternatively, the usual enthalpy of production of oxygen is zero because diatomic oxygen in its gaseous phase is the most stable form compared to mono-atomic oxygen (O) and triatomic oxygen (O3).
The elements that will react to generate H2O are present in their elemental forms. Because it takes no energy to generate a naturally occurring compound, the enthalpy of formation for an element in its elemental state will always be 0.
To learn more about bond enthalpy to refer:
https://brainly.com/question/29633366
#SPJ1
how many valance electrons would phosphorus (p) have, number of paired electrons and number of unpaired electrons?
Phosphorus (P) has 5 valence electrons. In its ground state, it will have 3 paired electrons and 2 unpaired electrons.
The number of valence electrons can be determined by using the periodic table. Look for the element in question, and identify its atomic number (the number of protons in the nucleus of an atom of that element). Then, use the electron configuration of the element to determine the number of valence electrons by counting the number of electrons in the outermost energy level (valence shell).
The electron configuration of Phosphorus (P) is: 1s2 2s2 2p6 3s2 3p3.
The outermost shell contains 5 electrons, thus 5 valence electrons.
The number of paired and unpaired electrons in an atom can be determined from its electron configuration also. If there are two electrons in a given energy level with opposite spins, they form a pair and are considered to be paired electrons. If there is only one electron in a given energy level, it has no pair and is considered to be an unpaired electron.
Hence, phosphorus will have 3 paired electrons and 2 unpaired electrons.
Learn more about valence electrons here: https://brainly.com/question/27644273
#SPJ4
. you have two containers each with 1 mole of xenon gas at 15oc. container a has a volume of 3.0 l, and con- tainer b has a volume of 1.0 l. explain how the follow- ing quantities compare between the two containers.
(1) The average kinetic energy of the Xe atom will be the same
(2) Container B's walls will have more atomic collision force.
(3) The root mean square velocity will be same
(4) Collision is higher in container B than in container A.
(5) Container B will experience more pressure than container A.
(1) Average kinetic energy
Absolute temperature has a direct relationship with average kinetic energy. The average kinetic energy of the Xe atom will be the same because the temperatures in both containers are the same.
(2) Force due to collisions with walls
The volume of the container has an inverse relationship with the force of atomic collisions. Container B is shorter since it contains less volume. As a result, container B's walls will experience more atomic collision force.
(3) The root mean square velocity
The root mean square velocity of the Xe atoms in both containers will be the same because they are both at the same temperature.
(4) The collision frequency with other atoms
The volume of the container has an inverse relationship with the frequency of collisions with other atoms. Because container B is smaller than container A, the frequency of Xe atoms colliding with other atoms will be higher in container B than in container A.
(5) Pressure in two containers
As is common knowledge, pressure and volume are inversely related. A container has a larger volume than container B. Thus, container B will experience more pressure than container A.
For more questions on volume of gases
https://brainly.com/question/14983694
#SPJ4
You have two containers each with 1 mole of Xenon gas at [tex]15^{0}[/tex] C. Container A has a volume of 3.0 L, and the container B has a volume of 1.0 L. Explain how the following quantities compare between the two containers:
Average kinetic energy of the Xe atomsThe force with which the Xe atoms collide the container walls.The root mean square velocity of the Xe atomsThe collisions frequency of the Xe atoms(with other atoms)The pressure of the Xe samplewhat is the volume (liters) of 23.5 g of i2 at stp?
The volume in Liters , of the 23.5 g of the I₂ at the STP condition that is 273 K and 1 atm is 2.0 L.
The ideal gas equation is as :
P V = n R T
V - n R T / P
where,
P = pressure of the gas
n = number of moles
R = gas constant
T = temperature
The STP condition is : The temperature is 273 K and the Pressure is 1 atm.
The moles = mass / molar mass
The moles = 23.5 / 253.8
The moles = 0.092 mol
By solving the values, we get
V = ( 0.092 × 0.082 × 273 ) / 1
V = 2.0 L
Thus, the volume is 2.0 L.
To learn more about volume here
https://brainly.com/question/9221475
#SPJ4
