The inductors coil's resistance ("R") is the DC resistance value of the copper twists or loops that make up the coil.
Why does resistance exist?When electrons pass through a conductors, such a metal wire, an electric current occurs. The ions inside the metal may clash with the travelling electrons. Resistance is created as a result, making it more challenging for the flow of the current.
How is resistance measured?By utilizing Ohm's Law to measure the current and voltage, resistance may be computed. As a result, if the observed current and voltage values are known, the resistance value of a circuit may be calculated. Ohm's Law is the measurement principle used by analog and digital multimeters to measure resistance.
To know more about resistance visit:
https://brainly.com/question/29427458
#SPJ4
A bicycle is traveling at 15 miles per hour. How many feet will it cover in 100 seconds?.
Answer:
2200 ft
Explanation:
This is a dimensional analysis question.
First, convert 15 miles to feet.
[tex]15 mi(\frac{5,280ft}{1mi})=79200ft[/tex]
Then, convert hours to seconds.
[tex]1 hr(\frac{3600s}{1hr})=3600s[/tex]
Then, use those values to rewrite [tex]\frac{m}{hr}[/tex] as [tex]\frac{ft}{s}[/tex]
[tex]\frac{79200ft}{3600s}=22\frac{ft}{s}[/tex]
Finally, multiply [tex]\frac{ft}{s}[/tex] by the target time in seconds
[tex]22\frac{ft}{s}(100s)=2200ft[/tex]
alpha particles are emitted in nuclear decay processes with typical energies of 5 mev. in analogy with example 4.9, determine the range of kinetic energies of an alpha particle trapped in a nucleus-sized region and deduce whether the alpha particle can exist inside the nucleus.
The range of kinetic energies of an alpha particle is 2.5 MV
The energy of alpha particle is E=4.8MeV
For alpha particles,
⇒ E = 2eV
⇒ V = 2eE
V = (5 × 10⁶ × 1.6 × 10⁻¹) ÷ (2(1.6 × 10⁻¹⁹))
V = (5 × 10⁶) ÷ 2
V = 2.5 × 10⁶
⇒ V = 2.5 MV
What is alpha particle?The composite alpha particle is made up of two protons and two neutrons that are firmly bonded together. They are released from the nucleus of some radionuclides during an alpha-decay process, a kind of radioactive decay.
know more about nucleus:
brainly.com/question/26226232
#SPJ4
Strontium forms a face centered cubic unit cell and has a density of 2. 64 g/cm3. What is the radius of a strontium atom?.
Strontium forms a face centered cubic unit cell and has a density of [tex]2.64g/cm^{3}[/tex]. The radius of a strontium is [tex]2.136 x 10^{-8}[/tex] cm.
In physics, how is density used?Density provides an easy way to calculate a body's mass from its volume or vice versa; the mass is equal to the volume multiplied by the density (M = Vd), and the volume is equal to the mass divided by the density (V = M/d).
The structure of strontium (Sr) is similar to that of FCC. In FCC, the relationship between edge length and atomic radius is 2-a=4r2a=4r because unit cell atoms are present in the cube's corner and face centres. In this question, we are given an atomic radius and must calculate the edge length.
Here r=215pmr=215pm so a=4×2152–√=608.2pma=4×2152=608.2pm.
To know more about density visit:
brainly.com/question/952755
#SPJ4
As the cloud shrinks in size, its central temperature _______ as a result of _______.
Blank 1: increases
Blank 2: gravitational potential energy being converted to thermal energy
As the cloud shrinks in size, its gravitational potential energy decreases. Because energy cannot simply disappear, the "lost" gravitational potential energy must be converted into some other form. Some of it is converted into thermal energy, which raises the temperature of the gas cloud. The rest is mostly converted into radiative energy, which is released into space as light.
As the cloud shrinks in size, its central temperature increases as a result of gravitational potential energy decreases.
Temperature is the measure of hotness or coldness expressed in phrases of any of several scales, together with Fahrenheit and Celsius. Temperature indicates the path in which warmness electricity will spontaneously drift—i.e., from a warmer frame (one at a better temperature) to a chillier frame (one at a decreased temperature).
In chemistry, we define the temperature of a substance as the common kinetic power of all of the atoms or molecules of that substance. now not all the debris of a substance has identical kinetic energy. At any given time, the kinetic power of the debris can be represented by means of a distribution.
Learn more about Temperature here:
https://brainly.com/question/2339046
#SPJ4
what is the maximum wavelength of light (in nanometers) that would produce an output from a photovoltaic device manufactured from a semiconductor with an energy gap of 1.02 ev?
The maximum wavelength of light that would produce an output from a photovoltaic device manufactured from a semiconductor with an energy gap of 1.02 eV is 121 nanometer.
Given,
Energy gap = 1.02 eV
Wavelength = ?
We know that,
Speed of light, c, is given as 3 * 10⁸
Planck's constant, h, = 6.626 * 10⁻³⁴
Charge on photons = 1.602 * 10⁻¹⁹
To calculate the maximum wavelength of light we will use a formula of Einstein's equation
Mathematically, Einstein's equation for photon energy is given by this formula:
E = hf = hc/λ
Where:
E is the energy.
h is Plank's constant.
λ is the wavelength.
c is the speed of light.
To find wavelength using the above formula
λ = hc/E
Now, substituting the values, we get
λ = (6.626 * 10⁻³⁴)(3 * 10⁸) / (1.02)(1.602 * 10⁻¹⁹)
λ = 1.21 * 10⁻⁷ m
In 1 nanometer we have 10⁻⁹ m
λ = 121 nm
Therefore, the maximum wavelength of light that would produce an output from a photovoltaic device manufactured from a semiconductor with an energy gap of 1.02 eV is 121 nm.
To know more about wavelength, refer: https://brainly.com/question/9583725
#SPJ4
a boy of mass 43.2 kg runs and jumps onto a stationary skateboard. The boy lands on the skateboard with a horizontal velocity of 4.10 m/s. The skateboard has a mass of 2.50 kg.
Using ideas about conservation of momentum,calculate the combined velocity of the boy and skateboard just after the boy lands on it.
(Pls explain. I've got my physics exams very soon)
The combined velocity of the boy and the skateboard just after the boy lands on it is 3.88 m/s.
What is velocity?Velocity can be defined as the rate of change of displacement.
To calculate the velocity of the boy and the skateboard just after the boy lands on it, we use the formula below.
Formula:
V = Mu/(m+M)............. Equation 1Where:
V = Velocity of the boy and the skatebaordM = Mass of the boym = Mass of the skateboardu = Initial velocity of the boy.From the question,
Given:
M = 43.2 kg m = 2.5 kgu = 4.1 m/sSubstitute these values into equation 1
V = (43.2×4.1)/(43.2+2.5)V = 3.88 m/sHence, the velocity of the boy and the skateboard is 3.88 m/s.
Learn more about velocity here: https://brainly.com/question/24445340
#SPJ1
a car is moving toward the east at 50 km/h while it also moves to the north at 25 km/h . how fast is the car traveling?
The car is travelling at 56km/h.
Calculation:
Given:
Velocity of car in east ([tex]V_{e}[/tex])= 50 km/h
Velocity of car in north ([tex]V_{n}[/tex]) = 25km/h
So, [tex]V_{net}[/tex] = [tex]\sqrt{Ve^{2} + Vn^{2} }[/tex] = [tex]\sqrt{50^{2} + 25^{2} }[/tex]
= [tex]\sqrt{2500 + 625}[/tex]
= [tex]\sqrt{3125}[/tex] = 55.9 kn/h
= 56km/h
The car is travelling at 56km/h.
What is Velocity?
A vector measurement of the speed and direction of motion is what is meant by the term "velocity." Simply put, velocity is the rate of movement in one direction. Velocity may be used to calculate both the speed of a rocket launching into space and the speed of a car traveling north on a busy motorway.
To know more about Velocity, check out https://brainly.com/question/24445340
#SPJ4
what is the minimum velocity necessary to throw a ball 100 feet high? how long does does it take the ballt o reach 100 feet
It takes 2.49 seconds for the ball to reach 100 feet of height.
What does velocity vs. speed mean?In contrast to speed, velocity describes the rate and direction of an object's motion along a path. In other words, speed is a scalar quantity while velocity is a vector.
Simply put, velocity is the rate of motion of an object in a specific direction. Using a car driving north on a highway as an example, or a rocket after it has launched, as an example of speed. Scalar implies that the velocity vector's absolute value magnitude will always equal the motion's speed.
Using equation,
100 feet = 30.48m
v² = u² + 2as
v² = 0+2×9.8×30.48
v² = 597.40
v = 24.44m/s
v= u +at
24.44 = 0+9.8t
t = 24.44/9.8
t =2.49seconds.
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ1
A sample of helium gas in a balloon is compressed from 5. 26 l to 3. 78 l at constant temperature. If the initial pressure was 4. 39 atm, what is the new pressure?.
Answer:
[tex]P_2=3.79atm[/tex]
Explanation:
According to Boyle's Law:
[tex]P_1V_1=P_2V_2[/tex]
Rewriting to find [tex]P_2[/tex]:
[tex]P_2=\frac{P_1V_1}{V_2}[/tex]
[tex]P_1=4.39atm\\V_1=5.26L\\V_2=3.78\\P_2=\frac{(4.39atm)(3.26L)}{3.78L}\\P_2=3.7861atm[/tex]
This answer follows Boyle's statement that pressure is inversely proportional to volume (V∝[tex]\frac{1}{P}[/tex]). As the volume decreases, the pressure must proportionately increase.
If the work required to peed up a car from 10km/hr to 2okm/hr i 5. 0 x 10^3 J, what would be the work required to increae the car peed from 20km/hr to 30km/hr
The minimum distance in which car will stop is 256m.
What is distance?
distance is the length of the space between two points.
distance is a numerical or its the occasionally qualitative measurement of how to far apart objects or points .
Sol-here we can apply Newton’s second law to the car of to determine of the maximum static friction to the force acting on the car:
€Fy=ma^y+ n-mg=0
Fs≤us mg
This maximum magnitude of static friction acts so long as the tires roll without skidding.
€Fx=ma^x-----> -fs=ma
The maximum acceleration is
a=-u^s g
The initial and final conditions are- xi=0, vi=50.0mi/h =22.4 m/s and vf =0.Then,
v^2=v^2+2a(xf-xi)---->v^2
f i I
Xf=(22.4m/s)^2/2(0.100)(9.80m/s^2)=256
Thus through the minimum distance in which car will stop is 256m.
To know more about distance click -
https://brainly.com/question/23848540
#SPJ4
Astronomers now know that surrounding the main body of our galaxy (which our various kinds of telescopes have shown to us) and our fainter halo of stars there is:________.
Astronomers now know that surrounding the main body of our galaxy (which our various kinds of telescopes have shown to us) and our fainter halo of stars there is: a spherical halo of dust and gas.
What is milky way?
There are many stars, grains of dust, and gas in the Milky Way. It is known as a spiral galaxy because, from the top or bottom, it would appear to be whirling like a pinwheel. About 25,000 light-years from the galaxy's nucleus, the Sun is situated on one of the spiral arms. The Milky Way's center would take you about 25,000 years to reach, even if you could move at the speed of light (300,000 km/s, or 186,000 mph).
Learn more about Milky Way here:
https://brainly.com/question/2806083
#SPJ1
It takes the elevator in a skyscraper 4. 0 s to reach its cruising speed of 10 m/s. A 60 kg passenger gets aboard on the ground floor.
Before the elevator starts moving, the weight is 588 N; during acceleration, it is 738 N; and at cruising speed, it is 588 N.
State A: Just before the elevator moving.
At first, the 60 kg passenger's weight equals (60 kg)*(9.8 m/s2) = 588 N.
The elevator speeds up from state A to state B
Between states A and B, there is an acceleration of
a=10 m/s/(4 s) = 2.5 m/s2
The passenger is subjected to an inertial force of (60 kg)*(2.5 m/s2) = 150 N.
The passenger's actual weight is 588 + 150, which is 738 N.
Following state B: dynamic stability
Following state B, the elevator runs continuously while the passenger is in a condition of dynamic balance.
Thus, the weight of the passenger is 588 N.
Before the elevator starts moving, the weight is 588 N; during acceleration, it is 738 N; and at cruising speed, it is 588 N.
To read more about weights, visit https://brainly.com/question/14476038
#SPJ4
Complete Question :
It takes the elevator in a skyscraper 4.0 s to reach its cruising speed of 10 m/s. a 60 kg passenger gets aboard on the ground floor. determine the passenger's weight, before the elevator starts moving, while the elevator is speeding up, and after the elevator reaches its cruising speed.
A solid cylinder of mass m and radius R has a string wound around it. A person holding the string pulls it vertically upward, as shown, such that the cylinder is suspended in midair for a brief time interval Δt and its center of mass does not move. The tension in the string is T, and the rotational inertia of the cylinder about its axis is ½ MR2.
1. The net force on the cylinder during the time interval Δt is
A: T-mgR
B: mgR-T
C: mg
D: zero
The linear acceleration of the person's hand during the time interval Δt is
A: 2g
B: T/m-g
C: T/m
D: g/2
(1) The net force on the cylinder during the time interval Δt is zero.
option D is the correct answer.
(2) The linear acceleration of the person's hand during the time interval Δt is a = T/m - g
option B is the correct answer.
What is the net force on the cylinder during the time interval Δt?
The net force on the cylinder during the time interval Δt is determined by summing all the forces acting on the cylinder at the given time interval.
F(net) = upward force - downward force
F(net) = T - W
F(net) = T - mg
where;
T is the tension in the string pulled upwardW is the weight of the cylinder acting downwardm is the mass of the cylinderg is acceleration due to gravityIf the cylinder is suspended in mid air for a brief time interval Δt and its center of mass does not move, then the net force must be equal to zero.
F(net) = T- mg = 0
The linear acceleration of the person's hand during the time interval Δt is calculated as follows;
T - mg = ma
mg + ma = T
ma = T - mg
a = (T - mg)/m
a = T/m - mg/m
a = T/m - g
Learn more about linear acceleration here: https://brainly.com/question/15411328
#SPJ1
What i the wavelength of an electromagnetic wave that ha a frequency of 60,000,000 Hz)
The wavelength is 5.666m.
What is wavelength?
The separation between any two points in a wave and those same points in the subsequent wave cycle. This can be from crest to crest, from trough to trough, from null to null, etc.
What is electromagnetic wave?
The vibrations between an electric field and a magnetic field produce electromagnetic waves, often known as EM waves. In other words, electromagnetic waves are created when magnetic and electric fields oscillate.
Frequency =60,000,000 Hz. As the speed of sound in air = 340 m/s, therefore, wavelength = speed/frequency = 340/60,000,000 = 5.666m.
Therefore, wavelength is 5.666m.
Learn more about wavelength from the given link.
https://brainly.com/question/10750459
#SPJ4
what is the total work wfric done on the block by the force of friction as the block moves a distance 7.00 m up the incline?
The block's kinetic energy remains unchanged because it is travelling at a constant pace.
Work is the change in kinetic energy, and since there has been no change, there has been no work done on the block.
What Is Work?
A force must be applied in order to produce work, and there must also be motion or displacement in the force's direction.
The amount of work performed by a force acting on an item is equal to the force's magnitude times the distance travelled in the force's direction.
What is the formula for work done?
The work W is equal to the force f multiplied by the distance d, or W = fd, to mathematically describe this idea.
The work done is given by W = fd cos if the force is applied at an angle of to the displacement.
Therefore, here, the total work will be the product of the frictional force and distance that is 7m.
To learn more about work refer : brainly.com/question/25573309
#SPJ4
using this information, determine the moment of inertia i of the wheel about its axle. please be sure your work is clear. [hint: various unit conversions need to be done before you can do numerical calculations
The supplied statement indicates the wheel's rotational angular velocity.
What, for example, is velocity?The rate at which something goes in one direction or another is referred to as its velocity. as swiftly as a car traveling north on a highway or the speed of a rocket taking flight. The magnitude of the velocity vector's absolute value will always be equal to the motion's speed because it is a scalar.
Can velocity reverse itself?An object's velocity is the rate at which its position changes over time (displacement). While velocity, which incorporates both speed and direction, can be either favorable or unfavorable, speed can only be good.
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
a resistor is connected in series with a capacitor. when a power source is applied to the resultig circuit, the capacitor is considered to befully charged after a time period equal to how many time constants
The time needed to fully charge the capacitor is about equal to 5 time constants, or 5T.
What is resistor and capacitor (RT) charging circuit?A resistor (R) and a capacitor (C) together form an RC charging circuit, which has characteristics that change exponentially with time. This means that the charging of a capacitor is not instantaneous since capacitors have i-v characteristics that depend on time.
What is time constant?
Any electrical or electronic circuit or system that receives a signal or voltage, whether continuous (DC) or alternating (AC), will experience some sort of "time-delay" between its input and output terminals.
Commonly referred to as the circuit's time delay or time constant, this delay shows how long the circuit takes to respond to an input voltage or signal.
If a resistor is connected in series with a capacitor to create an RC circuit, the capacitor will gradually charge through the resistor until the voltage across it equals the supply voltage.
About five time constants, are what it takes for the capacitor to fully charge.
Know more about resistor and capacitor at:
https://brainly.com/question/13592820
#SPJ4
A satellite is in orbit 35600 km above the surface of the Earth. Its angular velocity is 7.27 * 10 ^ - 5 rad/s. What is the velocity of the satellite? (The radius of the Earth is 6400 km.)
The linear velocity of the satellite at the given angular speed and position is determined as 3,053.4 m/s.
What is the linear velocity of the satellite?
The linear velocity of the satellite is calculated by applying the following equations.
v = ωr
where;
ω is the angular velocity of the satellite r is the distance of the satellite from the center of the EarthThe linear velocity of the satellite is the tangential velocity of the satellite and it is measured along the axis or circumference of the Earth.
The distance of the satellite from the center of the Earth is calculated as follows;
r = 35600 km + 6400 km
r = 42,000 km
r = 42,000,000 m
The linear velocity of the satellite is calculated as follows;
v = (7.27 x 10⁻⁵ rad/s) x (42,000,000)
v = 3,053.4 m/s
Thus, the linear velocity of the satellite depends on the angular velocity and distance.
Learn more about velocity of satellite here: https://brainly.com/question/25721729
#SPJ1
A 60 g tennis ball with an initial speed of 32 m/s hits a wall and rebounds with the same speed.The figure below shows the force of the wall on the ball during the collision. What is the value of Fmax, the maximum value of the contact force during the collision?
(img)
The value of Fmax, the maximum value of the contact force during the collision is 3.84 and fmax = 960 N.
Friction. Friction is a pressure which fits withinside the contrary path to the path of movement while an item is on a difficult surface. The most or proscribing fee of friction among surfaces is FMAX=μR F MAX = μ R wherein μ is the coefficient of friction and R is the everyday response among the 2 surfaces.
Here the mass = 60 g tennis ball
[tex]with an initial speed of 32 m/s Vc\\Pi = m×v= pf = - mv\\Δp= mv - (m)\\2mv\\2 × 0.06 × 32\\3.84\\J = 1/2 × (2 +6) ×vf max\\J / 4 = f max\\f = J/4\\J = ΔP = 960 N\\F max = 960 N[/tex]
Read more about the speed:
https://brainly.com/question/24739297
#SPJ4
an aircraft is spotted by two observers who are 1000 feet apart.as the airplane passes over the line joining them, each observer takes a sighting of the angle of elevation to the plane, as indicated in the figure. how high is the airplane?
The height of the airplane is 335.17 ft.
Let PQ be the base, AB be the vertical distance from the ground to the aircraft.
One observer is standing at P and the angle of inclination from P to A is 50°.
Another observer is standing at Q and the angle of inclination from Q to A is 25°.
We know that, PB + BQ = 1000 ft
PB = 1000 - BQ -----(1)
When we consider a triangle PAB, Tan 50° = AB/PB
AB = PB Tan 50° ------(2)
Consider the triangle ABQ, Tan 25° = AB/BQ
AB = BQ Tan 25° ------(3)
Equating (2) and (3) we have,
PB Tan 50° = BQ Tan 25° -----(4)
Substitute (1) in (4), we get,
(1000 - BQ) Tan 50° = BQ Tan 25°
1000 Tan 50° - BQ Tan 50° = BQ Tan 25°
BQ (Tan 25° + Tan 50°) = 1000 Tan 50°
BQ = 1000 Tan 50°/ (Tan 25° + Tan 50°)
BQ = 718.76 ft
PB = 1000 - 718.76 = 281.24 ft
AB = PB Tan 50° = 281.24* Tan 50° = 335.17 ft
To know more about height:
https://brainly.com/question/24263595
#SPJ4
a small grinding wheel is attached to the shaft of an electric motor which has a rated speed of 4000 rpm. when the power is turned on, the unit reaches its rated speed in 5 s, and when the power is turned off, the unit coasts to rest in 70 s. assume uniformly accelerated motion determine the number of revolutions that the motor executes (a) in reaching its rated speed, (b) in coasting to rest.
In a uniformly accelerated motion, the number of revolutions that the motor executes in reaching its rated speed will be 48000 rev/[tex]min^{2}[/tex] and in coasting to rest will be 2333 revolutions.
(a) The acceleration experimented by the grinding wheel in reaching its rated speed can be calculated as:
The number of revolution by the wheel, n = [tex]\frac{(4000 - 0) rev/min}{(5/60) min}[/tex]
So, n = 48000 rev/[tex]min^{2}[/tex]
Now, the number of revolutions completed by the grinding wheel in the period of time can be calculated as:
n = [tex]\frac{(4000^{2} rev/min) - (0^{2} rev/min)}{2. (48000 rev/min^{2}) }[/tex]
So, n = 166.66 or 167 revolutions (approximate value)
(b) The acceleration experimented the grinding wheel in coasting to rest while in a circulatory motion can be calculated as:
n = [tex]\frac{(0 - 4000) rev/min}{(70/60) min}[/tex]
So, n = - 3429 rev/[tex]min^{2}[/tex]
Now, the number of revolutions done by grinding wheel in that period of time will be:
n = [tex]\frac{(0^{2} rev/min) - (4000^{2} rev/min)}{2. (-3429 rev/min^{2}) }[/tex]
Or, n = 2333 revolutions
Hence, in reaching its rated speed the number of revolution made by the grinding wheel will be 48000 rev/[tex]min^{2}[/tex] and in coasting to rest will be 2333 revolutions.
To know more about number of revolutions by circulatory motion here:
https://brainly.com/question/16795671
#SPJ4
A steel beam hangs from a cable as a crane lifts the beam. What forces act on the beam?.
The forces that act on the beam are gravity and tension in the cable .
Gravity can be defined as the force that exists almost among all material objects that exist in the universe . Gravity is operating among objects of all sizes starting from subatomic sized particles to clusters of galaxies .It is the force that causes the free fall of an apple from the tree on the ground and also the movement of planets around the sun .
Tension can be defined as a force along the length of a medium , the force here is especially carried by a flexible medium such as a rope or a cable . The SI unit of tension is Newton per meter .
The forces that act on the beam are gravity and tension in the cable .
To know more about force checkout :
https://brainly.com/question/12970081
#SPJ4
in this problem, take atmospheric pressure to be 1.0 105 pa, and the density of water to be 1000 kg/m3. use g
Because hydrostatic pressure depends on the liquid's density and depth, the pressure at physics bottom of an element fully or partially submerged is higher than at the top.
What is an illustration of pressure?Definition of pressure: Pressure is the usual force per unit area acting on a body's surface. In other words, pressure is the distribution of force throughout a space. Examples of stress include the support provided by the air pressure in a car tire and drinking via a straw.
We measure pressure because ?The determination of a particular chemical pressure is crucial to the production process in many different industries. The consistency and quality of the product must be evaluated, thus it is essential to get exact data.
To know more about pressure visit:
https://brainly.com/question/29341536
#SPJ4
the cold water would be found . group of answer choices near the poles west side of the landmasses east side of the landmasses in the center, the center yellow dash line, the equator both a and b both c and d both a and c both b and d
The cold water would be found near the poles and west side of the landmasses.
The cold water would be found near the poles and west side of the landmasses in higher latitudes, this is due to upwelling of cold water. While warm water is found at equator region and east margin of continent in lower latitudes.
Upwelling is a process in which deep, cold water rises toward the surface. Winds blowing across the ocean surface often push water away from an area. When this occurs, water rises up from beneath the surface to replace the diverging surface water.
Therefore, the cold water would be found near the poles and west side of the landmasses.
To know more about Upwelling
https://brainly.com/question/12026041
#SPJ4
the bolts on a car wheel require tightening to a torque of 90 nm. if a 30 cm long wrench is used, what is the magnitude of the force required when the force applied at 53 degrees to the wrench?
To resolve the issue, we'll apply the moments' principle. According to the question, the wrench must exert 90 Nm of torque on the bolt. The angle at which the force acts (53o to the wrench) and the length of the lever arm (30 cm) are provided.
Before moving on to the computations themselves, a conversion. The wrench's length is specified in centimeters, which must be converted to meters:
30cm=30×10−2m=0.30m
Get an expression for the vertical component of the force now using trigonometry. The equation is Fv=Fsin53 since the vertical component is the reverse of the 53o angle.
The vertical component of the force is multiplied by the lever arm to produce the moment of the force (0.30 m).Keep in mind that the force must produce a 90 Nm torque, which I will enter on the left-hand side of the equation.
Calculation:
\s90=Fv⋅0.30=Fsin53⋅0.30
F=90sin530.30=375 N=376N, rearrange for F, and solve.
To know more about torque visit:-
https://brainly.com/question/29024338
#SPJ4
Why must microwave towers generally be spaced no more than 30 miles apart to ensure the transmitter and receiver are able to have line-of-sight of each other?.
The distance between stations can only be greater than the visual horizon, or between 30 and 50 miles, due to the requirement of a line of sight (48 to 80 km). The second reason is because, quite surprisingly, microwave networks may have lower latency than fiber, as we have already hinted at.
What is the purpose of a microwave tower?
A physical transmission tool called a microwave antenna is used to send microwave signals between two or more places. Antennas are used for radio astronomy, electronic warfare, and broadcasting in addition to other applications.
What function does the microwave antenna serve in the mobile tower?
A key system component that enables a microwave system to send and receive data between microwave sites is a microwave antenna. They are typically found at a tower's summit.
To know more about microwave visit:- brainly.com/question/15708046
#SPJ4
a 32.0kg sign is attached outside of a building by four vertical ropes. how much tension (in n) would be in each individual rope to keep the sign motionless?
Answer:
the answer would be 78.4N worth of tension each.
Explanation:
we know that the sign is motionless and all of the tensions are the same, so let us represent the system with newtons second law with the y-axis pointing upwards
[tex]\sum F_y=4t-mg[/tex]
where t is the tension of one of the strings and m is the mass of the signpost. We know that the net force in the y direction is zero, so[tex]4t-mg=0\Rightarrow{t=\frac{mg}{4}=\frac{32.0*9.8}{4}=78.4}[/tex]
In a certain viscous ( SAE 30), incompressible flow field with zero body forces the velocity components are
u=ay - b(cy-y^2); V= W= 0;
where a = 5; b = 779 [1/(s m)], and c are constant. Use the Navier - Stokes equations to determine an expression for the pressure gradient in the x direction [Pa/m].
An expression for the pressure gradient in the x direction a - bc = 0,c = - 0.006418.
As given ρ = c
Momentum in x,
ρ [tex]\frac{du}{dt}[/tex] = ρ gx - [tex]\frac{dp}{dx}[/tex] + μ ([tex]\frac{d^2u}{dy^2}[/tex] + [tex]\frac{d^2u}{dy^3}[/tex] + [tex]\frac{d^u}{dz^2}[/tex])
u = ay - b(y - [tex]y^{2}[/tex])
dp/dx = 2bμ
T = 0, du/dy = 0
a - bc = 0
c = - 0.006418
The pressure gradient, which is a physical term used in atmospheric science to indicate the direction and rate at which pressure rises most quickly around a certain site, is normally defined as being of air, although it can also more broadly refer to any fluid momentum. Pascals per meter (Pa/m) is a dimensional unit used to express the pressure gradient. The gradient of pressure as a function of position is what it is mathematically referred to as. The force density is the name for the negative gradient of pressure.
Pressure gradients in petroleum geology and petrochemical sciences relevant to oil wells, and more especially in hydrostatics, refer to the gradient of vertical pressure in a column of fluid within a wellbore and are often stated in pounds per square inch per foot (psi/ft)
Learn more about pressure gradient here:
https://brainly.com/question/14336958
#SPJ4
consider the diffraction pattern produced by illuminating a double slit. show answer no attempt if the spacing between the slits d is very large, what happens to the spacing between the zero intensity points?
The space between various fringes grows as the light's wavelength rises because this is a wavelength-dependent property.
The wavelength, what is it?A waveform signal's wavelength is defined as the separation among identical locations (adjacent crests) in adjacent cycles as the signal travels through space or along a wire. This length in wireless systems is typically expressed in metres (m), centimeters (cm), or millimeters (mm) (mm).
What role does wavelength play in science?Since it dictates the character of the light, the wavelengths is a crucial component. Greens light has a frequency that is distinct from both blue and red light, and it has a wavelength that is distinct from neither of them.
To know more about Wavelength visit:
https://brainly.com/question/13533093
#SPJ4
When an object is thrown straight up with no air resistance, what is the velocity at the highest point before it falls down?.
Answer: The answer to that would be zero (0) velocity.
I hope this helps!!!
