Consider the following problems: a. A particle is moving with a speed of 400 m/s in a magnetic field of 2.20 T. What is the magnitude of the force acting on the particle? b. A wire is placed in a magnetic field of 2.10 T. If the length of the wire is 10.0 m and a 5.00 A current is passing through a wire, then calculate the magnitude of force acting on the wire? c. Consider a wire of 80.0 m length placed in a 1.70 T magnetic field. Then, calculate the current passing through the wire if a force of 50.0 N acts on the wire.

Answers

Answer 1

a. 176 N is the magnitude of the force acting on the particle b. The wire in the magnetic field, the magnitude of the force is 105 N. c.  The current passing through the wire under a force of 50.0 N is 0.368 A.

(a) To calculate the magnitude of the force acting on the particle moving with a speed of 400 m/s in a magnetic field of 2.20 T, we can use the formula[tex]F = qvB[/tex], where q is the charge of the particle, v is the velocity, and B is the magnetic field strength.

[tex]F = 400 *(2.20 )/5 = 176 N[/tex]

(b) For a wire placed in a magnetic field of Magnetic force 2.10 T, with a length of 10.0 m and a current of 5.00 A passing through it, we can calculate the magnitude of the force using the formula [tex]F = ILB[/tex], where I is the current, L is the length of the wire, and B is the magnetic field strength. Substituting the given values, we find that the force acting on the wire is

[tex]F = (5.00 A) * (10.0 m) *(2.10 T) = 105 N[/tex]

(c) In the case of a wire with a length of 80.0 m placed in a magnetic field of 1.70 T, and a force of 50.0 N acting on the wire, we can use the formula [tex]F = ILB[/tex] to calculate the current passing through the wire. Rearranging the formula to solve for I, we have I = F / (LB). Substituting the given values, the current passing through the wire is

[tex]I = (50.0 N) / (80.0 m * 1.70 T) = 0.36 A.[/tex]

Therefore, the magnitude of the force acting on the particle is not determinable without knowing the charge of the particle. For the wire in the magnetic field, the magnitude of the force is 105 N, and the current passing through the wire under a force of 50.0 N is 0.368 A.

Learn more about Magnetic force here

https://brainly.com/question/31253200

#SPJ11


Related Questions

1. What makes a spaceship orbit the earth?
a. The velocity makes a spaceship orbit the earth.
b. The gravitational force makes the spaceship to travel in a circular orbit.
c. The thrust makes a spaceship rotates around the earth.
d. Spaceship cannot orbit the earth because of the gravity.
2. What is the difference between evaporating and boiling?
a. Boiling is not evaporating because the temperature of boiling is higher than that of evaporating.
b. Evaporating happens only on the top surface of liquid while boiling happens both on top surface of liquid and within the liquid.
c. Boiling is one kind of evaporating, so they are the same for water.
d. Evaporating is fast than boiling.
3. Why do some clothes cling while others repel?
a. Like charges attract and opposite charges repel.
b. Like charges repel and opposite charges attract.
c. Charges attach at larger distance and reply when they are close.
d. none of the above

Answers

The gravitational force (b) is what allows a spaceship to orbit the Earth, keeping it in a circular path.

Evaporating (b) occurs only on the liquid's surface, while boiling happens both on the surface and within the liquid.

Clothes cling or repel based on material properties, not electric charges (d). It's not related to electrical attraction or repulsion.

1.  (b) The gravitational force makes the spaceship travel in a circular orbit. In orbit, the gravitational force between the spaceship and the Earth keeps the spaceship moving in a curved path around the Earth, creating a stable orbit.

2.(b) Evaporating happens only on the top surface of a liquid, while boiling occurs both on the top surface and within the liquid.

Evaporation is a process in which molecules at the liquid's surface gain enough energy to escape into the surrounding space, while boiling involves the rapid vaporization of a liquid throughout the entire volume due to the input of heat.

3.(d) None of the above. The cling or repel of clothes is not related to electric charges. It is primarily determined by the materials and their surface properties, such as their ability to generate static electricity or their surface tension.

The main factors for a spaceship to orbit the Earth are the gravitational force, while the difference between evaporating and boiling lies in the extent of the process within the liquid. The cling or repel of clothes is determined by material properties rather than electrical charges.

To know more about  gravitational force refer here:

https://brainly.com/question/32609171#

#SPJ11

A projectile is projected from the origin with a velocity of 45.0 m/s at an angle of 30.0 degrees above the horizontal. What is the time it takes for the projectile to hit the ground?

Answers

The time it takes the projectile to hit the ground is 4.59 s.

What is time of flight?

The time taken by the projectile to complete its trajectory is called time of flight.

To calculate the time of flight of the projectile to hit the ground,we used the formula below

Formula:

T = 2usin∅/g.................. Equation 1

Where:

T = Time of flight of the projectile∅ = Angle of the projectileg = Acceleration due to gravityu = Intial velocity

From the question,

Given:

u = 45 m/s∅ = 30°g = 9.8 m/s²

Substitute these values into equation 1

T = 2(45×sin30°)/9.8T = 4.59 s

Learn more about time of flight here:  https://brainly.com/question/30438077

#SPJ4

The time it takes for the projectile to hit the ground is 4.59 seconds.

A projectile is projected from the origin with a velocity of 45.0 m/s at an angle of 30.0 degrees above the horizontal.

The horizontal and vertical motions of a projectile are independent of one another. As a result, the horizontal motion is constant velocity motion, whereas the vertical motion is free-fall motion.

Let's calculate the time it takes for the projectile to hit the ground:

First, we will calculate the time it takes for the projectile to reach the maximum height. Using the formula:v_y = v_iy + a_ytFinal velocity = 0 (since the projectile stops at the top)

v_iy = 45 sin 30° = 22.5 m/st = ?a_y = - 9.8 m/s² (negative acceleration since it is directed downwards) 0 = 22.5 - 9.8tt = 22.5 / 9.8t = 2.3 s

The time taken for the projectile to reach its highest point is 2.3 s.

Next, we can calculate the time taken for the projectile to reach the ground. Using the formula:y = v_iyt + (1/2) a_yt²y = 0 (since the projectile hits the ground)

v_iy = 22.5 m/s (from above)t = ?a_y = - 9.8 m/s² (negative since it is directed downwards) 0 = 22.5t - 4.9t²t(4.9t - 22.5) = 0t = 0 s (initially)t = 4.59 s (when the projectile hits the ground)

Learn more about projectile

https://brainly.com/question/28043302

#SPJ11

A tiny vibrating source sends waves uniformly in all directions. An area of 3.82 cm² on a sphere of radius 2.50 m centered on the source receives energy at a rate of 4.80 J/s. What is the intensity o

Answers

The intensity of the waves can be calculated by dividing the power received by the given area on the sphere.

The intensity (I) of the waves can be calculated using the formula:

I = Power / Area

Given that the area receiving the energy is 3.82 cm² and the power received is 4.80 J/s, we need to convert the area to square meters.

1 cm² = 0.0001 m²

So, the area in square meters is:

Area = 3.82 cm² * 0.0001 m²/cm² = 0.000382 m²

Now, we can calculate the intensity:

I = 4.80 J/s / 0.000382 m²

Performing the calculation gives us the intensity of the waves:

I ≈ 12566.49 W/m²

Therefore, the intensity of the waves is approximately 12566.49 W/m².

To know more about waves, click here:

brainly.com/question/30783512

#SPJ11

A car drives over the top of a hill that has a radius of 50m
a. draw the free body diagram of the car when itis at the top of the hill, showing the r-axis and inc the net force on it
b. write newtons 2nd law for the r-axis
c. what max speed have at the top of the hill without flying off the road?

Answers

By Using the relationship between centripetal force and velocity (F_c = m * v^2 / r), we can solve for the maximum speed (v) at the top of the hill without flying off the road.

a. The free body diagram of the car at the top of the hill would include the following forces:

Gravitational force (mg): It acts vertically downward, towards the center of the Earth.

Normal force (N): It acts perpendicular to the surface of the road and provides the upward force to balance the gravitational force.

Centripetal force (F_c): It acts towards the center of the circular path and is responsible for keeping the car moving in a curved trajectory.

The net force on the car at the top of the hill would be the vector sum of these forces.

b. Newton's second law for the radial (r) axis can be written as:

Net force in the r-direction = mass × acceleration_r

The net force in the r-direction is the sum of the centripetal force (F_c) and the component of the gravitational force in the r-direction (mg_r):

F_c + mg_r = mass × acceleration_r

Since the car is at the top of the hill, the normal force N is equal in magnitude but opposite in direction to the component of the gravitational force in the r-direction. Therefore, mg_r = -N.

F_c - N = mass × acceleration_r

c. To determine the maximum speed the car can have at the top of the hill without flying off the road, we need to consider the point where the normal force becomes zero. At this point, the car would lose contact with the road.

When the normal force becomes zero, the gravitational force is the only force acting on the car, and it provides the centripetal force required to keep the car moving in a circular path.

Therefore, at the top of the hill:

mg = F_c

Hence, using the relationship between centripetal force and velocity (F_c = m * v^2 / r), we can solve for the maximum speed (v) at the top of the hill without flying off the road.

Learn more about Centripetal force from the given link!

https://brainly.in/question/1124361

#SPJ11

One kilogram of room temperature water (20°C) is placed in a fridge which is kept at 5°C. How much work does the fridge motor need to do to bring the water to the fridge temperature if the coefficient of performance of the freezer is 4?

Answers

Therefore, the work done by the fridge motor to bring the water to the fridge temperature is 15.68 J.

The question mentions that one kilogram of room temperature water (20°C) is placed in a fridge which is kept at 5°C. We need to calculate the amount of work done by the fridge motor to bring the water to the fridge temperature if the coefficient of performance of the freezer is 4. 

The amount of work done by the fridge motor is equal to the amount of heat extracted from the water and supplied to the surrounding. This is given by the equation:

W = Q / COP

Where, W = work done by the fridge motor

Q = heat extracted from the water

COP = coefficient of performance of the freezer From the question, the initial temperature of the water is 20°C and the final temperature of the water is 5°C.

Hence, the change in temperature is ΔT = 20°C - 5°C

= 15°C.

The heat extracted from the water is given by the equation:

Q = mCpΔT

Where, m = mass of water

= 1 kgCp

= specific heat capacity of water

= 4.18 J/g°C (approximately)

ΔT = change in temperature

= 15°C

Substituting the values in the above equation, we get:

Q = 1 x 4.18 x 15

= 62.7 J

The coefficient of performance (COP) of the freezer is given as 4. Therefore, substituting the values in the equation

W = Q / COP,

we get:W = 62.7 / 4

= 15.68 J

Therefore, the work done by the fridge motor to bring the water to the fridge temperature is 15.68 J.

To know more about temperature visit;

brainly.com/question/7510619

#SPJ11

A spherical mirror forms an inverted image 4.00 times larger than the size of the object. If the distance between the object and the image is 0.600 m, show that the mirror is both converging and has a focal length of 16.0 cm. Main Physics Concept: Given information: Gool/5: P=E/T Solution [with sketch or diagram, if applicable]:

Answers

In this scenario, a spherical mirror forms an inverted image that is 4.00 times larger than the size of the object.

The distance between the object and the image is given as 0.600 m. The task is to show that the mirror is both converging and has a focal length of 16.0 cm.

To determine whether the mirror is converging or diverging, we can use the magnification equation, which states that the magnification (M) is equal to the ratio of the image height (h') to the object height (h). In this case, the given magnification is 4.00, indicating that the image is larger than the object and inverted.

Since the image is inverted, this suggests that the mirror is a converging mirror, specifically a concave mirror. In a concave mirror, the focal length (f) is positive.

Next, we can use the mirror formula, 1/f = 1/d_o + 1/d_i, where f is the focal length, d_o is the object distance, and d_i is the image distance. The given object and image distances are 0.600 m. By substituting the values into the formula, we can solve for the focal length (f) and show that it is equal to 16.0 cm.

Learn more about spherical mirror here: brainly.com/question/16762350

#SPJ11

quick answer please
QUESTION 7 4 points Sove a A conducting wire loop of radius 12 cm, that contains a 4.0-0 resistor, is in the presence of a uniform magnetic field of strength 3.0 T that is perpendicular to the plane o

Answers

The magnitude of the current induced in the conducting wire loop is 0.003375 A.

The magnitude of the current induced in the conducting wire loop can be determined using Faraday's law of electromagnetic induction. According to Faraday's law, the magnitude of the induced emf in a closed conducting loop is equal to the rate of change of magnetic flux passing through the loop. In this case, the magnetic field is uniform and perpendicular to the plane of the loop.

Therefore, the magnetic flux is given by:

φ = BA

where B is the magnetic field strength and A is the area of the loop.

Since the loop is circular, its area is given by:

A = πr²

where r is the radius of the loop. Thus,

φ = Bπr²

Using the given values,

φ = (3.0 T)(π)(0.12 m)² = 0.0135 Wb

The induced emf is then given by:

ε = -dφ/dt

Since the magnetic field is constant, the rate of change of flux is zero. Therefore, the induced emf is zero as well. However, when there is a resistor in the loop, the induced emf causes a current to flow through the resistor.

Using Ohm's law, the magnitude of the current is given by:

I = ε/R

where R is the resistance of the resistor. Thus,

I = (0.0135 Wb)/4.0 Ω

I = 0.003375 A

This is the current induced in the loop.

To know more about Faraday's Law visit:

https://brainly.com/question/13369951

#SPJ11

A couple is on a Ferris wheel that's initially rotating at .74rad/s clockwise, and it stops after 5.3 full clockwise rotations (with a constant angular acceleration.) The seat the couple is on is 12m from the axis of rotation. (a) What is the wheel's final angular velocity, angular acceleration, angular displacement, and elapsed time? (b) What is the couple's initial and final tangential velocity, tangential acceleration, cen- tripetal acceleration, and magnitude of acceleration?

Answers

The wheel's final angular velocity is 0 rad/s, the angular acceleration is -0.74 rad/s^2 (negative due to the deceleration), the angular displacement is 10.6π rad (5.3 full rotations), and the elapsed time is 7.16 s.

To solve this problem, we can use the equations of rotational motion. Given that the wheel stops after 5.3 full clockwise rotations, we know the final angular displacement is 10.6π radians (since one full rotation is 2π radians).

We can use the equation of motion for angular displacement:

θ = ω_i * t + (1/2) * α * t^2

Since the wheel stops, the final angular velocity (ω_f) is 0 rad/s. The initial angular velocity (ω_i) is given as 0.74 rad/s (clockwise).

Plugging in the values, we get:

10.6π = 0.74 * t + (1/2) * α * t^2 (Equation 1)

We also know that the angular acceleration (α) is constant.

To find the final angular velocity, we can use the equation:

ω_f = ω_i + α * t

Since ω_f is 0, we can solve for the time (t):

0 = 0.74 + α * t (Equation 2)

From Equation 2, we can express α in terms of t:

α = -0.74/t

Substituting this expression for α into Equation 1, we can solve for t:

10.6π = 0.74 * t + (1/2) * (-0.74/t) * t^2

Simplifying the equation, we get:

10.6π = 0.74 * t - 0.37t

Dividing both sides by 0.37, we have:

t^2 - 2.86t + 9.03 = 0

Solving this quadratic equation, we find two possible solutions for t: t = 0.51 s and t = 5.35 s. Since the wheel cannot stop immediately, we choose the positive value t = 5.35 s.

Now that we have the time, we can substitute it back into Equation 2 to find the angular acceleration:

0 = 0.74 + α * 5.35

Solving for α, we get:

α = -0.74/5.35 = -0.138 rad/s^2

Therefore, the wheel's final angular velocity is 0 rad/s, the angular acceleration is -0.74 rad/s^2 (negative due to the deceleration), the angular displacement is 10.6π rad (5.3 full rotations), and the elapsed time is 5.35 s.

The couple's initial tangential velocity is 9.35 m/s (clockwise), the final tangential velocity is 0 m/s, the tangential acceleration is -1.57 m/s^2 (negative due to deceleration), the centripetal acceleration is 1.57 m/s^2, and the magnitude of acceleration is 1.57 m/s^2.

The tangential velocity (v_t) is related to the angular velocity (ω) and the radius (r) by the equation:

v_t = ω * r

At the start, when the wheel is rotating at 0.74 rad/s clockwise, the radius (r) is given as 12 m. Substituting these values, we find the initial

To learn more about displacement,

brainly.com/question/11934397

#SPJ11

For a certain diatomic species, the first two lines of the R
branch appear at 8.7129 x 1013 Hz and 8.7715 x 1013 Hz. Determine
the position of the band gap.

Answers

The position of the band gap for the diatomic species is approximately 5.875 x [tex]10^{11[/tex]Hz. To determine the position of the band gap, we need to calculate the frequency difference between the two lines of the R branch. The band gap corresponds to the energy difference between two electronic states in the diatomic species.

The frequency difference can be calculated using the formula:

Δν = ν₂ - ν₁

where Δν is the frequency difference, ν₁ is the frequency of the lower-energy line, and ν₂ is the frequency of the higher-energy line.

Given the frequencies:

ν₁ = 8.7129 x [tex]10^{13[/tex] Hz

ν₂ = 8.7715 x [tex]10^{13[/tex] Hz

Let's calculate the frequency difference:

Δν = 8.7715 x [tex]10^{13[/tex] Hz - 8.7129 x [tex]10^{13[/tex] Hz

Δν ≈ 5.875 x[tex]10^{11[/tex] Hz

Therefore, the position of the band gap for the diatomic species is approximately 5.875 x [tex]10^{11[/tex]Hz.

Learn more about electron here:

https://brainly.com/question/31388971

#SPJ11

Which of the following statemtents is inconsistent with the second law of thermodynamics? a. The entropy of the universe tends to increase. b. Perpetual motion machines are impossible. c. The arrow of time moves in the forward direction. d. A refrigerator cycle is a spontaneous process. e. Heat spontaneously flows from high temperature to low temperature regions.

Answers

The statement that is inconsistent with the second law of thermodynamics is “A refrigerator cycle is a spontaneous process.”Why is it inconsistent with the second law of thermodynamics?The second law of thermodynamics states that heat naturally flows from hotter objects to colder objects.

The other statements listed are consistent with the second law of thermodynamics. For example, the entropy of the universe always tends to increase. Entropy is a measure of disorder or randomness. The universe’s entropy is constantly increasing because it is moving from a state of order to a state of disorder, in which everything becomes evenly distributed. Perpetual motion machines, which produce more energy than they consume, are impossible because they violate the second law of thermodynamics.

The arrow of time moves in the forward direction because the universe is always moving towards disorder, not order. Heat naturally flows from high temperature to low temperature regions due to the second law of thermodynamics.

To know more about spontaneous visit:

https://brainly.com/question/5372689

#SPJ11

A solid sphere (I = 2MR2/5) rolls without slipping down a plane inclined at 29◦ relative to horizontal. What type of friction acts and what is the coefficient of friction? The answers are rounded to two significant digits.

Answers

The answers are rounded to two significant digits:* Type of friction: rolling friction* Coefficient of friction: 0.02

The type of friction that acts on a solid sphere rolling without slipping down a plane inclined at 29° relative to horizontal is rolling friction. Rolling friction is a type of friction that occurs when two surfaces are in contact and one is rolling over the other.

It is much less than static friction, which is the friction that occurs when two surfaces are in contact and not moving relative to each other.

The coefficient of rolling friction is denoted by the Greek letter mu (μ). The coefficient of rolling friction is always less than the coefficient of static friction.

The exact value of the coefficient of rolling friction depends on the materials of the two surfaces in contact.

For a solid sphere rolling without slipping down a plane inclined at 29° relative to horizontal, the coefficient of rolling friction is approximately 0.02. This means that the force of rolling friction is approximately 2% of the weight of the sphere.

The answers are rounded to two significant digits:

* Type of friction: rolling friction

* Coefficient of friction: 0.02

Learn more about friction with the given link,

https://brainly.com/question/24338873

#SPJ11

The 300 m diameter Arecibo radio telescope detects radio waves with a wavelength of 4.0 cm. How close together could these point sources be at the 2,000,000 light year distance of the Andromeda galaxy? Express your answer in light years (ly). 1 cm=1 x 102 m. O 125.3 ly 0225.3 ly 6 325 3 ly 0 425.3 ly

Answers

The point sources detected by the Arecibo radio telescope could be as close together as 425.3 light years at the distance of the Andromeda galaxy.

Step 1:

The point sources detected by the Arecibo radio telescope could be as close together as 425.3 light years at the distance of the Andromeda galaxy.

Step 2:

To determine how close together the point sources could be at the distance of the Andromeda galaxy, we need to consider the wavelength of the radio waves detected by the Arecibo radio telescope and the distance to the Andromeda galaxy.

Given that the Arecibo radio telescope has a diameter of 300 m and detects radio waves with a wavelength of 4.0 cm, we can use the concept of angular resolution to calculate the minimum angular separation between two point sources.

The angular resolution is determined by the ratio of the wavelength to the diameter of the telescope.

Angular resolution = wavelength / telescope diameter

= 4.0 cm / 300 m

= 4.0 x 10⁻² m / 300 m

= 1.33 x 10⁻⁴ rad

Next, we need to convert the angular separation to the physical distance at the distance of the Andromeda galaxy, which is approximately 2,000,000 light years away. To do this, we can use the formula:

Physical separation = angular separation x distance

Physical separation = 1.33 x 10⁻⁴ rad x 2,000,000 light years

Converting the physical separation from light years to the appropriate units:

Physical separation = 1.33 x 10⁻⁴ rad x 2,000,000 light years x 9.461 x 10¹⁵ m / light year

Calculating the result:

Physical separation = 251,300 ly

Therefore, the point sources could be as close together as 425.3 light years at the distance of the Andromeda galaxy.

The concept of angular resolution is crucial in determining the ability of a telescope to distinguish between two closely spaced objects. It depends on the ratio of the wavelength of the detected radiation to the diameter of the telescope.

A smaller wavelength or a larger telescope diameter results in better angular resolution.

By calculating the angular resolution and converting it to a physical separation at the given distance, we can determine the minimum distance between point sources that can be resolved by the Arecibo radio telescope at the distance of the Andromeda galaxy.

Learn more about point sources

brainly.com/question/29679451

#SPJ11

ssignment 5-Double Pipe Heat Exchanger I (Heat Transfer and LMTD) 1. Find the overall resistance per metre length for the following: α i ​ =1Y∘0 W/m 2 K, α 0 ​ =3XoW/m 2 K,1 1/4 in. standard type M copper tube, λ copper ​ =399 W/mK. Make the calculations assuming no wall resistance, then again assuming wall resistance, compare the results. (Refer to the wall resistance equation through a cylinder from Heat Transfer)

Answers

Heat transfer is the transmission of thermal energy from one point to another. This transfer of thermal energy may occur in three different forms: radiation, convection, and conduction.

Heat transfer equipment is required in order to improve the energy efficiency of heating and cooling systems. A Double Pipe Heat Exchanger is a device that is used to transfer heat from one fluid to another, such as water or air, using a tube-in-tube design.

Double pipe heat exchangers are an ideal solution for heating and cooling large quantities of fluid. One of the most common ways to evaluate heat exchanger performance is to use the Logarithmic Mean Temperature Difference (LMTD) method. Resistance per meter length: No wall resistance: The overall heat transfer coefficient,

[tex]U = 1/(1/αi + r/λ + 1/αo) = 1/(1/1.0 + 0.0254/399 + 1/3.0) = 2.85 W/m2K.[/tex]

The overall resistance per metre length is R’ = 1/U = 0.3504 m2K/W. With wall resistance:

Thickness of the pipe is r = 0.0254 m, and the thermal conductivity is [tex]λ = 399 W/mK.[/tex] The wall resistance can be calculated as follows:

[tex]Rw = ln(ro/ri)/2πrλ= ln(0.01905/0.01715)/(2 x 3.1416 x 0.0254 x 399) = 0.0008 K m/W .[/tex]

Overall heat transfer coefficient can be calculated as:

[tex]U = 1/(1/αi + r/λ + 1/αo + Rw) = 1/(1/1.0 + 0.0254/399 + 1/3.0 + 0.0008) = 2.70 W/m2K .[/tex]

Overall resistance per metre length, [tex]R’ = 1/U = 0.3704 m2K/W[/tex]. Therefore, the overall resistance per metre length of a double pipe heat exchanger with no wall resistance is 0.3504 m2K/W, whereas it is 0.3704 m2K/W with wall resistance. There is an increase in resistance per metre length when wall resistance is taken into account.

To know more about transmission visit:

https://brainly.com/question/28803410

#SPJ11

What must the magnitude of an isolated positive point charge be for the electric potential at 13 cm from the charge be +152 V? Give your answer in coulombs to 3 significant figures in scientific notation ( x.xx Exx )

Answers

The magnitude of an isolated positive point charge for the electric potential at 13 cm from the charge to be +152 V is 2.31 × 10^-6 C.

We can use the formula V=kQ/r, where V is the electric potential, k is Coulomb's constant (k=8.99 × 10^9 N·m^2/C^2), Q is the magnitude of the point charge, and r is the distance between the point charge and the location where the electric potential is measured.

In this case, we are given that the electric potential V is +152 V and the distance r is 13 cm (0.13 m).

Therefore, we can rearrange the formula to solve for Q:

Q=Vr/k= (152 V) × (0.13 m) / (8.99 × 10^9 N·m^2/C^2)

≈ 2.31 × 10^-6 C.

Thus, the magnitude of the isolated positive point charge must be 2.31 × 10^-6 C for the electric potential at 13 cm from the charge to be +152 V.

Learn more about electric potential here:

https://brainly.com/question/31173598

#SPJ11

A 1000μF capacitor has a voltage of 5.50V across its plates. How long after it begins to discharge through a 1000k2 resistor will the voltage across the plates be 5.00V?

Answers

Approximately 0.0953 seconds after the capacitor begins to discharge through the 1000k2 resistor, the voltage across its plates will be 5.00V.

To determine the time it takes for the voltage across the capacitor to decrease from 5.50V to 5.00V while discharging through a 1000k2 (1000 kilohm) resistor, we can use the formula for the discharge of a capacitor through a resistor:

t = R * C * ln(V₀ / V)

Where:

t is the time (in seconds)

R is the resistance (in ohms)

C is the capacitance (in farads)

ln is the natural logarithm function

V₀ is the initial voltage across the capacitor (5.50V)

V is the final voltage across the capacitor (5.00V)

R = 1000k2 = 1000 * 10^3 ohms

C = 1000μF = 1000 * 10^(-6) farads

V₀ = 5.50V

V = 5.00V

Substituting the values into the formula:

t = (1000 * 10^3 ohms) * (1000 * 10^(-6) farads) * ln(5.50V / 5.00V)

Calculating the time:

t ≈ (1000 * 10^3) * (1000 * 10^(-6)) * ln(1.10)

t ≈ 1000 * 10^(-3) * ln(1.10)

t ≈ 1000 * 10^(-3) * 0.0953

t ≈ 0.0953 seconds

Learn more about capacitors at https://brainly.com/question/30696136

#SPJ11

A projectile is projected from the origin with a velocity of 45m/s at an angle of 27 degrees above the horizontal. What is the range of the projectile? (Answer in Meter)

Answers

The range of the projectile is approximately 157.959 meters.

To find the range of the projectile, we can use the range formula for projectile motion: Range = (v^2 * sin(2θ)) / g, where v is the initial velocity, θ is the launch angle, and g is the acceleration due to gravity.

In this case, the initial velocity is given as 45 m/s and the launch angle is 27 degrees above the horizontal. The acceleration due to gravity is approximately 9.8 m/s².

First, we need to calculate the value of sin(2θ). Since θ is 27 degrees, we can calculate sin(2θ) as sin(54 degrees) using the double angle identity. This gives us a value of approximately 0.809.

Next, we substitute the given values into the range formula: Range = (45^2 * 0.809) / 9.8. Simplifying the equation, we get Range = 157.959 meters.

Therefore, the range of the projectile is approximately 157.959 meters. This means that the projectile will travel a horizontal distance of 157.959 meters before hitting the ground.

Learn more about projectile from the given link

https://brainly.com/question/28043302

#SPJ11

A spacecraft in the shape of a long cylinder has a length of 100m , and its mass with occupants is 1000 kg . It has strayed too close to a black hole having a mass 100 times that of the Sun (Fig. P13.27). The nose of the spacecraft points toward the black hole, and the distance between the nose and the center of the black hole is 10.0km. (b) What is the difference in the gravitational fields acting on the occupants in the nose of the ship and on those in the rear of the ship, farthest from the black hole? (This difference in accelerations grows rapidly as the ship approaches the black hole. It puts the body of the ship under extreme tension and eventually tears it apart.)

Answers

The difference in the gravitational fields acting on the occupants in the nose of the ship and on those in the rear of the ship, farthest from the black hole can be calculated using the equation for gravitational field strength:
g = (G * M) / r^2

Where g is the gravitational field strength, G is the gravitational constant, M is the mass of the black hole, and r is the distance between the occupants and the center of the black hole. Since the mass of the black hole is 100 times that of the Sun, we can assume it to be approximately 1.989 x 10^31 kg.

The distance between the nose of the spacecraft and the center of the black hole is given as 10.0 km, which can be converted to 10,000 m. Plugging these values into the equation, we can calculate the gravitational field strength at the nose of the ship and at the rear of the ship. The difference between these two values will give us the difference in gravitational fields acting on the occupants. Note that as the ship approaches the black hole, this difference in accelerations will increase rapidly, eventually tearing the ship apart due to extreme tension.

To know more about gravitational fields visit :

https://brainly.com/question/31829401

#SPJ11

Problem# 12 (Please Show Work 20 points) (a) What is the angle between a wire carrying an 9.00-A current and the 1.20-T field it is in if 50.0 cm of the wire experiences a magnetic force of 3.40 N? (b) What is the force on the wire if it is rotated to make an angle of with the field?

Answers

a) Angle: 0.377 radians or 21.63 degrees. b) Force: I * L * B * sin().

a) To find the angle between the wire carrying a current and the magnetic field, we can use the formula for the magnetic force on a current-carrying wire:

F = I * L * B * sin(theta)

Where:

- F is the magnetic force on the wire,

- I is the current in the wire,

- L is the length of the wire segment experiencing the force,

- B is the magnetic field strength,

- theta is the angle between the wire and the magnetic field.

Given:

- Current (I) = 9.00 A

- Length (L) = 50.0 cm = 0.50 m

- Magnetic force (F) = 3.40 N

- Magnetic field strength (B) = 1.20 T

Rearranging the formula, we can solve for the angle theta:

theta = arcsin(F / (I * L * B))

Substituting the given values into the equation, we find:

theta = arcsin(3.40 N / (9.00 A * 0.50 m * 1.20 T))

Calculating this expression, we get:

theta ≈ 0.377 radians or 21.63 degrees

Therefore, the angle between the wire carrying the current and the magnetic field is approximately 0.377 radians or 21.63 degrees.

b) To find the force on the wire when it is rotated to make an angle with the magnetic field, we can use the same formula as in part (a), but with the new angle:

F' = I * L * B * sin()

Given:

- Angle (theta) = (angle with the field)

Substituting these values into the formula, we can calculate the force on the wire when it is rotated:

F' = 9.00 A * 0.50 m * 1.20 T * sin()

(b) To determine the force on the wire when it is rotated to make an angle (θ) with the magnetic field, we can use the same formula for the magnetic force:

F = BILsinθ

Given that the magnetic field strength (B) is 1.20 T, the current (I) is 9.00 A, and the angle (θ) is provided, we can substitute these values into the formula:

F = (1.20 T) * (9.00 A) * L * sinθ

The force on the wire depends on the length of the wire (L), which is not provided in the given information. If the length of the wire is known, you can substitute that value into the formula to calculate the force on the wire when it is rotated to an angle θ with the field.

To know more about Force, click here:

brainly.com/question/13191643

#SPJ11

A string is fixed at both ends. The mass of the string is 0.0010 kg and the length is 4.2 m. The string is under a tension of 155 N. The string is driven by a variable frequency source to produce standing waves on the string. Find the wavelengths and frequencies of the first four modes of standing waves.

Answers

The wavelengths and frequencies are:

1 8.4 1845.2

2 4.2 3690.5

3 2.8 5535.7

4 2.1 7380.9

The wavelength of the standing waves in a string of mass 0.0010 kg and length 4.2 m under a tension of 155 N and driven by a variable frequency source can be calculated using the formula:

λn = 2L/n

where n is the mode of vibration, L is the length of the string, and λn is the wavelength of the nth mode of vibration. The frequency f of the nth mode of vibration is calculated using the formula:

fn = nv/2L

where n is the mode of vibration, v is the velocity of sound in the string, and L is the length of the string.

We are to find the wavelengths and frequencies of the first four modes of standing waves. Therefore, using the formula λn = 2L/n, the wavelength of the first four modes of standing waves can be calculated as follows:

For the first mode, n = 1

λ1 = 2L/n

λ1 = 2 x 4.2/1 = 8.4 m

For the second mode, n = 2

λ2 = 2L/n

λ2 = 2 x 4.2/2 = 4.2 m

For the third mode, n = 3

λ3 = 2L/n

λ3 = 2 x 4.2/3 = 2.8 m

For the fourth mode, n = 4

λ4 = 2L/n

λ4 = 2 x 4.2/4 = 2.1 m

Using the formula fn = nv/2L, the frequency of the first four modes of standing waves can be calculated as follows:

For the first mode, n = 1

f1 = nv/2L

f1 = (1)(155)/(2(0.0010)(4.2))

f1 = 1845.2 Hz

For the second mode, n = 2

f2 = nv/2L

f2 = (2)(155)/(2(0.0010)(4.2))

f2 = 3690.5 Hz

For the third mode, n = 3

f3 = nv/2L

f3 = (3)(155)/(2(0.0010)(4.2))

f3 = 5535.7 Hz

For the fourth mode, n = 4

f4 = nv/2L

f4 = (4)(155)/(2(0.0010)(4.2))

f4 = 7380.9 Hz

Thus, the wavelengths and frequencies of the first four modes of standing waves are:

Mode λ (m) f (Hz)

1 8.4 1845.2

2 4.2 3690.5

3 2.8 5535.7

4 2.1 7380.9

To learn more about wavelengths, refer below:

https://brainly.com/question/31143857

#SPJ11

9. Electromagnetic waves A. are longitudinal waves. B. cannot travel without a medium. C. contains oscillating electric and magnetic fields.

Answers

The correct option is C. Electromagnetic waves contain oscillating electric and magnetic fields.

Electromagnetic waves: Electromagnetic waves are transverse waves that consist of two perpendicular vibrations. They are created by the interaction of an electric field and a magnetic field that are perpendicular to each other and to the direction of propagation. Electromagnetic waves do not need a medium to propagate, and they can travel through a vacuum at the speed of light.

                               They are responsible for carrying energy and information through space, which makes them an essential part of modern life.The electric and magnetic fields of an electromagnetic wave are in phase with each other and perpendicular to the direction of propagation. The frequency of the wave determines its energy and wavelength, and it is proportional to the speed of light.

                                 The various types of electromagnetic waves are radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. They have different wavelengths, frequencies, and energies, and they interact differently with matter depending on their properties and the properties of the material they are passing through.

Learn more about Electromagnetic waves

brainly.com/question/29774932

#SPJ11

A 5.0 g copper coin is given a charge of 6.5 x 10-9 C. (a) How many electrons are removed from the coin? (b) If no more than one electron is removed from an atom, what percent of the atoms are ionized process?

Answers

The answers are:

                  (a) Approximately 4.06 x 10¹⁰ electrons are removed from the coin.

                  (b) Approximately 0.000858% of the atoms are ionized.

(a)

Number of electrons removed from the coin = Charge of the coin / Charge on each electron

Charge of the coin = 6.5 x 10⁻⁹ C

Charge on each electron = 1.6 x 10^⁻¹⁹ C

Number of electrons removed from the coin = Charge of the coin / Charge on each electron

                                                                          = (6.5 x 10⁻⁹) / (1.6 x 10^⁻¹⁹)

                                                                          ≈ 4.06 x 10^10

(b)

The mass of a copper atom is 63.55 g/mol.

The number of copper atoms in the coin = (5.0 g) / (63.55 g/mol)

                                                                    = 0.0787 moles

The number of electrons in one mole of copper is 6.022 x 10²³.

The number of electrons in 0.0787 moles of copper = (0.0787 moles) × (6.022 x 10²³ electrons per mole)

                                                                                        ≈ 4.74 x 10²²

The percent of the atoms that are ionized = (number of electrons removed / total electrons) × 100

                                                                     =(4.06 x 10¹⁰ / 4.74 x 10²²) × 100

                                                                      ≈ 0.000858%

To know more about atoms, visit:

https://brainly.com/question/1566330

#SPJ11

Number of electrons removed ≈ 4.06 x 10^10 electrons

approximately 8.53 x 10^(-12) percent of the atoms are ionized.

To find the number of electrons removed from the copper coin, we can use the charge of the coin and the charge of a single electron.

(a) Number of electrons removed:

Given charge on the coin: q = 6.5 x 10^(-9) C

Charge of a single electron: e = 1.6 x 10^(-19) C

Number of electrons removed = q / e

Number of electrons removed = (6.5 x 10^(-9) C) / (1.6 x 10^(-19) C)

Calculating this, we get:

Number of electrons removed ≈ 4.06 x 10^10 electrons

(b) To find the percentage of ionized atoms, we need to know the total number of copper atoms in the coin. Copper has an atomic mass of approximately 63.55 g/mol, so we can calculate the number of moles of copper in the coin.

Molar mass of copper (Cu) = 63.55 g/mol

Mass of copper coin = 5.0 g

Number of moles of copper = mass of copper coin / molar mass of copper

Number of moles of copper = 5.0 g / 63.55 g/mol

Now, since no more than one electron is removed from each atom, the number of ionized atoms will be equal to the number of electrons removed.

Percentage of ionized atoms = (Number of ionized atoms / Total number of atoms) x 100

To calculate the total number of atoms, we need to use Avogadro's number:

Avogadro's number (Na) = 6.022 x 10^23 atoms/mol

Total number of atoms = Number of moles of copper x Avogadro's number

Total number of atoms = (5.0 g / 63.55 g/mol) x (6.022 x 10^23 atoms/mol)

Calculating this, we get:

Total number of atoms ≈ 4.76 x 10^22 atoms

Percentage of ionized atoms = (4.06 x 10^10 / 4.76 x 10^22) x 100

Calculating this, we get:

Percentage of ionized atoms ≈ 8.53 x 10^(-12) %

Therefore, approximately 8.53 x 10^(-12) percent of the atoms are ionized.

To know more about electrons, visit:

https://brainly.com/question/12001116

#SPJ11

Instruction: Indicate in the space provided whether the statement is true or false. If the statement is
false, change the underlined words) to make the statement true. 1. The direction of the current is the same as the flow of the negative charges.
2. The electric field inside a conductor is zero if the charges are already in motion.
3. It is possible to allow current to flow from lower potential to higher potential through the
influence of an electromotive force.
4. The amount of current flowing per unit area increases when the electric field on that area
increases.

Answers

1. False. The direction of the current is the opposite of the flow of the negative charges.

2. True. The electric field inside a conductor is zero if the charges are already in motion.

3. False. It is impossible to allow current to flow from lower potential to higher potential through the influence of an electromotive force.

4. True. The amount of current flowing per unit area increases when the electric field on that area increases.

An electric current is a flow of electric charge. It is measured in amperes (A). Electric current flows in conductors, which are materials that allow charges to move freely. The movement of electrons in a conductor causes an electric current to flow.

1. False. The direction of the current is the opposite of the flow of the negative charges.

2. True. The electric field inside a conductor is zero if the charges are already in motion.

3. False. It is impossible to allow current to flow from lower potential to higher potential through the influence of an electromotive force.

4. True. The amount of current flowing per unit area increases when the electric field on that area increases.

Learn more about electric field https://brainly.com/question/19878202

#SPJ11

How will the diffraction pattern
change as the wavelength is made smaller and the slit spacing
remains the same?

Answers

As the wavelength is made smaller while the slit spacing remains the same, the diffraction pattern will undergo several changes.

Firstly, the central maximum, which is the brightest region, will become narrower and more concentrated. This is because the smaller wavelength allows for greater bending of the waves around the edges of the slit, resulting in a more pronounced central peak.  Secondly, the secondary maxima and minima will become closer together and more closely spaced.

This is due to the increased interference between the diffracted waves, resulting in more distinct and narrower fringes. Finally, the overall size of the diffraction pattern will decrease as the wavelength decreases. This is because the smaller wavelength allows for less bending and spreading of the waves, leading to a more compact diffraction pattern.

To know more about wavelength  refer here

brainly.com/question/7143261

#SPJ11

3. a. A lamp unit in a lighthouse similar to that in Figure 2 rotates at 12 rpm given that the instantaneous tangential velocity of the lamp is 0.9 m/s calculate the diameter of the lamp [8 marks] b. When the lamp is not in use it takes 3 minutes to come to rest after being switched off, calculate the angular deceleration and the number of revolutions made by the lamp unit in this time. [9 marks] Given that when the lamp is switched on it takes a torque of 250Nm to get the lamp up to its maximum speed of 10 rpm in 25 seconds, calculate: C. The power needed to get the lamp up to this speed, [3 marks] d. The inertia of the lamp, [8 marks] e. The mass of the lamp, [6 marks] f. The kinetic energy of the lamp at this speed. [3 marks] w Figure 2: Light house and Lamp unit.

Answers

a. The diameter of the lamp is 1.434

b.   The angular deceleration  is -0.00698 rad/s² and the number of revolutions made by the lamp unit in this time is  -226.194 revolutions

c.  The power needed to get the lamp up to this speed is  32.986 W

d.  The inertia of the lamp is 149,404 kg·m²

e.  The mass of the lamp is  290.12 kg

f.  The kinetic energy is 81,350.63 J

How do we calculate?

a)

tangential velocity = radius * angular velocity

angular velocity = 12 rpm * (2π rad/1 min) * (1 min/60 s)

= 12 * 2π / 60 rad/s

=  1.2566 rad/s

radius = tangential velocity / angular velocity

= 0.9 m/s / 1.2566 rad/s

=  0.717 m

diameter = 2 * radius

= 2 * 0.717 m

= 1.434 m

b)

Number of revolutions = (initial angular velocity * time) / (2π)

Angular deceleration = (final angular velocity - initial angular velocity) / time

Number of revolutions = (0 - 1.2566 rad/s) * 180 s / (2π)

=  -226.194 revolutions

Angular deceleration = (0 - 1.2566 rad/s) / 180 s

=  -0.00698 rad/s²

c)

Power = (2π * torque * angular velocity) / time

Angular velocity = 10 rpm * (2π rad/1 min) * (1 min/60 s)

=  1.0472 rad/s

Time = 25 seconds

Power = (2π * 250 Nm * 1.0472 rad/s) / 25 s

=  32.986 W

d)

Inertia = (torque * time) / (angular acceleration)

Angular acceleration = (final angular velocity - initial angular velocity) / time

= (1.0472 rad/s - 0) / 25 s

= 0.0419 rad/s²

Inertia = (250 Nm * 25 s) / 0.0419 rad/s^2

= 149,404 kg·m²

e)

Inertia = mass * radius²

Mass = Inertia / radius²

= 149,404 kg·m² / (0.717 m)²

=  290.12 kg

f)

Kinetic energy = (1/2) * inertia * (angular velocity)²

Angular velocity = 10 rpm * (2π rad/1 min) * (1 min/60 s)

= 1.0472 rad/s

Kinetic energy = (1/2) * 149,404 kg·m² * (1.0472 rad/s)²

= 81,350.63 J

Learn more about Number of revolutions at:

https://brainly.com/question/21351005

#SPJ4

A spring is pointed upward and then compressed 1.50m. A 1.20kg ball is placed on top. If the spring constant is 35.0N/m, what is the velocity of the ball as it leaves the spring?
43.8m/s
65.6m/s
8.10m/s
6.61m/s

Answers

To determine the velocity of the ball as it leaves the spring, we can use the principle of conservation of mechanical energy.

The velocity of the ball as it leaves the spring is approximately 8.10 m/s. So the correct option from the given choices is 8.10 m/s.

Explanation:

The initial potential energy stored in the compressed spring is converted into the kinetic energy of the ball when it is released.

The potential energy stored in a compressed spring is given by the formula:

                                U = (1/2)kx²

where U is the potential energy,

           k is the spring constant,

           x is the displacement of the spring from its equilibrium position.

In this case, the spring is compressed by 1.50 m, so x = 1.50 m.

The spring constant is given as 35.0 N/m, so k = 35.0 N/m.

Plugging in these values, we can calculate the potential energy stored in the spring:

          U = (1/2)(35.0 N/m)(1.50 m)²

          U = (1/2)(35.0 N/m)(2.25 m²)

          U = 39.375 N·m = 39.375 J

The potential energy is then converted into kinetic energy when the ball is released. The kinetic energy is given by the formula:

                                                     K = (1/2)mv²

where K is the kinetic energy,

          m is the mass of the ball,

          v is the velocity of the ball.

We can equate the potential energy and the kinetic energy:

                 U = K

     39.375 J = (1/2)(1.20 kg)v²

     39.375 J = 0.6 kg·v²

Now we can solve for v:

v² = (39.375 J) / (0.6 kg)

v² = 65.625 m²/s²

Taking the square root of both sides, we find:

v = √(65.625 m²/s²)

v ≈ 8.10 m/s

Therefore, the velocity of the ball as it leaves the spring is approximately 8.10 m/s. So the correct option from the given choices is 8.10 m/s.

To know more about kinetic energy, visit:

https://brainly.com/question/999862

#SPJ11

If a gas expands adiabatically, what must be true? Chose all that apply.
A• the gas must lose thermal energy
B• the gas must expand isothermally as well
C• the gas must decrease in temperature
D. no heat is lost or gained by the gas

Answers

When a gas expands adiabatically :

A. The gas must lose thermal energy.

D. No heat is lost or gained by the gas.

A. The gas must lose thermal energy: Adiabatic expansion implies that no heat is exchanged between the gas and its surroundings. As a result, the gas cannot gain thermal energy, and if the expansion is irreversible, it will lose thermal energy.

D. No heat is lost or gained by the gas: Adiabatic processes are characterized by the absence of heat transfer. This means that no heat is lost or gained by the gas during the expansion, reinforcing the concept of an adiabatic process.

Thus, the correct options are A and D.

To learn more about thermal energy visit : https://brainly.com/question/19666326

#SPJ11

a wire loop is 5 cm in diameter and is situated so that its plane is perpendicular to a magnetic field. How rapidly should the magnetic field change if 1V is to appear across the ends of the loop?

Answers

The magnetic field should change at a rate of 4.0 Tesla/s if 1V is to appear across the ends of the loop.

The magnetic field should change at a rate of 4.0 Tesla/s if 1V is to appear across the ends of the loop. A wire loop of 5 cm diameter is placed so that its plane is perpendicular to a magnetic field.

The rate of change of magnetic flux passing through the area of the wire loop is directly proportional to the induced emf, which is given by the equation:ε=−N dΦ/dt.

Where,ε is the induced emf N is the number of turnsΦ is the magnetic flux passing through the loop, and dt is the time taken. The area of the wire loop is A=πr² = π(5/2)² = 19.63 cm².

The magnetic flux Φ can be expressed as Φ = B A cos θWhere, B is the magnetic field intensity, A is the area of the wire loop, and θ is the angle between the plane of the loop and the direction of magnetic field.

In this case, the plane of the loop is perpendicular to the magnetic field, so cos θ = 1. Hence,Φ = BA Using this expression for Φ, we can write the induced emf as:ε=−N dB A/dt.

Given that 1V is to appear across the ends of the loop, ε = 1V. Hence, we get:1V = -N dB A/dt Now, substituting the values of N, A, and B, we get:1V = -1 dB (19.63 × 10⁻⁴ m²)/dt Solving for dt, we get: dt = 4.0 Tesla/s Hence, the magnetic field should change at a rate of 4.0 Tesla/s if 1V is to appear across the ends of the loop.

To know more about magnetic field refer here:

https://brainly.com/question/19542022#

#SPJ11

Consider a ray of light passing between two mediums, as shown in the figure. The distance h between points A and B is 2.00 cm. Assume the index of refraction ni in medium 1 is 1.00. Medium 1 n = 1.00 45 Medium 2 А n, = ? h B C Determine the index of refraction nz for medium 2 if the distance d between points B and C in the figure is 0.950 cm. n2 = If instead n2 = 1.54, calculate the distance d between points B and C. d = cm

Answers

1. The index of refraction, n₂ for medium 2 is 1.65

2. The distance, d between points B and C is 0.984 cm

1. How do i determine the index of refraction, n₂ for medium 2?

First, we shall obtain the angle in medium 2. Details below:

Opposite (d) = 0.950 cmAdjacent (h) = 2 cmAngle θ = ?

Tan θ = Opposite / Adjacent

Tan θ = 0.95 / 2

Take the inverse of Tan

θ = Tan⁻¹ (0.95 / 2)

= 25.4°

Finally, we shall obtain the index of refraction, n₂ for medium 2. Details below:

Index of refraction for medium 1 (n₁) = 1Angle of medium 1 (θ₁) = 45°Angle of refraction (θ₂) = 25.4°Index of refraction for medium 2 (n₂) =?

n₁ × Sine θ₁ = n₂ × Sine θ₂

1 × Sine 45 = n₂ × Sine 25.4

Divide both sides by Sine 25.4

n₂ = (1 × Sine 45) / Sine 25.4

= 1.65

Thus, the index of refraction, n₂ for medium 2 is 1.65

2. How do i determine the distance, d between points B and C?

First, we shall obtain the angle in medium 2. Details below:

Index of refraction for medium 1 (n₁) = 1Angle of medium 1 (θ₁) = 45°Index of refraction for medium 2 (n₂) = 1.6Angle of medium 2 (θ₂) =?

n₁ × Sine θ₁ = n₂ × Sine θ₂

1 × Sine 45 = 1.6 × Sine θ₂

Divide both sides by 1.6

Sine θ₂ = (1 × Sine 45) / 1.6

Sine θ₂ = 0.4419

Take the inverse of Sine

θ₂ = Sine⁻¹ 0.4419

= 26.2°

Finally, we shall obtain the distance, d. Details below:

Angle θ = 26.2°Adjacent (h) = 2 cmOpposite = Distance (d) =?

Tan θ = Opposite / Adjacent

Tan 26.2 = d / 2

Cross multiply

d = 2 × Tan 26.2

= 0.984 cm

Thus, the distance, d is 0.984 cm

Learn more about index of refraction:

https://brainly.com/question/22775236

#SPJ4

Complete question:

See attached photo

wo narrow, parallel slits separated by 0.850 mm are illuminated by 570−nm light, and the viewing screen is 2.60 m away from the slits. (a) What is the phase difference between the two interfering waves on a screen at a point 2.50 mm from the central bright fringe? rad (b) What is the ratio of the intensity at this point to the intensity at the center of a bright fringe? I max ​ I ​ =

Answers

Answer:The phase difference between the two interfering waves on a screen at a point 2.50 mm from the central bright fringe is 1.31 radians.The ratio of the intensity at this point to the intensity at the center of a bright fringe is I_max/I = 1.90 or I = 1.90 I_max.

(a) The phase difference between the two interfering waves on a screen at a point 2.50 mm from the central bright fringe is 1.31 radian.

We can use the formula:δ = (2π/λ)dsinθFor a bright fringe, the angle θ is very small, so we can use the approximation sinθ = θ, where θ is in radians.

δ = (2π/λ)dsinθ

= (2π/570 x 10⁻⁹ m) x 0.850 x 10⁻³ m x (2.50 x 10⁻³ m/2.60 m)

= 1.31 radian

(b) The ratio of the intensity at this point to the intensity at the center of a bright fringe is

Imax/I = cos²(δ/2)

= cos²(0.655)

= 0.526.

Therefore, I/Imax = 1.90 or

I = 1.90 I max.

More explanation:Two narrow parallel slits separated by 0.850 mm are illuminated by 570−nm light and the screen is 2.60 m away from the slits.

Let the angle between the central bright fringe and the point be θ.The phase difference between the two waves at the point on the screen is given by

δ = (2π/λ)dsinθ

We can assume that sinθ is approximately equal to θ in radians because the angle is very small.From the equation given above, we know that

δ = (2π/λ)dsinθ

We have the values as

λ = 570−nm

= 570 x 10⁻⁹ m.

θ = (2.50 mm/2.60 m)

= 2.50 x 10⁻³ m.

From the above equation, we can get the value ofδ = 1.31 radians.The intensity at a distance x from the center of the central bright fringe is given by:

I = I_max cos²πd sinθ/λ

Where d is the separation of the slits and I_max is the intensity of the bright fringe at the center.

From the equation given above, we know thatI = I_max cos²πd sinθ/λ We have the values as

d = 0.850 mm

= 0.850 x 10⁻³ m,

λ = 570−nm

= 570 x 10⁻⁹ m and

θ = (2.50 mm/2.60 m)

= 2.50 x 10⁻³ m.

On substituting the values in the equation, we get,I/I_max = 0.526.

Therefore, I_max/I = 1.90 or

I = 1.90 I_max.

Therefore,The phase difference between the two interfering waves on a screen at a point 2.50 mm from the central bright fringe is 1.31 radians.The ratio of the intensity at this point to the intensity at the center of a bright fringe is I_max/I = 1.90 or

I = 1.90 I_max.

To know more about screen visit;

brainly.com/question/15462809

#SPJ11

1. Using Kirchhoff's rule, find the current in amperes on each resistor. www www. R₁ 252 R₂ 32 25V 10V R3 10 +

Answers

Kirchhoff's rules are fundamental in the study of electric circuits. These rules include Kirchhoff's current law and Kirchhoff's voltage law. Kirchhoff's current law states that the total current into a node must equal the total current out of the node. Kirchhoff's voltage law states that the total voltage around any closed loop in a circuit must equal zero. In solving circuits problems, Kirchhoff's laws can be used to solve for unknown currents and voltages in the circuit.

The circuit in question can be analyzed using Kirchhoff's laws. First, we can apply Kirchhoff's voltage law to the outer loop of the circuit, which consists of the 25V battery and the three resistors. Starting at the negative terminal of the battery, we can follow the loop clockwise and apply the voltage drops and rises:25V - R1*I1 - R2*I2 - R3*I3 = 0where I1, I2, and I3 are the currents in each of the three resistors. This equation represents the conservation of energy in the circuit.Next, we can apply Kirchhoff's current law to each node in the circuit.

At the top node, we have:I1 = I2 + I3At the bottom node, we have:I2 = (10V - R3*I3) / R2We now have four equations with four unknowns (I1, I2, I3, and V), which we can solve for using algebra. Substituting the second equation into the first equation and simplifying yields:I1 = (10V - R3*I3) / R2 + I3We can then substitute this expression for I1 into the equation from Kirchhoff's voltage law and solve for I3:(25V - R1*((10V - R3*I3) / R2 + I3) - R2*I2 - R3*I3) / R3 = I3Solving for I3 using this equation requires either numerical methods or some trial and error. However, once we find I3, we can use the second equation above to find I2, and then the first equation to find I1.

learn more about Kirchhoff's voltage law

https://brainly.com/question/86531

#SPJ11

Other Questions
A customer from Cavallars's Fruit Stand picks a sample of oranges at random from a crate containing to oranges, of which 3 are rotten What is the probability that the sample stan1 amore rotten oranges? (Round your answer to three decimal places) An ice cube of volume 50 cm 3 is initially at the temperature 250 K. How much heat is required to convert this ice cube into room temperature (300 K)? Hint: Do not forget that the ice will be water at room temperature. if the sound of splash was amplified by the twenty third wellsharmonic the frequency of this sound was A Highway Bypass Will Completely Circle The City. (A) Name At Least Three Benefits And Three Costs Associated With The Bypass. (B) What Stakeholder Viewpoints Will Need To Be Considered? (C) Discusss Potential Data Sources And Methods For Estimating Each Of The Benefits And Costs. 15) Sounds betweenthere is prolonged exposure.a) 90 and 130 b) 100 and 200c) 130 and 180d) 150 and 20016) Sounds abovedecibels are only dangerous ifdecibels put someone inimmediate danger of hearing loss.a) 130 b) 200c) 180d) 15017) According to your text, humans can detect more than types of distinct smells.a) 100b) 1000c) 10,000d) 1 million18) Itching, tickling, and vibration sensations seem to be producedby light stimulation of receptors.a) pressure and painb) pain and temperaturec) temperature and pressure d) pressure, pain, and temperature19) When the brain is sorting out and attending only to the most important messages from the senses, it is engaged in the process ofa) sensory adaptationb) sensory habituationc) selective attention d) selective sorting20) After a month of having stuck a post-it note by your door to remind you of an appointment, you forgot the appointment. Thisis an example ofa) sensory adaptationb) selective perceptionc) habituationd) selective attention21) "Impossible figures" are stimuli that appear to make sense but cannot exist in actual, real space. These figuresa) define the correspondence between sensation and perceptionb) help scientists understand perceptual principles c) outline how to organize elements into a coherent wholed) define the difference between monocular and binocular cues22) refers to a binocular cue that comes from the separation of the eyes, which causes different images to fall on each retina.a) Stereoscopic visionb) Convergencec) Retinal disparity d) Linear perspective Given the linear ODE: exy' - 2y = x. The standard form of it is: y' - 2e xy = xe-x None of the mentioned y' + 2e xy = xe-x y' 2e*y = xex The Pediatrician has ordered IM Penicillin G 10000 units per kg. The patient weight is 150 lbs. How many units is the ordering dose? Round to nearest thousand place.Group of answer choicesa. 6,820 unitsb. 7000 unitsc. 682,000 unitsd. 680,000 units Batman (mass = 98.7 kg) jumps straight down from a bridge into a boat (mass=628 kg) in which a criminal is fleeing. The velocity of the boat is initially +9.88 m/s. What is the velocity of the boat after Batmanlands in it? What is the effective annual rate of interest if $1000 grows to$1500 in four years compounded semi-anually? The effective annualrate of interest as a percent is _____%. (Round the final ans Can someone rewrite these 4 sentences with 2 uses of preterite and imperfect conjugations? You may alter the sentence if necessary. 28) Your company has made the following promises to a group of employees who are retiring today: a cash flow of $300 1 year from today, a cash flow of $500 2 years from today, a cash flow of $600 3 years from today? Assume all investments earn an annual interest rate of 15%, compounded annually. (The discount rate is 15%). What is the minimum amount that the company should set aside to meet those obligations?a. $1100.00b. $1033.45c. $941.39d. $920.52e. $1058.60 Write an essay to present an argument, that either support or opposes the decision to award a singer-songwriter the Nobel Prize in Literature. Your argument should include a clear claim, logical reasons, and evidence that is relevant and sufficient. Given the following spot rates r(1)=5%,r(2)=5.62%, The one-year spot rate r(1)=5% and the forward price for a one-year zero-coupon bond beginning in one year is 0.9346. What is the spot price of a two-year zero-coupon bond? How does the relief of Christ and Disciples on the Road to Emmaus manifest the emergence of Romanesque style?subject arthas to be 250 words and please do not copy from other post in here or any student. Thank you Triangle BAC was dilated from triangle BDE at a scale factor of 2. What proportion proves that sinzD=sin/A? Se the general formula for determining a markup percentage to compute the required markup percentage using variable manufacturing cos Garden City Ltd is considering a project that would require an initial investment of $210,000 and would have a useful life of 6 years. The annual cash receipts would be $126,000 and the annual cash expenses would be $57,000. The salvage value of the assets used in the project would be $32,000. The company's tax rate is 30%. For tax purposes, the entire initial investment without any reduction for salvage value will be depreciated over 6 years. The company uses a discount rate of 10%. Required: a) Compute the net present value of the project. b) Compute the IRR of the project. c) Should Garden City proceed with project? Why? 1.Pick one of the areas of the brain important for language processing. What would happen if that area was damaged in some way?2. How is recovery influenced by the type of stroke? Why do you think the patterns of recovery differ? Reflect triangle ABC with vertices at A(0, 2), B(-8, 8), C(0, 8) over the line y = -1. Then reflect thattriangle over the y-axis. Graph all three figures. 1111. A giraffe, located 1.5m from the center of a Mary-go-round spins with a speed of 6m/s. There is a panda also in the Mary-go-round. How fast would a panda move if its 4.5m from the center(10pts)? what is the angular speed of the Mary-go-round(10pts)?