Can someone answer please

When two particles, groups of particles, or solid objects move in the same direction and get close enough to each other to interact, they collide.

Even though the particles are travelling swiftly in all directions, collisions between them occur more frequently than in gases because of the closer proximity of the particles.

The equation relating velocity and radius is [tex]= \omega =\frac{v}{r}[/tex]

Because the equation can also be used to determine angular velocity

[tex]\omega = 2 \pi[/tex]f we can set the equations equal and solve for the velocity.

[tex]\frac{v}{r} = 2 \pi f[/tex]

[tex]v= 2 \pi f r[/tex]

Since we are given the radius of  [tex]5000 m[/tex] And the frequency of [tex]2Hz[/tex], we can calculate the velocity. (Frequency can be found by the number of times an object travels around a full circle in one second).

[tex]V = 2 \pi (2hz) ( 5000 m) = 2 \pi \times 10^4\frac{m}{s}[/tex]

As an alternative, we can calculate the collider's circumference using its radius.

[tex]C = 2\pi r = 2\pi 5000= 10000\pi[/tex]

Every second, the particle does two full rotations.

[tex]v = \frac{d}{t} = \frac{2(10000\pi )m10^4\frac{}{}}{1s}= 2\pi\times 10^4 \frac{m}{s}[/tex]

Therefore, [tex]2\pi\times 10^4 \frac{m}{s}[/tex]  is the velocity of particle while travelling.

Learn more about collision here:

https://brainly.com/question/15535783

#SPJ4

From the information provided,  each christmas tree bulb has a resistance of approximately 257.4 Ω.

To determine the resistance of each bulb, we first need to find the total resistance of the circuit. We can use Ohm's law to do this:

V = IR

where V is the voltage (120 V), I is the current, and R is the total resistance. Since the lights are connected in series, the current is the same through each bulb. We can use the power of each bulb (7 W) and the voltage to find the current:

P = IV

I = P/V = 7 W / 120 V = 0.0583 A

Now we can use Ohm's law to find the total resistance:

R = V/I = 120 V / 0.0583 A = 2059.5 Ω

Since there are eight bulbs, each bulb has the same resistance. We can find the resistance of each bulb by dividing the total resistance by the number of bulbs:

R_each = R_total / number of bulbs = 2059.5 Ω / 8 = 257.4 Ω

Learn more about resistance here: brainly.com/question/17563681

#SPJ4

When a body is entirely or partially submerged in a liquid, the resultant pressure force acting on the body is known as the buoyant force.

When a surface is immersed in a fluid, the pressure force that results on the body operates in all directions perpendicular to the surface. We refer to this as hydrostatic pressure. The density of the fluid and the depth of the point below the surface of the fluid both directly affect the pressure at a given place in the fluid, which is the same in all directions. The pressure also rises as the depth does buoyant force. Any point in a fluid experiences pressure in all directions, making it a scalar quantity.

The weight of the fluid above the point of interest determines this pressure, which is described as the force applied per unit area. It is referred to be an isotropic quality of fluid when the pressure at a particular place in the fluid is the same in all directions.

Learn more about buoyant force here

https://brainly.com/question/28526066

#SPJ4

The range of the wavelengths for the sound over the audible range of frequencies in room temperature is from 24 meters to 18×10⁻³ meters.

The relation between velocity , wavelength and frequency of a sound is given by the following equation :

⇒ V = λ x ν        where, V stands for the velocity of the sound, λ stands for the wavelength, and ν stands for frequency of the sound. To find wavelength, we have to put ν on the left side of the equation which gives us :

λ = V/ν

Velocity of the sound at room temperature ≈ 360m/s

For 15 hertz, Wavelength =  V/ν

= 360/15

=24 meters

For 20,000 hertz, Wavelength = V/ν

= 360/20000

=18×10⁻³ meters

Therefore, the audible range of wavelengths is from 24 meters to 18×10⁻³ meters.

Learn more about Sound waves here,

https://brainly.com/question/15085890

#SPJ4

The formula below demonstrates how the mass of an item multiplied by its acceleration determines the size of the net force acting on it. When there is no net force acting on an object, it is in a condition known as equilibrium and is not moving forward.

Magnitude is the term used to describe a quantity's numerical value, which provides information on the strength of that quantity. As a result, the strength of a force is expressed by its magnitude.

When two forces of equal size are working in opposite directions—one in the east and the other in the west—the results of the two forces are not the same. Hence, both magnitude and direction must be provided in order to accurately characterize a force.

Therefore, [tex]F_n = 183.3 N[/tex]  is the magnitude of the total force (in n) acting on the smiley face.

Learn more about magnitude here:

https://brainly.com/question/14452091

#SPJ4

Over the course of a single night, the position of mars in its home constellation do not change dramatically. Correct answer us no.

The position of Mars in its home constellation changes over the course of a single night, but not dramatically. Mars, like all celestial objects, appears to move across the night sky due to the rotation of the Earth.

However, the magnitude of this change in position over the course of a single night is not usually considered to be "dramatic" in astronomical terms. The apparent motion of Mars across the night sky is relatively slow, and its position relative to the surrounding stars may only change by a few degrees over the course of several hours.

To know more about the constellations, here

brainly.com/question/3727286

#SPJ4

The average torque exerted on the wheel as it slows down has a magnitude of -1.0 Nm.

In this case, the average torque has magnitude T = Iα, where I is the rotational inertia of the wheel and α is the angular acceleration. Using the rotational kinematics equation ωf = ωi + αt, we can calculate the angular acceleration:
α = (ωf - ωi) / t
where ωf is the final angular speed, ωi is the initial angular speed, and t is the time. In this case, ωf = 0, ωi = 3.0 rad/s, and t = 6.0 s, so the angular acceleration is α = -0.5 rad/s2. Plugging this value into the equation for torque, we get

T = 2.0 kg.m2 x (-0.5 rad/s2) = -1.0 Nm.

The negative sign is showing torque is in the opposite direction of the initial angular velocity.  

You can learn more about torque at: brainly.com/question/29024338

#SPJ11

V=3.39×10⁶ ×d for 0≤d≤0.005 m, 7.73x10⁷ m/s is the electric potential at a location 8.0mm from the negative plate, 3.0mm from the positive plate

a. Identify the unknown:

The potential everywhere

List the Knowns:

Charge density of the two plates: σ = ±30×10⁻⁶ C/m²

Distance between the two plates: d=5×10⁻³  m

Permittivity of free space: ε₀=8.85×10⁻¹² C²/N⋅m²

Set Up the Problem:

Since the σ are equal and opposite, this means that in the region outside of the two plates, the electric fields cancel each other out to zero: E = 0 The electric field between the plates is this strong:

E = σ/ε₀ = 30×10⁻⁶/8.85×10⁻¹² = 3.39x10⁶N/C

Possible variations between the positive plate and the negative plate include:

ΔV=Ed=3.39×10⁶ ×0.005=1.7×10⁴ V

Assuming the negatively charged plate is at the origin (d=0) and has no potential, the electric field is directed away from the positively charged plate and towards the negatively charged plate, the positive plate is at (d=+0.005 m) and have 1.7×10⁴ V

Solve the Problem:

V=0 for d<0

V=3.39×10⁶×d for 0≤d≤0.005 m

V=1.7×10⁴ V for d>0.005m

b. Identify the unknown:

when an electron leaves a state of rest at the negative plate and strikes the positive plate, how quickly it moves

List the Knowns:

Electron charge: e=1.6×10⁻¹⁹ C

Electron mass: m=9.11×10⁻³¹ kg

Set Up the Problem:

Potential and electric potential energy have the following relationships: = U/q

U=qV

To move the drop, this potential energy is converted to kinetic energy:

1/2mv²=qV

v = √2qV/m

Solve the Problem:

v = √(2×1.6×10⁻¹⁹×1.7×10⁴/9.11×10⁻³¹) = 7.73x10⁷ m/s

Learn more about Electric potential here:

https://brainly.com/question/12645463

#SPJ4

The detailed answer of this question is given below:

The furnace is an  internal                  combustion engine.

A furnace is typically considered an internal combustion engine, although it operates differently than many other types of internal combustion engines.

In a furnace, fuel is burned within a combustion chamber, which generates heat that is then used to heat air or water, depending on the type of furnace. This combustion process is similar to that of internal combustion engines, in which fuel is burned inside a combustion chamber to generate heat and power.

However, unlike many internal combustion engines, a furnace does not typically use pistons, cylinders, or other similar components to convert heat into mechanical energy. Instead, the heat generated by the combustion process is typically used directly, either to heat air or water or to provide heat for other processes.

To know more about Combustion Engine visit:

https://brainly.com/question/16579482

#SPJ4

Standing waves are most often caused by the resonance phenomenon, which happens when waves are reflected back and forth at the resonator's resonant frequency and interfere, causing standing waves to form inside the resonator.

The observed wave pattern contains points that appear to be standing still, which is why the pattern is typically referred to as a standing wave pattern.

Such patterns can only be produced by specific vibrational frequencies within the medium. The term "harmonics" or "only harmonics" is used to describe these frequencies.

A reflective boundary of some kind is required for a standing wave to form. The shape is then affected by the wave's frequency, the waveguide's length, and the boundary's acoustic impedance.

Therefore, standing wave pattern change.

Learn more about standing wave here:

https://brainly.com/question/28191139

#SPJ4

The goose will take 8.55 hours to travel 550 km at their average speed of 64.3km/h.

The goose average speed is around 40 mph or 64.3 km/h, but in good weather and wind conditions this speed can go up to 70 mph or 112 km/h

Considering the formula:

x = v.t

were x=space, v=speed and t= time. Clearing the equation, to find the hours of flight:

t = x/v = 550km / 64.3km/h = 8.55 hours

Average speed is a useful concept in many fields, including physics, engineering, and transportation. It can be used to calculate travel times, estimate fuel consumption, and analyze the performance of machines and vehicles. However, it is important to note that average speed does not take into account changes in direction or acceleration, which can affect the overall performance of an object.

Average speed is a measure of how quickly an object moves over a certain distance. It is defined as the total distance traveled divided by the time it takes to travel that distance. The units of average speed are usually expressed as distance per unit time, such as kilometers per hour, miles per hour, or meters per second.

To learn more about Average speed visit here:

brainly.com/question/1727745

#SPJ4

It is true that the maximum speed of a block in a trajectory occurs at its maximum height, where the vertical component of the velocity is zero. This is due to the fact that at that point, the kinetic energy is minimized and the acceleration is zero. At this point, the block is at its highest point, and the velocity of the block is at its lowest. Therefore, the speed is zero at the top of the trajectory.

However, the horizontal component of the velocity is not zero at the maximum height. This is because the block is constantly subject to horizontal acceleration by gravity, even at its highest point. This means that the block has a nonzero velocity in the horizontal direction, even if it is at its maximum height. Therefore, the block is not at rest at the highest point; it is just moving horizontally at a constant speed.

Your logical hypothesis is now subjected to methodical testing to support or refute the assumption. There are a number of factors that can affect an empirical hypothesis, causing modifications and leading to certain results.

The approach uses sample data. Data collection: We take a representative sample of the population. Making a Decision: We contrast the sample results with the population-based hypothesis.

In most cases, we contrast the estimated value of the population parameter with the value of a statistic calculated from the sample data.

A statement that can be supported by observations or tests concerning the natural world is called a hypothesis. Hypotheses must be falsifiable—that is, they must be formulated in a fashion that allows them to be disproven—and be evaluated scientifically in order to be considered to be true.

Therefore, while a theory is a group of closely related phenomena or observations, A testable hypothesis is a logical proposition.

Learn more about hypothesis here:

https://brainly.com/question/29519577

#SPJ4

There are four Grand Slam tournaments in professional tennis each year: the Australian Open, the French Open, Wimbledon, and the US Open.

option D.

The Grand Slam tournaments are the most prestigious events in professional tennis and are held annually.

The four tournaments that make up the Grand Slam are;

These four tournaments are considered the most prestigious events in the sport and are held annually.

Learn more about Grand Slam tournaments here: https://brainly.com/question/18076273

#SPJ1

(a) The acceleration of the crate  is  1.5 m/s^2

(b) The crate’s final velocity is 9 m/s.

To move the crate with a constant velocity, the force you apply must equal the force of friction. So, to move the crate, you must push with a force of 275 N.

If you push with a force of 380 N, the net force on the crate will be;

F (net)  380 N - 275 N = 105 N.

The acceleration of the crate will be given by Newton's second law of motion:

a = F / m

where;

So, substituting in the known values, we get:

a = 105 N / 70 kg = 1.5 m/s^2

Finally, if the crate started from rest, its final velocity after 6 seconds can be found using the equation:

v = at

v = 1.5 m/s^2  x  6s = 9 m/s

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

Only II and III should be regarded as closed thermodynamic systems, which implies that the wire heats up as current flows through it and the light bulb emits light.

When a capacitor is added to a circuit that also includes a light bulb and a battery, the capacitor will initially charge up and the circuit will have a nonzero current while this charging is taking place, causing the light bulb to illuminate.

After passing through a device like a lamp, the electricity is released through a wire or another conductor.

To learn more about electric circuit visit:

brainly.com/question/29761561

#SPJ1

A negative slope's graph slopes downhill from left to right. When viewing a graph on a xy coordinate plane, the slope is negative because as x rises, y falls.

The line is sloped downhill from left to right when there is a negative slope. Here, the inverse link between the two variables depicted along the x- and y-axes of the negative slope graph applies. The other variable decreases when the first variable goes up.

Negative values are below the origin on the y-axis and to the left of the origin on the x-axis. If the x-value is negative, begin at the origin and go to the left. In the event that the y-coordinate is negative, descend.

A line that slopes positively ascends from left to right. Remember that a line with a negative slope descends from left to right.

Therefore, Graph below the x axis and in the negative downward slope direction.

Learn more about Graph here:

https://brainly.com/question/1463001

#SPJ4

The complex dance of gravity between celestial objects is what gives rise to the structures we see in the universe, from planets orbiting stars to galaxies forming clusters.

Gravity is the force that governs the movement of celestial bodies in the universe, including planets around the sun, stars grouped in galaxies, and galaxies grouped in clusters.

For example, the gravity of the sun keeps the planets in orbit around it. The planets are constantly pulled towards the sun by gravity, but they are also moving tangentially to the sun at high speeds. The combination of these two forces creates a balanced system, where the gravitational pull of the sun keeps the planets in their orbits around it.

Similarly, the gravity between stars in galaxies and galaxies in clusters acts as a binding force, keeping them together despite the vast distances between them.

To know more about the gravity, here

brainly.com/question/21454806

#SPJ4

Three cars are coming up to an uncontrolled intersection. Across from Car B at the intersection, Car A wants to turn left. According to the legislation, Vehicle B has the right-of-way.

Right-of-Way Rules:

Intersections:

Three cars are coming up to an uncontrolled intersection. Across from Car B at the intersection, Car A wants to turn left.

Thus, according to the legislation, CAR B has the right-of-way.

To know more about the rules and law of roads, here

https://brainly.com/question/28151562

#SPJ1

The complete question is-

Three vehicles approach an uncontrolled intersection. Car A wants to make a left turn and is across the intersection from Car B. Car B is ahead of Car C and both are in the same lane traveling in the same direction and want to proceed straight through the intersection. The law gives the right-of-way:

To Car A Only.

To Car A and Then Car B.

To Car B and then Car A.

To Car B.

Heat transfer by conduction occurs when large numbers of atoms move from place to place.

Conduction is the transfer of heat through a material by the movement of molecules or electrons from a region of higher temperature to a region of lower temperature. In this process, heat energy is transferred from one molecule to another through molecular collisions. This transfer of energy continues until thermal equilibrium is reached, i.e., when the temperature is the same throughout the material.

Electromagnetic waves traveling from one place to another through a vacuum is an example of heat transfer by radiation. Electrons bumping into atoms and other electrons is an example of heat transfer by convection. Atoms giving off heat in the form of electromagnetic waves is an example of heat transfer by radiation.

For more such questions Heat transfer

https://brainly.com/question/16055406

#SPJ4

An airplane flies 170km in 15 min  in the given case.

To find the average speed, we divide the total distance by the time taken:

Average. speed = Total distance / Time taken

In this case, the total distance is 170 km and the time taken is 15 min. However, it's more common to express speed in km/hr, so we need to convert 15 min to hours:

15 min = 15/60 = 0.25 hours

Now we can calculate the average speed:

Avg. speed = 170 km / 0.25 hours = 680 km/hr

Therefore, the average speed of the airplane is 680 km/hr.

Q1b. Sarah rides her horse with a constant speed of 20 km/hr. How far can she travel in 4 hours?

To find the distance Sarah can travel in 4 hours, we multiply her speed by the time:

Distance = Speed x Time

In this case, Sarah's speed is 20 km/hr and the time is 4 hours, so:

Distance = 20 km/hr x 4 hours = 80 km

Therefore, Sarah can travel 80 km in 4 hours on her horse.

Q2a. An airplane flies at a constant speed of 780 miles per hour. How long will it take to travel a distance of 2635 miles?

To find the time it takes the airplane to travel a distance of 2635 miles, we divide the distance by the speed:

Time = Distance / Speed

In this case, the distance is 2635 miles and the speed is 780 miles per hour, so:

Time = 2635 miles / 780 miles per hour ≈ 3.38 hours

Therefore, it will take the airplane approximately 3.38 hours to travel a distance of 2635 miles at a constant speed of 780 miles per hour.

Q2b. An airplane flies at a constant speed of 540 miles per hour. How long will it take to travel a distance of 2160 miles?

To find the time it takes the airplane to travel a distance of 2160 miles, we divide the distance by the speed:

Time = Distance / Speed

In this case, the distance is 2160 miles and the speed is 540 miles per hour, so:

Time = 2160 miles / 540 miles per hour = 4 hours

Therefore, it will take the airplane 4 hours to travel a distance of 2160 miles at a constant speed of 540 miles per hour.

To know more about average speed, visit:

brainly.com/question/12322912

#SPJ1

The geographic north pole is not shown by a magnetic compass. The earth's magnetic poles, which are distinct from the planet's geographic poles, are shown by a magnetic compass.

A magnet will always point northward or southward. A magnet's north pole will always point in the direction of the Earth's geographic north (which is also its magnetic south pole).

Since opposite poles pull together, the earth's magnetic north pole is actually located on the Southern Hemisphere, making it operate like a physical magnet.

The direction of magnetic field lines is set up so that they come out of the north pole of the magnet and go in through the south pole.

Therefore, the magnetic pole that is closest to the geographic north pole of the earth is the south magnetic pole. The law of attraction applies to magnets.

Learn more about magnetic pole here:

https://brainly.com/question/3003721

#SPJ4

The evolution that is shown in the picture that we have here is the evolution of humans from Chimpanzees.

Evolution is the process by which species of living organisms change over generations through a combination of genetic variation, mutation, natural selection, and genetic drift. The theory of evolution explains how species have changed over time to become the diverse forms that exist today, and provides a scientific explanation for the relatedness of different species.

The evidence in the picture tells us that came to be through mutations and generic drift from the Chimpanzee.

An example of evolution would be: evidence that is gotten from fossils.

Read more on evolution here:https://brainly.com/question/27748371

#SPJ1

True. A gamma ray has a very short wavelength and high energy, and can ionize atoms by knocking off electrons from their outer shells.

define wavelength ?

Wavelength is the distance between two successive crests or troughs of a wave, or equivalently, the distance traveled by a wave during one complete cycle. It is usually denoted by the Greek letter lambda (λ) and is typically measured in units of length, such as meters or centimeters.

Wavelength is a physical property of waves, such as light waves, sound waves, and water waves. It is defined as the distance between two consecutive points in a wave that are in phase and have the same amplitude and direction of motion. In other words, it is the distance over which the wave's shape repeats.

For example, in a water wave, the wavelength is the distance between two consecutive wave crests or troughs. In a light wave, it is the distance between two consecutive peaks or valleys of the electromagnetic field.

Wavelength is usually measured in meters or other units of length, depending on the type of wave. It is an important characteristic of waves because it is related to other properties, such as frequency and energy. For example, waves with shorter wavelengths have higher frequencies and more energy, while waves with longer wavelengths have lower frequencies and less energy.

To learn more about wavelength follow the given link: https://brainly.com/question/24452579

#SPJ4

Therefore, the answer to this question is that it cannot be determined without more information.

The answer to this question can be determined by comparing the velocity of the two objects.

The formula for momentum is:

We can rearrange this formula to solve for velocity:

We can plug in the given values:

For the other object, we do not have enough information to determine its velocity. We would need to know its mass and momentum in order to calculate its velocity and compare it to the horse's velocity. Without this information, we cannot determine which object is moving faster. Therefore, the answer to this question is that it cannot be determined without more information.

Learn More About Momentum at https://brainly.com/question/1042017

#SPJ11

Answer:

it is elastic potential energy

Explanation:

V=3.39×10⁶ ×d for 0≤d≤0.005 m, 7.73x10⁷ m/s is the electric potential at a location 8.0mm from the negative plate, 3.0mm from the positive plate

a. Identify the unknown:

The potential everywhere

List the Knowns:

Charge density of the two plates: σ = ±30×10⁻⁶ C/m²

Distance between the two plates: d=5×10⁻³  m

Permittivity of free space: ε₀=8.85×10⁻¹² C²/N⋅m²

Set Up the Problem:

Since the σ are equal and opposite, this means that in the region outside of the two plates, the electric fields cancel each other out to zero: E = 0 The electric field between the plates is this strong:

E = σ/ε₀ = 30×10⁻⁶/8.85×10⁻¹² = 3.39x10⁶N/C

Possible variations between the positive plate and the negative plate include:

ΔV=Ed=3.39×10⁶ ×0.005=1.7×10⁴ V

Assuming the negatively charged plate is at the origin (d=0) and has no potential, the electric field is directed away from the positively charged plate and towards the negatively charged plate, the positive plate is at (d=+0.005 m) and have 1.7×10⁴ V

Solve the Problem:

V=0 for d<0

V=3.39×10⁶×d for 0≤d≤0.005 m

V=1.7×10⁴ V for d>0.005m

b. Identify the unknown:

when an electron leaves a state of rest at the negative plate and strikes the positive plate, how quickly it moves

List the Knowns:

Electron charge: e=1.6×10⁻¹⁹ C

Electron mass: m=9.11×10⁻³¹ kg

Set Up the Problem:

Potential and electric potential energy have the following relationships: = U/q

U=qV

To move the drop, this potential energy is converted to kinetic energy:

1/2mv²=qV

v = √2qV/m

Solve the Problem:

v = √(2×1.6×10⁻¹⁹×1.7×10⁴/9.11×10⁻³¹) = 7.73x10⁷ m/s

Learn more about Electric potential here:

https://brainly.com/question/12645463

#SPJ4

The following are incorrect estimates of Earth's distance to the Sun:

Revolution is the name for the earth's fixed orbital motion around the sun.

The Sun's gravitational force causes the Earth to revolve, creating an elliptical orbit.

Thus, the following are incorrect estimates of Earth's distance to the Sun:

To know more about the revolution of earth, here

https://brainly.com/question/30337265

#SPJ1

Greetings from Joint Base Lewis-McChord, the base where I Corps and the 62 Airlift Wing are based. The flagship military facility on the West Coast for the Department of Defence is Joint Base Lewis-McChord, which is situated in the Puget Sound area of the Pacific Northwest.

JBLM, the sole Army Power Projection Platform west of the Rocky Mountains, has since expanded to become the largest Army-led joint post in the United States.

Because of the 100 km/h speed, the net spirit of the plane will be in this activity. In order to determine the plane's motion with respect to the north, we first locate the theatre.

The calculation would be 100 km/h divided by 300 km/h. According to the formula, three would win 10 thetas.

Therefore, The plane's motion's angle determines whether it is respectable.

Learn more about joint base here:

https://brainly.com/question/28923086

SPJ1

A collision occurs between two 60 kg people. At impact, the car was moving at a 15 m/s rate. The net force on the person if they are buckled in and the airbag deploys is 2.3*10³N.

A) Average force = ma

      = m* v²/2s

      = 60*15² /(2*1)

      = 6750 N

In two significant Figure F = 6.8*10³ N

B)  Average Force = ma = mv²/2s

      = 60*15² /(2*0.005)

     = 1350000 N

In two significant Figure F = 1.4*10⁶ N

C) Fnet/W =6750/(60*9.8) =  11

D) Fnet/W = 1350000/(60*9.8) = 2.3*10³ N

Force is a physical quantity that describes the interaction between two objects. It is defined as the push or pull that one object exerts on another object. Force is a vector quantity, meaning it has both magnitude and direction. The unit of force is Newton, which is defined as the amount of force required to accelerate a one-kilogram mass at a rate of one meter per second squared.

Forces can be categorized into different types, including contact forces such as friction and tension, and non-contact forces such as gravity and electromagnetism. The net force on an object determines its acceleration according to Newton's second law of motion, which states that the acceleration of an object is directly proportional to the net force applied and inversely proportional to its mass.

Learn more about Force here:

https://brainly.com/question/30337818

#SPJ4