Help please it's urgent
Write a general formula to describe the following variation: F is directly proportional to the square of d, and F = 40 when d = 5.

40 = 5k

F = 8d

F = 1.6*d^2

F = kd

0.3 as a fraction would be 3/10

33.3 would be 333/10

To check it so 3 ÷ 10 and 333 ÷ 10

It will give you the decimal again.

You're welcome.

Answer: the answer is 33.3 is 33 3/10  and 0.3 is 3/10

Step-by-step explanation:

you welcome (ﾉ◕ヮ◕)ﾉ*:･ﾟ✧

The amount of money Jamar will make in his 18th year working at this job is = $107,500

A salary is a form of periodic payment from an employer to an employee, which may be specified in an employment contract. It is contrasted with piece wages, where each job, hour or other unit is paid separately, rather than on a periodic basis.

here, we have,

Calculation of yearly salary outcome

The amount of money Jamar made in his first year= $48,000

The salary rise per year = $3,500

The amount of money he will make for the extra 17 years is

= 17 × $3,500

= $59,500

Therefore the amount he will receive as his salary in the 18th year working at this job = $48,000 + $59,500

= $107,500

Learn more about salary outcome here:

brainly.com/question/24855677

#SPJ1

Answer:

x=10

Step-by-step explanation:

Answer:

x=10

Step-by-step explanation:

The ratio used to find the measurement of angle x is given as follows:

cos(x) = 40/68.

The three trigonometric ratios are defined as follows:

For angle x, we have that:

Hence the ratio is given as follows:

cos(x) = 40/68.

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

Answer:

x = 40.5

Step-by-step explanation:

SQ is an angle bisector and divides the opposite side into segments that are proportional to the other two sides, that is

[tex]\frac{PS}{RS}[/tex] = [tex]\frac{PQ}{RQ}[/tex] ( substitute values )

[tex]\frac{20}{18}[/tex] = [tex]\frac{45}{x}[/tex] ( cross- multiply )

20x = 18 × 45 = 810 ( divide both sides by 20 )

x = 40.5

No, if the figures on the left side of the area model were changed to 20, 10, and 5, the product would retain the same.

Area model multiplication is what?

The area model approach is based on the straightforward equation that may be used to calculate the area of a rectangle: LxW=A. As this anchor chart from Primary Punch illustrates, students typically begin by learning basic arrays for one-digit multiplication. When we multiply each digit of one number by each digit of another number while maintaining the place value of each digit, the resulting numbers are called partial products.

According to the supplied query,

30 and 5 on the left side of the area model are altered to 20,10, and 5 

Thus, after multiplying partial products, we obtain:

First row = 20×100+20×20+8×20

               = 2000+400+160 = 2560

Second row = 10×100+10×20+10×8

                     = 1000+200+80 = 1280

Third row = 5×100+5×20+5×8

                = 500+100+40 = 640

Adding all the rows we get,

2560+1280+640 = 4480

The item we receive when the dimensions are 30 and 5 is the same as this. In each instance, the area product stays the same.

To know more about area model multiplication visit:

https://brainly.com/question/13895622

#SPJ1

The area of the trapezoid KELP is approximately 2285.47 square units.

What is a trapezoid?

A polygon with only one set of parallel sides is called a trapezoid. The parallel bases of a trapezoid are another name for these parallel sides. Trapezoids have two additional sides that are not parallel and are referred to as their legs.

The formula to find the area of a trapezoid is -

A = (1/2) × h × (b1 + b2)

where -

A is the area of the trapezoid.

h is the height of the trapezoid.

b1 and b2 are the lengths of the parallel bases of the trapezoid.

Using the given values, we can substitute them into the formula and solve for the area -

A = (1/2) × h × (b1 + b2)

A = (1/2) × 52.6 × (47.8 + 39.1)

A = 2285.47

Therefore, the area value is 2285.47 square units.

To learn more about trapezoid from the given link

https://brainly.com/question/1410008

#SPJ1

The probability of a person dying of renal failure if neither of their parents had renal failure is 0.056 or about 5.6%.

To solve this problem, we can use Bayes' theorem, which states that:

P(A|B) = P(B|A) * P(A) / P(B)

where P(A|B) is the probability of event A given that event B has occurred, P(B|A) is the probability of event B given that event A has occurred, P(A) is the prior probability of event A, and P(B) is the prior probability of event B.

In this case, we want to find the probability of a person dying of renal failure given that neither of their parents had renal failure. Let's define the following events:

R: death due to renal failure

P: at least one parent with renal failure

NP: neither parent has renal failure

We are given the following information:

Total deaths = 1000

Deaths due to renal failure (R) = 321

People with at least one parent with renal failure (P) = 460

Deaths due to renal failure among people with at least one parent with renal failure = 115

Using this information, we can calculate the probabilities as follows:

P(R) = 321/1000

P(P) = 460/1000

P(R|P) = 115/460

To find the probability of a person dying of renal failure given that neither of their parents had renal failure (i.e., P(R|NP)), we need to use Bayes' theorem. We can start by finding the probability of neither parent having renal failure (i.e., P(NP)):

P(NP) = 1 - P(P) = 1 - 0.46 = 0.54

Next, we can use the law of total probability to find the probability of dying of renal failure among people with neither parent having renal failure:

P(R|NP) = P(R) * P(NP|R) / P(NP)

We can find P(NP|R) using the formula:

P(NP|R) = P(NP ∩ R) / P(R)

To find P(NP ∩ R), we can use the formula:

P(NP ∩ R) = P(R|NP) * P(NP)

Substituting the values, we get:

P(R|NP) = P(R) * P(NP|R) / P(NP)

= 321/1000 * (1 - 115/460) / 0.54

= 0.056

This calculation shows how conditional probabilities can be calculated using Bayes' theorem and the law of total probability.

To learn more about probability click on,

https://brainly.com/question/15018599

#SPJ4

Answer:

no answer

soory

Step-by-step explanation:

It will take approximately 12.96 minutes for the oven to reach a temperature of at least 375 degrees.

What is Approximation?
Approximation is the act of estimating or finding a value that is close to the true or exact value, but not necessarily identical to it. In other words, an approximation is a rough calculation or an educated guess that is used when the exact value is not known or is too difficult to calculate. Approximations are commonly used in mathematics, science, engineering, and many other fields where exact values are often difficult to obtain or not required. The level of accuracy of an approximation depends on the method used and the degree of precision needed for the particular situation.

Let's use the information given to find the rate of temperature increase per minute.

Between the first two data points, the temperature increased by 3 degrees in 1 minute. Between the next two data points, the temperature increased by (112.5 - 3) = 109.5 degrees in (5 - 1) = 4 minutes. So the rate of temperature increase is (109.5/4) = 27.375 degrees per minute.

To find out how long it will take the oven to reach 375 degrees, we can use the formula:

time = (final temperature - initial temperature) / rate of temperature increase

In this case, the initial temperature is 3 degrees and the final temperature is 375 degrees. Substituting these values and the rate of temperature increase we calculated earlier, we get:

time = (375 - 3) / 27.375 = 12.96 minutes (rounded to two decimal places)

So it will take approximately 12.96 minutes for the oven to reach a temperature of at least 375 degrees.

Learn more about temperature  click here:

https://brainly.com/question/26141817

#SPJ1

Answer:

Part A: If (26)x = 1, the value of x is approximately 0.03846.

Part B: If (50)x = 1, the possible value of x is approximately 0.02.

Step-by-step explanation:

Part A: To find the value of x in the equation (26)x = 1, we need to find the value that, when raised to the power of 26, will equal 1. This value can be found by taking the reciprocal (or multiplicative inverse) of 26 and taking the natural logarithm of both sides.

Using the formula x = 1/26, we get:

x = 1/26 = 0.03846

So, the value of x in the equation (26)x = 1 is approximately 0.03846.

Part B: To find the possible values of x in the equation (50)x = 1, we need to find the values that, when raised to the power of 50, will equal 1. This value can be found by taking the reciprocal (or multiplicative inverse) of 50 and taking the natural logarithm of both sides.

Using the formula x = 1/50, we get:

x = 1/50 = 0.02

So, the possible value of x in the equation (50)x = 1 is approximately 0.02.

The total number of new cars made by a factory from 1,254 tires as each car required four tires is equal to 314 ( round off to nearest whole number ).

Total number of tires in the factory is equal to 1,254

Number of tires required by each new car is equal to 4 tires.

The total number of new car made by a factory is equal to :

4 tires = 1 new car

⇒ 1 tire = ( 1 / 4 ) new car

⇒ 1,254 tires = 1,254 ×  ( 1 / 4 ) new car

⇒ 1,254 tires = ( 1,254 / 4 ) new cars

⇒ 1,254 tires =  313.5 new cars

But number of new cars cannot be in the decimals or fraction.

Round off to the nearest whole number .

⇒ 1,254 tires =  314 new cars ( nearest whole number )

Therefore the total number of new cars made by a factory is equal to 314 new cars.

Learn more about cars here

brainly.com/question/11733094

#SPJ4

Answer:

B. x=3

Step-by-step explanation:

3x+4y=12

9x-4y=24

Add 9x and 3x

Subtract -4y from 4y which will cancel out

Add 12 and 24

12x=36

divide both sides by 12

x=3

Answer:

Equation of perpendicular line:

[tex]\boxed{\quad y=-\dfrac{1}{2}x+\dfrac{7}{2}\quad }[/tex]

Step-by-step explanation:

Generalized lope-intercept form of a line is y = mx + b    [1]

where

m = slope

b = y-intercept

Equation of the given line is y = 2x - 1           [2]

We are asked to find the equation of the line perpendicular to this and also passes through (1, 3)

The given proof follows the symmetric property of angle congruence. Therefore, option C is the correct answer.

Triangle congruence theorem or triangle congruence criteria help in proving if a triangle is congruent or not. The word congruent means exactly equal in shape and size no matter if we turn it, flip it or rotate it.

Given that,

       Statements            Reasons

1. ∠ABC≅∠DEF           1. Given

2. m∠ABC=m∠DEF     2. Definition of congruent angles

3. m∠DEF=m∠ABC     3. Symmetric property of equality

4. ∠DEF≅∠ABC          4. Definition of congruent angles

The symmetric property says that if one geometric shape is congruent to another, than the second shape is also congruent to the first. The symmetric property of congruence says that for any angles A and B, if ∠A≅∠B then ∠B≅∠A.

Therefore, option C is the correct answer.

To learn more about the congruent theorem visit:

https://brainly.com/question/24033497.

#SPJ9

The ordered pairs that are solution to the system are (15, -1) (0,4) (10, 30) (5, 5) (1, 10)​

From the question, we have the following parameters that can be used in our computation:

2x + 3y>10

y≥ -3x + 2

Represent properly

2x + 3y > 10

y ≥ -3x + 2

Next, we make a plot of the system to determine the solution

The shaded area in the plot represent the solution to the inequality

In this case, the coordinates in the shaded area are

(15, -1) (0,4) (10, 30) (5, 5) (1, 10)​

None of the options represent the shaded area (see attachment)

Read more about inequality at

brainly.com/question/25275758

#SPJ1

Understand the strengths and weaknesses of the tools, eliminate the outliers, critically analyze the correlations, and look at the context are all methods that help to consider any limitations of the data.

When preparing for a question-and-answer session after a presentation, it is important to consider any limitations of the data used. To do this, it is important to understand the strengths and weaknesses of the tools used to collect and analyze the data. Eliminating outliers from the data can help to ensure accuracy, as outliers can skew the results. It is also important to critically analyze any correlations that may be present in the data, as these could be indicative of a limitation in the data. Additionally, looking at the wider context of the data can help to identify any potential limitations, as certain factors may not have been taken into account when collecting the data. All of these methods can help to ensure accuracy and validity of the data used in the presentation.

Learn more about correlation here

https://brainly.com/question/28898177

#SPJ4

The function operation (f-g)(x) in the functions f(x) = 2√3x and g(x) = -4√3x is 6√3x and  the value of (f-g)(12) is 36.

A function is simply a relationship that maps one input to one output.

Given that;

First, set up the function;

(f - g)(x) = f(x) - g(x)

Replace the function designators with the actual function.

(f - g)(x) = f(x) - g(x)

(f - g)(x) = 2√3x - (-4√3x)

(f - g)(x) = 2√3x + 4√3x

(f - g)(x) = 6√3x

Now, we evaluate when x = 12.

(f - g)(x) = 6√3x

Replace x with 12

(f - g)( 12 ) = 6√3(12)

(f - g)( 12 ) = 6√36

(f - g)( 12 ) = 6 × 6

(f - g)( 12 ) = 36

Therefore, the function operation (f-g)(x) is 6√3x and (f-g)(12) is 36.

Learn more about functions here: brainly.com/question/2541698

#SPJ1

4214.7 is the balance in the account after 2 months .

What does compound and simple interest mean?

A fixed proportion of the principal amount borrowed or lent is what is known as simple interest and is paid or received over a given period of time.

                                Borrowers are required to pay interest on interest in addition to principal because compound interest accrues and is added to the total amount of interest from earlier periods.

P = $4200

R = 2.1% = 2.1/100 = 0.021  =

     T = 2 month = 2/12 = 1/6

    I = PRT

     = 4200 * 0.021 * 1/6 = 14.7

 Amount = P + I = 4200 + 14.7  = 4214.7

Learn more about Simple interest

brainly.com/question/25845758

#SPJ1

The length of segment AC is equal to 9.

Since B is between A and C, we can use the fact that AB + BC = AC. Similarly, since C is between B and D, we can use the fact to state the lengths of the following segments that: CD + BC = BD.

Substituting the given values, we get:

AB + BC = AC

CD + BC = BD

We are given segments BD = 7 and BC = 3, so we can substitute these values:

CD + 3 = 7

Solving for CD, we get:

CD = 7 - 3

CD = 4

Now we can use the fact that AD = AC + CD to solve for the length of segment AC:

AD = AC + CD

13 = AC + 4

AC = 9

Learn more about the length of segments on:

https://brainly.com/question/28322552

#SPJ1

The orthocenter of ▲ABC is the point (27/4, 17/4)

What is Orthocenter in coordinate geometry?

Any triangle's three altitudes are contemporaneous line segments (they intersect in a single point), and this point is known as the triangle's orthocenter.

To find the orthocenter of ▲ABC, we need to first find the altitude lines of the triangle, which are the perpendicular lines from each vertex to the opposite side. The point where these three lines intersect is the orthocenter.

The slope of this line is:

BC = (-1 - (-4)) / (-1 - 5)

BC = 3/2

Using point-slope form, the equation of the line BC is:

[tex]y -y_{b} = m_{BC} (x - x_{b} )[/tex]

y - (-4) = (3/2)(x - 5)

y = (3/2)x - 17/2

To find the altitude from vertex A to BC, we need to find the equation of the line passing through A and perpendicular to BC. The slope of this line is the negative reciprocal of the slope of BC:

[tex]m\ altitude_A = -2/3[/tex]

The point-slope form of the equation of the altitude from A is:

[tex]y -y_{A} = m_{BC} (x - x_{A} )[/tex]

y - 5 = (-2/3)(x - 5)

y = (-2/3)x + 25/3

Similarly, we can find the equations of the altitudes from vertices B and C to the opposite sides AC and AB, respectively:

Altitude from B to AC:

[tex]m_{AC} = \frac{(y_{C} -y_{A})}{(x_{C} -x_{A})} \\\\m_{AC} = \frac{-3}{2}[/tex]

AC = 2/3

y - (-4) = (2/3)(x - 5)

y = (2/3)x - 2/3

Altitude from C to AB:

[tex]m_{AB} =\frac{(y_{B}- y_{A})}{(x_{B}- x_{A})} \\[/tex]

= (-4 - 5) / (5 - 5)

= undefined

x = -1

Now, we need to find the point of intersection of these three altitudes, which is the orthocenter. To do this, we can solve the system of equations formed by the three altitude lines:

y = (3/2)x - 17/2

y = (-2/3)x + 25/3

y = (2/3)x - 2/3

Substituting the third equation into the first two equations, we get:

(2/3)x - 2/3 = (-2/3)x + 25/3

(4/3)x = 9

x = 27/4

Substituting x = 27/4 into any of the three equations, we get:

y = (2/3)(27/4) - 2/3 = 17/4

Therefore, the orthocenter of ▲ABC is the point (27/4, 17/4).

To know more about coordinates of the orthocenter visit,

https://brainly.com/question/6944944

#SPJ1

The missing length of the triangle is the hypotenuse which is given by 12.08

Pythagorean theorem states that the sum of the square of the opposite and adjacent sides of a triangle is equal to the square of the hypotenuse.

a² + b² = c²

c = √a² + b²

a = 11

b = 5

c = √a² + b²

= √11² + 5²

= √121 + 25

= √146

c = 12.08304597359

Approximately,

c = 12.08

Consequently, the hypotenuse of the triangle is approximately 12.08

Read more on Pythagorean theorem:

https://brainly.com/question/231802

#SPJ1

The standard deviation is used more frequently then the variance because  standard deviation is more stable and less sensitive to outliers.

The Standard Deviation and Variance are defined as two closely related measures of the spread or dispersion of a set of data.

The Variance is defined as average of squared differences from mean, while Standard Deviation is square root of variance.

The reason why the standard deviation is used more frequently than  variance is because the standard deviation is expressed in same units as the original data, whereas  the variance is expressed in squared units.

For Example, if we measure  heights of a group of people in inches, the standard deviation will be expressed in inches, whereas variance will be expressed in square inches.

Learn more about Variance  here

https://brainly.com/question/29758680

#SPJ4

a. 1 hour and 45 minutes for the bacteria population to double.

To find out how long it takes for the bacteria population to double, we need to solve the equation:

2p(0) = p(h)

where p(0) is the initial population and h is the time it takes for the population to double.

Since p(h) = [tex]1000e^{(0.4h)}[/tex], we can write:

2p(0) = [tex]1000e^{(0.4h)}[/tex]

Dividing both sides by 1000, we get:

2p(0)/1000 = [tex]e^{(0.4h)}[/tex]

Taking the natural logarithm of both sides, we get:

ln(2p(0)/1000) = 0.4h

Solving for h, we get:

h = ln(2p(0)/1000) / 0.4

We know that p(0) = 1, since the initial population is given as 1,000. Substituting this value, we get:

h = ln(2) / 0.4

h ≈ 1.73

So it takes approximately 1.73 hours for the bacteria population to double.

Rounding to the nearest quarter of an hour.

we get:

h ≈ 1.75 hours

h ≈ 1 hour and 45 minutes

For similar question logarithm,

https://brainly.com/question/25993029

#SPJ4

The length of the original piece of fabric, given the proportion cut by Yu Yan and the amount cut in total, is 75 .75 inches

Assume that the original length of fabric was denoted as x, this means that the first cutting by Yu Yan took out :

= 1 / 3 x

The equation would then be :

x - 1 / 3 x - 10 - 5 = 35 + 1 / 2

x - 1 / 3 x - 10 - 5 = 35 . 5

The length of the original fabric is:

2 / 3x  = 35. 5 + 10 + 5

x = 50. 5 ÷ 2 / 3

x = 50. 5 x 3 / 2

x = 75 .75 inches

Find out more on fabrics at https://brainly.com/question/13705312

#SPJ1

Answer:

4x * -16

Step-by-step explanation:

You use the distributive property and multiply 4 by everything in the parentheses. The 16 is negative because you keep the minus sign with the number behind it.

Answer:

give the diagram please

The slope of the line through each pair of points (11, 8), (- 13, 11) is -1/8.

The slope of a line is defined as the change in y- coordinate with respect to x - coordinate. The slope of a line represents the direction and steepness of a line. The formula for the slope of a line that passes through the points (x₁, y₁) and (x₂, y₂) is given by

Here we have

The pair of points (11, 8), (- 13, 11)  

By the given formula,

Slope (m) = [ y₂ - y₁]/ [x₂ - x₁]

The slope from (11, 8) to (- 13, 11) can be calculated as follows

Slope = [ 11 - 8 ]/ [ -13 -11 ] = 3/-24 = -1/8

Therefore,

The slope of the line through each pair of points (11, 8), (- 13, 11) is -1/8.    

Learn more about Slope of line at

https://brainly.com/question/25194899

#SPJ1

The area of the composite figure is equal to 99 mm² square milimetresmetres.

The composite figure can be observed to be made up of two horizontal rectangle, and a vertical rectangle, so we shall calculate for the areas of the three figures and then add the result to get the total area of the composite figure as follows:

area of the bigger horizontal rectangle = 11 mm × 3 mm

area of the bigger horizontal rectangle = 33 mm²

area of the smaller horizontal rectangle = 5 mm × 2 mm

area of the smaller horizontal rectangle = 10 mm

area of the vertical rectangle = 14 mm × 4 mm

area of the vertical rectangle = 56 mm²

total area of the composite figure = 33 mm² + 10 mm² + 56 mm²

total area of the composite figure = 99 mm²

Therefore, the area of the composite figure is equal to 99 mm² square milimetres.

Know more about area here:https://brainly.com/question/21135654

#SPJ1