calculate the volume of 0.100 m h3po4 required to neutralize 30 m l of 0.050 m caoh2

The galvanic cell shown below produces an electric current. The statement concerning this galvanic cell that must be true is given below. "The oxidation half-reaction occurs at the anode, and the reduction half-reaction occurs at the cathode."

Explanation:A galvanic cell is an electrochemical cell that converts the chemical energy of a spontaneous redox reaction into electrical energy. The electrons move from the anode to the cathode in a galvanic cell.The statement concerning this galvanic cell that must be true is "The oxidation half-reaction occurs at the anode, and the reduction half-reaction occurs at the cathode."

The anode is the electrode where oxidation occurs, whereas the cathode is the electrode where reduction occurs in a galvanic cell.A spontaneous oxidation-reduction reaction occurs in a galvanic cell, and the reaction proceeds due to the transfer of electrons from the anode to the cathode. Therefore, in this galvanic cell, electrons move from the anode to the cathode.

To know more about oxidation visit:

https://brainly.com/question/13182308

#SPJ11

The net torque required to accelerate a uniform disk of radius 6.0 m and mass 3.20 X 104 kg is 1.22 × 10^6 N.m. Assuming the merry-go-round is a uniform disk of radius 6.0 m and mass 3.20×10^4 kg,

the moment of inertia (I) of the merry-go-round is given by the equation:

I = (1/2) mr² where m is the mass and r is the radius of the merry-go-round.

I = (1/2)(3.20 × 10^4 kg)(6.0 m)²I

= 3.84 × 10^5 kg.m²

The net torque required to accelerate a uniform disk is given by the equation:

τ = Iαwhere τ is the net torque, I is the moment of inertia, and α is the angular acceleration.

Since the merry-go-round is being accelerated from rest, the initial angular velocity (ω0) is zero. The final angular velocity (ω) is not given. Therefore, we can use the equation:ω² = ω0² + 2αθwhere θ is the angle through which the merry-go-round rotates and can be taken as 1 revolution or 2π radians. Substituting the given values, we get:ω² = 0 + 2α(2π)ω² = 4παThe final angular velocity (ω) can also be written in terms of linear velocity (v) using the equation: v = rωwhere r is the radius of the merry-go-round. Substituting the given values, we get: v = (6.0 m)ωWe can now use the equation: F = ma to calculate the net force required to accelerate the merry-go-round, where F is the net force, m is the mass of the merry-go-round, and a is the linear acceleration.

Since the linear acceleration is related to the angular acceleration by the equation:

a = rαwe can rewrite the equation as:

F = mr α Substituting the given values,

we get:  F = (3.20 × 10^4 kg)(2α)(6.0 m)F

= 3.84 × 10^5 α NN

is the net force required to accelerate the merry-go-round.

The net torque required to produce this force can be calculated using the equation:τ

= r F Substituting the given values,

we get:τ = (6.0 m)(3.84 × 10^5 α N)τ = 2.30 × 10^6 α N.m

Since τ = Iα, we can substitute this value to get:

2.30 × 10^6 α N.m = (3.84 × 10^5 kg.m²)α

Therefore,

α = 6 N.m/ (3.84 × 10^5 kg.m²)α

= 1.56 × 10^-5 rad/s²Substituting this value into the equation:τ

= 2.30 × 10^6 α N.mτ = (2.30 × 10^6 N.m) (1.56 × 10^-5)τ = 1.22 × 10^1 N.m

Therefore, the net torque required to accelerate the merry-go-round is 1.22 × 10^6 N.m.

To know more about moment of inertia refer to:

https://brainly.com/question/29375819

#SPJ11

The equilibrium constant expression for the given reaction is: Kc = [HOC1]2[HgCl2] / [Cl2]2.

In order to determine the equilibrium constant expression for the given reaction, it is important to know the relationship between the concentrations of reactants and products at equilibrium. For this, we use the law of mass action, which states that the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations.

Reactants raised to their stoichiometric coefficients is equal to the equilibrium constant. This can be expressed mathematically as:Kc = [HOC1]2[HgO][HgCl2] / [HgO]2[Cl2]2[H2O]We can simplify the above expression by eliminating the concentration of water as it is in excess. Also, we know that the concentration of the solid is constant.

To know more about constant visit:

https://brainly.com/question/31730278

#SPJ11

Of the substances listed, the ones that are generally soluble in water are:

1. Na₃PO₄ (sodium phosphate)

2. NaOH (sodium hydroxide)

3. K₂SO₄ (potassium sulfate)

These compounds are considered soluble in water because they form ions when dissolved, and their ions have a strong affinity for water molecules, resulting in a homogeneous mixture.

The following substances are generally insoluble or have low solubility in water:

1. PbI₂ (lead(II) iodide)

2. AgCl (silver chloride)

3. SnCO₃ (tin(II) carbonate)

These compounds have low solubility in water, meaning that only a small amount of the compound will dissolve in water to form ions.

It's important to note that the solubility of substances can vary depending on factors such as temperature and the presence of other solutes. The solubility of a compound is typically indicated in solubility tables or can be experimentally determined.

Learn more about solubility at https://brainly.com/question/24057916

#SPJ11

The basis for the corresponding eigenspace for the given eigenvalues of the matrix a is { [1; -1] } and { [2; 1] }.

Given the matrix a, the corresponding eigenspace for the given eigenvalue has to be found. Let the matrix a be defined as follows:a

= [4 2; 1 3]

To find the eigenvectors and eigenvalues, let's start by finding the characteristic equation of the matrix

a.|a - λI| = 0

Here, a is the given matrix, λ is the eigenvalue and I is the identity matrix of the same order as that of

a.|a - λI| = [4-λ 2; 1 3-λ]

= (4-λ)(3-λ) - 2

= λ^2 - 7λ + 10

= (λ - 2)(λ - 5)

On solving the above quadratic equation, we get the eigenvalues of the matrix a as

λ1 = 2 and λ2 = 5.

To find the eigenvectors, we need to solve the following equation for each eigenvalue:

(a - λI)x = 0For λ1

= 2,

we have a - λ1I = [2 2; 1 1].

Solving the equation

(a - λ1I)x = 0,

we get

x = α[1; -1], where α is any non-zero constant.

For λ2 = 5, we have a - λ2I = [-1 2; 1 -2].

Solving the equation (a - λ2I)x = 0, we get

x = β[2; 1],

where β is any non-zero constant.

Hence, the basis for the eigenspace corresponding to λ1 = 2 is { [1; -1] } and the basis for the eigenspace corresponding to λ2 = 5 is { [2; 1] }.

Therefore, the basis for the corresponding eigenspace for the given eigenvalues of the matrix a is { [1; -1] } and { [2; 1] }.

To know more about eigenspace visit:

https://brainly.com/question/28564799

#SPJ11

Sodium fluoride is a common ingredient in mouthwash. Its chemical formula is NaF. Sodium fluoride is a white crystalline powder with a bitter taste. It is soluble in water, and its solubility increases with temperature. Sodium fluoride is used in the production of toothpaste, mouthwash, and other dental products to prevent dental caries.

Sodium fluoride is added to toothpaste and mouthwash because it helps to reduce the risk of tooth decay. The chemical equation for sodium fluoride in mouthwash is as follows: NaF (s) + H2O (l) → Na+ (aq) + F- (aq) + H2O (l)Sodium fluoride is an ionic compound, meaning that it is composed of a positively charged ion (Na+) and a negatively charged ion (F-). When sodium fluoride is added to water, it dissolves and dissociates into its constituent ions, Na+ and F-.

These ions can then react with the teeth and prevent the formation of dental caries. The fluoride ion reacts with the calcium ions in the enamel of the teeth to form a more stable compound, calcium fluoride (CaF2). This process is called remineralization and helps to repair and strengthen the enamel of the teeth. In summary, the chemical equation for sodium fluoride in mouthwash is NaF (s) + H2O (l) → Na+ (aq) + F- (aq) + H2O (l). This equation shows how sodium fluoride dissolves in water to form its constituent ions, which then react with the teeth to prevent dental caries.

To know more about remineralization  visit

https://brainly.com/question/31852961

#SPJ11

The correct equilibrium constant (K) for the reaction CO(OH)₂(s) + 6 NH₃(aq) = Co(NH₃)₆²⁺ (aq) + 2 OH⁻(aq) is K = 2.5 x 10⁻²⁰.

The given reaction is a complex ion formation reaction. In the reaction, carbon monoxide hydroxide and ammonia react to form a complex ion of cobalt hexamine and two hydroxide ions.

The equation for the above reaction can be written as:

CO(OH)₂(s) + 6NH₃(aq) ⇌ Co(NH3)₆²⁺(aq) + 2OH⁻(aq)In order to find the value of K, we need to first find the concentration of each of the products and reactants.

The concentration of Co(NH₃)₆²⁺(aq) is equivalent to the concentration of the complex ion because it is a product.

Learn more about equilibrium reactions at:

https://brainly.com/question/9987351

#SPJ11

The correct equilibrium constant (k) for the reaction

CO(OH)2(s) + 6 NH3(aq) = Co(NH3)62 + (aq) + 2 OH"(aq)

is K = 2.5 x 10-20.

Equilibrium constant is defined as the product of concentrations of products raised to their stoichiometric coefficients in the balanced chemical equation divided by the product of concentrations of reactants raised to their stoichiometric coefficients in the balanced chemical equation. It is denoted by K.

We can calculate the equilibrium constant (K) if we know the concentrations of reactants and products at equilibrium. If we are given equilibrium constant (K) and concentrations of reactants or products, we can calculate the remaining equilibrium concentration.

To know more about equilibrium constant visit:

https://brainly.com/question/28559466

#SPJ11

Area of one molecule of stearic acid = (Surface area of the water / Number of molecules on the surface) × 2.

Given, surface area of the water (cm²) = 40.7, 40.7, 37.4, 37.4The area of one molecule of stearic acid can be calculated using the formula: Area of one molecule of stearic acid = (Surface area of the water / Number of molecules on the surface) × 2.

Let's calculate the number of molecules on the surface: Number of molecules on the surface = 2 × (6.022 × 10²³) / (18 × 10⁻³)Number of molecules on the surface = 2.006 × 10²⁹ molecules/m²Substitute the value of surface area of the water and number of molecules on the surface in the formula: Area of one molecule of stearic acid = (40.7 cm² / 2.006 × 10²⁹ molecules/m²) × 2 Area of one molecule of stearic acid = 4.054 × 10⁻²⁷ cm² (approx)Therefore, the area of one molecule of stearic acid is 4.054 × 10⁻²⁷ cm².

To know more about stearic acid visit:

https://brainly.com/question/16233112

#SPJ11

Sodium metal crystallizes in a body-centered cubic lattice with a unit cell edge of 4.29 Å.

We need to determine the radius (in Å) of a sodium atom. The correct option among the given options is (b) 3.22.

We know the formula of the volume of the unit cell in the bcc lattice, which is given byV = (πa³/6)The volume of the unit cell can also be expressed in terms of the radius of the atoms contained in it.

Therefore, we can say that

V = (4/3) πr³

For sodium metal, we can equate the above two expressions as:

V = (πa³/6) = (4/3) πr³

π gets cancelled on both sides of the equation above.

Therefore:

(a³/6) = (4/3) r³a = 4.29 Å

From the above expression, we can obtain the radius of the sodium atom,

r = (a/2)(3/4) = (4.29/2)(3/4) = 3.22 Å

Thus, the radius of the sodium atom is 3.22 Å. The correct option among the given options is (b) 3.22.

learn more about cubic lattice here

https://brainly.com/question/31116263

#SPJ11

Water is one of the few substances that expands when it freezes from a liquid state to a solid state. The density of water decreases as it freezes because of hydrogen bonding. When water cools, its molecules move slowly, causing them to come closer together.

However, as the temperature continues to drop and the water starts to freeze, its molecules start forming a crystalline lattice structure. This structure forces the water molecules further apart from each other, which causes an expansion of about 9 percent in volume as compared to the volume of water in its liquid state.Water molecules bond together via hydrogen bonding when water is in its liquid state, which creates a three-dimensional network of interconnected molecules. This structure of interconnected molecules is maintained through hydrogen bonds, which are not very strong bonds in and of themselves.

When water is cooled, the hydrogen bonds become more stable and lock the molecules into a crystalline structure. The crystalline structure is less dense than the three-dimensional network of interconnected molecules that is characteristic of liquid water, so water expands when it freezes.It is significant that water expands when it freezes since it means that the density of water is highest at around 4 degrees Celsius. As water cools, it becomes denser and more massive until it reaches its freezing point. When it freezes, the ice floats on top of the water. If ice didn't float, lakes and oceans would freeze from the bottom up, killing the fish and other aquatic life that live in the water.

To know more about density  visit;-

https://brainly.com/question/29775886

#SPJ11

The given information for the question is as follows: Amount of pure hydrobromic acid = 156 mg Volume of solution = 220 ml

The formula for calculating the pH of a solution is as follows:

pH = -log[H+]The hydrobromic acid completely dissociates in water, so the concentration of H+ ions is equal to the concentration of the hydrobromic acid. The molecular mass of HBr = 1 + 79.904 = 80.904 g/mol Therefore, the number of moles of hydrobromic acid in the solution is:156 mg / 80.904 g/mol = 0.00193 mol

The concentration of the hydrobromic acid in the solution is:0.00193 mol / 0.220 L = 0.00877 M The pH of the solution can now be calculated: pH = -log[H+]pH = -log(0.00877)pH = 2.056Therefore, the pH of the solution is 2.06 (to two significant figures).

To know more about hydrobromic acid refer to:

https://brainly.com/question/30782351

#SPJ11

The most common solvent for the mixtures in the body is water. The answer is option (a) solvent.

Solvent is a chemical substance capable of dissolving or dispersing one or more other chemical substances or solutes, resulting in a homogeneous solution. The solvent is the component that is present in the largest amount within a solution. Water is the most commonly used solvent in biological systems. Many compounds used in biological processes, including proteins and carbohydrates, are water-soluble. Solute: A solute is a substance that is dissolved in a solution. It is the component of a solution that is present in a lower amount than the solvent. Solute can be organic or inorganic compounds or ions.

Medium: It is the material or substance in which an enzyme acts, or a chemical reaction takes place. Colloid: It is a substance that contains small, evenly distributed particles that do not settle out. This term is commonly used to describe a type of mixture that includes particles that range in size from 1 to 1000 nanometers. Colloidal particles are large enough to scatter light and make the mixture appear cloudy.

To know more about solvent visit:-

https://brainly.com/question/30452436

#SPJ11

The activity series can be used to predict whether a given reaction will occur or not. If the given reaction occurs, a balanced equation should be written.

The reaction between Mg (s) and ZnCl2 (aq) can be predicted using the activity series. If the activity of Mg is greater than the activity of Zn, the reaction will occur. If the activity of Zn is greater than the activity of Mg, the reaction will not occur. Mg (s) + ZnCl2 (aq) → MgCl2 (aq) + Zn (s)

The balanced equation for the reaction between Mg (s) and ZnCl2 (aq) is given as above. The reaction will occur since Mg has a higher activity than Zn. Therefore, the correct answer is: Balanced equation: Mg (s) + ZnCl2 (aq) → MgCl2 (aq) + Zn (s)

To know more about balanced equation refer to:

https://brainly.com/question/11904811

#SPJ11

Formic acid (HCOOH) undergoes ionization in water, as represented by the equation HCOOH ⇌ [tex]H^+ + COO^-[/tex]. The equilibrium constant for this reaction is given as [tex]K = 1.8 * 10^-^4[/tex]. This equilibrium constant value indicates that the ionization of formic acid.

In the presence of water, formic acid dissociates to form hydrogen ions (H⁺) and formate ions ([tex]COO^-[/tex]). The equilibrium constant (K) represents the ratio of the concentrations of the products ([tex]H^+[/tex] and [tex]COO^-[/tex]) to the concentration of the reactant (HCOOH) at equilibrium. A smaller value of K suggests that the concentration of the reactant is higher compared to the products, indicating that the forward reaction is less favored.

=In the case of formic acid, with an equilibrium constant of [tex]1.8 * 10^-^4[/tex], it suggests that the ionization of formic acid is not favored and the concentration of the reactant is significantly higher than the products at equilibrium. This indicates that formic acid exists predominantly in its molecular form rather than as ions in water.

Learn more about equilibrium constants here:

https://brainly.com/question/29809185

#SPJ11

Given that the mass of an atom of 135I is 134.910023 amu, We need to calculate the binding energy of the atom in MeV per atom. . An atom of 135I has a binding energy of 247.4 MeV per atom.

We know that mass defects can be used to calculate the binding energy of the atom. Mass defect = (Z * Mp + N * Mn - m)Where Z = Number of protons in the atom Mp = Mass of a proton N = Number of neutrons in the atom Mn = Mass of a neutron m = Mass of the atom Using the values from the question, we can calculate the mass defect: Z = 53 (From the atomic number of Iodine) Mp = 1.007276 amu Mn = 1.008665 amu N = 82 (Neutrons = Mass number - Atomic number)Mass of the atom, m = 134.910023 amu Mass defect = (53 * 1.007276 + 82 * 1.008665 - 134.910023) amu= (53.470328 + 82.70513 - 134.910023) amu= 0.265435 amu

The binding energy can be calculated as follows:

Binding Energy = (Mass defect) * (931.5 MeV/amu)

Binding Energy = 0.265435 * 931.5 MeV/amu

= 247.416525 MeV per atom Rounding off to 4 significant figures,

we get: Binding Energy = 247.4 MeV per atom. An atom of 135I has a binding energy of 247.4 MeV per atom.

To know more about neutron refer to:

https://brainly.com/question/26952570

#SPJ11

To completely react with the silver in a 25.0 ml 0.366 M aqueous silver nitrate solution, approximately 0.268 grams of solid sodium chloride must be added.

In order to determine the amount of solid sodium chloride required for the complete reaction, we need to use the balanced chemical equation for the reaction between sodium chloride (NaCl) and silver nitrate ([tex]AgNO_3[/tex]), which yields silver chloride (AgCl) and sodium nitrate ([tex]NaNO_3[/tex]). The balanced equation is as follows:

[tex]2AgNO_3 + NaCl[/tex] → [tex]2AgCl + NaNO_3[/tex]

From the equation, we can see that 2 moles of silver nitrate react with 1 mole of sodium chloride to produce 2 moles of silver chloride. Since the molarity of the silver nitrate solution is given as 0.366 M, we can calculate the number of moles of silver nitrate present in 25.0 ml (0.0250 L) of the solution using the formula:

moles of silver nitrate = molarity * volume in liters

Substituting the values, we find:

moles of silver nitrate = 0.366 M * 0.0250 L = 0.00915 moles

According to the stoichiometry of the reaction, 2 moles of silver nitrate react with 1 mole of sodium chloride. Therefore, to completely react with the silver, we need half the number of moles of sodium chloride, which is:

moles of sodium chloride = 0.00915 moles / 2 = 0.00458 moles

To convert moles to grams, we use the molar mass of sodium chloride, which is approximately 58.5 g/mol. Thus, the mass of solid sodium chloride needed is:

mass of sodium chloride = moles of sodium chloride * molar mass

= 0.00458 moles * 58.5 g/mol

≈ 0.268 g

Therefore, approximately 0.268 grams of solid sodium chloride must be added to the 25.0 ml 0.366 M aqueous silver nitrate solution to completely react with the silver.

Learn more about solid sodium chloride here:

https://brainly.com/question/11111784

#SPJ11

As of 2007, the maximum efficiency of a multijunction solar cell was 40.7%. Multijunction solar cells are a type of solar cell that has several p-n junctions that help to enhance the efficiency of the cell.

In 2007, the National Renewable Energy Laboratory (NREL) announced that they had achieved a maximum efficiency of 40.7% for a multijunction solar cell. This was achieved by using three different semiconducting layers, each with a different bandgap energy.

The efficiency of these cells has continued to increase, and they are now used in a variety of applications, including space satellites and concentrator photovoltaics. The explanation provided explains the working of the multijunction solar cells and their advantages over the single junction solar cells. The explanation also includes the maximum efficiency of multijunction solar cells and how they are used in different applications.

To know more about multijunction visit:

https://brainly.com/question/1882888

#SPJ11

15 moles of O2 are required to generate 12 moles of SO2 gas. From the balanced chemical equation:

2CuFeS2 + 5O2 → 2Cu + 2FeO + 4SO2

We can see that for every 4 moles of SO2 produced, 5 moles of O2 are required. This is based on the stoichiometric coefficients of the reactants and products in the equation.

Therefore, if we want to generate 12 moles of SO2 gas, we need to determine how many moles of O2 are required.

Using a proportion:

4 moles of SO2 corresponds to 5 moles of O2

12 moles of SO2 corresponds to x moles of O2

We can set up the proportion:

4/5 = 12/x

Cross-multiplying:

4x = 5 * 12

4x = 60

Dividing both sides by 4:

x = 60/4

x = 15

So, 15 moles of O2 are required to generate 12 moles of SO2 gas.

To know more about stoichiometric:

https://brainly.com/question/32088573\

#SPJ4

The frequency factor for this reaction is 1.25 x 10^11 s^-1. The temperature at which the reaction proceeds four times faster than at 460 K is 1031.2 K.

Part 1: The Arrhenius equation is given by k = Ae^(-Ea/RT) where, A is the frequency factor, also known as the pre-exponential factor, Ea is the activation energy, R is the gas constant (8.314 J/mol.K) T is the absolute temperature in Kelvin. The rate constant is given ask = 5.8 x 10^6 sat T = 460 K, Ea = 265 kJ/mol

Substituting the values,k = Ae^(-Ea/RT)5.8 x 10^6 = A exp (-265000/(8.314 x 460))A =

Part 2: We know that the rate constant is proportional to the temperature as per the Arrhenius equation.k1/k2 = exp ((Ea/R)(1/T2 - 1/T1))

Let's assume that the rate constant at T1 (460 K) is k1. We are required to find the temperature at which the rate constant is four times faster, i.e., k2 = 4k1.

The expression for k2/k1 is,k2/k1 = exp((Ea/R)(1/T2 - 1/460))4 = exp((265000/8.314)(1/T2 - 1/460))

Taking the natural logarithm on both sides, ln(4) = (265000/8.314)(1/T2 - 1/460)Solving for T2,T2 = 1031.2 K

Therefore, the temperature at which the reaction proceeds four times faster than at 460 K is 1031.2 K.

More on frequency factor: https://brainly.com/question/27723476

#SPJ11

30.0 mL of 0.050 M Ca(CN)2 are needed to make 25.0 mL of 0.010 M solution. Hence, Volume of 0.050 M solution containing 0.00025 mol of Ca(CN)2= 0.00025 / 0.00125 = 0.2 L or 200 mL.

Molarity of Ca(CN)2 solution = 0.050 M Molarity of solution to be made = 0.010 MVolume of solution to be made = 25.0 mLNumber of moles of Ca(CN)2 in 25.0 mL of 0.010 M solution =0.010 * 25.0 / 1000 = 0.00025 molMolar mass of Ca(CN)2 = 80.11 g/mol

Mass of Ca(CN)2 in 0.00025 mol of Ca(CN)2 = 0.00025 * 80.11 = 0.020 m gNumber of moles of Ca(CN)2 in 0.050 M solution = 0.050 * 25.0 / 1000 = 0.00125 mol Therefore, Volume of 0.050 M solution containing 0.020 mg of Ca(CN)2 = (200/1000) * 0.020 = 0.004 mL or 4.0 mL Therefore, Volume of 0.050 M solution containing 20.0 mg of Ca(CN)2 = (4.0/0.020) * 20.0 = 400.0 mL or 0.400 L.

To know more about solution visit:

https://brainly.com/question/15757469

#SPJ11

In a mixture of noble gases, the gas that will have the greatest partial pressure is Xenon. Mole fraction can be defined as a unit of concentration used in chemistry to measure the amount of one substance in a mixture of substances.

It is equal to the number of moles of a solute divided by the total number of moles of the solution. Therefore, given that in a mixture of noble gases, neon has a mole fraction of 0.5, argon has a mole fraction of 0.3, and xenon has a mole fraction of 0.2. The partial pressure of each gas can be calculated by using Dalton's Law of partial pressures which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas in the mixture.

Partial pressure of each gas can be calculated as follows: PNeon = (0.5) x Ptotal PArgon = (0.3) x Ptotal PXenon = (0.2) x Ptotal, where Ptotal is the total pressure of the mixture. Now, we can see that the partial pressure of Xenon will be the greatest because it has the highest mole fraction and will therefore contribute the most to the total pressure.

To know more about noble gases visit:-

https://brainly.com/question/19024000

#SPJ11

To make 10 ml of 1 mM Tris, 1 mM EDTA from stock solutions containing 1 M Tris and 0.5 M EDTA, the following steps are followed First, we will calculate the volume of the stock solutions required. To make 10 ml of a 1 mM solution, we need to use the formula.

C1 = 1 MTris (concentration of stock solution)V1 = ?C2 = 1 mM (concentration of diluted solution)V2 = 10 ml (volume of diluted solution)Putting these values in the above formula, we get: 1 M x V1 = 1 mM x 10 ml V1 = (1 mM x 10 ml) / 1 M V1 = 0.01 ml (volume of stock solution required)Similarly, for EDTA, we have:C1 = 0.5 M EDTAV1 = ?C2 = 1 mM EDTAV2 = 10 ml (volume of diluted solution)0.5 M x V1 = 1 mM x 10 mlV1 = (1 mM x 10 ml) / 0.5 MV1 = 0.2 ml (volume of stock solution required) .

Add the required volumes of the stock solutions to a 10 ml volumetric flask. Fill the flask with distilled water to the 10 ml mark. Mix the contents well to obtain a homogenous solution.Therefore, 0.01 ml of 1 M Tris and 0.2 ml of 0.5 M EDTA are required to make 10 ml of 1 mM Tris, 1 m M EDTA from stock solutions containing 1 M Tris and 0.5 M EDTA.

To know more about volume visit :

https://brainly.com/question/28058531

#SPJ11

- Oxygen molecules at 25 °C are moving faster than oxygen molecules at 0 °C. - True

- All hydrogen molecules in a sample of hydrogen gas at 25 °C move with the same velocity. - False

- Since nitrogen molecules are heavier than hydrogen molecules, they exert higher pressure than hydrogen molecules. - False

-  When gases collide with container walls, they exert pressure. - True

-  Nitrogen molecules remain suspended in the atmosphere because gravitational forces do not attract them to Earth. - False

- The kinetic energy of gas molecules increases with temperature, so oxygen molecules at 25 °C will have higher average velocities compared to oxygen molecules at 0 °C. Hence, the statement is true.

- In a sample of gas, the individual gas molecules will have a distribution of velocities due to different kinetic energies. Therefore, not all hydrogen molecules in a sample at 25 °C will have the same velocity. The statement is false.

- The pressure exerted by a gas depends on factors such as temperature and the number of gas molecules, not just the molecular weight. So, the statement that nitrogen gas exerts more pressure because nitrogen molecules are heavier is false.

- When gases collide with container walls, they exert pressure. These collisions create a force per unit area, resulting in pressure. Therefore, the statement is true.

- Nitrogen molecules in the atmosphere do experience gravitational forces, and it is gravity that keeps them close to the Earth's surface. The statement that they are not attracted to Earth by gravitational forces is false.

The complete question is:

True / False classify each of the statements about gases as true or false.

- Oxygen molecules at 25 "Care moving faster than oxygen molecules at 0 °C.

- All hydrogen molecules in a sample of hydrogen gas at 25 °C move with the same velocity. - False

- Since nitrogen molecules are heavier than hydrogen molecules, they exert higher pressure than hydrogen molecules. - False

-  When gases collide with container walls, they exert pressure. - True

-  Nitrogen molecules remain suspended in the atmosphere because gravitational forces do not attract them to Earth. - False

Learn more about Nitrogen gas at https://brainly.com/question/15842685

#SPJ11

Given data: Pressure of H2 (g) = 414.0 torr pressure of N2 (g) = 394.9 torr pressure of Ar (g) = 86.1 torrTo find:Mole fraction of each of the given gases :

Mole fraction of any gas can be calculated using the below formula:Xgas = moles of gas / total moles of gasLet's calculate the total pressure of the given gaseous mixture:Ptotal = PH2 + PN2 + PArPtotal = 414.0 torr + 394.9 torr + 86.1 torrPtotal = 895.0 torrThe mole fraction of each gas can be calculated using the formula:Xgas = moles of gas / total moles of gasMoles of H2 (g) = PH2 / Ptotal x total moles of gasMoles of H2 (g) = 414.0 torr / 895.0 torr x nMoles of H2 (g) = 0.463 moles of H2Moles of N2 (g) = PN2 / Ptotal x total moles of gas

Moles of N2 (g) = 394.9 torr / 895.0 torr x nMoles of N2 (g) = 0.441 moles of N2Moles of Ar (g) = PAr / Ptotal x total moles of gasMoles of Ar (g) = 86.1 torr / 895.0 torr x nMoles of Ar (g) = 0.096 moles of ArTherefore, the mole fraction of each of the given gases are as follows:Mole fraction of H2 = 0.463 / (0.463 + 0.441 + 0.096) = 0.412Mole fraction of N2 = 0.441 / (0.463 + 0.441 + 0.096) = 0.394Mole fraction of Ar = 0.096 / (0.463 + 0.441 + 0.096) = 0.194Main answer:Therefore, the mole fraction of each of the given gases are:Mole fraction of H2 (g) = 0.412Mole fraction of N2 (g) = 0.394Mole fraction of Ar (g) = 0.194

To know more about gases visit:

https://brainly.com/question/1369730

#SPJ11

Phenol has the chemical formula C6H5OH. It is a weak acid and when dissolved in water it undergoes an ionization reaction as shown below C6H5OH(aq) + H2O(l) ⇌ H3O+(aq) + C6H5O-(aq).

K a = \[\frac{[H_3O^+][C_6H_5O^-]}{[C_6H_5OH]}\]The Ka for phenol is given as 1.3 × 10−10.Let x be the degree of dissociation of phenol.The initial concentration of phenol is 0.56 M.The concentration of the undissociated phenol is (0.56 - x) M.The concentrations of the H3O+ and C6H5O− ions are each x M. Applying the weak acid equilibrium reaction and Ka expression, we have;Ka = \[\frac{[H_3O^+][C_6H_5O^-]}{[C_6H_5OH]}\]1.3 × 10−10 = \[\frac{x^2}{0.56 - x}\]Since x is very small compared to 0.56,

We can safely assume that 0.56 - x ≈ 0.56.So, 1.3 × 10−10 = x2/0.56x = √(1.3 × 10−10 × 0.56)x = 1.129 × 10−6The percent ionization of phenol is given by;Percent ionization = \[\frac{x}{[C_6H_5OH]}\]Percent ionization = \[\frac{1.129 \times 10^{-6}}{0.56} \times 100\% = 0.000202 \times 100\% = 0.0202\%\]Therefore, the percent ionization of phenol in a 0.56 m aqueous solution is 0.0202%.

To know more about chemical formula visit :

https://brainly.com/question/32018188

#SPJ11

The mass of H2 produced during the complete reaction of the iron bar is 0.114 g. In this given scenario, we will use stoichiometry to calculate the amount of HBr and H2 required to dissolve a 3.2g pure iron bar.

In this given scenario, we will use stoichiometry to calculate the amount of HBr and H2 required to dissolve a 3.2g pure iron bar. The given chemical reaction is:

Fe(s) + 2HBr(aq) → FeBr2(aq) + H2(g)

We have to calculate the mass of HBr needed to dissolve a 3.2g pure iron bar on a padlock. To solve this question, we will use the stoichiometry concept that is the mole concept. We are given the mass of iron, so first, we will calculate the moles of Fe: Fe = 3.2 g / 56 g/mol = 0.057 moles

As per the balanced chemical equation, we need two moles of HBr to react with one mole of Fe. So, the number of moles of HBr required to react with 0.057 moles of Fe is: 2 moles of HBr = 1 mole of Fe

0.057 moles of Fe = 0.057 moles Fe × 2 moles HBr / 1 mole Fe = 0.114 moles HBr

The molar mass of HBr is 80g/mol, so the mass of HBr required is: Mass of HBr = 0.114 moles × 80 g/mol = 9.12 g

Therefore, we need 9.12g of HBr to dissolve a 3.2g pure iron bar on a padlock. Now, we will calculate the mass of H2 that will be produced during the reaction of the iron bar: According to the balanced chemical equation, the number of moles of H2 produced is the same as the number of moles of Fe used. We already calculated the moles of Fe, so the number of moles of H2 produced is:0.057 moles of H2The molar mass of H2 is 2 g/mol, so the mass of H2 produced is: Mass of H2 = 0.057 moles × 2 g/mol = 0.114 g

Therefore, the mass of H2 produced during the complete reaction of the iron bar is 0.114 g.

To know more about stoichiometry visit: https://brainly.com/question/28780091

#SPJ11

The correct match of each five-electron group designation to the molecular shape is given below: Five electron group designation are linear trigonal planar tetrahedral trigonal bipyramidal and octahedral.

Molecular Shape:-Linear - This electronic geometry is determined when there are two bonds and no lone pair of electrons around the central atom. Example: CO2Trigonal planar - When a central atom is surrounded by three atoms and no lone pair, the geometry is trigonal planar.

Tetrahedral - The electronic geometry is determined by four bonds and no lone pair of electrons around the central atom. Example: CH4.Trigonal bipyramidal - A central atom surrounded by five atoms or ligands is in the shape of a trigonal bipyramid. Example: PCl5Octahedral - When a central atom is surrounded by six atoms or ligands and is in the shape of an octahedron, the electronic geometry is octahedral.

To know more about electron visit:

https://brainly.com/question/18367541

#SPJ11

a) The pH of the solution is 11.64 at 4.0 ml of added acid. b) The pH of the solution after adding 5.0 mL of acid beyond the equivalence point is 3.89.

a) The balanced chemical equation for the titration of CH₃NH₂CH₃NH₂ with HBr is given as follows: CH₃NH₂+HBr⟶ CH₃NH₃+Br⁻​

The initial concentration of CH₃NH₂CH₃NH₂ is 0.180 MM. Let the concentration of HBr be x. At equilibrium, the concentration of CH₃NH₃+ is equal to that of Br⁻.4.4×10⁻⁴​ ​=[CH₃NH₃⁺][OH⁻​][CH₃NH₂]​Since the solution contains a weak base and a strong acid, the pH of the solution will be less than 7. Thus, we will need to calculate the concentration of H+ at the equivalence point. Let us define x as the concentration of HBr.

x mol dm−3​H +CH₃NH₂CH₃NH₂ → CH₃NH₃ + H₂OH+initial 0.000000.1800change-x-x+x+xend(0.155-x)(0.180+x)(x)​[OH⁻]=4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂][OH⁻]=4.4×10⁻⁴​

​[CH₃NH₂CH₃NH₂][OH⁻]=[H⁺][OH⁻]Kw=1.0×10⁻¹⁴​

Kw=1.0×10−14[H⁺][OH⁻]=1.0×10¹⁴[H⁺][4.4×10⁻⁴​

​[CH₃NH₂CH₃NH₂]]=[1.0×10⁻¹⁴]4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂][H⁺]=1.0×10−14​/4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂][H⁺]=2.3×10⁻¹¹[OH⁻]=4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂]pOH=−log10​[OH⁻]pOH=−log10​(4.4×10⁻⁴​[CH₃NH₂CH₃NH₂])=2.36, pH=14−pOH

pH=14−2.36=11.64​

The pH of the solution is 11.64 at 4.0 mL of added acid.

b) The pH at one-half of the equivalence point can be calculated using the equation : pH=pKa+log10​([A−][HA])=4.4×10⁻⁴​​+log10​[(0.155/2)/0.180/2]pH=4.4×10⁻⁴​+log10​(0.4306)=3.51c) The pH at the equivalence point can be calculated as follows:

[OH⁻]=4.4×10⁻⁴​ ​[CH₃NH₂CH₃NH₂][H⁺][OH⁻]=[H⁺][OH⁻]=Kw=1.0×10⁻¹⁴[H⁺][OH−]=[1.0×10⁻¹⁴][4.4×10⁻⁴​​[CH₃NH₂CH₃NH₂]]=[4.4×10⁻⁴​[CH₃NH₂CH₃NH₂]]/[H⁺][H⁺]=[4.4×10⁻⁴​[CH₃NH₂CH₃NH₂]]/[4.4×10⁻⁴[CH₃NH₂CH₃NH₂]]=1[H⁺]=1.0×10⁻⁷  pH=7.0

The pH at the equivalence point is 7.0.After adding 5.0 mL of acid beyond the equivalence point, the solution contains an excess of H⁺. We can use the following equation to calculate the pH:

pH=pKa+log10​([A⁻]/[HA])=4.4×10⁻⁴​+log10​[(0.155−0.115)/(0.180−0.115)]pH=4.4×10⁻⁴​+log10​(0.7722)=3.89

Thus, the pH of the solution after adding 5.0 mL of acid beyond the equivalence point is 3.89.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

To draw the Lewis structure of a molecule, Calculate the total number of valence electrons in the molecule. Determine the central atom by considering the atom with the highest bonding capacity.

A Lewis structure is a structural representation of a molecule in which bonding electrons and non-bonding electrons are shown in order to predict the geometry and properties of the molecule. Distribute the remaining electrons among the peripheral atoms in the form of lone pairs, where each bond (single, double, or triple bond) is composed of two electrons and each lone pair is composed of two electrons.

The shape of the BrCl3 molecule is T-shaped. The shape of the BrCl3 molecule is determined by the number of lone pairs and the number of atoms around the central atom. In BrCl3, the central atom Br has three Cl atoms and two lone pairs around it. The two lone pairs take up more space than the three Cl atoms. This results in a T-shaped structure.

To know more about molecule visit:

https://brainly.com/question/32298217

#SPJ11

None of the options increase the solubility of a gas in a liquid. In certain cases, such as with ideal solutions or dilute solutions, the solubility of gases may remain constant regardless of temperature. The correct answer is "None of the above."

This occurs when the enthalpy change associated with the dissolution of the gas is approximately balanced by the enthalpy change associated with the expansion of the solvent. Consequently, changes in temperature do not result in noticeable changes in gas solubility.

Therefore, in this context, none of the options (decreased temperature, constant temperature, increased temperature) increase the solubility of a gas in a liquid, the correct answer is "None of the above."

To know more about solubility of a gas, refer to the link:

https://brainly.com/question/14396373#

#SPJ11