Answer:
-standard 1 kg : Kilogram (kg), basic unit of mass in the metric system.
-standard 1 meter: The standard metre is the length of the path travelled by light in vaccum during a time interval of 1/299792458 of a second.
- standard 1 second : The second (abbreviation, s or sec) is the Standard International ( SI ) unit of time.
Explanation:
HOPE IT HELPS YOU !!
Internal energy of a diatomic gas consists of:
OA. kinetic energy due to vibration and rotation.
B. kinetic energy due to translation, vibration, and rotation.
C. potential energy due to intermolecular forces.
D. kinetic energy due to translation only.
Answer:
C) Potential energy due to intermolecular forces.
A plane is flying a circular path at a speed of 55.0 m/ s, with a radius of 18.3 m. The centripetal force needed to maintain this motion is 3000 N. What is the plane's mass?
The plane has a centripetal acceleration a of
a = v ²/r
where v is the plane's tangential speed and r is the radius of the circle. By Newton's second law,
F = mv ²/r
Solve for the mass m :
m = Fr/v ² = (3000 N) (18.3 m) / (55.0 m/s)² ≈ 18.1 kg
A cycle travels along a circular track of diameter 42 m. Calculate the distance travelled and the displacement of the cycle in (a) Half round (b)One round.
please explain it to me clearly,its so confusing
i will give brainlist to the one who explains it clearly
Answer:
(a) i) The distance travelled by the cycle in half round is approximately 65.97 m
ii) The displacement is 42 m
(b) (i) The distance travelled in one round is approximately 131.95 m
(ii) The displacement of the cycle in one round is 0
Explanation:
The diameter of the track through which the cycle travels, D = 42 m
(a) i) Half round is the motion of half the length of the circular path
The distance travelled by the cycle in half round = The length of half the circular track = (1/2) × π × D
∴ The distance travelled by the cycle in half round = (1/2) × π × 42 m = 21·π m ≈ 65.97 m
ii) The displacement half round = The change in the location of the cycle = The difference between the start and stop locations of the cycle on a straight line after half round
The angle at the center of the circular path the cycle turns in half round = 180°
Therefore, the path between the start and stop location of the cycle in half round = The diameter of the circular track
The displacement of the cycle in half round = The diameter of the circular track = 42 m
(b) (i) The distance travelled in one round = The perimeter of the circular track = π·D
∴ The distance travelled in one round = π × 42 m ≈ 131.95 m
(ii) The displacement of the cycle in one round = The change in the location of the cycle
The start and stop location of the cycle after moving one round is the same, therefore, there is no change in the location of the cycle.
Therefore we have;
The displacement of the cycle in one round = 0 (no change in location of the cycle)
When extrication will involve cutting the roof off a vehicle, stabilization of the vehicle should include:
Answer:
Deflating the tires by pulling the valve stems
Explanation:
When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.
Connected to a battery that offers a d.d.p. of 3.0Volts, we have the four lamps, all identical with resistances equal to 2.0 Ohms. The association appears in the figure. Note that the switch is open, so it doesn't pass current in the circuit (it's like an off switch). When the key closes, the lamps come on. Determining the Req of the association and the total current flowing through the circuit, we will find:
Answer:
Option D. 5Ω e 0.6 A
Explanation:
1. Determination of the equivalent resistance.
We'll begin by calculating the equivalent resistance of resistor B and resistor C. This can be obtained as follow:
Resistor B (R₆) = 2 Ω
Resistor C (R꜀) = 2 Ω
Equivalent Resistance (R₆꜀) =?
R₆꜀ = R₆ × R꜀ / R₆ + R꜀ (parallel connection)
R₆꜀ = 2 × 2 / 2 + 2
R₆꜀ = 4 / 4
R₆꜀ = 1 Ω
Finally, we shall determine the equivalent resistance of the circuit. This can be obtained as follow:
Resistor A (Rₐ) = 2 Ω
Equivalent resistance of resistor B and C (R₆꜀) = 1 Ω
Resistor D (Rₔ) = 2 Ω
Equivalent Resistance (R) =?
R = Rₐ + R₆꜀ + Rₔ (series connection)
R = 2 + 1 + 2
R = 5 Ω
Thus, the equivalent resistance of the circuit is 5 Ω
2. Determination of the total current in the circuit.
Potential difference (V) = 3 V
Equivalent resistance (R) = 5 Ω
Total current (I) =?
V = IR
3 = I × 5
Divide both side by 5
I = 3 / 5
I = 0.6 A
Thus, the total current in the circuit is 0.6 A
Summary:
Equivalent resistance = 5 Ω
Current = 0.6 A
Option D gives the current answer to the question.
If no braking occurs, a total of how much power would be required to keep the railcar moving at 40 m/s
Answer:
40 kW
Explanation:
A railcar has a continuous 1000 N decelerating force any time it is in motion. If no braking occurs, how much power would be required to keep the railcar moving at 40 m/s
Solution:
Power in Physics is the rate of doing work and the work can be mechanical, electrical, etc. The S.I unit of power is the watts (W).
The power required to keep the car moving must match the work done by the friction force (decelerating force) that tends to slow down the railcar.
Work done = Force * displacement
Power = Work done / time = (Force * displacement) / time
Power = Force * (displacement / time)
Power = force * velocity = 1000 N * 40 m/s = 40000 W
Power = 40 kW
find the x component of a vector of 105 km/h at an angle of 25 degrees.
Answer:
Explanation:
First I converted the km/h to m/s, which is the more common unit for velocity. In m/s, 105 km/h is 29.2. Thus, to find the x component of the vector:
29.2cos25 = 26 m/s
If you want it in km/h:
105cos25 = 95 km/h
Which best describes a molecule?
a unit made of different kinds of elements
a unit made of only one kind of element
a unit made of two or more atoms
a unit made of a single atom
A group of two or more atoms.
A cylinder of compressed gas is at a temperature of 23 degrees. It is cooled until it reaches the pressure of 2000kPa. It has to be cooled to 90K before this happens. Calculate the starting pressure of the gas
Complete question is;
A cylinder of compressed gas is at a temperature of 23°C. It is cooled until it reaches the pressure of 2000kPa. It has to be cooled to 90K before this happens. Calculate the starting pressure of the gas
Answer:
Starting pressure = 604 KPa
Explanation:
We are given;
Initial temperature; T1 =23°C = 298 K
Final temperature; T2 = 90 K
Final pressure; P2 = 2000 KPa
From gay lussac's law, we know that;
P1•T1 = P2•T2
P1 = (P2•T2)/T1
P1 = (2000 × 90)/298
P1 ≈ 604 KPa
A body weighing 50 N is placed on a wooden table. How much force is required to set it into motion? Coefficient of friction between the table and the body is 0.3.
If the coefficient of static friction is 0.3, then the minimum force required to get it moving is equal in magnitude to the maximum static friction that can hold the body in place.
By Newton's second law,
• the net vertical force is 0, since the body doesn't move up or down, and in particular
∑ F = n - mg = n - 50 N = 0 ==> n = 50 N
where n is the magnitude of the normal force; and
• the net horizontal force is also 0, since static friction keeps the body from moving, with
∑ F = F' - f = F' - µn = F' - 0.3 (50 N) = 0 ==> F' = 15 N
where F' is the magnitude of the applied force, f is the magnitude of static friction, and µ is the friction coefficient.
¿Qué diferencia una magnitud fundamental de una derivada?
Answer:
Explanation:
Una magnitud fundamental es aquella que se define por si misma y es independiente de las demás (masa, tiempo, longitud, etc.). magnitud derivada. Una magnitud derivada es aquella que se obtiene mediante expresiones matemáticas a partir de las magnitudes fundamentales (densidad, superficie, velocidad).
E
How does the construction of dams positively affect natural resources?
by providing water for irrigation and restoring trees to areas where forests once existed
by creating reservoirs, preventing flooding, and renewing destroyed ecosystems
by preventing flooding, creating reservoirs, and providing water for irrigation
by renewing destroyed ecosystems and restoring trees to areas where forest once ersted
Answer:
by preventing flooding, creating reservoirs, and providing water for irrigation
Dams and waterways store and provide water for irrigation so farmers can use the water for growing crops. This idea goes way back into history. Irrigation is an important part of using water. In areas where water and rain are not abundant (like the desert), irrigation canals from rivers and dams are used to carry water.
Dams help in preventing floods. They catch extra water so that it doesn’t run wild downstream. Dam operators can let water out through the dam when needed.
A heavier person will have a lower blood level due to a greater amount of ___ in their
Answer:
Blood alcohol content (BAC) is a measure of the amount of alcohol that is present in the blood.
A heavier person will have a lower blood alcohol level due to a greater amount of water in their body. The more a person weighs, the more water he/she tends to have in his/her body. The water has a diluting effect on the alcohol so the BAC will be lower in comparison with a person who is slimmer and has less water in the body.
Explanation:
The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team
Answer:
the force of resistance on the right team is 360 N
Explanation:
Given;
force of the left team, = 1000 N
total mass of the right team, m = 300 kg
acceleration of the right team, a = 1.2 m/s²
The force of resistance of the right team is calculated as;
Force = mass x acceleration
Force, F = 300 x 1.2
Force = 360 N
Therefore, the force of resistance on the right team is 360 N
coulomb what is the meaning in physics??
Answer:
Coulomb, unit of electric charge in the metre- kilogram- second- ampere system, the basis of SI system of physics unit. The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.
1.8kg 42J 9.8 how high is the shelf
Answer:
2.38m
Explanation:
Use potential energy
PE= mgh
42= 1.8*9.8*h
solve for h
to get h= 2.38 m
1. A plane flying a triangular patter flies 150 km[N], then 400 km(E). What is the total displacement of the
plane after these two legs? {4}
2. Ken and Susie are standing together. Ken walks 10 m (N) and then 15 m [W]. Susie walks 25 m [E] and
then 30 m [S]. What is the displacement from Ken to Susie? {5}
3. Students are performing an experiment for their physics class and are testing their predictions for
projectile motion. They set up a system so that a beanbag is launched horizontally off one of their
desks with an initial speed of 4.2 m/s. They measure the height of the desk to be 1.3 m.
a. What is the time of flight for the beanbag? {3}
b. What is the range for the beanbag? {2}
4. A historical society is testing an old cannon on the top of an old fort that has rusted and can only be
fired horizontally. They perform a few test fires of the cannon and measure the time of flight to be
3.78 s. How high is the hill? {3}
Answer:
1. The displacement is 427.2 km.
Explanation:
1. A = 150 km North
B = 400 km East
The net displacement is given by
[tex]R =\sqrt{400^2 + 150^2 }\\\\R = 427.2 km[/tex]
Infrared telescopes are usually placed on high-flying airplanes or on satellites in space __________
Answer:
In order to improve visibility
Explanation:
Infrared telescopes are made using infrared cameras that contain infrared detectors which are solid-state and are maintained at very cold (cryogenic) temperatures
Infrared radiation is absorbed by water vapor which is present in the Earth's atmosphere, leading to the limitation of the use of infra red telescopes at high altitudes such as mountains, high flying planes or satellites
Which statement best describes how pigments affect what colors humans
see?
Answer:
the component of light reflected by that object
Explanation:
100 g of water are cooled and the enthalpy change is -12,540 J. What is the change in temperature of the water?
Answer:
-29.9907
Explanation:
c = Q / (mΔT)
You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)
then you would solve
Students are completing a lab in which they let a lab cart roll down a ramp. The students record the mass of the cart, the height of the ramp, and the velocity at the bottom of the ramp. The students then calculate the momentum of the cart at the bottom of the ramp.
A 4 column table with 3 rows. The first column is labeled Trial with entries 1, 2, 3, 4. The second column is labeled Mass of Cart in kilograms with entries 200, 220, 240, 260. The third column is labeled Height of ramp in meters with entries 2.0, 2.1, 1.5, 1.2. The fourth column is labeled Velocity at Bottom in meters per second with entries 6.5, 5.0, 6.4, 4.8.
Which trial’s cart has the greatest momentum at the bottom of the ramp?
Answer:
second column
Explanation:
Answer:
Trial 3 is the answer.
Explanation:
During the rainy season, we can observe lighting in the sky. Due to lighting, the atmospheric
nitrogen combines with atmospheric oxygen to form nitric oxide. Which among the following is a
correct statement concerning this process?
O A physical change has taken place in the atmosphere during lighting.
Ques
O No change occurred, as lighting is natural event.
A chemical change has taken place to form nitric oxide.
O All of the choices
Answer:
A chemical change has taken place to form nitric oxide.
A child who is swimming toward shore at 0.78 m/s sees shark and picks up his speed
to 1.89 m/s. He covers 17.5 m until he lands on shore. What was his acceleration?
Answer:
0.085m/s²
Explanation:
Use v²=v0²+2a(d)
solve for a
v²-v0²/2d=a
Plug in givens
1.89²-0.78²/2*17.5=a
Plug into calculator
a=0.085m/s²
A stone is thrown with an initial speed of 12 m/s at an angle of 30o above the horizontal from the top edge of a cliff. If it takes the stone 5.6 s to reach the bottom, how far does the stone travel horizontally
Answer:
[tex]d=58m[/tex]
Explanation:
From the question we are told that:
Initial Speed [tex]U=12m/s[/tex]
Time [tex]T=5.6s[/tex]
Angle [tex]\theta=30[/tex]
Generally the Newton's equation for motion is mathematically given by
[tex]d=d'+ut+\frac{at^2}{2}[/tex]
[tex]d=12cos30*5.6[/tex]
[tex]d=58m[/tex]
How are molecules composed of atoms held together?
through gravity
through friction
through chemical bonding
through hydrogen bonding
Answer:
Chemical Bonding
Explanation:
How does the construction of dams positively affect natural resources?
by providing water for irrigation and restoring trees to areas where forests once existed
by creating reservoirs, preventing flooding, and renewing destroyed ecosystems
by preventing flooding, creating reservoirs, and providing water for irrigation
by renewing destroyed ecosystems and restoring trees to areas where forest once existed
Other person is incorrect, I did the test on edg.
Answer:
A. by providing water for irrigation and restoring trees to areas where forests once existed
The construction of dams positively affect natural resources by providing water for irrigation.
What is natural resources?Natural resources serves as materials thst is found in nature which are used by humans. These natural substances are soil, water.
Therefore, building of dams can help irrigation by using water which is a natural resources.
Learn more about natural resources at;
https://brainly.com/question/24623157
what is a weed (question answer)
Answer:
A weed is a plant considered undesirable in a particular situation, "a plant in the wrong place". Examples commonly are plants unwanted in human-controlled settings, such as farm fields, gardens, lawns, and parks
what is kepler's law??
➜what is kepler's law??
[tex]\huge\red{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W}\orange{ER}}}}[/tex]
Kepler gave the three laws or theorems of motion of the orbitals bodies
[tex]{\huge {\bold{ \red{ \star}}}}{ \blue{ \bold{FIRST \: \: \: LAW}}}[/tex]
This law state that the celestial bodies revolves around the stars in elliptical orbit and star as a single focus.
Example :- Earth revolves around the Sun as assuming it as single focus
This also shows that earth revolves around the sun in elliptical orbit.
[tex]{\huge {\bold{ \blue{ \star}}}}{ \green{ \bold{SECOND \: \: \: LAW}}}[/tex]
Area covered by the planet is equal in equal duration of time irrespective of the position of the planet.
It also states that Angular momentum is constant
As Angular momentum is constant it means areal velocity is also constant.
[tex]\frac{ \triangle \: A}{ \triangle \: T} = \frac{L}{2m}△T△A=2mL[/tex]
where:-
A is the area.
T is the time.
L is the angular momentum.
M is the mass of the body.
[tex]{\huge {\bold{ \green{ \star}}}}{ \purple{ \bold{THIRD \: \: \: LAW}}}[/tex]
square of the time of the revolution is directly proportional to the cube of the distance between the planet and star in Astronomical unit.
[tex]{T}^{2} = {a}^{3}T2=a3[/tex]
where:-
T = time of revolution
a is the distance between the planet and star.
[tex]\purple\star \: {Thanks \: And \: Brainlist} \blue \star \\ {\orange{ \star}}{if \: U \: Like d \: My \: Ans} {\green{ \star }}[/tex]
Which of these would have the greatest pressure?
Group of answer choices
A large balloon with few gas molecules at a high temperature
A small balloon with many gas molecules at a low temperature
A small balloon with many gas molecules at a high temperature
A large balloon with few gas molecules at a low temperature
Which diagram shows the most likely effect when a rock is weathered by water flowing over its entire surface
Answer:
the answer to this would be D.
Answer: Its D but it might swap to another letter so keep your eye out bud pass this test good luck
Explanation:
