Polynomials can be classified based on the number of terms is contains which may be monomial, binomial, or trinomial.
What are polynomials?Polynomials are algebraic expressions that contains a constant that is multiplied by one or more variables.
Monomials is a type of polynomial that has only one term. From the question, the monomial is 10xyz^3.Binomial is a type of polynomial that has only two terms. From the question, the binomial are 8x^2+0.25 and -x^2y^2+2y.Trinomial is a type of polynomial that has only three temrs. From the question, the trinomial are -2x^2-x+3.5 and x^3y^4+2x^2y-3z.Learn more about polynomials here:
https://brainly.com/question/5659345
#SPJ1
The complete question:
Classify each polynomials based on the number of terms it contains.
-2x^2-x+3.5
10xyz^3
-x^2y^2+2y
8x^2+0.25
x^3y^4+2x^2y-3z
Newton's reformulation of kepler's third law allows us to measure the masses of bodies in orbit around each other, if we can measure?
Newton's reformulation of kepler's third law allows us to measure the masses of bodies in orbit around each other, if we can measure the distances and periods of revolution
Isaac Newton made a reformulation of the 3rd law of Kepler with regards to the orbital periods of a planet and this helped to measure the masses of bodies in orbit around each other, if we can measure the distances and periods of revolution
What is kepler's third law?This refers to the law of physics that states that the square of the orbital periods of a planet is directly proportional to the cube of the semi-major axis of its orbit
Hence, there was a reformulation of the 3rd law of Kepler by Isaac Newton with regards to the orbital periods of a planet and this helped to measure the masses of bodies in orbit around each other, if we can measure the distances and periods of revolution
This shows that the distances and periods of revolution are key aspects to neasyre the masses of bodies in orbit around each other,
Read more about kepler's third law here:
https://brainly.com/question/15691974
#SPJ1
The overall dimming of starlight passing through dust clouds is called?
The overall dimming of starlight passing through dust clouds is Extinction .
To find the answer, we need to know more about the Extinction.
What is Extinction ?Extinction is the electromagnetic radiation that is absorbed and scattered by gas and dust between an emitting astronomical object and the observer. Robert Julius Trumpler first identified interstellar extinction around 1930. However, Friedrich Georg Wilhelm von Struve had identified its effects in 1847, and a number of people had seen its impact on star colors but had not made the connection between it and the general abundance of galactic dust. Extinction in the visual band of frequencies (photometric system) for stars in the Milky Way plane and within a few thousand parsecs of the Earth is approximately 1.8 magnitudes per kiloparsec.Thus, we can conclude that, the overall dimming of starlight passing through dust clouds is Extinction .
Learn more about the Extinction here:
https://brainly.com/question/16696255
#SPJ4
The strip of the sky through which the sun, the moon, and the bright planets appear to move in the course of a year is called:_______.
Answer:
Milky way galaxy
Explanation:
This is where the sun is the main star whereby the other planets and stars revolve around it in a cycle
What is the maximum number of grams of fat recommended on a 2000-kcalorie diet based on the daily value?
a. 34
b. 45
c. 78
d. 56
e. 67
The maximum number of grams of fat recommended on a 2000-kcalorie diet based on the daily value is around 65 grams,therefore option (e)
The term "daily value" (DV) describes how much of a nutrient you should eat daily based on a diet of 2,000 calories.On the FDA website, you may obtain the daily values for a variety of nutrients. In order to meet the average adult's energy requirements, the FDA picked 2,000 calories.Fat intake must be kept to a minimum. A 2,000 calorie diet per day should contain no more than 65 grammes of total fat, 20 grammes or less of saturated fat, and trace levels of trans fat. Trans fats are bad because they narrow our arteries, increasing our risk of coronary heart disease.Learn more about daily value from here:https://brainly.com/question/23095932
#SPJ4
I have provided a picture of the question
Answer:
7.8 x 10^18 electrons
Explanation:
1 Coulomb is 6.24 x10^18 charges multiply this by 1.25 to get the answer above
The two articles you just read contain conflicting conclusions. What questions do you have about the information
presented in the articles? Maybe there's something you would like to know more about before making your own
conclusion. Or perhaps there's an item that was presented as a fact that you would like to investigate. Before you
make your conclusion about human involvement in climate change, list four to five questions that you would like
answered.
The five questions that I would like to be answered concerning human involvement in climate change would be disclosed below.
What is climate change?Climate change is defined as the change that affects the normal atmospheric patterns which is often related to the activities of the human and their environment.
The five questions that I would like to be answered concerning human involvement in climate change include the following:
Is climate change caused by humans? What are the main threats of climate change? How is climate change affecting animals? How is climate change affecting people? How is climate change affecting the ocean?From the definition, climate changes with respect to the activities of human beings. Such activities include the following:
Burning fossil fuels, cutting down forests,Fertilisers containing nitrogen,Fluorinated gases, andIncreased farming of livestock.Learn more about climate change here:
https://brainly.com/question/1789619
#SPJ1
If a radioactive decay produced 2. 05 × 1011 j of energy, how much mass was lost in the reaction?
The mass lost in the reaction is 0.227 × [tex]10^{-5}[/tex] Kg
The energy that is released during a nuclear reaction can be related to the mass lost using the Einstein equation.
E = m[tex]c^{2}[/tex] by Einstein demonstrates that matter and energy are only two different manifestations of the same thing. It also demonstrates how much energy (E) can fit into a relatively small mass (m) of matter. Nuclear processes convert matter into energy, yet the combined amount of mass and energy remains constant.
Given that;
E = Δ[tex]mc^{2}[/tex]
Δm = [tex]\frac{ E}{c^{2} }[/tex]
Δm = 2. 05 × 10^11 J/( 3 × 10^8)^2
Δm = 0.227 × [tex]10^{-5}[/tex] Kg
Learn more about Einstein's equation:
https://brainly.com/question/10809666
#SPJ4
What is the molar concentration of a 300.0 ml solution containing 5.00 g of nh3?
The molar concentration of a 300.0 ml solution containing 5.00 g of NH3 will be 0.98 mol/L
Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution.
A mole is defined as the amount of a substance that contains exactly 6.02214076 X1023 elementary entities of the given substance. Thus, a mole of a substance is referred to as the mass of a substance containing the same number of fundamental units as atoms in exactly 12.000 g of 12C.
1 mol of NH3 has a mass of 17 g
Moles of NH3 = 5 g of NH3 * (1 mol of NH3 / 17 g of NH3)
= 0.294 mol of NH3
Litres of solution = 300 mL solution ×( 1 L solution/1000mL sol)
= 0.300 L of solution
Molarity = moles of solute / litres of solution
= 0.294 / 0.300 = 0.98 mol/L
To learn more about molarity here
https://brainly.com/question/8732513
#SPJ4
Assuming a mass of 0.04-g, what is the power exerted by the electrical forces on a fragment of fiber if the fragment has a velocity of 200 mm/s, 10 ms after ejection?
8.0× 10⁻⁵ Watts is the power exerted
What is Power, Energy and Work done?Physics' three essential notions are work, energy, and power. When a force (push or pull) given to an item results in the displacement of the object, that force is said to have performed work. Energy is how we describe the ability to perform the task. Power is the amount of work completed in a given amount of time.
mass of the body = 0.04 g = 4.0 × 10^-5 kg
velocity of the body = 200mm/s = 0.2 m/s
Kinetic energy of the body = 1/2 × 4.0 × 10^-5 × 0.2^2
Kinetic energy of the body = 8.0× 10^-7
Thus, work done = 8.0× 10^-7 J
Power = work done/ time
Power exerted = 8.0× 10^-7/0.01
Power exerted = 8.0× 10^-5 Watts
to learn more about Work, Energy and Power - brainly.com/question/60890
#SPJ4
The resistance of platinum thermometer is 5.7 5.5, 5.2 at boiling point,
unknown temperature, θ, and at the freezing point of water respectively.
Determine the unknown temperature in θ°C.
The unknown temperature is 64°C
Given,
Resistance at ice point,R[tex]_{0}[/tex] =5.2Ω,
Resistance at steam point,R[tex]_{100}[/tex] = 5.7Ω,
Resistance when dip in unknow, R[tex]_{t}[/tex] = 5.5Ω,
R[tex]_{100}[/tex] = R[tex]_{0}[/tex] (1+α100)
α = R[tex]_{100}[/tex]-R[tex]_{0}[/tex] / R[tex]_{0}[/tex]×100
α = 0.00096 = 9×[tex]10^{-4}[/tex]°C[tex]^{-1}[/tex]
Let the temperature of hot bath = t°C
R[tex]_{t}[/tex] = R[tex]_{0}[/tex](1+αt)
t = R[tex]_{t}[/tex]- R[tex]_{0}[/tex] / R[tex]_{0}[/tex] α
t = 0.3 / 0.00468
t = 64°C
The unknown temperature is 64°C.
Learn more about temperature here:
https://brainly.com/question/7510619
#SPJ1
A positive charge of 94. 0 nc is 22. 0 cm from a negative charge of 53. 0 nc. the force on one of the charges due to the other is approximately________.
A positive charge of 94. 0 NC is 22. 0 cm from a negative charge of 53. 0 NC. The force on one of the charges due to the other is approximately 92.6× 10⁹ N
Force between the two charges depends upon the charges, distance between the charges and the medium between the two charges. It is given by:
F = kq₁q₂ / r²
where q₁ is the charge of the first charge
q₂ is the charge of the second charge
r is the distance between the charges
k is the permitivitty of medium
F is the force between the two charges
Given , q₁ = 94NC
q₂ = 53NC
r = 22cm = 0.22m
On subsituting,
F = 9 × 10⁹ × 94 × 53 / (0.22)²
⇒ F = 92.6 × 10⁹ N
Since, the force between the two charges is equal on both the charges hence, force on one of the charges due to the other is approximately 92.6× 10⁹ N.
Learn more about Force here, https://brainly.com/question/11516376
#SPJ4
According to current scientific understanding, the idea that the milky way galaxy might be home to a civilization millions of years more advanced than ours is.
According to contemporary scientific understanding, the thought that the Milky Way Galaxy energy is home to a civilization millions of years more developed than ours is. one reasonable solution to Fermi's paradox.
What is the milky way galaxy?Our Milky Way galaxy is simply one of the billions of galaxies in the universe. Within it, there are at smallest 100 billion stars, and on moderate, each star contains at least one planet circling it. This means there are potentially thousands of planetary procedures like our solar system within the galaxy!The Milky Way gets its name from a Greek myth about the goddess Hera who sprayed milk across the sky. In other parts of the world, our galaxy goes by different names.The Milky Way is about we look. Up, down, left, right, that is the Milky Way. From Earth, it can be noticed as a hazy form of stars in the evening sky that the stripped eye can barely notice. You can visit the Milky Way all year, no matter where you are on the earth.To learn more about Milky Way galaxy, refer to:
https://brainly.com/question/13956361
#SPJ4
The distance covered by a car moving with a speed of 36 km/h in 15m is (a) 0.9 km (b) 9.0 km (C) 90 km (d) 900 km
Speed of a car = 36 km/h
Time taken = 15 minutes
Converting the time into hour:-
= 15/60 hours
= 1/4 hours
As we know that,
Distance = Speed × Time= (36 × 1/4) kilometres
= 9 kilometres
Hence the distance covered is 9 kilometres.
Option b) 9.0 kmThis is a uniform rectilinear motion exercise.
To start solving this exercise, we obtain the following data:
Data:v = 36 km/hd = ¿?t = 15 min = 0.25 hrMinutes to hour converter
60 min = 1 hour
[tex]\boldsymbol{\sf15\not{min}*\dfrac{1 \ hr}{60 \not{min}}=0.25 \ hr }}[/tex]
To calculate distance, speed is multiplied by time.
We apply the following formula: d = v * t
We substitute our data into the formula:
[tex]\boldsymbol{\sf{d=v*t}}[/tex]
[tex]\boldsymbol{\sf{d=36 \dfrac{km}{\not{h}}*0.25 \not{h} }}[/tex]
[tex]\boldsymbol{\sf{d=9 \ km}}[/tex]
The distance traveled by a car moving with a speed of 36 km/h in 15 m is 9 km.
Therefore, the correct option is "B".What is the momentum of a tiger that has a mass of 81 kg and runs with a velocity of 5. 4 m/s to the east? (1 point)
The momentum of a tiger that has a mass of 81 kg and runs with a velocity of 5. 4 m/s to the east will be 437.4 Kg m/s in east direction.
Momentum is a property of a moving body that the body has by virtue of its mass and motion and that is equal to the product of the body's mass and velocity broadly .It is a property of a moving body that determines the length of time required to bring it to rest when under the action of a constant force.
momentum = mass * velocity
given
mass of tiger = 81 kg
velocity of tiger = 5.4 m/s
since ,
momentum = m * v
= 81 * 5.4 = 437.4 Kg m/s
To learn more about momentum here
https://brainly.com/question/904448
#SPJ4
After an action potential, the opening of additional voltage-gated \text{________} channels and the inactivation of sodium channels, cause the membrane to return to its resting membrane potential.
After an action potential, the opening of voltage-gated potassium channels and Na channels causes the membrane to return to its resting membrane potential.
What is an action potential?An action potential is defined as a difference in electrical charges across the cell membrane due to the unequal distribution of ions.
An action potential is produced by potassium and sodium channels that allow the movement of positive ions across the membrane.
In conclusion, after an action potential, the opening of voltage-gated potassium channels and Na channels causes the membrane to return to its resting membrane potential.
Learn more about action potential here:
https://brainly.com/question/7778945
#SPJ1
Write an expression for elastic potential energy of a spring?
[tex]\huge\underline{\underline{\boxed{\mathbb {SOLUTION:}}}}[/tex]
[tex]\leadsto[/tex] The elastic potential energy of a spring can be said to be the energy possessed by a spring due to a force that compresses or stretches the spring. This can also be said to be the work which is done by the applied force against the restoring force of the spring, which is stored as the elastic potential energy.
The elastic potential of a spring can be expressed as:
▪ [tex]\longrightarrow \sf{PE= \: \dfrac{1}{2} kx}[/tex]
[tex]\huge\underline{\underline{\boxed{\mathbb {ANSWER:}}}}[/tex]
[tex] \bm{PE= \: \dfrac{1}{2} kx}[/tex]
The resistivity of the material of a wire is 1. 76 × 10-8 ωm. if the diameter of the wire is 2 × 10-3 m and its length is 2 m, what is its resistance?
The resistivity of the material of a wire is 1. 76 × 10-8 ωm. if the diameter of the wire is 2 × 10-3 m and its length is 2 m, then its resistance is 0.0112Ω
The resistance of a wire is solely determined by its length, cross-section area, and resistivity. So we calculate the resistance of a wire by knowing its diameter, length, and resistivity (which varies depending on the material). The resistance provided by a unit length of conductor with a unit area of cross-section is defined as resistivity. Its SI unit is the ohm-meter.
It does not alter as the wire length increases, but resistance increases fourfold when the wire is stretched to double its original length. Resistivity is defined as the electrical resistance per unit length and cross-sectional area of a conductor.
To learn more about resistance and resistivity please visit -
https://brainly.com/question/11431009
#SPJ4
If the current coming out a battery in a series circuit is 2 A, the current going into
the battery on the other side must be
Answer:
2 A
Explanation:
Kirchhoff Laws to the circuit consisting more than two batteries, the current leaving the battery is as same as entering the battery
electronicsstackexchangecom
The energy of a photon of red light is ____ the energy of a photon of blue light
A photon's energy and wavelength are inversely related. Since the wavelength of photons of blue light is less than photons of red light, it contains more energy than red photons.
Wavelengths of blue light are shorter, ranging from 450 to 495 nanometers. Red light has wavelengths that range from 620 to 750 nm and longer waves. Compared to red light, blue light has a greater frequency and more energy.
A photon's energy varies with its wavelength; those with longer wavelengths have less energy than those with shorter ones. For instance, red photons are less energetic than blue ones.
learn more about energy: https://brainly.com/question/2003548
#SPJ4
What must the charge (sign and magnitude) of a particle of mass 1. 45 g be for it to remain stationary when placed in a downward-directed electric field of magnitude 660 n/c?
The charge (sign and magnitude) of a particle of mass 1.45 g be for it to remain stationary when placed in a downward-directed electric field of magnitude 660 N/C is -2.19C
A particle with some charge moving in an electric field experience force due to electric field.
For the charged particle to remain stationary the force due to electric field and the weight of the particle should be equal.
Force due to electric field = QE
where, Q is the charge of the particle
E is the electric field = 660N/C
Weight of the particle = mg
where, m is the mass of particle = 1.45g = 0.00145kg
g is the acceleration due to gravity = 10m/s²
Hence, force due to electric field = weight of the particle
QE = mg
⇒ Q × 660 = 0.00145 × 10
⇒ Q = 2.19 C
Since the electric field is downward, hence to balance the charged particle, the force applied should be in the upwards direction. So, this is possible if the charge Q is negative.
So, the charged particle has a charge of -2.19C
Learn more about Force here, https://brainly.com/question/28042581
#SPJ4
PLEASE ANSWER ASAP!
Lai is trying to listen to a radio station for weather updates during a storm. The storm is causing electrical interference that affects radio waves. She knows that the weather station broadcasts both an analog and a digital radio signal.
Which signal would most likely be clearer during this storm, and how do you know?
(Choice A)
The analog signal because it can always be heard even when interference is high.
(Choice B)
The analog signal because interference can be filtered out of the signal.
(Choice C)
The digital signal because it can always be heard even when interference is high.
(Choice D)
The digital signal because interference can be filtered out of the signal.
The digital signal can always be always be heard even when interference is high. Option D
What is a radio signal?A radio signal makes use of the radio waves. The radio waves are long wavelength electromagnetic waves which are able to travel across a long distance. The signal can be transmitted in both analogue and digital formats.
However, the digital signal seems to be free from certain interferences that are caused by the scattering of the waves across distances. This could diminish the quality of sound that is heard.
Thus, the digital signal can always be always be heard even when interference is high.
Learn more about radio signals:https://brainly.com/question/19338932
#SPJ1
How many minutes will it take to plate out 16. 22 g of al metal from a solution of al 3 using a current of 12. 9 amps in an electrolytic cell?
It will take 103 minutes to plate out 16. 22 g of al metal from a solution of al 3 using a current of 12. 9 amps in an electrolytic cell
Electrolytic cell, any device in which electrical energy is converted to chemical energy, or vice versa. Such a cell typically consists of two metallic or electronic conductors (electrodes) held apart from each other and in contact with an electrolyte (q.v.), usually a dissolved or fused ionic compound
First, look at the reaction to decided how many moles of electrons it will take:
Al3+ + 3e ------> Al(s)
It takes 3 electrons to convert 1 mole of Al3+
Next, figure out how many moles of Al metal you want:
I mole of Al mass = 26 g
1 g of Al will have = 1/26 moles
16. 22 g of al metal will have = 16.22 / 26 moles 0.624 moles
since , their are 3 electrons
0.624 x 3= 1.87 moles of electrons
using Faraday constant to find the number of coulombs (C) needed:
1 faraday = 96500 C per mole
1.87 x 96500 = 180455
Since, 1 amp = 1 C/sec,, time needed to supply a current of 12.9 amp will be
80455C / 12.9 C = 6236.82 sec = 103 minutes
To learn more about electrolytic cell here
https://brainly.com/question/862677
#SPJ4
A charge q = -10 µc experiences an electrostatic force of 35 mn to the left. What is the magnitude and direction of the electric field?
A charge q = -10 µc experiences an electrostatic force of 35 mn to the left.
The magnitude of electric field will be = 35 * [tex]10^{2}[/tex] N/C
Direction of the electric field will be from left to right
The force exerted by a charged body on another charged or uncharged body is called electrostatic force. This force is known as non-contact force because these forces comes into play even when the bodies are not in contact with each other.
Electric field, an electric property associated with each point in space when charge is present in any form. The magnitude and direction of the electric field are expressed by the value of E, called electric field strength or electric field intensity or simply the electric field.
given
q ( charge ) = -10 µc
Electrostatic force = 35 mN
Electric field = Force on charge / charge
= 35 * [tex]10^{-3}[/tex] / (-10 * [tex]10^{-6}[/tex])
= - 35 * [tex]10^{2}[/tex] N/C
To learn more about Electric field here
https://brainly.com/question/15800304
#SPJ4
If you illuminate red paint with pure blue light, what color will that paint appear?
The red paint will appear no colour when it is illuminated with pure blue light.
Why does a red colour appear as red?When visible light of all wavelengths incident on a red coloured object, it absorbs all the wavelengths accept red colour.So it is reflected from its surface and makes the object red.What does happen when red coloured object is illuminated by pure blue light?As the pure blue light has no red coloured wavelength, so the object cannot reflect the red light wavelength. So we will get no reflection from the object.Thus, we can conclude that the red coloured object appears colourless as it is illustrated by pure blue light.
Learn more about the colour reflection here:
brainly.com/question/15257436
#SPJ1
21. A person standing 49.5m from the foot of a cliff claps his hands and hears an echo 0.3
seconds later. Calculate the velocity of the sound in air
Answer:
330 m/s
Explanation:
The sound wave has to travel TO the cliff AND back = 2 * 49.5 = 99 m
magnitude of velocity = distance / time = 99m / .3 s = 330 m/s
A rubber ball is dropped on the floor. The rebound speed is one-half the speed it had just before hitting the floor. It will rise to ________ of the original height from which it was dropped. Group of answer choices 1/3 1/8 1/6 1/4 1/5
Since the rebound speed is one-half the speed it had just before hitting the floor, it will rise to 1/4 of the original height from which it was dropped; option C.
What is rebound speed?Rebound speed refers to the speed at which a body when it hits a surface is returned or rebounded to the original direction in which it comes from.
When objects are released from a height and allowed to hit the floor, some of the original energy of the object is converted to heat and sound, thus the object will rebound with a lesser speed and to a smaller height than from which it is released.
In the case of a rubber ball which is dropped on the floor. The rebound speed is one-half the speed it had just before hitting the floor.
Therefore, the height will be one-quarter the original height.
In conclusion, the rebounding of a ball is to a lesser height than the original height.
Learn more about rebound speed at: https://brainly.com/question/20884757
#SPJ1
We know that an electric field contains energy. What causes the electric field itself?
A
electrical charges on one or more particles within the field
B
the combined mass of all particles in the field
C
the degree of magnitization of particles within the field
D
No-one really knows, the field is just always there.
Electrical charges on one or more particles within the field cause the electric field
Each point in space has an electric field associated with it when a charge of any kind is present. The value of E, often known as the electric field strength, electric field intensity, or just the electric field, expresses the strength and direction of the electric field
A region of space surrounding an electrically charged particle or object known as an electric field is one in which an electric charge would experience force. A vector quantity called an electric field can be represented by arrows pointing in the direction of or away from charges. The force per unit charge exerted on a positive test charge that is at rest at a given position is the force per unit charge that is used to define the electric field analytically.
To learn more about electric field please visit - https://brainly.com/question/15800304
#SPJ1
Which wavelength of light is the best choice when attempting to quantitatively relate solution absorbance and concentration?.
310 nm
310 nm wavelength of light is the best choice when attempting to quantitatively relate solution absorbance and concentration.
What does beer lambert law state?The Beer-Lambert law states that "the quantity of light absorbed by a substance dissolved in a fully transmitting solvent is directly proportional to the concentration of the substance and the path length of the light through the solution."
Here, the wavelength for absorption is 310 nm. We confirmed that the largest aggregation happens at this wavelength based on the preliminary experiments. Your spectrum measurements may be repeated at a very low concentration. From there, you may deduce the concentration and maximum absorbance at the relevant wavelength.Applications of Beer-Lambert law:Beer-law Lambert's is used to analyze a combination using spectrophotometry without the sample needing to go through a lot of pre-processing. The measurement of bilirubin in blood plasma samples is one example. Since the molar absorbance is known, the spectrum of pure bilirubin is also known.Limitations of Beer-Lambert law:light scattering as a result of sample-related particles. the sample's fluorescence or phosphorescence. refractive index modifications at high analyte concentrations. alterations in chemical equilibrium that occur as a result of concentration.To learn more about Beer-Lambert law visit:
https://brainly.com/question/8831959
#SPJ4
The critical path is the sequence of activities that determine the latest date by which the project can be evaluated.
a. true
b. false
The statement given about the critical path is true.
To find the answer, we have to know more about the critical path.
What is critical path?The longest series of tasks in a project plan that must be finished on time for it to be finished by the deadline is known as the critical path. The critical route is the set of actions that, when carried out in a timely manner while taking into account all the aforementioned factors, will take the longest to accomplish the project. Because it is the "red alert" of paths, the critical path is referred to as "critical". Your project won't be successfully completed before the deadline if it doesn't follow the critical path's timing and order.Thus, we can conclude that, the statement given about the critical path is true.
Learn more about the critical path here:
https://brainly.com/question/15091786
#SPJ4
write the factors of which affect pressure
Answer:
They are:
1. Height of liquid
2. Density of liquid
3. Acceleration due to gravity
