Di- n- pentyl ether can be converted to 1- bromopentane by treatment with HBr through essentially a(n) ________ mechanism.

Answer:

The explanation as per the given query is presented in the following paragraph.

Explanation:

Thus the above is the correct explanation.

The measured absorbance will be higher, thereby creating systematic error.

In conclusion, the measured absorbance will be higher, thereby creating systematic error.

Learn more in:

https://brainly.com/question/14919298

Answer:

CF₂

Explanation:

Let's assume we have 100 g of the gas. If that were the case we'd have

Now we convert both masses into moles, using their respective molar mass:

We can express those results as C₂F₄.

To determine the empirical formula we reduce those coefficients to the lowest possible integers, leaving us with CF₂.

Answer:

I don't know what to say . just for points

Answer:

it should be N/m or newton per meter.

Answer: The correct option is ALL OF THE ABOVE.

Explanation:

TITRATION is a type of volumetric analysis which is used for determining the concentration of solutions. In this process a specific volume of a solution is placed in a conical flask by means of a pipette and small quantities of a second solution is slowly added from a burette until the end point is reached. This is determined by a means of an indicator which shows a characteristic colour change.

During titration, the following precautions should be followed to avoid errors and maintain standardisation in the experiment.

--> Any air bubble in the burette and pipette must be removed during measurement

--> the burette tap should be tightened to avoid leakage.

--> Remove the funnel from the burette before taking any reading to avoid errors in reading the volume.

--> use the base solution such as Sodium Hydroxide Solution to rinse the burette after washing with soap and tap water:

• to remove any air bubble and fill it's tip

• to remove any residual liquid from the water and soap solution which may interfere with the results of the experiment.

• to check if the burette is in good condition.

Therefore all of the above options to the question are correct.

Answer:

Multiply the number of moles of butane by its molar mass, 58.12g/mol, to produce the mass of butane. Mass of butane = 18.8g.

Answer:

F. When everyone is together it gets hotter

Explanation:

Answer:

c. it lies near the equator

Explanation:

The electron density number as well as the sublevel letter are used to describe valence electrons in an atom. The third total energy and subbasement p, for example, is denoted by 3p. The electron configuration of oxygen, for example, is 1s^2 2s^2 2p^4, which means the first two electrons will couple up in the 1s orbital, while the following two protons will pair up in the 2s orbital.

The sample atom is Carbon with electron configuration; 1s² 2s² 2p².

The principal energy level of an electron refers to the shellp in which the electron is located relative to the atom's nucleus. In this case only 2 energy levels exist in a carbon atom; which are energy level 1 and 2

The sublevels exist within a principal energy and the electron configuration of an atom is described with consideration of energy sublevels. The sublevels in a carbon atom are;

The orbitals in this configuration are: 1s 2s 2px 2py 2pz in which case; each orbital can accommodate 2 electrons each.

Ultimately, the location of an element on the periodic table with respect to group and period are used to determine the valency and no. of energy levels in the atom of that Element.

Read more:

https://brainly.com/question/13749106

Answer:

When SO

2

is passed through an acidified solution of H

2

S, sulphur is precipitated out according to the reaction.

2H

2

S+SO

2

→2H

2

O+3S

Complete question is;

Identify the type of reaction in the chemical reaction below:

2P205 ➡️ 4P + 502

single replacement

synthesis

decomposition

combustion

double replacement

Answer:

Decomposition

Explanation:

We. An see in the question that the compound 2P205 is broken down into simpler substances which are phosphorus (P) and oxygen (O).

Now, this is a decomposition reaction because a decomposition reaction is one in which a compound is broken down into simpler substances

Answer:

The correct answer is "[tex]4.991\times 10^{-45} \ kg.m^2[/tex]".

Explanation:

According to the question,

[tex]R_{C-Cl} = 177 \ pm[/tex]

or,

         [tex]=1.77\times 10^{-10} \ m[/tex]

[tex]\alpha = 107^{\circ}[/tex]

[tex]m_{Cl}=34.97 \ m.u[/tex]

or,

      [tex]=34.97\times 1.66\times 10^{-27}[/tex]

      [tex]=5.807\times 10^{-26} \ kg[/tex]

The moment of inertia around the rotational axis will be:

⇒  [tex]I=3\times m_{Cl}\times (R_{C-Cl})^2 \ Sin^2 \alpha[/tex]

By putting the values, we get

       [tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2 \ Sin^2 (107)[/tex]

       [tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2\times 0.91452[/tex]

       [tex]=4.991\times 10^{-45} \ kg.m^2[/tex]

Answer:

5x10⁶ atoms of platium have to be laid side by side

Explanation:

1 atom of platium has a radius of 139pm = 139x10⁻¹²m. The distance that occupies 1 atom of platinum is 2 times its ratio:

139x10⁻¹²m*2 = 2.78x10⁻¹⁰m

Assuming there is no distance between to atoms of platinum, just its ratio. The amount of atoms necessary to occupy  1.39mm = 1.39x10⁻³m is:

1.39x10⁻³m / 2.78x10⁻¹⁰m =

Answer:

Yan po Ang sagot NASA pic

Explanation:

pa heart po plss

at pa vote

CORRECT ME IF IM WRONG

FOLLOW ME AND I FOLLOW BACK YOU☺️☺️☺️♥️♥️

Answer:

The movement of the earth around the sun in a fixed path or orbit is called Revolution. The axis of the earth which is an imaginary line, makes an angle of 66½° with its orbital plane. ... The earth takes about 24 hours to complete one rotation around its axis.

The electronegativity increases across the period and decreases down the group. Thus, option B is correct.

Electronegativity can be defined as the tendency of an atom to gain or attract an electron. The electronegativity has been dependent on the size of the atom, as well as the atomic number and valence electrons.

The atom with the requirement of a less number of atoms to complete its octet can easily gain the electron and thereby have high electronegativity. The atomic size also plays a role in the electronegativity of the atom.

The atom with a bigger size has the lesser force of attraction from the nucleus and thus has difficulty attracting the electron, however, the smaller size atom can easily attract the electron with the attraction force from the nucleus.

Thus, the elements with smaller sizes and a high number of valence electrons are more electronegative. In the periodic table, on moving from left to right the valence electrons increase, thus the electronegativity increases.

On moving down the group, the element size increase, thus the electronegativity decreases down the group.

The electronegativity increases across the period and decreases down the group. Thus, option B is correct.

For more information about electronegativity, refer to the link:

https://brainly.com/question/2060520

Answer:

Substrate

Explanation:

In biochemical sciences, a substrate is a substance that is acted upon by an enzyme to yield a product. Enzymes are known for catalyzing biochemical reactions. The substances that are usually worked with during this catalytic process are termed as SUBSTRATES.

Substrates, which are usually changed during the process, binds to the active site on the enzyme and form an enzyme-substrate complex.

According to this question, pyruvate is converted to lactate in a reaction that is catalyzed by the enzyme lactate dehydrogenase. This means that the compound on which the enzyme works, pyruvate, is called the SUBSTRATE.

Answer:

Explanation:

C₁₂H₂₂O₁₁

1 )

Molar mass = 12 x 12 + 22 x 1 + 11 x 16

= 144 + 22 + 176

= 342 g

2 )

100 mL of 1.0 M will contain 1.0 x0.100 = .1 mole of sucrose

0.1 mole of sucrose = 0.1 x 342 g = 34.2 g of sucrose.

So , mass of sucrose required is 34.2 g .

3 )

100 mL of .5 M sucrose = .100 x .5 mole of sucrose

= .05 mole of sucrose

.05 mole of sucrose = .05 x 342 g = 17.1 g of sucrose .

So , mass of sucrose required is 17.1 g .

Answer:

The answer is "It takes 1,70 mol of ethanol".

Explanation:

To make acetic acid, we must first write the balanced reaction that occurs of ethanol with oxygen

The response is balanced:

[tex]CH_3CH_2OH+O_2\to CH_3COOH+H_2O[/tex]

1 mol of ethanol creates 1 mol of According the equilibrium Ethanol moles, therefore, required 1.70 mol of water = 1.70 mol

Answer:

b. a H+ ion

Explanation:

The concept of conjugate acid-base pair is related to Bronsted-Lowry acid-base theory and according to this theory, acid is a proton acceptor.

In short,

conjugate base is formed when an acid donates a proton.

conjugate acid is formed when a base accepts a proton.

Answer:

The halogen is Iodine.

Explanation:

Using the ideal gas equation, we find the number of moles of gas present, n.

PV = nRT where P = pressure of gas = 1.41 atm, V = volume of gas = 109 mL = 0.109 L, n = number of moles of gas, R = molar gas constant = 0.082 L-atm/mol-K and T = temperature of gas = 398 K

Since PV = nRT, making n subject of the formula, we have

n = PV/RT

substituting the values of the variables into the equation, we have

n = 1.41 atm × 0.109 L/(0.082 L-atm/mol-K × 398 K)

n = 0.15369 atm-L/32.636 L-atm/mol

n = 0.0047 mol

Since n = m/M where m = mass of gas = 1.19 g and M = relative molecular mass of gas

So, M = m/n

M = 1.19 g/0.0047 mol

M = 252.7 g

Since halogens are diatomic the relative atomic mass is M/2 = 252.7g/2 = 126.34 g

From tables, the only halogen with this atomic mass is Iodine.

So, the halogen is Iodine.

it depends on the widths of the recesses, and if it is causing the shelf to fracture and collapse into the sea, then a massive iceberg could be called from the life she,f and the ice shelf are way more important because it holds it up

Answer:

If the gas is at STP, THE 1 mole is 22.4 liters.

Explanation:

Answer:

2.39x10⁻⁴ moles

Explanation:

As the problem asks us the number of moles of KIO₃ that were titrated, all that is required of us is to calculate how many moles of KIO₃ are there in 23.92 mL of a 0.0100 M solution (All moles in the samples are titrated).

We can do so by using the definition of molarity:

converting 23.92 mL ⇒ 23.92 / 1000 = 0.02392 L

Given is the ratio of conjugate base and conjugate acid of phosphoric acid. pH of a substance is the concentration of the hydrogen ions in its solution and higher this concentration lower is the value of pH.

pKa value is a measure of the strength of acid, it is the negative log of acid dissociation constant Ka.

Answer:

0.0238M SbCl3, 1.07M H+, 1.14M Cl-

Explanation:

The total volume of the solution is:

4mL + 5.00mL + 12.0mL = 21mL

As the volume of the SbCl3 is 5.00mL, the dilution factor is:

21mL / 5.00mL = 4.2 times

The concentration of SbCl3 is:

0.10M SbCl3 / 4.2 times = 0.0238M SbCl3

The concentration of H+ = [HCl]:

4.5M / 4.2 times = 1.07M H+

The initial concentration of Cl- is:

3 times SbCl3 + HCl = 0.10M*3 + 4.5M =

3 times SbCl3 because 1 mole of SbCl3 contains 3 moles of Cl-

4.8M Cl- / 4.2 times = 1.14M Cl-

Answer:

A fluid is a medium that has a defined mass and volume, but no fixed shape, at a constant temperature and pressure. This may include gases, liquids, plasmas, and to some extent plastic solids. A fluid can flow and deform, preventing it from carrying loads in a static equilibrium.  A fluid is always compressible and internal frictional forces always occur due to the viscosity of the fluid.

Answer:

Following are the solution to the given question:

Explanation:

For question a:

It is prevented that the atmospheric [tex]CO_2[/tex] through dissolving in the solution and make carbonic acid [tex](H_2CO_3)[/tex] which reacts with the [tex]NaOH:[/tex]

[tex]CO_2+ H_20\to H_2CO_3\\\\H_2CO_3 + NaOH \to NaHCO_3 +H_2O\\\\H_2CO_3 + 2 NaOH \to Na_2CO_3 + 2H_2O\\\\[/tex]

For question b:

For this, the [tex]NaOH[/tex] reacts with the dissolved [tex]CO_2[/tex]  so, the molarity of the [tex]NaOH[/tex] will be decreased.

For question C:

In this, the Phenolphthalein is pink in the basic solution[tex](high \ pH)[/tex] and colorless throughout the acidic solution[tex](low\ pH)[/tex].

if the solution is exposed  from the atmosphere, the [tex]CO_2[/tex] is from the air dissolving in the solution, and making the [tex]H_2CO_3[/tex] that gives the [tex]H^{+}\ ions[/tex]

[tex]\to[/tex] lower pH.

[tex]\to[/tex] colorless phenolphthalein  

For question D:

[tex]Ba(OH)_2 + 2 HNO_3 \to Ba(NO_3)_2+ 2H_2O\\\\[/tex]

Calculating the moles of[tex]HNO_3 = volume \times \text{concentration of} HNO_3\\\\[/tex]

                                                      [tex]= \frac{25}{1000} \times 0.200\\\\= 0.005\ mol\\\\[/tex]

Calculating the moles of  [tex]Ba(OH)_2= \frac{1}{2} \times\text{moles of}\ HNO_3\\\\[/tex]

                                [tex]=\frac{1}{2} \times 0.005\\\\= 0.0025 \ mol\\\\[/tex]

Calculating the volume of [tex]Ba(OH)_2=\frac{moles}{concentration\ of\ Ba(OH)_2}[/tex]

                                   [tex]=\frac{0.0025}{0.0293}\\\\=0.08532\ L\\\\= 85.32 \ mL\\\\= 85.3\ mL[/tex]

Explanation:

Esterification occurs when a carboxylic acid reacts with an alcohol. This reaction can only occur in the presence of an acid catalyst and heat. It takes a lot of energy to remove the -OH from the carboxylic acid, so a catalyst and heat are needed to produce the necessary energy.

Answer:

The Esterification ProcessEsterification occurs when a carboxylic acid reacts with an alcohol. This reaction can only occur in the presence of an acid catalyst and heat. It takes a lot of energy to remove the -OH from the carboxylic acid, so a catalyst and heat are needed to produce the necessary energy.

The Esterification ProcessEsterification occurs when a carboxylic acid reacts with an alcohol. This reaction can only occur in the presence of an acid catalyst and heat. It takes a lot of energy to remove the -OH from the carboxylic acid, so a catalyst and heat are needed to produce the necessary energy.Once the -OH has been removed, the hydrogen on the alcohol can be removed and that oxygen can be connected to the carbon. Because the oxygen was already connected to a carbon, it is now connected to a carbon on both sides, and an ester is formed.

The Esterification ProcessEsterification occurs when a carboxylic acid reacts with an alcohol. This reaction can only occur in the presence of an acid catalyst and heat. It takes a lot of energy to remove the -OH from the carboxylic acid, so a catalyst and heat are needed to produce the necessary energy.Once the -OH has been removed, the hydrogen on the alcohol can be removed and that oxygen can be connected to the carbon. Because the oxygen was already connected to a carbon, it is now connected to a carbon on both sides, and an ester is formed.The methyl acetate that was formed is an ester. In this image, the green circle represents what was the carboxylic acid (in this case acetic acid), and the red circle represents what was the alcohol (in this case methanol):

This reaction lost an -OH from the carboxylic acid and a hydrogen from the alcohol. These two also combine to form water. So any esterification reaction will also form water as a side product.

Answer:

= 35.7 amu

Explanation:

            Isotopic                fractional                                Wt Avg mass

          mass (amu)      abundance (= % / 100)       = Isotopic mass X (= % / 100)

X-35          35                         0.30                                           10.5 amu

X-36          36                         0.70                                           25.2 amu

__________________________________________________________

Average Atomic Mass of Element X = ∑ Wt. Avg. Masses = 35.7 amu

Answer:

The correct answer is - no not adhere to the law of mass conservation.

Explanation:

According to the law of mass conservation in an isolated system, the mass can not be created or destroyed and in a chemical or physical change, the mass of products should be always equal to the mass of reactants.

On the basis of the law the mass of the chemical reaction-

Mass of products = mass of reactants

33 g of methane + 289g of oxygen = 189g of carbon dioxide + 30g of water

322g ≠ 219 g

which means this reaction does not adhere to the law of conservation.

Answer:

The correct answer is A. 59.

Explanation:

The formula for finding the amount of radio active substance that remains after decomposition is A = N(1/2) ^y, where A is the mass remaining, N is the original mass of a radioactive sample and y is the number of half life. In this case, N = 10 g and y = 6/2 = 3. So A is given by 10 x (1/2)^3, which is 10 x 1/2 x1/2 x 1/2 = 1.25 grams.