We know that Calcium hydroxide reacts with Phosphoric acid to form Calcium Phosphate and Water. The answer is 0.57 g.
Ca(OH)₂ + H₃PO₄ → Ca₃(PO₄)₂ + 2 H₂OMolar mass of Ca₃(PO₄)₂= (3×40.1)+(2×30.97)+(8×16)= 310.19 g/molMolar mass of Ca(OH)₂= 74 g/molThus, the number of moles of Ca₃(PO₄)₂ is= 2.39/310.19 = 0.0077171Number of moles of Ca(OH)₂ required = Number of moles of Ca₃(PO₄)₂= 0.0077171.
Now, number of moles of Ca(OH)₂= mass of Ca(OH)₂/molar mass of Ca(OH)₂=> mass of Ca(OH)₂= number of moles of Ca(OH)₂×molar mass of Ca(OH)₂= 0.0077171×74= 0.5702986 g= 0.57 gThus, 0.57 g of Ca(OH)₂ reacts with 2.39 g of Ca₃(PO₄)₂.
To know more about Phosphoric acid visit:-
https://brainly.com/question/29344496
#SPJ11
a 15.0 ml solution of ba(oh)₂ is neutralized with 22.7 ml of 0.200 m hcl. what is the concentration of the original ba(oh)₂ solution?
The concentration of the original Ba(OH)₂ solution if 15.0 ml solution of Ba(OH)₂ is neutralized with 22.7 ml of 0.200 m HCl is 151.3 mol/dm³
To determine concentration of the original Ba(OH)₂ solution, we must know he balanced chemical equation for the neutralization reaction is:
Ba(OH)₂ + 2HCl → BaCl₂ + 2H₂O
From the equation above, the stoichiometric ratio of Ba(OH)₂ and HCl is 1:2. That means one mole of Ba(OH)₂ reacts with 2 moles of HCl. The balanced chemical equation also shows that the number of moles of HCl used is the same as the number of moles of Ba(OH)₂. Hence:
moles of HCl = 0.200 mol/dm³ × 22.7 dm³ = 4.54 mol
Using the stoichiometric ratio, the moles of Ba(OH)₂ in the solution can be calculated to be:
moles of Ba(OH)₂ = 4.54 mol ÷ 2 = 2.27 mol
The volume of the Ba(OH)₂ solution is 15.0 mL, which is 0.015 dm³. Therefore, the concentration of the original Ba(OH)₂ solution can be calculated as:
concentration = moles/volume= 2.27 mol ÷ 0.015 dm³= 151.3 mol/dm³
Learn more about concentration: https://brainly.com/question/9537498
#SPJ11
The concentration of the original Ba(OH)₂ solution is 0.302 M.
Given data
Volume of Ba(OH)₂ solution used = 15.0 ml
Volume of HCl used = 22.7 ml
Molarity of HCl solution used = 0.200 M
We need to calculate the concentration of Ba(OH)₂ solution, which is not known.Molar ratio of HCl and Ba(OH)₂ in a balanced chemical equation of their neutralization is;
HCl + Ba(OH)₂ → BaCl₂ + 2H₂O
The balanced chemical equation tells us that 1 mole of HCl is required to neutralize 1 mole of Ba(OH)₂.
So, the moles of HCl used in the reaction is;
moles of HCl = molarity × volume (in liters)
moles of HCl = 0.200 M × 0.0227 L = 0.00454 mole
Since one mole of HCl reacts with 1 mole of Ba(OH)₂,
so the number of moles of Ba(OH)₂ used is also equal to 0.00454 mole. Since we know the volume of the Ba(OH)₂ solution used, we can calculate the molarity of the solution as;
molarity = moles of solute / volume of solution in liters
Molarity = 0.00454 / (15.0 / 1000) = 0.302 M
Therefore, the concentration of the original Ba(OH)₂ solution is 0.302 M.
To know more about concentration visit:
https://brainly.com/question/3045247
#SPJ11
Which electron subshell is being filled for the actinide series of elements on the periodic table? 3p 6d 4f 5f 4s
The electron subshell being filled for the actinide series of elements on the periodic table is the 5f subshell. The Actinide series elements are a group of metallic elements located in Group 3 of the periodic table, which is below the transition metals.
In the periodic table, the Actinide series is the row below the Lanthanide series. The electron configuration for the Actinide series of elements can be predicted by the atomic number, with each atomic number adding another electron to the subshell. The Actinide series subshells are the 5f, 6d, 7s, and 7p subshells. Each Actinide element has its unique electron configuration and characteristic physical and chemical properties.
Actinide series elements are radioactive and unstable, making them challenging to isolate. Actinium (Ac), thorium (Th), protactinium (Pa), uranium (U), neptunium (Np), plutonium (Pu), americium (Am), curium (Cm), berkelium (Bk), californium (Cf), einsteinium (Es), fermium (Fm), mendelevium (Md), nobelium (No), and lawrencium (Lr) are all members of the Actinide series.
To know more about elements visit:-
https://brainly.com/question/30858299
#SPJ11
How many molecules of XeF6 are formed from 12.9 L of F2(at 298 K and 2.60 atm) according to the following reaction?
Assume that there is excess Xe.
Xe(g) + 3 F2(g) → XeF6(g)
Approximately 6.40 × 10^23 molecules of XeF₆ are formed from 12.9 L of F₂.
To determine the number of molecules of XeF₆ formed from 12.9 L of F₂, we need to use the ideal gas law to calculate the number of moles of F₂, and then use the stoichiometry of the reaction to find the number of moles of XeF₆.
First, let's calculate the number of moles of F₂ using the ideal gas law equation:
PV = nRT
Where:
P = pressure of F₂ (2.60 atm)
V = volume of F₂ (12.9 L)
n = number of moles of F₂ (to be calculated)
R = ideal gas constant (0.0821 L·atm/mol·K)
T = temperature in Kelvin (298 K)
Rearranging the equation to solve for n:
n = PV / RT
n = (2.60 atm) * (12.9 L) / (0.0821 L·atm/mol·K * 298 K)
n ≈ 1.063 mol
According to the balanced equation, 1 mole of Xe reacts with 3 moles of F₂ to form 1 mole of XeF₆. Therefore, the number of moles of XeF₆ formed will be the same as the number of moles of F₂, which is approximately 1.063 mol.
Finally, we can convert the number of moles of XeF₆ to molecules by multiplying by Avogadro's number, which is 6.022 × 10^23 molecules/mol:
Number of molecules of XeF₆ = (1.063 mol) * (6.022 × 10^23 molecules/mol)
Number of molecules of XeF₆ ≈ 6.40 × 10^23 molecules
Learn more about XeF₆ at https://brainly.com/question/27111532
#SPJ11
which of the following can be reduced by sodium borohydride? group of answer choices nitrile ketone alkene ester aldehyde carboxylic acid
The functional groups that can be reduced by sodium borohydride include aldehydes, ketones, and esters.
Sodium borohydride (NaBH4) is a common reducing agent in organic chemistry, meaning it is often used to reduce various functional groups. Among the given choices, the functional groups that can be reduced by sodium borohydride include aldehyde, ketone, and ester.
Nitrile, alkene, and carboxylic acid are not typically reduced by NaBH4. Nitriles are typically reduced using other reagents such as lithium aluminum hydride (LiAlH4). Alkenes are typically hydrogenated using catalysts such as palladium on carbon (Pd/C). Carboxylic acids are typically reduced using more powerful reducing agents such as lithium aluminum hydride (LiAlH4) or borane (BH3).
When NaBH4 is used as a reducing agent, it donates a hydride ion (H-) to the functional group being reduced, leading to the formation of a new, reduced product. For example, when NaBH4 is added to an aldehyde, it donates a hydride ion to the carbonyl carbon, leading to the formation of a new alcohol. The reaction can be represented as follows:
RC=O + NaBH4 + H2O → RCH2OH + NaBO2 + H2
Overall, NaBH4 is a versatile reducing agent that can be used to reduce a variety of functional groups.
To know more about Alkenes visit:
https://brainly.com/question/29283735
#SPJ11
What is the molarity of a solution containing 0.325 moles of solute in 250 mL of solution? a) 1.30×10 −3
M b) 1.30M c) 0.769M d) 8.13×10 −2
M e) 769M molarty? moles pel lites
A solution containing 0.325 moles of solute in 250 mL of solution has a molarity of 1.30M.Explanation:Molarity can be defined as the amount of solute in moles dissolved per liter of solution.
In order to calculate molarity, the number of moles of solute and the volume of the solution in liters are required.Molarity formula is given as:Molarity = (number of moles of solute) / (volume of solution in liters)
Given that,The number of moles of solute = 0.325 molThe volume of the solution in milliliters = 250 mLConverting milliliters into liters, we get 0.250 LTherefore, the molarity can be calculated as:Molarity = (0.325 mol) / (0.250 L)= 1.30MTherefore, the answer is option b) 1.30M.
To know more about moles visit:
https://brainly.com/question/15209553
#SPJ11
For a methane molecule a) find the irreducible representations using the four C-H bonds as the basis (b) What orbitals on the central C atom will be used to form the sigma bonds in CH4? (c) Could d orbitals on the C atom play a role in orbital formation in CH4? Explain why or why not. (d) In SiH4, could d orbitals be used to form the sigma bonds? If so, which d orbitals?
The sp³ hybrid orbitals are involved in the formation of sigma bonds with the hydrogen atoms. The four sp³ hybrid orbitals of carbon are involved in forming the bonds with hydrogen.
As per the character table, the reducible representation, Γ(CH4), is given asΓ(CH4) = a1 + t2
Consider the basis functions as four C-H bonds. The number of such functions is four.
Let’s denote each basis function by CHi where i = 1, 2, 3, 4. The basis functions can be written as
CH1 = (1 2 3 4)CH2 = (1423)CH3 = (1342)CH4 = (1243)
Now we can obtain the irreducible representations by using character tables. The character tables for the four C-H bonds, based on the symmetry operations, are given as,
As we have four basis functions and each basis function transforms according to the A1 representation, we have,
A1 ⊗ A1 ⊗ A1 ⊗ A1 = A1 + T1 + T2 + E
To know more about hybrid orbitals visit:-
https://brainly.com/question/30506016
#SPJ11
a molecular compound has the empirical formula xy3. which of the following is a possible molecular formula? question 2 options: x2y3 xy4 x2y5 x2y6
If a molecular compound has the empirical formula xy3, the molecular formula could be xy6 or x2y6. Answer: d) x2y6
The empirical formula of a molecular compound has a lower ratio of atoms than the molecular formula. The molecular formula has the actual number of atoms of each element in one molecule of the compound. The difference between molecular formula and empirical formula is that the molecular formula is the actual formula of the molecule, whereas the empirical formula is the simplified version of the molecular formula.
If the empirical formula is xy3, the molecular formula could be xy6 or x2y6. Answer: d) x2y6. That means that in the simplest form, the ratio of x to y is 1:3. A possible molecular formula can be figured out using the molecular weight of each element in the compound. Suppose we use x as one molecular weight unit and y as another molecular weight unit. So we can say that the empirical formula for the compound is (x)(y3), which can be simplified to XY3. So, the molecular formula for the compound must be X2Y6 because the ratio of atoms between the two elements should remain 1:3. So, this ratio can only be achieved by multiplying the molecular formula by 2 (1x2) and 2 (3x2) times, resulting in X2Y6.
Learn more problems on empirical formula at https://brainly.com/question/1603500
#SPJ11
if 30.0 ml of 0.75 m hcl solution is needed to neutrtalize a solution of ca(oh)2, how many grams aof ca(oh)2 must bne in the solution
The balanced chemical equation for the reaction between HCl and Ca(OH)2 is:Ca(OH)2 + 2HCl → CaCl2 + 2H2OHow many moles of HCl are present in 30.0 mL of 0.75 M HCl solution?
First, we have to convert 30.0 mL to L as follows:30.0 mL × (1 L / 1000 mL) = 0.0300 LThen, we can calculate the number of moles of HCl present as follows:Number of moles of HCl = Molarity × Volume in LNumber of moles of HCl = 0.75 M × 0.0300 L = 0.0225 molFrom the balanced chemical equation, we can see that one mole of Ca(OH)2 reacts with two moles of HCl. Therefore, the number of moles of Ca(OH)2 present in the solution can be calculated as follows:Number of moles of Ca(OH)2 = 0.0225 mol ÷ 2 = 0.01125 molFinally, we can calculate the mass of Ca(OH)2 present in the solution using the molar mass of Ca(OH)2 as follows:Mass of Ca(OH)2 = Number of moles of Ca(OH)2 × Molar mass of Ca(OH)2Mass of Ca(OH)2 = 0.01125 mol × 74.09 g/mol = 0.834 gTherefore, 0.834 g of Ca(OH)2 must be present in the solution. The answer is 0.834 grams.
For more information on Molarity visit:
brainly.com/question/31545539
#SPJ11
when adjusted for any changes in δh and δs with temperature, the standard free energy change δg∘t at 600 k is equal to 1.4×105j/mol . calculate the equilibrium constant at 600 k
The equilibrium constant at 600 K, calculated using the given standard free energy change, is approximately 1.07 × 10^(-13).
To calculate the equilibrium constant (K) at 600 K using the given standard free energy change (ΔG°), we can use the equation:
ΔG° = -RT ln(K)
Where:
ΔG° is the standard free energy change
R is the gas constant (8.314 J/(mol·K))
T is the temperature in Kelvin
K is the equilibrium constant
We can rearrange the equation to solve for K:
K = e^(-ΔG° / RT)
Let's substitute the values into the equation:
ΔG° = 1.4 × 10^5 J/mol
R = 8.314 J/(mol·K)
T = 600 K
K = e^(-1.4 × 10^5 J/mol / (8.314 J/(mol·K) × 600 K))
Calculating this expression:
K ≈ e^(-29.146)
Using a scientific calculator or software, we find:
K ≈ 1.07 × 10^(-13)
Therefore, the equilibrium constant at 600 K is approximately 1.07 × 10^(-13).
The equilibrium constant (K) relates to the standard free energy change (ΔG°) through the equation ΔG° = -RT ln(K), where R is the gas constant and T is the temperature in Kelvin.
By rearranging the equation and plugging in the given values, we can solve for K. The resulting value gives us the equilibrium constant at 600 K.
To read more about equilibrium constant, visit:
https://brainly.com/question/3159758
#SPJ11
10.0 grams of argon and 20.0 grams of neon are placed in a 1200.0 ml container at 25.0 C The partial pressure of neon is atm. A) 0.700 B) 8.70 C) 20.4 D) 3.40 E) 5.60 9) Consider the following reaction at equilibrium: 2002 (g) ? 2CO (g) + O2 (g) ?1°=-514k) Le Chatelier's principle predicts that adding O2 (g) to the reaction container will A) increase the partial pressure of CO (g) at equilibrium B) decrease the partial pressure of CO2 (9) at equilibrium C) increase the partial pressure of CO2 (g) at equilibrium D) decrease the value of the equilibrium constant E) increase the value of the equilibrium constant 0) The purpose of the salt bridge in an electrochemical cell is to A) provide a source of ions to react at the anode and cathode. B) provide oxygen to facilitate oxidation at the anode. C) provide a means for electrons to travel from the anode to the cathode. D) maintain electrical neutrality in the half-cells via migration of ions. E) provide a means for electrons to travel from the cathode to the anode.
D). The total pressure of the gas mixture is given as 1.04 atm. The amount of neon and argon is given as 20.0 g and 10.0 g respectively. We can use the formula;PAr = XAr × PTandPN= XN × PTWhere,PAr = partial pressure of argonXAr = mole fraction of argonPN= partial pressure of neonXN= mole fraction of neonPT= total pressure of the mixture.
Since we have to calculate the partial pressure of neon, we have to find the mole fraction of neon first.The mole fraction of neon (XN) can be calculated as:XN= number of moles of neon/total number of molesNumber of moles of neon can be calculated as:20.0gNe= molar mass of neon = 20.18 g/mol= 0.991 moles of neonNumber of moles of argon can be calculated as:10.0gAr= molar mass of argon = 39.95 g/mol= 0.250 moles of argonTotal number of moles in the mixture = 0.991 + 0.250= 1.241 moles of the mixtureMole fraction of neon = 0.991/1.241= 0.798The mole fraction of argon can be calculated as:XAr= 1 - XN= 1 - 0.798= 0.202Partial pressure of neon can be calculated as:PN= XN × PT= 0.798 × 1.04= 0.830 atmTherefore, the partial pressure of neon is 0.830 atm.
The balanced chemical reaction is given as:2CO(g) + O2(g) ⇌ 2CO2(g) The equilibrium constant (K) can be written as:K= [CO2]2/([CO]2[O2])If we add more oxygen to the reaction container, according to Le Chatelier's principle, the system will shift in the direction to reduce the excess of the added component. Thus, the concentration of O2 will decrease, and the concentration of CO and CO2 will increase, in order to maintain the equilibrium.The partial pressure of CO2 will increase, and the partial pressure of CO will also increase. However, the partial pressure of O2 will decrease. Thus, option (C) is the correct answer.Question 3The purpose of the salt bridge in an electrochemical cell is to maintain electrical neutrality in the half-cells via migration of ions. The salt bridge consists of an inverted U-tube containing an electrolyte, which allows the flow of ions between the half-cells. It completes the electrical circuit and balances the charges produced in the anode and cathode half-cells.
To know more about pressure visit:-
https://brainly.com/question/30673967
#SPJ11
the passage describes some glycolysis reactions. select the appropriate term for each blank to complete the passage.
The glycolysis reaction is the process of the breakdown of glucose by enzymes. In this process, glucose is broken down into pyruvate, which results in the release of energy in the form of ATP (Adenosine Triphosphate) molecules. The process of glycolysis involves ten different enzymes, each of which catalyzes a specific step in the reaction.
Glycolysis reactions occur in the cytoplasm of cells. The reaction is a sequence of ten steps, with the first five being an energy-consuming process while the second five steps are energy-generating. During the first five steps, two molecules of ATP are consumed, while during the second five steps, four molecules of ATP are generated along with two molecules of NADH (Nicotinamide Adenine Dinucleotide).
The glycolysis reaction results in a net gain of two ATP molecules. The overall reaction can be represented as follows: Glucose + 2NAD+ + 2ADP + 2Pi → 2 pyruvate + 2NADH + 2ATP + 2H2O + 2H+.
The glycolysis reaction occurs in almost all living organisms and is the first step in both aerobic and anaerobic respiration.
Glycolysis is a complex process consisting of a series of ten reactions that occur in the cytoplasm of cells. The first five reactions are energy-consuming while the second five reactions are energy-generating. In the first five reactions, two ATP molecules are used up, while in the second five reactions, four ATP molecules are produced.
The reaction sequence results in the breakdown of glucose into pyruvate, with the release of energy in the form of ATP. This is why the process of glycolysis is considered to be a form of energy metabolism. Glycolysis is a vital process that occurs in almost all living organisms. It is the first step in both aerobic and anaerobic respiration.
The overall reaction can be represented as Glucose + 2NAD+ + 2ADP + 2Pi → 2 pyruvate + 2NADH + 2ATP + 2H2O + 2H+. Thus, it can be concluded that the process of glycolysis plays an important role in the energy metabolism of cells.
To know more about glycolysis reaction visit:
https://brainly.com/question/2107563
#SPJ11
a 400 ml sample of a 0.100 m formate buffer, ph 3.75, is treated with 3 ml of 1.00 m koh . what is the ph following this addition? ( pka for formic acid is 3.75)'
The pH following the addition of KOH is still 3.75.
To determine the pH following the addition of KOH to the formate buffer, we need to consider the reaction between formate (HCOO-) and hydroxide (OH-) ions. The balanced chemical equation for the reaction is:HCOO- + OH- -> H2O + HCO3-Since 3 mL of 1.00 M KOH is added to a 400 mL sample of the formate buffer, we can calculate the number of moles of OH- added:
moles of OH- = volume of KOH (L) * concentration of KOH (M)
= 0.003 L * 1.00 M
= 0.003 mol
The number of moles of OH- is equal to the number of moles of HCOO- consumed in the reaction. Since the initial concentration of formate is 0.100 M and the volume of the buffer is 0.4 L (400 mL converted to liters), we can calculate the initial moles of formate:
initial moles of HCOO- = initial concentration of HCOO- (M) * volume of buffer (L)
= 0.100 M * 0.4 L
= 0.040 mol
The moles of formate remaining after the reaction is:
moles of HCOO- remaining = initial moles of HCOO- - moles of OH- added
= 0.040 mol - 0.003 mol
= 0.037 mol
To calculate the final concentration of formate, we divide the moles remaining by the volume of the buffer:
final concentration of HCOO-
= moles of HCOO- remaining / volume of buffer (L)
= 0.037 mol / 0.4 L
= 0.0925 M
Since the final concentration of formate is equal to the initial concentration of formate, the pH remains the same. Therefore, the pH following the addition of KOH is still 3.75.
To know more about pH, click here
https://brainly.com/question/2288405
#SPJ11
for each of the given pairs of elements, pick the atom with the following characteristics. (mg and k) (a) more favorable (exothermic) electron affinity
When comparing the elements magnesium (Mg) and potassium (K), the atom with the more favourable (exothermic) electron affinity is potassium (K).
Electron affinity refers to the energy change that occurs when an atom gains an electron. It is a measure of the atom's ability to attract and hold onto electrons. A more negative electron affinity value indicates a stronger attraction for electrons. In this case, we are comparing magnesium (Mg) and potassium (K).
Magnesium is located in Group 2 of the periodic table, while potassium is in Group 1. As we move down a group in the periodic table, the electron affinity generally decreases due to the increasing atomic size. Therefore, potassium, being located in Group 1, is likely to have a more negative electron affinity than magnesium.
This means that potassium is more favourable in terms of gaining electrons, making its electron affinity more exothermic than that of magnesium.
Learn more about periodic table here:
https://brainly.com/question/28747247
#SPJ11
how many c−c bonds in the molecule do you expect to be shorter than the others?
The number of C-C bonds that are expected to be shorter than the others in a molecule can vary depending on the specific compound and its structure.
The length of a C-C bond in a molecule depends on several factors, including the hybridization of the carbon atoms involved and the presence of any double or triple bonds. In general, a single bond between two carbon atoms is longer than a double or triple bond. Double bonds are shorter and stronger than single bonds, while triple bonds are even shorter and stronger than double bonds.
Therefore, in a molecule that contains multiple C-C bonds, the presence of double or triple bonds can result in some C-C bonds being shorter than others. The exact number of shorter C-C bonds will depend on the specific arrangement of atoms and bonds in the molecule. To determine the number of shorter C-C bonds in a particular compound, it is necessary to analyze its molecular structure.
Learn more about triple bonds here:
https://brainly.com/question/19331363
#SPJ11
In the nitrogen cycle, nitrification occurs in which of the following steps?
A) Step 1 (N2 -> Organic nitrogen)
B) Step 2 (Organic nitrogen -> Ammonium)
C) Step 3 (Ammonium -> Nitrate & nitrite)
D) Step 4 (Nitrate & Nitrite -> N2)
In the nitrogen cycle, nitrification occurs in Step 3 (Ammonium -> Nitrate & nitrite). The correct option is C.
Because it is a crucial component of amino acids, proteins, and nucleic acids, nitrogen is necessary for all living things. The movement of nitrogen from the environment to living things is referred to as the nitrogen cycle. The nitrogen cycle has four primary stages: assimilation, denitrification, nitrogen fixation, and nitrification.
The process of converting atmospheric nitrogen into ammonium is known as nitrogen fixation. Nitrification is the process by which the ammonium produced is converted into nitrite and nitrate.
There are two steps in the nitrification process. Bacteria convert ammonium into nitrite in the first step, which is then converted into nitrate in the second step. The process by which nitrogen enters living things is called assimilation.
To know more about nitrogen cycle:
https://brainly.com/question/25419904
#SPJ11
what is the amount in grams of edta needed to make 479.2 ml of a 0.06 m edta solution. the molar mass of edta is 374 g/mol. (only enter numeric value in the answer, do not include the unit)
The amount in grams of edta needed to make 479.2 ml of a 0.06 m edta solution is 10.75g
The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Volume of Edta = 479.2 ml
Concentration = 0.06 M
Moles = Concentration × Volume in liters
= 0.06 × 0.479 = 0.028 moles
Mass of Edta = moles × molar mass
= 0.028 × 374 = 10.75 g
Learn more about Moles, here:
https://brainly.com/question/15209553
#SPJ4
the value of ksp for pbcl2 is 1.6 ×10-5. what is the lowest concentration of cl-(aq) that would be needed to begin precipitation of pbcl2(s) in 0.010 m pb(no3)2 ? (use a calculator on this question.)
The lowest concentration of Cl-(aq) needed to begin precipitation of PbCl2(s) in 0.010 M Pb(NO3)2 is approximately 1.27 × 10-4 M.
What is the minimum concentration of Cl-(aq) required for precipitation of PbCl2 in 0.010 M Pb(NO3)2?
To determine the lowest concentration of Cl-(aq) that would initiate the precipitation of PbCl2, we need to compare the ion product (Q) with the solubility product constant (Ksp). The balanced chemical equation for the dissolution of PbCl2 is:PbCl2(s) ⇌ Pb2+(aq) + 2Cl-(aq)
The solubility product expression for PbCl2 is:Ksp = [Pb2+][Cl-]^2
In the given solution, the concentration of Pb2+ is 0.010 M. To find the minimum concentration of Cl-(aq), we can rearrange the Ksp expression:
[Cl-] = √(Ksp / [Pb2+])Substituting the values into the equation:
[Cl-] = √(1.6 × 10^-5 / 0.010)
= √1.6 × 10^-3
≈ 1.27 × 10^-4 M
Therefore, the lowest concentration of Cl-(aq) required to initiate the precipitation of PbCl2 in a solution with 0.010 M Pb(NO3)2 is approximately 1.27 × 10^-4 M.
Learn more about concentration
brainly.com/question/12265114
#SPJ11
draw the products formed when β -d-galactose reacts with ethanol and hcl .
When β-d-galactose reacts with ethanol and HCl, the products that are formed are ethyl-β-d-galactopyranoside and water.
β-d-galactose, ethanol, and HCl react to produce ethyl-β-d-galactopyranoside and water. The reaction that occurs between these chemicals is a condensation reaction, whereby a molecule of water is removed to produce the desired product. Ethanol acts as a catalyst in this reaction, and HCl helps in the removal of water.
Here is the equation for this reaction:C12H22O11 + C2H5OH → C14H26O6 + H2Oβ-d-galactose has a cyclic structure, so it undergoes a ring-opening reaction with ethanol, resulting in ethyl-β-d-galactopyranoside and water. The cyclic structure of β-d-galactose is shown in the diagram below: The reaction between β-d-galactose and ethanol results in the formation of ethyl-β-d-galactopyranoside, which has the following structure:
To know more about galactose reacts visit:
https://brainly.com/question/31819544
#SPJ11
select the single best answer.classify ch3nh2 as a strong or weak acid or base.
CH3NH2 is classified as a weak base. This is because it doesn't completely dissociate in water, and it only accepts a limited number of hydrogen ions (H+).
A base is a chemical species that donates electron pairs, which means it accepts protons. A weak base, such as CH3NH2, is only able to donate a small amount of electron pairs. In water, it can't ionize completely, as it only takes up a few protons, and then it reaches its equilibrium point.
Here is the balanced chemical equation of CH3NH2 ionizing in water:CH3NH2 + H2O ⇄ CH3NH3+ + OH-We can also calculate the base ionization constant (Kb) of CH3NH2 as follows: Kb = [CH3NH3+][OH-] / [CH3NH2]Thus, it is concluded that CH3NH2 is a weak base.
To know more about ionization refer to:
https://brainly.com/question/30831422
#SPJ11
what is the mass of 26.8l ozone gas (o3) at stp? round to 3 significant figures.
The mass of 26.8L ozone gas (O3) at STP is 72.7 g. Therefore, the mass of 26.8L ozone gas (O3) at STP is 72.7 g.
Given that the volume of ozone gas (O3) is 26.8L.The formula for the mass of any gas is:m = DRT/PM, where D is the density of the gas at STP,R is the gas constant, T is the temperature at STP, and P is the pressure at STP. At STP, T = 273 K, P = 1 atm, andD for ozone gas (O3) is 2.14 g/L.
Substituting these values, we get:m = 2.14 g/L × 273 K / 1 atm × 26.8 L × 48 g O3 / 1 mol= 72.7 g (rounded to 3 significant figures).Therefore, the mass of 26.8L ozone gas (O3) at STP is 72.7 g.
To know more about mass visit:
https://brainly.com/question/11954533
#SPJ11
If 3.50 mol of Fe reacts with 3.00 mol of oxygen in the following reaction: 4 Fe(s) + 3 O2(g) → 2 Fe2O3(s) Which of the following statements is correct? If 3.50 mol of Fe reacts with 3.00 mol of oxygen in the following reaction: 4 Fe(s) + 3 O2(g) → 2 Fe2O3(s) Which of the following statements is correct?
a)Fe is the limiting reactant and 1.75 mol of product can be produced.
b)O2 is the limiting reactant and 2.00 mol of product can be produced.
c)Fe is the excess reactant and 1.75 mol of product can be produced.
d)O2 is the excess reactant and 2.00 mol of product can be produced.
Given: Moles of Fe = 3.50 mol Moles of O2 = 3.00 mol4 Fe(s) + 3 O2(g) → 2 Fe2O3(s)Here, 4 moles of Fe reacts with 3 moles of O2 to produce 2 moles of Fe2O3.
The correct answer is: B) O2 is the limiting reactant and 2.00 mol of product can be produced.
Therefore, we will determine the number of moles of Fe2O3 produced when 3 moles of O2 react with Fe. So,First, we determine the number of moles of Fe that can react with O2. As per the balanced equation,4 mol Fe reacts with 3 mol O2So, we need to first calculate how many moles of Fe can be reacted with 3 mol O2.This is given by:Fe/O2 = 4/3 = 1.33 (mole ratio)So,Fe reacted = 1.33 molNow, as the number of moles of Fe present in the reaction mixture is 3.50 mol. This means that Fe is in excess.
As per the balanced equation,4 mol Fe reacts with 3 mol O2So, 1.33 mol Fe reacts with 1 mol O2So, 3 mol O2 reacts with (1.33/1) × 3 = 3.99 mol Fe (rounded off to 4 mol)Now, as the O2 is in limiting quantity, we can calculate the number of moles of Fe2O3 formed using O2, which is 3.00 mol.Fe/O2 = 4/3 = 1.33 (mole ratio)O2 reacted = 3.00 molFe reacted = 3.00 × (3/4) = 2.25 molThe mole ratio of Fe2O3 and O2 is 2/3.So, the number of moles of Fe2O3 formed will be (2/3) × 3.00 mol = 2.00 mol.
To know more about moles visit:
https://brainly.com/question/15209553
#SPJ11
Draw and name the organic product of the following reaction? benzene + CH3Cl---AlCl3----->????+HCl
The reaction of benzene and CH3Cl with AlCl3 yields the product methylbenzene or toluene (C6H5CH3) and HCl.
The Friedel-Crafts alkylation reaction of benzene with CH3Cl in the presence of anhydrous aluminum trichloride (AlCl3) as a catalyst produces methylbenzene or toluene (C6H5CH3) as the organic product and hydrogen chloride (HCl) as a byproduct.
The reaction mechanism of the Friedel-Crafts alkylation reaction of benzene with methyl chloride can be explained as follows: Formation of carbocation(1) CH3Cl + AlCl3 → CH3+AlCl4-Step 2:Reaction of benzene with carbocation(2) C6H6 + CH3+AlCl4- → C6H5CH3+AlCl4-The reaction can be shown as:C6H6 + CH3Cl → AlCl3C6H5CH3 + HCl In this reaction, the electrophile (CH3+) produced from the reaction of CH3Cl with AlCl3 attacks the benzene ring to form a resonance-stabilized carbocation that reacts further with CH3Cl to produce the toluene product.
To know more about benzene visit:
https://brainly.com/question/31837011
#SPJ11
One pound-mass of water fills a container whose volume is 2 ft^3 The pressure in the container is 100 psia.
Calculate the total internal energy and enthalpy in the container.
The total internal energy in the container is approximately 38,738,520 Btu, and the total enthalpy is approximately 38,831,104.2 Btu.
To calculate the total internal energy and enthalpy in the container, we need to use the specific volume of water and the specific internal energy and enthalpy values at the given pressure.
First, we convert the volume from cubic feet (ft³) to cubic inches (in³) since the specific volume of water is typically given in terms of in³/lbm.
1 ft³ = 12³ in³ = 1728 in³
So, the volume of water in the container is [tex]\begin{equation}2\text{ ft}^3 \times \frac{1728\text{ in}^3}{\text{ft}^3} = 3456\text{ in}^3[/tex].
Next, we need the specific volume of water. At the given pressure of 100 psia, the specific volume of water is approximately 0.01604 in³/lbm.
Now we can calculate the total internal energy and enthalpy using the formulas:
Internal Energy = Mass * Specific Internal Energy
Enthalpy = Mass * Specific Enthalpy
The mass of water can be calculated using the specific volume:
[tex]\begin{equation}Mass = \frac{Volume}{Specific Volume} = \frac{3456\text{ in}^3}{0.01604\text{ in}^3/\text{lbm}} = 215214\text{ lbm}[/tex]
Using the specific internal energy and enthalpy values at the given pressure, let's assume the values are approximately 180 Btu/lbm and 180.3 Btu/lbm, respectively.
Internal Energy = 215214 lbm * 180 Btu/lbm = 38,738,520 Btu
Enthalpy = 215214 lbm * 180.3 Btu/lbm = 38,831,104.2 Btu
Therefore, the total internal energy in the container is approximately 38,738,520 Btu, and the total enthalpy is approximately 38,831,104.2 Btu.
To know more about the internal energy refer here :
https://brainly.com/question/31432545#
#SPJ11
Determine the equilibrium constant for the following reaction at 298 K. CIO(g) + O2(g) → Cl(g) + O3(8) AG° = 34.5 kJ/mol 0.986 4.98 x 10-4 8.96 x 10-7 5.66 x 105 1.12 x 106
the equilibrium constant for the given reaction at 298 K is 8.96 x 10^-7.
The equilibrium constant for the given reaction, CIO(g) + O2(g) → Cl(g) + O3(g), at 298 K can be determined using the Gibbs free energy of the reaction and the following equation:ΔG° = - RT lnK
where ΔG° is the standard Gibbs free energy change, R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant.
The equation can be rearranged to solve for K:K = e^(-ΔG°/RT)where e is the natural logarithmic base, and all other variables are the same as in the previous equation.Substituting the given values,
we have:ΔG° = 34.5 kJ/molR = 8.314 J/(mol·K)T = 298 K
Using these values, we get:-
ΔG°/RT = (-34.5 × 10^3 J/mol) / (8.314 J/(mol·K) × 298 K)
= -13.19e^(-ΔG°/RT) = e^(-13.19) = 8.96 × 10^-7
Therefore, the equilibrium constant for the given reaction at 298 K is 8.96 x 10^-7.
learn more about equilibrium constant here
https://brainly.com/question/3159758
#SPJ11
Pipe insulation, vinyl flooring, and ceiling insulation in older homes and buildings may be sources of: carbon monoxide chloroform asbestos formaldehyde
Pipe insulation, vinyl flooring, and ceiling insulation in older homes and buildings may be sources of asbestos.
Asbestos has been widely used in construction materials until the early 1980s. Asbestos-containing materials (ACMs) are still present in many older buildings and homes, and may pose a risk to those who work or live in them. ACMs are still present in several building materials, including pipe insulation, vinyl flooring, and ceiling insulation in older homes and buildings. These materials should be treated with caution since their fibers, if inhaled, can cause mesothelioma and other lung cancers.
Asbestos is a group of six naturally occurring silicate minerals that can be mined and processed into several materials. Fibrous minerals were widely used in the construction industry, shipbuilding, and fireproofing until the early 1980s. While asbestos is no longer used in construction materials, it can still be found in many older homes and buildings built before the 1980s. Asbestos fibers can be released into the air if ACMs become damaged or weathered. These fibers, if inhaled, can cause severe lung diseases such as asbestosis, mesothelioma, and lung cancer.
To learn more about insulation visit;
https://brainly.com/question/14363642
#SPJ11
Please, someone help me.
The mass of the ammonium nitrite that is needed is 6.4 g
What is the stoichiometry?Stoichiometry is based on the law of conservation of mass, which states that matter cannot be created or destroyed in a chemical reaction. Therefore, the total mass of the reactants must be equal to the total mass of the products.
The equation of the reaction is;
[NH4]NO2 → N2 + 2H2O
We have the pressure is;
97.8 kPa - 2.5 Kpa = 95.3 kPa or 0.94 atm
PV = nRT
n = PV/RT
n = 0.94 * 2.58/0.082 * 294
n = 0.1 moles
If the reaction 1:1, mass of the ammonium nitrite is;
0.1 moles * 64 g/mol
= 6.4 g
Learn more about stoichiometry:https://brainly.com/question/28780091
#SPJ1
at constant pressure, the combustion of 15.0 g of c2h6(g) releases 777 kj of heat. what is δh for the reaction given below? 2 c2h6(g) 7 o2(g) → 4 co2(g) 6 h2o(l)
ΔH for the given reaction is 3114 kJ/mol. This indicates the heat released per mole of reaction occurring.
To determine ΔH for the given reaction, we need to use the stoichiometric coefficients and the heat released for the combustion of 15.0 g of [tex]C_{2}H_{6}[/tex].
The molar mass of [tex]C_{2}H_{6}[/tex] is calculated as follows:
2 mol of C = 2 × 12.01 g/mol = 24.02 g/mol
6 mol of H = 6 × 1.01 g/mol = 6.06 g/mol
Total molar mass of C2H6 = 24.02 g/mol + 6.06 g/mol = 30.08 g/mol
Now, we can calculate the moles of [tex]C_{2}H_{6}[/tex]: moles of [tex]C_{2}H_{6}[/tex] = mass / molar mass = 15.0 g / 30.08 g/mol ≈ 0.498 mol
From the balanced equation, we can see that the stoichiometric coefficient of [tex]C_{2}H_{6}[/tex] is 2. Therefore, the heat released for the combustion of 0.498 mol of [tex]C_{2}H_{6}[/tex] is: ΔH = (777 kJ / 0.498 mol) × 2 = 3114 kJ/mol
Thus, ΔH for the given reaction is 3114 kJ/mol. This indicates the heat released per mole of reaction occurring.
To know more about stoichiometric coefficients, refer here:
https://brainly.com/question/14465605#
#SPJ11
T/F: the causes of incomplete combustion are insufficient time, insufficient oxygen, insufficient mixing, and dissociation.
False. The causes of incomplete combustion are insufficient oxygen, insufficient time, and insufficient temperature.
Insufficient oxygen is the primary cause of incomplete combustion, as it limits the availability of oxygen for the fuel to fully burn. Insufficient time refers to situations where the combustion process is rushed, such as in rapid combustion or flameouts. Insufficient temperature can also contribute to incomplete combustion, as low temperatures may not provide enough energy for complete oxidation.
Insufficient mixing and dissociation are not typically considered as direct causes of incomplete combustion. Insufficient mixing can result in uneven distribution of fuel and oxygen, leading to localized areas of incomplete combustion, but it is not a primary cause. Dissociation refers to the breakdown of chemical compounds into their constituent elements, and it typically occurs at high temperatures. While dissociation can influence the combustion process, it is not a direct cause of incomplete combustion.
Therefore, the statement is false as it includes insufficient mixing and dissociation as causes of incomplete combustion, which is incorrect.
To know more about combustion visit:
https://brainly.com/question/13251946
#SPJ11
At 2000 k the partial pressures of an equilibrium mixture of h2s, h2, and s are 0.0252 , 0.0492 , and 0.0352 atm, respectively. calculate the value of the equilibrium constant kp at 2000 k.
H ₂(g)+ S(g) ⇌ H ₂(g) + S(g)
The value of the equilibrium constant Kp at 2000 K is approximately 14.521.
To calculate the equilibrium constant Kp at 2000 K, we need to use the partial pressures of the gases in the equilibrium mixture.
The balanced equation for the reaction is:
H₂(g) + S(g) ⇌ H₂S(g)
The equilibrium constant expression is given by:
Kp = (P(H₂S) / (P(H₂) * P(S))
Partial pressures:
P(H₂S) = 0.0252 atm
P(H₂) = 0.0492 atm
P(S) = 0.0352 atm
Now we can substitute these values into the equilibrium constant expression:
Kp = (0.0252) / (0.0492 * 0.0352)
= 0.0252 / 0.00173424
≈ 14.521
Learn more about equilibrium constants at https://brainly.com/question/3159758
#SPJ11
draw the structural formula of the product of the reaction shown below na and och2ch3-
The structural formula of the product of the reaction shown below Na and OCH2CH3- is CH3CHO, which is Acetaldehyde.
Acetaldehyde is a colorless liquid and is an organic chemical compound with a chemical formula of CH3CHO. It is an important building block in the chemical industry. Acetaldehyde is also produced by plants and is found in ripe fruits, coffee, and bread. Acetaldehyde is produced industrially from the oxidation of ethanol and ethylene. It is also produced by the partial dehydrogenation of ethanol by the liver enzyme alcohol dehydrogenase.
In the reaction given below, the given chemical compound OCH2CH3- is a negative ion, which is known as an ethoxide ion (C2H5O-). The reaction takes place with Na metal. The reaction proceeds as follows:OCH2CH3- + Na → CH3CHO + NaOH Hence, the structural formula of the product of the reaction shown below Na and OCH2CH3- is CH3CHO.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11