If the average daily income for small grocery markets in Riyadh
is 7000 riyals, and the standard deviation is 1000 riyals, in a
sample of 1600 markets find the standard error of the mean
3.75

the distance around the hat is (c) 21.35 inches.

The distance around a hat can be calculated using the formula for the circumference of a circle:

Circumference = π * diameter

Given that the diameter of the hat is 6.8 inches and using the value of π = 3.14, we can calculate the distance around the hat as:

Circumference = 3.14 * 6.8

Circumference ≈ 21.352 inches

Rounding to the hundredths place, the distance around the hat is approximately 21.35 inches.

Therefore, the correct answer is (c) 21.35 inches.

what is Circumference?

In mathematics, the circumference is the distance around the boundary of a closed curve or shape, such as a circle. It is the measure of the total length of the curve. For a circle, the circumference is calculated using the formula:

Circumference = π * diameter

where π is a mathematical constant approximately equal to 3.14159 (often rounded to 3.14), and the diameter is the length of a straight line passing through the center of the circle and connecting two points on its boundary.

The circumference is an important measurement used in various geometric calculations, such as determining the perimeter of a circle or the length of a curved line segment.

To know more about circumference visit:

brainly.com/question/23881522

#SPJ11

The given system of equations is inconsistent because it doesn't have any common solution. This can be explained by the fact that both of the given lines do not intersect each other at any point.Considering the given equations:y = -1/2x +3y = 4x +2The first equation can be written as:y = -0.5x + 3.

The second equation can be written as:4x - y = -2On the other hand, we know that a system of equations is consistent and coincident if there are infinite number of solutions and consistent if there is one unique solution. Therefore, the given system of equations does not have any common solution and is inconsistent.

To know more about equations visit :-

https://brainly.com/question/29657983

#SPJ11

The five inputs for the marketing product life cycle are: Year 1 sales, Years of growth, Years of decline, Peak sales, Product life cycle stages

Year 1 sales: This refers to the initial sales volume or revenue generated by the new product in its first year of introduction.

Years of growth: This represents the duration or number of years during which the sales of the product are expected to increase. It indicates the period of growth and market acceptance for the product.

Years of decline: This indicates the duration or number of years during which the sales of the product are expected to decline. It represents the period when the product starts losing market share or becomes less popular due to various factors such as competition, saturation, or changing consumer preferences.

Peak sales: This refers to the highest point or maximum level of sales that the product achieves during its life cycle. It usually occurs during the growth phase when the product is at its peak popularity and demand.

Product life cycle stages (optional): The marketing product life cycle typically consists of four stages - introduction, growth, maturity, and decline. These stages describe the overall pattern of sales and market behavior over the lifespan of a product. Including the stage durations or estimated time periods for each stage can provide further insights into the expected sales trends and dynamics of the product.

Learn more about product life cycle here:

brainly.com/question/7510515

#SPJ4

In conclusion, the most likely correct inference based on the given diagram is that Layer D was formed more recently than Layer C.

The diagram below shows different layers of sedimentary rocks, and based on the diagram, the most likely correct inference is that Layer D was formed more recently than Layer C.

Explanation: The layers of sedimentary rocks on the diagram are given as follows: A, B, C, D, E, F, and G. The principle of superposition states that sedimentary layers are older at the bottom than they are at the top of a rock formation.

As a result, we can infer the relative ages of these layers based on their order and position. Layer C is found underneath layer D and the Principle of Superposition applies.

Therefore, we can conclude that Layer D was formed more recently than Layer C.

To Know more about Principle of Superposition visit:

https://brainly.com/question/30780170

#SPJ11

The best predicted value of y corresponding to x = -5.25 is 19.0, which matches the given value of y.

To find the best predicted value of y corresponding to a given value of x, we can use the regression equation. The regression equation represents the line of best fit for the given data.

Given that the regression equation is y = -4x - 2 and the value of x is not specified, we cannot calculate the best predicted value of y directly. We need the specific value of x for which we want to find the predicted value of y.

However, we do have additional information that the value of y is 19.0. This information could be used to find the corresponding value of x by substituting y = 19.0 into the regression equation and solving for x.

19.0 = -4x - 2

Adding 2 to both sides of the equation:

21.0 = -4x

Dividing both sides by -4:

x = -5.25

Now we have the value of x, which is -5.25. We can substitute this value back into the regression equation to find the best predicted value of y:

y = -4(-5.25) - 2

y = 21.0 - 2

y = 19.0

Therefore, the best predicted value of y corresponding to x = -5.25 is 19.0, which matches the given value of y.

Learn more about predicted value here

https://brainly.com/question/29061537

#SPJ11

The z-scores that bound the middle 82% of the area under the standard normal curve are -1.34 and 1.34, entered in ascending order.

Given :The middle 82% of the area under the standard normal curve. Ascending order. Round the answers to two decimal places. So, we can solve this by using Excel. We know that the middle 82% of the area is the region between the z-scores whose cumulative probabilities are 9%2 = 91% on either side. Using the formula =NORM.INV(probability) for the inverse cumulative distribution function of the standard normal distribution, we can find the corresponding z-scores. The z-score at the 9th percentile is =NORM.INV(0.09) = -1.34 (rounded to two decimal places)The z-score at the 91st percentile is =NORM.INV(0.91) = 1.34 (rounded to two decimal places)

Know more about z-scores here:

https://brainly.com/question/30557336

#SPJ11

To determine the number of linearly independent vectors needed to span m2,3 and the basis for m2,3 has linearly independent vectors, we will need to follow the procedure below:

One billionth of a metre or one billionth of a micrometre is what is known as a nanometer (nm), which is 109 metres. Atoms and the molecules they make up are measured using this scale.

Given m2,3, this means that it has 2 rows and 3 columns.The basis for m2,3 has linearly independent vectors is equal to 2. The minimum number of linearly independent vectors required to span m2,3 is 2.This implies that there is a possibility of using more than two vectors to span m2,3. But we need only 2 linearly independent vectors to span it. We can represent these vectors as follows:`(1,0,0)` and `(0,1,0)`

To know more about nanometres visit:

https://brainly.com/question/14963637

#SPJ11

The problem involves finding the distance from a given point (12, 14, 1) to the y-z plane. The distance can be determined by finding the perpendicular distance from the point to the plane.

The equation of the y-z plane is x = 0, as it does not depend on the x-coordinate. We need to calculate the perpendicular distance between the point and the plane.

To find the distance from the point (12, 14, 1) to the y-z plane, we can use the formula for the distance between a point and a plane. The formula states that the distance d from a point (x₀, y₀, z₀) to a plane Ax + By + Cz + D = 0 is given by the formula:

d = |Ax₀ + By₀ + Cz₀ + D| / √(A² + B² + C²)

In this case, since the equation of the y-z plane is x = 0, the values of A, B, C, and D are 1, 0, 0, and 0 respectively. Substituting these values into the formula, we can calculate the distance from the point to the y-z plane.

To know more about distances  click here: brainly.com/question/31713805  

#SPJ11

Answer:

  7+√3 ≈ 8.732 meters

Step-by-step explanation:

Given a rectangle with a perimeter of 28 meters and an area of 46 square meters, you want to know the length of the longest side.

The sum of the lengths of two adjacent sides is (28 m)/2 = 14 m.

We can use this relation in the area formula. For longest side x, we have ...

  A = LW

  46 = x(14 -x)

  x² -14x = -46 . . . . . multiply by -1, simplify

  (x -7)² = -46 +49 . . . . add 49 to complete the square

  x = 7 +√3 . . . . . . . take the positive square root, add 7

The longest side is 7+√3 ≈ 8.732 meters.

<95141404393>

A rectangle with perimeter is 28 meters and area is 46 square metersthen the longest side of the rectangle is 11 meters.

Let's assume the length of the rectangle is L meters and the width is W meters. The perimeter of a rectangle is given by the formula P = 2L + 2W. In this case, we are given that the perimeter is 28 meters, so we can write the equation as 28 = 2L + 2W.

The area of a rectangle is given by the formula A = L× W. In this case, we are given that the area is 46 square meters, so we can write the equation as 46 = L×W.

We can solve these two equations simultaneously to find the values of L and W. Rearranging the perimeter equation, we get 2L = 28 - 2W, which simplifies to L = 14 - W. Substituting this value into the area equation, we have 46 = (14 - W)× W.

Simplifying further, we get [tex]46 = 14W - W^2[/tex]. Rearranging this equation, we have [tex]W^2 - 14W + 46 = 0[/tex]. Solving this quadratic equation, we find that W = 7 ± √(3). Since the width cannot be negative, we take W = 7 + √(3).

Substituting this value back into the perimeter equation, we get

28 = 2L + 2(7 + √(3)). Solving for L, we find L = 7 - √(3).

Therefore, the longest side of the rectangle is the length, which is approximately 11 meters.

Learn more about rectangles here:

https://brainly.com/question/28993977

#SPJ11

Product Property of Roots The product property of roots states that the square root of the product of two numbers is equal to the product of their square roots. In other words, for any non-negative numbers a and b, the square root of the product of a and b equals the product of the square roots of a and b.

The equivalent expression to √(ab) using the product property of roots is √a * √b. The reason is that by definition of the product property of roots, the square root of the product of a and b is equal to the square root of a multiplied by the square root of b, that is, √(ab) = √a * √b. Therefore, the correct answer is option A, which is √(ab).

To know more about square root  visit :-

https://brainly.com/question/29286039

#SPJ11

Here's the LaTeX representation of the explanation:

To determine whether the series [tex]$\sum \frac{3 \sin(k)}{4k^2}$[/tex] converges or diverges, we can use the comparison test or the limit comparison test.

Let's use the limit comparison test with the series [tex]$\sum \frac{1}{k^2}$.[/tex]

Taking the limit as [tex]$k$[/tex] approaches infinity of the ratio of the two series, we have:

[tex]\[\lim_{k \to \infty} \left[ \frac{\frac{3 \sin(k)}{4k^2}}{\frac{1}{k^2}} \right]\][/tex]

Simplifying, we get:

[tex]\[\lim_{k \to \infty} \left[ \frac{3 \sin(k) \cdot k^2}{4} \right]\][/tex]

Since the limit of [tex]$\sin(k)$ as $k$[/tex] approaches infinity does not exist, the limit of the ratio also does not exist. Therefore, the limit comparison test is inconclusive.

In this case, we can try using the direct comparison test by comparing the given series with a known convergent or divergent series.

For example, we can compare the given series with the series [tex]$\sum \frac{1}{k^2}$.[/tex] Since [tex]$\sin(k)$[/tex] is bounded between -1 and 1, we have:

[tex]\[\left| \frac{3 \sin(k)}{4k^2} \right| \leq \frac{3}{4k^2}\][/tex]

The series  [tex]$\sum \frac{3}{4k^2}$[/tex]  is a convergent  [tex]$p$[/tex] -series with [tex]$p = 2$[/tex]. Since the given series is smaller in magnitude, it must also converge.

Therefore, the series  [tex]$\sum \frac{3 \sin(k)}{4k^2}$[/tex] converges.

To know more about convergent visit-

brainly.com/question/17156453

#SPJ11

The equation that describes the simple harmonic motion of the particle is:

x = 7 * sin(2t + φ)

The equation that describes the simple harmonic motion of a particle moving uniformly around a circle can be represented as:

x = A * sin(ωt + φ)

In this equation:

x represents the displacement of the particle at time t.

A represents the amplitude of the motion.

ω represents the angular frequency or angular speed of the motion.

t represents time.

φ represents the phase constant.

In the given scenario, the particle is moving uniformly around a circle of radius 7 units, with an angular speed of 2 radians per second. In circular motion, the displacement can be represented by the arc length along the circumference of the circle.

Since the angular speed is 2 radians per second, the angular frequency (ω) is also 2 radians per second.

Since the particle is moving uniformly, the amplitude of the motion (A) is equal to the radius of the circle, which is 7 units.

The phase constant (φ) determines the initial position of the particle at t = 0.

for more such questions on harmonic motion

https://brainly.com/question/29159741

#SPJ8

The limit of g(x) as x approaches infinity is 2.

Given the slope field for the differential equation dy/dx = y^2(4 - y^2), we are interested in finding the behavior of the solution g(x) as x approaches infinity.

Looking at the slope field, we observe that as y approaches 2, the slope of the solution curve becomes steeper. This suggests that as x increases, g(x) approaches a horizontal asymptote at y = 2.

Since the initial condition g(-2) = -1 is below the asymptote at y = 2, the solution curve must approach the asymptote from below. As x approaches infinity, g(x) gets closer and closer to the asymptote at y = 2, indicating that the limit of g(x) as x approaches infinity is 2.

So, the correct answer is D. 2.

Learn more about Probability

brainly.com/question/31828911

#SPJ11

The value of the integral for both curves is `(1/6) (37^1/2 - 1)`.

Given that we have to evaluate the integral `integral_C x ds`, where C is the curve (0,0) to (4,2) and the curve (0,0) to (1,3).a.

Straight line segment x=t, y=t/2 from (0,0) to (4,2)

Given that the equation of the line is x=t and y=t/2 and the limit is from (0,0) to (4,2). We have to find `integral_C x ds`.

As we know that the arc length of a curve C, in parametric form is `s= ∫ sqrt(dx/dt)^2 + (dy/dt)^2 dt`

By using the above formula, we get `ds = sqrt(1^2 + (1/2)^2) dt = sqrt(5)/2 dt`.

Now, the integral is `integral

_C x ds = ∫_0^4 (t) (sqrt(5)/2) dt`

Solving the above integral, we get∫(0 to 4) t ds = [sqrt(5)/2 × t^2/2] from 0 to 4= (1/2) × 4 × sqrt(5) = 2 sqrt(5)b.

Parabolic curve x=t, y=3t^2 from (0,0) to (1,3)

Given that the equation of the line is x=t and y=3t^2 and the limit is from (0,0) to (1,3).

We have to find `integral_C x ds`.

As we know that the arc length of a curve C, in parametric form is `s= ∫ sqrt(dx/dt)^2 + (dy/dt)^2 dt`

By using the above formula, we get `ds = sqrt(1^2 + (6t)^2) dt = sqrt(1 + 36t^2) dt`.

Now, the integral is `integral_C x ds = ∫_0^1 (t)(sqrt(1 + 36t^2))dt`

To solve the above integral, we use the u-substitution.

Let u = 1+ 36t^2, then du/dt = 72t dt or dt = du/72t

Substituting this value in the integral, we get

∫_(u=1)^(u=37) 1/72 (u-1)^(1/2) du

= (1/72) ∫_(u=1)^(u=37) (u-1)^(1/2) duLet u - 1

= z², du = 2z dz

Then, `ds= z dz/6` and the integral becomes `ds= z dz/6

= u^1/2 / 6

= (1/6) (37^1/2 - 1)`.H

ence, `∫_0^1 (t) ds = ∫_1^37 1/6 (u - 1)^(1/2) du

= (1/6) (37^1/2 - 1)`

Therefore, the value of the integral for both curves is `(1/6) (37^1/2 - 1)`.

Know more about integral here:

https://brainly.com/question/30094386

#SPJ11

To calculate the probability for each event, we need to determine the relative frequency of each event by dividing the frequency of each event by the total number of samples (50 in this case).

Let's calculate the probability for each event:

Event A: pH 5.00 - 5.10 (Frequency: 11)

P(Event A) = Frequency of Event A / Total number of samples

P(Event A) = 11 / 50 = 0.22

Event B: pH 5.10 - 5.20 (Frequency: 5)

P(Event B) = Frequency of Event B / Total number of samples

P(Event B) = 5 / 50 = 0.10

Event C: pH 5.20 - 5.30 (Frequency: 11)

P(Event C) = Frequency of Event C / Total number of samples

P(Event C) = 11 / 50 = 0.22

Event D: pH 5.30 - 5.40 (Frequency: 10)

P(Event D) = Frequency of Event D / Total number of samples

P(Event D) = 10 / 50 = 0.20

Event E: pH > 5.40 (Frequency: 13)

P(Event E) = Frequency of Event E / Total number of samples

P(Event E) = 13 / 50 = 0.26

The probabilities for each event are as follows:

P(Event A) = 0.22

P(Event B) = 0.10

P(Event C) = 0.22

P(Event D) = 0.20

P(Event E) = 0.26

These probabilities represent the likelihood of randomly selecting a water sample that falls within each respective pH range.

To know more about probabilities visit-

brainly.com/question/32758775

#SPJ11

The height of the Filipino men follows a normal distribution with mean 64.2 inches and standard deviation 1.7 inches.

The height of the tallest among the shortest 65% of the respondents is 65.305 inches.

Now we need to calculate the following questions:
Find the probability that his height is less than 61.8 inches.
Since the variable height follows a normal distribution, we can use the standard normal distribution to calculate the probability.

The standard normal distribution is N(0, 1), where the mean is 0 and standard deviation is 1.

We can use the Z score formula to transform the normal distribution into a standard normal distribution.

z = (x - μ) / σ, where

x = 61.8,

μ = 64.2, and

σ = 1.7
Substituting the values into the formula,

z = (61.8 - 64.2) / 1.7

= -1.4129
Using the Z table or calculator, we can find the probability that the participant's height is less than 61.8 inches is 0.0786.  

The probability that his height is more than 68 inches is:

z = (x - μ) / σ, where

x = 68, μ = 64.2, and

σ = 1.7

Substituting the values into the formula,

z = (68 - 64.2) / 1.7

= 2.2353
Using the Z table or calculator, we can find the probability that the participant's height is more than 68 inches is 0.0125.

This is also the probability that the participant's height is less than 68 inches.
The proportion of respondents who are more than 68 inches tall is 0.0125.

So, the number of respondents expected to be more than 68 inches tall is:

500 × 0.0125 = 6.25 or 6 respondents.
The probability that his height is between 67 and 67.5 inches is:
The z-score for 67 is (67 - 64.2) / 1.7 = 1.647

The z-score for 67.5 is (67.5 - 64.2) / 1.7 = 1.941

Using the Z table, we can find the probability that the participant's height is between 67 and 67.5 inches is

P(1.647 < z < 1.941) = P(z < 1.941) - P(z < 1.647)

= 0.9738 - 0.9505

= 0.0233
The tallest among the shortest 65% of the respondents is:

The probability that the participant's height is less than k is 0.65.

We need to find k such that P(X < k) = 0.65.

Using the Z score formula,

z = (x - μ) / σ

Substituting the values into the formula,
0.65 = (k - 64.2) / 1.7k - 64.2

= 0.65 × 1.7k - 64.2

= 1.105k

= 65.305
So, the height of the tallest among the shortest 65% of the respondents is 65.305 inches.

To visit more about distribution visit:

https://brainly.com/question/29664127

#SPJ11

By Bonferroni's method, given 6 levels of a factor, there are 15 comparisons.

The correct option is letter e. 15.

Bonferroni's method is an adjustment to significance testing. If you are conducting multiple hypotheses testing, the Bonferroni correction adjusts for the number of comparisons that you're making. It's a process for preventing Type I errors in significance testing. Bonferroni's method lowers the risk of making a Type I error by multiplying the p-value of each test by the number of comparisons. It raises the threshold for statistical significance, resulting in fewer false positives.

When we carry out a research experiment with a single factor, we may assign that factor various levels, which are different values of the independent variable that we are studying. The amount of levels a factor may have is usually two or more. In the study of factors, each stage is a distinct and measurable feature of the study factor that aids in the definition and description of the experiment. The number of treatment levels in an experiment is referred to as the factor's number of levels.

Comparisons are the difference between two or more elements or groups, and the purpose of these comparisons is to determine the variations between the elements. In statistics, we make comparisons between two or more groups to learn about the variations between the groups.

To know more about hypotheses testing please visit :

https://brainly.com/question/4232174

#SPJ11

The expected value of the sample mean, denoted as E(µ), is equal to the population mean µ, while the population variance of the sample mean, denoted as Var(µˆ), is equal to the population variance σ² divided by the sample size n. Therefore, the expected value of the sample mean is µ, and the population variance of the sample mean is σ²/n.

The expected value (mean) of the sample mean, denoted as E(µ), is equal to the population mean µ. In other words, E(µ) = µ.

The population variance of the sample mean, denoted as Var(µ), is equal to the population variance σ² divided by the sample size n. In other words, Varµ) = σ²/n.

So, to summarize:

Expected value of the sample mean: E(µ) = µ

Population variance of the sample mean: Var(µ) = σ²/n

To know more about population variance,

https://brainly.com/question/30611835

#SPJ11

Therefore, the supplies travel approximately 6.928 feet horizontally on the conveyor belt.

To determine how far the supplies travel horizontally on the conveyor belt, we can use trigonometry.

Given that the second floor is 12 feet higher and the belt makes a 60-degree angle with the ground, we can consider the vertical distance (rise) as the opposite side and the horizontal distance (run) as the adjacent side of a right triangle.

Using the trigonometric function tangent (tan), we can calculate the horizontal distance:

tan(60 degrees) = opposite/adjacent

tan(60 degrees) = 12 feet/run

Rearranging the equation to solve for run:

run = 12 feet / tan(60 degrees)

run ≈ 12 feet / 1.732 (rounded to three decimal places)

run ≈ 6.928 feet (rounded to three decimal places)

To know more about conveyor belt,

https://brainly.com/question/1550732

#SPJ11

The given data is [tex]1.316, 1.308, 1.321, 1.303, 1.311[/tex], and [tex]1.310[/tex].  It is essential to look at the data and determine if the data is following a normal distribution or not.

One of the ways to determine if the data is normally distributed or not is by making a histogram. It is a visual display of data that shows how often the different categories, or data values, occur. The following table gives the frequency of the given data.

The histogram shows that the data is roughly symmetric and follows the bell-shaped curve.

It is appropriate to use the curve to find the average thickness of the metal. The average of the given data is the sum of the measurements divided by the total number of measurements.

The sum of the measurements is [tex]1.316 + 1.308 + 1.321 + 1.303 + 1.311 + 1.310 = 7.169.[/tex]

The total number of measurements is 6.

The average thickness of the metal is [tex]7.169/6 = 1.195[/tex].

The curve should be used to find the average thickness of the metal.

To know more about distribution visit:

https://brainly.com/question/29664127

#SPJ11

The missing information in the question makes it difficult to provide a complete answer. However, based on the provided information, the missing values can be calculated.

Total number of subjects with positive test results = 142Number of false positive results = 25

Number of true positive results = 142 - 25 = 117

Therefore, number of true positive results = 11790% of the actual users would test positive

Number of actual users = (117/0.9) ≈ 130Number of false negative results = Total actual users - Number of true positive results= 130 - 117 = 13

Finally, the number of true negative results can be calculated using the specificity of the test, which is the probability of testing negative given that the person did not use marijua-na (true negative rate). Let's assume the specificity of the test is 95%.Therefore, number of false negative results = 13

Number of true negative results = (142 - 13 - 25)/0.95 ≈ 103

The summary of the calculations is as follows:Number of true positive results = 117Number of false positive results = 25Number of false negative results = 13Number of true negative results = 103

Learn more about subjects click here:

https://brainly.com/question/29757860

#SPJ11

The conclusion is: "Reject the null hypothesis."

To determine whether the average time to complete an obstacle course differs when a patch is placed over the right eye compared to when a patch is placed over the left eye, we can perform a paired t-test.

H₀ (null hypothesis): μd = 0 (the mean difference is zero)

Hₐ (alternative hypothesis): μd ≠ 0 (the mean difference is not equal to zero)

The test statistic for this analysis is a t-test because the sample size is small (n = 8) and we assume a normal distribution.

To calculate the test statistic and p-value, we need to compute the differences in completion times for each volunteer and then perform a one-sample t-test on these differences.

The differences between completion times (Right - Left) are as follows:

2 0 0 4 2 5 0 5

Calculating the mean (xd) and standard deviation (sd) of the differences:

xd = (2 + 0 + 0 + 4 + 2 + 5 + 0 + 5) / 8 = 2.5

sd = √[(Σ(xd - xd)²) / (n - 1)]

= √[(2-2.5)² + (0-2.5)² + (0-2.5)² + (4-2.5)² + (2-2.5)² + (5-2.5)² + (0-2.5)² + (5-2.5)²] / (8-1)

= √[0.25 + 6.25 + 6.25 + 2.25 + 0.25 + 6.25 + 6.25 + 2.25] / 7

= √(30.75 / 7)

≈ √4.393

≈ 2.096

The test statistic (t) is calculated as t = (xd - μd) / (sd / √n)

In this case, μd is assumed to be zero.

t = (2.5 - 0) / (2.096 / √8)

≈ 2.5 / (2.096 / 2.828)

≈ 2.5 / 0.741

≈ 3.374

Looking up the p-value corresponding to this t-value and 7 degrees of freedom in a t-distribution table or using a calculator, we find that the p-value is approximately 0.023 (rounded to three decimal places).

At the 0.01 level of significance, since the p-value (0.023) is less than the significance level (0.01), we reject the null hypothesis.

Therefore, the conclusion is: "Reject the null hypothesis."

Learn more about hypothesis test click;

https://brainly.com/question/17099835

#SPJ4

Therefore, the series 3 - 5 + 25 - 125 + 625 - ... diverges.

To determine whether the series converges or diverges, we need to examine the pattern and behavior of the terms.

The given series is:

3 - 5 + 25 - 125 + 625 - ...

We can see that the terms alternate in sign and increase in magnitude. This pattern resembles a geometric series with a common ratio of -5/3.

To determine if the series converges or diverges, we can check the absolute value of the common ratio. If the absolute value of the common ratio is less than 1, the series converges. If the absolute value is greater than or equal to 1, the series diverges.

In this case, the absolute value of the common ratio is |-5/3| = 5/3, which is greater than 1.

Since the absolute value of the common ratio is greater than 1, the series diverges.

To know more about series,

https://brainly.com/question/31969875

#SPJ11

The series 3 - 5 + 25 - 125 + 625 - ...  is diverges.

To determine whether the series 3 - 5 + 25 - 125 + 625 - ... converges or diverges, we can observe that the terms alternate between positive and negative values, and the magnitude of the terms increases.

This series can be expressed as a geometric series with the first term (a) equal to 3 and the common ratio (r) equal to -5/3. The formula for the sum of a convergent geometric series is given by:

S = a / (1 - r),

where S is the sum of the series, a is the first term, and r is the common ratio.

In this case, |r| = |-5/3| = 5/3 > 1, which means the common ratio is greater than 1 in magnitude. Therefore, the series diverges.

Hence, the series 3 - 5 + 25 - 125 + 625 - ... diverges.

To know more about series,

brainly.com/question/31969875

#SPJ11

The likelihood of Annika buying 19 tickets until she wins is approximately 0.4877, and the likelihood of Tommy buying 16 tickets until he wins is approximately 0.5488.

To determine the likelihood of Annika buying 19 tickets and Tommy buying 16 tickets until they each have their first win, we need to calculate the probabilities of these specific scenarios occurring.

For Annika:

The probability of Annika winning on any given ticket is 0.050.

The probability of Annika not winning on any given ticket is 1 - 0.050 = 0.950.

The likelihood of Annika buying 19 tickets until she wins can be calculated as the probability of not winning on the first 18 tickets (0.950^18) multiplied by the probability of winning on the 19th ticket (0.050).

P(Annika buys 19 tickets) = (0.950^18) * 0.050

For Tommy:

The probability of Tommy winning on any given ticket is also 0.050.

The probability of Tommy not winning on any given ticket is 1 - 0.050 = 0.950.

The likelihood of Tommy buying 16 tickets until he wins can be calculated as the probability of not winning on the first 15 tickets (0.950^15) multiplied by the probability of winning on the 16th ticket (0.050).

P(Tommy buys 16 tickets) = (0.950^15) * 0.050

Calculating these probabilities:

P(Annika buys 19 tickets) ≈ 0.950^18 * 0.050 ≈ 0.4877

P(Tommy buys 16 tickets) ≈ 0.950^15 * 0.050 ≈ 0.5488

Therefore, the likelihood of Annika buying 19 tickets until she wins is approximately 0.4877, and the likelihood of Tommy buying 16 tickets until he wins is approximately 0.5488.

Learn more about likelihood here

https://brainly.com/question/30390037

#SPJ11

The ANOVA summary table (o= 0.01) would be as follows: Source SS d f MS F P Between 288.618 3 96.206 3.847 0.0285Within 375.12 15 25.008 Total 663.738 18 Explanation :In this question, we are given that a psychologist would like to know whether the season (autumn, winter, spring, and summer) has any consistent effect on people's sexual activity.

In the middle of each season, a psychologist selects a random sample of 19 students. Each individual is given a sexual activity questionnaire. A one-factor ANOVA was used to analyze these data .In order to complete the ANOVA summary table, we need to know the values of SS,  d f , MS, F and P for the between-group and within-group variations :SS (sum of squares) - It is the sum of squared deviations of the individual observations from the mean of the sample.

It is a measure of variation .DF (degrees of freedom) - It is the number of observations that are free to vary after the estimate of a population parameter has been obtained. It is a measure of the sample size.MS (mean square) - It is the sum of squares divided by the degrees of freedom .F - It is the ratio of variation between groups to the variation within groups .P - It is the probability of obtaining a test statistic as extreme or more extreme than the one observed if the null hypothesis were true. It measures the significance level of the test.

To know more about ANOVA visit :

https://brainly.com/question/29537928

#SPJ11

150lb is the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers.

Given that the gondola is rated for a load limit of 3750 lb, the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers can be calculated as follows:

The maximum load that the gondola can handle is:

3750 lb = 25 passengers × mean weight per passenger

This gives the mean weight per passenger as:

Mean weight per passenger = 3750/25 = 150

Therefore, the maximum mean weight of the passengers if the gondola is filled to the stated capacity of 25 passengers is 150 lb.

To learn more about mean, refer below:

https://brainly.com/question/31101410

#SPJ11

According to the statement the statistic is often calculated using the formula t = (x1 - x2) / se, where se is the standard error.

When two groups' means are compared, a t-test is used to determine if they are significantly different. A t-test is a statistical measure that aids in determining whether the means of two groups are significantly different from one another. To obtain the degrees of freedom for the t-test, use the following formula: df = n1 + n2 - 2 = 10 + 10 - 2 = 18.That is, the degrees of freedom (df) for the t-test when x1 = 62, x2 = 60, n1 = 10, n2 = 10, s1 = 2.45, s2 = 3.16 is 18. As seen here, the statistic is often calculated using the formula t = (x1 - x2) / se, where se is the standard error.

To know more about t-statistic visit :

https://brainly.com/question/31577270

#SPJ11

The probability that the car needs no work on the transmission is 0.9.

Given: Let E be the event that a new car requires engine work under warranty, P(E) = 0.04

Let T be the event that the car requires transmission work under warranty, P(T) = 0.1

P(E and T) = 0.03

(a) Find the probability that the car needs work on either the engine, the transmission, or both.

We know that, P(E or T) = P(E) + P(T) - P(E and T)

Putting the values, we get:P(E or T) = 0.04 + 0.1 - 0.03 = 0.11

Therefore, the probability that the car needs work on either the engine, the transmission, or both is 0.11.

(b) Find the probability that the car needs no work on the transmission.

The probability that the car needs no work on the transmission is given by:P(not T) = 1 - P(T)

Substituting P(T) = 0.1, we get:

P(not T) = 1 - 0.1 = 0.9

Therefore, the probability that the car needs no work on the transmission is 0.9.

Know more about the probability

https://brainly.com/question/25839839

#SPJ11

(a) The function f(x) = x²/3 is a positive function.

(b) The integral from -∞ to ∞ does not converge to 1. Therefore, the integral from +[infinity] to -[infinity] of f(x)dx ≠ 1.

a) Is it a positive function?

Yes, f(x) = x²/3 is a positive function.

The square of a number is always positive. And a positive value divided by a positive value will also yield a positive value.

Therefore, the function f(x) = x²/3 is a positive function.

b) Check if the integral from +[infinity] to -[infinity] of f(x)dx =1Since the function is not defined at x = 0, we must find the integral of the function for two separate intervals: from -∞ to -1 and from -1 to

∞.∫[−∞,−1]f(x)dx=∫[−∞,−1](x2/3)dx

= 3/5∫[−∞,∞]f(x)dx

= ∫[−∞,−1](x2/3)dx + ∫[−1,∞](x2/3)dx

=3/5 + 3/5

=6/5

However, the integral from -∞ to ∞ does not converge to 1. Therefore, the integral from +[infinity] to -[infinity] of f(x)dx ≠ 1.

Know more about the function here:

https://brainly.com/question/22340031

#SPJ11