g if a hand cream appears smooth and uniform after you prepared it, but after a week of storage most of the water and most of the oil separated, what do you think must have gone wrong with the preparation?

The type of reaction which occurs when the oxidation numbers of 2 or more atoms change is an oxidation-reduction{redox} reaction.

A redox (redox) reaction is a type of chemical reaction in which electrons are transferred between two species redox reaction is a chemical reaction in which the oxidation number of a molecule, atom, or ion changes by gaining or losing an electron.

There  are 2 classes of redox reactions  which are:

electron transfer where electrons flow from the reducing agent  to the oxidant

atom transfer atom transfers an atom from one substrate to another

There are different types of redox reactions which are:

To learn more about redox reactions see:

https://brainly.com/question/11965624?referrer=searchResults

#SJP4

The gas after the calculation has a molar mass of 39.95g/mol which is that of Argon. The elemental symbol of gas is Ar.

We know that 1 mol of gas has 22.4L of any gas at STP.

Given in the question is the density of the gas 1.78g/l at STP.

Hence the mass of 22.4 L of the elemental gas at STP is its molar mass.

Hence molar mass

=22.4 l/mol × 1.7824 g/L

= 39.925g/mol

These gases are called noble gases because they are majestic in nature, which means they dont react with anything in general.

To learn more about noble gases, and other chemical compounds,

https://brainly.com/question/11764545

#SPJ4

The concentration molarity of NaCl is 3.76 mol/l.

The concentration of a substance is the quantity of solute found in a given amount of solution. Concentrations are normally expressed in terms of molarity, defined because of the variety of moles of solute in 1 L of solution.

Calculation:-

mass = 21.5 g

volume = 100 ml = 0.1 L

the molar mass of NaCl = 58.5

mole = mass/molar mass

         = 21.5 / 58.5

        = 0.376

concentration = mole /volume

                        = 0.376 / 0.1

                        = 3.76

The Concentration of an answer is a measure of the quantity of solute that has been dissolved in a given amount of solvent or answer. A concentrated answer is one that has a rather huge quantity of dissolved solute.

Learn more about concentration here:-https://brainly.com/question/26255204

#SPJ4

The molar mass of this gas is  59.0 g/mol.

Molar mass is described as the mass in grams of 1 mole of a substance. The gadgets of molar mass are grams in keeping with mole, abbreviated as g/mol. The mass of an unmarried isotope of any given detail (the isotopic atomic mass) is a cost concerning the mass of that isotope to the mass of the isotope carbon-12.

Calculation:-

PV = nRT

P = 742 torr = 0.976 atm

P × molar mass = density × R × T

0.976 * molar mass = 2.34* 0.0821*300

0.976  * molar mass = 57.6

molar mass = 59.0 g/mol

Therefore, the molar mass = 59.0 g/mol

Learn more about molar mass here:- https://brainly.com/question/837939

#SPJ4

we need these set of reactions that goes from ammonia to nitric acid.

1) 4NH3(g)+5O2(g)-->4NO(g)+6H2O(g)

2) 2NO(g)+O2(g)-->2NO2(g)

3) 3NO2(g)+H2O(l)-->2HNO3(aq)+NO(g)

State the ratio of moles of HNO3 to NH3:

4 moles of NH3 produce 4 moles of NO,

4 moles of NO produce 4 moles of NO2

4 moles of NO2 produce 4 * (2 / 3) moles of HNO3 = 8/3 moles of HNO3.

=> (8/3) moles HNO3 : 4 moles NH3

Calculate the number of moles of HNO3 in 10000 l of 0.7500 M solution

M = n / V => n = M * V = 0.7500 M * 10000 liter = 7500 moles HNO3

Use proportions:

(8/3) moles HNO3 / 4 moles NH3 = 126 moles HNO3 / x

=> x = 7500 moles HNO3 * 4 moles NH3 / (8/3 moles HNO3) = 11279 moles NH3

Convert moles to grams:

molar mass NH3 = 14 g/mol + 3 * 1g/mol = 17 g/mol

mass in grams = number of moles * molar mass = 11279 moles * 17 g/mol = 191743  g

Answer: 191743 g.

learn more about nitric acid here;

https://brainly.com/question/10082840

#SPJ4

In qualitative analysis, the student should omit the steps 1B-1E which leads us to omitting steps which involves the presence of Pb and Ag.

What is qualitative analysis?

In qualitative analysis, information that is non-numerical about a chemical species, a reaction, etc. are determined. Qualitative analysis is not a reliable analysis but it often easier, faster and is a lot cheaper to perform that the quantitative analysis. Qualitative Analysis deals with the grouping or identification of elements present in the sample. It is a standard procedure to classify the methods in two classes and those are qualitative inorganic analysis and qualitative organic analysis.

Hence, In qualitative analysis if there is no precipitate, student should omit the step 1B-1E.

To know more about qualitative analysis, follow the below link

https://brainly.com/question/15858232

#SPJ4

The student should omit steps 1B through 1E, which leads us to omit steps involving the presence of Pb and Ag, when performing a qualitative analysis.

What is qualitative analysis?
Qualitative analysis is used to determine non-numerical information about a chemical species, a reaction, etc. Although qualitative analysis is less accurate than quantitative analysis, it is frequently quicker, simpler, and much less expensive to conduct. The grouping as well as identification of elements found in the sample is the focus of qualitative analysis. The methods are typically divided into two categories: qualitative inorganic analysis as well as qualitative organic analysis.

Hence, In qualitative analysis if there is no precipitate, student should omit the step 1B-1E.

To know more about qualitative analysis, follow the below link
brainly.com/question/15858232
#SPJ4

Answer:

The moon reflects the light from the sun

Explanation:

Answer:

it reflects light from the sun

Explanation:

Answer:

attached is the answer, hope it helps!!

If a balloon has a volume of 33000 L, the amount of hydrogen that would be needed to fill will be 29.46 kg.

At standard temperature and pressure, 1 mole of any gas is equivalent to 22.4 L of the gas.

The capacity of the balloon is 33000 L. The number of moles of hydrogen gas that will fill the balloon can be calculated using dimensional analysis as follows:

1 mole = 22.4 L

33000 L = 1 x 33000/22.4

               = 1473.21 moles

This means that 1473.21 moles of hydrogen will be required to fill the balloon.

Recall that: mole = mass/molar mass

Hence: mass = mole x molar mass

Molar mass of hydrogen gas = (1+1)

                                                = 2 g/mol

We can then use the above formula to calculate the mass of 1473.21 moles of hydrogen.

mass of 1473.21 moles hydrogen = 1473.21 x 2

                                                       = 2946.43 grams

2946.43 grams to kg = 2946.43/1000

                                   = 29.46 kg

In other words, if a balloon has a capacity of 33000 L, the amount of hydrogen that would be required to fill it will be  29.46 kg.

More on the volume of gases at STP can be found here: https://brainly.com/question/28366842

#SPJ1

In the reaction catalyzed by aconitase, the conversion of citrate to isocitrate is inhibited by fluoroacetate fluoroacetate is used as a pesticide this an effective pesticide because it inhibit the Krebs cycle

Aconitase catalyzes the reversible isomerization of citrate and isocitrate and it is the second enzyme in the citric acid cycle and which is a series of enzymes catalyst chemical reaction that is crucial to aerobic cellular respiration and the production of ATP and citrate is isomerized by dehydration and rehydration to isocitrate and fluoroacetate is the highly toxic towards the human and other mammals through inhibition of the enzyme aconitase in the tricarboxylic acid cycle and that's why fluoroacetate effective pesticide because it inhibit the Krebs cycle

Know more about fluoroacetate

https://brainly.com/question/29309885

#SPJ4

High explosive elements should be placed on the right side of the periodic table and lower explosive elements should be placed on the left side.

We will organize the periodic table starting from least explosive to high explosive just like the arrangement is done in the modern periodic table in which elements having lower atomic numbers are present on the left side of the periodic table whereas the elements having higher atomic numbers are placed on the right side of the periodic table.

What is the periodic table?

The periodic table is the tabular arrangement of all the chemical elements on the basis of their respective atomic numbers.

Why the periodic table is important?

The periodic table of elements puts all the known elements into groups with similar properties.

Thus, lower explosive elements are placed on the left and high explosive elements are placed on the right of the periodic table.

To know more about the periodic table:

https://brainly.com/question/25916838

#SPJ4

Answer:

A.

Explanation:

A probe was sent to record the event

An generally pro of HBr results in a molecule called halohydrin in this process. The oxygen carrier in the epoxide will be protonated by the hydrogen, and then the bromide ion will attack the more.

Stereochemistry is the study of a material's four structural elements. The location of the particle's electrons in 3 dimensions is the only structural distinction between the enantiomers known as cis and trans isomers. There may be differences in the physicochemical characteristics of these stereoisomers.

Chemists can determine the connections between several molecules consisting of the same atoms by using stereochemistry. They can also research how these linkages affect the physical and biological characteristics that molecules possess.

To know more about stereochemistry  visit:

https://brainly.com/question/17228247

#SPJ4

The mass of hydrogen necessary to react with 50.0g of nitrogen in the reaction of ammonia is 10.8g.

What is ammonia?

Ammonia is a colorless gas which when dissolved in water readily gives ammonium hydroxide which causes irritation. It can also be used as cleaning agent also it is a pungent gas composed of hydrogen and nitrogen.

According to the given equation of ammonia formation,

N2 + 3H2 -------> 2NH3

there is 1 mole of nitrogen reacting with 3 moles of hydrogen to give 2 moles of ammonia. In terms of mass, 28.01g of nitrogen needs 3 moles of hydrogen that is 6.048g of hydrogen.

We can say that,

28.01g of N2 requires 6.048g of hydrogen,

1g of N2 requires = 6.048 / 28.01 = 0.048g

50g of N2 requires = 0.048 x 50.0 = 10.8g of H2.

Therefore, 10.8g of H2 is required to react with 50.0 g of N2 to make ammonia.

To learn more about ammonia click on the given link https://brainly.com/question/14445062

#SPJ9

Answer:

its a

Explanation:

10.8 g H2

The molecular formula of acetic acid is C[tex]_2[/tex]H[tex]_4[/tex]O[tex]_2[/tex].

In 100 g of sample of acetic acid,

the concentration of Carbon (C) is 40 g,

the concentration of Hydrogen (H) is 6.714 g,

the concentration of Oxygen (O) is 53.29 g

To calculate the no. of moles, mass is divided by molar mass.

Therefore, no. of moles of C = 40/12 = 3.33

No. of moles of H = 6.714/1 = 6.71

No. of moles of O = 53.29/16 = 3.33

As the ratio of the elements is 1C : 2H : 1O, thus, empirical formula is      CH[tex]_2[/tex]O

The molecular mass of the empirical formula CH[tex]_2[/tex]O is 12 + 1(2) + 16 = 30g/mol. Since the molar mass of acetic acid is 60.05 g/mol and the molecular mass of the empirical formula was found to be 30 g/mol, the subscripts of the empirical formula are multiplied by (60.05/30) 2, to get the molecular formula. Thus the molecular mass of acetic acid will be     C[tex]_2[/tex]H[tex]_4[/tex]O[tex]_2[/tex]

To learn more about empirical formulas,

brainly.com/question/1363167

#SPJ4

The bond length or separation between the two nuclei of X in a molecule of X2A with elemental bond length of 2.22A and 4.28A is 6.5A.

What is bond length?

The bond length or bond distance can be defined as the average distance between the nuclei of the bonded atoms in the given molecule. If it is a polyatomic molecule the bond distance can be calculated by adding the atomic radius of all the atoms involved in bonding.

The separation or bond length of the molecule X2A can be calculated as,

The bond length of elemental A = 2.22A

The atomic radius of A = 2.22 / 2 = 1.11A

The bond of elemental X = 4.28A

The atomic radius of X = 4.28 / 2 = 2.14A

The bond length of molecule X2A = (2.14 + 1.11) x 2 = 6.5A.

Therefore, the bond length or separation between the atoms X in the given  molecule is 6.5A.

To learn more about the bond length click on the given link https://brainly.com/question/16012396

#SPJ1

Alchemy was a form of speculative thought that, among other aims, tried to transform base metals such as lead or copper into silver or gold. It also sought to discover cures for diseases and a way of extending life.

Today we know that the universe is made up of atoms and elements. Since lead and other metals are not composed of fire, air, earth, and water, it's not possible to adjust the percentages of those elements and turn them into gold.

(Unfortunately, it turns out that alchemy, at least in its purest form, can’t be done. You can’t turn any metal into gold, no matter how much sorcery or chemicals or mystical charms you use. )

I hope I helped

Answer:

392.4 J

Explanation:

Potential Energy = m g h = 20 * 9.81 * 2 = 392.4 J

Answer:

each element gains one proton as you move from left to right across a period, atomic number is the number of protons

careful not to confuse it with the mass number which is the number of protons and neutrons.

also remember that in any given element, the proton number is always equal to electron number as they have opposite charges that cancel off, this is why elements are neutral.

The net ionic equation for the reaction of solid barium carbonate with an aqueous solution of hydrochloric acid is,

BaCO3 (s) + 2H+ (aq) -----> Ba2+ (aq) + H2O (l) + CO2 (g)

What is a net ionic equation?

The net ionic equation is an equation in which the ions which are actively participating in a reaction are present. The ions which do not undergo any change is removed from the equation. So these ions are called as spectator ions.

The overall reaction of solid barium carbonate with an aqueous solution of hydrochloric acid can be written as,

BaCO3 (s) + 2HCl (aq) -------> BaCl2 (aq) + H2O (l) + CO2 (g)

Here the spectator ions are chloride (Cl-) ions.

Therefore, the chloride ions are removed from the overall reaction to write the net ionic reaction as,

BaCO3 (s) + 2H+ (aq) ------> Ba2+ (aq) + H2O (l) + CO2 (g)

To learn more about net ionic reactions click on the given link https://brainly.com/question/19705645

#SPJ4

The hydrogen atoms would show a signal with a chemical shift between 4.5 and 6.5 is the methyl group

A small molecule consists of one carbon atom and three hydrogen atoms. Methyl groups are attached to or extracted from proteins or nucleic acids and can change the way these molecules function in the body. Stable. Functional groups generally do not react except in the presence of very strong acids or bases.

Despite this stable structure, methyl groups can become trapped in a process known as 'methylation' where the entire functional group is transferred to another molecule. Epigenetics, gene expression, liver detoxification, and neurotransmitter synthesis all rely on this enzyme-mediated response.

Learn more about the methyl group in

https://brainly.com/question/12904781

#SPJ4

If a non-diabetic person ingests carbon in the form of sugar than carbon is likely to be released from their body in the form of CO₂.

The pancreas releases glucagon while the awareness of glucose inside the bloodstream falls too low. Glucagon causes the liver to transform stored glycogen (the multibranched polysaccharide of glucose in frame storage) into glucose, which is released into the bloodstream.

The absorption price of fructose alone from the small gut is slower than that of glucose. this is partially due to the differences in the absorption manner between the two monosaccharides. Glucose is absorbed from the intestine into the plasma thru more than one active glucose co-transporter protein.

Learn more about absorption here:-https://brainly.com/question/26061959

#SPJ4

The concentration of the KBr solution is 0.168 M.

What is molarity?

The quantity of a substance in a given volume of solution is known as its molarity (M). The number of moles of a solute each liter of a solution is known as molarity. The molar concentration of a solution is another term for molarity.

Explanation:

M1V1 = M2V2,

where M1 is the initial concentration,

V1 is the initial volume,

M2 is the concentration,

V2 is the total final volume.

Have to find the initial and final volume of the solution,

V1=100/1000=0.1

V2=500/1000=0.5

By rearranging the above equation, we get

M2=M1V1/V2

=0.840 x 0.1/0.5=0.168 M.

Therefore, the concentration of the KBr solution is 0.168 M.

To learn more about molarity from the given link.

https://brainly.com/question/26873446

#SPJ4

A gas at 65.0°C occupies 4.22 L. If the pressure remains the same, at which Celsius temperature will the volume be 3.87 L out to be 310 degrees

You can leave the pressure out of both sides of the equation since the pressure is constant to make it easy.

so all you have is volume over Temp = new volume over new temp which is we don't know.

4.22 liters over 338 Kelvin = 3.87 liters over T

cross multiply and solve for T which comes out to be 310 degrees K or 37 degrees C

Yes you are right it is 310

Learn more about volume https://brainly.com/question/1578538

#SPJ1

1. Heat energy is absorbed

2. The amount of heat absorbed is 25104 J

1. How do I know if heat is absorbed or released?

From the question given, we can see that the temperature of the water moved from 10.0°C to 40.0 °C. This simply means the water absorbed heat to increase its temperature.

2. How do I determine the heat absorbed?

The heat absorbed can be obtained as follow:

Q = MCΔT

Q = 200 × 4.184 × 30

Q = 25104 J

Thus, the heat absorbed is 25104 J

Learn more about heat absorbed:

https://brainly.com/question/16398667

https://brainly.com/question/29224546

#SPJ1

ph = 1.5E.8 and pressure = 44.64 kj/mol of carbon dioxide.

Pressure is defined as the force perpendicular to an object's surface divided by the area across which it is dispersed.

Overpressure is the pressure that exists in comparison to the atmospheric pressure. To express pressure, various units are employed. Manometer, differential, and absolute pressure measurements are the three methods available.

Absolute pressure is defined in terms of vacuum pressure. l. Water's pH level reveals how basic or acidic it is. 7 serves as a neutral value in the range of 0 to 14, with. A pH value more than 7 indicates basicness, and a pH value less than 7 indicates acidity. In actuality, the pH scale gauges the percentage of free hydrogen and

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ4

Answer:

By collecting the rainwater carefully without allowing for any contamination one can then determine by an instrument known as a pH meter the acidity of the solution.

Explanation:

Answer:

About 0.965 mol Na

Explanation: