Greater force over a period of time results in a higher initial jump velocity. This statement reflects the law of reaction.
The law of reaction states that every action has equal and opposite reaction. This can be explained as, if one body exerts a force on another body, the second body exerts a force on the first body which is equal in magnitude but opposite in direction.
For example, when you walk on the earth, your weight acts in the downward direction. And the same force is applied by the earth on you but this force is in the opposite direction.
This is also explained by Newton's third law of motion.
To know more about law of reaction:
https://brainly.com/question/15314777
#SPJ4
What are the sources of Earth's internal heat namely radiogenic heat and primordial heat?.
The Earth's internal heat is generated from two main sources, namely radiogenic heat and primordial heat. Radiogenic heat is generated from the decay of radioactive elements inside the Earth's interior.
These elements such as uranium, thorium and potassium are found in the mantle and in the core of the Earth. When these elements decay, they release energy in the form of heat. Primordial heat is the heat generated by the Earth since its formation 4.5 billion years ago. This heat is a result of the energy released during the formation of the Earth from the condensation of dust and gas from the solar nebula. The heat from this process is still present in the Earth's interior and is responsible for the movements of the Earth's mantle.
Learn more about solar nebula at : https://brainly.com/question/14151385
#SPJ4
A 200 newton box is dragged at a constant velocity with a rope of tension 150 newtons.
(a) Find the frictional force
(b) Find the coefficient of friction
Assume that the coefficient of kinetic friction among all surfaces is 0. 400.
The newton is the unit of pressure inside the international machine of devices. it is described as 1 kg⋅m/s², the pressure which gives a mass of one kilogram and an acceleration of one meter according to 2nd in step with 2d.
The newton is the standard worldwide unit of pressure. In physics and engineering documentation, the time period newton is generally abbreviated N. One newton is the force required to cause a mass of one kilogram to boost up at a fee of 1 meter per 2nd squared within the absence of other force-producing consequences.
A newton is the international unit of measure for pressure. One newton is equal to a 1-kilogram meter consistent with 2d squared. In simple English, 1 newton of pressure is the force required to boost up an item with a mass of 1 kilogram 1 meter in keeping with 2nd in step with 2d.
Learn more about newtons here:-
https://brainly.com/question/25545050
#SPJ1
an object is moving with uniform circular motion. does the centripetal force do any mechanical work on the object? group of answer choices
If an object is moving with uniform circular motion, the mechanical work on the object due to centripetal force is zero
W = F d cos θ
W = Work done
F = Force
d = Distance
θ = Angle between force and displacement vector
In a circular motion, the centripetal force acts towards the center of the motion at any point in its motion.
The radial displacement at any point in the motion is tangential to the direction of motion. This means that the force and displacement vector are perpendicular to each other.
θ = 90°
W = F d cos 90°
W = 0
Therefore, if an object is moving with uniform circular motion, the mechanical work on the object due to centripetal force is zero
To know more about work done
https://brainly.com/question/12834956
#SPJ1
The trunk of a elephant may extend up to 2.2 m. It acts much like an organ pipe only open at one end when the elephant blows air through it.
1) Calculate the fundamental frequency of the sound the elephant can create with its trunk. (Express your answer to two significant figures.)
(express in Hz)
2) If the elephant blows even harder, the next harmonic may be sounded. What is the frequency of the first overtone? (Express your answer to two significant figures.)
(express in Hz)
The calculated answers are- Fundamental frequency is 38.63 Hz and frequency of the first overtone is 115.90 Hz.
How to calculate the frequencies for a elephant trunk which behaves like an organ pipe?Any integer multiple of a pipe's fundamental or natural frequency is considered to be a harmonic. When an antinode is present at one or both of the pipe's open ends, open air columns will naturally resonate at specific frequencies (a closed end of the pipe has a node). For an open-closed pipe, the following equation is used to determine the harmonic frequencies:
[tex]f = \frac{nv}{4L}[/tex]
where,
f = frequency
n = harmonic number
v = speed of sound
L = length of pipe in meters
An organ pipe with a closed end can be used to represent the elephant's trunk; in pipes, closed ends represent nodes and open ends represent antinodes or bellies.
The formula for this system's wavelengths is-
4L = nλ
where n = 1, 3, 5, 7..
1) To calculate the fundamental frequency (n = 1):
f = 340 / 4 × 2.2
f = 38.63 Hz
2) To calculate the frequency of the first overtone (n = 3):
f = 3 × 340 / 4 × 2.2
f = 115.9 Hz
To know about waves in organ pipe at:
https://brainly.com/question/14070564
#SPJ4
The muzzle velocity of a projectile fired from a gun has an upward component of 49 m/s and a horizontal component of 60 m/s
what maximum height does the projectile reach
A projectile having a muzzle velocity of 60 m/s and a vertical component of 49 m/s will travel 600 metres horizontally when shot from a gun.
Equation:
Where t represents the horizontal component of its velocity, the horizontal distance is equal to vt.
v = 60 m/s,
t = 10 seconds,
x = 60, and 10 seconds equal
= 600 metres.
According to the Law of Inertia, a particle's state won't change if there is no external force acting on it. As a result, whether it is moving or at rest, it will continue to move at the same constant speed indefinitely.
The vertical component of a particle's velocity changes continually throughout projectile motion because of the weight of the projectile acting in the vertical direction.
However, because there is no force pushing in the horizontal direction, the object, which maintains a constant horizontal velocity.
To know more about velocity, visit
https://brainly.com/question/18084516
#SPJ9
A ball of mass m moving with velocity v collides with another ball of mass 2m and sticks to it. The velocity of the final system is:A. v/3B. v/2C. 2vD. 3v
The velocity of the final system is v/3. Option A.
Solution:
The momentum of the body is defined as:
p = mv
The initial momentum of the body:
pi = mv
The final momentum of the two bodies after the collision is :
pf = (m+2m)v 1
By using the conservation of linear momentum for the collision between the bodies:
mv = (m+2m) v1
v/3 =v 1
Velocity is the primary measure of object position and velocity. It can be defined as the distance traveled by an object in a unit of time. Velocity can be defined as the displacement of an object in a unit of time. Velocity is the speed at which something moves in a particular direction. For example, the speed of a car traveling north on a highway, or the speed of a rocket after launch.
Learn more about Velocity here:-https://brainly.com/question/25749514
#SPJ4
what distance should one speaker be placed behind the other for the sound to have an amplitude 1.90 times that of each speaker alone?
calculate te rate of some raction that obeys avrami kinetics assuming that the constants n and k have vlaues of 1.7
If n and k are equal, the rate of a process that follows Avrami equation is 0.093 s.
K and N in the Avrami equation are what?Here, n is a constant with an usual range of 1 to 4 and K(T) is indeed a thermally activated, air temp constants (K(T) = Ko exp [E/kT]). The nucleation and growth terms that are time- and temperature-dependent have both been absorbed by constant K(T) in this form.
Avrami exponent: What is it?For volume precipitates inside the placed directly by one-dimensional (1D) growth, the Avrami kinetic notation is equal to 1, for precipitates on the surface followed by 1D growth from the surface inside the material, to 2, for quantity nucleation and 2D growth, and to 4, for volume crystallization and 3D growth.
Briefing:Avrami Kinetics-compliant reactions occur at a rate of 0.093 s1.
Given data:
n = 1.7
k = 0.007
let's assume y = 0.5
where : n = 1.7, y = 0.5, k = 0.007,
Insert values into equation ( 2 )
t = 10.74 secs
Rate = 1 / t = 1 / 10.74
= 0.093 s⁻¹
We may then state that 0.093 s is the reaction that follows Avrami kinetics.
To know more about Avrami Kinetics visit:
https://brainly.com/question/14086110
#SPJ4
What is the process through which majority of ATP is produced?.
The process human cells use to generate ATP is called cellular respiration.
In cellular respiration there is a phase of electron transport chain and it produces majority of ATP.
The two ATP-producing processes can be viewed as glycolysis (the anaerobic part) followed by aerobic respiration (the oxygen-requiring part).
Aerobic reaction can be defined as biological and chemical processes that occurs in the presence of oxygen.
Hence, an aerobic reaction requires oxygen before it can take place or occur and it produces adenosine triphosphate (ATP) as one of its end product.
In aerobic respiration, there are two main processes:
Krebs cycleElectron chain transportIt is the electron chain transport, that produces maximum ATPs. This is a stage in cellular respiration.
In mitochondria, between the matrix and inner mitochondrial space, an electron gradient is produced by the function of ETS. This ETS gets electron from NADH and FADH₂. This proton motive force is utilized for ADP and ATP and this production is called oxidative phosphorylation. This is called phosphorylation and along with phosphorylation it also has oxidation. The proton gradient helps in the generation of large amount of ATP molecules through chemiosmosis.
ATP are produced by ATPase enzyme.
Therefore, the process through which majority of ATP is produced is through the process of Electron chain transport.
To know more about ATP, refer: https://brainly.com/question/2563881
#SPJ4
Which formula is equivalent to D equals m over V?.
The formula equivalent to D=m/V is V=m/D.
The mass of a substance per unit of volume is referred to as density. This is represented in the formula as, D=m/V.
Here, D is density, m is mass, and V is the volume. To find which formula is equivalent to this formula, we have to follow the below steps.
Since V is present on left in all the given options. So let's take V as the subject of the formula.
By doing so, bring V to the left side of the density formula. Therefore,
VD=m
To eliminate D on the left side, divide both sides by D. We get,
[tex]\begin{aligned}\frac{VD}{D}&=\frac{m}{D}\\V&=\frac{m}{D}\end{aligned}[/tex]
So, the correct option is A.) V=m/D.
The complete question is -
Which formula is equivalent to D = m/V?
A.) V= m/D
B.) V = mV/D
C.) V = Dm
D.) V = D/m
To know more about density,
https://brainly.com/question/952755
#SPJ4
Find the range of a projectile launched at an angle of 45 with an initial velocity of 25m/s.
The range of a projectile launched in this problem is 62.5 m.
Given that, θ = 45°
v₀ = 25 m/s
Consider, g = 10 m/s²
Projectile motion is a kind of motion in which the object is projected from the earth's surface and moves along a curved path following a constant acceleration under the action of gravity.
For example, the trajectory of water from a pipe, we observe that water does not immediately fall on the earth after it comes out of the pipe. It follows a parabolic route.
The maximum horizontal distance (d) travelled by the object is given by the formula,
d = v₀² sin(2θ)/g = 25²* sin 90°/10 = 62.5 m
Thus, the range is 62.5 m.
To know more about projectile motion:
https://brainly.com/question/19128146
#SPJ4
an object floats in water, with 40 %% of its volume submerged. part a what is its approximate density?
The approximate density = 600Kg/m³
To calculate the density of the object we have to consider volume of the object and the buyoant force.
How to calculate the density of the submerged object?
Let the volume of the object be V
Volume of object under water be Vw
Let Vw = V - 40V/100
Vw = 100V- 40V/100
Vw= 60V/100
Vw= 0.6V
Let P be the density of the object
We know, Buoyant force Fb = Vw×Pw×g
g = acceleration due to gravity
If buoyant force = weight of the object
Then
0.6V × Pwg = PVg
P= Pw× 0.6
Now, density of water = Pw = 1000
P = 1000× 0.6
P = 600 Kg/m³
Hence, density of object = 600 Kg/m³
To know more about buoyant force, click on https://brainly.in/question/53520
#SPJ4
assume that the market for beef is perfectly competitive and in equilibrium. which of the following would most likely result in an increase in both the equilibrium price and the equilibrium quantity of beef?
The equilibrium price and the equilibrium amount of beef will both rise in response to a decline in the supply of beef.
How to explain this reduction in beef supply?When supply and demand, as well as financial forces, are in balance, there is economic equilibrium, and the values of economic variables do not change in the absence of external influences.
When supply and demand are in balance, the number of people who want to purchase an item determines the demand. This cycle has a number of variables, and if it continues to rise, the last minimal cost can enable a person to purchase an item. For instance, if you purchase ice cream every day and the price keeps rising, even if it is only by a cent, this ongoing rise in price could result in the last cent becoming an obstacle.
Know about equilibrium quantity at:
https://brainly.com/question/29416359
#SPJ4
according to nebular theory, in what order did the solar system form? group of answer choices contraction of solar nebula -> condensation of solid particles -> accretion of planetesimals -> clearing the disk accretion of planetesimals -> contraction of solar nebula -> condensation of solid particles -> clearing the disk contraction of solar nebula -> accretion of planetesimals -> clearing the disk -> condensation of solid particles accretion of planetesimals -> contraction of solar nebula -> clearing the disk -> condensation of solid particles
According to nebular theory, the order in which the solar system formed was
contraction of solar nebula -> condensation of solid particles -> accretion of planetesimals -> clearing the disk
The correct option is a.
What do you mean by Solar Nebular Hypothesis?As the nebula shrank, the initial rotation accelerated, much like a spinning skater pulling in his arms to spin faster. The rotating cloud shrunk and became flattened into a disc. The center of the disc held the majority of the material. Out in the disc, matter accumulated in smaller clumps. These evolved into the planets. By accretion of the matter that was falling in toward the center of mass, the proto-sun and proto-planets grew. As the contraction increased the pressure, the solar nebula warmed. The solar nebula was heated by the proto-heat, sun's especially the inner nebula. The birth of the sun. By this point, the planets had nearly all of their mass, but a heavy meteor bombardment persisted for another half a billion years or so.
Who discovered the nebular theory?The nebular hypothesis was proposed by a mathematician from France named Pierre Simon Laplace, around 200 years ago.
To know more about Nebular theory, visit the link
https://brainly.com/question/4265547
#SPJ4
I understand that the question you are looking for is:
According to nebular theory, in what order did the solar system form? group of answer choices
a. contraction of solar nebula -> condensation of solid particles -> accretion of planetesimals -> clearing the disk
b.accretion of planetesimals -> contraction of solar nebula -> condensation of solid particles -> clearing the disk
c.contraction of solar nebula -> accretion of planetesimals -> clearing the disk -> condensation of solid particles
d.accretion of planetesimals -> contraction of solar nebula -> clearing the disk -> condensation of solid particles
which of the following, which entails anxiety, unhappiness, and a critical reappraisal of one's life, possibly provoking dramatic changes, is claimed to be common in middle adulthood?
Midlife crisis involves anxiety, unhappiness, and a critical reappraisal of one's life, possibly provoking dramatic changes, is claimed to be common in middle adulthood.
How does midlife crisis affect middle adulthood and entails anxiety?Midlife crisis: A condition which includes anxiety, sadness, and a critical evaluation of one's life, is said to be prevalent in middle adulthood and may lead to drastic changes. As people adjust to midlife, this crises may have an impact on their sense of self and their level of confidence, which may modify their moods, behaviors, emotions, and interpersonal interactions. It is experienced from the age of 40 and lasts till the age of 60.
It is believed that feelings of depression, regret, and worry increase with age. And while many struggle to accept the truth that their lives are just half gone, a midlife crisis is a period that makes them feel young again.
To know more about midlife crisis, visit:
https://brainly.com/question/11847787
#SPJ4
What is the meaning of radiogenic heat?.
Radiogenic heat may be described due to the type of warmth that is released when radioactive isotopes disintegrate. Consequently, we say that, the thermal strength is launched by means of the nuclear disintegration of the radioactive isotopes.
Radio active heating refers to the power dissipated within the interiors of planets, asteroids, satellites, as a consequence of radioactive decay of radioactive isotopes. Radioactive isotopes are characterised by their decay energies and their half lives.
Around 50% of Earth's inner warmness originates from the radioactive decay. Four radioactive isotopes are chargeable for the general public of radiogenic warmness because of their enrichment relative to different radioactive isotopes uranium-238, uranium-235, thorium-232 and potassium-40.
To know more about heat:
https://brainly.com/question/29550729
#SPJ4
Velocity of propagation In an experiment to illustrate the propagation of sound through fluids, identical sound sources emitting at 440 Hz are used to propagate sound waves through mercury and through ethanol. Medium Speed of sound Ethanol Mercurv (m/s) 1,160 1,450 1) Which of the following statements is correct, assuming that the dampening effect in each medium is negligible? In mercury, the frequency of the wave is the same as in ethanol, but the wavelength is greater. In ethanol and mercury, the wavelength of the wave is the same, even if the speed of sound is different. Submit (Survey Question) 2) Briefly explain your answer to the previous question.
The waveform in mercury has the same velocity as the wave in ethanol, but it has a longer wavelength.
What, for example, is velocity?Its velocity is the speed at which something moves in one side or another. as quickly as an automobile driving north on an expressway or as quickly as a rocket lifting off. Since the velocity vector is a scalar, its absolute value is always equal to the speed of the motion.
Can velocity reverse itself?An object's velocity is the rate at which its position changes over time (displacement). While velocity, which incorporates both speed and direction, can be either favorable or unfavorable, speed can only be good.
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
An infinite conducting sheet lies in the xy plane. It has a width of 4.5 cm and a current density of 5200 A/m2 in the negative y-direction. An electron (me= 9.11×10−31 kg and qe=−1.60×10−19C) moves parallel to the sheet with a velocity of 2.5 ×10 6m/s in the positive y-direction and with an initial z-position of 4.0 cm. What is the the direction of the force on the electron?
(a) z
(b) -y
(c) y
(d) x
(e) -z
Option (d) is correct, According to the given conditions here we apply the right hand rule, the force pushing on an electron is travelling in the x direction.
The width of sheet is: wo=4.5cmwo=4.5cm, The current density is: σo=5200A/m2σo=5200A/m2, The mass of electron is: me=9.11×10−31kgme=9.11×10−31kg, The charge of electron is: qe=−1.60×10−19Cqe=−1.60×10−19C, The velocity of electron is: Ve=2.5×106m/sVe=2.5×106m/s, The initial position of electron is: z = 4.0cmz = 4.0cm
Io=oAo(I) The expression for the current produced by the sheet is Io=oAo. (I)
Ao=wozAo=wozis the formula for sheet area.
Change the value in the previous expression.
Ao=0.045m×0.04mAo=0.0018m2
Ao=0.045m×0.04mAo=0.0018m2
It is necessary to adjust the value in the expression (I) to Io=5200A/m20.0018m2Io=9.36A.
The magnetic field equation is Bo=sIo2z. Bo=μsIo2πz
The term "permeability of open space" (ss) is used here.
The value of an open space's permeability is as follows: s=4107T.m/A
Change the value in the previous expression.
Bo=4π×10−7T.m/A×9.36A2×π×(0.04m)
Bo=0.0000468TBo=4π×10−7T.m/A×9.36A2×π×(0.04m)
Bo=0.0000468T
The force on an electron has the formula Fo=qeBoVe.
Fo=qeBoVe
Change the value in the previous expression.
Fo=−1.60×10−19C×2.5×106m/s×0.0000468TFo=−1.872×10−17NFo=−1.60×10−19C×2.5×106m/s×0.0000468TFo=−1.872×10−17N
According to the right hand rule, the force pushing on an electron is travelling in the x direction.
To know more about electron please refer: https://brainly.com/question/1255220
#SPJ4
a spherical snowball is melting. its radius is decreasing at 0.1 cm per hour when the radius is 15 cm
The decreasing radial function has Q= 6.556994.
Given-
Radius of the snowball decreases as the function is decreasing.
The rate is -0.1cm per hour , i.e. 0.01m per hour.
Radial distance of the quadrupole is 15cm , i.e. 0.15m.
[tex]Q=k\frac{1}{\sqrt{4\pi \alpha x} } +Ky^2\\\\Q=\left \{ {{K=0} \atop {y\neq 0}} \right.[/tex]
[tex]Q=k\frac{1}{\sqrt{4\pi \alpha x} }[/tex]
The dipole moment of the snowball has shift or rise in the function.
This is rise in dielectric constant.
x=0.15m
α=0.1
k=9
Calculations-
Q=9 (1/√4x3.14x0.15
Q=9/√1.884
=9/1.37258
Q=6.556994
To know about dielectric constant-
https://brainly.com/question/13265076
#SPJ4
If 1 cm represents 20 m/s, draw a velocity vector of 30 m/s toward the right.
The velocity vector of 30 m/s is represented by forward arrow of 1.5 cm.
---------(1.5 cm)-----------> 30 m/s
What is velocity vector?
A velocity vector represents the rate of change of the position of an object.
The magnitude of a velocity vector gives the speed of an object while the vector direction gives its direction.
Velocity vectors can be added or subtracted according to the principles of vector addition.
A velocity vector can be represented graphically, by using simple arrow illustration as shown below;
if 1 cm ---------> 20 m/s
? cm ------------> 30 m/s
= 30 m/s/ (20 m/s / cm)
= 1.5 cm
The velocity vector of 30 m/s = ---------(1.5 cm)-----------> 30 m/s
Learn more about velocity vector here: https://brainly.com/question/14378093
#SPJ1
what happens if you put water and sugar water next to each other with a membrane in between them? osmosis
Sugar molecules displace water molecules, so when sugar is added to water, the concentration of water decreases.
A solution can be created by dissolving sugar in water. If the solution contains enough sugar, like in a sugar syrup, it will suck water molecules from the food cells, reducing the meal's water activity. Osmosis is the mechanism responsible for this.
Osmosis is thus a particular instance of diffusion, specifically the diffusion of water. Solution two in the illustration above gains water more quickly than it loses sugar. This is due to how quickly water molecules can move through the selectively permeable membrane compared to how slowly sugar molecules can.
To learn more about osmosis from the given link:
https://brainly.com/question/23035889
#SPJ4
a scuba diver is wearing a head lamp and looking up at the surface of the water. if the minimum angle to the vertical resulting in total internal reflection is 25 degrees, what is the index of refraction of the water? assume the index of refraction of air
The index of refraction of the water is equal to 2.37.
What is snell's law?Snell's law can be described as a formula used to describe the relationship between the angles of incidence and angle of refraction, when the light passes through a boundary between two different medium like water, air, or glass.
Snell's law states that the ratio of the sines of the angle of incidence and angle of refraction is equal to the refractive index of the second medium which is equal to the ratio of the refractive indices of the two media
[tex]{\displaystyle {\frac {\sin \theta _{1}}{\sin \theta _{2}}}=n_{21}={\frac {n_{2}}{n_{1}}}={\frac {v_{1}}{v_{2}}}}[/tex]
Given, the angle of incidence, i = 25°
The index of refraction of air, n₂ = 1.00
By using Snell's law, we can find the index of refraction of the water:
[tex]{\displaystyle {\frac {\sin i}{\sin 90}={\frac {1}{n_{1}}}[/tex]
[tex]{\displaystyle n_1 = {\frac {1}{\sin 25}[/tex]
n₁ = 2.37
Learn more about Snell's law, here:
https://brainly.com/question/2273464
#SPJ1
How can your neighborhood be improved?.
Trim any bushes or trees on your property that provide convenient hiding places too.
Prune where trees and bushes block your view of your front door or obscure your view out of your home's windows. Keep your porch visible and make sure your home looks like it has the neighborhood in mind. Keeping our neighborhoods clean is important because unclean neighborhoods attract germs and diseases.
Our neighbors get sick when they aren't. Also, it's better to live in a clean neighborhood than a dirty one. The home and neighborhood in which you grow up influence your health and longevity. A safe tidy stable and affordable home also affect a child's academic performance.
Learn more about Neighborhood here:-https://brainly.com/question/7566863
#SPJ4
consider the washington monument in washington, d.c. in the united states. what forces act between it and the earth and how do they compare?
The monument is attracted to Earth with a force equal to its weight, and Earth is attracted to the monument with an equal force. The situation can be represented with two force vectors of equal magnitude but pointing in opposite directions.
What is force ?An object with mass changes its velocity in response to a push or pull. Force is an external agent that has the power to alter a body's resting or moving state. It has a size and a movement.
Both contact and non-forces are different types of force. Examples of forces include gravitational force, nuclear force, frictional force, magnetic force, electrostatic force, spring force, and others.
Learn more about Force here:
https://brainly.com/question/12785175
#SPJ4
a 50 kg diver stands at the end of a 4.6 m diving board. where is the best place to put your rotational axis if you want to find the force on the pivot at point b?
The force on the pivot at point b is 1390 N. Considering that a force is a vector quantity, it has both a magnitude and a direction.
What is force ?A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity because it has both magnitude and direction.There is no net force exerted on an object and it is considered to be in equilibrium if the amount and direction of the forces acting on it are precisely balanced.A force that brings a body into mechanical balance is known as an equilibrant force. A body has zero acceleration when the vector sum of all applying forces equals zero, according to Newton's second law.Choose a rotation axis.
Στ = 0 (rotational equilibrium)
Στ = +(1.2m)⋅(F1) – (4.6m)⋅(50kg⋅9.8m/s²) = 0
F1 = 1880 N
ΣF = 0 (translational equilibrium)
ΣFy = F1 – F2 – mg
= 1880 N – F2 – (50kg⋅9.8m/s²) = 0
F2 = 1390 N
The force on the pivot is 1390 N
To learn more about force refer :
https://brainly.com/question/12970081
#SPJ4
consider an object on which a number of forces act for a short time. the kinetic energy of the object will have decreased if the net work done by the forces . which of the following correctly fills in the blank?
The kinetic energy of the object will have decreased if the net work done by the forces: Zero.
Kinetic energy is the strength an item has due to its motion. If we want to accelerate an item, then we have to practice a force. applying pressure calls for us to do paintings. After paintings have been finished, power has been transferred to the item, and the object may be shifting at a new constant pace.
Solution:-
a) Arm wore energy theorem,
WwW = AE
Sy if AKEDO, WO
Now, the correct option is: achn4 on the project is positive
Learn more about Kinetic energy here:
https://brainly.com/question/8101588
#SPJ4
the pressure in car tires is often measured in pounds per square inch ( lb/in.2 ), with the recommended pressure being in the range of 25 to 45 lb/in.2 . suppose a tire has a pressure of 39.5 lb/in.2 . convert 39.5 lb/in.2 to its equivalent in atmospheres.
The pressure will become 2.68 atm when expressed in atmospheres.
How do we convert from unit to another ?The act of shifting a quantity's measurement between two units of measurement is known as unit conversion. Usually, multiplicative conversion factors are used, which change the value of the measured amount without altering its effects.
The metric system typically requires moving a decimal point in order to translate from one unit to another.
The given data is 39.5 [tex]lb/in^2[/tex]
we have to convert it into atmospheres
The pressure is :
39.5 [tex]lb/in^2[/tex] × [tex]\frac{1 atm}{ 14.7 lb/in^2}[/tex]
because the conversion factor is 14.7 [tex]lb/in^2[/tex]
thus the given pressure becomes ;
Pressure = 2.68 atm
The pressure will become 2.68 atm when expressed in atmospheres.
To know more about conversions you may visit the link which is mentioned below;
https://brainly.com/question/21437879
#SPJ4
A crude approximation of voice production is to consider the breathing passages and mouth to be a resonating tube closed at one end. What is the fundamental frequency ????1 if the tube is 0.260 m long, by taking air temperature to be 37.0∘C?
What would this frequency become if the person's breathing passage were filled with hydrogen instead of air? Assume the same temperature dependence for hydrogen as for air.
The frequency becomes 1301.259 Hz when the person is breathing a passage filled with hydrogen instead of air.
Speed of sound in air at temperature Tc
v=331(√(1+(Tc/237)))
At temperature Tc= 37 degree celcius
vc= 352.72 m/sec
The fundamental frequency of the tube
f= v/4L
f=352.72/ 4*.26= 339.15 Hz
for hydrogen gas, the speed of sound at temperature Tc
v=1270 √(1+Tc/273)
v= 1353.305 m/sec
Fundamental frequency f= v/ (4*L)
f= 1353.30/4*0.26
f= 1301.259 Hz
Frequency is an expression of the way regularly a periodic waveform or signal repeats itself at a given amplitude. It can be expressed in hertz (Hz), kilohertz (kHz), megahertz (MHz), and many others.
The frequency feature calculates how often values occur inside a number value, after which returns a vertical array of numbers. For example, use frequency to matter the quantity of taking a look at rankings that fall inside degrees of rankings.
The four one-of-a-kind styles of frequency distributions are ungrouped frequency distributions, grouped frequency distributions, cumulative frequency distributions, and relative frequency distributions.
Learn more about frequency here:-https://brainly.com/question/254161
#SPJ4
question 1. transactions (6 points) let schedule s1 has t1, t2 and t3 are transactions t1 t2 t3 read(z) write(y) read(x) commit read(x) write(x) read(z) write(z) commit read(x) write(x) read(y) commit let schedule s2 has t1, t2 and t3 are transactions t1 t2 t3 read(z) write(y) read(x) commit read(x) write(x) read(z) write(z) commit read(x) write(x) read(y) commit 1.1) s1 is a conflict equivalent to s2 or not? and why? (3 points) 1.2) s1 is a view equivalent to s2 or not? and why? (3 points)
Vital Points The above schedule's precedence graph is T1T3T2 with Topological Sort applied. The sequential timetables T1, T3,
What does a graph of precedence display?Process synchronization is necessary. A directed acyclic graph called a "precedence graph" is used to display the stage of execution of different operating system processes. It has nodes and edges. The processes are represented by nodes, while the execution flow is represented by edges.
What does a sequence diagram in line balancing mean?An illustration of line balancing is seen in The Balancing Act. Stations are given tasks to do. Similar to a process flow diagram, a precedence diagram uses shapes and arrows to represent important and crucial steps throughout the assembly of the good or service.V
To know more about graph visit:
https://brainly.com/question/17267403
#SPJ4
complete the equations to show how the following compound can be synthesized from cyclopentanol.
Complete the equations to show how the following compound can be synthesized from cyclopentanol is cyclopentane.
A ring of five carbon atoms, each connected with two hydrogen atoms above and below the plane, makes up the extremely combustible alicyclic hydrocarbon cyclopentane, with the chemical formula C5H10 and CAS number 287-92-3. It manifests as an odorless, colorless liquid. There is no specific usage for cyclopentane. Cyclopentane itself isn't used in any commercial goods. It is a byproduct of several fuels and blowing agents as a volatile hydrocarbon. Although it is somewhat combustible, it might theoretically be utilized as a refrigerant. The polyurethane foams used to insulate freezers and refrigerators are blown with cyclopentane. Cyclopentane doesn't have any hydro-fluorocarbons in it, unlike certain other substances that are used to insulate refrigerators (HFCs). Equivalent CO2 emissions are significantly reduced as a result of using cyclopentane.
Learn more about Cyclopentane here:
https://brainly.com/question/622801
#SPJ4
