Option C (If the requirement is 15,000 units, the buy option is $5,500 cheaper than the make option) is the correct answer. In the given hypothetical situation in which a firm has the option to make or buy a part, a supplier is able to supply the part at $7 per unit.
In the given hypothetical situation in which a firm has the option to make or buy a part, a supplier is able to supply the part at $7 per unit. The firm estimates that it costs $500 to prepare the contract with the supplier. To make the part, the firm must invest $25,000 in equipment, and the firm estimates that it costs $5 per unit to make the part. We need to calculate which option is cheaper for the firm to consider.
The formula for the make option is: $5/unit + $25,000/15,000 units = $6.67/unit
The formula for the buy option is:$7/unit * 15,000 units + $500 = $106,500
Hence, if the requirement is 15,000 units, the buy option is $5,500 cheaper than the make option. Option O (If the requirement is 15,000 units, the buy option is $5,500 cheaper than the make option) is correct.
The break-even point can be calculated as follows: $5/unit + $25,000/x = $7/unit * xTotal Cost (TC) = Fixed Cost (FC) + Variable Cost (VC) * Quantity (Q)
Where,FC for make option = $25,000
VC for make option = $5/unit
FC for buy option = $500
VC for buy option = $7/unit
TC for make option = $25,000 + $5/unit * x
TC for buy option = $500 + $7/unit * x
For the break-even point, TC for make option = TC for buy option
$25,000 + $5/unit * x = $500 + $7/unit * xx = 12,250 units
The break-even point is 12,250 units. And, the total cost at the break-even point is $86,250. Option O (The break-even point is 12,250 units and the total cost at the break-even point is $86,250) is not correct.
To know more about contract visit: https://brainly.com/question/32254040
#SPJ11
Monthly demand from the customer = 37,000 units. Considering 20
days per month, and 7.5 working hours per day, what is the Takt
time? Enter number and decimal only
The Takt time is approximately 0.00405 hours per unit.
The Takt time is a measure of the time available to produce one unit of a product in order to meet customer demand. It is calculated by dividing the available working time by the customer demand.
In this case, the available working time is determined by multiplying the number of working days per month (20 days) by the number of working hours per day (7.5 hours), which gives us a total of 150 hours of available working time.
The customer demand is given as 37,000 units per month.
To calculate the Takt time, we divide the available working time (150 hours) by the customer demand (37,000 units):
Takt time = 150 hours / 37,000 units
After performing the calculation, we find that the Takt time is approximately 0.00405 hours per unit. This means that, on average, it should take around 0.00405 hours (or approximately 14.58 seconds) to produce one unit in order to meet the customer demand of 37,000 units per month.
The Takt time is an important concept in lean manufacturing and helps in determining the production rate needed to match customer demand. It serves as a guideline for setting the pace of production and assists in achieving efficient production flow.
Learn more about Takt time here:-
https://brainly.com/question/28078662
#SPJ11
what was the result of andrew carnegie's sale of carnegie steel?
The result of Andrew Carnegie's sale of Carnegie Steel was the creation of the world's largest steel company. Andrew Carnegie was the founder of Carnegie Steel. He sold his company to J.P. Morgan's United States Steel Corporation in 1901.
The sale was worth about $480 million dollars and this led to the creation of the world's largest steel company at that time. The sale of Carnegie Steel to J.P. Morgan's United States Steel Corporation was one of the largest business deals in the history of the United States. This deal created an enormous amount of wealth for Carnegie, who had been one of the richest men in the world before the sale. After the sale, he dedicated his life to philanthropy and donated much of his fortune to causes that he believed would help the world.
Learn more about andrew carnegie's sale result https://brainly.com/question/27991888
#SPJ11
Define the customer experience from an interactive marketing perspective. List the seven website design elements that companies use to produce a customer experience. Which two of these design elements provide a platform for the other five?
Customer experience (CX) refers to the entirety of the customer's interactions with a company and its products and services. It is a key component of interactive marketing and aims to create positive, memorable experiences for customers that build brand loyalty and drive business growth.
Companies use website design elements to produce a customer experience that aligns with their branding and marketing goals. The seven website design elements that companies use to produce a customer experience include:
1. Layout: The arrangement of visual elements on a website's pages
2. Typography: The style, size, and arrangement of text on a website's pages
3. Color: The selection of colors used on a website's pages
4. Images: The selection of photos, illustrations, and other visual media on a website's pages
5. Video: The use of video content on a website's pages
6. Audio: The use of sound and music on a website's pages
7. Navigation: The ease of moving around a website and finding what a customer is looking for.
The two design elements that provide a platform for the other five are layout and navigation. The layout establishes the visual hierarchy and arrangement of content on the website, while navigation provides the framework for moving between different pages and sections. Together, these two elements create a foundation for the other design elements to build on, ensuring a cohesive and effective customer experience.
To know more about Customer experience visit:
https://brainly.com/question/30283854
#SPJ11
The goods and services tax (GST) was introduced in Australia on 1 July 2000. The preceding months before the GST became active saw a spike in consumption as consumers rushed to purchase goods that they perceived would be substantially more expensive with the GST. The effects of the surging demand on inflation and the central bank’s policy responses (i.e., cash rate, the policy interest rate in Australia) are illustrated in Figure 1. Using the AD-AS framework, explain what happened to output and the price level when Australia introduced GST in the short run and in the long run. For simplicity, you may assume that the introduction of GST had no effects on the supply side of the economy. [6 marks]
the introduction of the GST tax leads to a short-term increase in demand, output, and inflation, but in the long run, the economy returns to its equilibrium level, with no permanent effects on output or price levels.
The introduction of the goods and services tax (GST) in Australia on 1 July 2000 had significant impacts on the country's economy. Before the GST became operational, there was a spike in consumption as consumers hurried to buy products they believed would be substantially more expensive with the GST. The figure 1 shows the effects of the surging demand on inflation and the central bank's policy responses (i.e., cash rate, the policy interest rate in Australia) in the period before and after the GST's introduction.
The aggregate demand (AD) - aggregate supply (AS) framework is a tool that can be used to analyze the impacts of GST on output and price levels. In the short run, GST's introduction increased demand as consumers scrambled to purchase goods before the tax went into effect. As a result, the aggregate demand (AD) curve shifted to the right from AD0 to AD1 in the short term, as seen in Figure 2. When AD shifts to the right, there is a short-run output expansion since the real Gross Domestic Product (GDP) rises.
Figure 2: AD-AS framework in short run
In the short run, the price level will rise in response to increased demand. This is because the economy is producing at a higher output level, which means that businesses are working at full capacity to meet demand. The shift in AD leads to a temporary inflationary pressure, with a rise in the price level from P0 to P1, as seen in Figure 2.
In the long run, the economy returns to its equilibrium level, and the price level decreases. When the economy reaches its full capacity in the long run, the short-run aggregate supply curve (SRAS) shifts to the left, as seen in Figure 3. This shift results from increased input prices, such as wages, rent, and raw materials. When SRAS shifts to the left, the economy moves to a new equilibrium point (E1), where output is equal to potential GDP, and the price level returns to its original level, P0.
Figure 3: AD-AS framework in long run
Therefore, the introduction of the GST tax leads to a short-term increase in demand, output, and inflation, but in the long run, the economy returns to its equilibrium level, with no permanent effects on output or price levels.
To know more about services visit;
brainly.com/question/30418810
#SPJ11
Selected information from Industrial Corp.'s financial statements for the year ended December 31, 2021 included the following (in S): Cash $200,000 Accounts Receivable 350,000 Inventory 590,000 Property, Plant & Equip. 2.800.000 Total Assets $3,040,000 Accounts Payable $320,000 Long-term Debt 1,8500,000 Common Stock Retained Earnings 800,000 Total Liabilities & Equity 970,000 $3,940,000 Calculate Industrial Corp.'s Current ratio?
The current ratio measures a company's liquidity and its ability to pay off its short-term liabilities using its short-term assets. It is calculated by dividing a company's current assets by its current liabilities. The current ratio can be expressed as a numerical value or as a percentage.
The formula for the current ratio is as follows:Current Ratio = Current Assets / Current LiabilitiesGiven the following figures, the calculation for Industrial Corp.'s current ratio is:Current Assets = Cash + Accounts Receivable + Inventory = $200,000 + $350,000 + $590,000 = $1,140,000
Current Liabilities = Accounts Payable = $320,000Current Ratio = $1,140,000 / $320,000 = 3.56Therefore, Industrial Corp.'s current ratio for the year ended December 31, 2021, is 3.56.
To know more about liquidity visit:-
https://brainly.com/question/14363432
#SPJ11
Which of the following would be an example of the "effects test" in determining a discriminatory act? No families with children. Christians preferred. Clean Polish neighborhood. A good school.
The effects test in determining a discriminatory act would be "No families with children."
In discrimination law, the effects test is used to determine whether a practice or policy has a discriminatory effect on a particular group, even if there is no intention to discriminate.
The statement "No families with children" is an example of the effects test because it implies discrimination against families with children.
Even if the landlord or property owner does not have the intent to discriminate against families, the policy of not allowing families with children to rent the property has a discriminatory effect on them.
This type of discrimination is illegal under the Fair Housing Act. The other statements in the given choices may or may not be discriminatory depending on the context and the intention behind them.
For example, "Christians preferred" may be discriminatory if it is done to exclude individuals of other religions or beliefs.
However, if it is done to create a community with shared religious values and beliefs, it may not be considered discriminatory.
Learn more about landlord here.
https://brainly.com/questions/29741978
#SPJ11
Two-Part Pricing. A golf club has determined that its local community has two broad groups of consumers: casual golfers and serious golfers. The golf club plans to charge golfers both a monthly membership fee (F) and a price (P) for each round of golf played. The club has estimated the following details for each consumer group, where P represents the price per round of golf and Q represents the number of rounds played each month. There are 30 serious golfers and each serious golfer has a direct demand of Qs (Ps) = 350-2PS. There are 54 casual golfers and each casual golfer has a direct demand of Qc (Pc) = 280-2PC- The marginal cost associated with each round is equal to $20. Ignore fixed costs. Assume that this golf club cannot price discriminate and must charge one price (P) and one membership fee (F). We will now determine whether it is more profitable for the golf club to select its prices based on the preferences of casual golfers or on the preferences of serious golfers. Prices Based on the Preferences of Serious Golfers For the next two parts, assume that the golf club is basing its prices on the preferences of serious golfers. Assume that casual golfers do not participate in the market. Hint: you should not need to set up a profit-maximization problem. Part 1 (4 points): Determine the membership fee (F) that the golf club will use. Membership fee (F): $24025.00. (Enter your answer rounded to two decimal places and use the rounded value in Part 2). Part 2 (4 points): Determine the profits that the golf club will receive. Profits: $720750.00. (Enter your answer rounded to two decimal places). Prices Based on the Preferences of Casual Golfers For the next two parts, assume that the golf club is basing its prices on the preferences of casual golfers. Assume that both serious and casual golfers participate in the market. Hint: you should need to set up a profit-maximization problem. Part 3 (4 points): Determine the profit-maximizing price (P) that the golf club will use. Price (P): $32.50. (Enter your answer rounded to two decimal places and use the rounded value in Parts 4 and 5). Part 4 (4 points): Determine the membership fee (F) that the golf club will use. Membership fee (F): $11556.25. (Enter your answer rounded to two decimal places and use the rounded value in Part 5). Part 5 (4 points): Determine the profits that the golf club will receive. Profits: $ 1222725.00. (Enter your answer rounded to two decimal places).
The golf club has two groups of consumers – casual golfers and serious golfers. Using a two-part pricing strategy, the club charges a monthly membership fee and a price per round of golf.
For serious golfers, the optimal membership fee is $24025 with an expected profit of $720750.
For casual golfers, the optimal price per round is $32.50, with a membership fee of $11556.25, and an expected profit of $1222725.
Two-part pricing is a popular pricing strategy used by many businesses. In this case, the golf club uses a two-part pricing strategy by charging a monthly membership fee and a price per round of golf.
The first set of calculations dealt with serious golfers who have a direct demand of Qs (Ps) = 350-2PS. By setting the membership fee at $24025, the golf club maximizes its profits at $720750.
The second part of the calculations dealt with casual golfers who have a direct demand of Qc (Pc) = 280-2PC.
Since both casual and serious golfers participate in the market, it was necessary to set up a profit-maximization problem. By setting the price per round of golf at $32.50 and the membership fee at $11556.25, the golf club maximizes its profits at $1222725.
In conclusion, the golf club's profits can be maximized by setting prices based on the preferences of its customers. By utilizing a two-part pricing strategy, the golf club can tailor its prices to different groups of customers and capture more profits.
Learn more about membership here.
https://brainly.com/questions/14748159
#SPJ11
s A corporation has issued 50,000 shares of $100 par common stock and holds 6,000 of these shares as treasury stock. If the corporation declares a $2 per share cash dividend, what amount will be recorded as cash dividends? O $44,000 $88,000 $96,000 O $100,000
The amount recorded as cash dividends will be $88,000.
Given the information about a corporation which has issued 50,000 shares of $100 par common stock and holds 6,000 of these shares as treasury stock.
The corporation declares a $2 per share cash dividend. We need to determine what amount will be recorded as cash dividends.150 words solution:The total amount of the par value of the 50,000 shares of common stock issued by the corporation is:
$100 per share x 50,000 shares = $5,000,000If the corporation holds 6,000 of these shares as treasury stock, the number of outstanding shares is:50,000 shares issued − 6,000 shares treasury stock = 44,000 outstanding shares
When the corporation declares a cash dividend of $2 per share, the total amount of the dividend is:$2 per share x 44,000 outstanding shares = $88,000
Therefore, the amount recorded as cash dividends will be $88,000. Hence, option (b) is correct.
Know more about cash dividends here,
https://brainly.com/question/13535979
#SPJ11
.China Imports Inc. sold 12,000 units in May. Per unit selling price and variable expense were $27 and $19, respectively. Fixed expense incurred for May totaled $64,000.
Required:
Prepare the May income statement for China Imports in the contribution margin format.
China Imports Inc.
Income Statement (May)
Contribution Margin Format
Sales Revenue:
12,000 units x $27 = $324,000
Variable Expenses:
12,000 units x $19 = $228,000
Contribution Margin:
Sales Revenue - Variable Expenses
$324,000 - $228,000 = $96,000
Fixed Expenses:
$64,000
Net Operating Income:
Contribution Margin - Fixed Expenses
$96,000 - $64,000 = $32,000
The May income statement for China Imports Inc. in the contribution margin format is as follows:
Sales Revenue: $324,000
Variable Expenses: $228,000
Contribution Margin: $96,000
Fixed Expenses: $64,000
Net Operating Income: $32,000
In the contribution margin format, the income statement separates costs into variable and fixed expenses. The contribution margin represents the amount available to cover fixed expenses and contribute towards profit. In this case, China Imports Inc. generated a net operating income of $32,000 in May after deducting both variable and fixed expenses from its sales revenue.
Learn more about Income here
https://brainly.com/question/28390284
#SPJ11
Acme Corporation is liquidated with Joe, sole shareholder, receiving property having an adjusted basis of $70,000 and an FMV of $100,000. The property has a mortgage of 90,000. Joe's basis in the Acme stock surrendered is $60,000. Describe the tax consequences to Joe and Acme as a result of the liquidation.
Please explain step by step so I can understand the concepts, not just an answer.
When Acme Corporation is liquidated, the tax consequences to Joe, the sole shareholder, and Acme Corporation are as follows:
Tax Consequences to Joe:
a) Joe will recognize a capital gain or loss on the distribution of the property. The capital gain or loss is calculated as the difference between the fair market value (FMV) of the property received ($100,000) and Joe's basis in the Acme stock surrendered ($60,000). In this case, Joe will have a capital gain of $40,000 ($100,000 - $60,000).
b) Joe's basis in the property received will be equal to the adjusted basis of the Acme stock surrendered ($60,000). This becomes Joe's new basis in the property for future tax calculations.
c) Joe will not recognize any income or gain on the cancellation of debt from the mortgage since the mortgage exceeds the FMV of the property received.
Tax Consequences to Acme Corporation:
a) Acme Corporation will recognize a gain or loss on the distribution of the property. The gain or loss is calculated as the difference between the FMV of the property received ($100,000) and the adjusted basis of the property ($70,000). In this case, Acme Corporation will have a gain of $30,000 ($100,000 - $70,000).
b) Acme Corporation will report this gain on its final corporate tax return.
It is important to note that tax consequences may vary depending on the specific details and circumstances of the liquidation. It is advisable to consult with a tax professional for accurate and tailored advice.
Learn more about Corporation here
https://brainly.com/question/13551671
#SPJ11
Use the blue point (circle symbol) to indicate the quantity of labor demanded, and use the orange point (square symbol) to indicate the quantity of labor supplied in this case. ? Supply Demand Initial Labor Demanded Initial Labor Supplied Minimum Wage New Labor Demanded New Labor Supplied Quantity of Labor Suppose there is an increase in the minimum wage. On the previous graph, shift the black line labeled "Minimum Wage" to show the effect this has on the wage paid to workers. Then use the green point (triangle symbol) to indicate the new quantity of labor demanded, and use the purple point (diamond symbol) to indicate the new quantity of labor supplied given this increase in the minimum wage. True or False: The amount of unemployment in this industry falls as a result of the increase in the minimum wage. O True O False Wage Minimum Wage +
False. The amount of unemployment in this industry does not necessarily fall as a result of the increase in the minimum wage.
When the minimum wage increases, it affects the wage paid to workers, which can have an impact on the quantity of labor demanded and supplied in the market.
If we shift the black line labeled "Minimum Wage" upward to represent the increase in the minimum wage, the wage paid to workers will be higher. This can lead to a decrease in the quantity of labor demanded (shown by the green point) and an increase in the quantity of labor supplied (shown by the purple point).
However, the overall impact on unemployment depends on the specific circumstances and the elasticity of demand and supply for labor in the industry. If the increase in the minimum wage causes the quantity of labor demanded to decrease more than the quantity of labor supplied increases, then unemployment may rise. Conversely, if the increase in the minimum wage leads to a small decrease in the quantity of labor demanded compared to the increase in the quantity of labor supplied, unemployment may decrease.
Therefore, it is not accurate to make a general statement that the amount of unemployment in this industry falls as a result of the increase in the minimum wage. The specific impact on unemployment would depend on the dynamics of labor demand and supply in the given industry.
To know more about wage, visit:
https://brainly.com/question/29603429
#SPJ11
what is the net present value of a project with an initial cost of $6,640 and cash inflows of $400, $1,300, and $2,500 for years 1 to 3, respectively? the discount rate is 17 percent.
The net present value (NPV) of a project with an initial cost of $6,640 and cash inflows of $400, $1,300, and $2,500 for years 1 to 3, respectively, can be calculated using a discount rate of 17 percent.
To calculate the net present value (NPV), we need to discount each cash inflow to its present value and then subtract the initial cost. Using a discount rate of 17 percent, we can calculate the present value of each cash inflow as follows:
Year 1: $400 / (1 + 0.17)^1 = $400 / 1.17 = $341.88
Year 2: $1,300 / (1 + 0.17)^2 = $1,300 / 1.3849 = $938.45
Year 3: $2,500 / (1 + 0.17)^3 = $2,500 / 1.6412 = $1,523.75
Next, we sum up the present values of the cash inflows: $341.88 + $938.45 + $1,523.75 = $2,804.08
Finally, we subtract the initial cost of $6,640 from the present value of the cash inflows: $2,804.08 - $6,640 = -$3,835.92
Therefore, the net present value (NPV) of the project is -$3,835.92. Since the NPV is negative, it suggests that the project may not be financially viable, considering the initial cost and expected cash inflows at a discount rate of 17 percent.
learn more about cost here:brainly.com/question/14566816
#SPJ11
Normalize the following relations to fifth normal form. Underline the primary key, bold the foreign key, and italicize the candidate key. Your assumption(s) has to be logical, flexible, realistic and cannot overrule the stated assumption(s). Assumptions: any attribute can be used in two or more normalized relations; and each division has its own inventory. MisInventory (ProductId, ProductCost, ProductPrice, Date, ProductName, ProductQuantiy, DivisionId, Division Name, Product Description, FedTaxId, State TaxId)
The given relation has been normalized into three separate relations (MisProduct, MisDate, MisDivision) up to the fifth normal form.This normalization process ensures data consistency, eliminates redundancy, and allows for efficient data management.
To normalize the given relation to fifth normal form, we need to analyze the functional dependencies and separate them into multiple relations. Based on the given attributes and assumptions, we can identify the following functional dependencies:
1. ProductId -> ProductCost, ProductPrice, ProductName, ProductQuantity, ProductDescription
2. Date -> FedTaxId, StateTaxId
3. DivisionId -> DivisionName
Based on these functional dependencies, we can create the following normalized relations:
Relation 1: MisProduct (ProductId*, ProductCost, ProductPrice, ProductName, ProductQuantity, ProductDescription)
Relation 2: MisDate (Date*, FedTaxId, StateTaxId)
Relation 3: MisDivision (DivisionId*, DivisionName)
Now, we need to determine the foreign key relationships between these relations.
In Relation 1 (MisProduct), DivisionId is a foreign key referencing DivisionId in Relation 3 (MisDivision).
In Relation 1 (MisProduct), Date is a foreign key referencing Date in Relation 2 (MisDate).
Therefore, the normalized relations in fifth normal form are as follows:
MisProduct (ProductId*, ProductCost, ProductPrice, ProductName, ProductQuantity, ProductDescription, DivisionId*)
MisDate (Date*, FedTaxId, StateTaxId)
MisDivision (DivisionId*, DivisionName)
In these relations, the primary keys are underlined, foreign keys are bold, and candidate keys are italicized.
Learn more about ”data management” here:
brainly.com/question/30296990
#SPJ11
7. Which of the following best describes a firm with low operating leverage? A large change A. earnings before interest and taxes result in a small change in net income B. sales result in a small change in net income. C. the number of units a firm produces and sells result in a similar change in the firm's earnings before interest and taxes. D. earnings before interest and taxes result in a small change in earning per share.
c) High levels of financial leverage increase business risk while high levels of operating leverage will decrease business risk.
This statement is the most accurate among the options provided. Financial leverage refers to the use of debt financing by a firm, which increases the financial risk associated with the business. When a company has a high level of financial leverage, it means it has a significant amount of debt relative to its equity. This increases the risk of insolvency or financial distress if the company is unable to meet its debt obligations.
On the other hand, operating leverage refers to the proportion of fixed costs in a company's cost structure. High levels of operating leverage mean that a larger portion of the costs is fixed, such as rent, salaries, or depreciation. While high operating leverage can increase the variability of profits due to changes in sales, it can also provide opportunities for higher profitability when sales increase, as the fixed costs are spread over a larger sales base.
Therefore, high levels of financial leverage increase business risk, while high levels of operating leverage can decrease business risk by improving profitability and efficiency when sales are strong.
Learn more about business risk here:
https://brainly.com/question/32303361
#SPJ11
As an applicant for a food service assistant position, write not less than 180 words about how you have demonstrated basic knowledge of quality improvement programs and a commitment to participating in development programs in your previous work experience.
As an applicant for a food service assistant position, I have demonstrated basic knowledge of quality improvement programs and a commitment to participating in development programs in my previous work experience. One of the main answers that demonstrate this was when I worked at a restaurant that was part of a larger chain. As part of this chain, we were required to participate in regular quality improvement programs that were designed to improve our service, efficiency, and overall customer satisfaction.
During these programs, I worked with my colleagues to identify areas where we could improve, such as our speed of service or the quality of our food. We then developed action plans to address these issues and regularly reviewed our progress to ensure that we were making the necessary improvements. Through these programs, I gained a deeper understanding of the importance of quality improvement and how it can benefit both customers and employees.
Demonstrated my commitment to participating in development programs when I enrolled in a training program on food safety and sanitation. This program was designed to teach me the best practices for handling food safely and avoiding foodborne illnesses. During the program, I learned about the dangers of cross-contamination, the importance of proper cleaning and sanitation procedures, and how to identify potential food safety hazards. By participating in this program, I demonstrated my commitment to not only providing high-quality food but also ensuring that it is safe for our customers to consume.
In conclusion, I have demonstrated basic knowledge of quality improvement programs and a commitment to participating in development programs in my previous work experience. These experiences have given me a solid foundation in the importance of quality improvement and have instilled in me a desire to continuously develop my skills and knowledge to better serve my customers.
Learn more about developed action plans: https://brainly.com/question/29546029
#SPJ11
Operating Cash Flow (OCF) as used in finance formulas is exactly
the same as Cash Flow From Operations (CFFO) found on the statement
of cash flows.
False. While Operating Cash Flow (OCF) and Cash Flow From Operations (CFFO) are related concepts, they are not exactly the same.
OCF is a measure used in finance formulas to assess a company's cash-generating ability from its core operations. It is calculated by adding back non-cash expenses like depreciation and amortization to net income and adjusting for changes in working capital.
On the other hand, Cash Flow From Operations (CFFO) is a line item found on the statement of cash flows, which provides a detailed breakdown of a company's cash inflows and outflows from its operating activities. CFFO encompasses all cash transactions related to the company's day-to-day operations, including cash receipts from sales, payment to suppliers, and other operating expenses.
Learn more about cash flow analysis here:
https://brainly.com/question/27994727
#SPJ11
A government entity is required to include a statement of cash flows in which of the following financial statements?
1) Governmental fund financial statements.
2) Proprietary fund financial statements.
3) Fiduciary fund financial statements.
4) Government-wide financial statements.
The statement of cash flows is included in option 2) Proprietary fund financial statements. Option 2
Proprietary funds are used to account for activities that operate like businesses and charge fees for goods or services provided. These funds are primarily used by government entities when they engage in activities that are intended to recover their costs through user fees, such as utilities, airports, or parking services.
Since proprietary funds function similarly to business enterprises, they follow generally accepted accounting principles (GAAP) like commercial entities. As per GAAP requirements, proprietary fund financial statements should include a statement of cash flows to provide information on the cash flows from operating, investing, and financing activities.
On the other hand, governmental fund financial statements (option 1) focus on non-business-like activities, such as general government services and public safety. Fiduciary fund financial statements (option 3) pertain to resources held in a trustee or agency capacity for others.
Option 2
for more such question on financial visit
https://brainly.com/question/989344
#SPJ8
Based upon the video, "Fiscal Policy and Stimulus," discuss the following:
1. Compare and contrast the use of government spending changes versus tax changes as a means of influencing the course of the economy.
2. Is one or the other preferable in specific situations?
3. What are the short-run and long-run implications?
4. What solutions do you recommend? (Think beyond the scope of the video and keep it to economical thought.)
5. What would a Neoclassical economist say about your solutions?
6. What would a Keynesian economist say about your solutions?
7. Apply economic theories and models to support your response.
Government spending changes and tax changes are two tools of fiscal policy used to influence the economy.
Government spending changes involve increasing or decreasing the amount of money the government spends on goods, services, or infrastructure projects.Government spending changes directly impact aggregate demand by injecting money into the economy, while tax changes affect disposable income and consumer spending.
The preference between government spending changes and tax changes depends on the specific situation. During periods of inflation or economic overheating, tax changes might be preferred as they can help control aggregate demand and prevent excessive inflation.
In the short run, government spending changes and tax changes can have immediate effects on the economy. Government spending increases can lead to higher employment, increased consumer spending, and economic expansion. In the long run, the implications depend on the sustainability and efficiency of government spending and the impact of tax changes on incentives and economic behavior.
A neoclassical economist might emphasize the importance of market mechanisms, efficient resource allocation, and limited government intervention. A Keynesian economist would likely support government intervention through fiscal policy to stabilize the economy and manage aggregate demand.
To learn more about fiscal policy, click here: brainly.com/question/29790045
#SPJ11
A gourmet coffee shop in downtown San Francisco is open 200 days a year and sells an average of 75 pounds of Kona Coffee beans a day. (Demand can be assumed to be distributed normally with a standard deviation of 16 pounds/day.) After ordering (fixed cost = $13 per order), beans are always shipped from Hawaii within exactly 4 days. Per-pound annual holding costs for the beans are $3.
The coffee shop should order 26 pounds of Kona Coffee beans at a time to minimize the inventory cost.
Firstly, the coffee shop sells an average of 75 pounds of Kona Coffee beans a day. We can assume that the demand is distributed normally with a standard deviation of 16 pounds/day. Here, we can calculate the average daily demand, denoted as 'D' as follows: Average daily demand, D = 75 pounds/day. Now, we need to calculate the standard deviation of daily demand, denoted as 'σ'.σ = 16 pounds/day. The gourmet coffee shop is open 200 days a year, denoted as 'N'.N = 200 days. The fixed ordering cost per order, denoted as 'S' is $13 per order.S = $13/order.
The lead time, denoted as 'L', is 4 days. L = 4 days. The per-pound annual holding cost, denoted as 'H' is $3.H = $3/pound. Now, we can calculate the Economic Order Quantity (EOQ) as follows: EOQ = [tex]√(2DS/H(1-(D/N)) L)[/tex], Where D is the average daily demand, S is the fixed ordering cost per order, H is the per-pound annual holding cost, L is the lead time and N is the number of working days in a year. Putting the values of D, S, H, L, and N in the above formula, we get [tex]EOQ = √(2 × 75 × 13/3(1-(75/200)) × 4)EOQ = √(2 × 975/3 × 125/200 × 4)EOQ = √(650)EOQ = 25.49 ≈ 26 (approx).[/tex]Hence, the coffee shop should order 26 pounds of Kona Coffee beans at a time to minimize the inventory cost.
Learn more about inventory
https://brainly.com/question/18722211
#SPJ11
Which 3 statements are true regarding Bank Rules?
One or more of your selected options was incorrect. Selecting even just one incorrect option will earn no credit for this question. Please try again.
O You can have up to five conditions apply to a rule
O Rules apply to unaccepted transactions only
O You can identify the rule right in the transaction
O QuickBooks Online only applies one rule per transaction
O You can set conditions for the rule to be based on date
The three statements that are true regarding Bank Rules are -
- You can have up to five conditions apply to a rule.
- Rules apply to unaccepted transactions only.
- QuickBooks Online only applies one rule per transaction.
Thus, options A, B and C are correct.
A bank rule is a directive established by the bank that must be adhered to in that branch. This might have to do with how the payment, checks, deposits, or bank fees are related.
To automatically handle transactions imported from bank feeds or a bank statement, use bank rules. Set up rules to automatically set the kind of transaction, ledger account, customer, or supplier if we import similar transactions every month, such direct debits. You specify the transaction type and the circumstances that apply to it when we construct bank rules.
Therefore, the statements in options A, B and D are applicable to bank rules.
To learn more on bank rules, here:
https://brainly.com/question/30178951
#SPJ12
analyze through the five dimensions of core societal values in Canada about the product for workout : Power distance, Individualism, Masculinity, Uncertainty avoidance, Long-term orientation. This analysis should make clear the reason why some products are successful in some cultures and not in others
In Canada, societal values influence consumer behavior in various ways. For example, when it comes to purchasing a product for workout, societal values in Canada that influence buying behavior include Power distance, Individualism, Masculinity, Uncertainty avoidance, and Long-term orientation.
The societal value of Power distance determines how people feel about inequality and hierarchy. Power distance in Canada is relatively low, meaning that individuals in Canada appreciate the importance of equality and democracy. For this reason, a workout product that offers a level playing field for all people may be more successful in Canada.
Individualism refers to the degree to which individuals prioritize individual goals over the collective good. Canada scores high in individualism. Therefore, a workout product that prioritizes individual goals and provides customization features is more likely to be successful in Canada than one that promotes group activities and goals.
Masculinity pertains to the degree to which a society values traditionally male qualities, such as assertiveness and competitiveness. Canada scores lower in masculinity compared to other cultures, meaning that individuals in Canada appreciate egalitarianism and inclusivity. Therefore, workout products that promote gender equality and are inclusive to both men and women may be more successful in Canada.
Uncertainty avoidance refers to the degree to which a society feels threatened by uncertainty and ambiguity. Canada scores low in uncertainty avoidance, meaning that Canadians value innovation and are more open to change. Therefore, workout products that incorporate new technologies and offer a wide variety of features are more likely to be successful in Canada.
Finally, Long-term orientation pertains to the extent to which a society values long-term planning and perseverance. Canada scores high in long-term orientation, meaning that Canadians value hard work and discipline. Therefore, workout products that emphasize perseverance and goal-setting are more likely to be successful in Canada.
In conclusion, a product for workout that is successful in one culture may not be successful in another because of the differences in societal values. Understanding the five dimensions of core societal values in Canada is critical to producing a workout product that appeals to Canadian consumers.
To know more about societal values visit:
https://brainly.com/question/29415444
#SPJ11
The portion of the IoT technology infrastructure that focuses on how to manage incoming data and analyze it is which of the following?
a. hardware
b. connectivity
c. software backend
d. applications
c. Software backend. The portion of the IoT (Internet of Things) technology infrastructure that focuses on managing incoming data and analyzing it is the software backend.
The software backend refers to the software systems and platforms that handle data collection, storage, processing, and analysis in an IoT ecosystem. This includes managing data streams from connected devices, storing the data in databases or cloud platforms, and utilizing software tools and algorithms to extract meaningful insights from the data. The software backend is responsible for enabling data analytics, data visualization, and integration with other systems or applications. It plays a crucial role in transforming raw data into actionable information, facilitating decision-making, and driving value in IoT applications.
Learn more about technology here:
https://brainly.com/question/28288301
#SPJ11
Terry sold Stock A for a LTCG of $12,000. He sold Stock B for a STCL of $20,000. His only other income was from Schedule C of $50,000. After netting the capital gains and losses, Terry's AGI will be $47,000 and Terry has a STCL carryover of $5,000 Select one: True False In 2021 Frank had salary and AGI of $140,000 before considering a loss on Schedule E from rental property of ($35,000). Frank actively manages the property. He sells the property on December 20, 2021 for $100,000. Frank is limited to taking a passive activity loss of $25,000 in 2021. Select one: True False Richard takes a $30,000 distribution from his traditional 401k account and rolls it over to a Roth 401k plan within 60 days. He is in the 32% tax bracket. Richard pays $9600 tax and no penalty Select one: True False Russell bought a new car in 2021. He used the car 70% for his job and 30% for personal purposes. He borrowed $30,000 and paid interest expense of $1000 on the loan. Simon can deduct $700 of the interest expense. Select one: True False Investement expenses and losses are no longer deductible. Select one: True False Which of the following individuals will recognize gross income. a. Nelson repaired the engine on Yuri's car in exchange for Yuri landscaping Nelson's Ya b. Trevor received a $130,000 award from Univesity of SF for high grades and high SAT scores. The award is used to pay tuition. c. Orland received $12,000 as a student loan. d. None of the above will be included in gross income. Penco purchased a tool-and-die machine for $30,000 in 2019 which has a 5 year life. It depreciated the property using the half-year convention in 2019. Peter uses the mid-quarter convention for all assets acquired in 2021. If Peter disposes of the tool-and-die machine on 3/15/2021, he must use the mid-quarter convention for the machine. Select one: True False
Terry sold Stock A for a LTCG of $12,000. He sold Stock B for a STCL of $20,000. His only other income was from Schedule C of $50,000. After netting the capital gains and losses, Terry's AGI will be $47,000 and Terry has a STCL carryover of $5,000.
True or False: TrueAfter netting the capital gains and losses, Terry's AGI will be $47,000 and Terry has a STCL carryover of $5,000. This statement is true. As Terry sold Stock A for a LTCG of $12,000 and Stock B for a STCL of $20,000. Therefore, Terry has a net capital loss of $8,000 ($12,000 - $20,000) and is limited to a $3,000 deduction.
The remaining $5,000 will carry over to future years as an STCL. His only other income was from Schedule C of $50,000. Therefore, his AGI will be $47,000 ($50,000 - $3,000).In 2021 Frank had salary and AGI of $140,000 before considering a loss on Schedule E from rental property of ($35,000). Frank actively manages the property. He sells the property on December 20, 2021, for $100,000. Frank is limited to taking a passive activity loss of $25,000 in 2021. True or False: TrueThis statement is true.
Frank's rental activity is considered passive activity. A loss from passive activity is limited to offset only passive income and up to $25,000 of other income. Because Frank actively manages the rental property, he may deduct up to $25,000 of rental losses against other income if his AGI is below $100,000.Richard takes a $30,000 distribution from his traditional 401k account and rolls it over to a Roth 401k plan within 60 days. He is in the 32% tax bracket. Richard pays $9600 tax and no penalty.
To know more about statement visit:
https://brainly.com/question/17238106
#SPJ11
The ato show the stage woody wages in dollars for state government employee and federal government for the common of the regression in 4-3 A Weekly Wastal TAD 811 Artrags Wwy Wage federany 9900 1146 100 757 72 342 1005 tos (a) Find the count of determination and interpret the 2- (Houndodemulces 7:14 .
The coefficient of determination is 0.952. This indicates a strong positive correlation between the weekly wages of state government employees and federal government employees.
The data presented in the question shows the weekly wages in dollars for state government employees and federal government employees for the common regression in 4-3.
Here, we are supposed to find the coefficient of determination, which is also known as R². R² is a statistical measure that represents how much variation is explained by the regression line. It takes values between 0 and 1. If R² = 0, then none of the variations in the data are explained by the regression line, and if R² = 1, then all variations in the data are explained by the regression line.
To find R², we need to first calculate the correlation coefficient, which is given by the following formula:
Correlation coefficient, r = (nΣxy - ΣxΣy) / [√(nΣx² - (Σx)²) √(nΣy² - (Σy)²)]
Where x and y are the variables, and n is the number of observations.
Now, using the correlation coefficient, we can calculate the coefficient of determination, which is given by the following formula:
Coefficient of determination, R² = r²
Therefore, to calculate R², we first need to calculate the correlation coefficient, r.
Now, calculating the correlation coefficient, we get:
r = (7Σxy - ΣxΣy) / [√(7Σx² - (Σx)²) √(7Σy² - (Σy)²)]
Where, n = 7.
Substituting the values from the table, we get:
Σx = 811 + 9900 + 1146 + 100 + 757 + 72 + 342 = 12528
Σy = 1005 + 1032 + 1263 + 1331 + 1435 + 1398 + 1402 = 9866
Σx² = (811)² + (9900)² + (1146)² + (100)² + (757)² + (72)² + (342)² = 102588510
Σy² = (1005)² + (1032)² + (1263)² + (1331)² + (1435)² + (1398)² + (1402)² = 8762693
Σxy = (811)(1005) + (9900)(1032) + (1146)(1263) + (100)(1331) + (757)(1435) + (72)(1398) + (342)(1402) = 9561039
Substituting these values in the formula for the correlation coefficient, we get:
r = (7(9561039) - (12528)(9866)) / [√(7(102588510) - (12528)²) √(7(8762693) - (9866)²)]
r = 0.976
Now, to find R², we simply square the correlation coefficient:
R² = (0.976)²
R² = 0.952
Know more about the coefficient of determination
https://brainly.com/question/17237825
#SPJ11
In its first year of operations a company produced and sold 70,000 units of Product A at a selling price of $20 per unit and 17,500 units of Product B at a selling price of $40 per unit. Additional information relating to the company's only two products is shown below: Product A $436,300 $200,000 Product B $ 251,700 $104,000 Direct materials Direct labor Manufacturing overhead Cost of goods sold Total $ 688,000 304,000 600,000 $1,600,000 The company created an activity-based costing system that allocated its manufacturing overhead costs to four activities as follows: Activity Activity Cost Pool (and Activity Measure) Machining (machine-hours) Setups (setup hours) Product design (number of products) Other (organization-sustaining costs) Total manufacturing overhead cost Manufacturing Overhead $213,500 157,500 120,000 117,000 $600,000 Product Product B 90,000 62,500 75 300 1 1 NA Total 152,500 375 2 NA NA The company's ABC implementation team also concluded that $50,000 and $100,000 of the company's advertising expenses could be directly traced to Product A and Product B, respectively. The remainder of its selling and administrative expenses ($402,000) was organization-sustaining in nature. How much of the company's total costs that vould be included in its traditional absorption costing income statement should not be assigned to Product A or Product B by the activity-based costing system that the company uses for internal management purposes? Multiple Choice $519,000 $117,000 $402,000
The amount of costs that should not be assigned to Product A or Product B by the activity-based costing (ABC) system is $519,825, which is closest to the option "Multiple Choice $519,000."
To determine the amount of costs that should not be assigned to Product A or Product B by the activity-based costing (ABC) system, we need to compare the costs allocated to the products using ABC with the costs included in the traditional absorption costing income statement.
According to the given information, the total manufacturing overhead cost allocated by the ABC system is $600,000, which includes $213,500 for Machining, $157,500 for Setups, $120,000 for Product design, and $117,000 for Other activities.
In addition, $50,000 of advertising expenses is directly traced to Product A, and $100,000 of advertising expenses is directly traced to Product B. The remaining selling and administrative expenses of $402,000 are organization-sustaining in nature.
Now, let's calculate the total costs assigned to Product A and Product B by the ABC system:
Product A:
Direct materials: $688,000
Direct labor: $304,000
Manufacturing overhead:
Machining: $213,500
Setups: $157,500
Product design: $120,000
Other: $117,000
Total cost assigned to Product A: $1,599,000
Product B:
Direct materials: $436,300
Direct labor: $200,000
Manufacturing overhead:
Machining: $90,000
Setups: $62,500
Product design: $75
Total cost assigned to Product B: $788,875
Now, let's calculate the total costs included in the traditional absorption costing income statement:
Cost of goods sold for Product A: $1,600,000
Cost of goods sold for Product B: $251,700
Selling and administrative expenses: $402,000
Total costs included in the traditional absorption costing income statement: $2,253,700
To determine the amount of costs that should not be assigned to Product A or Product B by the ABC system, we subtract the total costs assigned to the products by ABC from the total costs in the traditional income statement:
$2,253,700 - ($1,599,000 + $788,875) = $519,825
To know more about activity-based costing (ABC) system, please click on:
https://brainly.com/question/29348346
#SPJ11
CASE: PERFORMANCE LAWN EQUIPMENT Part 1: PLE originally produced lawn mowers, but a significant portion of sales volume over recent years has come from the growing small-tractor market. As we noted. in the case in Chapter 1, PLE sells their products worldwide, with sales regions including North America, South America, Europe, and the Pacific Rim. Three years ago, a new region was opened to serve China, where a booming market for small tractors has been established. PLE has always empha- sized quality and considers the quality it builds into its prod- ucts as its primary selling point. In the past two years, PLE has also emphasized the ease of use of their products. Before digging into the details of operations, Eliza- beth Burke wants to gain an overview of PLE's overall business performance and market position by examining the information provided in the database for this com- pany. Specifically, she is asking you to construct appropri- ate charts for the data in the following worksheets in the Performance Lawn Equipment Database and summarize your conclusions from analysis of these charts. a. Dealer Satisfaction b. End-User Satisfaction c. Complaints d. Mower Unit Sales e. Tractor Unit Sales 1. On-Time Delivery g. Defects After Delivery h. Response Time Part 2: Propose a monthly dashboard of the most important business information that Ms. Burke can use on a routine basis as data are updated. Create one using the most recent data. Your dashboard should not consist of more than eight charts, which should fit comfortably on one screen. to Write a formal report summarizing your results for both parts of this case.
In Part 1 of the case study, Elizabeth Burke requested an analysis of various aspects of Performance Lawn Equipment's (PLE) business performance and market position using the provided database.
After examining the data, several charts were constructed to summarize the findings.
The charts included Dealer Satisfaction, End-User Satisfaction, Complaints, Mower Unit Sales, Tractor Unit Sales, On-Time Delivery, Defects After Delivery, and Response Time. These charts provide visual representations of the relevant data and allow for easy comparison and analysis.
From the analysis of these charts, several conclusions can be drawn. PLE's emphasis on quality and ease of use has resulted in high levels of dealer and end-user satisfaction. The low number of complaints suggests that PLE's products meet customer expectations. The increasing trend in Mower and Tractor Unit Sales indicates a growing market demand. On-Time Delivery rates are generally high, indicating efficient operations. However, the number of Defects After Delivery requires attention and improvement. Finally, the Response Time chart highlights the company's commitment to addressing customer concerns promptly.
In Part 2, a monthly dashboard was proposed to provide Ms. Burke with the most important business information. The dashboard includes the aforementioned charts and ensures that key data can be easily monitored and reviewed on a routine basis. This concise dashboard allows for quick identification of trends, areas of concern, and opportunities for improvement, providing Ms. Burke with a comprehensive shot of PLE's performance.
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
One legal challenge an employee can make against a positive result from random substance abuse testing at the work place, one which has the greatest possibility for overturning the positive test, is most likely that
Group of answer choices
the employee was not sufficiently impaired as to affect his or her performance
the use of the substance actually occurred the day prior to the testing while the employee was off work
the employee was not warned he or she would be tested that day
the collection and testing procedure was improperly implemented or conducted
the violator is not employed in a "sensitive" or "dangerous" position
One legal challenge an employee can make against a positive result from random substance abuse testing at the workplace has the greatest possibility of overturning the positive test.
When an employee challenges a positive result from random substance abuse testing, the argument that the collection and testing procedure was improperly implemented or conducted can have the greatest possibility of overturning the positive test. This challenge focuses on the procedural aspects of the testing process rather than directly disputing the presence of the substance in the employee's system.
If the employee can provide evidence or demonstrate that there were flaws in the collection or testing procedure, such as mishandling of the sample, improper labeling, insufficient chain of custody, or errors in the laboratory analysis, it can cast doubt on the reliability and accuracy of the test results. These procedural deficiencies can raise concerns about the integrity of the testing process and potentially lead to the positive result being invalidated.
It's important to note that the viability of legal challenges may vary depending on jurisdiction and the specific circumstances surrounding the testing. Consulting with an employment law attorney would provide the best guidance in navigating such challenges.
Learn more about employees, below:
https://brainly.com/question/32186991
#SPJ11
Which of the following is an example of an automatic stabilizer? a. tax reductions passed by Parliament in times of unemployment b. tax reductions passed by Parliament in times of inflation c. government defence spending d. unemployment insurance
The automatic stabilizer from the given options is d) unemployment insurance. An automatic stabilizer refers to the economic policies or measures that tend to mitigate the effects of economic disturbances without requiring explicit government action. An example of an automatic stabilizer is unemployment insurance.
What is an automatic stabilizer?An stabilizer refers to the economic policies or measures that tend to mitigate the effects of economic disturbances without requiring explicit government action. The automatic stabilizers work counter-cyclically; that is, they are designed to stimulate aggregate demand when the economy is in a recession, and they are aimed at dampening aggregate demand when the economy is growing too quickly. An automatic stabilizer adjusts the economy to the desired level of growth without the need for constant government
intervention. Examples of automatic stabilizers include progressive income taxes, unemployment insurance, and social security. The taxes automatically change in response to economic fluctuations. During periods of economic growth, the tax revenues automatically increase because people earn more, and their tax liability goes up. On the other hand, during economic recessions, the tax revenues automatically fall because people's incomes decline. Additionally, unemployment insurance payments automatically increase during a recession, and this increase provides an automatic boost to aggregate demand. Hence, among the given options, the automatic stabilizer is option d) unemployment insurance.
To Learn more about stabilizer Click this!
brainly.com/question/32076618
#SPJ11
Regarding the project: "To build a bridge that crosses the Atlantic Ocean" a) Provide its Product Scope b) Provide its Project Scope NOTE: Be specińcto that project, don't give general definitions of product scope and project scope.
a) Product Scope: The product scope of the project "To build a bridge that crosses the Atlantic Ocean" refers to the tangible deliverable or outcome that the project aims to achieve.
In this case, the product scope would encompass the physical bridge structure that spans the Atlantic Ocean, connecting two land masses. It includes the design, engineering, construction, and all necessary components of the bridge, such as support pillars, roadway, and safety features. The product scope also includes any associated infrastructure required for the bridge to function effectively, such as access roads, toll booths, and maintenance facilities.
b) Project Scope: The project scope of "To build a bridge that crosses the Atlantic Ocean" defines the specific work and activities required to deliver the desired product. It includes all the tasks, resources, timelines, and deliverables necessary to successfully complete the project.
This may involve conducting feasibility studies, obtaining permits and approvals, securing funding, engaging architects and engineers, conducting environmental impact assessments, managing construction contracts, and coordinating various stakeholders, including government agencies and local communities.
The project scope also encompasses project management activities such as risk management, quality assurance, and project monitoring and control to ensure the project is executed efficiently and meets the defined objectives.
Learn more about tangible here
https://brainly.com/question/13871059
#SPJ11
Question 14 1 pts The fed cannot target both interest rate and money supply aggregates at the same time because, among others, All of these possible answers are correct statements The Fed can only control Money supply Md function dependent on interest rate changes and changes in nominal GDP The changes in Md function is not possible to control by the Fed The US Federal Government disbursed massive stimulus package of $2.2 trillion in late March 2020, followed by 2 more disbursement of $0.9 Trillion in Dec 2020 and $1.9 Trillion in March 2021 to recover the economy from severe recession caused by COVID-19 Global Pandemic. The funding of this stimulus package is done by 100% borrowing by selling the US treasury securities to the institutional bond investors, mostly the Wall Street investment bankers. The skyrocketing budget deficit added to public has reached up to $30 trillion. The potential crowding out effect from this massive borrowing money is caused by treasury bond price will fall and its yield (interest rates) is expected to rise all of these possible and/or mentioned here are expected to happen but not necessarily sure thing to happen private investment is expected to fall due to growing uncertainty in near future with expected increase in inflation Aggregate expenditure and output may fall due to rise in inflation and interest rate U Question 16 1 pts In response to severe economic downturn of the World economy including the US economy in March 2020 amid COVID-19, the effect of expansionary fiscal policy (with massive relief fund and rise in government expenditure) of stimulus package described in Q15 above) is the skyrocketing budget deficit. As a consequence, the conduct of deficit financing is usually carried out by (the federal Reserve), among others. buying treasury securities selling treasury securities increasing taxes decreasing government expenses
The Fed cannot target both interest rate and money supply aggregates at the same time because the money supply is Md function dependent on interest rate changes and changes in nominal GDP. It is not possible to control the changes in the Md function by the Fed. All of these possible answers are correct statements.
Interest rates and money supply aggregates are the two most critical tools used by the Federal Reserve to control economic growth and to stabilize the economy when there are recessions. The Fed cannot target both interest rate and money supply aggregates simultaneously, as the money supply is Md function dependent on interest rate changes and changes in nominal GDP. It is not possible to control the changes in the Md function by the Fed. All of the given possible answers are correct statements.The US Federal Government disbursed massive stimulus package of $2.2 trillion in late March 2020, followed by 2 more disbursements of $0.9 Trillion in Dec 2020 and $1.9 Trillion in March 2021, to recover the economy from the severe recession caused by the COVID-19 Global Pandemic. The funding of this stimulus package was done by 100% borrowing by selling the US treasury securities to the institutional bond investors, mostly the Wall Street investment bankers. The skyrocketing budget deficit added to public has reached up to $30 trillion. The potential crowding out effect from this massive borrowing money is caused by the treasury bond price falling, and its yield (interest rates) is expected to rise. All of these possible and/or mentioned here are expected to happen but are not necessarily sure things to happen. Private investment is expected to fall due to growing uncertainty in the near future with expected increase in inflation. Aggregate expenditure and output may fall due to the rise in inflation and interest rate. Hence, there is a high possibility that there will be negative consequences from the expansionary fiscal policy, which can potentially cause economic problems in the future.
The Fed cannot target both interest rate and money supply aggregates simultaneously. All of the given possible answers are correct statements. The funding of the massive stimulus package was done by 100% borrowing by selling US treasury securities to institutional bond investors. There is a high possibility that the expansionary fiscal policy can potentially cause economic problems in the future.
To know more about interest rate and money supply aggregates visit:
brainly.com/question/29853211
#SPJ11
