How many joules are required to convert 16. 5 g of ice at 0.0°C to liquid water at 32. 0°C?

Answers

Answer 1

7718.04 J joules are required to convert 16. 5 g of ice at 0.0°C to liquid water at 32. 0°C

Specific heat, the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree. The units of specific heat are usually calories or joules per gram per Celsius degree.

Latent heat of fusion, also known as enthalpy of fusion, is the amount of energy that must be supplied to a solid substance (typically in the form of heat) in order to trigger a change in its physical state and convert it into a liquid (when the pressure of the environment is kept constant).

heat require to convert 16.5 g of ice at 0°C to water at 0°C

Q1 =  [tex]mH_{f}[/tex] = 16.5 * 334 = 5511 J

heat require to convert 0°C of water to water at 32. 0°C

Q2 = mcΔT = 16.5 * 4.18 *(32-0) = 2207.04 J

Total heat = Q1 + Q2

                 = 5511 J + 2207.04 J = 7718.04 J

To learn more about Latent heat of fusion here

https://brainly.com/question/14321031

#SPJ4


Related Questions

A particle of mass 16kg travelling with a velocity of 10m/s is acted upon by a steady force of friction in a direction opposite that of its motion. Find the speed of the particle after 10 seconds if the force of friction is 25N.​

Answers

The speed of the particle after 10 seconds is, 25.88m/s.

To find the answer, we have to know more about the equations of motion.

How to find the speed of the particle after 10s?It is given that,

                          [tex]m=16kg\\u=10m/s\\t=10s\\f=25N[/tex]

It is clear from the question that, the motion is balanced by the frictional force. Thus, the acceleration will be,

                        [tex]ma=f\\a=\frac{f}{m} =\frac{25}{16}=1.6m/s^2[/tex]

We have the equation of motion for the distance travelled as,

           [tex]S=ut+\frac{1}{2}at^2=(10*10)+(\frac{1.6*10^2}{2})=178.13m[/tex]

Thus, by another equation of motion connecting a, S, and u, we get the final speed after 10s as,

                [tex]v=\sqrt{u^2+2aS} =\sqrt{10^2+(2*1.6*178.13)} =25.88m/s[/tex]

Thus, we can conclude that, the speed of the particle after 10 seconds is, 25.88m/s.

Learn more about the equations of motion here:

https://brainly.com/question/24595388

#SPJ1

A generator produces 38 mwmw of power and sends it to town at an rms voltage of 78 kvkv. part a what is the rms current in the transmission lines?

Answers

The rms current in the transmission lines is I = 487.18 A.

The root-imply-rectangular (rms) voltage of a sinusoidal supply of electromotive force  is used to represent the source. it is the rectangular root of the time average of the voltage squared.

Alternating-present day circuits. the root-imply-square (rms) voltage of a sinusoidal source of electromotive force is used to symbolize the supply. it's far the square root of the time average of the voltage squared.

Electric power is  by using present day or the waft of electric fee and voltage or the capacity of rate to deliver electricity. A given cost of power can be produced by using any combination of contemporary and voltage values

power = 38 M watt

rms voltage = 78 K v

power = IV

I = power/V

I = (38 * 1000000)/78*1000

I = 487.18 A.

Learn more about rms current here:-https://brainly.com/question/20913680

#SPJ4

To determine whether a celestial body is approaching or receding from earth, astronomers employ?

Answers

To determine whether a celestial body is approaching or receding from Earth, astronomers employ The Doppler principle.

There is a Doppler effect for both light and sound.

For instance, astronomers regularly measure the amount to which a star or galaxy's light is "stretched" towards the lower frequency, red region of the spectrum to calculate how quickly the object is travelling away from us.

A wave's frequency changes in response to an observer moving in respect to the wave source, which is known as the Doppler effect or Doppler shift.

The Doppler effect results from the fact that as the wave source moves in the direction of the observer, the crest of each succeeding wave emerges from a location that is closer to the observer than the crest of the previous wave.

As a result, each wave travels to the observer slightly faster than the one before it. As a result, the interval between successive wave crests arriving at the observer is shorter, increasing the frequency.

Learn more about Doppler effect here https://brainly.com/question/4052291

#SPJ4

How would you expect people from two different cultures to differ in their sense and perception of smell

Answers

even when two cultures share the same language and many traditions, their reactions to the same smells can be different

What is the date and latitude for the greatest amount of insolation in the southern hemisphere?

Answers

The day of the year that has the greatest amount of insolation is June 20 or 21, and December 21 or 22 in the Southern Hemisphere.

Solar radiation that enters the Earth's atmosphere or surface is known as insolation. Only around 52% of this insolation reaches the surface of the earth. The remainder is reflected by the Earth's surface and dispersed by airborne particles, or it is absorbed by water vapor, dust, and clouds.

The portion of Earth south of the equator, a hypothetical horizontal line that circles the planet halfway between its poles, is known as the southern hemisphere. The Northern Hemisphere sees its peak insolation and summer on June 21 as a result of the Earth's continuous motion, with the highest overhead sun now over the Tropic of Cancer (23.5° N).

To know more about southern hemisphere refer to:  https://brainly.com/question/13661560

#SPJ4

Write an equation that expresses the first law of thermodynamics in terms of heat and work.

Answers

Answer:

Heat Input = Work Output       (at 100% efficiency)

ΔQ = ΔW

(you cannot get something for nothing)

Observing star clusters will give astronomers needed data for stellar evolution because all the stars in the cluster have the same ___.

Answers

Observing star clusters will give astronomers needed data for stellar evolution because all the stars in the have the same Age

A star changes over time through a process called stellar evolution. A star can have a life that is substantially longer than the age of the universe, ranging from a few million years for the most massive to billions of years for the least massive.

Stellar evolution is a term used to describe how stars change through time. Most stars don't seem to change much on a human time scale, but if we looked for billions of years, we would witness how stars are born, how they grow older, and then how they die. Stellar evolution is significant because it produces the majority of the components.

To learn more about Stellar evolution please visit-
https://brainly.com/question/12790561
#SPJ4

You start walking from a point on a circular field of radius 0.5 km and 1 hour later
you are at the same point. What is your average speed for the whole journey?

Answers

Answer:

1). average velocity= displacement/time

= here displacement is zero

= 0/1

= 0 m/s

2). average speed= total distance/time

=2πr/1

=(2×22/7×5/10)/1

22/7

3.14 km/h

hope it helps you

please mark brainliest

Explanation:

Answer:

[tex]\sf \fbox{speed = 3.14 kmph}[/tex]

Explanation:

Given:

Radius of circular field (r) = 0.5 Km

Time taken to complete one round of field (t)= 1 hour

To find:

Average speed for the whole journey=?

Solution:

To find the average speed we will have to find the actual distance covered in given time, & the actual distance covered would be equal to the

[tex] \sf \: perimeter \: of \: circular \: field = 2 \pi r \\ \sf 2 \pi r = 2 \times 3.14 \times 0.5 = 3.14 \: km[/tex]

Distance covered in 1 hour is 3.14 km,

[tex]\small \sf Average \: speed = \frac{Distance}{Time} = \frac{3.14}{1} \\ \small \sf \fbox{speed = 3.14 kmph}[/tex]

[tex] \small\sf \: Thanks \: for \: joining \: brainly \: community! [/tex]

What is the function of a diaphragm in a camera?

It controls the speed of the shutter.
It focuses incoming light rays.
It controls the amount of light.
It directs the image to the viewfinder.

Answers

It controls the amount of lighting through it

Select the correct answer. which of these is a scalar quantity? a. acceleration b. displacement c. length d. velocity

Answers

Answer:

length

Explanation:

For a body to be in SHM, the restoring force must be __________ to displacement from equilibrium.

Answers

Answer:

Proportional

Explanation:

The conditions that must be met to produce SHM are;

-The restoring force must be proportional to the displacement and act opposite to the direction of motion with no drag forces or friction.

- The frequency of oscillation does not depend on the amplitude.

When 6a of ac current at 114 v flows in the primary coil of an ideal transformer, how many amps at 29 v wul flow in the secondary?

Answers

The current that will flow in the secondary coil will be 23.5 Amperes

Power is the rate per unit time, at which electrical energy is transferred by an electrical circuit.

The SI unit of power is the watt and is given by Voltage * Current

Let's solve the question:

Given:

Voltage ( Primary ) = Vp = 114 V

Current ( Primary ) = Ip = 6 A

Voltage ( Secondary ) = Vs = 29 V

Current ( Secondary ) = Is = ?

In Ideal Transformer Primary Power = Secondary Power

Therefore, Vp * Ip = Vs * Is

                  114 * 6 = 29 * Is

                   684 = 29 Is

                   Is = 23.5 Amperes

To learn more about Transformer click below :

https://brainly.com/question/15200241

# SPJ4

According to hubble's law, with = 70 km/s. What is the recessional velocity of a galaxy at a distance of 180 mpc?

Answers

The recessional velocity of a galaxy at a distance of 180 mpc will be 70 km/sec

Hubble's law, which says simply that a galaxy's velocity (or as is sometimes plotted, its redshift) is directly proportional to its distance, also tells us something important about the state of the universe. If the universe is static and unchanging, there should be no correlation between distance and velocity.

Recessional velocity is the rate at which an extragalactic astronomical object recedes (becomes more distant) from an observer as a result of the expansion of the universe. It can be measured by observing the wavelength shifts of spectral lines emitted by the object, known as the object's cosmological redshift.

Recessional velocity = Hubble's  constant *  distance

                                  = 70 km/sec/Mpc * 180 Mpc

                                  = 70 km/sec

To learn more about recessional velocity here

https://brainly.com/question/19578750

#SPJ4

If you apply 10.0 n of force to lift an object with a single, fixed pulley, then what is the resistive force?

Answers

Resistive force against 10.0 N of force to lift an object with a single, fixed pulley will be 10 N

Resistive force is a force, or the vector sum of numerous forces, whose direction is opposite to the motion of a body

A resistive force is one that inhibits or resists the motion of an object. It acts in a direction opposite to any motion or applied force that is trying to move the object. The most common resistive force is friction where an object is held back from sliding across a surface.

The force that the string (or similar) exerts on the object in these types of problems is called tension. Resistive Forces These include: Friction which is a force that prevents, or tries to prevent, the slipping or sliding of two surfaces in contact.

Hence , resistive force against 10.0 N of force to lift an object with a single, fixed pulley will be 10 N but in opposite direction to where pulley is been lifted .

To learn more about friction

https://brainly.com/question/13000653

#SPJ4

A collection of a fixed number of elements (called components) arranged in n dimensions ( n >= 1) is called a(n) ____.

Answers

A collection of a fixed number of elements (called components) arranged in n dimensions ( n >= 1) is called a(n) n- dimensional array

an array of dimensions gives Information about the material composition for each point in the heterogeneous part is stored in N.

Similar to a one-dimensional array, a two-dimensional array is represented graphically as a grid (or table) with rows and columns.

A big gathering of objects or people is referred to as a "array," especially one that is eye-catching, inspires admiration, or has been arranged in a particular way: The spread of food on the table was magnificent. They were seated in front of numerous microphones and cameras. Related words and phrases are part of the SMART Vocabulary. Things in groups and collections

To learn more about array please visit-
https://brainly.com/question/13107940
#SPJ4


A vector of magnitude 20 is added to a vector of magnitude 25. the magnitude of this sum can be?

Answers

The sum of vectors lie between 5 - 45

We all know that Vector is a quantity of Magnitude and Direction.

Couple of examples of Vector quantity are Acceleration, Displacement, Force, Momentum, Velocity

Let's solve the problem:

I A I is given as 20

I B I is given as 25

The sum of vectors lie between their maximum and minimum

Hence,

MIn < Sum of Vectors < Max

I A-B I < Sum of Vectors < I A + B I

I 20 - 25 I < Sum of Vectors < I A + B I

5 < Sum of Vectors < 45

For more information on Vectors click here

https://brainly.com/question/14480157

# SPJ4

When a small force is applied to a gyro, the result will instead occur 90 degrees ahead of that point, in the direction of rotation. this principle is known as:_____.

Answers

When a small force is applied to a gyro, the result will instead occur 90 degrees ahead of that point, in the direction of rotation. this principle is known as: Precession

What is precession?

Precession is a shift in the direction of a rotating body's rotational axis. It can be described as a modification of the first Euler angle in the proper reference frame, while the rotation itself is defined by the third Euler angle. In other terms, a body is said to be precessing about a second axis if its own axis of rotation is spinning about that second axis. Nutation is a motion in which the second Euler angle varies. Precession can be either torque-free or torque-induced in physics.

To learn more about Precession from the given link:

https://brainly.com/question/4880418

#SJP4

What is the concentration of the acute leukemia cc95 combination value in micromolar (μm) units?

Answers

The concentration of the acute leukemia cc95 combination value in micromolar (μm) units is  6 × 10-4 μM.

Acute lymphocytic leukemia (ALL) is also called acute lymphoblastic leukemia. “Acute” means that the leukemia can progress quickly, and if not treated, would probably be fatal within a few months. "Lymphocytic" means it develops from early (immature) forms of lymphocytes, a type of white blood cell.

A rapidly progressing cancer that starts in blood-forming tissue such as the bone marrow, and causes large numbers of white blood cells to be produced and enter the blood stream.

In acute leukemia, the abnormal blood cells are immature blood cells (blasts). They can't carry out their normal functions, and they multiply rapidly, so the disease worsens quickly. Acute leukemia requires aggressive, timely treatment.

This corresponds to 0.6 × 10^-9 M × (1 μM/1 × 10^-6 M) = 0.6 × 10^-3 μM = 6 × 10-4 μM.

Acute myeloid leukemia (AML) is caused by a DNA mutation in the stem cells in your bone marrow that produce red blood cells, platelets and infection-fighting white blood cells. The mutation causes the stem cells to produce many more white blood cells than are needed.

To learn more about Acute lymphocytic leukemia

https://brainly.com/question/10483684

#SPJ4

A 24-kw electric furnace is connected to a 240-v line. what is the resistance of the furnace? group of answer choices

Answers

The resistance of the furnace is 2.4 ohm

Given,

P=24kW, V=240v,

P=[tex]\frac{V^{2} }{R}[/tex],  24kW=[tex]\frac{240^{2} }{R}[/tex], Therefore R=2.4 ohm

Resistance

A force that opposes the flow of current is electrical resistance, often known as resistance to electricity. It acts as a gauge for how challenging it is for current to flow in this fashion. Ohms (), which represent resistance values, are used. Electricity will move from high to low when an electron difference exists between two terminals. This flow is opposed by resistance. Lower currents occur at higher resistance levels. The opposite is also true: the current increases as the resistance decreases. The Greek letter omega (), which represents resistance, represents ohms. German physicist Georg Simon Ohm (1784–1854), who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm. Ohm's Law was developed under his direction.

A 24-kw electric furnace is connected to a 240-v line. what is the resistance of the furnace? group of answer choices

Learn more about resistance here:

https://brainly.com/question/11431009

#SPJ4

If the pressure on a gas is increased, then its volume will decrease because the gas molecules will be pushed closer together. did the data support the hypothesis (above)? justify your answer.

Answers

Boyle's Law

As weight was added to the top of a syringe, the volume of the air trapped in the syringe decreased. The weight and the surface area of the plunger were used to calculate pressure. As more weight was added, the pressure increased. The volume decreased in response.

What is Boyle's law ?

As the pressure on a gas increases, the volume of the gas decreases because the gas particles are forced closer together. Conversely, as the pressure on a gas decreases, the gas volume increases because the gas particles can now move farther apart

A contained gas's pressure will rise when its volume is reduced, and fall when its volume is increased. In actuality, the pressure reduces by the same factor as the volume increases, and vice versa.

Learn more about Boyle's law here:

https://brainly.com/question/26040104

#SPJ4

Answer:yes

Explanation:

Sample Justification: As weight was added to the top of a syringe, the volume of the air trapped in the syringe decreased. The weight and the surface area of the plunger were used to calculate pressure. As more weight was added, the pressure increased. The volume decreased in response.

then

yes and yes

What feature of the solar system separates the terrestrial planets from the jovian planets?

Answers

Jovian Planets have low density and no Earth like things, like the terrestrial planets.

All of the planets in our solar system,except Pluto—are categorized as either terrestrial (like Earth) or jovian (like Jupiter) planets

Terrestrial planets:

The planets Mercury, Venus, Earth, and Mars are all terrestrial. These planets are both physically and mass-wise quite small. A terrestrial planet has a dense interior of metals and a stable rocky surface. These planets are warmer than planets farther from the sun because they are closer to the sun in the solar system.

Jovian planets:

Saturn, Uranus, Neptune, and Jupiter are examples of jovian planets. These planets are bigger and heavier. The surfaces of Jovian planets are not solid. Due to their size and composition, which is primarily gases, they are sometimes referred to as gas giants. Only in the deepest regions of the Jovian planets' cores can one find trace amounts of rocky elements. Jovian planets are cooler because they are farther from the sun than terrestrial planets in the solar system.

Learn more about the Solar system with the help of the given link:

https://brainly.com/question/7942530

#SPJ4

The human body has an average density of 979 kg/m^3. What fraction of a person is submerged when floating gently in fresh water?

Answers

A person is submerged of about 97.9%

The average density of the human body is given as

[tex]979kg/m {}^{3} [/tex]

What is Law of Floating?

Law of floating can be defined as the volume of the liquid

displaced when a body floats on the liquid surface is equal to the body submerged in water.

As body has the stable equilibrium state,the buoyant of the fluid will be equal to the weight.

weight of the body floating=weight of the body immersed in fluid

Law of floating=Density of the floating object/density of fluid

As fluid is the freshwater here,the density of fluid will be

[tex]1000kg/m {}^{3} [/tex]

[tex] = (979kg/m {}^{3})/(1000kgm {}^{3} )[/tex]

=97.9%

A person is submerged when floating gently in fresh water about 97.9%

Learn more about Law of floating from here: https://brainly.com/question/28162240

#SPJ4

Find the average value have of the function h on the given interval. h(u) = (ln(u))/u, [1, 5]

Answers

The average value have of the function h on the given interval is  [tex]\frac{1}{2} \ln^2 (2)[/tex].

How to find the Average Value of function ?

The given function is [tex]h (u) = \frac{\ln (u)}{u}[/tex] on the interval (1, 5).

The average value of function (a, b) is found by using the formula:

[tex]\frac{1}{(b -a)} \displaystyle \int^{b}_{a} f(x) dx[/tex]

Here the function is  [tex]h (u) = \frac{\ln (u)}{u}[/tex] and a = 1, b = 5

Now,

[tex]\dfrac{1}{(5 - 1)} \displaystyle \int^{5}_{1} \frac{\ln (u)}{u}\ du[/tex]

[tex]= \dfrac{1}{4} \displaystyle \int^{5}_{1} \frac{\ln (u)}{u}\ du[/tex]

Substitute [tex]\ln (u) = t, dt = \frac{1}{u}\ du[/tex]

[tex]\dfrac{1}{4} \displaystyle \int^{4}_{1} \frac{\ln (u)}{u} du = \frac{1}{4} \int^{4}_{1} t (dt)[/tex]

                      [tex]= \frac{1}{4} \left [\frac{t^2}{2} \right ]^{4}_{1}[/tex]

                      [tex]= \frac{1}{8} \left [\{\ln (u)\}^2 \right ]^{4}_{1}[/tex]

                      [tex]= \frac{1}{8} [\{\ln (4) \}^2 - \{\ln (1) \}^2 ][/tex]

                      [tex]= \frac{1}{8} [\{\ln (4)\}^2 - 0][/tex]

                      [tex]= \frac{1}{8} \ln^2 (4)[/tex]

                      [tex]= \frac{2}{4} [2 \ln (2)]^2[/tex]

                      [tex]= \frac{1}{2} \ln^2 (2)[/tex]

Thus from the above conclusion we can say that The average value have of the function h on the given interval is  [tex]\frac{1}{2} \ln^2 (2)[/tex].

Learn more about the Integrational Average value please click here : https://brainly.com/question/27419605

#SPJ4

Consider these observations:

The electromagnetic waves from the sun heat up Earth’s surface and atmosphere.
Sound waves from an outdoor music concert can be heard at a distance from the concert venue.
Shear waves generated by an earthquake dissipate energy at a boundary between a solid and a liquid but do not travel through the liquid.
Which of the following can be inferred, based on these observations, about energy transfer by waves as the wave travels through a medium?

A
All waves transfer energy no matter what medium they travel through.

B
All waves need a gaseous medium to travel through in order to transfer energy.

C
All waves transfer energy by the net movement of particles of the medium.

D
All waves transfer energy equally well through all types of media.

Answers

Energy is transferred by waves as the wave travels through a medium All waves transfer energy no matter what medium they travel through. the correct answer is option(a).

A wave is a disturbance that shifts energy rather than actual substance from one location to another. Energy is transferred by waves away from its source, or initial location.

Energy is transferred via electric and magnetic field vibrations in electromagnetic waves. Energy is conveyed in sound waves by the vibrating of air molecules or the particles of the substance that the sound is traveling through. The vibration of the water molecules occurs during the transmission of energy in water waves. The medium's particles only vibrate stationary. As they vibrate, they transfer the disturbance's energy to the particles nearby, which then transfer it to the particles nearby, and so forth. The wave does not truly move together with the medium's particles.

To know more about Energy refer to:  https://brainly.com/question/9624826

#SPJ1

What are the two decisions that you can make from performing a hypothesis test? what are the two decisions that you can make from performing a hypothesis test? select all that apply

Answers

When conducting a hypothesis test there are two possible decisions  that you can make: reject the null hypothesis or fail to reject the null hypothesis.

A statistical hypothesis test is a method of statistical inference used to decide whether the data at hand sufficiently support a particular hypothesis. Hypothesis testing allows us to make probabilistic statements about population parameters.

When conducting a hypothesis test there are two possible decisions: reject the null hypothesis or fail to reject the null hypothesis. You should remember though, hypothesis testing uses data from a sample to make an inference about a population. When conducting a hypothesis test we do not know the population parameters. In most cases, we don't know if our inference is correct or incorrect.

When we reject the null hypothesis there are two possibilities. There could really be a difference in the population, in which case we made a correct decision. Or, it is possible that there is not a difference in the population (i.e.,  is true) but our sample was different from the hypothesized value due to random sampling variation. In that case we made an error. This is known as a Type I error.

When we fail to reject the null hypothesis there are also two possibilities. If the null hypothesis is really true, and there is not a difference in the population, then we made the correct decision. If there is a difference in the population, and we failed to reject it, then we made a Type II error.

Learn more about hypothesis test here : https://brainly.com/question/15980493

#SPJ4

What effect does the diameter of the string have on the lever arm? explain why we can ignore this effect

Answers

The effective lever arm will be enhanced if we utilize a big diameter string.

What is Lever Arm?

The perpendicular distance from the axis of rotation to the force's line of action is specified as the lever arm.

When a big diameter string is utilized, the effect of the diameter on the string of the lever arm will be enhanced.

This is due to the reason that if the radius of the pulley is R and the radius of the string is r, then the effective lever arm becomes R+r.

If the radius,r of the string is very minute such that its addition to the radius of the pulley, R will hardly make a change to the effective lever arm, then it is avoided. However, if the radius of the string is a big number then it can not be avoided as it can make significant errors in the calculation of the effective lever arm.

Hence, The effective lever arm will be enhanced if we utilize a big diameter string.

Learn more about Lever Arm here:

https://brainly.com/question/14682047

#SPJ2

Part a a calorimeter consists of an aluminum cup inside of an insulated container. The cup is weighed on a top-loading balance and is found to have a mass of 31. 91 g. A reaction is conducted in the calorimeter, raising the temperature from 21. 2 c to 26. 1 c what is the change in heat q for the aluminum cup in units of j? aluminum has a specific heat of 0. 903 j 1 ? 1 write your answer to the correct number of significant figures.

Answers

The change in heat q for the aluminum cup is 141 J.  

What is Specific heat?

A substance's heat capacity is the amount of heat needed to increase its overall temperature by one degree. The heat capacity is known as the specific heat capacity or the specific heat if the substance's mass is unity.

change in heat -

The amount of heat Q that is transported to create a temperature shift depends on the substance and phase involved, the mass of the system, and the magnitude of the temperature change. (A) The temperature change and the amount of heat transported are directly inversely related.

The answer's sign dig is determined by a calculation's lowest sign digits.

The solution will need 3 digits because the temperatures are provided with 3 significant digits and the specified heat has 3 significant digits (the mass has 4 significant digits).

31.91 g   * 0.903 J/g-C  *  (26.1 - 21.2 C) = 141 J

to learn more about Specific Heat go to - https://brainly.com/question/21406849

#SPJ4

Calculate the gravitational potential energy is a bicycle of mass 20kg and its rider of mass 50kg cycle to the top of a hill 120 metres high.

Answers

Explanation:

Gravitational Potential Energy can be calculated with the following formula:

[tex]mgh[/tex]

Where m is mass, g is Gravitational Field Strength, and h is height. GFS on Earth is always 9.81, the combined mass of the cyclist and the bicycle is 70, and the height is 120. Multiplying these values together, we get:

82,404J.

A spaceship travels at approximately 0. 25c with respect to earth. this means 24 hours at the spaceship will be x hours to us on earth. find the time passed ton earth

Answers

The time passed on earth is  mathematically given as

t' = 24.79 hrs

What is the time passed on earth?

Generally, the equation for is time  mathematically given as

[tex]t' = \gamma t[/tex]

Where

[tex]\gamma = Lorentz\ factor \\\\\gamma = 1/ \sqrt {(1 - v^2/c^2)}[/tex]

[tex]t' = t/ \sqrt {(1 - v^2/c^2)}[/tex]

Therefore

[tex]t' = 24/ \sqrt {(1 - (0.25c/c)^2) }[/tex]

[tex]t'= 24/ \sqrt {(1 - 0.25^2)[/tex]

t' = 24.79 hrs

In conclusion, the time passed on earth

t' = 24.79 hrs

Read more about the time

https://brainly.com/question/28050940

#SPJ1

A 600-kg car makes a 90° turn. its speed before the turn is 21. 0 m/s and after the turn it is 24. 0 m/s. what is the magnitude of the change in the car's momentum during the turn?

Answers

The magnitude of the change in the car's momentum during the turn is

[tex] = 1.9 \times 10 {}^{3} kgm/s[/tex]

What is momentum?

Momentum can be defined as "mass in motion." All objects have mass,so if an object is moving, then it has momentum - it has its mass in motion.

Given:

V1=21m/s

V2=24m/s

m=600kg

To Find:

momentum

Now using Pythagoras theorem

[tex]f = ((600)(21)) {}^{2} + ((600)(24)) {}^{2} [/tex]

[tex]f = \sqrt{1.59 \times 10 {}^{8} + 2.07 \times 10 {}^{8} } [/tex]

[tex] = 1.9 \times 10 {}^{3} kgm/s[/tex]

learn more about momentum from here: https://brainly.com/question/28165726

#SPJ4

Other Questions
Jon rented a car a company that charged a daily rental fee and a mileage charge. He rented the car for 6 days and drove 400 miles and was charged $210. His friend Amanda later rented the same car for 7 days and drove 360 miles and was charged $229. What was the daily rental charge? How much did the company charge per mile? the steady state theory proposed what?A- that the density of the universe was getting biggerB - that the density of the universe was remaining constantC- that the density of the universe was getting smallerD- the universe has no density what is Hubble law ?A- the most distant the galaxy the faster it is moving away from us B- the more distance the galaxy the slower it is moving away from us C- the closer the galaxy the faster it is moving away from usD- the galaxies are not moving at allblueshift means what?A- an object is moving away from youB- an object is approaching youC- an object is not movingD- an object is bluewhich of the following did not detect the cosmic microwave background radiation?A- Hubble space telescopeB- COBEC- WMAPD- penzias and wilson When liz asks her father if he minds her borrowing the car, she notices he frowns and shakes his head. what is liz observing in her father? By selecting only senior women golfers as its target and focusing all of its efforts on making products that fit these women's needs, a firm is using a(n) ___ targeting marketing strategy. When does earth's perihelion position, the point of orbit when it is closest to the sun, occur? Another real-world example of a change is rust. rust is iron(iii) oxide (fe2o3), which results when iron is exposed to oxygen and water. what are some indicators of rusting? check all that apply. Question 9 of 25 a bookstore costs $105 a day to keep open, and it spends $12 for each book that it sells. if each book sells for $15, what is the break-even point for this bookstore? On january 29, 2017, home depot reported a $6.45 earnings per share and was trading at approximately $138 per share. what was home depot's price earnings ratio? how do i find x? pls tell me with working Jonna portrays an unfriendly and an intimidating behavior. what does jonnas behavior signify? jonnas unfriendly and intimidating behavior signifies . In the following expression, both AAA and BBB are variables that can take positive values.A+\dfrac{2}{B}A+ B2 A, plus, start fraction, 2, divided by, B, end fractionWhich of these actions will cause the expression's value to increase?Choose 2 answers:Choose 2 answers:(Choice A)AKeeping AAA constant and increasing BBB(Choice B)BKeeping AAA constant and decreasing BBB(Choice C)CIncreasing AAA and keeping BBB constant(Choice D)DDecreasing AAA and keeping BBB constant A zero-day vulnerability has been found in an e-commerce website used to purchase electronics. Neither the website owner nor the general public knows about the vulnerability; it was discovered by a computer security specialist making a purchase. What should the specialist do Calculate the standard free-energy change for the reaction at 25 c. refer to the list of standard reduction potentials. 2au3 (aq) 3cr(s)2au(s) 3cr2 (aq) Why does the heart automatically adjust the flow of blood to match activity levels?A.Extreme activity damages blood cells and the body needs replacements.B.The heart requires more oxygen when exercising.C.It reduces the level of oxygen in the blood.D.Organs and muscles require more blood under stress. What is the recommended range from which a temperature should be selected and maintained constantly to achieve targeted temperature manage? Which federal agency regulates the transportation of regulated product within the united states. Composition of two functions:Basic An increase in the expected inflation rate, other things remaining the same? I need help cancelling units. please help If you were the responding officer at a crime scene which group of people would you be responsible for controlling?